Search Results

Search found 8185 results on 328 pages for 'technical tests'.

Page 271/328 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

• Using open2300 with Ubuntu

  - by Gawain

  Hello, I am currently running Ubuntu 8.10 and have been trying to use Open2300 to read data from a Lacrosse WS-2310 weather station and report it to the WUnderground server. The program compiles fine but when I try to run it, it does one of two things: usually it pauses for about 4 minutes, then prints "could not reset" to the screen. But sometimes it just hangs forever. It seems like my computer is unable to communicate with the weather station. I have set the serial port as /dev/ttyS0 in the open2300.conf file and i have also tried /dev/ttyS1, /dev/ttyS2, etc with the same result. As far as I can tell, there are no other settings regarding how Open2300 communicates with the device. Is my serial port locked somehow? It could be something as simple as an incorrect configuration for my serial port or something, but I would have no idea how to check that or change the configuration. Any help would be greatly appreciated. thanks, Gawain EDIT: I tried some tests that i found online and everything seems to be working with my serial port... gawain@gawain:~$ ls -l /dev/ttyS* crw-rw---- 1 root dialout 4, 64 2009-07-09 10:01 /dev/ttyS0 crw-rw---- 1 root dialout 4, 65 2009-07-09 08:56 /dev/ttyS1 crw-rw---- 1 root dialout 4, 66 2009-07-09 08:56 /dev/ttyS2 crw-rw---- 1 root dialout 4, 67 2009-07-09 08:56 /dev/ttyS3 gawain@gawain:~$ setserial -a /dev/ttyS0 /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test gawain@gawain:~$ setserial -g /dev/ttyS* /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: 8250, Port: 0xd028, IRQ: 18 /dev/ttyS2, UART: 8250, Port: 0xd040, IRQ: 18 /dev/ttyS3, UART: 8250, Port: 0xd050, IRQ: 18 gawain@gawain:~$ echo 12345 > /dev/ttyS0 gawain@gawain:~$ dmesg | tail -3 [ 144.424259] ppdev0: unregistered pardevice [ 145.692199] ppdev0: registered pardevice [ 145.740052] ppdev0: unregistered pardevice I also tried changing the serial port name to /dev/ttys0 (with a lowercase S) and in that case it gave me a different error, "Unable to open serial device." This suggests to me that it is able to open /dev/ttyS0 but something else is preventing it from reading the weather station. Any ideas? thanks.

  Read the article

• UIWebViewDelegate returns different error message on iPod Touch 2G and 3G

  - by lostInTransit

  Hi I have an app developed using SDK 3.0. My view has a UIWebView whose delegate is the viewcontroller. I want to show an error message when the webview does not load (in case the touch goes out of wifi range or wifi is turned off) I override this method to show an alert - (void)webView:(UIWebView *)wbView didFailLoadWithError:(NSError *)error But this caused an issue when some links were clicked on the webview. The page loaded but if some images from the previous page were not loaded, the method call was triggered. Testing on an iPod Touch 3G, the NSError's userInfo has the localized description as no Internet connection if load fails due to no internet connection. But this only seems to be true for an iPod Touch 3G. 2G shows a different message (I got to know from some beta testers. They aren't very technical so can't tell them to get me the logs or anything.) Can anyone with an iPod Touch 2G tell me the values for the NSError userInfo? Or better still, did anyone else face this issue? How did you resolve it? Thanks.

  Read the article

• Basic jUnit Questions

  - by Epitaph

  I was testing a String multiplier class with a multiply() method that takes 2 numbers as inputs (as String) and returns the result number (as String) `public String multiply(String num1, String num2); I have done the implementation and created a test class with the following test cases involving the input String parameter as 1) valid numbers 2) characters 3) special symbol 4) empty string 5) Null value 6) 0 7) Negative number 8) float 9) Boundary values 10) Numbers that are valid but their product is out of range 11) numbers will + sign (+23) 1) I'd like to know if "each and every" assertEquals() should be in it's own test method? Or, can I group similar test cases like testInvalidArguments() to contains all asserts involving invalid characters since ALL of them throw the same NumberFormatException ? 2) If testing an input value like character ("a"), do I need to include test cases for ALL scenarios? "a" as the first argument "a" as the second argument "a" and "b" as the 2 arguments 3) As per my understanding, the benefit of these unit tests is to find out the cases where the input from a user might fail and result in an exception. And, then we can give the user with a meaningful message (asking them to provide valid input) instead of an exception. Is that the correct? And, is it the only benefit? 4) Are the 11 test cases mentioned above sufficient? Did I miss something? Did I overdo? When is enough? 5) Following from the above point, have I successfully tested the multiply() method?

  Read the article

• Programmer Puzzle: Encoding a chess board state throughout a game

  - by Andrew Rollings

  Not strictly a question, more of a puzzle... Over the years, I've been involved in a few technical interviews of new employees. Other than asking the standard "do you know X technology" questions, I've also tried to get a feel for how they approach problems. Typically, I'd send them the question by email the day before the interview, and expect them to come up with a solution by the following day. Often the results would be quite interesting - wrong, but interesting - and the person would still get my recommendation if they could explain why they took a particular approach. So I thought I'd throw one of my questions out there for the Stack Overflow audience. Question: What is the most space-efficient way you can think of to encode the state of a chess game (or subset thereof)? That is, given a chess board with the pieces arranged legally, encode both this initial state and all subsequent legal moves taken by the players in the game. No code required for the answer, just a description of the algorithm you would use. EDIT: As one of the posters has pointed out, I didn't consider the time interval between moves. Feel free to account for that too as an optional extra :) EDIT2: Just for additional clarification... Remember, the encoder/decoder is rule-aware. The only things that really need to be stored are the player's choices - anything else can be assumed to be known by the encoder/decoder. EDIT3: It's going to be difficult to pick a winner here :) Lots of great answers!

  Read the article

• rails test.log is always empty

  - by Raiden

  All the log entries generated when running tests with 'rake' are written to my development.log instead of test.log file Do I have to explicitly enable logging for test in enviornments/test.config?? (I'm using 'turn' gem to format test output, Can that cause an issue?) I'm running rails 2.3.5, ruby 1.8.7 I've all these gems installed for RAILS_ENV=test. Any help is appreciated. -[I] less -[I] treetop = 1.4.2 - [I] polyglot = 0.2.5 - [I] mutter = 0.4.2 - [I] mysql - [I] authlogic - [R] activesupport - [I] turn - [I] ansi = 1.1.0 - [I] facets = 2.8.0 - [I] rspec = 1.2.0 - [I] rspec-rails = 1.2.0 - [I] rspec = 1.3.0 - [R] rack = 1.0.0 - [I] webrat = 0.4.3 - [I] nokogiri = 1.2.0 - [R] rack = 1.0 - [I] rack-test = 0.5.3 - [R] rack = 1.0 - [I] cucumber = 0.2.2 - [I] term-ansicolor = 1.0.4 - [I] treetop = 1.4.2 - [I] polyglot = 0.2.5 - [I] polyglot = 0.2.9 - [R] builder = 2.1.2 - [I] diff-lcs = 1.1.2 - [R] json_pure = 1.2.0 - [I] cucumber-rails - [I] cucumber = 0.6.2 - [I] term-ansicolor = 1.0.4 - [I] treetop = 1.4.2 - [I] polyglot = 0.2.5 - [I] polyglot = 0.2.9 - [R] builder = 2.1.2 - [I] diff-lcs = 1.1.2 - [R] json_pure = 1.2.0 - [I] database_cleaner = 0.2.3 - [I] launchy - [R] rake = 0.8.1 - [I] configuration = 0.0.5 - [I] faker - [I] populator - [R] flog = 2.1.0 - [R] flay - [I] rcov - [I] reek - [R] ruby_parser ~ 2.0 - [I] ruby2ruby ~ 1.2 - [R] sexp_processor ~ 3.0 - [R] ruby_parser ~ 2.0 - [R] sexp_processor ~ 3.0 - [I] roodi - [R] ruby_parser - [I] gruff - [I] rmagick - [I] ruby-prof - [R] jscruggs-metric_fu = 1.1.5 - [I] factory_girl - [I] notahat-machinist

  Read the article

• Python doctest error

  - by user74283

  Hi I recently started experimenting with python currently reading "Think like a computer scientist: Learning python v2nd edition" I have been having some trouble with doctest. I use a windows 7 machine and Eclipse IDE with pydev. My question is when i run the script below i get the error below. Said script is below the the error message Traceback (most recent call last): File "C:\Users\shaytac\PythonProjects\test.py", line 21, in doctest.testmod() File "C:\Python26\lib\doctest.py", line 1829, in testmod for test in finder.find(m, name, globs=globs, extraglobs=extraglobs): File "C:\Python26\lib\doctest.py", line 852, in find self._find(tests, obj, name, module, source_lines, globs, {}) File "C:\Python26\lib\doctest.py", line 906, in _find globs, seen) File "C:\Python26\lib\doctest.py", line 894, in _find test = self._get_test(obj, name, module, globs, source_lines) File "C:\Python26\lib\doctest.py", line 978, in _get_test filename, lineno) File "C:\Python26\lib\doctest.py", line 597, in get_doctest return DocTest(self.get_examples(string, name), globs, File "C:\Python26\lib\doctest.py", line 611, in get_examples return [x for x in self.parse(string, name) File "C:\Python26\lib\doctest.py", line 573, in parse self._parse_example(m, name, lineno) File "C:\Python26\lib\doctest.py", line 631, in _parse_example self._check_prompt_blank(source_lines, indent, name, lineno) File "C:\Python26\lib\doctest.py", line 718, in _check_prompt_blank line[indent:indent+3], line)) ValueError: line 2 of the docstring for main.compare lacks blank after : 'compare(5, 4) ' def compare(a, b): """ >>>compare(5, 4) 1 >>>compare(7, 7) 0 >>>compare(2, 3) -1 >>>compare(42, 1) 1 """ if a > b : return 1 if a == b : return 0 if a < b : return -1 if __name__ == '__main__': import doctest doctest.testmod()

  Read the article

• Best way to "un-promote" files in Accurev?

  - by Luke Rinard

  My company uses Accurev for source control, and for all its benefits, there's one simple action that I just can't figure out how to accomplish. Often we have someone accidentally push a file up too far in our stream structure -- from the "Development" stream to the "Release" stream, for example. What is the best way to "un-promote" this file? That is to say, to get the old version of the file back into the "Release" stream, and keep the new version of the file in the "Development" stream, where it belongs? Just doing a "Revert to Backed" or other Revert action on the file in the Release stream will either cause an old version of the file to propagate down into Development, or will make the file disappear entirely. In the above case, the developer will have to jump through hoops with setting basis times on streams, or use the command line tool to do a checkout of an old transaction, to get the file back. Sometimes the people in question are non-technical, so this is not a good solution. I have also considered moving the files to a "higher ground" stream, reverting, and then cross-promoting them to the lower stream again. This seems really kludgy. It seems like Accurev is obscure enough that Google is no help, so I turn to the good folks of StackOverflow for help -- has anybody figured out the "Accurevy" way to accomplish this?

  Read the article

• Testing a method that sends e-mail without sending the mail

  - by SnOrfus

  I have a method like public abstract class Base { public void MethodUnderTest(); } public class ClassUnderTest : Base { public override MethodUnderTest() { if(condition) { IMail mail = new Mail() { /* ... */ }; IMailer mailer = new Mailer() { /* ... */ } mailer.Send(mail); } else { /* ... */ } } } I have unit tests for this method, and the mail gets sent to myself, so it's not terrible (better than no test) but I'd prefer not to send the mail. The problem I have is that I don't want test specific code in the class (ie. if (testMode) return; instead of sending the mail) I don't know lots about DI, but I considered passing a mock IMailer into MethodUnderTest except that it overrides the base class, and no other class that derives from Base needs an IMailer object (I don't want to force implementers of Base to take an unnecessary IMailer in MethodUnderTest) What else can I do? (note: IMail and IMailer are part of an external library for sending e-mail. It's written in house, so I can modify it all I like if necessary, though I can't see a need to in this situation)

  Read the article

• python protobufs - avoid the install step ?

  - by orion elenzil

  i'm writing a small python utility which will be consumed by moderately non-technical users and which needs to interface w/ some protobufs. ideally, i would like the only prerequisites to using this on a local machine to be: have python installed * have an SVN checkout of the repository * run a simple bash script to build the local proto .py definitions * run "python myutility" i'm running into trouble around importing descriptor_pb2.py, tho. i've seen Why do I see "cannot import name descriptor_pb2" error when using Google Protocol Buffers? , but would like to avoid adding the additional prerequisite of having run the proto SDK installer. i've modified the bash script to also generate descriptor_pb2.py in the local heirarchy, which works for the first level of imports from my other _pb2.py files, but it looks like descriptor_pb2.py itself tries to import descriptor_pb2 can't find it: $ python myutility.py Traceback (most recent call last): File "myutility.py", line 4, in <module> import protos.myProto_pb2 File "/myPath/protos/myProto_pb2.py", line 8, in <module> from google.protobuf import descriptor_pb2 File "/myPath/google/protobuf/descriptor_pb2.py", line 8, in <module> from google.protobuf import descriptor_pb2 ImportError: cannot import name descriptor_pb2 my local folder looks like: * myutility.py * google/ * protobuf/ * descriptor.py * descriptor_pb2.py * protos * myProto_ob2.py also, i'm a python n00b, so it's possible i'm overlooking something obvious. tia, orion

  Read the article

• shoulda macros with rspec2 beta 5 and rails3 beta2

  - by Millisami

  I've setup Rspec2 beta5 and shoulda as following to use shoulda macros inside rspec model tests. Gemfile group :test do gem "rspec", ">= 2.0.0.beta.4" gem "rspec-rails", ">= 2.0.0.beta.4" gem 'shoulda', :git => 'git://github.com/bmaddy/ shoulda.git' gem "faker" gem "machinist" gem "pickle", :git => 'git://github.com/codegram/ pickle.git' gem 'capybara', :git => 'git://github.com/jnicklas/ capybara.git' gem 'database_cleaner', :git => 'git://github.com/bmabey/ database_cleaner.git' gem 'cucumber-rails', :git => 'git://github.com/aslakhellesoy/ cucumber-rails.git' end *spec_helper.rb* Dir["#{File.dirname(__FILE__)}/support/**/*.rb"].each {|f| require f} require 'shoulda' Rspec.configure do |config| *spec/models/outlet_spec.rb* require 'spec_helper' describe Outlet do it { should validate_presence_of(:name) } end And when I run the spec, I get the following error. [~/rails_apps/rails3_apps/automation (master)?] ? spec spec/models/ outlet_spec.rb DEPRECATION WARNING: RAILS_ROOT is deprecated! Use Rails.root instead. (called from join at /home/millisami/.rvm/gems/ruby-1.9.1-p378%rails3/ bundler/gems/shoulda-87e75311f83548760114cd4188afa4f83fecdc22-master/ lib/shoulda/autoload_macros.rb:40) F 1) Outlet Failure/Error: it { should validate_presence_of(:name) } undefined method `validate_presence_of' for #<Rspec::Core::ExampleGroup::Nested_1:0xc4dc138 @__memoized={}> # ./spec/models/outlet_spec.rb:4:in `block (2 levels) in <top (required)>' Finished in 0.0399 seconds 1 example, 1 failures [~/rails_apps/rails3_apps/automation (master)?] ? Why the "undefined method" ?? Is the shoulda getting loaded?

  Read the article

• Workflow engine BPMN, Drools, etc or ESB?

  - by Tom

  We currently have an application that is based on an in-house developed workflow engine with YAML based DSL. We are looking to move parts of it to Java. I have discovered a number of java solutions like Intalio, JBPM, Drools Expert, Drools Flow etc. They appear to be aimed at businesses where the business analyst creates the workflows using a graphical editor and submits them to the workflow engine. They seem geared towards ease of use for non-technical people rather than for developers with a focus on human interaction. The workflows tend to look like. Discover-a-file -\ -> join -> process-file -> move-file -> register-file Discover-some-metadata -/ If any step fails we need to retry it X times. We also need to be able to stop the system and be able to restart it and have it continue from where it was (durable). Some of our workflows can be defined by a set of goals we need to achieve so Jess's backwards rule chaining sounds interesting but it is not open source. It might be that what we are after is a Finite State Machine engine or just an Enterprise Service Bus and do everything as JMS queues. Is there a good open source workflow engine that is both standards-based but also geared towards developers. We don't particular want to use a graphical workflow designer or write reams of XML and it should ideally be in Java or language agnostic (makes REST/Soap calls to external services). Thanks, Tom

  Read the article

• How to organize the work when project needs to be re-implemented due to poor code quality?

  - by Dmitriy Nagirnyak

  Hi, I have joined a very small where one main developer has been buiding the web app (.NET 4.0) during ~6 months. The project should be delivered within next 2 months. After first look at the code I can say that I would never allow it to go to production (things like catch { }, not tests at all with WebForms etc). So the code quality is incredibly low. My task is to improve that and still deliver the solution. So I plan to start with unit testing and MVC2 reimplementing most of the functionality (though using some of the existing code). I estimate that I will need about 6 weeks to catch up with the current progress and be on te same functionality level as the application will be in 6 months. The problem is that the main developer who has been working on the project does not seem to be very 'professional' and skillful (he seems to be really starting in IT and many basic things are unknown to him). It will take significant amount of time and effort to educate him how to do the proper testing, development and apply some patterns. I am ready to take responsibility for the reimplemnting the application but at the same time I don't want the main developer to be on idle but as he won't be able to significantly contribute to the better-world project at this stage I am not sure what would the best way to keep productivity high for both of us. Currently I think following solution is good enough: He proceeds doing what he does until I will catch up with him and then start working on a new project together. The problem is that of course this approach is not very productive as one developer will do better-world project while the other will proceed with what he did, effectively doing similar tasks. Can you suggest how we could better organise the work together in order to be most efficient for the overall project? Thanks, Dmitriy.

  Read the article

• Haskell Linear Algebra Matrix Library for Arbitrary Element Types

  - by Johannes Weiß

  I'm looking for a Haskell linear algebra library that has the following features: Matrix multiplication Matrix addition Matrix transposition Rank calculation Matrix inversion is a plus and has the following properties: arbitrary element (scalar) types (in particular element types that are not Storable instances). My elements are an instance of Num, additionally the multiplicative inverse can be calculated. The elements mathematically form a finite field (??2256). That should be enough to implement the features mentioned above. arbitrary matrix sizes (I'll probably need something like 100x100, but the matrix sizes will depend on the user's input so it should not be limited by anything else but the memory or the computational power available) as fast as possible, but I'm aware that a library for arbitrary elements will probably not perform like a C/Fortran library that does the work (interfaced via FFI) because of the indirection of arbitrary (non Int, Double or similar) types. At least one pointer gets dereferenced when an element is touched (written in Haskell, this is not a real requirement for me, but since my elements are no Storable instances the library has to be written in Haskell) I already tried very hard and evaluated everything that looked promising (most of the libraries on Hackage directly state that they wont work for me). In particular I wrote test code using: hmatrix, assumes Storable elements Vec, but the documentation states: Low Dimension : Although the dimensionality is limited only by what GHC will handle, the library is meant for 2,3 and 4 dimensions. For general linear algebra, check out the excellent hmatrix library and blas bindings I looked into the code and the documentation of many more libraries but nothing seems to suit my needs :-(. Update Since there seems to be nothing, I started a project on GitHub which aims to develop such a library. The current state is very minimalistic, not optimized for speed at all and only the most basic functions have tests and therefore should work. But should you be interested in using or helping out developing it: Contact me (you'll find my mail address on my web site) or send pull requests.

  Read the article

• Generating equals / hashcode / toString using annotation

  - by Bruno Bieth

  I believe I read somewhere people generating equals / hashcode / toString methods during compile time (using APT) by identifying which fields should be part of the hash / equality test. I couldn't find anything like that on the web (I might have dreamed it ?) ... That could be done like that : public class Person { @Id @GeneratedValue private Integer id; @Identity private String firstName, lastName; @Identity private Date dateOfBirth; //... } For an entity (so we want to exlude some fields, like the id). Or like a scala case class i.e a value object : @ValueObject public class Color { private int red, green, blue; } Not only the file becomes more readable and easier to write, but it also helps ensuring that all the attributes are part of the equals / hashcode (in case you add another attribute later on, without updating the methods accordingly). I heard APT isn't very well supported in IDE but I wouldn't see that as a major issue. After all, tests are mainly run by continuous integration servers. Any idea if this has been done already and if not why ? Thanks

  Read the article

• EJB3Unit testing no-tx-datasource

  - by justastefan

  Hello, I am doing tests on an ejb3-project using ejb3unit http://ejb3unit.sourceforge.net/Session-Bean.html for testing. All my Services long for @PersistenceContext (UnitName=bla). I set up the ejb3unit.properties like this: ejb3unit_jndi.1.isSessionBean=true ejb3unit_jndi.1.jndiName=ejb/MyServiceBean ejb3unit_jndi.1.className=com.company.project.MyServiceBean everything works with the in-memory-database. So now i want additionally test another servicebean with @PersistenceContext (UnitName=noTxDatasource) that goes for a defined in my datasources.xml: <datasources> <local-tx-datasource> ... </local-tx-datasource> <no-tx-datasource> <jndi-name>noTxDatasource</jndi-name> <connection-url>...</connection-url> <driver-class>oracle.jdbc.OracleDriver</driver-class> <user-name>bla</user-name> <password>bla</password> </no-tx-datasource> </datasources> How do I tell ejb3unit to make this work: Object object = InitialContext.doLookup("java:/noTxDatasource"); if (object instanceof DataSource) { return ((DataSource) object).getConnection(); } else { return null; } Currently it fails saying: javax.NamingException: Cannot find the name (noTxDataSource) in the JNDI tree Current bindings: (ejb/MyServiceBean=com.company.project.MyServiceBean) How can I add this no-tx-datasource to the jndi bindings?

  Read the article

• How to disable Safari Reader in a web page

  - by michael

  I'm curious to know more about what triggers the Reader option in Safari and what does not. I wouldn't plan to implement anything that would disable it, but curious as a technical exercise. Here is what I've learned so far with some basic playing around: You need at least one H tag It does not go by character count alone but by the number of P tags and length Probably looks for sentence breaks '.' and other criteria Safari will provide the 'Reader' if, with a H tag, and the following: 1 P tag, 2417 chars 4 P tags, 1527 chars 5 P tags, 1150 chars 6 P tags, 862 chars If you subtract 1 character from any of the above, the 'Reader' option is not available. I should note that the character count of the H tag plays a part but sadly did not realize this when I determined the results above. Assume 20+ characters for H tag and fixed throughout the results above. Some other interesting things: Setting <p style="display:none;"> for P tags removes them from the count Setting display to none, and then showing them 230ms later with Javascript avoided the Reader option too I'd be interested if anyone can determine this in full.

  Read the article

• vsts load test datasource issues

  - by ashish.s

  Hello, I have a simple test using vsts load test that is using datasource. The connection string for the source is as follows <connectionStrings> <add name="MyExcelConn" connectionString="Driver={Microsoft Excel Driver (*.xls)};Dsn=Excel Files;dbq=loginusers.xls;defaultdir=.;driverid=790;maxbuffersize=4096;pagetimeout=20;ReadOnly=False" providerName="System.Data.Odbc" /> </connectionStrings> the datasource configuration is as follows and i am getting following error estError TestError 1,000 The unit test adapter failed to connect to the data source or to read the data. For more information on troubleshooting this error, see "Troubleshooting Data-Driven Unit Tests" (http://go.microsoft.com/fwlink/?LinkId=62412) in the MSDN Library. Error details: ERROR [42000] [Microsoft][ODBC Excel Driver] Cannot update. Database or object is read-only. ERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed ERROR [42000] [Microsoft][ODBC Excel Driver] Cannot update. Database or object is read-only. I wrote a test, just to check if i could create an odbc connection would work and that works the test is as follows [TestMethod] public void TestExcelFile() { string connString = ConfigurationManager.ConnectionStrings["MyExcelConn"].ConnectionString; using (OdbcConnection con = new OdbcConnection(connString)) { con.Open(); System.Data.Odbc.OdbcCommand objCmd = new OdbcCommand("SELECT * FROM [loginusers$]"); objCmd.Connection = con; OdbcDataAdapter adapter = new OdbcDataAdapter(objCmd); DataSet ds = new DataSet(); adapter.Fill(ds); Assert.IsTrue(ds.Tables[0].Rows.Count > 1); } } any ideas ?

  Read the article

• Selenium RC throws sessionsid should not be null exception, phpunit 3.4 bug only?

  - by user342775

  I am looking to migrate my selenium RC tests to using PHPUnit 3.4.12 from PHPUnit 3.3.2 The selenium test will fail with an exception of the following when I use assertTextPresent() PHPUnit_Framework_Exception: Response from Selenium RC server for getLocation(). ERROR Server Exception: sessionId should not be null; has this session been started yet?. For example: public function testSending($browser) { ... $browser->click("send"); $browser->waitForPageToLoad("30000"); $browser->assertTextPresent("text"); } Below is the selenium RC log (running on Windows): 15:40:19.676 INFO - Command request: isTextPresent[text, ] on session 153d03a123c42098711994f43c2db34 15:40:19.691 INFO - Got result: OK,false on session 153d023a123c42098711994f43cdb34 15:40:19.879 INFO - Command request: testComplete[, ] on session 153d023a123c4298711994f43c2db34 15:40:19.879 INFO - Killing Firefox... 15:40:20.269 INFO - Got result: OK on session 153d023a123c42098711994f43c2db34 15:40:20.472 INFO - Command request: getLocation[, ] on session null 15:40:20.472 ERROR - Exception running 'getLocation 'command on session null java.lang.NullPointerException: sessionId should not be null; has this session been started yet? As you can see, the test should have completed as indicated by the "Killing Firefox" bit, but it instead continued to do something else and triggered the getLocation[, ] command which caused the exception. I have tried the same test with PHPUnit 3.3.2 which did not produce this problem - the test would happily end without the getLocation(). Any ideas? thanks

  Read the article

• Can I use Data URLs in Android 2.1's Webkit-based browser?

  - by Sven Haiges

  Hi all, I am writing a tutorial about the HTML5 Canvas for mobile and did some basic tests. While I can call the getDataURL() Method on an iPhone's HTML5 Canvas Element, it does not seem to return the data URL on Android 2.1 (Google Nexus One) and it's webkit-based default browser. Here is the sample: var dataURL = canvas.toDataURL(); var img = document.createElement('img'); img.setAttribute('src', dataURL); document.getElementById('box').appendChild(img); This will work on iPhone, it will add a new image element with the same content as the canvas. It does nothing or fails on Android 2.1. Has anyone ever gotten this to work? I am also wondering if anyone could help me with understanding the WebKit Build numbers and what it means with regards to what features I can expect. For the iphone, I see a build number of 528.18, on Android 2.1's Browser I see (from the user agent strign) a WebKit build 530.17. So it looks Android 2.1's webkit browser is more up to date, still some features work on iPhone's webkit but not on Android. Does this comparison just make no sense? Thanx all!

  Read the article

• When can a == b be false and a.Equals(b) true?

  - by alastairs

  I ran into this situation today. I have an object which I'm testing for equality; the Create() method returns a subclass implementation of MyObject. MyObject a = MyObject.Create(); MyObject b = MyObject.Create(); a == b; // is false a.Equals(b); // is true Note I have also over-ridden Equals() in the subclass implementation, which does a very basic check to see whether or not the passed-in object is null and is of the subclass's type. If both those conditions are met, the objects are deemed to be equal. The other slightly odd thing is that my unit test suite does some tests similar to Assert.AreEqual(MyObject.Create(), MyObject.Create()); // Green bar and the expected result is observed. Therefore I guess that NUnit uses a.Equals(b) under the covers, rather than a == b as I had assumed. Side note: I program in a mixture of .NET and Java, so I might be mixing up my expectations/assumptions here. I thought, however, that a == b worked more consistently in .NET than it did in Java where you often have to use equals() to test equality.

  Read the article

• In Seam what's the difference between injected EntityManager and getEntityManager from EntityHome

  - by Navi

  I am testing a Seam application using the needle test API. In my code I am using the getEntityManager() method from EntityHome. When I run the unit tests against an in memory database I get the following exception: java.lang.IllegalStateException: No application context active at org.jboss.seam.Component.forName(Component.java:1945) at org.jboss.seam.Component.getInstance(Component.java:2005) at org.jboss.seam.Component.getInstance(Component.java:1983) at org.jboss.seam.Component.getInstance(Component.java:1977) at org.jboss.seam.Component.getInstance(Component.java:1972) at org.jboss.seam.framework.Controller.getComponentInstance(Controller.java:272) at org.jboss.seam.framework.PersistenceController.getPersistenceContext(PersistenceController.java:20) at org.jboss.seam.framework.EntityHome.getEntityManager(EntityHome.java:177) etc .. I can resolve some of these errors by injecting the EntityManager with @In EntityManager entityManager; Unfortunately the persist method of EntityHome also calls the getEntityManager. This means a lot of mocks or rewriting the code somehow. Is there any workaround and why is this exception thrown anyway? I am using Seam 2.2.0 GA by the way. There is nothing special about the components. They are generated by seam-gen. The test is performed with in memory database - I followed the examples in http://jbosscc-needle.sourceforge.net/jbosscc-needle/1.0/db-util.html.

  Read the article

• change custom mapping - sharp architecture/ fluent nhibernate

  - by csetzkorn

  I am using the sharp architecture which also deploys FNH. The db schema sql code is generated during the testing like this: [TestFixture] [Category("DB Tests")] public class MappingIntegrationTests { [SetUp] public virtual void SetUp() { string[] mappingAssemblies = RepositoryTestsHelper.GetMappingAssemblies(); configuration = NHibernateSession.Init( new SimpleSessionStorage(), mappingAssemblies, new AutoPersistenceModelGenerator().Generate(), "../../../../app/XXX.Web/NHibernate.config"); } [TearDown] public virtual void TearDown() { NHibernateSession.CloseAllSessions(); NHibernateSession.Reset(); } [Test] public void CanConfirmDatabaseMatchesMappings() { var allClassMetadata = NHibernateSession.GetDefaultSessionFactory().GetAllClassMetadata(); foreach (var entry in allClassMetadata) { NHibernateSession.Current.CreateCriteria(entry.Value.GetMappedClass(EntityMode.Poco)) .SetMaxResults(0).List(); } } /// <summary> /// Generates and outputs the database schema SQL to the console /// </summary> [Test] public void CanGenerateDatabaseSchema() { System.IO.TextWriter writeFile = new StreamWriter(@"d:/XXXSqlCreate.sql"); var session = NHibernateSession.GetDefaultSessionFactory().OpenSession(); new SchemaExport(configuration).Execute(true, false, false, session.Connection, writeFile); } private Configuration configuration; } I am trying to use: using FluentNHibernate.Automapping; using xxx.Core; using SharpArch.Data.NHibernate.FluentNHibernate; using FluentNHibernate.Automapping.Alterations; namespace xxx.Data.NHibernateMaps { public class x : IAutoMappingOverride<x> { public void Override(AutoMapping<Tx> mapping) { mapping.Map(x => x.text, "text").CustomSqlType("varchar(max)"); mapping.Map(x => x.url, "url").CustomSqlType("varchar(max)"); } } } To change the standard mapping of strings from NVARCHAR(255) to varchar(max). This is not picked up during the sql schema generation. I also tried: mapping.Map(x = x.text, "text").Length(100000); Any ideas? Thanks. Christian

  Read the article

• How do I grant a site's applet an AllPermission privilege?

  - by nahsra

  I'd like to specify certain applets to run with java.security.AllPermission on my computer (for debugging and security testing). However, I don't want to enable all applets that I run to have this permission. So, editing my user Java policy file (which I have ensured is the correct policy file through testing), I try to put this value: grant codeBase "http://host_where_applet_lives/-" { permission java.security.AllPermission; }; This value fails when the applet tries to do something powerful (create a new Thread, in my case). However, when I put the following value: grant { permission java.security.AllPermission; }; The applet is able to perform the powerful operation. The only difference is the lack of a codeBase attribute. An answer to a similar question asked here [1] seemed to suggest (but never show or prove) that AccessController.doPrivileged() calls may be required. To me, this sounds wrong as I don't need that call when I grant the permissions to all applets (the second example I showed). Even if this is a solution, littering the applets I run with AccessController.doPrivileged() calls is not easy or necessarily possible. To top it off, my tests show that this just doesn't work anyway. But I'm happy to hear more ideas around it. [1] http://stackoverflow.com/questions/1751412/cant-get-allpermission-configured-for-intranet-applet-can-anyone-help

  Read the article

• Unit test for Web Forms MVP presenter has a null Model

  - by jacksonakj

  I am using Web Forms MVP to write an DotNetNuke user control. When the 'SubmitContactUs' event is raised in my unit test the presenter attempts to set the 'Message' property on the Modal. However the View.Modal is null in the presenter. Shouldn't the Web Forms MVP framework automatically build a new View.Model object in the presenter? It could be that the 'Arrange' portion of my test is missing something that the presenter needs. Any help would be appreciated. Here is my test: using System; using AthleticHost.ContactUs.Core.Presenters; using AthleticHost.ContactUs.Core.Views; using Xunit; using Moq; namespace AthleticHost.ContactUs.Tests { public class ContactUsPresenterTests { [Fact] public void ContactUsPresenter_Sets_Message_OnSubmit() { // Arrange var view = new Mock<IContactUsView>(); var presenter = new ContactUsPresenter(view.Object); // Act view.Raise(v => v.Load += null, new EventArgs()); view.Raise(v => v.SubmitContactUs += null, new SubmitContactUsEventArgs("Chester", "Tester", "[email protected]", "http://www.test.com", "This is a test of the emergancy broadcast system...")); presenter.ReleaseView(); // Assert Assert.Contains("Chester Tester", view.Object.Model.Message); } } }

  Read the article

• How can I get browser to prompt to save password?

  - by Eric

  Hey, I'm working on a web app that has a login dialog that works like this: User clicks "login" Login form HTML is loaded with AJAX and displayed in DIV on page User enters user/pass in fields and clicks submit. It's NOT a <form> -- user/pass are submitted via AJAX If user/pass are okay, page reloads with user logged in. If user/pass are bad, page does NOT reload but error message appears in DIV and user gets to try again. Here's the problem: the browser never offers the usual "Save this password? Yes / Never / Not Now" prompt that it does for other sites. I tried wrapping the <div> in <form> tags with "autocomplete='on'" but that made no difference. Is it possible to get the browser to offer to store the password without a major rework of my login flow? thanks Eric p.s. to add to my question, I'm definitely working with browers that store passwords, and I've never clicked "never for this site" ...this is a technical issue with the browser not detecting that it's a login form, not operator error :-)

  Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >