Search Results

Search found 7513 results on 301 pages for 'patrick de amorim'.

Page 271/301 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

  • SVN and WebSVN with different users access restriction on multiple repositories on linux

    - by user55658
    and first of all sorry for my english. I've installed an ubuntu server 10.04.1 with apache2, subversion, svn_dav and websvn. (and others services of course, like php5, mysql 5.1, etc). I've configured my svn with multiple repositories, and each one with differents groups and users, like: /var/myrepos/repo1 group: mygroup1 /var/myrepos/repo2 group: mygroup2 /var/myrepos/repo3 user: johndoe With an easy access on svn_dav, works perfectly, ie: http://myserver/svnrepo1 accesibly only for users on mygroup1 with theirs users of linux and passwords of svn. Also works for the other repos with their users and groups. But when i tried with websvn, shows all repos without take care than if user on mygroup1 can view repo2 (that's i dont want do). You can login as any user on mygroup1, mygroup2, or johndoe, and you login into all repositories. I'll try to find a solution and I'll post the news, if anyone can helpme with this I'll preciated so much!!! Thanks for all I show my files: /etc/apache2/mods-available/dav_svn.conf <Location /svnrepo1> DAV svn SVNPath /var/myrepos/repo1 AuthType Basic AuthName "Repositorio Subversion de MD" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user </Location> <Location /websvn/> Options FollowSymLinks order allow,deny allow from all AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user </Location>

    Read the article

  • Expected IOPS for log writing on PS6000X SAN?

    - by dssz
    Customer is experiencing poor Sybase ASE 15 performance on a PS6000X SAN with 16 X 450GB 10K in RAID-50. The server is a Dell R710 running 2003 server R2 64bit in ESX 4.0.0,256968 I've used sqlio to benchmark the sequential write performance of 4KB blocks on the drive. sqlio -kW -t1 -s600 -dE -o1 -fsequential -b4 -BH -LS sqliotestfile.dat Result is 1900 IOPS. However, when Sybase is running a sustained workload of small inserts SAN HQ shows a consistent 590 IOPS (and 100% 4K write activity). It also shows that the write latency increases to 1.2ms from <1ms. Monitoring and tests in Sybase demonstrate the performance problem is IO related and in particular there is a lot of wait time writing to the log. The SAN indicates that write caching is enabled. What IOPS should the SAN be capable of for 4k sequential write activity? Also, with write caching enabled, shouldn't the controller be batching up the 4K writes into something more efficient? Also, any tips on Sybase on ESX would be appreciated.

    Read the article

  • Troubleshooting certificate issues

    - by Weezy
    I'm trying to access my (European Parliament) Webmail from a Linux/Firefox machine at the following address and I get security warning messages explaining that the identity of the site cannot be verified (the error message is in french). But this only happens with Linux/Firefox from one machine. Here's the address: https://webmail.europarl.europa.eu/ (and I'm trying to access it from my home, not from the EP). And here's the detailed error message: webmail.europarl.europa.eu utilise un certificat de sécurité invalide. Le certificat n'est pas sûr car l'autorité délivrant le certificat est inconnue. (Code d'erreur : sec_error_unknown_issuer) So basically, if I translate, it is telling that the webmail.europarl.europa.eu certificate is invalid because the authority that delivered the certificate is unknown. I do only get this invalid certificate thing on Linux/Firefox. From a MacBookPro running Safari, I go to what looks like the correct webmail login page. From the same Linux machine, but using another user account and Chrome instead of Firefox, I go to what looks like the correct webmail login page. So there are several possibilities, here are a few ones: Firefox is right and my Linux box has been hacked Firefox is right and detecting something that neither Chrome nor Safari is detecting (like, say, my router that may be hacked) Safari on the MacBook Pro and Chrome on Linux are both correct and it is just Firefox on Linux that is wrongly stressing me when everything is normal. How do I know which one of these possibilities (or any other) is correct? How can I troubleshoot what is going on with either Linux/Firefox or with the parliament's webmail?

    Read the article

  • Make dhcp assign same IP and hostname for different interfaces at one machine

    - by Egeshi
    I have a feeling that question itself looks stupid but it is not. Please let me clarify. I have dynamic DNS with BIND and NIS configured at my LAN and have laptop which I am using in both wireless and wired mode. I mean that sometimes I have to use wired interface to achieve higher throughput but most of time I don't need it and using wireless mode. Everything works great. Issue is that I want both interfaces get same IP from DHCP. Just for convenient firewall setup. If I add both hosts to dhcp in this manner # bt wireless host bt { hardware ethernet 00:1f:1f:62:60:28; fixed-address 172.16.77.110; } # bt wired host bt { hardware ethernet 00:14:22:b7:5a:de; fixed-address 172.16.77.110; } DHCP says logs following message dhcpd: Dynamic and static leases present for 172.16.77.110 dhcpd: Remove host declaration bt-wired or remove 172.16.77.110 dhcpd: from the dynamic address pool for 172.16/16 Host records are added outside of any subnet, but it makes no difference if I put them there, effect is still the same. This is not critical but either is not my whim because even if DHCP seems to work fine for that "bt" host, I cannot make connection TO it from remote machine anymore with this definitely incorrect DHCP config. I'd be thankful if one spares a minute for advice about how to configure DHCPD correctly. UPDATE. I realize that there's a soulution to assign different hostname in DHCP config but would like to use benefits of short host names.

    Read the article

  • How this could happen to my ftp server?

    - by srisar
    hi, again me, i just dont get why i m getting this message, when i try to connect my ftp server thorugh my wan address (112.135.26.115) its saying me, 530 user access denied but when i give the same data to http://ftptest.net the result is as follows... Status: Resolving address of 112.135.26.115 Status: Connecting to 112.135.26.115 Status: Connected, waiting for welcome message Reply: 220-FileZilla Server version 0.9.34 beta Reply: 220-written by Tim Kosse ([email protected]) Reply: 220 Please visit http://sourceforge.net/projects/filezilla/ Status: CLNT http://ftptest.net on behalf of 112.135.26.115 Reply: 200 Don't care Status: USER saravana Reply: 331 Password required for saravana Status: PASS ********* Reply: 230 Logged on Status: SYST Reply: 215 UNIX emulated by FileZilla Status: FEAT Reply: 211-Features: Reply: MDTM Reply: REST STREAM Reply: SIZE Reply: MLST type*;size*;modify*; Reply: MLSD Reply: AUTH SSL Reply: AUTH TLS Reply: UTF8 Reply: CLNT Reply: MFMT Reply: 211 End Status: PWD Reply: 257 "/" is current directory. Status: Current path is / Status: TYPE I Reply: 200 Type set to I Status: PASV Reply: 227 Entering Passive Mode (112,135,26,115,43,9) Status: MLSD Reply: 150 Connection accepted Listing: type=dir;modify=20100322113235; it_is_working!_Andrejs_Cainikovs_from_serverfault.com Listing: type=file;modify=20100322110559;size=5; New Text Document.txt Reply: 226 Transfer OK Status: Success can anyone say why this happens to me? please im trying the whole day!!

    Read the article

  • Linksys WAP54G v3.1 no access, power and link LED solid

    - by user142113
    I'm managing the Network of a small enterprise. A Linksys WAP54G v3.1 used to provide the WiFi network. I was called, because the device did not provide a WiFi network anymore. I first of all tried to ping the device via LAN, but there was no reaction. I've frequently reconnected the AP to the mains and always the POWER and the LINK LED keep solid, even if no network cable is connected. What I've done yet: Reset as documented: Pressed the RESET button for 10 seconds. After that I have tried to access the AP with a direct cable connection to my computer, that I've set to a static ip of 192.168.1.240, but i got no ping response on the default IP 192.168.1.245. Furthermore ipconfig reports "media disconnected". More complex reset method as described here http://bruceshankle.blogspot.de/2005/12/how-to-reset-linksys-wap54g.html as well had no effect. also tried to ping 192.168.1.1 without success Tried this method: http://www.daniweb.com/hardware-and-software/networking/threads/142437/linksys-wireless-access-point-problem#post680245 but there was no ping response when powering up. As well the tftp transfer timed out Finally tried to short pin 15 and 16 of the flash chip on the bottom side of the AP mainboard while booting to provoke a Checksum error. This should lead to the possibility to upload a firmware with tftp, as the AP stops booting and waits for a tftp connection on 192.168.1.1. But I've had no success. As well i've put pin 15 and 16 to ground while booting, also without an effect. After all that I still can't ping the AP, ipconfig still tells me "media disconnected". The POWER and LINK LED are solid. I would appreciate your answers

    Read the article

  • 2 nics. 2 Defaults Gateways

    - by andre.dias
    Here is my scenario: i have this server with 2 nics, each one with different IPs, connected to differents routers. Almost everything is configured whe way i need. Traffic coming from eth0 exits using eth0, traffic coming from eth1 exits using eth1. And there is a default gateway configured. $route: default IP 0.0.0.0 UG 0 0 0 eth0 With this configuration, the traffic generated in the server is going out using eth0 (lynx www.google.com for example). The problem is: the Internet link from eth0 went down today. The traffic coming from eth1 was ok...no problem. But the traffic generated in the server was a problem...the default gateway was out...no access do the Internet anymore (no more lynx www.google.com) So i added a new default gateway configuration, pointing to eth1. For 30 minutes i kept that way...2 default gateways, but just one was "working"...and everything was working just fine. But then i removed de eth0 gateway entry because, well, 2 default gateways is kind of weird. My question: is there any problem on keeping these 2 default gateways, one for each? So i don´t need to do nothing when one link go down again? $route: default IP1 0.0.0.0 UG 0 0 0 eth0 default IP2 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • Bridged network on OS X only gets UDP broadcast traffic

    - by a paid nerd
    I've created a bridged network Mac OS X 10.8.5 using ifconfig and TUNTAP for OS X to bridge my wireless connection, en0, with a virtual interface, tap0, which I can use for guest VMs: $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 28:cf:xx:xx:xx:xx inet6 xxxx::xxxx:xxxx:xxxx:xxxx%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.64 netmask 0xffffff00 broadcast 192.168.100.1 media: autoselect status: active bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) However, if I tcpdump -i tap0, I only see broadcast traffic. Shouldn't I see a mirror of everything on en0? (192.168.100.33, the host doing the broadcasting, is another unrelate, noisy server on my LAN.) (I asked a similar question here and will probably close it.)

    Read the article

  • needing storage integrity (write/read) test - for BASH

    - by Mr. Bash
    In need of shell scripts / bash commands to verify data integrity of local harddrives, usb-drives, etc, ... Like the famous www.heise.de/download/h2testw; or something that is at least common within repositories. (h2testw writes a specific datastring over and over onto the medium, then reads it again to verify if it was written correctly and displays write/read time/speed.) please no dd if=/dev/random of=/dev/sdx bs=1k && dd if=/dev/sdx of=/dev/null bs=1k since it won't verify if everything was written correctly. It is only a test if read/write is successful to the device. So far, I'm not too happy with badblocks -w -v /dev/sdx1 either, since it seems rather slow and I don't know what it exactly writes, and if it considers wear-leveling on flash media. There is also a program named F3 http://oss.digirati.com.br/f3/ that needs to be compiled. Designed after h2testw, the concept sounds interesting, i'd just rather have it as a ready to go bash script.

    Read the article

  • How to deduplicate 40TB of data?

    - by Michael Stauffer
    I've inherited a research cluster with ~40TB of data across three filesystems. The data stretches back almost 15 years, and there are most likely a good amount of duplicates as researchers copy each others data for different reasons and then just hang on to the copies. I know about de-duping tools like fdupes and rmlint. I'm trying to find one that will work on such a large dataset. I don't care if it takes weeks (or maybe even months) to crawl all the data - I'll probably throttle it anyway to go easy on the filesystems. But I need to find a tool that's either somehow super efficient with RAM, or can store all the intermediary data it needs in files rather than RAM. I'm assuming that my RAM (64GB) will be exhausted if I crawl through all this data as one set. I'm experimenting with fdupes now on a 900GB tree. It's 25% of the way through and RAM usage has been slowly creeping up the whole time, now it's at 700MB. Or, is there a way to direct a process to use disk-mapped RAM so there's much more available and it doesn't use system RAM? I'm running CentOS 6.

    Read the article

  • Very slow write performance on Debian 6.0 (AMD64) with DMCRYPT/LVM/RAID1

    - by jdelic
    I'm seeing very strange performance characteristics on one of my servers. This server is running a simple two-disk software-RAID1 setup with LVM spanning /dev/md0. One of the logical volumes /dev/vg0/secure is encrypted using dmcrypt with LUKS and mounted with the sync and noatimes flag. Writing to that volume is incredibly slow at 1.8 MB/s and the CPU usage stays near 0%. There are 8 crpyto/1-8 processes running (it's a Intel Quadcore CPU). I hope that someone on serverfault has seen this before :-(. uname -a 2.6.32-5-xen-amd64 #1 SMP Tue Mar 8 00:01:30 UTC 2011 x86_64 GNU/Linux Interestingly, when I read from the device I get good performance numbers: reading without encryption: $ dd if=/dev/vg0/secure of=/dev/null bs=64k count=100000 100000+0 records in 100000+0 records out 6553600000 bytes (6.6 GB) copied, 68.8951 s, 95.1 MB/s reading with encryption: $ dd if=/dev/mapper/secure of=/dev/null bs=64k count=100000 100000+0 records in 100000+0 records out 6553600000 bytes (6.6 GB) copied, 69.7116 s, 94.0 MB/s However, when I try to write to the device: $ dd if=/dev/zero of=./test bs=64k 8809+0 records in 8809+0 records out 577306624 bytes (577 MB) copied, 321.861 s, 1.8 MB/s Also, when I read I see CPU usage, when I write, the CPU stays at almost 0% usage. Here is output of cryptsetup luksDump: LUKS header information for /dev/vg0/secure Version: 1 Cipher name: aes Cipher mode: cbc-essiv:sha256 Hash spec: sha1 Payload offset: 2056 MK bits: 256 MK digest: dd 62 b9 a5 bf 6c ec 23 36 22 92 4c 39 f8 d6 5d c1 3a b7 37 MK salt: cc 2e b3 d9 fb e3 86 a1 bb ab eb 9d 65 df b3 dd d9 6b f4 49 de 8f 85 7d 3b 1c 90 83 5d b2 87 e2 MK iterations: 44500 UUID: a7c9af61-d9f0-4d3f-b422-dddf16250c33 Key Slot 0: ENABLED Iterations: 178282 Salt: 60 24 cb be 5c 51 9f b4 85 64 3d f8 07 22 54 d4 1a 5f 4c bc 4b 82 76 48 d8 a2 d2 6a ee 13 d7 5d Key material offset: 8 AF stripes: 4000 Key Slot 1: DISABLED Key Slot 2: DISABLED Key Slot 3: DISABLED Key Slot 4: DISABLED Key Slot 5: DISABLED Key Slot 6: DISABLED Key Slot 7: DISABLED

    Read the article

  • Postfix Postscreen: how to use postscreen for smtp and smtps both

    - by petermolnar
    I'm trying to get postscreen work. I've followed the man page and it's already running correctly for smtp. But it I want to use it for smtps as well (adding the same line as smtp in master.cf but with smtps) i receive failure messages in syslog like: postfix/postscreen[8851]: fatal: btree:/var/lib/postfix/postscreen_cache: unable to get exclusive lock: Resource temporarily unavailable Some say that postscreen can only run once; that's ok. But can I use the same postscreen session for both smtp and smtps? If not, how to enable postscreen for smtps as well? Any help would be apprecieted! The parts of the configs: main.cf postscreen_access_list = permit_mynetworks, cidr:/etc/postfix/postscreen_access.cidr postscreen_dnsbl_threshold = 8 postscreen_dnsbl_sites = dnsbl.ahbl.org*3 dnsbl.njabl.org*3 dnsbl.sorbs.net*3 pbl.spamhaus.org*3 cbl.abuseat.org*3 bl.spamcannibal.org*3 nsbl.inps.de*3 spamrbl.imp.ch*3 postscreen_dnsbl_action = enforce postscreen_greet_action = enforce master.cf (full) smtpd pass - - n - - smtpd smtp inet n - n - 1 postscreen tlsproxy unix - - n - 0 tlsproxy dnsblog unix - - n - 0 dnsblog ### the problematic line ### smtps inet n - - - - smtpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp relay unix - - - - - smtp showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache dovecot unix - n n - - pipe flags=DRhu user=virtuser:virtuser argv=/usr/bin/spamc -e /usr/lib/dovecot/deliver -d ${recipient} -f {sender}

    Read the article

  • Linux Sound Drivers - Recompiling kernel with ehcd-hcd module

    - by jhome
    I just installed Linux Mint and I am trying to get my usb soundcard to work. I am completely new to Linux so I have only been learning about all the important parts of the OS this afternoon. No one I know has compiled kernel so I can't ask anyone. I am following instructions on this site: http://wiki.ubuntuusers.de/Benutzer/BigMc#Final-setup-of-US-122L-US-144 "Recompile your Kernel with ehcd-hcd as a module: Instructions for Ubuntu (german) Change "Device Drivers - USB support - EHCI HCD (USB 2.0) support)" to "M" when configuring. Make sure you also install the kernel headers." I know how to do any of these processes. Someone mentioned a package manager. Is recompiling basically in layman's terms reinstallation? Where do I go to the change device drivers? Cheers Edit: I am attempting to be able to use my Tascam US-144 on Linux Mint. Apparently, to use it properly it has to regress to functionality of a former unit (US-122), so according to the instructions a USB port has to be USB 1.0, rather than USB 2.0. I've tried using that ndis** programme for wireless drivers but with no success.

    Read the article

  • lm-sensors - always returns 32 degrees (celsius) for temperature

    - by mopoke
    On my VIA EPIA motherboard (using VIA VT8231 ISA bridge), I get strange output for the lm-sensors temperature reading. It always returns 32 degrees (celsius). I have previously had correct output for temperature (my munin graphs show temperatures typically in the range of 50 to 60 degrees. I've tried uninstalling (and purging) the lm-sensors package, have re-run sensors-detect a number of times and rebooted but nothing seems to change the output. I am running Ubuntu Karmic Koala (9.10). Anyone got any bright ideas on what I might have missed? uname -a: Linux george 2.6.31-16-386 #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009 i686 GNU/Linux cpuinfo: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 399.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up bogomips : 800.04 clflush size : 32 power management: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +32.0°C (crit = +60.0°C)

    Read the article

  • Dedicated server with a lot of storage and good support - and cost-effective

    - by Martin Burger
    Hello, I am from Germany and looking for a dedicated server located in the US with a lot of storage: 750 - 1500 GB. CPU speed and amount of memory are secondary, the server will host large amounts of media files via http and ftp - the basic task is to help people exchange media files. In Germany, there are some good offers, like "Root Server EQ6" at www.hetzner.de. For example, that company provides support of high quality, and their plans are very cost-effective. The plan mentioned above costs about $90 per month and provides two 1500 GB SATA-II HDDs (Software-RAID 1). In the US, I found (amongst others) Go Daddy and rackspace. Go Daddy offers some "Storage Monster" plans that include 2 x 1,000 GB hard drives for about $180 per month - already twice as much as Hetzner above. However, I found some blog and forum entries that complain about the support provided by Go Daddy. Rackspace seems to provide decent support, but they are very "upscale". Their dedicated servers are customizable and start at $419 - thus, about 4.5 times as much as Hetzner. Can anybody recommend a solution / plan that is comparable to the one by Hetzner? Or are prices for dedicated servers in general much higher than in Germany? Regards, Martin

    Read the article

  • How can I tell if a replacement display is compatible with my laptop?

    - by moraleida
    I have an Acer Aspire 4810TZ from 2010 which I truly love - it's a 3 year old notebook that still carries on for about 5 to 6h straight off the battery. I've also invested in it with an SSD and extra RAM and it's fine for my use right now. I'd really rather not just dump it. Now... its screen is dead and I'm looking for replacement parts, but it turns out to be a kind of expensive display - AUO B140XW02 14" LED. US$ 125 was the cheapest I found here (Rio de Janeiro, Brazil). The official dealer sells them for US$ 175. I'm aware of How do I know if a LCD is compatible with my Laptop? and Can I replace a laptop screen with one of a different resolution? but the answers don't really help me in this case. Also Replacing an LCD screen in a laptop gives me a hint but I'm completely dumb at hardware so this is why i'm asking: Is it possible to buy an LCD or a lower grade LED screen with the same connectors? What characteristics should I look for to find out if a certain display is compatible?

    Read the article

  • repair partition table

    - by m.sr
    Hallo. I've just overwritten my partition table of my system's hard disk. i made a cfdisk on the wrong device (/dev/sda instead of /dev/sdd), deleted all partitions, made one new primary spanning over the whole device, set its type to 07 (NTFS) and hit write. So here i am with my system running. Until i reboot, i hope/guess nothing will change - meaning: all my data is accessible (I'm currently making a dd-backup of the whole device and plan to make a .tar.gz-backup of the most important data later). I also backed up /proc/partitions, /proc/diskstats (even though i guess this is more about throughput and stuff like this ...) and /sys/block/sda/sda?/{start,size}. Some further things i know: 4 primary partitions 1st partition: ~100Mb, ext3, /boot 2nd partition: ~100Mb, "Win7 Boot Partition", ntfs(?) 3rd partition: ~20...30GB, Win7, ntfs 4th partition: ~20...30GB, luks-encrypted device The luks- de crypted device is a LVM-PV The /, /home & swap-partitions are all LVs on the (VG on the) above noted PV So my questions: What is the simplest way to just write the kernels partition table to the disk? What is the simplest way to take the above mentioned (and perhaps other I don't know of ...) data and generate the partition table? Are there any problems to take care of regarding to luks and/or lvm? Is there any data I should backup before rebooting (meanig stuff from kernel [ /sys/..., /proc/...] and so on, which could help me regenerate the partition table)? Thanks a lot! P.S.: debian sid, Kernel 2.6.34-1-amd64 from debian-experimental, 80GB Intel SSD

    Read the article

  • Google-Bot fell in love with my 404-page

    - by 32bitfloat
    Every day my access-log looks kind of this: 66.249.78.140 - - [21/Oct/2013:14:37:00 +0200] "GET /robots.txt HTTP/1.1" 200 112 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.78.140 - - [21/Oct/2013:14:37:01 +0200] "GET /robots.txt HTTP/1.1" 200 112 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.78.140 - - [21/Oct/2013:14:37:01 +0200] "GET /vuqffxiyupdh.html HTTP/1.1" 404 1189 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" or this 66.249.78.140 - - [20/Oct/2013:09:25:29 +0200] "GET /robots.txt HTTP/1.1" 200 112 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.75.62 - - [20/Oct/2013:09:25:30 +0200] "GET /robots.txt HTTP/1.1" 200 112 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" 66.249.78.140 - - [20/Oct/2013:09:25:30 +0200] "GET /zjtrtxnsh.html HTTP/1.1" 404 1186 "-" "Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)" The bot calls the robots.txt twice and after that tries to access a file (zjtrtxnsh.html, vuqffxiyupdh.html, ...) which cannot exist and must return a 404 error. The same procedure every day, just the unexisting html-filename changes. The content of my robots.txt: User-agent: * Disallow: /backend Sitemap: http://mysitesname.de/sitemap.xml The sitemap.xml is readable and valid, so there seems to be no reason why the bot should want to force a 404-error. How should I interpret this behaviour? Does it point to a mistake I've done or should I ignore it?

    Read the article

  • Need help to configure file:default on apache2

    - by turk182
    hi all!! im trying to use xen on ubuntu 8.04 hardy heron, because it is a project that assign to me in my new job, i have already installed xen and im running the virtual machines. according to the guide that they give me, i have to configure de file: default, from apache2 directory, like this: vi /etc/apache2/sites-available/default inside of this file i have to write the next information: NameVirtualHost * VirtualHost * ServerName "www".ejemplo.com ServerAlias ejemplo.com DocumentRoot /var/www/ ProxyRequests Off Proxy * Order deny,allow Allow from all /Proxy ProxyPass /balancer-manager ! ProxyPass / balancer://mycluster/ stickysession=BALANCEID nofailover=On ProxyPassReverse / "http"://http1.ejemplo.com/ ProxyPassReverse / "http"://http2.ejemplo.com/ Proxy balancer://mycluster BalancerMember "http://10.10.2.101:8080 loadfactor=1 BalancerMember "http://10.10.2.102:8080 loadfactor=2 ProxySet lbmethod=byrequests /Proxy Location /balancer-manager SetHandler balancer-manager Order deny,allow Allow from all /Location /VirtualHost in the section of balancermember im using the ip of the virtual machine: virtual machine 1 has ip 10.10.2.101 and virtual machine 2 has ip 10.10.2.102 then i have to install apache2 on each virtual machine and restart apache2 the question is what i hace to do to verify if all of this works allegedly i have to open a browser and write "www.ejemplo.com" and suppost show something thats the reason that im ask for help cause i dont know what to do, im looking for on the web and i cant find nothing related with this... ill appreciatte your help. THXS!!! pd. i closed "www" and "HTTP" in quotes by rules of this sites cause im a new user

    Read the article

  • How do I create a wifi network bridge with qemu on OS X?

    - by a paid nerd
    I grabbed a small FreeBSD live CD and QEMU, and I'm trying to bridge my Mac OS X 10.8 wifi connection so that the guest OS is available on my LAN. However, the guest OS never gets a DHCP lease. This works perfectly with VirtualBox in their "bridged" network mode, so I know it can be done. I need to get it working with QEMU because VirtualBox doesn't support the architecture that I need for this project. Here's what I've done so far based on hours of googling: Installed TUNTAP for OS X Told OS X to supposedly forward all packets, even ARP: (NOTE: This doesn't appear to work.) $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 Created a bridge: $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) Started tcpdump with -I in the hopes that it enables promiscuous mode on the wifi device: $ sudo tcpdump -In -i en0 Run QEMU using the bridged network instructions: $ qemu-system-x86_64 -cdrom mfsbsd-9.2-RELEASE-amd64.iso -m 1024 \ -boot d -net nic -net tap,ifname=tap0,script=no,downscript=no But the guest system never gets a DHCP lease: If I tcpdump -ni tap0, I see lots of traffic from the wireless network. But if I tcpdump -ni en0, I don't see any DHCP traffic from the QEMU guest OS. Any ideas? Update 1: I tried sudo defaults write "/Library/Preferences/SystemConfiguration/com.apple.Boot" "Kernel Flags" "net.inet.ip.scopedroute=0" and rebooting per this mailing list suggestion, but this didn't help. In fact, it made VirtualBox bridged mode stop working.

    Read the article

  • Filezilla client unable to get directory listing from Filezilla Server (Windows)

    - by sestocker
    I've set up a self signed certificate in FileZilla server and enabled FTP over SSL/TPS. When I connect from the client FileZilla, I am able to authenticate but cannot get a directory listing: Status: Connecting to MY_SERVER_IP:21... Status: Connection established, waiting for welcome message... Response: 220-FileZilla Server version 0.9.39 beta Response: 220-written by Tim Kosse ([email protected]) Response: 220 Please visit http://sourceforge.net/projects/filezilla/ Command: AUTH TLS Response: 234 Using authentication type TLS Status: Initializing TLS... Status: Verifying certificate... Command: USER MYUSER Status: TLS/SSL connection established. Response: 331 Password required for MYUSER Command: PASS ******** Response: 230 Logged on Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Protection level set to P Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PORT 10,10,25,85,219,172 Response: 200 Port command successful Command: MLSD Response: 150 Opening data channel for directory list. Response: 425 Can't open data connection. Error: Failed to retrieve directory listing I have ports 21 and 50001 through 50005 open on the firewall. We are migrating servers - the 50001 - 50005 is one of the things that helped get FTPS working on the old server. I'm not sure this installation would use the same ports? What else could be the problem?

    Read the article

  • CentOS 6.0 yum audacity dependency

    - by Kaemic
    I'm trying to install audacity on centos using yum and I cant force yum to resolve all dependencies, here's what i got, can someone help me with it (when I download the rpm file and click-installit i get the dependency problem too): # yum --disablerepo=c6-media install audacity-1.2.3-2.2.el4.rf.i386.rpm Loaded plugins: fastestmirror, refresh-packagekit Loading mirror speeds from cached hostfile * base: mirror.karneval.cz * centosplus: mirror.karneval.cz * extras: centos.vieth-server.de * rpmforge: fr2.rpmfind.net * updates: mirror.karneval.cz Setting up Install Process Examining audacity-1.2.3-2.2.el4.rf.i386.rpm: audacity-1.2.3-2.2.el4.rf.i386 Marking audacity-1.2.3-2.2.el4.rf.i386.rpm to be installed Resolving Dependencies --> Running transaction check ---> Package audacity.i386 0:1.2.3-2.2.el4.rf set to be updated --> Processing Dependency: wxGTK >= 2.4.0 for package: audacity-1.2.3-2.2.el4.rf.i386 --> Processing Dependency: libwx_gtk-2.4.so.0 for package: audacity-1.2.3-2.2.el4.rf.i386 --> Processing Dependency: libwx_gtk-2.4.so.0(WXGTK_2.4) for package: audacity-1.2.3-2.2.el4.rf.i386 --> Running transaction check ---> Package audacity.i386 0:1.2.3-2.2.el4.rf set to be updated --> Processing Dependency: libwx_gtk-2.4.so.0 for package: audacity-1.2.3-2.2.el4.rf.i386 --> Processing Dependency: libwx_gtk-2.4.so.0(WXGTK_2.4) for package: audacity-1.2.3-2.2.el4.rf.i386 ---> Package wxGTK.i686 0:2.8.12-1.el6.rf set to be updated --> Finished Dependency Resolution Error: Package: audacity-1.2.3-2.2.el4.rf.i386 (/audacity-1.2.3-2.2.el4.rf.i386) Requires: libwx_gtk-2.4.so.0 Error: Package: audacity-1.2.3-2.2.el4.rf.i386 (/audacity-1.2.3-2.2.el4.rf.i386) Requires: libwx_gtk-2.4.so.0(WXGTK_2.4) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest

    Read the article

  • Windows Explorer slow to open networked computer, fast to navigate once opened

    - by Scott Noyes
    I open Windows Explorer and enter an IP for a computer on my home network (\\192.168.1.101). It takes 30 seconds or more to present a list of the shared folders. It does not appear to be an initial handshaking/authentication thing; even if I allow the view to load and then immediately load the same again, it is always slow. Once they appear, navigating through folders and opening files is fast. Also, navigating directly to a folder (\\192.168.1.101\My Music) is fast, even if it's the first connection since a restart. Using \\computerName instead of the IP address gives exactly the same results. Pings return in 1ms. net view \\computerName (or \ipAddress) returns the list of shared folders fast. This makes me suspect an Explorer issue rather than a network issue. Suspecting that the remote computer was being automatically indexed or something, I went into Tools-Folder Options-View and unchecked "Automatically search for network folders and printers," but that made no difference. De-selecting the "Folders" icon near the address bar makes no difference. Adding the IP address and computer name to the hosts file makes no difference. Both computers involved are laptops running Windows XP. Both have WiFi and cable adapters. Mine is not connected via cable. The result is the same whether the target is plugged in to the cable or not (although the IP address changes - 192.168.1.101 over cable, 192.168.1.103 over WiFi.) We are using DHCP assigned by the router.

    Read the article

  • Directory directive: AuthType None but still need an AuthProvider?

    - by Steffen Winkler
    For now I just need the server to let me download files from one specific folder (in my case I chose /opt/myFolder for that task) Distribution is Debian 6.0 *edit_start* Apache version is 2.4, according to their official documentation, the Order/Allow clauses are deprecated and should not be used anymore I'm an idiot: Apache version is 2.2. *edit_end* My directory directives in apache2.conf look like this: <IfModule dir_module> DirectoryIndex index.html index.htm index.php </IfModule> ServerRoot "/etc/apache2" DocumentRoot "/opt/myFolder" <Directory /> Options FollowSymLinks AuthType None AllowOverride None Require all denie </Directory> <Directory "/opt/myFolder/*"> Options FollowSymLinks MultiViews AllowOverride None AuthType None Require all allow </Directory> When I try to access a file inside that folder (http://myserver.de/aTestFile.zip) I get an Internal Server Error. Also Apache writes the following error into it's log: configuration error: couldn't check user. Check your authn provider!: /aTestFile.zip Why would I need an authn provider if I don't want any authentication? Also I hope someone can explain to me what kind of AuthenticationProvider I'd need for that. Everytime I search for those things I get pointed at people asking how to protect files/directories with passwords or restrict access to some IP addresses, which doesn't really help me. ok, since I've Apache version 2.2, here is the error I get when using the Order/Deny/Allow commands instead of AuthType/Require: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration.

    Read the article

  • X.org - mouse gets stuck on press

    - by grawity
    I'm using Arch Linux. Very often, when I click on something, the OS thing sees the mouse press but not the release. If it was a link or file I clicked, moving the cursor would drag it too. Hammering the same mouse button again gives no effect. Usually, if I tap the touchpad (ALPS), the system finally sees both press and release of that, and I can continue working. (This might be because it uses a different driver - synaptics instead of evdev.) As you can imagine, this is quite annoying even for someone who spends 70% of his life in front of a terminal app. This is not a mouse issue - I'm on a laptop, and this affects both the Trackpoint thing and an external USB mouse. This is not a DE or window manager issue - I have used GNOME (with Metacity, Compiz and Xfwm4), Xfce (with Metacity and Xfwm4), mwm, twm, awesome, and wmii. Doesn't seem to be a hardware thing - after rebooting into Windows XP, everything works fine. hal is used for the auto-configuration of devices (as I have to disconnect the USB mouse often), so Xorg.conf really has nothing of relevance. Xorg -version shows: X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 If it changes anything, the laptop is stone-age Dell Latitude C840. I kinda suspect either hal or the evdev thing to cause it, but I really have no ideas on what to check further. In other words, HALP!#$ This thing is driving me nuts.

    Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >