Search Results

Search found 33182 results on 1328 pages for 'linux port'.

Page 272/1328 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

  • Help with Ubuntu and Windows, separate HDs

    - by LuxuryMode
    Need some major help. Running a Dell XPS/Dimension 630i. It came with "SATA 2 RAID 0 With Dual 500GB Hard Drives." I have installed a new, third non-raided drive and installed Ubuntu on it. So now I have Windows on the original hard drive and Ubuntu Linux on the new HD. When I get to the boot menu where I can select an OS, if I select windows I get an error: "No such drive, no such disk." Also, strangely in the first place, in order to even get to the bootloader menu I have had to disable ALL ports under the RAID config. Unless I do this, I will just get to a never-ending blinking cursor. I have tried every conceivable CMOS config and nothing else works. Tried setting port 3 (the new HD w/ Ubuntu) to first hard disk boot priority. Tried disabling all other ports and enabling the Ubuntu HD port and vice versa. I have some pictures of boot up: first one is strange error i get after messing with CMOS to finally get ubuntu install to work. http://imgur.com/5sqJa then boot menu: http://imgur.com/TWtLq then error: http://imgur.com/TJ1mS. Also, please note that I can actually access all files from the raided Windows drive through Ubuntu.

    Read the article

  • Lighttpd mod_accesslog not logging fastcgi requests

    - by zepatou
    I have recently installed a lighttpd for serving a python script via mod_fastcgi. Everything works fine except that I don't get the requests handled by mod_fastcgi logged in the access.log file (requests on port 80 are logged though). My lighttpd version is 1.4.28 on a Debian 6.0. I used the same working configuration a Ubuntu server 10.04 with lighttpd 1.4.26 and it worked. Here is my config lighttpd.conf server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_compress", ) server.document-root = "/var/www/" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/home/log/lighttpd/error.log" index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", "index.lighttpd.html" ) accesslog.filename = "/home/log/lighttpd/access.log" url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) server.pid-file = "/var/run/lighttpd.pid" include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" conf-enabled/10-fastcgi.conf server.modules += ( "mod_fastcgi" ) fastcgi.server = ( "/" => ( ( "min-procs" => 1, "check-local" => "disable", "host" => "127.0.0.1", # local "port" => 3000 ), ) ) Any idea ?

    Read the article

  • Route return traffic to correct gateway depending on service

    - by Marnix van Valen
    On my office network I have two internet connections and one CentOS server running a website (HTTPS on port 443). The website should be publicly accessible through the public IP of the first internet connection (ISP-1). The other internet connection, ISP-2, id the default gateway on the network. Both internet connections have routers (the household-kind) with NAT, SPI firewalls etc. The router on ISP-2 is a Netgear WNDR3700 (aka N600) with original firmware. The problem is that the website is unreachable. Looks like incoming traffic on ISP-1 will reach the server but the returning traffic is routed through ISP-2, effectively making the site unreachable. As far as I can tell I can't do port based routing on the WNDR3700. What are my options to make this work? I've been looking at implementing an iptables / routing based solution on the server itself but haven't been able to make that work. Update: Note that the server has one network interface connecting it to both routers.

    Read the article

  • Plesk FTP not working but SFTP and Shell is working

    - by shamittomar
    I am facing a strange problem. The FTP on my Plesk VPS is not working. Whenever I try to connect, FileZilla FTP client says: Status: Resolving address of xxxxxxxxxxxxx.com Status: Connecting to xxx.xxx.xxx.xxx:21... Status: Connection established, waiting for welcome message... Error: Could not connect to server So, it's not even going to the step of asking username/password. So, it's something else. The SFTP on port 22 is working fine. Also, I can successfully do shell access and run commands. But, I NEED FTP access too on port 21. I have searched everywhere but can not find any setting to enable it. This is the Plesk version info: Parallels Plesk Panel version 9.5.2 Operating system Linux 2.6.26.8-57.fc8 CPU GenuineIntel, Intel(R) Pentium(R) 4 CPU 3.00GHz Any help is appreciated. [EDIT]: The firewall is not blocking it. I have checked it on server and there are absolutely no blocking rule. Firewall states: All incoming/outgoing connections are accepted on FTP And on client-side (my PC), I can connect to other FTP servers so this is not an issue in my PC's firewall. Moreover, I can not even connect to the FTP from online FTP clients like net2ftp.

    Read the article

  • Adjust iptables

    - by madunix
    cat /etc/sysconfig/iptables: # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d X.0.0.Y -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp -s X.Y.Z.W --dport 3306 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp -s M.M.M.M --dport 3306 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT I have the above following IPtables on my linux web server(Apache/MySQL), I want to have the following: Block any traffic from multiple IP's to my web server IP1:1.2.3.4.5, IP2:6.7.8.9 ..etc Limiting one host to 20 connections to 80 port, which should not affect non-malicious user, but would render slowloris unusable from one host. Limit MYSQL port 3306 access on my server only to the following IP range A.B.C.D/255.255.255.240 Block any ICMP traffic.

    Read the article

  • Apache Virtual Hosts behind Cisco Router

    - by Theo
    I'm setting up an Apache 2.2 Ubuntu web server for internal services that is also supposed to be accessed from outside our LAN. Our LAN has a single external IP that is the external IP of our RV042 Cisco router. We have set up several A records on our external DNS server that point to this IP. Our internal DNS server resolve the same records to the internal IP of our web server, so computers from inside the network can access them using the same address as if they were outside. We forwarded the router's external 80 port to our web server's 80 port. I have set up one Virtual Host for each domain name in our list, and my httpd.conf is something like this: ServerName web.domain.com NameVirtualHost *:80 <VirtualHost *:80> ServerName alfresco.domain.com <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /alfresco http://localhost:8080/alfresco ProxyPassReverse /alfresco http://localhost:8080/alfresco ProxyPass /share http://localhost:8080/share ProxyPassReverse /share http://localhost:8080/share </VirtualHost> <VirtualHost *:80> ServerName crm.domain.com DocumentRoot /var/www/sugarcrm </VirtualHost> Now, this works if we are in our LAN. However, if we are outside of our LAN we reach our web server's default page saying: It Works! This is the default web page for this server. But we can't reach the virtual hosts, as if the domain name is not being preserved when the router forward the packets to the web server. Am I doing something wrong? How can I check what is going on? What should be the settings to make this work from outside?

    Read the article

  • LVS / IPVS difference in ActiveConn since upgrading

    - by Hans
    I've recently migrated from an old version of LVS / ldirectord (Ultra Monkey) to a new Debian install with ldirectord. Now the amount of Active Connections is usually higher than the amount of Inactive Connections, it used to be the other way around. Basically on the old load balancer the connections looked something like: -> RemoteAddress:Port Forward Weight ActiveConn InActConn -> 10.84.32.21:0 Masq 1 12 252 -> 10.84.32.22:0 Masq 1 18 368 However since migrating it to the new load balancer it looks more like: -> RemoteAddress:Port Forward Weight ActiveConn InActConn -> 10.84.32.21:0 Masq 1 313 141 -> 10.84.32.22:0 Masq 1 276 183 Old load balancer: Debian 3.1 ipvsadm 1.24 ldirectord 1.2.3 New load balancer: Debian 6.0.5 ipvsadm 1.25 ldirectord 1.0.3 (I guess the versioning system changed) Is it because the old load balancer was running a kernel from 2005, and ldirectord from 2004, and things have simply changed in the past 7 - 8 years? Did I miss some sysctl settings that I should be enforcing for it to behave in the same way? Everything appears to be working fine but can anyone see an issue with this behaviour? Thanks in advance! Additional info: I'm using LVS in masquerading mode, the real servers have the load balancer as their gateway. The real servers are running Apache, which hasn't changed during the upgrade. The boxes themselves show roughly the same amount of Inactive Connections shown in ipvsadm.

    Read the article

  • What Logs / Process Stats to monitor on a Ubuntu FTP server?

    - by Adam Salkin
    I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

    Read the article

  • disable specific PCI device at boot

    - by Rhymoid
    I've just reinstalled Debian on my Sony VAIO laptop, and my dmesg and virtual consoles all get spammed with the same messages over and over again. [ 59.662381] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 59.901732] usb 1-1.2: new high-speed USB device number 91 using ehci_hcd [ 59.917940] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 60.157256] usb 1-1.2: new high-speed USB device number 92 using ehci_hcd I believe these messages are coming from an internally connected USB device, most likely the webcam (since that's the only thing that doesn't work). The only way I can seem to have it shut up (without killing my actually useful USB ports) is to disable one of the USB host controllers: # echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci_hcd/unbind This also takes down my Bluetooth interface, but I'm fine with that. I would like this setting to persist, so that I can painlessly use my virtual console again in case I need it. I want my operating system (Debian amd64) to never wake it up, but I don't know how to do this. I've tried to blacklist the module alias for the PCI device, but it seems to be ignored: $ cat /sys/bus/pci/devices/0000\:00\:1a.0/modalias pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 $ cat /etc/modprobe.d/blacklist blacklist pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 How do I ensure that this specific PCI device is never automatically activated, without disabling its driver altogether? -edit- The module was renamed recently, now the following works from userland: echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci-pci/unbind Still, I'm looking for a way to stop the kernel from binding that device in the first place.

    Read the article

  • Allow SFTP in iptables

    - by Kevin Orriss
    I have just purchased a VPS from linode and am going through the setup guide. I have everything running (apache2, php, mysql etc) but I am being denied access via SFTP when using fileZilla to upload a file. Now this is my second time installing the server as I missed a section out the first time. I was able to connect to my server through SFTP on filezilla the first time and the thing I missed out was adding a new user and editing the iptables in the firewall. So it would seem that the guide I have been following has blocked SFTP but allowed SSH. Here is the iptables file: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP and HTTPS connections from anywhere (the normal ports for websites and SSL). -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allow SSH connections # # The -dport number should be the same port number you set in sshd_config # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT All I would like is a line I need to put in there which allows SFTP over port 22. Thank you for reading this.

    Read the article

  • iptables, forward traffic for ip not active on the host itself

    - by gucki
    I have kvm guest which's netword card is conntected to the host using a tap device. The tap device is part of a bridge on the host together with eth0 so it can access the public network. So far everything works, the guest can access the public network and it can be accessed from the public network. Now the kvm process on the host provides a vnc server for the guest which listens on 127.0.0.1:5901 on the host. Is there any way to make this vnc server accessible by the ip address which the guest is using (ex. 192.168.0.249), without interrupting the guest from using the same ip (port 5901 is not used by the guest)? It should also work when the guest is not using any ip address at all. So basically I just want to fake IP xx is on the host and only answer/ forward traffic to port 5901 to the host itself. I tried using this NAT rule on the host, but it doesn't work. Ip forwarding is enabled at the host. iptables -t nat -A PREROUTING -p tcp --dst 192.168.0.249 --dport 5901 -j DNAT --to-destination 127.0.0.1:5901 I assume this is because the IP 192.168.0.249 is not not bound to any interfaces and so no ARP requests for it get answered and so no packets for this IP arrive at the host. How can make it work? :)

    Read the article

  • Routing Traffic With OpenVPN

    - by user224277
    Few minutes ago i configured my VPN server, and actually I can connect to my VPN but all trafic is going through my normal home network. On my OpenVPN application I've got an information : Server IP: **.185.***.*10 Client IP: 10.8.0.6 Traffic: 7.3 KB in, 5.6 KB out Connected: 10 June 2014 19:21:59 So everything is connected but how I can setup on windows 7 that all trafic have to go through OpenVPN network card ?? Client setting : client dev tun proto udp # enter the server's hostname # or IP address here, and port number remote **.185.***.*10 1194 resolv-retry infinite nobind persist-key persist-tun # Use the full filepaths to your # certificates and keys ca ca.crt cert user1.crt key user1.key ns-cert-type server comp-lzo verb 6 Server setting : port 1194 proto udp dev tun # the full paths to your server keys and certs ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh2048.pem cipher BF-CBC # Set server mode, and define a virtual pool of IP # addresses for clients to use. Use any subnet # that does not collide with your existing subnets. # In this example, the server can be pinged at 10.8.0.1 server 10.8.0.0 255.255.255.0 # Set up route(s) to subnet(s) behind # OpenVPN server push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" ifconfig-pool-persist /etc/openvpn/ipp.txt keepalive 10 120 status openvpn-status.log verb 6 and sysctl : net.ipv4.ip_forward=1 Thank you for your time and help.

    Read the article

  • Passive mode FTP file download hangs from specific machine

    - by chiptuned
    I have a server which is an AWS instance that just cannot download files from a specific FTP server. I can connect to the FTP server fine and run some commands, but when I request a file it just hangs. Here is the debug output of the base linux ftp client after login: ---> SYST 215 UNIX Type: Apache FtpServer Remote system type is UNIX. ftp> get outgoing/catalog.gz catalog.gz local: catalog.gz remote: outgoing/catalog.gz ---> PASV 227 Entering Passive Mode (64,156,167,125,135,191) ---> RETR outgoing/catalog.gz 150 File status okay; about to open data connection. Thats it. Then it just sits there and nothing transfers. I have verified that a data connection is made but the client gets no data. ? ss -nt dst 64.156.167.125 State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 0 10.185.147.150:41190 64.156.167.125:21 ESTAB 0 0 10.185.147.150:48871 64.156.167.125:48557 The FTP server is not in my control and downloads from other FTP servers in passive mode have worked. Active mode does not work as the system is behind a firewall. Every FTP client I've tried has the same problem. The download works from other systems, even from other AWS instances I have with the same Security Group. Not necessarily the same distro or config though. I understand it may be some issue on the server side, but I want to know what it is about my particular machine where the transfer hangs and where on every other machine I can get my hands on, it works. Please let me know what the culprit on the client side could be or ideas on what else to look at.

    Read the article

  • What Logs / Process Stats to monitor on a Ubuntu FTP server?

    - by Adam Salkin
    I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

    Read the article

  • My Ubuntu 10.04 server kills all WAN bandwidth when it's attached to my LAN. Where do you begin troubleshooting?

    - by rrc7cz
    First I should say that my Linux knowledge is minimal; just enough to set up some servers (Apache, Tomcat, Couch, etc). I built a MiniITX server to host some simple sites, act as an SSH tunnel while I'm away, and act as a torrent server. It was not properly secured for a long time (iptables was empty, all ports open, no firewall) though my router did not have much port forwarding set up beyond HTTP, FTP, and SSH. A week or two ago my bandwidth at home dropped from around 27Mbps to 2Mbps and my upload went from 7Mbps to 0.06Mbps. When I unplug the server from the LAN, by bandwidth shoots back up. I threw up a restrictive iptables, removed most of the port forwarding, and checked my router logs to see if there were any open connections from the server (malware?) but there were none. What would you do? What are the first things you'd check? I can of course reinstall everything from scratch, but I'd like to find the root cause.

    Read the article

  • Iptables state tracking

    - by complexgeek
    Hi there. I've just taken over administration of a fairly complex firewall ruleset for a firewall box running Fedora Core 12, and there's one thing about it that is puzzling me. When I run nmap on the gateway from outside the network, I see all the expected services, but also sunrpc on port 111. The INPUT chain has DEFAULT DROP set, and there is no rule allowing port 111. As best I can tell (watching the packet counters before/during/after the scan) it's being allowed by the rule: "-m state --state RELATED,ESTABLISHED -j ACCEPT" but I don't understand why a brand new TCP connection would be considered RELATED or ESTABLISHED. Any suggestions would be greatly appreciated. EDIT: Conntrack modules: nf_conntrack_netlink 14925 0 nfnetlink 3479 1 nf_conntrack_netlink nf_conntrack_irc 5206 1 nf_nat_irc nf_conntrack_proto_udplite 3138 0 nf_conntrack_h323 62110 1 nf_nat_h323 nf_conntrack_proto_dccp 6878 0 nf_conntrack_sip 16921 1 nf_nat_sip nf_conntrack_proto_sctp 11131 0 nf_conntrack_pptp 10673 1 nf_nat_pptp nf_conntrack_sane 5458 0 nf_conntrack_proto_gre 6574 1 nf_conntrack_pptp nf_conntrack_amanda 2796 1 nf_nat_amanda nf_conntrack_ftp 11741 1 nf_nat_ftp nf_conntrack_tftp 4665 1 nf_nat_tftp nf_conntrack_netbios_ns 1534 0 nf_conntrack_ipv6 18504 2 ipv6 279399 40 ip6t_REJECT,nf_conntrack_ipv6 INPUT chain on the filter table: -A INPUT -s 192.168.200.10/32 -p tcp -m tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -s 127.0.0.0/8 -i lo -j ACCEPT -A INPUT -p udp -m udp --sport 67:68 --dport 67:68 -j ACCEPT -A INPUT -d 192.168.200.5/32 -i eth0 -j ACCEPT -A INPUT -d 192.168.1.2/32 -i eth0 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --dports 22,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --sports 22,25,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --sport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m multiport --sports 53,123 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -i eth0 -m state --state NEW -j ACCEPT -A INPUT -d {public_ip}/32 -m state --state NEW -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT eth0 is connected to the internal network, eth3 is connected to an ADSL modem in bridge mode, ppp0 is the WAN connection tunneled over eth3.

    Read the article

  • ufw portforwarding to virtualbox guest

    - by user85116
    My goal is to be able to connect using remote desktop on my desktop machine, to windows xp running in virtualbox on my linux server. My setup: server = debian squeeze, 64 bit, with a public IP address (host) virtualbox-ose 3.2.10 (from debian repo) windows xp running inside VBox as a guest; bridged networking mode in VBox, ip = 192.168.1.100 ufw as the firewall on debian, 3 ports are opened: 22 / ssh, 80 / apache, and 3389 for remote desktop My problem: If I try to use remote desktop on my home computer, I am unable to connect to the windows guest. If I first "ssh -X -C" into the debian server, then run "rdesktop 192.168.1.100", I am able to connect without issue. The windows firewall was configured to allow remote desktop connections, and I've even turned it off (as it is redundant here) to see if that was the problem but it made no difference. Since I am able to connect from inside the local subnet, I suspect that I have not setup my debian firewall correctly to handle connections from outside the LAN. Here is what I've done... First my ufw status: ufw status Status: active To Action From -- ------ ---- 22 ALLOW Anywhere 80 ALLOW Anywhere 3389 ALLOW Anywhere I edited /etc/ufw/sysctl.conf and added: net/ipv4/ip_forward=1 Edited /etc/default/ufw and added: DEFAULT_FORWARD_POLICY="ACCEPT" Edited /etc/ufw/before.rules and added: # setup port forwarding to forward rdp to windows VM *nat :PREROUTING - [0:0] -A PREROUTING -i eth0 -p tcp --dport 3389 -j DNAT --to-destination 192.168.1.100 -A PREROUTING -i eth0 -p udp --dport 3389 -j DNAT --to-destination 192.168.1.100 COMMIT # Don't delete these required lines, otherwise there will be errors *filter <snip> Restarted the firewall etc., but no connection. My log files on the debian host show this (my public ip address was removed for this posting but it is correct in the actual log): Feb 6 11:11:21 localhost kernel: [171991.856941] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27518 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:21 localhost kernel: [171991.856963] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27518 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:24 localhost kernel: [171994.856701] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27519 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:24 localhost kernel: [171994.856723] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27519 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:30 localhost kernel: [172000.856656] [UFW AUDIT] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27520 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Feb 6 11:11:30 localhost kernel: [172000.856678] [UFW ALLOW] IN=eth0 OUT=eth0 SRC=aaa.bbb.ccc.dd DST=192.168.1.100 LEN=60 TOS=0x00 PREC=0x00 TTL=45 ID=27520 DF PROTO=TCP SPT=54201 DPT=3389 WINDOW=5840 RES=0x00 SYN URGP=0 Although this is the current setup / configuration, I've also tried several variations of this; I thought maybe the ISP would be blocking 3389 for some reason and tried using different ports, but again there was no connection. Any ideas...? Did I forget to modify some file somewhere?

    Read the article

  • Fortinet SSL VPN Client Setup Without GUI on Linux (centos)

    - by Calua
    How can I install and setup a fortinet SSL VPN client on a VPS that's running on Centos? I have problem to do it because all guide I have are all using GUI which is not installed on the VPS to save resource. (example: http://dbssolutions.freshdesk.com/solution/categories/1513/folders/3047/articles/1791-how-to-install-the-linux-fortinet-ssl-vpn-client) I already have the linux version for the vpn client but not sure how to install and configure it only using the terminal.

    Read the article

  • Swap implication in Linux and way to increase it

    - by vimalnath
    I used top command to print this on Linux box: [root@localhost ~]# top top - 23:38:38 up 361 days, 12:16, 2 users, load average: 0.09, 0.06, 0.01 Tasks: 129 total, 2 running, 126 sleeping, 1 stopped, 0 zombie Cpu(s): 0.0% us, 0.2% sy, 0.0% ni, 96.5% id, 3.4% wa, 0.0% hi, 0.0% si Mem: 2074712k total, 1996948k used, 77764k free, 16632k buffers Swap: 1052248k total, 1052248k used, 0k free, 331540k cached I am not sure what Swap:0k free means in the last line. Is this normal behavior for a linux box to have value of 0 Thanks

    Read the article

  • not able to register sip user on red5server, using red5phone

    - by sunil221
    I start the red5, and then i start red5phone i try to register sip user , details i provide are username = 999999 password = **** ip = asteriskserverip and i got --- Registering contact -- sip:[email protected]:5072 the right contact could be --- sip :99999@asteriskserverip this is the log: SipUserAgent - listen -> Init... Red5SIP register [SIPUser] register RegisterAgent: Registering contact <sip:[email protected]:5072> (it expires in 3600 secs) RegisterAgent: Registration failure: No response from server. [SIPUser] SIP Registration failure Timeout RegisterAgent: Failed Registration stop try. Red5SIP Client leaving app 1 Red5SIP Client closing client 35C1B495-E084-1651-0C40-559437CAC7E1 Release ports: sip port 5072 audio port 3002 Release port number:5072 Release port number:3002 [SIPUser] close1 [SIPUser] hangup [SIPUser] closeStreams RTMPUser stopStream [SIPUser] unregister RegisterAgent: Unregistering contact <sip:[email protected]:5072> SipUserAgent - hangup -> Init... SipUserAgent - closeMediaApplication -> Init... [SIPUser] provider.halt RegisterAgent: Registration failure: No response from server. [SIPUser] SIP Registration failure Timeout please let me know if i am doing anything wrong. regards Sunil

    Read the article

  • Proper network configuration for a KVM guest to be on the same networks at the host

    - by Steve Madsen
    I am running a Debian Linux server on Lenny. Within it, I am running another Lenny instance using KVM. Both servers are externally available, with public IPs, as well as a second interface with private IPs for the LAN. Everything works fine, except the VM sees all network traffic as originating from the host server. I suspect this might have something to do with the iptables-based firewall I'm running on the host. What I'd like to figure out is: how to I properly configure the host's networking such that all of these requirements are met? Both host and VMs have 2 network interfaces (public and private). Both host and VMs can be independently firewalled. Ideally, VM traffic does not have to traverse the host firewall. VMs see real remote IP addresses, not the host's. Currently, the host's network interfaces are configured as bridges. eth0 and eth1 do not have IP addresses assigned to them, but br0 and br1 do. /etc/network/interfaces on the host: # The primary network interface auto br1 iface br1 inet static address 24.123.138.34 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 gateway 24.123.138.33 bridge_ports eth1 bridge_stp off auto br1:0 iface br1:0 inet static address 24.123.138.36 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 # Internal network auto br0 iface br0 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 bridge_ports eth0 bridge_stp off This is the libvirt/qemu configuration file for the VM: <domain type='kvm'> <name>apps</name> <uuid>636b6620-0949-bc88-3197-37153b88772e</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <disk type='file' device='disk'> <source file='/raid/kvm-images/apps.qcow2'/> <target dev='vda' bus='virtio'/> </disk> <interface type='bridge'> <mac address='54:52:00:27:5e:02'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='54:52:00:40:cc:7f'/> <source bridge='br1'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> </devices> </domain> Along with the rest of my firewall rules, the firewalling script includes this command to pass packets destined for a KVM guest: # Allow bridged packets to pass (for KVM guests). iptables -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT (Not applicable to this question, but a side-effect of my bridging configuration appears to be that I can't ever shut down cleanly. The kernel eventually tells me "unregister_netdevice: waiting for br1 to become free" and I have to hard reset the system. Maybe a sign I've done something dumb?)

    Read the article

  • Launching mysql server: same permissions for root and for user

    - by toinbis
    Hi folks, have been directed here from stackoverflow here, am reposting the question and adding my.cnf at the end of a post. so far in my 10+ years experience with linux, all the permission problems I've ever encountered, have been successfully solved with chmod -R 777 /path/where/the/problem/has/occured (every lie has a grain of truth in it :) This time the trick doesn't work, so I'm turning to you for help. I'm compiling mysql server from scratch with zc.buildout (www . buildout . org). I do launch it by executing /home/toinbis/.../parts/mysql/bin/mysqld_safe, this works. The thing is that i'll be launching this from within supervisor (supervisord . org) script, and when used on the deployment server, it'll need it to be launched with root permissions(so that nginx server, launched with the same script, would have access to 80 port). The problem is that sudo /home/toinbis/.../parts/mysql/bin/mysqld_safe, fails, generating the error, posted bellow, in mysql error log (apache and nginx works as expected). http://lists.mysql.com/mysql/216045 suggests, that "there are two errors: A missing table and a file system that mysqld doesn't have access to". Mysqldatadir and all the mysql server binary files has 777 permissions, talbe mysql.plugin does exist and has 777 permissions (why Can't open the mysql.plugin table?), "sudo touch mysql_datadir/tmp/file" does create file (why Can't create/write to file /home/toinbis/.../runtime/mysql_datadir/tmp/ib4e9Huz?). chgrp -R mysql mysql_datadir and adding "root, toinbis, mysql" users to mysql group ( cat /etc/group | grep mysql outputs mysql:x:124:root,toinbis,mysql) has no effect - when i launch it as a casual user, it starts, when as a root - it fails. Does mysql server, even started as root, tries to operate as other, let's say, 'mysql' user? but even in that case, adding mysql user to mysql group and making all the mysql_datadirs files belong to mysql group should make things work smoothly. I do know that it might be a better idea to simply to launch one the nginx as root and mysql - as just a user, but this error irritated me enough so to devote enough energy so not to only "make things work", but to also make things work exactly as i wanted it initially, so to have a proof of concept that it's possible. and this is the generated error: 091213 20:02:55 mysqld_safe Starting mysqld daemon with databases from /home/toinbis/.../runtime/mysql_datadir /home/toinbis/.../parts/mysql/libexec/mysqld: Table 'plugin' is read only 091213 20:02:55 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. /home/toinbis/.../parts/mysql/libexec/mysqld: Can't create/write to file '/home/toinbis/.../runtime/mysql_datadir/tmp/ib4e9Huz' (Errcode: 13) 091213 20:02:55 InnoDB: Error: unable to create temporary file; errno: 13 091213 20:02:55 [ERROR] Plugin 'InnoDB' init function returned error. 091213 20:02:55 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 091213 20:02:55 [ERROR] Can't start server : Bind on unix socket: Permission denied 091213 20:02:55 [ERROR] Do you already have another mysqld server running on socket: /home/toinbis/.../runtime/var/pids/mysql.sock ? 091213 20:02:55 [ERROR] Aborting 091213 20:02:55 [Note] /home/toinbis/.../parts/mysql/libexec/mysqld: Shutdown complete 091213 20:02:55 mysqld_safe mysqld from pid file /home/toinbis/.../runtime/var/pids/mysql.pid ended My my.cnf (the basedir and datadir(including tempdir) have chmod -R 777 permissions) : [client] socket = /home/toinbis/.../runtime/var/pids/mysql.sock port = 8002 [mysqld_safe] socket = /home/toinbis/.../runtime/var/pids/mysql.sock nice = 0 [mysqld] # # * Basic Settings # socket = /home/toinbis/.../runtime/var/pids/mysql.sock port = 8002 pid-file = /home/toinbis/.../runtime/var/pids/mysql.pid basedir = /home/toinbis/.../parts/mysql datadir = /home/toinbis/.../runtime/mysql_datadir tmpdir = /home/toinbis/.../runtime/mysql_datadir/tmp skip-external-locking bind-address = 127.0.0.1 log-error =/home/toinbis/.../runtime/logs/mysql_errorlog # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 32M thread_stack = 128K thread_cache_size = 8 myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /home/toinbis/.../runtime/logs/mysql_logs/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration #log_slow_queries = /home/toinbis/.../runtime/logs/mysql_logs/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 #log_bin = /home/toinbis/.../runtime/mysql_datadir/mysql-bin.log #binlog_format = ROW #read_only = 0 #expire_logs_days = 10 #max_binlog_size = 100M #sync_binlog = 1 #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # innodb_data_file_path = ibdata1:10M:autoextend innodb_buffer_pool_size=64M innodb_log_file_size=16M innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit=1 innodb_file_per_table innodb_locks_unsafe_for_binlog=1 [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completion [isamchk] key_buffer = 16M Any ideas much appreciated! regards, to P.S. sorry for messy hyperlinks, it's my first post and anti-spam feature of SF doesn't allow to post them properly :)

    Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >