Search Results

Search found 95201 results on 3809 pages for 'system data sqlite'.

Page 270/3809 | < Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >

  • Forwarding data between two interfaces

    - by user84471
    I installed Ubuntu server 12.04 after that I installed dhcp3-server and configured it like this: At isc-dhcp-server INTERFACES="eth0" And in dhcpd.conf # A slightly different configuration for an internal subnet. subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.5 192.168.1.100; option domain-name-servers 192.168.1.1; option domain-name "nazwa.local"; option routers 192.168.1.1; option broadcast-address 192.168.1.255; default-lease-time 600; max-lease-time 7200; } Also I have two eth interfaces: # second netowrk interface auto eth0 iface eth0 inet static address 192.168.1.1 netmask 255.255.255.0 # The primary network interface auto eth1 iface eth1 inet dhcp When I plug computer to eth0 I get propertly ip adress but I can't visit any sites. I do even this: echo 1 > /proc/sys/net/ipv4/ip_forward

    Read the article

  • Making an SSD drive the primary boot/system drive

    - by David Ebbo
    [Not much of a hardware guy, so please excuse my ignorance :)] I just ordered an HP Pavilion Elite HPE-450t (desktop), which came with Win7 installed on the hard drive, using two partitions (C: and D:). Separately, I bought a 128GB SSD that I intend to use as my system drive. I got it in there and connected it, and right now, it's the J: drive (which was the first letter available in disk manager). My goal is for the SSD to get a clean OS install be the C: drive, and to clean out the other hard drive and make it D: (for misc data storage) Question #1: the motherboard has two SATA plugs. Does it matter which one I use for which drive? Question #2: what's the right way to install Win7 on the SSD in a way that it ends up being the C: drive? Do I need to switch some things around in the current Win7 that came with it, are can I do all that while installing Win7 on the SSD?

    Read the article

  • 5 Reasons You Must Start Capturing Baseline Data

    It is widely acknowledged within the SQL Server community that baselines represent valuable information that DBAs should capture. Unfortunately, very few companies manage to log and report on this information, and DBAs are then forced to troubleshoot from the hip and scramble to find evidence to prove that the database is not the problem. This article will make a compelling argument for why DBAs must start capturing baseline information, and will create a roadmap for subsequent posts.

    Read the article

  • In need of assistance for recovering a lost partition

    - by Tek
    The program that has worked for the most part is Active@ Partition Recovery. I'm so close but yet so far from recovering my data. Okay so here's what happens. In the following screenshot (blanked out a folder and filename with profanity in case some of you guys are at work :P), it detects the partition I accidentally deleted with ALL 100% of my data listed. Of course, I didn't write ANY data to that drive after I did this. But when I click "recover" and finishes the recovery process, in Windows I click on the partition that was just was just recovered... It's EMPTY. The program seems to be able to see my lost files, but when I recover the partition windows doesn't seem to think the same =( Things I tried: I tried running a chkdsk /r /f after I recovered the partition, apparently it couldn't find any errors. Tried using other software like TestDisk to recover the partition, but they (all) act similar to Windows in that it detects the (missing) partition but when I browse it there's no files. The partition is there along with all the file and data information. The sector information is also in the screenshot, is there any way I can use this to my advantage in recovering my data? Other information: Dualboot: Win8 / Ubuntu 12.10 x64 1TB Internal desktop drive, GPT Layout, NTFS formatted drive, 64K allocation size.

    Read the article

  • APC has no system cache entries

    - by lazzio
    I have 2 web servers to provide PHP websites. One server is : Apache + PHP-FPM + APC The other : Apache with MPM-itk + APC. For both of these servers, APC has no cache system entries but only users cache entries as you can see on the screenshot. APC with only users cache entries APC configuration is : apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 2 apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.shm_segments 1 apc.shm_size 256 apc.stat 1 apc.stat_ctime 0 apc.ttl 7200 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 7200 apc.write_lock 1 Does anyone know why APC acts like this and how to make it work well ? Thank you for your help!

    Read the article

  • Manipulating XML Data in SQL Server

    When the average database developer is obliged to manipulate XML, either shredding it into relational format, or creating it from SQL, it is often done 'at arms length'. A shame, since effective use of techniques that go beyond the basics can save much code, "It really helped us isolate where we were experiencing a bottleneck"- John Q Martin, SQL Server DBA. Get started with SQL Monitor today to solve tricky performance problems - download a free trial

    Read the article

  • glTexImage2D not loading my data

    - by Clyde
    Can anyone suggest why this code doesn't work? When I draw using this texture all I get is black. If I use GLUtils.texImage2D() to load a png file, it works correctly. ByteBuffer bb = ByteBuffer.allocateDirect(128*128*4).order(ByteOrder.nativeOrder()); bb.position(0); for(int row = 0; row != 128; row++) { for(int i = 0 ; i != 128 ; i++) { bb.put((byte)0x80); bb.put((byte)0xFF); bb.put((byte)0xFF); bb.put((byte)i); } } int[] handle = new int[1]; GLES20.glEnable(GLES20.GL_TEXTURE_2D); GLES20.glGenTextures(1, handle, 0); DrawAdapter.checkGlError("Gen textures"); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, handle[0]); DrawAdapter.checkGlError("Bind textures"); bb.position(0); GLES20.glTexImage2D(GLES20.GL_TEXTURE_2D, 0, GLES20.GL_RGBA, 128, 128, 0, GLES20.GL_RGBA, GLES20.GL_UNSIGNED_BYTE, bb); DrawAdapter.checkGlError("glTexImage2D"); return handle[0];

    Read the article

  • Most efficient Implementation a Tree in C++

    - by Topo
    I need to write a tree where each element may have any number of child elements, and because of this each branch of the tree may have any length. The tree is only going to receive elements at first and then it is going to use exclusively for iterating though it's branches in no specific order. The tree will have several million elements and must be fast but also memory efficient. My plan makes a node class to store the elements and the pointers to its children. When the tree is fully constructed, it would be transformed it to an array or something faster and if possible, loaded to the processor's cache. Construction and the search on the tree are two different problems. Can I focus on how to solve each problem on the best way individually? The construction of has to be as fast as possible but it can use memory as it pleases. Then the transformation into a format that give us speed when iterating the tree's branches. This should preferably be an array to avoid going back and forth from RAM to cache in each element of the tree. So the real question is which is the structure to implement a tree to maximize insert speed, how can I transform it to a structure that gives me the best speed and memory?

    Read the article

  • "BAD ARCHIVE MIRROR" error while installing ubuntu server 12.04

    - by Hirdesh - Technonimal
    I downloaded the server version of Ubuntu from Ubuntu's official site. Created a Bootable USB from the ISO file I downloaded. I connected through Internet using DHCP in the installation process. While I was installing it on my Desktop Computer (pentium D 1 GB RAM) I have this error "Bad Archive Mirror". I also found 2-3 questions with same problem on forum but I didn't get solution of my problem from them.

    Read the article

  • Content light website and Google - Tell google it's a listings site (as opposed shop, reviews or restaurants)

    - by Doug Firr
    I have a listings style website. Due to the nature of this (listings) the site is content light. Each page is typically less that 50 words but there are many pages. The site in question has had a ton of media coverage and so has some great inbound links from places like Wired, Fast Company, Canada Broadcasting Corporation and many many other bloggers, media websites and recycle related niche authors (It's a recycling site). But Google really ignores it. Traffic from search is very very low - less than 5% of all traffic. I know that using markup you can tell Google whether your site is a restaurant, article, review, shop, local business and a few other categories (https://www.google.com/webmasters/markup-helper/u/0/). Is there a way to tell Google that my site is a listings site? I suspect, but do not know for sure, that part of the problem is that Google simply does not know what my site is? It's a crowdmap where people post curbalerts. The information is useful to people but it is presented in a short, concise way - a pin on a map, a picture and a short description. Adding anything further is not necessary for the site's intended purpose. 1st question - how best to tell the search engines what y site is - listings and not some spammy website? Any recommendations in improving our site's Search presence? You can take a look here if interested: http://tinyurl.com/lxg4hn7

    Read the article

  • Should I always encapsulate an internal data structure entirely?

    - by Prog
    Please consider this class: class ClassA{ private Thing[] things; // stores data // stuff omitted public Thing[] getThings(){ return things; } } This class exposes the array it uses to store data, to any client code interested. I did this in an app I'm working on. I had a ChordProgression class that stores a sequence of Chords (and does some other things). It had a Chord[] getChords() method that returned the array of chords. When the data structure had to change (from an array to an ArrayList), all client code broke. This made me think - maybe the following approach is better: class ClassA{ private Thing[] things; // stores data // stuff omitted public Thing[] getThing(int index){ return things[index]; } public int getDataSize(){ return things.length; } public void setThing(int index, Thing thing){ things[index] = thing; } } Instead of exposing the data structure itself, all of the operations offered by the data structure are now offered directly by the class enclosing it, using public methods that delegate to the data structure. When the data structure changes, only these methods have to change - but after they do, all client code still works. Note that collections more complex than arrays might require the enclosing class to implement even more than three methods just to access the internal data structure. Is this approach common? What do you think of this? What downsides does it have other? Is it reasonable to have the enclosing class implement at least three public methods just to delegate to the inner data structure?

    Read the article

  • Javascript storing data

    - by user985482
    Hi I am a beginner web developer and am trying to build the interface of a simple e-commerce site as a personal project.The site has multiple pages with checkboxes.When someone checks an element it retrives the price of the element and stores it in a variable.But when I go to the next page and click on new checkboxes products the variable automaticly resets to its original state.How can I save the value of that variable in Javascript? This is the code I've writen using sessionStorage but it still dosen't work when I move to next page the value is reseted. How can I wright this code so that i dosen't reset on each page change.All pages on my website use the same script. $(document).ready(function(){ var total = 0; $('input.check').click(function(){ if($(this).attr('checked')){ var check = parseInt($(this).parent().children('span').text().substr(1 , 3)); total+=check; sessionStorage.var_name=0 + total; alert(sessionStorage.var_name); }else{ var uncheck = parseInt($(this).parent().children('span').text().substr(1 , 3)); total-=uncheck; } })

    Read the article

  • Issues running alongside windows and connecting to wireless network

    - by user292247
    Okay so I'm trying to get started with ubuntu but I'm encountering a couple problems: When I boot up the CD and try to install, it does not recognize that I have windows 7 installed and just sees it as unallocated space so the only way I've been able to install it is by wiping the drive which was fine, but it'd be nice to be able to boot either. And secondly, I cannot figure out how to get wireless working. When I try to connect on the initial installation process it tells me to connect to my adapter and just asks for a password. I suspect it could be a driver issue but I wouldn't know where to find it. I have an AR9485 atheros adapter and am attempting to run ubuntu 14.04. Thanks

    Read the article

  • Data structures for a 3D array

    - by Smallbro
    Currently I've been using a 3D array for my tiles in a 2D world but the 3D side comes in when moving down into caves and whatnot. Now this is not memory efficient and I switched over to a 2D array and can now have much larger maps. The only issue I'm having now is that it seems that my tiles cannot occupy the same space as a tile on the same z level. My current structure means that each block has its own z variable. This is what it used to look like: map.blockData[x][y][z] = new Block(); however now it works like this map.blockData[x][y] = new Block(z); I'm not sure why but if I decide to use the same space on say the floor below it wont allow me to. Does anyone have any ideas on how I can add a z-axis to my 2D array? I'm using java but I reckon the concept carries across different languages.

    Read the article

  • Ubuntu won't stay installed

    - by tommythm227
    I recently experienced OS problems with Windows 8 so I decided to wipe my hard drive and install Ubuntu using a usb boot. I am able to "Try Ubuntu" or choose to install instantly, however, after installation it asks me to restart my computer but when I do this I receive the same installation options I originally had, "Try Ubuntu", "Install", "OEM Install", "Repair Disk". I initially thought this was the result of leaving the boot usb in, so I tried reinstalling, but now I just receive a message saying "No boot disc or boot disc failed". This happens with any type of install I do, I've tried clearing the hard drive multiple times, making a new boot usb, but nothing seems to help. I've tried reinstalling windows, but I encounter the same problem, without the usb I get an error. I have an Acer Aspire M3470, I cleared my hard drive and attempting to install via usb boot. I have a weird BIOS menu probably because of AMD but it's been hard to find information regarding my particular BIOS menu. HERE is an image of my BIOS menu

    Read the article

  • Linux- passwordless ssh from system (root) script

    - by redmoskito
    What's the easiest way to have a system script (running as root) execute remote commands over ssh? I've written some scripts that execute commands remotely via ssh, and they work great when I run them as myself, as I've set up ssh-agent and keys for passwordless login. I'd like to call these when my laptop docks and undocks. I've been successful at running arbitrary scripts when docking/undocking, but since the ACPI event scripts run as root, trying to run my ssh script fails during authentication. I tried using sudo with the -u and -i flags to simulate running the script as my user, e.g.: sudo -u redmoskito -i /home/redmoskito/bin/remote_command which successfully finds my private key and tries to use it, but the ssh-agent credentials are still missing, so it still needs my passphrase.

    Read the article

  • Does performing a System Refresh keep these folders?

    - by crayzeedude
    Alright, let's make this simple. I'm really contemplating performing a system refresh. What I've been looking for all over is if the process keeps some certain folders. Namely my Documents, Pictures, Videos, Downloads, and Desktop folders. There's some real valuable stuff in there, and I really want to know if refreshing my PC will keep these intact. Also, there is an application located at C:\Pesterchum that I would like to keep intact. Should I back it up, then copy it back into its original location after the refresh? Or will it be left untouched?

    Read the article

< Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >