Search Results

Search found 8286 results on 332 pages for 'defined'.

Page 272/332 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

  • how to delete a line from file using awk filtered by some string

    - by embedded
    I have a file delimited by space. I need to write an awk command that receives a host name argument and it should replace the host name if it already defined in the file. It must be a full match not partially - if the file contains this host name: localhost searching for "ho" will fail and it will be added to the end of the file. another option is a delete: again awk receives host name argument and it should remove it from the file if exists. This is what I have so far: (It needs some enhancements) if [ "$DELETE_FLAG" == "" ]; then # In this case the entry should be added or updated # if clause deals with updating an existing entry # END clause deals with adding a new entry awk -F"[ ]" "BEGIN { found = 0;} \ { \ if ($2 == $HOST_NAME) { \ print \"$IP_ADDRESS $HOST_NAME\"; \ found = 1; \ } else { \ print \$0; \ } \ } \ END { \ if (found == 0) { \ print \"$IP_ADDRESS $HOST_NAME\"; } \ } " \ /etc/hosts > /etc/temp_hosts else # Delete an existing entry awk -F'[ ]' '{if($2 != $HOST_NAME) { print $0} }' /etc/hosts > /etc/temp_hosts fi Thanks

    Read the article

  • Is there unresizable space in latex? Pictures in good looking grid.

    - by drasto
    I've created latex macro to typeset guitar chords diagrams(using picture environment). Now I want to make diagrams of different appear in good looking grid when typeset one next to each other as the picture shows: The picture. (on the picture: Labeled "First" bad layout of diagrams, labeled "Second" correct layout when equal number of diagrams in line) I'm using \hspace to make some skips between diagrams, otherwise they would be too near to each other. As you can see in second case when latex arrange pictures in so that there is same number of them in each line it works. However if there is less pictures in the last line they become "shifted" to the right. I don't want this. I guess is because latex makes the space between diagrams in first line a little longer for the line to exactly fit the page width. How do I tell latex not to resize spaces created by \hspace ? Or is there any other way ? I guess I cannot use tables because I don't know how many diagrams will fit in one line... This is current state of code: \newcommand{\spaceForChord}{1.7cm} \newcommnad{\chordChart}[1]{% %calculate dimensions xdim and ydim according to setings \begin{picture}(xdim, ydim){% %draw the diagram inside defined area }% \hspace*{\spaceForChord}% \hspace*{-\xdim}% }% %end preambule and begin document \begin{document} First:\\* \\* \chordChart{...some arguments for to change diagram look...} \chordChart{...some arguments for to change diagram look...} \chordChart{...some arguments for to change diagram look...} \chordChart{...some arguments for to change diagram look...} \chordChart{...some arguments for to change diagram look...} %...above line is repeated 12 more times to produce result shown at the picture \end{document} Thanks for any help.

    Read the article

  • Interesting Scala typing solution, doesn't work in 2.7.7?

    - by djc
    I'm trying to build some image algebra code that can work with images (basically a linear pixel buffer + dimensions) that have different types for the pixel. To get this to work, I've defined a parametrized Pixel trait with a few methods that should be able to get used with any Pixel subclass. (For now, I'm only interested in operations that work on the same Pixel type.) Here it is: trait Pixel[T <: Pixel[T]] { def mul(v: Double): T def max(v: T): T def div(v: Double): T def div(v: T): T } Now I define a single Pixel type that has storage based on three doubles (basically RGB 0.0-1.0), I've called it TripleDoublePixel: class TripleDoublePixel(v: Array[Double]) extends Pixel[TripleDoublePixel] { var data: Array[Double] = v def this() = this(Array(0.0, 0.0, 0.0)) def toString(): String = { "(" + data(0) + ", " + data(1) + ", " + data(2) + ")" } def increment(v: TripleDoublePixel) { data(0) += v.data(0) data(1) += v.data(1) data(2) += v.data(2) } def mul(v: Double): TripleDoublePixel = { new TripleDoublePixel(data.map(x => x * v)) } def div(v: Double): TripleDoublePixel = { new TripleDoublePixel(data.map(x => x / v)) } def div(v: TripleDoublePixel): TripleDoublePixel = { var tmp = new Array[Double](3) tmp(0) = data(0) / v.data(0) tmp(1) = data(1) / v.data(1) tmp(2) = data(2) / v.data(2) new TripleDoublePixel(tmp) } def max(v: TripleDoublePixel): TripleDoublePixel = { val lv = data(0) * data(0) + data(1) * data(1) + data(2) * data(2) val vv = v.data(0) * v.data(0) + v.data(1) * v.data(1) + v.data(2) * v.data(2) if (lv > vv) (this) else v } } Now I want to write code to use this, that doesn't have to know what type the pixels are. For example: def idiv[T](a: Image[T], b: Image[T]) { for (i <- 0 until a.data.size) { a.data(i) = a.data(i).div(b.data(i)) } } Unfortunately, this doesn't compile: (fragment of lindet-gen.scala):145: error: value div is not a member of T a.data(i) = a.data(i).div(b.data(i)) I was told in #scala that this worked for someone else, but that was on 2.8. I've tried to get 2.8-rc1 going, but it doesn't compile for me. Is there any way to get this to work in 2.7.7?

    Read the article

  • Casting pointer to object to void * in C++

    - by JB
    I've been reading StackOverflow too much and started doubting all the code I've ever written, I keep thinking "Is that undefined behavour?" even in code that has been working for ages. So my question - Is it safe and well defined behavour to cast a pointer to an object (In this case abstract interface classes) to a void* and then later on cast them back to the original class and call method using them? I'm fully aware that the code that does this is probably awful. I wouldn't even consider writing it like this now (this is old code which I don't really want to change), so I'm not looking for a discussion of better ways to do this. I already know how to write it better if I ever did this again. But if it's actually broken to rely on this in C++ then I'll have to look at changing the code, if it's merely awful code then changing it won't be a priority. I would have had no doubts about something this simple a year or two ago but as my understanding of C++ increases I actually find I have more and more worries about code being safe under the standards even if it works perfectly well. Perhaps reading too much stack overflow is a bad thing for productivity sometimes :P

    Read the article

  • In CakePHP, how do I create a form to list models withing a date range?

    - by anonymous coward
    I have a very simple model that includes the auto-filled field much like 'created'. (DateTime format). I'd like to use the Form helpers if possible, to validate the date fields and whatnot. I'd like a simple form with a "Begin Date" (YMD, 12 hours), and an "End Date" (same format). There is already a controller action set up as follows: function view_between($start_date = null, $end_date = null) { // ... stuff that works correctly when the URL is manually entered. } Have I defined the controller wrong, or how can I pass these values into that function? The reason I'm stuck is because I tried adding a $form->input('my_datetime_field' ...) twice, but obviously the name/id were the same on the respective elements. I have also tried using $form->dateTime(...) with similar results. I'm not sure how to uniquely identify a Begin and End date selection, when it should interact with a single field. Am I going about this wrong? A kind shove in the right direction should suffice.

    Read the article

  • got undefined variable in php code

    - by Newbie New
    I got a error message when I run my php however the result is come out this is my code function cart() { foreach($_SESSION as $name => $value) { if ($value>0) { if (substr($name, 0, 5) == 'cart_'){ $id = substr($name, 5, (strlen($name)-5)); $get = mysql_query('SELECT id, name, price FROM products WHERE id=' .mysql_real_escape_string((int)$id)); while ($get_row = mysql_fetch_assoc($get)){ $sub = $get_row['price'] * $value; echo $get_row['name'].' x '.$value.' @ &pound'.number_format($get_row['price'], 2).' = &pound'.number_format($sub, 2).' <a href="cart.php?remove='.$id.'">[-]</a> <a href="cart.php?add='.$id.'">[+]</a> <a href="cart.php?delete='.$id.'">[Delete]</a><br />' ; } } $total += $sub; } } echo $total; } ?> I got a error message Notice: Undefined variable: total in C:\xampp\htdocs\shoppingcart\cart.php on line 54 which line 54 is echo $total; what's wrong with my code?? I think I have defined the code in $total += $sub; thanks for helping me :)

    Read the article

  • How do I pass references as method parameters across AppDomains?

    - by Thiado de Arruda
    I have been trying to get the following code to work(everything is defined in the same assembly) : namespace SomeApp{ public class A : MarshalByRefObject { public byte[] GetSomeData() { // } } public class B : MarshalByRefObject { private A remoteObj; public void SetA(A remoteObj) { this.remoteObj = remoteObj; } } public class C { A someA = new A(); public void Init() { AppDomain domain = AppDomain.CreateDomain("ChildDomain"); string currentAssemblyPath = Assembly.GetExecutingAssembly().Location; B remoteB = domain.domain.CreateInstanceFromAndUnwrap(currentAssemblyPath,"SomeApp.B") as B; remoteB.SetA(someA); // this throws an ArgumentException "Object type cannot be converted to target type." } } } What I'm trying to do is pass a reference of an 'A' instance created in the first AppDomain to the child domain and have the child domain execute a method on the first domain. In some point on 'B' code I'm going to call 'remoteObj.GetSomeData()'. This has to be done because the 'byte[]' from 'GetSomeData' method must be 'calculated' on the first appdomain. What should I do to avoid the exception, or what can I do to achieve the same result?

    Read the article

  • How to use accessors within the same class in Objective C?

    - by Azeworai
    Hi, I have a few properties defined in my header file like so @property (assign) bool connectivity_N; @property (assign) bool isConnected_N; In my implementation file I have an init and the synthesized properties like so @implementation Map @synthesize connectivity_N; @synthesize isConnected_N; a init to set the initial values like so -(id) init { if( (self=[super init]) ) { //initialise default properties self.connectivity_N=NO; self.isConnected_N=NO; } return self; } I'm running into an error that states Error: accessing unknown 'connectivity_N' class method. In this public method within the class +(bool) isConnectable:(directions) theDirection{ bool isTheDirectionConnectable= NO; switch (theDirection) { case north: isTheDirectionConnectable= self.connectivity_N; break; I'm not sure why is this so as I'm trying to grab the value of the property. According to the apple developer documentation "The default names for the getter and setter methods associated with a property are propertyName and setPropertyName: respectively—for example, given a property “foo”, the accessors would be foo and setFoo:" That has given me a clue that I've done something wrong here, I'm fairly new to objective C so would appreciate anyone who spends the time to explain this to me. Thanks!

    Read the article

  • Building a calendar navigation in Rails (controller and view links)

    - by user532339
    Trying to get the next month when clicking the link_to. I've done the following in the view. <%= form_tag rota_days_path, :method => 'get' do %> <p> <%= hidden_field_tag(:next_month, @t1) %> <%= link_to 'Next Month', rota_days_path(:next_month => @next_month)%> </p> <% end %> class RotaDaysController < ApplicationController # GET /rota_days # GET /rota_days.json # load_and_authorize_resource respond_to :json, :html def index @rota_days = RotaDay.all @hospitals = Hospital.all @t1 = Date.today.at_beginning_of_month @t2 = Date.today.end_of_month @dates = (@t1..@t2) #Concat variable t1 + t2 together # @next_month = Date.today + 1.month(params[: ??? ] #Old if params[:next_month] # @next_month = Date.today >> 1 @next_month = params[:next_month] + 1.month @t1 = @next_month.at_beginning_of_month @t2 = @next_month.end_of_month @dates = (@t1..@t2) end @title = "Rota" respond_to do |format| format.html # index.html.erb format.json { render json: @rota_days } end end I have identified that the reason why this may not be working is in because of the following in my controller @next_month = params[:next_month] + 1.month the last two called methods is defined only on time/date objects. but not on fixnum/string objects. I understand I am missing something from this Update I have found that the actual issue is that the `params[:next_month] is a string and I am trying to add a date to to it. Which means I need to convert the string to a date/time object. Console output: Started GET "/rota_days" for 127.0.0.1 at 2012-12-14 22:14:36 +0000 Processing by RotaDaysController#index as HTML User Load (0.0ms) SELECT `users`.* FROM `users` WHERE `users`.`id` = 1 LIMIT 1 RotaDay Load (0.0ms) SELECT `rota_days`.* FROM `rota_days` Hospital Load (1.0ms) SELECT `hospitals`.* FROM `hospitals` Rendered rota_days/index.html.erb within layouts/application (23.0ms) Role Load (0.0ms) SELECT `roles`.* FROM `roles` INNER JOIN `roles_users` ON `roles`.`id` = `roles_users`.`role_id` WHERE `roles_users`.`user_id` = 1 AND `roles`.`name` = 'Administrator' LIMIT 1 Completed 200 OK in 42ms (Views: 39.0ms | ActiveRecord: 1.0ms)

    Read the article

  • Problem accessing private variables in jQuery like chainable design pattern

    - by novogeek
    Hi folks, I'm trying to create my custom toolbox which imitates jQuery's design pattern. Basically, the idea is somewhat derived from this post: http://stackoverflow.com/questions/2061501/jquery-plugin-design-pattern-common-practice-for-dealing-with-private-function (Check the answer given by "David"). So here is my toolbox function: (function(window){ var mySpace=function(){ return new PrivateSpace(); } var PrivateSpace=function(){ var testCache={}; }; PrivateSpace.prototype={ init:function(){ console.log('init this:', this); return this; }, ajax:function(){ console.log('make ajax calls here'); return this; }, cache:function(key,selector){ console.log('cache selectors here'); testCache[key]=selector; console.log('cached selector: ',testCache); return this; } } window.hmis=window.m$=mySpace(); })(window) Now, if I execute this function like: console.log(m$.cache('firstname','#FirstNameTextbox')); I get an error 'testCache' is not defined. I'm not able to access the variable "testCache" inside my cache function of the prototype. How should I access it? Basically, what I want to do is, I want to cache all my jQuery selectors into an object and use this object in the future.

    Read the article

  • JQuery transition animation

    - by kk-dev11
    This program randomly selects two employees from a json-object Employees array, winnerPos is already defined. For better user experience I programmed these functions to change pictures one by one. The animation stops when the randomly selected person is shown on the screen. The slideThrough function will be triggered when the start button is pressed. function slideThrough() { counter = 0; start = true; clearInterval(picInterval); picInterval = setInterval(function () { changePicture(); }, 500); } function changePicture() { if (start) { if (counter > winnerPos) { setWinner(); start = false; killInterval(); } else { var employee = Employees[counter]; winnerPic.fadeOut(200, function () { this.src = 'img/' + employee.image; winnerName.html(employee.name); $(this).fadeIn(300); }); counter++; } } } The problem is the animation doesn't work smoothly. At first it works, but not perfect. The second time the transition happens in an irregular way, i.e. different speed and fadeIn/fadeOut differs from picture to picture. Could anyone help me to fine-tune the transition?

    Read the article

  • Java : Inner class of an interface (from google guice)

    - by bsreekanth
    Hello, I was going through the source of google guice, and found an unfamiliar piece of code. It would be great learning if someone can clarify it. I have very basic understanding of inner classes, as they keep the implementation details close to the public interface. Otherwise the inner class may pollute the namespace. Now, I see the below lines at public static final Scope SINGLETON = new Scope() { public <T> Provider<T> scope(final Key<T> key, final Provider<T> creator) { return new Provider<T>() { ......... } It assign an inner class instance to the static variable, but Scope is an interface defined as (at) public interface Scope Is it possible to instantiate the interface?? or is it a succinct syntax for an anonymous implementation of an interface?? If anyone can explain what the author is intended by multiple nested classes above (Scope and Provider), and why it make sense to implement this way, it would help me to understand. thanks.

    Read the article

  • Importing a C DLL's functions into a C++ program

    - by bobobobo
    I have a 3rd party library that's written in C. It exports all of its functions to a DLL. I have the .h file, and I'm trying to load the DLL from my C++ program. The first thing I tried was surrounding the parts where I #include the 3rd party lib in #ifdef __cplusplus extern "C" { #endif and, at the end #ifdef __cplusplus } // extern "C" #endif But the problem there was, all of the DLL file function linkage looked like this in their header files: a_function = (void *)GetProcAddress(dll, "a_function"); While really a_function had type int (*a_function) (int *). Apparently MSVC++ compiler doesn't like this, while MSVC compiler does not seem to mind. So I went through (brutal torture) and fixed them all to the pattern typedef int (*_a_function) (int *); _a_function a_function ; Then, to link it to the DLL code, in main(): a_function = (_a_function)GetProcAddress(dll, "a_function"); This SEEMS to make the compiler MUCH, MUCH happier, but it STILL complains with this final set of 143 errors, each saying for each of the DLL link attempts: error LNK2005: _a_function already defined in main.obj main.obj Multiple symbol definition errors.. sounds like a job for extern! SO I went and made ALL the function pointer declarations as follows: function_pointers.h typedef int (*_a_function) (int *); extern _a_function a_function ; And in a cpp file: function_pointers.cpp #include "function_pointers.h" _a_function a_function ; ALL fine and dandy.. except for linker errors now of the form: error LNK2001: unresolved external symbol _a_function main.obj Main.cpp includes "function_pointers.h", so it should know where to find each of the functions.. I am bamboozled. Does any one have any pointers to get me functional? (Pardon the pun..)

    Read the article

  • Help me convert .NET 1.1 Xml validation code to .NET 2.0 please.

    - by Hamish Grubijan
    It would be fantastic if you could help me rid of these warnings below. I have not been able to find a good document. Since the warnings are concentrated in just the private void ValidateConfiguration( XmlNode section ) section, hopefully this is not terribly hard to answer, if you have encountered this before. Thanks! 'System.Configuration.ConfigurationException.ConfigurationException(string)' is obsolete: 'This class is obsolete, to create a new exception create a System.Configuration!System.Configuration.ConfigurationErrorsException' 'System.Xml.XmlValidatingReader' is obsolete: 'Use XmlReader created by XmlReader.Create() method using appropriate XmlReaderSettings instead. http://go.microsoft.com/fwlink/?linkid=14202' private void ValidateConfiguration( XmlNode section ) { // throw if there is no configuration node. if( null == section ) { throw new ConfigurationException("The configuration section passed within the ... class was null ... there must be a configuration file defined.", section ); } //Validate the document using a schema XmlValidatingReader vreader = new XmlValidatingReader( new XmlTextReader( new StringReader( section.OuterXml ) ) ); // open stream on Resources; the XSD is set as an "embedded resource" so Resource can open a stream on it using (Stream xsdFile = XYZ.GetStream("ABC.xsd")) using (StreamReader sr = new StreamReader(xsdFile)) { vreader.ValidationEventHandler += new ValidationEventHandler(ValidationCallBack); vreader.Schemas.Add(XmlSchema.Read(new XmlTextReader(sr), null)); vreader.ValidationType = ValidationType.Schema; // Validate the document while (vreader.Read()) { } if (!_isValidDocument) { _schemaErrors = _sb.ToString(); throw new ConfigurationException("XML Document not valid"); } } } // Does not cause warnings. private void ValidationCallBack( object sender, ValidationEventArgs args ) { // check what KIND of problem the schema validation reader has; // on FX 1.0, it gives a warning for "<xs:any...skip" sections. Don't worry about those, only set validation false // for real errors if( args.Severity == XmlSeverityType.Error ) { _isValidDocument = false; _sb.Append( args.Message + Environment.NewLine ); } }

    Read the article

  • Call 32-bit or 64-bit program from bootloader

    - by user1002358
    There seems to be quite a lot of identical information on the Internet about writing the following 3 bootloaders: Infinite loop jmp $ Print a single character Print "Hello World". This is fantastic, and I've gone through these 3 variations with very little trouble. I'd like to write some 32- or 64-bit code in C and compile it, and call that code from the bootloader... basically a bootloader that, for example, sets the computer up to run some simple numerical simulation. I'll start by listing primes, for example, and then maybe some input/output from the user to maybe compute a Fourier transform. I don't know. I haven't found any information on how to do this, but I can already foresee some problems before I even begin. First of all, compiling a C program compiles it into one of several different files, depending on the target. For Windows, it's a PE file. For Linux, it's a .out file. These files are both quite different. In my instance, the target isn't Windows or Linux, it's just whatever I have written in the bootloader. Secondly, where would the actual code reside? The bootloader is exactly 512 bytes, but the program I write in C will certainly compile to something much larger. It will need to sit on my (virtual) hard disk, probably in some sort of file system (which I haven't even defined!) and I will need to load the information from this file into memory before I can even think about executing it. But from my understanding, all this is many, many orders of magnitude more complex than a 12-line "Hello World" bootloader. So my question is: How do I call a large 32- or 64-bit program (written in C/C++) from my 16-bit bootloader.

    Read the article

  • How to reset keyboard for an entry field?

    - by David.Chu.ca
    I am using tag field as a flag for text fields text view fields for auto-jumping to the next field: - (BOOL)findNextEntryFieldAsResponder:(UIControl *)field { BOOL retVal = NO; for (UIView* aView in mEntryFields) { if (aView.tag == (field.tag + 1)) { [aView becomeFirstResponder]; retVal = YES; break; } } return retVal; } It works fine in terms of auto-jumping to the next field when Next key is pressed. However, my case is that the keyboards are different some fields. For example, one fields is numeric & punctuation, and the next one is default (alphabetic keys). For the numeric & punctuation keyboard is OK, but the next field will stay as the same layout. It requires user to press 123 to go back ABC keyboard. I am not sure if there is any way to reset the keyboard for a field as its keyboard defined in xib? Not sure if there is any APIs available? I guess I have to do something is the following delegate? -(void)textFieldDidBegingEditing:(UITextField*) textField { // reset to the keyboard to request specific keyboard view? .... } OK. I found a solution close to my case by slatvik: -(void) textFieldDidBeginEditing:(UITextField*) textField { textField.keyboardType = UIKeybardTypeAlphabet; } However, in the case of the previous text fields is numeric, the keyboard stays numeric when auto-jumped to the next field. Is there any way to set keyboard to alphabet mode?

    Read the article

  • jQuery : how to determine that a div is scrolled down

    - by subtenante
    I have a div with defined height, and overflow:scroll;. Its content is too long so scrollbars appear. Now for the ichy part. Some of its inner HTML strangely appears all the time (to be precise, the footer of a table generated by the tableFilter plugin). I'd like to make this footer disappear when it is not needed (it actually appears out of the containing <div>'s border). I resolved to make it disappear but setting its z-index to -1000. But I want to make it appear when the containing <div> is totally scrolled down. How can I know the user has scrolled at the bottom ? Using the help from answers below, I used scrollTop attribute but the difference between scrollTop and innerHeight is the size of the scrollbar plus some unidentified delta. A scrollbar is 16 pixels high in most browsers under Windows, but I get a difference of 17 in Firefox and something like 20 in IE, where my <div> content's borders seems to be rendered bigger. A way (actually two ways...) to compute the scrollbar size has been given there.

    Read the article

  • C++ STL question related to insert iterators and overloaded operators

    - by rshepherd
    #include <list> #include <set> #include <iterator> #include <algorithm> using namespace std; class MyContainer { public: string value; MyContainer& operator=(const string& s) { this->value = s; return *this; } }; int main() { list<string> strings; strings.push_back("0"); strings.push_back("1"); strings.push_back("2"); set<MyContainer> containers; copy(strings.begin(), strings.end(), inserter(containers, containers.end())); } The preceeding code does not compile. In standard C++ fashion the error output is verbose and difficult to understand. The key part seems to be this... /usr/include/c++/4.4/bits/stl_algobase.h:313: error: no match for ‘operator=’ in ‘__result.std::insert_iterator::operator* [with _Container = std::set, std::allocator ]() = __first.std::_List_iterator::operator* [with _Tp = std::basic_string, std::allocator ]()’ ...which I interpet to mean that the assignment operator needed is not defined. I took a look at the source code for insert_iterator and noted that it has overloaded the assignment operator. The copy algorithm must uses the insert iterators overloaded assignment operator to do its work(?). I guess that because my input iterator is on a container of strings and my output iterator is on a container of MyContainers that the overloaded insert_iterator assignment operator can no longer work. This is my best guess, but I am probably wrong. So, why exactly does this not work and how can I accomplish what I am trying to do?

    Read the article

  • SEO Problem for new dictionary site, google hasn't indexed content.

    - by John
    I loaded about 15,000 pages, letters A & B of a dictionary and submitted to google a text site map. I'm using google's search with advertisement as the planned mechanism to go through my site. Google's webmaster accepted the site mapps as good but then did not index. My index page has been indexed by google and at this point have not linked to any pages. So to get google's search to work I need to get all my content indexed. It appears google will not just index from the site map and so I was thinking of adding pages that spider in links from the main index page. But I don't want to create a bunch of pages that programicly link all of the pages without knowing if this has a chance to work. Eventually I plan on having about 150,000 pages each page being a word or phrase being defined. I wrote a program that is pulling this from a dictionary database. I would like to prove the content that I have to anyone interested to show the value of the dictionary in releation to the dictionary software that I'm completing. Suggestions for getting the entire site indexed by google so I can appear in the search results? Thanks

    Read the article

  • Read in double type from txt file - C++

    - by Greenhouse Gases
    Hi there I'm in the midst of a university project and have decided to implement a method that can accept information from a text file (in this instance called "locations.txt"). input from the text file will look like this: London 345 456 Madrid 234 345 Beinjing 345 456 Frankfurt 456 567 The function looks like this currently (and you will notice I am missing the While condition to finish adding input when reaches end of text in locations.txt, i tried using eof but this didnt work?!). Also get function expects a char and so cant accept input thats a double which is what the latitude and longitude are defined as... void populateList(){ ifstream inputFile; inputFile.open ("locations.txt"); temp = new locationNode; // declare the space for a pointer item and assign a temporary pointer to it while(HASNT REACHED END OF TEXT FILE!!) { inputFile.getline(temp-nodeCityName, MAX_LENGTH); // inputFile.get(temp-nodeLati, MAX_LENGTH); // inputFile.get(temp-nodeLongi, MAX_LENGTH); temp-Next = NULL; //set to NULL as when one is added it is currently the last in the list and so can not point to the next if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2-Next != NULL) { temp2 = temp2-Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } } inputFile.close(); } Any help you can provide would be most useful. If I need to provide anymore detail I will do, I'm in a bustling canteen atm and concentrating is hard!!

    Read the article

  • "error: Expected a type, got 'classname'" in C++

    - by Bay
    Using the following code: template <typename T> class node { [. . .] }; class b_graph { friend istream& operator>> (istream& in, b_graph& ingraph); friend ostream& operator<< (ostream& out, b_graph& outgraph); public: [...] private: vector<node> vertices; //This line I'm getting: error: type/value mismatch at argument 1 in template parameter list for ‘template<class _Tp, class _Alloc> class std::vector’ error: expected a type, got 'node' error: template argument 2 is invalid On the indicated line. Node is clearly defined before b_graph which uses it - what have I done here?

    Read the article

  • Ways to make (relatively) safe assumptions about the type of concrete subclasses?

    - by Kylotan
    I have an interface (defined as a abstract base class) that looks like this: class AbstractInterface { public: bool IsRelatedTo(const AbstractInterface& other) const = 0; } And I have an implementation of this (constructors etc omitted): class ConcreteThing { public: bool IsRelatedTo(const AbstractInterface& other) const { return m_ImplObject.has_relationship_to(other.m_ImplObject); } private: ImplementationObject m_ImplObject; } The AbstractInterface forms an interface in Project A, and the ConcreteThing lives in Project B as an implementation of that interface. This is so that code in Project A can access data from Project B without having a direct dependency on it - Project B just has to implement the correct interface. Obviously the line in the body of the IsRelatedTo function cannot compile - that instance of ConcreteThing has an m_ImplObject member, but it can't assume that all AbstractInterfaces do, including the other argument. In my system, I can actually assume that all implementations of AbstractInterface are instances of ConcreteThing (or subclasses thereof), but I'd prefer not to be casting the object to the concrete type in order to get at the private member, or encoding that assumption in a way that will crash without a diagnostic later if this assumption ceases to hold true. I cannot modify ImplementationObject, but I can modify AbstractInterface and ConcreteThing. I also cannot use the standard RTTI mechanism for checking a type prior to casting, or use dynamic_cast for a similar purpose. I have a feeling that I might be able to overload IsRelatedTo with a ConcreteThing argument, but I'm not sure how to call it via the base IsRelatedTo(AbstractInterface) method. It wouldn't get called automatically as it's not a strict reimplementation of that method. Is there a pattern for doing what I want here, allowing me to implement the IsRelatedTo function via ImplementationObject::has_relationship_to(ImplementationObject), without risky casts? (Also, I couldn't think of a good question title - please change it if you have a better one.)

    Read the article

  • Should I put actors in the Domain-Model/Class-Diagram?

    - by devoured elysium
    When designing both the domain-model and class-diagrams I am having some trouble understanding what to put in them. I'll give an example of what I mean: I am doing a vacations scheduler program, that has an Administrator and End-Users. The Administrator does a couple of things like registering End-Users in the program, changing their previleges, etc. The End-User can choose his vacations days, etc. I initially defined an Administrator and End-User as concepts in the domain-model, and later as classes in the class-diagram. In the class-diagram, both classes ended up having a couple of methods like Administrator.RegisterNewUser(); Administrator.UnregisterUser(int id); etc. Only after some time I realised that actually both Administrator and End-User are actors, and maybe I got this design totally wrong. Instead of filling Administrator and End-User classes with methods to do what my Use-Cases request, I could define other classes from the domain to do them, and have controllers handle the Use-Cases(actually, I decided to do one for each Use-Case). I could have a UserDatabase.RegisterNewUser() and UserDatabase.UnregisterUser(int id);, for example, instead of having those methods on the Administrator class. The idea would be to try to think of the whole vacation-scheduler as a "closed-program" that has a set of features and doesn't bother with things such as authentication, that should be internal/protected, being that the only public things I'd let the outside world see would be its controllers. Is this the right approach? Or am I getting this totally wrong? Is it generally bad idea to put Actors in the domain-model/class-diagrams? What are good rules of thumb for this? My lecturer is following Applying UML and Patterns, which I find awful, so I'd like to know where I could look up more info on this described actor-models situation. I'm still a bit confused about all of this, as this new approach is radically different from anything I've done before.

    Read the article

  • HTML Table: How to resize data cells when already specified "colspan"?

    - by Jenny
    I have tabular data to display, which has a meaning to both rows and columns. Columns are time blocks, rows are days. A particular datacell is confined to a single day, but can be in multiple time block. To show this, I am using the colspan tag. <div id = "GuideTable"> <table> <tr> <td colspan = 3> </td></tr></table> </div> Or Whatever. I'm trying to apply CSS formating to the entire table, and for changing colors, etc, things are fine, but wanting to have a consistent width is where I am running into problems. Right now, each data cell's width seems tied to the maximum width in its column (everything auto lines up). Some columns are itty bitty, others are huge. I'm trying to make columns consistently sized (even if that means every column is as big as the biggest column needs to be), but setting an individual datacells width (either via css or in the tag itself) is getting me nowhere. I'm thinking maybe the colspan tag is overriding my manual width? If that's the case, how can I change the width of a column as a whole, especially since they aren't explicitly defined? (CAN you explicitly define columns?) Examples of the CSS I'm using: #GuideTable td{ background:#ffffff; border-style: solid; border-width: 1px; width: 100px; }

    Read the article

  • understanding and implementing Boids

    - by alphablender
    So I'm working on porting Boids to Brightscript, based on the pseudocode here: http://www.kfish.org/boids/pseudocode.html I'm trying to understand the data structures involved, for example is Velocity a single value, or is it a 3D value, ie velocity={x,y,z} It seems as if the pseudocode seems to mix this up where sometimes it has an equation that incudes both vectors and single-value items: v1 = rule1(b) v2 = rule2(b) v3 = rule3(b) b.velocity = b.velocity + v1 + v2 + v3 If Velocity is a tripartite value then this would make sense, but I'm not sure. So my first question here is, is this the correct datastructure for a single boid based on the Pseudocode on that page: boid={position:{px:0,py:0,pz:0},velocity:{x:0,y:0,z:0},vector:{x:0,y:0,z:0},pc:{x:0,y:0,z:0},pv:{x:0,y:0,z:0}) where pc=perceived center, pv= perceived velocity I"ve implemented a vector_add, vector_sub, vector_div, and vector boolean functions. The reason I'm starting from this pseudocode is I've not been able to find anything else that is as readable, but it still leaves me with lots of questions as the data structures are not explicitly defined for each variable. (edit) here's a good example of what i'm talking about: IF |b.position - bJ.position| < 100 THEN if b.position - b[j].position are both 3D coordinates, how can they be considered "less than 100" unless they are < {100,100,100} ? Maybe that is what I need to do here, use a vector comparison function?

    Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >