Search Results

Search found 9557 results on 383 pages for 'x86 64'.

Page 271/383 | < Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >

• LSI RAID monitor reports "Consistency Check inconsistency logging disabled"

  - by carlpett

  I have a server with a LSI MegaRAID 9261-8i controller. Recently I started getting alerts like this one: Controller ID: 1 Consistency Check inconsistency logging disabled, too many inconsistencies on VD: 0 Generated on:Sat May 12 04:06:40 2012 SYSTEM DETAILS--- IP Address: 192.168.1.29 OS Name: Windows 7 x64 OS Version: 6.01 Driver Name: megasas.sys Driver Version: 4.5.1.64 IMAGE DETAILS--- BIOS Version: 2.120.33-1197 Firmware Package Version: 12.12.0-0045 Firmware Version: 3.21.00_4.11.05.00_0x05000000 VD 0 is a RAID mirror containing the system disk. I have searched and read, but cannot find any trace of how to actually do anything about this. I tried running a scandisk but that did not find anything (as I expected, since scandisk reads the disks as exposed by the controller, right?). The MegaRAID Storage Manager does not as far as I can see have any options for checking or fixing physical disks. The program claims the VD is "healty", and both disks have Error count 0. Also a bit strange is the System details in the message... The IP address is associated with the RAS (dial in) interface, and the OS should be Windows Server 2011 SBS. Has anyone else experienced this before? What can be done?

  Read the article

• Unpacking a ZTE ZXV10 H108L router firmware

  - by v3ng3ful

  I binwalked a firmware of a ZTE ZXV10 H108L, and got some encouraging results of uImage uboot, and LZMA compression, as well as a Squashfs 3.0 LZMA compressed filesystem. 256 0x100 uImage header, header size: 64 bytes, header CRC: 0xE70BCBB9, created: Thu Nov 10 04:54:54 2011, image size: 804172 bytes, Data Address: 0x80002000, Entry Point: 0x80266000, data CRC: 0x6EFE90F1, OS: Linux, CPU: MIPS, image type: OS Kernel Image, compression type: lzma, image name: MIPS Linux-2.6.20 320 0x140 LZMA compressed data, properties: 0x5D, dictionary size: 8388608 bytes, uncompressed size: 2637958 bytes 851968 0xD0000 Squashfs filesystem, big endian, lzma signature, version 3.0, size: 2543403 bytes, 632 inodes, blocksize: 65536 bytes, created: Thu Nov 10 04:56:12 2011 Now what I did is, to test several portions of the file (320byte-end, 851968byte-end, and many more) using dd, and trying with certain tools to uncompress/unpack the filesystem of the firmware. After some digging I found out the best tool to do this is the firmware_mod_kit, that understands a squashfs-lzma v3 filesystem. Although I ended up really frustrated as unsquashfs-lzma v3 reported a cold "zlib::uncompress failed, unknown error -3". Do you have any ideas? Could it be that, the firmware is corrupted on purpose to discourage attempts like this? Router file Thanks

  Read the article

• Apache - child process exited with status 255

  - by Brian

  I am running Windows 7 64-bit with an older version of (Apache 2.0.59) and PHP 5.2 - just switched from XP and wanted to keep the same versions. Everything will initially be working fine, but then I'll be trying to load a page and Apache crashes. I'll get an error in the browser that says "The connection to the server was reset while the page was loading." Then Apache stops running. Sometimes it can be restarted, but then crashes again on the next page load. Sometimes it can't even be restarted at all. Looking in the Apache error logs, I see a series of messages that goes something like: [notice] Apache/2.0.59 (Win32) PHP/5.2.13 configured -- resuming normal operations [notice] Server built: Jul 27 2006 15:55:03 [notice] Parent: Created child process 1220 [notice] Child 1220: Child process is running [notice] Child 1220: Acquired the start mutex. [notice] Child 1220: Starting 250 worker threads. [notice] Parent: child process exited with status 255 -- Restarting. I have just come from Win XP where I never had any problems - is this an issue with my Apache version on Win7? Or perhaps it's a configuration issue? Any help would be greatly appreciated, I've done days of research and found nothing helpful. Thanks, Brian

  Read the article

• SD Card reader not working on Sony Vaio

  - by TessellatingHeckler

  This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

  Read the article

• ssh key error - Permission denied (publickey,gssapi-keyex,gssapi-with-mic)

  - by user1963938

  Amazon Ec2 :: Redhat 6. 64 Bit I'm trying to follow the socks5 guidelines (http://www.catonmat.net/blog/linux-socks5-proxy/ ) to open a socks on one of our servers but unfortunately I got suck at step 1 . ssh -N -D 0.0.0.0:1080 localhost I get error Permission denied (publickey,gssapi-keyex,gssapi-with-mic). How do I fix it ? More debug info ssh -v -f -N -D 0.0.0.0:1080 localhost OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_0' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_0' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• How to make my SanDisk Cruzer Blade 4GB disk back to normal?

  - by Jack

  Currently, my SanDisk Cruzer Blade 4GB have become a 64MB Firebird RAW flash drive (thumb drive). I don't know why it become like this but when I plug it into a PC, it suddenly transform itself to become a 64MB flash drive. (From 4 GB to 64 MB, that is a huge change!) I read the following articles: http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/Cruzer-Blade-will-not-format/td-p/214932 http://forums.whirlpool.net.au/archive/1691847 http://forum.hddguru.com/sandiskfirebird-64mb-t23539.html and notice that their solutions does not work at all. Some of their solution is as follows: Using the HP USB Disk Storage Format Tool (http://files.extremeoverclocking.com/file.php?f=1970), which did not work for me as it could not format. Using the h2testw to see if it is genuine, which did not work for me because it is a RAW partition. Return to the vendor, which I doubt since the product only have 1 year warranty and it has expired. I also notice that the flash drive is very fragile as after a few use, the flash drive have become something like the following: (The upper cover of the USB connector was broken or torn) So, wondering if someone have any good solution to fix it back so that at least I can retrieve my data on the fragile thumb drive.

  Read the article

• How to disable monitor auto detection in Windows 7?

  - by Jay Yother

  I am currently running Windows 7 Ultimate 64-bit with a dual monitor setup with an NVIDIA 7950 GT graphics card. One monitor is dedicated to this machine and the other monitor is connected to a DVI KVM switch. When I switch to my other computer, Windows 7 disables the monitor. However, when I switch back it does not re-enable the monitor. The only circumstance that automatically re-enables the second monitor is when I switch back after Windows has put the monitors into power save mode. I am continually having to bring up the NVIDIA control panel to have it re-enable the monitor. Under Windows XP I would just disable the NVIDIA service to prevent it from auto-detecting the monitor (which doesn't solve the problem under Win7), and in Vista there was a registry hack that would prevent this. It looks as though that has been removed in Windows 7. I have found similar questions posted on this site, but nothing that matches my problem exactly. The following link is the question that comes the closest, but does not provide a solution to the problem. http://superuser.com/questions/96683/how-to-fix-monitor-detection-on-windows-7 Is there a way in Windows 7 to disable monitor auto-detection?

  Read the article

• IIS7Register failed with HRESULT 800700b7: 'Cannot create a file when that file already exists.'

  - by Optimax

  I am trying to re-install ASP.NET on IIS7 running in Win7/64, which magically stopped working all of as sudden. When I run aspnet_regiis -i, I get an error message that says Finished installing ASP.NET (4.0.30319). Setup has detected some errors during the operation. For details, please read the setup log file C:\Users\username\AppData\Local\Temp\ASPNETSetup_00031.log Looking at the log, it reports Failure Changing IIS ApplicationHost.config: IIS7Register failed with HRESULT 800700b7: 'Cannot create a file when that file already exists. ' The real problem surfaces when trying to access an ASP.NET web page from that server: HTTP Error 500.21 - Internal Server Error Handler "PageHandlerFactory-Integrated" has a bad module "ManagedPipelineHandler" in its module list and Most likely causes: Managed handler is used; however, ASP.NET is not installed or is not installed completely. There is a typographical error in the configuration for the handler module list. So it seems ASP.NET has NOT been properly re-installed. Now, I am aware of the alleged one-and-only remedy for this, repeated all over the Web, and referenced for example here: http://blogs.msdn.com/b/dougste/archive/2010/09/06/errors-installing-asp-net-4-0.aspx Except that the proposed solution does not work for me. I have expanded the %windir% macros within isapiCgiRestriction section for .NET 4.0 - and aspnet_regiis still fails for me. Any other ideas?

  Read the article

• Bitnami redmine error SVN

  - by Evgeniy

  I'm installing the Bitnami Redmine stack (redmine + subversion). Firstly I install configure and test it locally (Ubuntu 14.04 LTS). And everything is OK. I install Bitnami stack on server (Red Hat 4.4.7-4) and configure SVN. I commit files into SVN and connect project into Redmine with SVN repository, but when I try see it Rredmine displays 404 error. In the Redmine log file I see the following errors: Started GET "/redmine/projects/web-user-panel/repository" for 127.0.0.1 at 2014-04-24 11:34:20 +0300 Processing by RepositoriesController#show as HTML Parameters: {"id"=>"web-user-panel"} Current user: user (id=13) Error parsing svn output: #<REXML::ParseException: No close tag for /lists/list> /var/www/html/redmine/ruby/lib/ruby/1.9.1/rexml/parsers/treeparser.rb:28:in `parse' /var/www/html/redmine/ruby/lib/ruby/1.9.1/rexml/document.rb:245:in `build' /var/www/html/redmine/ruby/lib/ruby/1.9.1/rexml/document.rb:43:in `initialize' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/xml_mini/rexml.rb:30:in `new' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/xml_mini/rexml.rb:30:in `parse' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/xml_mini.rb:80:in `parse' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:313:in `parse_xml' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/subversion_adapter.rb:106:in `block in entries' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:258:in `call' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:258:in `block in shellout' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:255:in `popen' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:255:in `shellout' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/abstract_adapter.rb:212:in `shellout' /var/www/html/redmine/apps/redmine/htdocs/lib/redmine/scm/adapters/subversion_adapter.rb:100:in `entries' /var/www/html/redmine/apps/redmine/htdocs/app/models/repository.rb:198:in `scm_entries' /var/www/html/redmine/apps/redmine/htdocs/app/models/repository.rb:203:in `entries' /var/www/html/redmine/apps/redmine/htdocs/app/controllers/repositories_controller.rb:116:in `show' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/implicit_render.rb:4:in `send_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/base.rb:167:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/rendering.rb:10:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/callbacks.rb:18:in `block in process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:491:in `_run__2883861927089110970__process_action__2542827355008294621__callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:405:in `__run_callback' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:385:in `_run_process_action_callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:81:in `run_callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/callbacks.rb:17:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/rescue.rb:29:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/instrumentation.rb:30:in `block in process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/notifications.rb:123:in `block in instrument' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/notifications/instrumenter.rb:20:in `instrument' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/notifications.rb:123:in `instrument' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/instrumentation.rb:29:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/params_wrapper.rb:207:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activerecord-3.2.17/lib/active_record/railties/controller_runtime.rb:18:in `process_action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/base.rb:121:in `process' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/abstract_controller/rendering.rb:45:in `process' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal.rb:203:in `dispatch' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal/rack_delegation.rb:14:in `dispatch' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_controller/metal.rb:246:in `block in action' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/routing/route_set.rb:73:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/routing/route_set.rb:73:in `dispatch' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/routing/route_set.rb:36:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/journey-1.0.4/lib/journey/router.rb:68:in `block in call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/journey-1.0.4/lib/journey/router.rb:56:in `each' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/journey-1.0.4/lib/journey/router.rb:56:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/routing/route_set.rb:608:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-openid-1.3.1/lib/rack/openid.rb:98:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/best_standards_support.rb:17:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/etag.rb:23:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/conditionalget.rb:25:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/head.rb:14:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/params_parser.rb:21:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/flash.rb:242:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/session/abstract/id.rb:210:in `context' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/session/abstract/id.rb:205:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/cookies.rb:341:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activerecord-3.2.17/lib/active_record/query_cache.rb:64:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activerecord-3.2.17/lib/active_record/connection_adapters/abstract/connection_pool.rb:479:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/callbacks.rb:28:in `block in call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:405:in `_run__1805290955544829105__call__1486932417638469082__callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:405:in `__run_callback' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:385:in `_run_call_callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/callbacks.rb:81:in `run_callbacks' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/callbacks.rb:27:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/remote_ip.rb:31:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/debug_exceptions.rb:16:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/show_exceptions.rb:56:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/rack/logger.rb:32:in `call_app' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/rack/logger.rb:16:in `block in call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/tagged_logging.rb:22:in `tagged' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/rack/logger.rb:16:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/request_id.rb:22:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/methodoverride.rb:21:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/runtime.rb:17:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/activesupport-3.2.17/lib/active_support/cache/strategy/local_cache.rb:72:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/lock.rb:15:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.17/lib/action_dispatch/middleware/static.rb:63:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:136:in `forward' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:245:in `fetch' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:185:in `lookup' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:66:in `call!' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-cache-1.2/lib/rack/cache/context.rb:51:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/engine.rb:484:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/application.rb:231:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/railties-3.2.17/lib/rails/railtie/configurable.rb:30:in `method_missing' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/builder.rb:134:in `call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/urlmap.rb:64:in `block in call' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/urlmap.rb:49:in `each' /var/www/html/redmine/apps/redmine/htdocs/vendor/bundle/ruby/1.9.1/gems/rack-1.4.5/lib/rack/urlmap.rb:49:in `call' /var/www/html/redmine/ruby/lib/ruby/gems/1.9.1/gems/passenger-4.0.40/lib/phusion_passenger/rack/thread_handler_extension.rb:74:in `process_request' /var/www/html/redmine/ruby/lib/ruby/gems/1.9.1/gems/passenger-4.0.40/lib/phusion_passenger/request_handler/thread_handler.rb:141:in `accept_and_process_next_request' /var/www/html/redmine/ruby/lib/ruby/gems/1.9.1/gems/passenger-4.0.40/lib/phusion_passenger/request_handler/thread_handler.rb:109:in `main_loop' /var/www/html/redmine/ruby/lib/ruby/gems/1.9.1/gems/passenger-4.0.40/lib/phusion_passenger/request_handler.rb:448:in `block (3 levels) in start_threads' ... No close tag for /lists/list Line: 4 Position: 93 Last 80 unconsumed characters: Output was: <?xml version="1.0" encoding="UTF-8"?> <lists> <list path="svn://127.0.0.1/voxysuser"> Rendered common/error.html.erb within layouts/base (0.1ms) Completed 404 Not Found in 69.1ms (Views: 15.1ms | ActiveRecord: 3.0ms) How can I resolve this problem? I googled it, but similar problem fixed should be fixed 3 years ago. I'm installing the latest Bitnami Redmine 2.5.1-1 stack. UPDATE Well, I found next way. If I use the http protocol it works fine, but I should remove access for svn by web. That's why I create virtual host on localhost and get info from svn use 127.0.0.1 IP. <VirtualHost 127.0.0.1:8000> <Location /repo> DAV svn SVNPath "PATH_TO_MY_REPOSITORY" </Location> And this it work good.

  Read the article

• How to build glibc 2.11.2 on RHEL5?

  - by netvope

  Using gcc-4.4.4 or 4.5.0, I'm unable to make glibc-2.11.2 on RHEL 5.5: .././scripts/mkinstalldirs /dev/shm/glibc-2.11.2-build/sunrpc/rpcsvc CPP='gcc -B/home/klaw/share/rhel5/ -E -x c-header' /dev/shm/glibc-2.11.2-build/elf/ld-linux-x86-64.so.2 --library-path /dev/shm/glibc-2.11.2-build:/dev/shm/glibc-2.11.2-build/math:/dev/shm/glibc-2.11.2-build/elf:/dev/shm/glibc-2.11.2-build/dlfcn:/dev/shm/glibc-2.11.2-build/nss:/dev/shm/glibc-2.11.2-build/nis:/dev/shm/glibc-2.11.2-build/rt:/dev/shm/glibc-2.11.2-build/resolv:/dev/shm/glibc-2.11.2-build/crypt:/dev/shm/glibc-2.11.2-build/nptl /dev/shm/glibc-2.11.2-build/sunrpc/rpcgen -Y ../scripts -c rpcsvc/bootparam_prot.x -o /dev/shm/glibc-2.11.2-build/sunrpc/xbootparam_prot.T Inconsistency detected by ld.so: dynamic-link.h: 209: elf_get_dynamic_info: Assertion `info[15] == ((void *)0)' failed! make[2]: *** [/dev/shm/glibc-2.11.2-build/sunrpc/xnlm_prot.stmp] Error 127 make[2]: Leaving directory `/dev/shm/glibc-2.11.2/sunrpc' make[1]: *** [sunrpc/others] Error 2 make[1]: Leaving directory `/dev/shm/glibc-2.11.2' make: *** [all] Error 2 The error comes from the ld.so made by glibc: $ elf/ld.so Inconsistency detected by ld.so: dynamic-link.h: 209: elf_get_dynamic_info: Assertion `info[15] == ((void *)0)' failed! $ I got similar error with glibc-2.11.1 (only the line number of dynamic-link.h is different). Any ideas how I can fix this? gcc-4.4.4 and 4.5.0 were compiled with: binutils-2.20.1 gmp-5.0.1 mpc-0.8.2 mpfr-2.4.2

  Read the article

• Configuring VirtualBox host only networking: OSX host, Ubuntu guest

  - by Greg K

  I have a Ubuntu guest configured with two interfaces, eth0 is using NAT and works fine, I can access the net. The second interface eth1 is set to host only networking and VirtualBox has created a vboxnet0 virtual adapter on the host. I've configured vboxnet0 in VirtualBox adapter settings with the following: ip 192.168.21.20 subnet 255.255.255.0 Once the VM guest is running, ifconfig on OSX has vboxnet0 setup as: vboxnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 0a:00:27:00:00:00 inet 192.168.21.20 netmask 0xffffff00 broadcast 192.168.21.255 In the guest, eth0 is set to use DHCP, I've statically assigned eth1 to 192.168.21.20 (is this a mistake?): auto eth1 iface eth1 inet static address 192.168.21.20 netmask 255.255.255.0 network 192.168.21.0 broadcast 192.168.21.255 gateway 192.168.21.1 There is no device on 192.168.21.1 - what should I set my gateway to? In the guest the routes look like so: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.21.0 * 255.255.255.0 U 0 0 0 eth1 10.0.2.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 default 192.168.21.1 0.0.0.0 UG 100 0 0 eth1 Route table on OSX: $ netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 10.77.36.1 UGSc 28 0 en1 10.77.36/22 link#5 UCS 5 0 en1 10.77.39.38 127.0.0.1 UHS 1 2236 lo0 10.77.39.255 link#5 UHLWbI 1 66 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 8642 lo0 169.254 link#5 UCS 0 0 en1 192.168.21 link#7 UC 2 0 vboxnet 192.168.21.20 a:0:27:0:0:0 UHLWI 0 4 lo0 192.168.21.255 link#7 UHLWbI 2 64 vboxnet I can't SSH from the host to the guest (I used to be able to when the VM was configured with a bridged connection): $ ssh 192.168.21.20 ssh: connect to host 192.168.21.20 port 22: Connection refused What have I done wrong here? TIA

  Read the article

• DriveImage XML fails with a Windows Volume Shadow Service Error

  - by Ssvarc

  I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

  Read the article

• Apache2, FastCGI, PHP-FPM, APC on virtualmin panel with nginx front end reverse proxy

  - by Ünsal Korkmaz

  My dream setup: php 5.3.6 + mysql 5.5.10 on Apache2, FastCGI, PHP-FPM, APC with nginx 1.0 front end reverse proxy. And as free server management panel: Virtualmin GPL on centos 5.6 In a new centos 5.6 setup. Using this code for installing virtualmin: wget http://software.virtualmin.com/gpl/scripts/install.sh chmod +x install.sh ./install.sh After setup, i see php is 5.1 and mysql is 5.0 version. And system not supporting php-fpm but supporting fcgid wrapper. I did following changes: wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1.0-6.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh ius-release*.rpm epel-release*.rpm yum install yum-plugin-replace yum remove mysql.i386 yum replace mysql --replace-with mysql55 service mysqld restart chkconfig mysqld on mysql_upgrade --password=1234 yum replace php --replace-with php53u yum install php53u-fpm php53u-pecl-apc service httpd restart chkconfig php-fpm on service php-fpm start I am not sure why virtualmin installing both mysql.i386 and 64 bit version together but needed to remove one of them for using yum replace. So i had php 5.3.6 + mysql 5.5.10 with PHP-FPM, APC installed. But virtualmin not supporting PHP-FPM + fastcgi and its still running on fcgid. I am ultra newbie on server management so i couldnt find workaround after this. I want to switch fcgid wrapper to PHP-FPM + fastcgi at least for 1 virtual server. And if i can find a fix for this section, i want to setup nginx 1.0 as front end reverse proxy for serving static files and passing php files to apache. http://nginxcp.com/ is what i want but its for cpanel.

  Read the article

• Invalid format for New Relic licence when installing on Elastic Beanstalk

  - by BenFreke

  We've created an app that is running on an Elastic Beanstalk instance, 64 bit PHP version 5.4 (so not legacy). I've used the New Relic installation instructions to install New Relic, and viewing phpinfo shows that New Relic is installed. However, I'm not getting any data in New Relic and that is because it is saying that the licence is ***invalid format*** under newrelic.licence I'm getting the licence from my New Relic account, and it is a 40 character hexadecimal string. Here is the current newrelic.config file in the .ebextensions folder I'm using, with most of the licence key commented out. packages: yum: newrelic-php5: [] rpm: newrelic: http://yum.newrelic.com/pub/newrelic/el5/x86_64/newrelic-repo-5-3.noarch.rpm commands: configure_new_relic: command: newrelic-install install env: NR_INSTALL_SILENT: true NR_INSTALL_KEY: ec9a4... Skitch of relevant phpinfo Can anyone shed some light on what's going on here? I've tried two different New Relic licence keys with the same error, I've also surrounded it with a single quote mark and tried uppercase only. And at this point I'm out of ideas on what to try. We're not AWS gurus so it could very easily be something simple like not opening a port to allow the licence to be validated?

  Read the article

• php-fpm: very high server load

  - by Derp Derpington

  Since today my webserver (nginx + php-fpm + mysql on a VPS) is very slow. htop says: 1 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Tasks: 63 total, 13 running 2 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Load average: 11.67 10.95 6.95 3 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Uptime: 00:18:40 4 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] 5 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] 6 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] Mem[||||||||||| 137/1280MB] Swp[ 0/0MB] PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 6802 www 20 0 76232 12320 5716 R 27.0 0.9 0:06.48 php-fpm: pool www 7048 www 20 0 75200 12136 5700 R 52.0 0.9 0:03.64 php-fpm: pool www 6699 www 20 0 74176 11124 5700 R 27.0 0.8 0:07.36 php-fpm: pool www 7029 www 20 0 73668 10380 5676 R 42.0 0.8 0:03.52 php-fpm: pool www 6995 www 20 0 76228 12456 5644 R 42.0 1.0 0:03.98 php-fpm: pool www 6858 www 20 0 74172 10684 5620 R 35.0 0.8 0:05.52 php-fpm: pool www 6998 www 20 0 75200 12072 5620 R 37.0 0.9 0:03.95 php-fpm: pool www 7098 www 20 0 75200 12052 5616 R 42.0 0.9 0:02.33 php-fpm: pool www 7093 www 20 0 76228 12496 5612 R 37.0 1.0 0:03.02 php-fpm: pool www 7226 www 20 0 74692 11080 5588 R 32.0 0.8 0:00.66 php-fpm: pool www CPU: (cat /proc/cpuinfo | grep model) model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz I think a load of 10 and 100% cpu usage is not normal... How can i fix that?

  Read the article

• javaws not found

  - by Hunt

  I have a server which has centos installed in it. Recently I have installed jdk 1.6 into it. When I try to run java command from shell it's working perfectly fine. Java is stored into /usr/java/jdk1.6.0_25 and path is set to /usr/bin/ when I type which java. When I tried running javaws (which comes with the jdk 1.6 only) it is showing me following error: Java Web Start splash screen process exiting ... Bad installation: JAVAWS_HOME not set: No such file or directory Executing env command prints following details: HOSTNAME=XX-XXX-XXX-XX TERM=xterm SHELL=/bin/bash HISTSIZE=1000 OLDPWD=/usr/java SSH_TTY=/dev/pts/1 USER=root LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35: JAVA_PATH=/usr/java/jre1.6.0_24/jre/bin MAIL=/var/spool/mail/root PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/usr/java/jre1.6.0_24/jre/bin INPUTRC=/etc/inputrc PWD=/usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin JAVA_HOME=/usr/java/jre1.6.0_24/jre/bin LANG=en_US.UTF-8 SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass SHLVL=1 HOME=/root LOGNAME=root JAVAWS_HOME=/usr/java/jre1.6.0_24/bin SSH_CONNECTION=175.100.170.26 3387 64.150.190.94 22 LESSOPEN=|/usr/bin/lesspipe.sh %s G_BROKEN_FILENAMES=1 _=/bin/env

  Read the article

• How to resolve Windows Update Error 8024402F on Windows 7 Home Premium 64bit?

  - by Day

  I have been having the same problem with Windows Updates on 2 of my machines at home, both running Windows 7 Home Premium 64-bit. One of the 2 machines is a brand new install, the other has run Windows Update in the past, but is also not working now. When I manually check for updates using the Control Panel, I get error code 8024402F: I followed the link to "Get help with this error", which brings up several articles in Windows Help and Support, none of which are for this specific error code. From the help and general googling I've tried: Checking internet connectivity. Most of the help suggests that this error is caused by a general internet connectivity problem. But if you're reading this, my connection is definitely working fine. Disabling antivirus temporarily and trying to run Windows Update. This didn't help (I run AVG free) Running Control Panel - Troubleshooting - Security Systems - Fix Problems with Windows Update. This said it detected and resolved problems, but didn't help. Update using IE (as I used to in XP). Go to http://windowsupdate.microsoft.com/ redirects me to http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx for which IE displays a "connection problem" (i.e. site unreachable) I've had the same problem for 24 hours now, so surely the Windows Update servers haven't been down this whole time? A quick check on twitter shows no worldwide outcry about Windows Update being unavailable, so is it just me? I'm based in the UK, but I notice that the http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx URL is also unavailable using ''wget'' from my webserver in Chicago. day@ord1:~$ wget http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx --2011-03-17 00:01:27-- http://test.update.microsoft.com/windowsupdate/v6/vistadefault.aspx Resolving test.update.microsoft.com... failed: Name or service not known. wget: unable to resolve host address `test.update.microsoft.com' day@ord1:~$ host test.update.microsoft.com Host test.update.microsoft.com not found: 3(NXDOMAIN)

  Read the article

• How do I upgrade PHP on CentOS and Kloxo?

  - by Emerson

  I need to upgrade PHP so that I can upgrade joomla on my dedicated server. I have: kloxo 6.1.6 php-5.2.17-1 Linux CentOS-55-64-minimal 2.6.18-194.32.1.el5 x86_64 x86_64 x86_64 GNU/Linux I searched everywhere and I could only find that PHP 5.3 isn't compatible with zend. I would like to upgrade to 5.2.4, which is the minimum for joomla 1.6 and 1.7. I tried to run: yum update php.x86_64 Which is the PHP package installed, but it didn't work. This is a production server with quite a few users across many sites, so I wanted to do it as safely as possible. Is it safe to run "yum update"? It showed me 6 packages to install and 125 packages to update, including a kernel. Is that safe? I haven't touched kloxo's yum repositories. Update: I just successfully ran "yum update". Now I think I need to know how to add a new repository that has the 5.2.4 and how to update to that specific version. Any ideas?

  Read the article

• How to shrink Windows 7 boot partition with unmovable files.

  - by Alex Che

  I have just bought HP laptop with Windows 7 (64 bit). It has 500 GB HDD with three partitions: small hidden system partition, 12 GiB HP recovery partition, and 450 GiB C: boot partition. I would like to split this large C: partition into two partitions, leaving only 100 GiB for system, and giving the rest to new data partition. Although Windows built-in Disk Management utility has an option to shrink the bootable partition, it only allows me to shrink it roughly by half, even though only 20 GiB on the partition is used. As far as I understand, system unmovable files lie in the middle of the partition, preventing Disk Management utility to do what I want. And since new HP laptops don't come with OS installation disks (they only allow you to create recovery disks youself), I can't just repartition HDD and then reinstall OS. So, is there any way to shrink C: bootable partition and preserve Windows 7 working? P.S.: I have tried to use 3rd party GParted utility, and after shrinking the partition Windows 7 stopped booting with BSOD. System recovery didn't work, and I had to do factory recover. Since this is a long process, I would like to avoid doing it again :) So, please, suggest only proven solutions.

  Read the article

• VMware Tools in Ubuntu guest on VMware Server 2 do not build

  - by ulf

  When trying to build the VMware tools in my Ubuntu 9.10 64 bit guest on a VMware Server 2.0.2 host with Debian 5 I'm getting strange errors like: Building the vmmemctl module. Using 2.6.x kernel build system. make: Gehe in Verzeichnis '/tmp/vmware-config8/vmmemctl-only' make -C /lib/modules/2.6.31-19-server/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Betrete Verzeichnis '/usr/src/linux-headers-2.6.31-19-server' CC [M] /tmp/vmware-config8/vmmemctl-only/backdoorGcc64.o In file included from /tmp/vmware-config8/vmmemctl-only/backdoor.h:29, from /tmp/vmware-config8/vmmemctl-only/backdoorGcc64.c:38: /tmp/vmware-config8/vmmemctl-only/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined CC [M] /tmp/vmware-config8/vmmemctl-only/os.o In file included from /tmp/vmware-config8/vmmemctl-only/os.c:51: /tmp/vmware-config8/vmmemctl-only/compat_wait.h:78: error: conflicting types for ‘poll_initwait’ include/linux/poll.h:70: note: previous declaration of ‘poll_initwait’ was here make[2]: *** [/tmp/vmware-config8/vmmemctl-only/os.o] Fehler 1 make[1]: *** [_module_/tmp/vmware-config8/vmmemctl-only] Fehler 2 make[1]: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.31-19-server' make: *** [vmmemctl.ko] Fehler 2 make: Verlasse Verzeichnis '/tmp/vmware-config8/vmmemctl-only' Unable to build the vmmemctl module. I googled half the Internet but couldn't come to a solution. None of the kernel modules seems to build correctly. While googling I read something about a bug in this kernel tree.

  Read the article

• Make error when compiling Perl 5.12.1 (RHEL 5.5)

  - by ascent1729

  I am trying to compile Perl 5.12.1 in my home directory on Red Hat Enterprise Linux 5.5. However, when I try to make, I eventually receive the following error: Making IO (all) make[1]: Entering directory `/users/rmi1/build/perl-5.12.0/dist/IO' make[1]: Leaving directory `/users/rmi1/build/perl-5.12.0/dist/IO' Making all in dist/IO make all PERL_CORE=1 LIBPERL_A=libperl.a LINKTYPE=dynamic make[1]: Entering directory `/users/rmi1/build/perl-5.12.0/dist/IO' cc -c -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.25_02\" -DXS_VERSION=\"1.25_02\" -fPIC "-I../.." IO.c IO.xs: In function ‘XS_IO__Poll__poll’: IO.xs:249: error: invalid application of ‘sizeof’ to incomplete type ‘struct pollfd’ IO.xs:253: error: invalid use of undefined type ‘struct pollfd’ IO.xs:253: error: dereferencing pointer to incomplete type IO.xs:255: error: invalid use of undefined type ‘struct pollfd’ IO.xs:255: error: dereferencing pointer to incomplete type IO.xs:257: error: invalid use of undefined type ‘struct pollfd’ IO.xs:257: error: dereferencing pointer to incomplete type IO.xs:261: error: invalid use of undefined type ‘struct pollfd’ IO.xs:261: error: dereferencing pointer to incomplete type IO.xs:262: error: invalid use of undefined type ‘struct pollfd’ IO.xs:262: error: dereferencing pointer to incomplete type make[1]: *** [IO.o] Error 1 make[1]: Leaving directory `/users/rmi1/build/perl-5.12.0/dist/IO' Unsuccessful make(dist/IO): code=512 at make_ext.pl line 449. make: *** [lib/auto/IO/IO.so] Error 2 What could be causing this?

  Read the article

• Server 2008 R2 - Unable to install any printer drivers

  - by toffitomek

  My problem is exactly this same as described here: Server 2008 R2 - Unable to install any printer drivers Options - google groups I have few Windows 2008 R2 (no SP1) servers in remote offices, mostly in Domain Controller, and many of them have problems installing ANY printer drivers. following errors show up in Event Log when adding printer driver under Print and Document Services/Print Management/Print Services/ /Drivers OR trying any other way to install drivers: EventID 215: Installing printer driver - failed, error code 0x57, HRESULT 0x80070057. See the event user data for context information. EventID 215: Installing printer driver Canon iR C2380/2550 PCL6 failed, error code 0x0, HRESULT 0x80070057. See the event user data for context information. EventID 215: Installing printer driver Canon iR C2380/2550 PCL6 failed, error code 0x490, HRESULT 0x80070057. See the event user data for context information. in this particular server case this is problem with Canon iRC 2380i printer with Canon Generic PCL6 Driver, but it seems to apply to any driver and any printer (tried different drivers, different versions, PCL, postscript, etc) I'm using 64 bit drivers that should be working on this platform. Any help will be appreciated.

  Read the article

• Inkscape: what are "line" objects?

  - by Peter Mortensen

  What is a "line" object in Inkscape? Drawing lines in Inkscape is by using the tool "Draw Bezier curves and straight lines (Shift+F6)". This creates objects of another type, "path". Using Inkscape: is there a way to convert an object of type "line" into an object of the more general type "path"? I have imported a drawing (mostly lines, rectangles and text) that has been through Adobe Illustrator: originally made in Inkscape, imported into Illustrator, edited, saved from Illustrator as SVG, imported into Inkscape. Sample from the imported SVG file: <path id="path5855" stroke="#000000" d=" M320.198,275.935" /> <line fill="none" stroke="#000000" x1="348.553" y1="45.097" x2="348.553" y2="185.346" id="line3368" /> Update 1: I have inspected the original XML (SVG) file from 2006 and it does not contain any "line" XML tags. Thus it must be a crime of Adobe Illustrator. When a line is selected in this imported SVG file the bottom panel displays: "Line in root. Click selection to toggle scale/rotation handles.". When a line is selected that was drawn in Inkscape the bottom panel displays: "Path (2 nodes) in Layer 1. Click selection to toggle scale/rotation handles." What is the difference between "line" and "path"? Is "line" some kind of read-only/non-editable object? A generic term like "line" is not easy to use in search, but I have now found the definitions for "line" and "path": SVG line: http://www.w3schools.com/svg/svg_line.asp SVG path: http://www.w3schools.com/svg/svg_path.asp Platform: Inkscape v0.46 (2008-03-10), Windows XP 64 bit, 8 GB RAM.

  Read the article

• Mac OS X 10.6 assign mapped IP to Windows 7 VM in Parallels

  - by Alex

  I'm trying to assign a mapped IP address to a Windows 7 VM. I have setup running in Parallels 5 in wireless bridged networking mode. The problem I am having is that it looks like the VM is actually broadcasting the MAC address of the host machine and thus causing a clash of IP addresses on the network. This is my current setup: Macbook Pro :~ ifconfig -a lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:26:b0:df:31:b4 media: autoselect status: inactive supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,flow-control> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,flow-control> 100baseTX <full-duplex,hw-loopback> 1000baseT <full-duplex> 1000baseT <full-duplex,flow-control> 1000baseT <full-duplex,hw-loopback> fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:26:b0:ff:fe:df:31:b4 media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::226:bbff:fe0a:59a1%en1 prefixlen 64 scopeid 0x6 inet 192.168.1.97 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:26:bb:0a:59:a1 media: autoselect status: active supported media: autoselect vnic0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.1.81 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:1c:42:00:00:08 media: autoselect status: active supported media: autoselect vnic1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255 ether 00:1c:42:00:00:09 media: autoselect status: active supported media: autoselect Windows 7: :~ ipconfig -all Windows IP Configuration Host Name . . . . . . . . . . . . : Alex-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Parallels Ethernet Adapter Physical Address. . . . . . . . . : 00-1C-42-B8-E7-B4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{ACAC7EBB-5E5F-4F53-AFD9-E6EAEEA0FEE2}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Billion Bipac 7200 modem router: In DHCP server settings have the following two mapping entries. alex-macbook-win7 00:1c:42:00:00:08 192.168.1.98 alex-macbook 00:26:bb:0a:59:a1 192.168.1.97 The problem I have is that when the VM starts up it gets assigned the 192.168.1.97 address instead of the .98 address and thus networking on the host stops working as it says there is a clash. I have tried removing the mapping for "alex-macbook" which results in the guest machine being assigned a normal DHCP address and NOT the one that is in the mapping of the router.

  Read the article

• Wacom consumer tablet driver service may crash while opening Bamboo Preferences, often after resuming computer from sleep

  - by DragonLord

  One of the ExpressKeys on my Wacom Bamboo Capture graphics tablet is mapped to Bamboo Preferences, so that I can quickly access the tablet settings and view the battery level (I have the Wireless Accessory Kit installed). However, when I connect the tablet to the computer, in wired or wireless mode, and attempt to open Bamboo Preferences, the Wacom consumer tablet driver service may crash, most often when I try to do so after resuming the computer from sleep. There is usually no direct indication of the crash (although I once did get Tablet Service for consumer driver stopped working and was closed), only that the cursor shows that the system is busy for a split second. When this happens, the pen no longer tracks on the screen when in proximity of the tablet (even though it is detected by the tablet itself); however, touch continues to function correctly. To recover from this condition, I need to restart the tablet driver services. I got tired of having to go through Task Manager to restart the service every time this happens, so I ended up writing the following command script, with a shortcut on the desktop for running it with elevated privileges: net stop TabletServicePen net start TabletServicePen net stop TouchServicePen net start TouchServicePen Is there something I can do to prevent these crashes from happening in the first place, or do I have have to deal with this issue until the driver is updated? Windows 7 Home Premium 64-bit. Tablet drivers are up to date. Technical details Action Center gives the following details about the crash in Reliability Monitor: Source Tablet Service for consumer driver Summary Stopped working Date ?10/?15/?2012 2:48 PM Status Report sent Description Faulting Application Path: C:\Program Files\Tablet\Pen\Pen_Tablet.exe Problem signature Problem Event Name: APPCRASH Application Name: Pen_Tablet.exe Application Version: 5.2.5.5 Application Timestamp: 4e694ecd Fault Module Name: Pen_Tablet.exe Fault Module Version: 5.2.5.5 Fault Module Timestamp: 4e694ecd Exception Code: c0000005 Exception Offset: 00000000002f6cde OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 9d4f Additional Information 2: 9d4f1c8d2c16a5d47e28521ff719cfba Additional Information 3: 375e Additional Information 4: 375ebb9963823eb7e450696f2abb66cc Extra information about the problem Bucket ID: 45598085 Exception code 0xC0000005 means STATUS_ACCESS_VIOLATION. The event log contains essentially the same information.

  Read the article

< Previous Page | 267 268 269 270 271 272 273 274 275 276 277 278  | Next Page >