Search Results

Search found 8755 results on 351 pages for 'triple boot'.

Page 272/351 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• How can I set the fan speed to 100% on a laptop?

  - by Codemonkey

  I recently purchased a HP Pavilion dv7-4031. When it's cool, it works smoothly and efficiently. However when CPU and GUP temperatures reach 60c and above, the PC starts freezing up and stuttering. I can hear that the fan speeds steadily increase all the way up to 70-80c. This is what pisses me off: I want the fan speeds to run 100% all the time, perhaps preventing the high temperatures in the first place. The way it is now, fan speeds only increase to keep internal temperatures at above 60c. I've searched all over for any sort of speed control, finding nothing. Any help appreciated. I have tried Speedfan. In "Fans" there is nothing listed. I took that as a bad sign. The BIOS is pathetic, and only has 4 or 5 changeable settings, including "Quickstart" and "Boot order"

  Read the article

• Preparing a new physical system with VMWare

  - by Max

  I need to create a new installation of Windows, but at the same time I need this computer. So I decided to create a new physical disk from within VMWare, install windows/drivers/software and then just replace the HDD in the computer. I've bought a new HDD, split it into two partions and installed Windows 7 using the VMWare's ability to use phusical disks. I can see the windows files and directories that have been created on this partition, but when I'm replacing the HDD in the host machine it cannot boot from it. Why is that? Is it at all possible to create a bootable physical disk with VMWare or I should create a virtual disk and then use some HDD imaging tool to copy the HDD image to a physical disk? Maybe there's a better way of installing a new system and working on the computer at the same time?

  Read the article

• Clonezilla-SE with another DHCP Server in LAN

  - by aleroot

  I want to install Clonezilla-Server(192.168.1.100) in a network that already have a DHCP Server (dd-wrt with dnsmasq - 192.168.1.1). I've installed Clonezilla-SE on ubuntu Server 10.10, once installed and configured Clonezilla Server i've removed the DHCP-Server and set pxe server address in dnsmasq configuration on DHCP Server : dhcp-boot=pxelinux.0,,192.168.1.100 When i try to start from PXE a Computer in the network clonezilla start, but give me an error that the ipddress of the machine is not given by the clonezilla server and can't continue ... Someone has already tried to configure Clonezilla-SE in a similar enviroment? Is there some configuration on DRBL server of Clonezilla that i need to do ?

  Read the article

• why my server has a dir named "?"

  - by liuxingruo

  These are all the dirs in my server: ? bin boot dev etc home lib lost+found media media2 misc mnt net opt proc root sbin selinux srv sys tmp usr var why there is a "?" dir? Thanks very much. BTW: the touch command was found on my server(wiered). I list the bin dir: alsacard cp dd env hostname loadkeys more ps sed tcptraceroute alsaunmute cpio df ex igawk loadkeys.static mount pwd setfont traceroute6 arch csh dmesg false ipcalc logger mountpoint raw setserial tracert awk cut dnsdomainname fgrep kbd_mode login mv red sh view basename date doexec gawk keyctl ls netstat redhat_lsb_init sleep ypdomainname bash dbus-cleanup-sockets domainname gettext kill mail nice rm sort cat dbus-daemon dumpkeys grep ksh mailx nisdomainname rmdir stty chgrp dbus-monitor echo gtar ksh93 mkdir pgawk rpm su chmod dbus-send ed gunzip link mknod ping rvi sync chown dbus-uuidgen egrep gzip ln mktemp ping6 rview tar touch is missing, how can i get it back?

  Read the article

• How to change XFCE to LXDE?

  - by kurp

  I've just installed LinuxMint XFCE, which seems to be still a bit to heavy for my hardware. Thus, I'm thinking about LXDE installation and wonder if a new Linux installation is necessary/advised in such case. The question is: how to switch easily? The additional questions are: a) is it necessary to remove the XFCE packages or both DEs may be installed at the same time? b) is there any way to simply switch between DEs (i.e. have both DEs available and boot with DE selected each time)? c) are there any performance consequences of having more than one DE installed? it means: is clean LXDE installation faster than Linux with 2 separate desktops?

  Read the article

• Is there way to scan a registry hive on an attached USB drive?

  - by johnny

  I have a hard drive with a virus that I removed from a PC. I can scan the file system of it as an attached USB drive. But how do I scan the registry of that USB drive since it is not booted up like a regular hard drive? Thank you EDIT: To clarify, the USB drive was a regular hard drive in a PC that got infected. I cannot boot into the OS to run a scan. I removed it to attach it to a working PC so I can scan its file system. But, I cannot scan the registry of that hard drive because that drive is not booted up. The hard drive was a regular XP hard drive install that I removed to scan as an attached drive (with an adapter to make it a USB drive.)

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• How do you add more space to a Fedora (LVM) partition?

  - by Trevor Boyd Smith

  In a nutshell, i have a VM that ran out of space. I increased the size of the VM's harddrive to be 4 times bigger but the OS partition is still only using 1x the space. I need to change the LVM partition to take up the extra 4x space but I don't know how to extend the LVM partition. (NOTE: To make the screenshots given below I had to boot from a live-cd for gnome-partition-manager (aka gparted). Very unfortunately gparted is only able to "detect LVM" and can't do any LVM operations.) Here is what "gparted" shows. Please notice that the "resize" option is not available: The Problem: I can't find good directions<1 on how to grow the LVM partition via GUI or command-line! How do you grow a LVM partition that was created by the default Fedora install? If you are giving command line directions. Please explain what each line of commands does.

  Read the article

• Does the advanced format tool bundled by manufacturers actually do anything which mkntfs doesn't?

  - by neurolysis

  I recently bought a new drive (specifically, a 2TB Samsung Spinpoint) that says on the label that it supports advanced format, and that I should download the tool from their site. Unless I'm missing something, mkntfs has always had its maximum sector size at 4096b: -s, --sector-size BYTES Specify the size of sectors in bytes. Valid sector size values are 256, 512, 1024, 2048 and 4096 bytes per sector. If omitted, mkntfs attempts to determine the sector-size automatically and if that fails a default of 512 bytes per sector is used. Will this tool on Samsung's site do anything other than format the drive in the same way doing mkntfs -s 4K /dev/sdb1 would do? To be specific, I'm intending to use this drive on a machine that will primarily run Windows XP, but I'd rather boot into Linux/BSD and format the disk manually than have bloated software. I do want to have the new AF style sectors though -- that's essential. So if I did the command above, would it have exactly the same effect as using the advanced format tool?

  Read the article

• Will my Lenovo One Key Recovery work if I install Ubuntu on my Ideapad U410?

  - by dostiharise

  I own a Lenovo Ideapad U410. Being a game developer the first thing that I wanted to do is install Ubuntu. But I don't want to lose the Windows 7 that ships with the laptop. So, I wanted to know if the Lenovo One Key Recovery mechanism is capable of restoring the Windows 7, from the hidden recovery partition, after I install Ubunutu and enable Grub boot loader? Note: I am already aware that an alternative would be to create Factory Restore disks, to restore when necessary. But I cannot immediately do it unless I buy an External DVD Burner.

  Read the article

• Can one build a single disk RAID 1 array?

  - by Core Xii

  I have an Nvidia hardware RAID 1 array and need to reformat. But I don't have any spare storage media, so I need to get along with the 2 disks in the array. I figured I'd do as follows: Delete the array, so I have 2 separate but identical disks, A and B, with my files Put disk B aside Reformat disk A, build RAID 1 array with it, install Windows XP Put disk B back in Boot to Windows on disk A, copy my files from disk B to disk A Add disk B to the RAID 1 array, rebuild array And now I'd have a new RAID 1 array, fresh install and all my files intact (the ones I copied). Here are the parts I'm unsure about: Can I build a RAID 1 array using just one disk, then add the other one later? Can Windows on disk A see disk B and allow me to copy my files over?

  Read the article

• Restore default ownership in CentOS after terrible chown

  - by tgm

  Is there any way to restore the default ownership of a CentOS filesystem after an accidental chown -R user:group /* ? Before I go and reinstall, I thought I'd ask and perhaps save some time. I'm in the process of setting up a new dev machine (thankfully not prod) and typed too fast or missed the . key or something. I tried to cancel as soon as I caught it but all my /bin /boot /dev etc had already been changed. Is there hope, or just reinstall and be happy it wasn't a production machine?

  Read the article

• Why is the latency on one LVM volume consistently higher?

  - by David Schmitt

  I've got a server with LVM over RAID1. One of the volumes has a consistently higher IO latency (as measured by the diskstats_latency munin plugin) than the other volumes from the same group. As you can see, the dark orange /root volume has consistently high IO latency. Actually ten times the average latency of the physical devices. It also has the highest Min and Max values. My main concern are not the peaks, which occur under high load, but the constant load on (semi-)idle. The server is running Debian Squeeze with the VServer kernel and has four VServer containers and one KVM guest. I'm looking for ways to fix - or at least understand - this situation. Here're some parts of the system configuration: root@kvmhost2:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system--host-root 19G 3.8G 14G 22% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 224K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/md0 942M 37M 858M 5% /boot /dev/mapper/system--host-isos 28G 19G 8.1G 70% /srv/isos /dev/mapper/system--host-vs_a 30G 23G 6.0G 79% /var/lib/vservers/a /dev/mapper/system--host-vs_b 5.0G 594M 4.1G 13% /var/lib/vservers/b /dev/mapper/system--host-vs_c 5.0G 555M 4.2G 12% /var/lib/vservers/c /dev/loop0 4.4G 4.4G 0 100% /media/debian-6.0.0-amd64-DVD-1 /dev/loop1 4.4G 4.4G 0 100% /media/debian-6.0.0-i386-DVD-1 /dev/mapper/system--host-vs_d 74G 55G 16G 78% /var/lib/vservers/d root@kvmhost2:~# cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=16500836k,nr_inodes=4125209,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 /dev/mapper/system--host-root / ext3 rw,relatime,errors=remount-ro,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/md0 /boot ext3 rw,sync,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-isos /srv/isos ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_a /var/lib/vservers/a ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_b /var/lib/vservers/b ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_c /var/lib/vservers/c ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/loop0 /media/debian-6.0.0-amd64-DVD-1 iso9660 ro,relatime 0 0 /dev/loop1 /media/debian-6.0.0-i386-DVD-1 iso9660 ro,relatime 0 0 /dev/mapper/system--host-vs_d /var/lib/vservers/d ext3 rw,relatime,errors=continue,data=ordered 0 0 root@kvmhost2:~# cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sda2[0] sdb2[1] 975779968 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 979840 blocks [2/2] [UU] unused devices: <none> root@kvmhost2:~# iostat -x Linux 2.6.32-5-vserver-amd64 (kvmhost2) 06/28/2012 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 3.09 0.14 2.92 1.51 0.00 92.35 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 23.25 161.12 7.46 37.90 855.27 1596.62 54.05 0.13 2.80 1.76 8.00 sdb 22.82 161.36 7.36 37.66 850.29 1596.62 54.35 0.54 12.01 1.80 8.09 md0 0.00 0.00 0.00 0.00 0.14 0.02 38.44 0.00 0.00 0.00 0.00 md1 0.00 0.00 53.55 198.16 768.01 1585.25 9.35 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.48 20.21 16.70 161.71 8.62 0.26 12.72 0.77 1.60 dm-1 0.00 0.00 3.62 10.03 28.94 80.21 8.00 0.19 13.68 1.59 2.17 dm-2 0.00 0.00 0.00 0.00 0.00 0.00 9.17 0.00 9.64 6.42 0.00 dm-3 0.00 0.00 6.73 0.41 53.87 3.28 8.00 0.02 3.44 0.12 0.09 dm-4 0.00 0.00 17.45 18.18 139.57 145.47 8.00 0.42 11.81 0.76 2.69 dm-5 0.00 0.00 2.50 46.38 120.50 371.07 10.06 0.69 14.20 0.46 2.26 dm-6 0.00 0.00 0.02 0.10 0.67 0.81 12.53 0.01 75.53 18.58 0.22 dm-7 0.00 0.00 0.00 0.00 0.00 0.00 7.99 0.00 11.24 9.45 0.00 dm-8 0.00 0.00 22.69 102.76 407.25 822.09 9.80 0.97 7.71 0.39 4.95 dm-9 0.00 0.00 0.06 0.08 0.50 0.62 8.00 0.07 481.23 11.72 0.16 root@kvmhost2:~# ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 59 May 11 11:19 control lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm1 -> ../dm-4 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm2 -> ../dm-3 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-isos -> ../dm-2 lrwxrwxrwx 1 root root 7 May 11 11:19 system--host-root -> ../dm-0 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-swap -> ../dm-9 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_d -> ../dm-8 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_b -> ../dm-6 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_c -> ../dm-7 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_a -> ../dm-5 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm3 -> ../dm-1 root@kvmhost2:~#

  Read the article

• Netgear router-speed problem after XBox use

  - by John Dudley

  When my son is at my place at the weekend, he plays XBox Live over the internet, using my wireless network (Netgear 'g' type router). This usually thrashes & crashes the router to the extent I have to hard-boot it to get it working again. However, after this weekend, on my two laptops, I'm left with the problem that the router is working, but I'm only getting 0.38Mbps out of it, at all times of the day. I've tried hard-booting the router, but no difference. Could this be a knock-on effect of the Xbox use? I can't believe the router could be damaged, but working slower? Is that possible? Tiscali haven't come back to me yet on any 'network' issues. Thanks in advance

  Read the article

• Working bootable CD now suddenly freezes at starting point

  - by xolstice

  I have this strange problem with a bootable CD I created that uses floppy disk 1.44MB emulation. The PC originally worked with it just fine and booted from the CD several times from the prior occasions I used it. Now for some strange reason it decides to freeze at the point where it displays the following text on the screen and does not proceed further: Boot from ATAPI CD-ROM 1. FD 1.44MB System Type-(00) The other strange thing is that if I put in a Linux bootable installation CD, it boots that without any issues. Everytime I stick this custom made bootable CD in it pulls this freezing act. Has anyone experienced this or know how to correct the problem?

  Read the article

• Dell Inspiron/Windows Vista sleep/hibernate issue

  - by sarge

  When I hit the sleep button in Windows the computer looks like it's going into Sleep mode but a few seconds later it's restarted, and stops with this error message: internal hard disk drive not found To resolve this issue, try to reseat the drive. No bootable devices--strike F1 to retry boot, F2 for setup utility Press F5 to run onboard diagnostics. The computer is running Windows Vista (SP2) and I have installed all available Windows Updates and the latest manufacturer drivers. I have already tried to reseated the drive, ran the onboard diagnostics and there were no errors. I have changed the power settings for all devices where it's available so that they are not allowed to wake up the computer. Any ideas?

  Read the article

• Windows 7 disc not recognized by DVD drive

  - by Ed Manet

  My machine is a recent model Systemax, less than 2 years old. It came with Vista 32bit and I bought Windows 7 Home Premium Upgrade for it. When I insert the Windows 7 DVD into the drive, it churns a little but does not recognize the disc. If I double click the DVD drive icon, it prompts me to insert a disc. I tried a different DVD (Office 2007) and the drive recognized the disc. I tried the Windows 7 disc in my Dell laptop and it recognized the disc. So basically, the disc is good and the drive is good, but they don't like each other. I tried to boot to the Windows 7 DVD and the system did not see it. I turned off the Lightscribe service and that didn't help. Does anybody have an idea what's wrong here? Thanks.

  Read the article

• Computer randomly shuts down with a fading alarm power button and CD drive

  - by Shad

  I am currently experiencing something very very odd. Having build my PC myself, I have never had any issues (or anything heat related). A few moments ago my computer shut down very randomly and everything goes blank, when I looked down on my case's power button it was fading on and off in such way I've had never seen before. I noticed the CD drive all of a sudden also started blinking randomly. What do you guys think this problem is related to? It is definitely not a overheating issue and I am pretty sure my 600 watt power supply didn't blow because right now I am able to turn it on and boot up the PC but 20 seconds later it shuts down (sometimes doesn't shut down for 2 minutes). I have no idea what this is... My specs are (built by myself): i5 3570k (unoverclocked) GTX 560ti Asrock Z77 Pro4-M motherboard 8GB Vengeance RAM 600W Corsair power supply 500GB of Seagate HD Case: Corsair Carbide 300R

  Read the article

• Is it a good idea to have the operating system on a solid state drive?

  - by Kenji Kina

  There is something I don't quite understand. I know a SSD helps with OS load times, but I'm not sure if all this boost is only noticeable/interesting when booting, or gives an all around considerably better experience thereafter. I am interested in having a quick and responsive environment after booting, which leads me to think that it'd be better to spend the SSD capacity in my most used apps (and the page file? Another inside question) and not the OS itself. This, of course, means that I don't know just how much the OS reads/writes its files during normal usage. So, how good an idea is it to dump the whole 20GB+ of Windows 7 OS into the SSD (considering the hefty price per GB of SSD capacity) if I can put up with the usual hard disk boot times? Would I be missing on a lot if I didn't?

  Read the article

• How do I disable alert beeps

  - by wheresrhys

  My HP pavilion laptop is getting pretty old and the speakers no longer work properly. So I've disabled all audio devices, including disabling the light-touch volume controls at boot-up. The one sound still here that I can't get rid of is teh alert beep whenever there's an error. It's annoying at the best of times, but when your laptop has no other sounds at all it's intensly irritating! Nothing I change in the windows settings or in the BIOS seems to have any effect. Any ideas how to switch them off?

  Read the article

• Startup Disk Creator tool for Debian

  - by user61954

  I was trying to create a USB bootable in Debian to install my new system. I couldnt find any easy to use tool in Debian. I tried downloading the hybrid iso image from the Debian site and copied it to the USB using the dd command as said in Debian site. But it didnt boot. Next I used the Startup Disk Creator tool in Ubuntu and it worked like a charm. Is there any similar tool in Debian? I know that there is Unetbootin but its difficult to install

  Read the article

• How do I disable aalert beeps

  - by wheresrhys

  My HP pavilion laptop is getting pretty old and the speakers no longer work properly. So I've disabled all audio devices, including disabling the light-touch volume controls at boot-up. The one sound still here that I can't get rid of is teh alert beep whenever there's an error. It's annoying at the best of times, but when your laptop has no other sounds at all it's intensly irritating! Nothing I chaneg in the windows settings or in the BIOS seems to have any effect. Any ideas how to switch them off?

  Read the article

• CHKDSK always runs on Hyper-V image

  - by Dave

  I am having a problem with one of my VM's. Every time it boots, CHKDSK runs and finds no errors, but it goes into an endless loop (CHKDSK/Reboot/CHKDSK). The only way I can get Windows to boot is by cancelling the chkdsk. Is there any way I can tell windows to not do it? What do you guys suggest? Can't redo server. I guess it's also fair to say I get the following errors in Event Viewer "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2" "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:\" I only have 1 VHD attached, not sure what Volume 2 is. Thanks!

  Read the article

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• iMac invalid memory access and then crash?

  - by Sam McAfee

  My iMac G5 from a few years ago (the square white one) dies now, with a message about an invalid memory access. It goes straight to an Open Firmware prompt and doesn't even load the Mac OS at all. Am I correct in guessing that the memory is probably the issue, and that if I replace it, we may be able to boot again as normal? That's my gut feeling anyway, so I ordered some more memory and plan to swap it today. Any thoughts? Ideas?

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >