Search Results

Search found 7685 results on 308 pages for 'job scheduler'.

Page 273/308 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

  • I’m a Phoenix… and I’m miffed

    - by Stan Spotts
    For personal reasons, almost 30 years ago I left school to enter the workforce. I decided late 2008 to go back to school and finish my degree. After the expected loss of credits for a transfer, from Temple University to University of Phoenix, I'm now about 75% done. The experience has been interesting. Classes are time compressed, only 5 weeks each. Because I have a family and a full time job, I'm taking one at a time. Even so, I've written more papers in these classes than I ever wrote at Temple. My own papers are one thing, but the team papers give me heartburn since I can't completely control what goes into them. Not a big deal except that they make up 30% of our grade. In any case, most of the class facilitators have been great. I had great ones for Accounting, Finance, and frankly most others. I've had a few (4, maybe) cases where I was less than 2 points from an A, and asked the facilitator if I could get any of my work reviewed to see if I could get those extra points. I figured it was worth a shot, and there were no extenuating circumstances to help make my case. I think that only one facilitator decided after a review of one paper that my interpretation was good, just not what he expected, and gave me another point, which gave me an A. So while none are pushovers, they've all been open to discussion, which is as much as I should expect. Overall, good experience. That is, until my last class. On the second week, the day I was due to hand in my personal assignment for the week, I was in an accident. An SUV creamed my little Ford Focus, and totaled it (estimated repair over $11K). I was pretty banged up, especially my left shoulder. I was scheduled for rotator cuff surgery for two weeks later, and getting hit against the door really made it worse. After dealing with the police, the EMT, the tow truck, and the Percocet and Flexeril for the pain, I crashed for the night and didn't get to upload my paper until the next day. The instructor took 30% off for it being late, even after I supplied photos of the car, my arm (huge bruises), and offered to supply the police report number. I figured I'd be okay since that's 2.7 points, and I could lose up to 5 before jeopardizing an A grade. Well, that wasn't the case as we lost more points than I expected on our team paper in Week 5. I ended up with a 94.3. Yes, 7/10 of a point from an A. Of course I asked the instructor to review the issue with the accident and give me just the 0.7 points I needed for the A. That got me a short response of "I have received your emails and review your work over the last five weeks. Your current grade will stand. If you would like to dispute your grade then please feel free to contact your academic advisor. I wish you much success in your professional and academic career." Brrrr….! So I asked my academic advisor to file a dispute. If it wasn't that a pretty bad car accident was the cause, I wouldn't have. Without the grade reduction, I would have had a 97 for the class, so I'll argue that I was performing at the A level throughout the class. Why her purported "review" of my work didn't then warrant such a minor adjustment, I don't know. An A- drops my GPA, and this ticked me off. Now I have to wait and see what the school says about the grade dispute.

    Read the article

  • Add Microsoft Core Fonts to Ubuntu

    - by Matthew Guay
    Have you ever needed the standard Microsoft fonts such as Times New Roman on your Ubuntu computer?  Here’s how you can easily add the core Microsoft fonts to Ubuntu. Times New Roman, Arial, and other core Microsoft fonts are still some of the most commonly used fonts in documents and websites.  Times New Roman especially is often required for college essays, legal docs, and other critical documents that you may need to write or edit.  Ubuntu includes the Liberation alternate fonts that include similar alternates to Times New Roman, Arial, and Courier New, but these may not be accepted by professors and others when a certain font is required.  But, don’t worry; it only takes a couple clicks to add these fonts to Ubuntu for free. Installing the Core Microsoft Fonts Microsoft has released their core fonts, including Times New Roman and Arial, for free, and you can easily download these from the Software Center.  Open your Applications menu, and select Ubuntu Software Center.   In the search box enter the following: ttf-mscorefonts Click Install on the “Installer for Microsoft TrueType core fonts” directly in the search results. Enter your password when requested, and click Authenticate. The fonts will then automatically download and install in a couple minutes depending on your internet connection speed. Once the install is finished, you can launch OpenOffice Writer to try out the new fonts.  Here’s a preview of all the fonts included in this pack.  And, yes, this does included the infamous Comic Sans and Webdings fonts as well as the all-important Times New Roman. Please Note:  By default in Ubuntu, OpenOffice uses Liberation Serif as the default font, but after installing this font pack, the default font will switch to Times New Roman. Adding Other Fonts In addition to the Microsoft Core Fonts, the Ubuntu Software Center has hundreds of free fonts available.  Click the Fonts link on the front page to explore these, and install the same as above. If you’ve downloaded another font individually, you can also install it easily in Ubuntu.  Just double-click it, and then click Install in the preview window. Conclusion Although you may prefer the fonts that are included with Ubuntu, there are many reasons why having the Microsoft core fonts can be helpful.  Thankfully it’s easy in Ubuntu to install them, so you’ll never have to worry about not having them when you need to edit an important document. Similar Articles Productive Geek Tips Enable Smooth fonts on Ubuntu LinuxEmbed True Type Fonts in Word and PowerPoint 2007 DocumentsNew Vista Syntax for Opening Control Panel Items from the Command-lineStupid Geek Tricks: Enable More Fonts for the Windows Command PromptAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • What is Agile Modeling and why do I need it?

    What is Agile Modeling and why do I need it? Agile Modeling is an add-on to existing agile methodologies like Extreme programming (XP) and Rational Unified Process (RUP). Agile Modeling enables developers to develop a customized software development process that actually meets their current development needs and is flexible enough to adjust in the future. According to Scott Ambler, Agile Modeling consists of five core values that enable this methodology to be effective and light weight Agile Modeling Core Values: Communication Simplicity Feedback Courage Humility Communication is a key component to any successful project. Open communication between stakeholder and the development team is essential when developing new applications or maintaining legacy systems. Agile models promote communication amongst software development teams and stakeholders. Furthermore, Agile Models provide a common understanding of an application for members of a software development team allowing them to have a universal common point of reference. The use of simplicity in Agile Models enables the exploration of new ideas and concepts through the use of basic diagrams instead of investing the time in writing tens or hundreds of lines of code. Feedback in regards to application development is essential. Feedback allows a development team to confirm that the development path is on track. Agile Models allow for quick feedback from shareholders because minimal to no technical expertise is required to understand basic models. Courage is important because you need to make important decisions and be able to change direction by either discarding or refactoring your work when some of your decisions prove inadequate, according to Scott Ambler. As a member of a development team, we must admit that we do not know everything even though some of us think we do. This is where humility comes in to play. Everyone is a knowledge expert in their own specific domain. If you need help with your finances then you would consult an accountant. If you have a problem or are in need of help with a topic why would someone not consult with a subject expert? An effective approach is to assume that everyone involved with your project has equal value and therefore should be treated with respect. Agile Model Characteristics: Purposeful Understandable Sufficiently Accurate Sufficiently Consistent Sufficiently Detailed Provide Positive Value Simple as Possible Just Fulfill Basic Requirements According to Scott Ambler, Agile models are the most effective possible because the time that is invested in the model is just enough effort to complete the job. Furthermore, if a model isn’t good enough yet then additional effort can be invested to get more value out of the model. However if a model is good enough, for the current needs, or surpass the current needs, then any additional work done on the model would be a waste. It is important to remember that good enough is in the eye of the beholder, so this can be tough. In order for Agile Models to work effectively Active Stakeholder need to participation in the modeling process. Finally it is also very important to model with others, this allows for additionally input ensuring that all the shareholders needs are reflected in the models. How can Agile Models be incorporated in to our projects? Agile Models can be incorporated in to our project during the requirement gathering and design phases. As requirements are gathered the models should be updated to incorporate the new project details as they are defined and updated. Additionally, the Agile Models created during the requirement phase can be the bases for the models created during the design phase.  It is important to only add to the model when the changes fit within the agile model characteristics and they do not over complicate the design.

    Read the article

  • BizTalk 2009 - BizTalk Benchmark Wizard: Installation

    - by StuartBrierley
    As previously detailed, I have completed a single server installation of BizTalk Server 2009 standard on my development laptop; a MacBook Pro Core2Duo running at 2.16Ghz with 2Gb of RAM.  Following this I also posted on my use of the BizTalk Server Best Practices Anaylser and how to configure the BizTalk SQL Server Jobs.  All of which means that I should have some confidence that I have a decent working BizTalk Server 2009 environment, Next I thought that it would be a good idea to try and get some idea of how this setup performs by carrying out some baseline tests that can then be replicated on the test and live servers. The aim of this would be to allow confident predictions to be made of how any solutions developed on a single "server" installation may be expected to perform when deployed to these multi-server BizTalk Server 2009 standard installations. The BizTalk Benchmark Wizard would seem to be the perfect tool for the job. The BizTalk Benchmark Wizard is a ultility that can be used to gain some validation of a BizTalk installation, giving a level of guidance on whether it is performing as might be expected. This utility should be used after BizTalk Server has been installed and before any solutions are deployed to the environment.  This will ensure that you are getting consistent and clean results from the BizTalk Benchmark Wizard. The BizTalk Benchmark Wizard applies load to the BizTalk Server environment under a choice of specific scenarios. During these scenarios performance counter information is collected and assessed against statistics that are appropriate to the BizTalk Server environment: "The executed scenarios may or may not be relative to any realistic scenario, and is only intended for testing. The BizTalk Benchmark Wizard has been developed in relation to the BizTalk Server 2009 Scale Out Testing Study. More information about the study can be found here: http://msdn.microsoft.com/en-us/library/ee377068(BTS.10).aspx" After downloading and installing the wizard you will need set up the Hosts, Instances and Adapter handlers.  This is done by running a script file using the “cscript” detailed below.  To do this you will need to open a command prompt window and navigate to the script folder; assuming the default installation location this would be C:\Program Files\Blogical\BizTalk Benchmark Wizard\Artefacts\BizTalk. In this folder you should find an InstallHosts.vbs file which can be executed using the following parameters: NTGroupName - The name of the Windows NT group. UserName – The name of the user account running the service instances. Password – The password of the user account running the service instances. Receive Host – The name of the server where you want to run the receive host instance.  Send Host - The name of the server where you want to run the sen host instance. Processing Host - The name of the server where you want to run the process host instance. By default the script is set up for 64 bit hosts, so if you are running in 32 bit environment make sure that you change the following line in the script before continuing: from:   objHS.IsHost32BitOnly = False to:    objHS.IsHost32BitOnly = True If you have a single box installation, your script command might look like this: cscript InstallHosts.vbs "BizTalk Application Users" “\MyUser” “MyPassword” “BtsServer1” “BtsServer1” “BtsServer1” If you have a multi server installation, your script command might look like this: cscript InstallHosts.vbs "MyDomain\BizTalk Application Users" “MyDomain\MyUser” “MyPassword” “BtsServer1” “BtsServer2” “BtsServer2” Running this script will create: Three hosts (BBW_RxHost, BBW_TxHost and BBW_PxHost) Three host instances One send and one receive adapter handler for the WCF NetTcp adapter. You will then need to import the BizTalk MSI via the BizTalk Administration Console.  Open the BizTalk Administration Console, point to the “Applications” node and import the BizTalk Benchmark Wizard.msi found in the same folder as the script above. This will create a “BizTalk Benchmark Wizard” application along with all ports and orchestrations needed. To finish the installation you will need to run the BizTalk Benchmark Wizard.msi on all BizTalk servers to add the assemblies to the Global Assembly Cache (GAC). Next I will look at running the BizTalk Benchmark Wizard.

    Read the article

  • SQL SERVER – What is a Technology Evangelist?

    - by pinaldave
    When you hear that someone is an “evangelist” the first thing that might pop into your mind is the Christian church.  In fact, the term did come from Christianity, and basically means someone who spreads the news about their faith.  In the technology world, the same definition is true. Technology evangelists are individuals who, professionally or in their spare time, spread the news about the latest new products.  Sounds like a salesperson, right?  No they are absolutely different. Salespeople also keep up to date with a large number of people, and like to convince others to buy their product – and some will go to any lengths to sell!  An evangelist, on the other hand, is brutally honest about the product, even if sometimes it means not making a sale.  An evangelist is out there to tell the TRUTH.  A salesperson needs to make sales. An Evangelist offers a Solution independent of Technology used – a Salesperson offers Particular Technology. With this definition in mind, you can probably think of a few technology evangelists you already know.  Maybe it’s a relative or a neighbor, someone who loves keeping up with the latest trends and is always willing to tell you about them if you ask even the simplest question.  And, in fact, they probably are evangelists and don’t even know it.  For a long time, the work of technology evangelism was in the hands of community and community technology leaders. Luckily now various organizations have understood the importance of the community and helping community to reach their goals. This has lead them to create role of “Technology Evangelists”. Let me talk about one of the most famous Evangelist of the SQL Server technology. Technology Evangelist only belongs to technology and above any country, race, location or any other thing. They are dedicated to the technology. Vinod Kumar is such a man, who have given a lot to community. For years he was a Technology Evangelist for Microsoft, and maintained a blog that was dedicated to spreading his enthusiasm for his favorite products.  He is one of the most respected Evangelists in the field, and has done a lot of work to define the job for other professionals. Vinod’s career has since progressed to the Microsoft Technology Center (read his post), but he is continuing to be a strong presence in the evangelism community.  I have a lot of respect for Vinod.  He has done a lot for the community and technology evangelism.  Everybody has dream to serve community the way he does, and he is a great role model for evangelists everywhere. On his blog, Vinod created one of the best descriptions of a Technology Evangelist.  It defined the position and also made the distinction between evangelist and salesperson extremely clear.  I will include the highlights of that list here, because no one can say it better than Vinod: Bundle of energy – Passion is their middle name Wonderful Story tellers Empathy, Trust, Loyalty, Openness, Accessibility and Warmth Technology Enthusiast – Doers Love people, people and more people – Community oriented Unique Style and Leadership qualities !!! Self-Confident, Self-Motivated but a student (To read the full list, see: Evangelism Beyond Borders with Evangelists) His blog is a must-read for anyone interested in technology evangelism as a career or simply a hobby.  His advice about how to gain an audience and become a trusted advisor is the best in the business. I think there is an evangelist in everyone. I, too, consider myself a technology evangelist.  Regular readers of this blog will recognize that I am dedicated to bringing information to the masses, and that I pride myself on being both brutally and honest and giving every product fair consideration. I think there is no better way of saying following subject. “Once an Evangelist – Always an Evangelist!” Reference: Pinal Dave (http://blog.SQLAuthority.com)     Filed under: About Me, Database, MVP, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Evangelist

    Read the article

  • IntelliTrace As a Learning Tool for MVC2 in a VS2010 Project

    - by Sam Abraham
    IntelliTrace is a new feature in Visual Studio 2010 Ultimate Edition. I see this valuable tool as a “Program Execution Recorder” that captures information about events and calls taking place as soon as we hit the VS2010 play (Start Debugging) button or the F5 key. Many online resources already discuss IntelliTrace and the benefit it brings to both developers and testers alike so I see no value of just repeating this information.  In this brief blog entry, I would like to share with you how I will be using IntelliTrace in my upcoming talk at the Ft Lauderdale ArcSig .Net User Group Meeting on April 20th 2010 (check http://www.fladotnet.com for more information), as a learning tool to demonstrate the internals of the lifecycle of an MVC2 application.  I will also be providing some helpful links that cover IntelliTrace in more detail at the end of my article for reference. IntelliTrace is setup by default to only capture execution events. Microsoft did such a great job on optimizing its recording process that I haven’t even felt the slightest performance hit with IntelliTrace running as I was debugging my solutions and projects.  For my purposes here however, I needed to capture more information beyond execution events, so I turned on the option for capturing calls in addition to events as shown in Figures 1 and 2. Changing capture options will require us to stop our debugging session and start over for the new settings to take place. Figure 1 – Access IntelliTrace options via the Tools->Options menu items Figure 2 – Change IntelliTrace Options to capture call information as well as events Notice the warning with regards to potentially degrading performance when selecting to capture call information in addition to the default events-only setting. I have found this warning to be sure true. My subsequent tests showed slowness in page load times compared to rendering those same exact pages with the “event-only” option selected. Execution recording is auto-started along with the new debugging session of our project. At this point, we can simply interact with the application and continue executing normally until we decide to “playback” the code we have executed so far.  For code replay, first step is to “break” the current execution as show in Figure 3.   Figure 3 – Break to replay recording A few tries later, I found a good process to quickly find and demonstrate the MVC2 page lifecycle. First-off, we start with the event view as shown in Figure 4 until we find an interesting event that needs further studying.  Figure 4 – Going through IntelliTrace’s events and picking as specific entry of interest We now can, for instance, study how the highlighted HTTP GET request is being handled, by clicking on the “Calls View” for that particular event. Notice that IntelliTrace shows us all calls that took place in servicing that GET request. Double clicking on any call takes us to a more granular view of the call stack within that clicked call, up until getting to a specific line of code where we can do a line-by-line replay of the execution from that point onwards using F10 or F11 just like our typical good old VS2008 debugging helped us accomplish. Figure 5 – switching to call view on an event of interest Figure 6 – Double clicking on call shows a more granular view of the call stack. In conclusion, the introduction of IntelliTrace as a new addition to the VS developers’ tool arsenal enhances development and debugging experience and effectively tackles the “no-repro” problem. It will also hopefully enhance my audience’s experience listening to me speaking about  an MVC2 page lifecycle which I can now easily visually demonstrate, thereby improving the probability of keeping everybody awake a little longer. IntelliTrace References: http://msdn.microsoft.com/en-us/magazine/ee336126.aspx http://msdn.microsoft.com/en-us/library/dd264944(VS.100).aspx

    Read the article

  • Silverlight Cream for March 25, 2010 -- #820

    - by Dave Campbell
    In this Issue: René Schulte, Jeremy Likness, Hassan, Victor Gaudioso, SilverLaw, Mike Taulty, Phani Raj, Tim Heuer, Christian Schormann, Brad Abrams, David Anson, Diptimaya Patra, and Daniel Vaughan. Shoutouts: Last week, Koen Zwikstra announced Silverlight Spy at MIX10 Anand Iyer announced this for students on the Windows Team Blog: Be a Windows Phone 7 “Rockstar” Justin Angel blogged that Silverlight Isn't Fully Cross-Platform ... let him know if you think it's a yawn or important. On behalf of SilverlightShow, Cigdem Patlak posted MIX10: Laurent Bugnion on Silverlight adoption, WP7 and the EcoContest From SilverlightCream.com: Coding4Fun - Silverlight Real Time Face Detection René Schulte has a Coding 4 Fun article posted on facial recognition. Who better to be manipulating graphics like this than René? Sequential Asynchronous Workflows Part 2: Simplified Jeremy Likness follows up his previous post with another one that is 'simplified'. Remember his previous post began with a post on the Silverlight.net forum and Rob Eisenburg's MVVM presentation from MIX10 Windows Phone 7 Video Tutorial Hassan has a new video up on his AfricanGeek site, and that's a continuation of his previous WP7 video tutorial, adding a listbox and databinding it to the selected index of another listbox. The Los Angeles Silverlight Usergorup will be Streaming its March Meeting LIVE in Silverlight – Tonight! Victor Gaudioso used his Live Streaming knowledge to stream his User Group meeting last night from LA where Michael Washington presented on MVVM followed by Victor himself. That was last night. Today he has a couple of the videos up to view. Shining 3D Font Design - Silverlight 3 SilverLaw has a "Shining 3D Font" tutorial up, and a video on it here: New Video: How to create a 3D effect on a Silverlight 3 Textblock ... this is also available in the Expression Gallery. Silverlight 4 RC – Signing trusted apps with home made certificates Mike Taulty has a post up about building a hand-rolled cert to test out the XAP signing features, and then gives a nod to John Papa with a link to the Silverlight White Paper I've posted about before, because this info is in there as well. Developing a Windows Phone 7 Application that consumes OData Phani Raj has a tutorial up on consuming the NetFlix OData catalog on the WP7 emulator ... now *that* is cool! Make your Silverlight applications Speak to you with Microsoft Translator Tim Heuer used Silverlight to demonstrate Microsoft Translator as a speech synthesis tool using the Speak API included ... pretty cool, Tim ... lots of external links and code. Blend 4: About Path Layout, Sidebar – More About ListBox Than You Ever Wanted To Know Christian Schormann has another outstanding tutorial up on the ListBox and PathLayout in Expression Blend ... just check out the screen shots and you'll wanna read it! Silverlight 4 + RIA Services: Ready for Business: Updating Data in the Client This is the continuation of Brad Abrams' series on WCF RIA Services and is a tutorial on setting up to deal with updating the data. Tip: The CLR wrapper for a DependencyProperty should do its job and nothing more David Anson is posting some "Development Tips", and this is the first ... discussing making sure your DependencyProperty CLR wrapper stays on point... Create and Apply Theme Silverlight Application Diptimaya Patra has a tutorial up on creating and using themes. He states that "Themes are nothing but some predefined styles" ... check it out and see if it's really that easy :) Building a Windows Phone 7 Puzzle Game Daniel Vaughan has a great post up starting with installing all the tools and ending with a maze game for WP7 using XNA for sound... this is the first I've seen that integrates XNA (I think). Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone    MIX10

    Read the article

  • SQLAuthority News – The Best Quotes of “Who Wrote This?” Contest

    - by pinaldave
    I am a frequent reader of Brent Ozar PLF, it is one of my favorite blogs. A recent post announced a “Who Wrote This?” contest to see if readers could tell their three contributors apart based on some writing samples. Here are my favorite lines from the sample paragraphs, from each of the three “mystery authors.” Topic 1: Working with Bad Managers Mystery Author A – “Working with bad managers means working against my own happiness, and I’ve come to learn that there’s no changing bad managers.” I love this line because, as anyone who has had a bad manager knows, often a lot of self-doubt rises up. We all have to remember that sometimes the problem is out of our control. Mystery Author B – “Mentor your manager just like you would mentor a junior DBA.” Having a bad manager can be extremely depressing, and we often feel out of control. But we all need to remember that our work is a two-way street, and that sometimes we can subtly influence those above us. Mystery Author C – “The trick to working for all bad managers is to remember that they aren’t your parent. Take charge of your career.” We all also need to learn not to play the blame game. Would you rather stay in a place where you are unhappy, or would you rather take charge of your life? I hope most people would pick the latter. Topic 2: Working with Remote Teams Mystery Author A – “Like almost anything else the key is to make sure that everyone on the team has an understanding of how and when communication will occur.” Communication is so important. I cannot over emphasize how much. And this one line captures how I feel and even communicates the idea clearly! Mystery Author B – “The key to remote team success is verifiable trust: feeling confident that invisible team members are doing the right amount of the right thing at the right time.” I think this line not only captures the key aspects of remote work – verifiable work and trust – but there were so many lines that followed that I loved and could not fit here. The whole paragraph is a list for successful remote work. Everyone could benefit from reading it. Mystery Author C – “What seems clear, precise, and specific in one time zone comes across as vague, soupy, and just plain weird in another.” You know what? I just love this description. The author is right – sometimes vague e-mails really do seem soupy and weird! Topic 3: Working with Your Nemesis Mystery Author A – “Every job is temporary, but your reputation stays with you.” Everyone needs to remember this. The workplace is meant to be a professional arena, and many people have the opinion that work is temporary and disposable. No one wants to work with co-worker like that. Mystery Author B – “Unhealthy conflict is going to lead to leaving three week old tuna fish sandwiches in someone’s desk drawer.” Sometimes humor really is the best policy! Mystery Author C – “Oh no, it’s that guy.” This might seem like a weird phrase to choose as my favorite from an entire paragraph. But the whole piece was written in the form of a story of co-workers getting drunk and plotting against a nemesis. It was too funny to overlook, but too long to post here. A must read! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • Things to install on a new machine – revisited

    - by RoyOsherove
    as I prepare to get a new dev machine at work, I write the things I am going to install on it, before writing the first line of code on that machine: Control Freak Tools: Everything Search Engine – a free and amazingly fast search engine for files all over your machine. (just file names, not inside files). This is so fast I use it almost as a replacement for my start menu, but it’s also great for finding those files that get hidden and tucked away in dark places on my system. Ever had a situation where you needed to see exactly how many copies of X.dll were hiding on your machine and where? this tool is perfect for that. Google Chrome. It’s just fast. very fast. and Firefox has become the IE of alternative browsers in terms of speed and memory. Don’t even get me started on IE. TweetDeck – get a complete view of what’s up on twitter Total Commander – my still favorite file manager, over five years now. KatMouse – will scroll any window your hovering on, even if it’s not an active window, when you use scroll the wheel on it. PowerIso or Daemon Tools – for loading up ISO images of discs LogMeIn Ignition – quick access to your LogMeIn computers for online Backup: JungleDisk or BackBlaze KeePass – save important passwords MS Security Essentials – free anti virus that’s quoest and doesn’t make a mess of your system. for home: uTorrent – a torrent client that can read rss feeds (like the ones from ezrss.it ) Camtasia Studio and SnagIt – for recording and capturing the screen, and then adding cool effects on top. Foxit PDF Reader – much faster that adove reader. Toddler Keys (for home) – for when your baby wants to play with your keyboard. Live Writer – for writing blog posts for Lenovo ThinkPads – Lenovo System Update – if you have a “custom” system instead of the one that came built in, this will keep all your lenovo drivers up to date. FileZilla – for FTP stuff All the utils from sysinternals, (or try the live-links) especially: AutoRuns for deciding what’s really going to load at startup, procmon to see what’s really going on with processes in your system   Developer stuff: Reflector. Pure magic. Time saver. See source code of any compiled assembly. Resharper. Great for productivity and navigation across your source code FinalBuilder – a commercial build automation tool. Love it. much better than any xml based time hog out there. TeamCity – a great visual and friendly server to manage continuous integration. powerful features. Test Lint – a free addin for vs 2010 I helped create, that checks your unit tests for possible problems and hints you about it. TestDriven.NET – a great test runner for vs 2008 and 2010 with some powerful features. VisualSVN – a commercial tool if you use subversion. very reliable addin for vs 2008 and 2010 Beyond Compare – a powerful file and directory comparison tool. I love the fact that you can right click in windows exporer on any file and select “select left side to compare”, then right click on another file and select “compare with left side”. Great usability thought! PostSharp 2.0 – for addind system wide concepts into your code (tracing, exception management). Goes great hand in hand with.. SmartInspect – a powerful framework and viewer for tracing for your application. lots of hidden features. Crypto Obfuscator – a relatively new obfuscation tool for .NET that seems to do the job very well. Crypto Licensing – from the same company –finally a licensing solution that seems to really fit what I needed. And it works. Fiddler 2 – great for debugging and tracing http traffic to and from your app. Debugging Tools for Windows and DebugDiag  - great for debugging scenarios. still wanting more? I think this should keep you busy for a while.   Regulator and Regulazy – for testing and generating regular expressions Notepad 2 – for quick editing and viewing with syntax highlighting

    Read the article

  • Optional Parameters and Named Arguments in C# 4 (and a cool scenario w/ ASP.NET MVC 2)

    - by ScottGu
    [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] This is the seventeenth in a series of blog posts I’m doing on the upcoming VS 2010 and .NET 4 release. Today’s post covers two new language feature being added to C# 4.0 – optional parameters and named arguments – as well as a cool way you can take advantage of optional parameters (both in VB and C#) with ASP.NET MVC 2. Optional Parameters in C# 4.0 C# 4.0 now supports using optional parameters with methods, constructors, and indexers (note: VB has supported optional parameters for awhile). Parameters are optional when a default value is specified as part of a declaration.  For example, the method below takes two parameters – a “category” string parameter, and a “pageIndex” integer parameter.  The “pageIndex” parameter has a default value of 0, and as such is an optional parameter: When calling the above method we can explicitly pass two parameters to it: Or we can omit passing the second optional parameter – in which case the default value of 0 will be passed:   Note that VS 2010’s Intellisense indicates when a parameter is optional, as well as what its default value is when statement completion is displayed: Named Arguments and Optional Parameters in C# 4.0 C# 4.0 also now supports the concept of “named arguments”.  This allows you to explicitly name an argument you are passing to a method – instead of just identifying it by argument position.  For example, I could write the code below to explicitly identify the second argument passed to the GetProductsByCategory method by name (making its usage a little more explicit): Named arguments come in very useful when a method supports multiple optional parameters, and you want to specify which arguments you are passing.  For example, below we have a method DoSomething that takes two optional parameters: We could use named arguments to call the above method in any of the below ways: Because both parameters are optional, in cases where only one (or zero) parameters is specified then the default value for any non-specified arguments is passed. ASP.NET MVC 2 and Optional Parameters One nice usage scenario where we can now take advantage of the optional parameter support of VB and C# is with ASP.NET MVC 2’s input binding support to Action methods on Controller classes. For example, consider a scenario where we want to map URLs like “Products/Browse/Beverages” or “Products/Browse/Deserts” to a controller action method.  We could do this by writing a URL routing rule that maps the URLs to a method like so: We could then optionally use a “page” querystring value to indicate whether or not the results displayed by the Browse method should be paged – and if so which page of the results should be displayed.  For example: /Products/Browse/Beverages?page=2. With ASP.NET MVC 1 you would typically handle this scenario by adding a “page” parameter to the action method and make it a nullable int (which means it will be null if the “page” querystring value is not present).  You could then write code like below to convert the nullable int to an int – and assign it a default value if it was not present in the querystring: With ASP.NET MVC 2 you can now take advantage of the optional parameter support in VB and C# to express this behavior more concisely and clearly.  Simply declare the action method parameter as an optional parameter with a default value: C# VB If the “page” value is present in the querystring (e.g. /Products/Browse/Beverages?page=22) then it will be passed to the action method as an integer.  If the “page” value is not in the querystring (e.g. /Products/Browse/Beverages) then the default value of 0 will be passed to the action method.  This makes the code a little more concise and readable. Summary There are a bunch of great new language features coming to both C# and VB with VS 2010.  The above two features (optional parameters and named parameters) are but two of them.  I’ll blog about more in the weeks and months ahead. If you are looking for a good book that summarizes all the language features in C# (including C# 4.0), as well provides a nice summary of the core .NET class libraries, you might also want to check out the newly released C# 4.0 in a Nutshell book from O’Reilly: It does a very nice job of packing a lot of content in an easy to search and find samples format. Hope this helps, Scott

    Read the article

  • gnome3 and unity bug in 11.10

    - by LinuxNoob
    Yes I am new to Linux but am learning stuff daily as I finally migrated my work systems to Ubuntu 11.10 and they works pretty decent given the fact that some of the application I have to use to do my job are not supported by Linux ... yet. Anyways, I was working with Unity, not even knowing there was a Gnome3 environment until I ran across a post while searching for a fix on another unrelated issue. Lo and behold, I was able after much searching to log in Gnome 3 after installing the required packages. I don't know how many articles I had to read for someone to tell me how to log into Gnome3 or into Unity by selecting the little wheel on the login screen to get the drop down for the different environments ...(I know... I'm such a Noob but I'm sure we all were at one time or another). Again, after using Unity, I was hooked on Linux and decided if I can get it to work with all the Apps I need at work and play a little WOW every now and again, I'm good to go. But again to the point. I logged into Gnome3. No icons but just a cool experience to see what the heck this thing does. I eventually figured out how to use it and I love Gnome 3 but it is as buggy as the C++ programs I first learned to write in college. I don't know if it's because i installed the packages after I was up and running in Unity or what. The issues I have are that it locks the desktop up randomly..just locks it up. Usually when i have a lot of screens opened. Never fails that it does it when i put the mouse up in the top/left corner to swap Apps. Then I can't get to the windows in the back to shut them down. A few times i just have to turn the power off on my PC ( sigh, what a POS I say to myself every time I decide "oh it was an isolated incidence"...try it again..it's so cool and designed the way I would design a desktop .. intuitive...just cool man cool) but it fails me again and again. If I had to guess I would say it's a memory problem..i do have 2gigs but nevertheless it just stops working. The mouse doesn't respond ...eventually the keyboard doesn't respond. Just the Power Off button is the only way out. Never had an issue like this in Unity. Using the same Apps in the same way and I bet the system will crash in 45 minutes to an hour. Usually, I have 7-10 windows opened. I wish I knew enough to get the correct logs, I'm sure it's a bug. I'm not doing anything fancy..just running email, word docs, jave apps, vpn, pidgin, maybe some SQL stuff or communication Apps, etc. Anyways I've decided to wait for another major release to try it again... until then I'm sticking with Unity which is also very cool.

    Read the article

  • Call Webservices&hellip;Maybe!?

    - by MOSSLover
    So I have been doing preliminary work for my iOS talk for a while, but did not get into the meat of the project until recently.  One day I envision my talk uploading pictures from a camera on an iPhone or iPad into SharePoint and telling people how I did it.  As you know with my Silverlight talk and any new technology, building new talks with new technologies always ends up with some pain points that you must jump over just to grab data.  So step 1 always starts out with how do we even access a webservice using the new technology. I started out watching every single SPC video available on oAuth and Rest Webservices in SharePoint 2013.  I also sent an email to Eric Shupps about some REST and 2013 examples.  The videos further confused me, because all the videos were on SharePoint hosted apps (provider and autohosted).  I did not want to create a SharePoint hosted app, but instead a mobile app outside of the SharePoint context altogether.  Nick Swan sent me his code and it was great for a starting point on how the JSON calls would look like on iOS, but I was still missing a piece.  Nick does a great job on showing how to use the REST/JSON calls in a non-MS tech, however his presentation uses the SharePoint context and can grab the SPAppToken.  At this point I had to ask the question how do you grab the SAML token outside of SharePoint 2013 in iOS using Objective-C?  After reading all the MSDN documentation, some documentation on Restkit and Objective-C/oAuth calls, and some SharePoint 2013 blog post my head was swimming.  I was dreaming about REST and iOS in SharePoint 2013.  SAML tokens were taunting me.  I was nowhere near understanding 2013. I started talking to my friend, Pedro Jimenez, who is also playing with Objective-C and went to SPC.  He found me a couple good MSDN posts with REST/JSON calls that basically showed the accessToken was all I needed (at this point I was still thinking iOS needed to be a provider hosted app which is wrong).  So then again I had to ask the SAML token question…How do you get a SAML token outside of SharePoint without the TokenHelper class? So then I started talking to people and thinking why do I need to completely avoid TokenHelper…The solution in concept is basically create a webservice in Azure wrapped into a Provider Hosted App in SharePoint.  Wictor Wilen created a helper webservice in the following blog post: http://www.wictorwilen.se/Post/How-to-do-active-authentication-to-Office-365-and-SharePoint-Online.aspx. So now I have to basically stand up the webservice, the SharePoint app wrapper, and then use Restkit to call the first webservice to grab the token and then the second webservice to pass in the token and grab some SharePoint data.  What this means is that you can no longer just pass credentials into SharePoint webservices and get data back.  You have to pass in a SAML token with every single webservice call to SharePoint.  The theory is that this token is associated with the permissions the app can handle (read, write, whatever).  It seems like a ton of pain and a lot of work, but this is step 1 in my crusade to pull some piece of data into iOS from SharePoint and show people how to do it themselves.  In the upcoming months hopefully I can get halfway to my end goal. Technorati Tags: SharePoint 2013,REST,oAuth,Objective-C,iOS

    Read the article

  • Silverlight Firestarter thoughts, and thanks to one and all!

    - by Dave Campbell
    A few metrics that of course got out of hand, but some may find interesting:   1/2 My share of the MVP of the Year award in February of 2009 with Laurent Bugnion 2 Number of degrees I hold: B.S., M.S. Electrical Engineering 3 Number of years in the U.S. Army 3.5 Number of years SilverlighCream has been posted 4 Number of times awarded MVP 6 Number of professional positions I've worked: Antenna Rigger, Boilermaker, Musician, Electronic Technician, Hardware Engineer, Software Engineer 16 Number of companies I've worked for during my career as an Engineer 19 Age at which I turned my first line of code 28 Age at which I hit the workforce as an Engineer 33 Number of years working as an Engineer 43 Number of years writing code 62 Number of years since instantiation 116 Number of tags to search SilverlightCream with 645 Number of blogs I view to find articles (at this moment) 664 Number of articles tagged wp7dev at SilverlightCream right now 700 Number of Twitter followers for WynApse 981 Number of individual bloggers in the SilverlightCream database 1002 Number of SilverlightCream blogposts 1100 Number of people live in Redmond for the Firestarter (I think) 1428 Number of total blogposts at GeeksWithBlogs (not counting this one) 4200 Number of Feedburner subscribers (approximately) 6500 Number of Twitter followers for SilverlightNews (approximately) 7087 Number of posts tagged and aggregated at SilverlightCream right now 13000 Number of people registered to watch the Firestarter online (I think) The overwhelming feeling I have returning from the Silverlight Firestarter: Priceless There is absolutely no way that I could personally thank everyone that over the last few years has held their hand out and offered me a step up to get to the point that Scott Guthrie called me out in his keynote. So I'm just going to hit the highlights here... Scott Guthrie Thanks for not only being the level you are at Microsoft, but for being so approachable, easy to talk to, willing to help everyone, and above all knowledgable. My first level manager at my last position asked if Visual Studio was a graphics program... and you step up to a laptop at a conference and type "File->New Program" ... 'nuff said... oh yeah, thanks for the shoutout! John Papa Thanks for being a good friend, ramroding the Firestarter, being a great guy to be around, and for the poster... holy crap is that cool. Tim Heuer Thanks for all you did as a great DE in Phoenix, and for helping out so many of us, of course being a great guy, and for the poster as well... I think you and John shared that task. In no order at all my buddy Michael Washington, Laurent Bugnion (the other half of the first Silverlight MVP of the Year) Tim Sneath, Mike Harsh, Chad Campbell and Bryant Likes (from back in the day), Adam Kinney, Jesse Liberty, Jeff Paries, Pete Brown, András Velvárt, David Kelly, Michael Palermo, Scott Cate, Erik Mork, and on and on... don't feel bad if your name didn't appear, I have simply too many supporters to name. Silverlight Firestarter Indeed All the people mentioned here, and all the MVPs knew Silverlight was NOT dead, but because of a very unfortunate circumstance, the popular media opinion became that. Consequently the Firestarter exploded from a laid-back event to a global conference. People worked their ass off getting bits ready and presentations using those bits. All to stem the flow of misinformation. All involved please accept my personal thanks for an absolutely awesome job. I had the priviledge of watching the 'prep' on Wednesday afternoon, and was blown away the first time I saw the 3D demo... and have been blown away every time I've seen it since. Not to mention all the other goodness in Silverlight 5. Yes I hit 1000 on my blog, but more importantly, all of you are blogging and using Silverlight, and Microsoft hit one completely out of the park... no... they knocked it out of the neighborhood with the Firestarter. It was amazing to be there for it, and it will be awesome to use the new bits as we get them. Keep reading, there's tons more to come with Silverlight and SilverlightCream following along behind. As usual, this old hacker is humbled to be allowed to play with all the cool kids... Thanks one and all for everything, and Stay in the 'Light

    Read the article

  • Databases in Source Control

    - by Grant Fritchey
    I’ve been working as a database professional for quite a long time. But originally, I was a developer. And I loved being a developer. There was this constant feedback loop of a job well done, your code compiled and it ran. Every time this happened successfully, you’d check it into source control. These days you have to add another step; the code passed all the tests, unit, line, regression, qa, whatever, then into source control it goes. As a matter of fact, when I first made the jump from developer to DBA/database developer/database professional, source control was the one thing I couldn’t believe was missing from the DBA toolbox. Come to find out, source control was only the beginning of what was missing from your standard DBAs set of skills. Don’t get me wrong. I’m not disrespecting the DBA. They’re focused where they should be, on your production data. But there has to be a method for developing applications that include databases and the database side of that development and deployment process has long been lacking. This lack of development and deployment methodologies is a part of what has given rise to some of the wackier implementations of Object Relational Mapping tools, the NoSQL movement, and some of the other foul cursing that is directed towards databases, DBAs, and database development by application developers. Some of that is well earned. A lot isn’t. But it is a fact that database professionals, in general, do not have as sophisticated a model for managing development and deployment as application developers do. We could charge out and start trying to come up with our own standards and methods. I’m sure people have done exactly that. However, I’m lazy, and not terribly bright. Rather than try to invent a whole new process, I’m going to look to my developer roots and choose instead to emulate the developers. They’re sitting over there across the hall from me working with SCRUM/Agile/Waterfall/Object Driven/Feature Driven/Test Driven development processes that they’ve been polishing for years. What if I just started working on database development the same way they work on code development? Win! Ah, but now I have to have a mechanism for treating my database like application code. First, I need a method for getting it into source control. That’s where Red Gate’s SQL Source Control comes into the picture. SQL Source Control works within SQL Server Management Studio to connect your database objects up to the source control system of your choice. Right out of the box SQL Source Control can link to TFS, SVN or Vault. With a little work you can connect it to Git or just about any other source control system. With the ability to get my database into source control, a lot of possibilities for more direct integration with the application development teams open up.

    Read the article

  • Ann Arbor Day of .NET 2010 Recap

    - by PSteele
    Had a great time at the Ann Arbor Day of .NET on Saturday.  Lots of great speakers and topics.  And chance to meet up with friends you usually only communicate with via email/twitter. My Presentation I presented "Getting up to speed with C# 3.5 — Just in time for 4.0!".  There's still a lot of devs that are either stuck in .NET 2.0 or just now moving to .NET 3.5.  This presentation gave highlights of a lot of the key features of 3.5.  I had great questions from the audience.  Afterwards, I talked with a few people who are just now getting in to 3.5 and they told me they had a lot of "A HA!" moments when something I said finally clicked and made sense from a code sample they had seen on the web.  Thanks to all who attended! A few people have asked me for the slides and demo.  The slides were nothing more than a table of contents.  90% of the presentation was spent inside Visual Studio demo'ing new techniques.  However, I have included it in the ZIP file with the sample solution.  You can download it here. Dennis Burton on MongoDB I caught Dennis Burton's presentation on MongoDB.  I was really interested in this one as I've missed the last few times Dennis had given it to local user groups.  It was very informative and I want to spend some time learning more about MongoDB.  I'm still an old-school relational guy, but I'm willing to investigate alternatives. Brian Genisio on Prism Since I'm not a Silverlight/WPF guy (yet), I wasn't sure this would interest me.  But I talked with Brian for a couple of minutes before the presentation and he convinced me to catch it.  And I'm glad he did.  Prism looks like a very nice framework for "composable UI's" in Silverlight and WPF.  I like the whole "dependency injection" feel to it.  Nice job Brian! GiveCamp Planning I spent some time Saturday working on things for the upcoming GiveCamp (which is why I only caught a few sessions).  Ann Arbor's Day of .NET and GiveCamp have both been held at Washtenaw Community College so I took some time (along with fellow GiveCamp planners Mike Eaton and John Hopkins) to check out the new location for Ann Arbor GiveCamp this year! In the past, WCC has let us use the Business Education (BE) building for our GiveCamp's.  But this year, they're moving us over to the Morris Lawrence (ML) building.  Let me tell you – this is a step UP!  In the BE building, we were spread across two floors and spread out into classrooms.  Plus, our opening and closing ceremonies were held in the Liberal Arts (LA) building – a bit of a walk from the BE building. In the ML building, we're together for the whole weekend.  We've got a large open area (which can be sectioned off if needed) for everyone to work in:   Right next to that, we have a large area where we can set up tables and eat.  And it helps that we have a wonderful view while eating (yes, that's a lake out there with a fountain): The ML building also has showers (which we'll have access to!) and it's own auditorium for our opening and closing ceremonies. All in all, this year's GiveCamp will be great! Stay tuned to the Ann Arbor GiveCamp website.  We'll be looking for volunteers (devs, designers, PM's, etc…) soon! Technorati Tags: .NET,Day of .NET,GiveCamp,MongoDB,Prism

    Read the article

  • Where Next for Google Translate? And What of Information Quality?

    - by ultan o'broin
    Fascinating article in the UK Guardian newspaper called Can Google break the computer language barrier? In it, Andreas Zollman, who works on Google Translate, comments that the quality of Google Translate's output relative to the amount of data required to create that output is clearly now falling foul of the law of diminishing returns. He says: "Each doubling of the amount of translated data input led to about a 0.5% improvement in the quality of the output," he suggests, but the doublings are not infinite. "We are now at this limit where there isn't that much more data in the world that we can use," he admits. "So now it is much more important again to add on different approaches and rules-based models." The Translation Guy has a further discussion on this, called Google Translate is Finished. He says: "And there aren't that many doublings left, if any. I can't say how much text Google has assimilated into their machine translation databases, but it's been reported that they have scanned about 11% of all printed content ever published. So double that, and double it again, and once more, shoveling all that into the translation hopper, and pretty soon you get the sum of all human knowledge, which means a whopping 1.5% improvement in the quality of the engines when everything has been analyzed. That's what we've got to look forward to, at best, since Google spiders regularly surf the Web, which in its vastness dwarfs all previously published content. So to all intents and purposes, the statistical machine translation tools of Google are done. Outstanding job, Googlers. Thanks." Surprisingly, all this analysis hasn't raised that much comment from the fans of machine translation, or its detractors either for that matter. Perhaps, it's the season of goodwill? What is clear to me, however, of course is that Google Translate isn't really finished (in any sense of the word). I am sure Google will investigate and come up with new rule-based translation models to enhance what they have already and that will also scale effectively where others didn't. So too, will they harness human input, which really is the way to go to train MT in the quality direction. But that aside, what does it say about the quality of the data that is being used for statistical machine translation in the first place? From the Guardian article it's clear that a huge humanly translated corpus drove the gains for Google Translate and now what's left is the dregs of badly translated and poorly created source materials that just can't deliver quality translations. There's a message about information quality there, surely. In the enterprise applications space, where we have some control over content this whole debate reinforces the relationship between information quality at source and translation efficiency, regardless of the technology used to do the translation. But as more automation comes to the fore, that information quality is even more critical if you want anything approaching a scalable solution. This is important for user experience professionals. Issues like user generated content translation, multilingual personalization, and scalable language quality are central to a superior global UX; it's a competitive issue we cannot ignore.

    Read the article

  • Introducing .NET 4.0 with Visual Studio 2010 by Alex Mackey - Book review

    - by Malisa L. Ncube
    Alex (http://simpleisbest.co.uk/) does a very good job in covering the new features of .NET 4.0 and Visual Studio 2010. His focus is on the developers that have experience in development using previous versions of Visual Studio, more specifically Visual Studio 2008.     The following are my views towards his book. 1. Scope / Coverage Even as the book is labeled as introduction, it is covers a broad spectrum of technologies, features and references that are focused into helping a developer quickly decide what to use in the new .NET framework. a. Content The content included covers as much as possible the new additions that are included in the new .NET version 4.0. He shows the Visual Studio 2010 new features and quickly shows how to extend it using Managed Extensibility Framework. Some of my favorites are parallel debugging enhancements. The author delves into JQuery, which Microsoft has decided to support. Some of the very interesting content is on the out-of-band releases including ASP.NET MVC, Windows Azure Silverlight 3 and WCF Data Services. b. What is not included? Windows Phone 7 Series. This was only talked about in the MIX10. The data may not have been available at the time of writing. Microsoft Pinpoint (Microsoft code name "Dallas") Windows Embedded development. c. Table of Contents Chapter 1: Introduction Chapter 2: Visual Studio IDE and MEF Chapter 3: Language and Dynamic Changes Chapter 4: CLR and BCL Changes Chapter 5: Parallelization and Threading Enhancements Chapter 6: Windows Workflow Foundation 4 Chapter 7: Windows Communication Foundation Chapter 8: Entity Framework Chapter 9: WCF Data Services Chapter 10: ASPNET Chapter 11: Microsoft AJAX Library Chapter 12: jQuery Chapter 13: ASPNET MVC Chapter 14: Silverlight Introduction Chapter 15: WPF 4.0 and Silverlight 3.0 Chapter 16: Windows Azure 2. Depth Avoids getting into depth on the topics presented, to present the new concepts in assumption of the developer’s existing knowledge. Code samples are on book and exist mostly as snippets and very easy to follow. There are no downloadable examples. 3. Complexity The book is written in a very simple way and easy to follow. There are no irrelevant intimidating details. So it’s a book that you can grab and never put down until you’ve finished reading the entire book. 4. References The author includes reference links to blogs, Wikis and a lot of online resources including the MSDN documentation, which is a very convenient strategy to avoid flooding the reader with details which may not be of interest to them. Most sites do not use url routing and that is really not nice. There are notes from interviews between the author and people behind the new technologies, in which they explain what some specific areas that need clarifications and what their future views are in relation to the features they are working on. 5. Target The author targets experts that want to make a transition from .NET 3.5 to 4.0. Some obvious 3.5 features have been purposely excluded from the text 6. Overrall It is evident that the author has made extensive research into the breadth of what MS is working on, in relation to .NET and Visual Studio and has also been watching the online community. What I would like to see in the next edition are some details on OData protocol, Expression Blend 4 and Embedded development and Windows Phone development. I should say I’m one of the beneficiaries of this book. Excellent work Alex.   Technorati Tags: .NET,Book-Review,Visual Studio

    Read the article

  • Using NServiceBus behind a custom web service

    - by Michael Stephenson
    In this post I'd like to talk about an architecture scenario we had recently and how we were able to utilise NServiceBus to help us address this problem. Scenario Cognos is a reporting system used by one of my clients. A while back we developed a web service façade to allow line of business applications to be able to access reports from Cognos to support their various functions. The service was intended to provide access to reports which were quick running reports or pre-generated reports which could be accessed real-time on demand. One of the key aims of the web service was to provide a simple generic interface to allow applications to get any report without needing to worry about the complex .net SDK for Cognos. The web service also supported multi-hop kerberos delegation so that report data could be accesses under the context of the end user. This service was working well for a period of time. The Problem The problem we encountered was that reports were now also required to be available to batch processes. The original design was optimised for low latency so users would enjoy a positive experience, however when the batch processes started to request 250+ concurrent reports over an extended period of time you can begin to imagine the sorts of problems that come into play. The key problems this new scenario caused are: Users may be affected and the latency of on demand reports was significantly slower The Cognos infrastructure was not scaled sufficiently to be able to cope with these long peaks of load From a cost perspective it just isn't feasible to scale the Cognos infrastructure to be able to handle the load when it is only for a couple of hour window each night. We really needed to introduce a second pattern for accessing this service which would support high through-put scenarios. We also had little control over the batch process in terms of being able to throttle its load. We could however make some changes to the way it accessed the reports. The Approach My idea was to introduce a throttling mechanism between the Web Service Façade and Cognos. This would allow the batch processes to push reports requests hard at the web service which we were confident the web service can handle. The web service would then queue these requests and process them behind the scenes and make a call back to the batch application to provide the report once it had been accessed. In terms of technology we had some limitations because we were not able to use WCF or IIS7 where the MSMQ-Activated WCF services could have helped, but we did have MSMQ as an option and I thought NServiceBus could do just the job to help us here. The flow of how this would work was as follows: The batch applications would send a request for a report to the web service The web service uses NServiceBus to send the message to a Queue The NServiceBus Generic Host is running as a windows service with a message handler which subscribes to these messages The message handler gets the message, accesses the report from Cognos The message handler calls back to the original batch application, this is decoupled because the calling application provides a call back url The report gets into the batch application and is processed as normal This approach looks something like the below diagram: The key points are an application wanting to take advantage of the batch driven reports needs to do the following: Implement our call back contract Make a call to the service providing a call back url Provide a correlation ID so it knows how to tie each response back to its request What does NServiceBus offer in this solution So this scenario is not the typical messaging service bus type of solution people implement with NServiceBus, but it did offer the following: Simplified interaction with MSMQ Offered the ability to configure the number of processes working through the queue so we could find a balance between load on Cognos versus the applications end to end processing time NServiceBus offers retries and a way to manage failed messages NServiceBus offers a high availability setup The simple thing is that NServiceBus gave us the platform to build the solution on. We just implemented a message handler which functionally processed a message and we could rely on NServiceBus to do all of the hard work around managing the queues and all of the lower level things that would have took ages to write to any kind of robust level. Conclusion With this approach we were able to deal with a fairly significant performance issue with out too much rework. Hopefully this write up gives people some insight into ideas on how to leverage the excellent NServiceBus framework to help solve integration and high through-put scenarios.

    Read the article

  • Innovative SPARC: Lighting a Fire Under Oracle's New Hardware Business

    - by Paulo Folgado
    "There's a certain level of things you can do with commercially available parts," says Oracle Executive Vice President Mike Splain. But, he notes, you can do so much more if you design the parts yourself. Mike Splain,EVP, OracleYou can, for example, design cryptographic accelerators into your microprocessors so customers can run their networks fully encrypted if they choose.Of course, it helps if you've already built multiple processing "cores" into those chips so they can handle all that encrypting and decrypting while still getting their other work done.System on a ChipAs the leader of Oracle Microelectronics, Mike knows how implementing clever innovations in silicon can give systems a real competitive advantage.The SPARC microprocessors that his team designed at Sun pioneered the concept of multiple cores several years ago, and the UltraSPARC T2 processor--the industry's first "system on a chip"--packs up to eight cores per chip, each running as many as eight threads at once. That's the most cores and threads of any general-purpose processor. Looking back, Mike points out that the real value of large enterprise-class servers was their ability to run a lot of very large applications in parallel."The beauty of our CMT [chip multi-threading] machines is you can get that same kind of parallel-processing capability at a much lower cost and in a much smaller footprint," he says.The Whole StackWhat has Mike excited these days is that suddenly the opportunity to innovate is much bigger as part of Oracle."In my group, we used to look up the software stack and say, 'We can do any innovation we want, provided the only thing we have to change is what's in the Solaris operating system'--or maybe Java," he says. "If we wanted to change things beyond that, we'd have to go outside the walls of Sun and we'd have to convince the vendors: 'You have to align with us, you have to test with us, you have to build for us, and then you'll reap the benefits.' Now we get access to the entire stack. We can look all the way through the stack and say, 'Okay, what would make the database go faster? What would make the middleware go faster?'"Changing the WorldMike and his microelectronics team also like the fact that Oracle is not just any software company. We're #1 in database, middleware, business intelligence, and more."We're like all the other engineers from Sun; we believe we can change the world, if we can just figure out how to get people to pay attention to us," he says. "Now there's a mechanism at Oracle--much more so than we ever had at Sun."He notes, too, that every innovation in SPARC has involved some combination of hardware and softwareoptimization."Take our cryptography framework, for example. Sure, we can accelerate rapidly, but the Solaris OS has to provide the right set of interfaces that applications can tap into," Mike says. "Same thing with our multicore architecture. We have to have software that can utilize all those threads and run in parallel." His engineers, he points out, have never been interested in producing chips that sell as mere components."Our chips are always designed to go into systems and be combined with various pieces of software," he says. "Our job is to enable the creation of systems."

    Read the article

  • SharePoint 2010 release date - is it that important?

    - by CharlesLee
    There has been lots of excitement in the SharePoint community over the last few days as Microsoft have announced the official release date of SharePoint 2010. May 12th is the date for your diaries (RTM in April.) The twittersphere has been telling everyone for the last few days about this news and there is much excitement. The major conferences this year all seem to have a SharePoint 2010 focus and some are entirely focussed on the new product (e.g. SharePoint Evolution Conference.)  Now by all accounts Microsoft have plugged some significant functionality gaps that exist in WSS 3.0 and MOSS 2007 and provided some exciting new functionality.  You don't need me to tell you about these as the MVPs (and other community members) are doing a sterling job, after all that is why Microsoft has MVPs in the first place. Lets get real for a second though as there is a significant investment involved in moving to SharePoint 2010:  Firstly you need 64 bit architecture across the board, now for some environments that is no inconsequential hurdle, that's a pretty significant roadblock.   The development farm, test farm and UAT farm are all going to require the same infrastructure upgrades. To take advantage of the tooling for SP2010 you will need to upgrade to Visual Studio 2010 and your development team is going to require 64 bit hardware/OS too.  I would not recommend installing SP 2010 in client installation mode (i.e. for Windows 7) on your developer machines, I would use this for demo machines only. Something that lots of people seem to forget in all their whooping and hollering about the new release is that there is a large amount of end user training going to be required as the browser UI has now adopted the omnipotent ribbon interface and there are other new and more complicated features. SharePoint Designer has also entirely changed in both look and feel and some significant feature changes have taken place. Lest we should forget that some companies have not long upgraded to MOSS 2007 and are yet to see a significant ROI for that project. And the reticence that most companies feel about implementing v1 Microsoft products.  This is only the surface of the deeper issues which would be involved in any upgrade process, so I guess I share a small part of the concern voiced by Mark Miller of EndUserSharePoint.com.  Is SharePoint 2010 relevant? I don't share this sentiment in its entirety as I firmly believe that all companies should be looking at SharePoint 2010 from day one, however most large scale existing implementations of MOSS 2007 are going to be several years away from a serious upgrade project.  So should the conference organisers and the SharePoint community as a whole be a little more understanding of the real world issues?  It's easy to get carried away in the excitement of a new product and new tools to play with but there needs to be a focus on the real world issues that most people are facing day to day and at the moment and for the short term future (at the very least the next 12 months) that is fairly and squarely in the WSS 2.0/3.0 and SPS 2003/MOSS 2007 camps. Don't get me wrong, I am very very excited about getting to grips with SharePoint 2010 in the real world and I cannot wait for my first real project to come along, but for now I am just being realistic about the reality for most people who work with SharePoint. I have been spending a lot of time on www.sharepointoverflow.com recently as there is a community of people building up who are committed to answering the real world questions that folks are dealing with every day.  I urge you to take a look and either ask or answer some questions direct from the front line of the SharePoint world.

    Read the article

  • Silverlight Cream for January 30, 2011 - 2 -- #1038

    - by Dave Campbell
    In this Issue: Max Paulousky, Renuka Prasad, Ollie Riches, Jesse Liberty(-2-, -3-, -4-, -5-), Medusa M, John Papa, Beth Massi, and Joost van Schaik. Above the Fold: Silverlight: "Stop What You Are Doing And Learn About Reactive Programming" Jesse Liberty WP7: "Windows Phone Looping Selector for Digits " Max Paulousky Lightswitch: "How To Send HTML Email from a LightSwitch Application" Beth Massi Shoutouts: Shawn Wildermuch has niether GooNews for users of his cool WP7 app or or for the WP7 Marketplace in general: R.I.P. GooNews From SilverlightCream.com: Windows Phone Looping Selector for Digits Max Paulousky expanded on the Looping selector for some customization allowing him to display width/height metric measurement selectors... great job, Max! WP7 – How to Create a Simple Checked Listbox In Windows Phone 7 Renuka Prasad has the code for a nicely-working checked Listbox for WP7 on his blog... the post is the code... WP7Contrib: Network Connectivity Push Model Ollie Riches had a post last week that I'm just catching up to... about the 'push model' for network connectivity they produced in WP7 Contrib. Using the Camera in Windows Phone 7 Jesse Liberty has a bunch of posts up... I'm just going to bite the bullet and catch up! ... this 'From Scratch post 24 is all about the camera in your WP7 dev travails... and he makes it look so darned easy :) Linq and Fluent Programming Jesse Liberty's next post is 'From Scratch 25 and is all about Linq and Fluent Programming which started with a discussion at Codemash with Bill Wagner... wanna get a handle on fluent programming? ... check this out. Stop What You Are Doing And Learn About Reactive Programming Another item you might want to get your head around is Reactive Programming, or Rx... Jesse Liberty has a great post up discussing this, as his 'From Scratch post 26... good external links, and lots of commentary as well. Rx–Reactive Programming for Windows Phone Jesse Liberty's 'From Scratch 27 follows the previous on about Rx by taking the Rx show to the WP7 development arena. Want a solid Rx example... here ya go! Reactive Extensions–Observable Sequences are First Class Objects Finally catching up with Jesse Liberty (for now), I find this 'From Scratch number 28 which is again on Rx and WP7 dev, expanding on the example from the previous post by harnessing the power of Rx Localizing Silverlight applications Medusa M has a nice post up at dotnetslackers on localization in Silverlight. If you haven't had to do localization before, it can get to be a pain... understanding an article like this will get you part of the way to being pain-free. Silverlight TV 59: What Goes Into Baking Silverlight? Very cool presentation for those of you interested in the bits ... John Papa's Silverlight TV number 59 is up and he's chatting with Andy Rivas about the process followed getting the bits to us. How To Send HTML Email from a LightSwitch Application Beth Massi's latest Lightswitch post is on sending HTML Email via SMTP from Lightswitch, and then follows that up with sending Email via Outlook automation. ViewModel driven animations using the Visual State Manager, DataStateBehavior and Expression Blend After some good user feedback, Joost van Schaik decided to make some modifications to his WP7 app, and got involved in a Page Title collapse animation driven from the ViewModel. Check out the nice write-up, video, external links, and source... all good! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Tough Decisions

    - by Johnm
    There was once a thriving business that employed two Database Administrators, Sam and Jim. Both DBAs were certified, educated and highly talented in their skill sets. During lunch breaks these two DBAs were often found together discussing best practices, troubleshooting techniques and the latest release notes for the upcoming version of SQL Server. They genuinely loved what they did. The maintenance of the first database was the responsibility of Sam. He was the architect of this server's setup and he was very meticulous in its configuration. He regularly monitored the health of the database, validated backup files and regularly adhered to the best practices that were advocated by well respected professionals. He was very proud of the fact that there was never a database that he managed that lost data or performed poorly. The maintenance of the second database was the responsibility of Jim. He too was the architect of this server's setup. At the time that he built this server, his understanding of the finer details of configuration were not as clear as they are today. The server was build on a shoestring budget and with very little time for testing and implementation. Jim often monitored the health of the database; but in more of a reactionary mode due to user complaints of slowness or failed transactions. Deadlocks abounded and the backup files were never validated. One day, the announcement was made that revealed that the business had hit financially hard times. Budgets were being cut, limitation on spending was implemented and the reduction in full-time staff was required. Since having two DBAs was regarded a luxury by many, this meant that either Sam or Jim were about to find themselves out of a job. Sam and Jim's boss, Frank, was faced with a very tough decision. Sam's performance was flawless. His techniques and practices were perfection. The databases he managed were reliable and efficient. His solutions are "by the book". When given a task it is certain that, while it may take a little longer, it will be done right the first time. Jim's techniques and practices were not perfect; but effective and responsive. He made mistakes regularly; but he shows that he learns from them and they often result in innovative solutions. When given a task it is certain that, while the results may require some tweaking, it will be done on time and under budget. You are Frank's best friend. He approaches you and presents this scenario. He must layoff one of his valued DBAs the very next morning. Frank asks you: "All else being equal, who would you let go? and Why?" Another pertinent question is raised: "Regardless of good times or bad, if you had to choose, which DBA would you want on your team when tough challenges arise?" Your response is. (This is where you enter a comment below)

    Read the article

  • SQL SERVER – Free Print Book on SQL Server Joes 2 Pros Kit

    - by pinaldave
    Rick Morelan and I were discussing earlier this month that what we can give back to the community. We believe our books are very much successful and very well received by the community. The five books are a journey from novice to expert. The books have changed many lives and helped many get jobs as well pass the SQL Certifications. Rick is from Seattle, USA and I am from Bangalore, India. There are 12 hours difference between us. We try to do weekly meeting to catch up on various personal and SQL related topics. Here is one of our recent conversations. Rick and Pinal Pinal: Good Morning Rick! Rick: Good Morning…err… Good Evening to you – Pinal! Pinal: Hey Rick, did you read the recent email which I sent you – one of our reader is thanking us for writing Joes 2 Pros series. He wants to dedicate his success to us. Can you believe it? Rick: Yeah, he is very kind but did you tell him that it is all because of his hard work on learning subject and we have very little contribution in his success. Pinal: Absolutely, I told him the same – I said we just wrote the book but it is he who learned from it and proved himself in his job. It is all him! We were just igniters. Rick: Good response. Pinal: Hey Rick! Are we doing enough for the community? What can we do more? Rick: Hmmm… Let us do something more. Pinal: Remember once we discussed the idea of if anyone who buys our Joes 2 Pros Combo Kit in the next 2 weeks – we will send them SQL Wait Stats for free. What do you say? Rick: I agree! Great Idea! Let us do it. Free Giveaway Well Rick and I liked the idea of doing more. We have decided to give away free SQL Server Wait Stats books to everybody who will purchase Joes 2 Pros Combo Kit between today (Oct 15, 2012) and Oct 26, 2012. This is not a contest or a lucky winner opportunity. Everybody who participates will qualify for it. Combo Availability USA – Amazon India - Flipkart | Indiaplaza Note1: USA kit contains FREE 5 DVDs. India Kit does not contain 5 DVDs due to legal issues. Note2: Indian Kit is priced at special Indian Economic Price. Qualify for Free Giveaway You must have purchased our Joes 2 Pros Combo Kit of 5 books between Oct 15, 2012 and Oct 26, 2012. Purchase before Oct 15, 2012 and after Oct 26, 2012 will not qualify for this giveaway. Send your original receipt (email, order details) to following addresses: “[email protected];[email protected]” with the subject line “Joes 2 Pros Kit Promotion Free Offer”. Do not change the subject line or your email may be missed.  Clearly mention your shipping address with phone number and pin/zip code. Send your receipt before Oct 30, 2012. We will not entertain any conversation after Oct 30, 2012 cut off date. The Free books will be sent to USA and India address only. Availability USA - Amazon | India - Flipkart | Indiaplaza Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLServer, T SQL, Technology

    Read the article

  • Silverlight Cream for January 26, 2011 -- #1036

    - by Dave Campbell
    In this all-submittal Issue: XamlNinja, Kevin Dockx, Steve Wortham, Andrea Boschin, Mick Norman, Colin Eberhardt, and Rudi Grobler(-2-, -3-, -4-, -5-). Above the Fold: Silverlight: "Getting an invalid cross-thread exception in Silverlight?" Kevin Dockx WP7: "WP7 Contrib – the last messenger" XamlNinja ISO: "How many files are too many files for isolated storage?" Mick Norman Shoutouts: Telerik announced a free WP7 Webinars series that you probably don't want to miss: Join Us for the Special Free Windows Phone 7 Webinars Series. Guest lecturers - Shawn Wildermuth and Mark Arteaga From SilverlightCream.com: WP7 Contrib – the last messenger XamlNinja has a great post up extending Laurent's IMessenger to deal with a tricky issue of trying to fire a message from one VM to another even if the 2nd VM isn't alive yet... oh, and this is in WP7Contrib, so go grab it! Getting an invalid cross-thread exception in Silverlight? Kevin Dockx has a solution to a problem we've all had... the 'invalid cross-thread exception' ... and the solution is even for those of us trying to do this in a VM... cool and easy solution, Kevin! Mastering Storyboards One Mistake at a Time Steve Wortham is back with a tutorial with a great title :) ... check out the progression from one success to another in this picture/title viewer ... don't miss the very end where he has the control rolled up into a CaptionedImageHyperlink, and a link to download it! Windows Phone 7 - Part #2: Your First Application Andrea Boschin has part 2 of his SilverlightShow WP7 series up. Lots of good intro material here on the manifest file and app.xaml ... he even gets into the ApplicationBar, phone orientation, and the Metro theme. How many files are too many files for isolated storage? Mick Norman alerted me to his blog early this morning, and this is his latest post... interesting tests of how many files are too many for ISO on your WP7... and I have to admit... he's stuffing a boatload of them out there in these tests! ... great info Mick! and thanks for the links. A Navigator Control For Visiblox Time Series Charts Colin Eberhardt's latest post is about creating an interactive navigator for large time series datasets in Visiblox charts.... check the images at the top of the post, and it'll be obvious :) ... very cool stuff. MVVM Frameworks with WP7 support Rudi Grobler has been very busy and if you check the dates, these posts are all in a day or two! This first highlights two contenders for MVVM on WP7: Caliburn and MVVMLight... both well-supported... quick intro to each followed by good links out to the author's sites Reading barcodes from your WP7 device Rudi Grobler also has a cool post up on reading barcodes with your WP7... he's using the ZXing Barcode Scanning Library, and makes quick work of the job. Taking Sterling for a Test-Drive Rudi Grobler has a quick intro to Sterlink, Jeremy Likness' ISO database for Silverlight up... quickly taking care of writing and reading back data. SQLite on WP7 After his discussion of Sterling, Rudi Grobler is now demonstrating the use of SQLite that has been ported to WP7. Check out his demo code... looks pretty easy to use. Hacking the WP7 Camera (The basics) Rudi Grobler's latest post is on getting direct access to the camera on WP7... be sure to do all the downloads and check out the external links he has. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Exceptional DBA 2011 Jeff Moden on why you should enter in 2012

    - by RedAndTheCommunity
    My "reign" as the Red Gate Exceptional DBA is almost over and I was asked to say a few words about this wonderful award. Having been one of those folks that shied away from entering the contest during the first 3 years of the award, I thought I'd spend the time encouraging DBAs of all types to enter. Winning this award has some obvious benefits. You win a trip to PASS including money towards your flight, paid hotel stay, and, of course, paid admission. You win a wonderful bundle of software from Red Gate to make your job as a DBA a whole lot easier. You also win some pretty incredible notoriety for your resume. After all, it's not everyone who wins a worldwide contest. To date, there are only 4 of us in the world who have won this award. You could be number 5! For me, all of that pales in comparison to what I found out during the entry process. I'm very confident in my skills, but I'm also humble. It was suggested to me that I enter the contest when it first started. I just couldn't bring myself to nominate myself. When the 2011 nomination period opened up, several people again suggested that I enter, so I swallowed hard and asked several co-workers to have a look at the online nomination form and, if they thought me worthy, to write a nomination for me. I won't bore you with the details, but what they wrote about me was one of the most incredible rewards that I could ever have hoped to receive. I had no idea of the impact that I'd made on my co-workers. Even if I hadn't made it to the top 5 for the award, I had already won something very near and dear that no one can ever top. "Even if I hadn't made it to the top 5 for the award, I had already won something very near and dear that no one can ever top." There's only one named winner and 4 "runners up" in this competition every year but don't let that discourage you. Enter this competition. Even if you work in the proverbial "Mom'n'Pop" shop, get your boss and the people you work with directly to nominate you. Even if you don't make it to the top 5, you might just find out that you're more of a winner than you think. If you're too proud to ask them, then take the time to nominate yourself instead of shying away like I did for the first 3 years. You work hard as a DBA and, as David Poole once said, if you're the first person that people ask for help rather than one of the last, then you're probably an Exceptional DBA. It's time to stand up and be counted! Win or lose, the entry process can be a huge reward in itself. It was for me. Thank you, Red Gate, for giving me such a wonderful opportunity. Thanks for listening folks and for all that you do as DBAs. As 'Red Green' says, "We're all in this together and I'm pullin' for ya". --Jeff Moden Red Gate Exceptional DBA 2011

    Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >