Search Results

Search found 9980 results on 400 pages for 'kernel extension'.

Page 273/400 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

  • Recovering from 'grub rescue>' crash

    - by DocSalvage
    I did a dumb thing... I forgot that Ubuntu 10.04 (Lucid) switched to Grub2 which puts a ton of *.mod files (kernel modules) in /boot/grub. I thought they were soundtrack files put there erroneously and moved them. Needless to say, the next reboot was traumatic. I was presented with something I had no memory of ever seeing... a 'grub rescue' prompt. With the help of how-to-fix-error-unknown-filesystem-grub-rescue however, I was able to recover... Discovered that Grub Rescue does not have 'cd', 'cp' or any other filesystem commands except its own variation of 'ls'. So first I had to find the partition with the /boot directory containing vmlinuz... and other boot image files... (failed attempts not shown) grub rescue> ls (hd0,4) (hd0,3) (hd0,2) (hd0,1) grub rescue> ls (hd0,2)/boot ... grub ... initrd.img-2.6.32-33-generic ... vmlinuz-2.6.32-33-generic Then manually boot from 'grub rescue' prompt (no command history either!)... grub rescue> set root=(hd0,2)/boot grub rescue> insmod linux grub rescue> linux (hd0,2)/boot/vmlinuz-2.6.32-33-generic grub rescue> initrd (hd0,2)/boot/initrd.img-2.6.32-33-generic grub rescue> boot This boots and crashes to the BusyBox prompt which DOES have some rudimentary filesystem commnds. Then I moved the *.mod files back to the /boot/grub directory... busybox> cd /boot busybox> mv mod/* grub busybox> reboot The reboot was successful but that was a lot of work. Is there an easier way?

    Read the article

  • BCM4306, b43 legacy driver installed, but "firmware missing" error

    - by ScrollerBlaster
    I have the following wireless hardware on a Compaq evo N600c laptop running lubuntu latest. ciaran@compaq:~$ lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Following the instructions from here : http://www.linuxwireless.org/en/users/Drivers/b43#b43_and_b43legacy I opted for the legacy firmware installer, following instructions for internet install to the letter (with no errors). i.e. I successfully installed sudo apt-get install firmware-b43legacy-installer In the nm-applet I now get Wireless networks device not ready (firmware missing) I open up Additional Drivers, but the list is empty. I have commented out this line in /etc/modprobe.d/blacklist.conf #blacklist bcm43xx Contents of firmware dir: ciaran@compaq:/etc/modprobe.d$ sudo ls /lib/firmware/b43legacy/ [sudo] password for ciaran: a0g0bsinitvals2.fw a0g0initvals5.fw b0g0bsinitvals2.fw b0g0initvals5.fw ucode11.fw ucode5.fw a0g0bsinitvals5.fw a0g1bsinitvals5.fw b0g0bsinitvals5.fw pcm4.fw ucode2.fw a0g0initvals2.fw a0g1initvals5.fw b0g0initvals2.fw pcm5.fw ucode4.fw Edit: from dmesg: [ 4460.193382] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 4460.193393] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 4460.193401] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. Yours in hope.

    Read the article

  • ASP.NET: Serializing and deserializing JSON objects

    - by DigiMortal
    ASP.NET offers very easy way to serialize objects to JSON format. Also it is easy to deserialize JSON objects using same library. In this posting I will show you how to serialize and deserialize JSON objects in ASP.NET. All required classes are located in System.Servicemodel.Web assembly. There is namespace called System.Runtime.Serialization.Json for JSON serializer. To serialize object to stream we can use the following code. var serializer = new DataContractJsonSerializer(typeof(MyClass)); serializer.WriteObject(myStream, myObject); To deserialize object from stream we can use the following code. CopyStream() is practically same as my Stream.CopyTo() extension method. var serializer = new DataContractJsonSerializer(typeof(MyClass));   using(var stream = response.GetResponseStream()) using (var ms = new MemoryStream()) {     CopyStream(stream, ms);     results = serializer.ReadObject(ms) as MyClass; } Why I copied data from response stream to memory stream? Point is simple – serializer uses some stream features that are not supported by response stream. Using memory stream we can deserialize object that came from web.

    Read the article

  • CodePlex Daily Summary for Tuesday, October 30, 2012

    CodePlex Daily Summary for Tuesday, October 30, 2012Popular ReleasesCleverBobCat: CleverBobCat 0.4: Added: ModuleCleverResourceTransferMCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...ZXMAK2: Version 2.6.8.0: Whats new: add Spectrum +3 model; tape serializer: show extended info for crc bad blocksMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.03: changes FIXED: Kitty-Kats new Forum UrlJobboard Light Edition: Version 2.2: Major Release Parallalization Added Job posting now working Job Editing now working Search Box Clear Filters added Search criteria updated (more simple) jobdetails page displays missing selections parameters added to url Cleaned UI moreMJP's DirectX 11 Samples: MSAA Resolve Filtering: Sample application and source code from the article "Experimenting with Reconstruction Filters for MSAA Resolve" http://mynameismjp.wordpress.com/2012/10/28/msaa-resolve-filters/Liberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1025.5): [NEW] Support for connecting to CRM Online via Office 365 (OSDP) [NEW] Current connection information and loaded ribbon name are displayed in the status bar [IMPROVED] Connect dialog minor improvements and error message descriptions [IMPROVED] Connecting to a CRM server will close currently loaded ribbon upon confirmation (if another ribbon was loaded previously) [FIX] Fixed bug in Open Ribbon dialog which would not allow to refresh entity list more than onceNew Projects10010dshjlahfajhflkjhkjhherkjhfkja: 10010dshjlahfajhflkjhkjhherkjhfkjaA supplementary Machine Learning and Evolutionary Computation suite for Orange: ML & EC tools such as: - Optimization Meta-heuristics (EDAs, cGA) - Feature Selection - Kernel Methods - Dependency NetworksATH TaskList 2012: ATH TaskList 2012Canlipe: This is a simple C# / Mono (.NET) static blog generator. Nothing fancy, just the basic functionality at the moment. The code is really dirty too.com.sogeti.certif: Basic but essential source code example for SharePoint 2010Duhking: A quasi-duck typing library for .Net. It doesn't provide "real" duck typing, but it kinda looks a little bit like a duck if you squint and look at it from a distance. This library is built on and for .Net 3.5,Guestbook 2: A highly customizable program to track people visiting a booth via recording their name and some basic information. Written in C#.Interval Mandelbrot Explorer: Explore the Mandelbrot set using interval arithmetic.Isel - Projecto: projecto para isel....killStudentMain: killStudentMainKWSystem-WithClient: c++??La villa del seis: La villa del seis is a multiplatform point-and-click graphical adventure. Also, you can play it like a text adventure (interactive fiction) on a text browser (like Links, w3m or Lynx) or in a normal browser without JavaScript support.malversuchen: Das ist ein TEstPhotoCloud: This is a sample ASP.NET Web Pages app that uses Twitter authentication, HTMl5 drag and drop file uploading, blob storage, and SignalR to build a photo sharing platnosci-test: testSharePoint GSC: SharePoint GSC is a set of SharePoint utilities developed in General de Software. SHCODE: SH Project please contact little_deer@hotmail.com for more details.SimpleImageCacherRT: WinRT????????????????????。Windows.UI.XAML.Controls.Image????Source?????????????????????。???????????????…SLIP Framework: SilverLightweight Prism FrameworkSmallCheck: F# exhaustive testing framework. Port of Haskell SmallCheck test librarySolution organizer: Help developers organizing their Visual Studio 2010 solutionsSukul: Web 2.0 Portal for powering modern CMStestjabbr1029: heTFS Reflect Work Items Links: This small utility allows complex TFS to TFS migration to preserve work item links during the process. It is used in complement with the TFS Integration tools.XactiSource Application Framework: The XactiSource Application Framework is an attempt to add basic functionality that can be used from one project to the next. Yasminoku: Yasminoku is an open source "Sudoku" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse. Includes sudoku solver. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.Zalgo for Word: Zalgo addin for Word 2010

    Read the article

  • Cannot set monitor to native resolution

    - by S B
    problem is similar to so many other users, but solutions found do not work. Background: Fresh install of 12.04 (completely updated) on a Fit-PC2 (specs). Read in several places that the new 3.X kernel that 12.04 runs on has a new psb_gfx driver which supports the gma500 graphics card (poulsbo chipset). All's pretty much working (there are some glitches which are documented, so I won't raise them here), except for the screen resolution. My native monitor resolution is 1920X1080, but all I get is 1024x768. Output running xrandr: xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0* Although I read that Ubuntu does not come with an xorg.conf file anymore, I also tried running sudo X :1 -configure, and here's the end of the output: Number of created screens does not match number of detected devices. Configuration failed. When I look in the xorg.conf.new file created in my home directory, it seems that for some reason X thinks I have two screens. Don't know what to do with that. Ideas anyone? Thanks for your time.

    Read the article

  • Remap keyboard Ubuntu 12.04; Asus Q500A

    - by hydroxide
    I have an Asus Q500A with win8 and Ubuntu 12.04 64 bit; linux kernel 3.8.0-32-generic. I am using gnome-panel, and xserver-xorg-lts-raring. I have been experiencing problems with the keyboard short-cuts since I had a fresh install. fn+f10 is supposed to mute my system, but instead it will repeatedly press d. fn+f11 is volume down, but it presses c. fn+f12 is volume up, presses b repeatedly. Most of the other on-board short-cuts such as adjusting screen and led brightness work most of the time, but sometimes press other letters repeatedly. Also, sometimes my cntr gets held down for no reason. Everything works fine in windows. I have tried installing all recommends and sudo dpkg-reconfigure -a to reconfigure all packages, which did not solve my problem. I have tried using KeyTouch editor to edit keymaps, navigating to /usr/shar/x11/xkb/keymap when I try opening any of these files it says file contains no keyboard element. I think If I were just able to remap my keyboard it might solve my issues, otherwise if anyone knows where I can get asus drivers for 12.04 please let me know Apparently I didn't have all repositories enabled. I executed the following commands and am trying the updates they give me. Getting linux_kernel 3.8.0-33 generic as well as a bunch of other packages. sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) universe" sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) main universe restricted multiverse" sudo add-apt-repository "deb http://archive.canonical.com/ubuntu $(lsb_release -sc) partner"

    Read the article

  • How to Properly Make use of Codeigniter's HMVC

    - by Branden Stilgar Sueper
    I have been having problems wrapping my brain around how to properly utilize the modular extension for Codeigniter. From what I understand, modules should be entirely independent of one another so I can work on one module and not have to worry about what module my teammate is working on. I am building a frontend and a backend to my site, and am having confusion about how I should structure my applications. The first part of my question is should I use the app root controllers to run modules, or should users go directly to the modules by urls? IE: in my welcome.php public function index() { $this->data['blog'] = Modules::run( 'blog' ); $this->data['main'] = Modules::run( 'random_image' ); $this->load->view('v_template', $this->data); } public function calendar() { $this->data['blog'] = Modules::run( 'blog' ); $this->data['main'] = Modules::run( 'calendar' ); $this->load->view('v_template', $this->data); } My second part of the question is should I create separate front/back end module folders -config -controllers welcome.php -admin admin.php -core -helpers -hooks -language -libraries -models -modules-back -dashboard -logged_in -login -register -upload_images -delete_images -modules-front -blog -calendar -random_image -search -views v_template.php -admin av_template.php Any help would be greatly appreciated.

    Read the article

  • CodePlex Daily Summary for Friday, October 19, 2012

    CodePlex Daily Summary for Friday, October 19, 2012Popular ReleasesOrchard Project: Orchard 1.6 RC: RELEASE NOTES This is the Release Candidate version of Orchard 1.6. You should use this version to prepare your current developments to the upcoming final release, and report problems. Please read our release notes for Orchard 1.6 RC: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you wil...Rawr: Rawr 5.0.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...TFS 2012 Server/service Setup for Demo: TfsDemo_1.0.0.2: Release 1.0.0.2 New Stuff Feature 1 - Now add team favorite queries using the Tfs demo setup application. Simply specify the name of the work item query in the demoConfig.xml file and let the application work its magic. Feature 2 - Exclude the sections you do not want to be run as part of the demo. Mark the sections you don't want to run during the demo with the attribute Run="false" in the demoConfig.xml. Bug Fix 1 - If the DemoConfig.xml contains users or email addresses in work item a...XamlImageConverter: Xaml Image Converter 3.2: VisualStudio Integration Installer is now a VSIX Extension.Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.Visual Studio Team Foundation Server Branching and Merging Guide: v2.1 - Visual Studio 2012: Welcome to the Branching and Merging Guide What is new? The Version Control specific discussions have been moved from the Branching and Merging Guide to the new Advanced Version Control Guide. The Branching and Merging Guide and the Advanced Version Control Guide have been ported to the new document style. See http://blogs.msdn.com/b/willy-peter_schaub/archive/2012/10/17/alm-rangers-raising-the-quality-bar-for-documentation-part-2.aspx for more information. Quality-Bar Details Documentatio...D3 Loot Tracker: 1.5.5: Compatible with 1.05.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...WPUtils: WPUtils 1.3: Blend SDK for Silverlight provides a HyperlinkAction which is missing in Blend SDK for Windows Phone. This release adds such an action which makes use of WebBrowserTask to show web page. You can also bind the hyperlink to your view model. NOTE: Windows Phone SDK 7.1 or higher is required.Windawesome: Windawesome v1.4.1 x64: Fixed switching of applications across monitors Changed window flashing API (fix your config files) Added NetworkMonitorWidget (thanks to weiwen) Any issues/recommendations/requests for future versions? This is the 64-bit version of the release. Be sure to use that if you are on a 64-bit Windows. Works with "Required DLLs v3".CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Global Stock Exchange (Hobby Project): Global Stock Exchange - Invst Banking (Hobby Proj): Initial VersionMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature (for Professional and Entreprise Editions) UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring release of a nugget package to help developers speed up development http://nuget.org/packages/Magelia.Webstore.Client optimization of the data update mechanism (a.k.a. "burst") Performance improvment of the d...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...VFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.Droid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): NOTE: This is development release and not recommended for production use. This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.NDatabase - C# Lightweight Object Database: NDatabase 2.0.1 Release: This release contains stable version of NDatabase C# Lightweight Object Database Content: binaries (dll + pdb) sources (sources, unit tests, samples) Changes: namespaces, dll name both are changed to NDatabase2 query API is changed. Now it is using generics in every possible place changing the way, how fields from class are stored - for now they are ordered by name which allows db on working well even if someone will change the order of fields in class definition (BREAKING CHANGE) A...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...New Projects7COM0207 DIY Wedding Cake: DIY Wedding Cake SiteAnt: AntCms.ArduUtilityLibrary for Arduino: ArduUtilityLibrary (AUL) is a library to assist the development of Arduino based programsbelloscoursework: Coursework to create a a web 2.0 website that support content creation.Code Jumper: Code-Jumper allows you to navigate your code by displaying a map of your declarations on the side panel of your editor. Dean's Web Scripting & Content Creation Project: Web Scripting & Content Creation Project for MSc Computer Science at Herts University.Distributed System for Medical Providers: This is a draft circulated for medical supplies providerDockPanel Suite VS2012 Look: Dock Panel Suite Control C# Visual Studio 2012 Design LookEntity Framework Json Serializer: Solve the Circular Reference problem when using Entity Framework with Asp.NET MVC JsonResult.ExpressGrid: A javascript gridFimClient: Our library - Predica.FimCommunication - for talking to FIM (Forefront Identity Manager) web servicesGetDev.NET - Mvc Talk: Sample code for local user group talk about ASP.NET MVCHelp Desk: Sistema para teste do mvc 3HospitalManagementSystem: Summary This system is for -handle channeling -handle lab reportsjQuery Filedrop: In this demo I will demonstrate using HTML5 compatible browsers to drag and drop files and save the content into a SQL2012 database. JS DNN Task Manager: This is a DNN tutorial to create a task manager projectKinect - Finger and gesture recognition: Find fingertips and pointing direction, record and recognize finger gestures. All this with the depth stream from the Kinect sensor.MarkusUtility: Utilities used in other projectsMASSIVE DATA TRANSFER OPTIMIZATIONS: This is project is used find an efficient way to transfer the massive data via TCP/IP. Minesweeper by S. Joshi: A user-created version of Minesweeper.NETFOX CATAN: very goodPrestazioni e affidabilità: Progetto di prestazioni ed affidabilità del corso di informatica, università Ca' Foscari di VeneziaProyecto Mammut: Este es un proyecto cuyo objetivo es georeferenciar la oferta commercial de la ciudad de Manta,Ecuador mediante puntos de referencias basados en T. Público.Razor Exercise 1: Just an exercise....Sannel Helpers: Varies extension methods I have created.Service Pipeline: A simple library for implementing a service pipeline with your existing service contracts.Set Last Access: Simple console client which can scans folder tree and set LastAccess time by times of newest item in folderSharePoint Web Part Replacement: A set of classes and sample feature receiver used to replace web parts on a SharePoint site collection (SPSite). Sitecore Image Placeholder: Sitecore Image Placeholder module helps Content Editors by displaying placeholders with correct image size when field of type Image is empty.SlidePuzzle: A slide puzzle.StackAttack: StackAttack is a .NET client for use with the Stack Exchange API v2.1.testASPsite: Nothing of interesttestdd18102012git01: dtestdd18102012tfs02: stestddgit10182012git03: tTransform Manager Task for creating assets in Windows Azure Media Services: Task for Transform Manager that creates assets in Windows Azure Media Services and requests a stream locator. Used to push assets into the cloud for streaming.Trie for C#: Implementing the Trie structer in C#/.Netwsccm11aah: My Project for Web Scripting and Content Creation module submitted to Steve Bennet and Mariana Lilleywuggi: Wuggi is a simple website that focuses on its users input to enrich its content. Discussions and feedback are always welcomed on Wuggi.YahtzeePC: A Yahtzee emulator for the PC.

    Read the article

  • How can create the smallest possible mirror of the archive?

    - by Registered User
    I need to create an http url at my laptop to have a Ubuntu installation begin within my laptop on a Xen environment. This is how the final thing will look like. The host and client are both going to be my laptop, I Googled and came across apt-mirror and some other packages. I do not want to archive entire 15 GB Ubuntu repositories on my machine. It is not possible to use a CD,ISO,loop mounted disk (reason mentioned below). I have tried using netboot image on local machine which failed because if you are attempting to create a virtual machine on a hardware which does not support VT virt-manager installer necessarily needs a URL of this sort http://archive.ubuntu.com/ubuntu/dists/hardy/main/installer-i386/current/images/netboot/ Any other option to create guest OS is simply grayed out. The unfortunate part is my Ethernet connections do not work when I boot with Xen-4.0 and a pv-ops Dom0 kernel from Jeremy's tree. Which is where I have to do this work. So I have to create a URL structure which is similar to Ubuntu mirrors. So how can I do this in bare minimum so that at least the console boots and once the console comes I can do some work.

    Read the article

  • Why does 'top' say my machine is only 50% idle?

    - by Chris Moore
    What's going on here? I'm running nothing on the system, iotop and iftop show the network and hard drive are both idle, and top (sorted by %CPU) shows nothing running. So why is the system only 50% idle? What's the other 50% waiting for? How can I find out? top - 12:01:05 up 3 days, 15:03, 1 user, load average: 6.00, 6.01, 6.05 Tasks: 179 total, 1 running, 178 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.0%sy, 0.0%ni, 49.7%id, 49.7%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2053996k total, 1992600k used, 61396k free, 81680k buffers Swap: 4092924k total, 10740k used, 4082184k free, 1338636k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1042 deb 20 0 21468 1412 1000 R 1 0.1 0:00.03 top 1 root 20 0 24188 1952 1152 S 0 0.1 0:01.44 init 2 root 20 0 0 0 0 S 0 0.0 0:00.05 kthreadd Update: dmesg shows the printer driver misbehaving: [28858.561847] cnijnetprn[1503]: segfault at 29 ip 00007f56cf3480f7 sp 00007fffb964ec30 error 4 in libcnnet.so.1.2.0[7f56cf345000+9000] [68851.187802] cnijnetprn[9180]: segfault at 29 ip 00007ffe7636a0f7 sp 00007fff9a8b1990 error 4 in libcnnet.so.1.2.0[7ffe76367000+9000] [155412.107826] cnijnetprn[19966]: segfault at 29 ip 00007fc31de770f7 sp 00007fffc03aa8e0 error 4 in libcnnet.so.1.2.0[7fc31de74000+9000] and also some issue with cp: [248041.172067] INFO: task cp:27488 blocked for more than 120 seconds. [248041.172071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [248041.172075] cp D ffffffff81805120 0 27488 27345 0x00000004 [248041.172080] ffff880078d57a38 0000000000000046 ffff880078d579d8 ffffffff81032a79 [248041.172085] ffff880078d57fd8 ffff880078d57fd8 ffff880078d57fd8 0000000000012a40 [248041.172090] ffff88007b818000 ffff880069acc560 ffff880078d57a18 ffff88007f8532c0 [248041.172095] Call Trace: [248041.172104] [<ffffffff81032a79>] ? default_spin_lock_flags+0x9/0x10 [248041.172109] [<ffffffff8110a360>] ? __lock_page+0x70/0x70 [248041.172114] [<ffffffff815f0ecf>] schedule+0x3f/0x60 I did try copying something to the USB stick that's plugged into the router and mounted onto this computer using mount.cifs. That almost always causes everything to lock up, so I'm guessing that's the problem. I'll reboot and stop using mount.cifs.

    Read the article

  • Open World Session - BPM, SOA and ADF Combined:Patterns learned from Fusion Applications

    - by mesriniv
    Blog by Meera Srinivasan (Oracle Product Management) Today afternoon (10/2/2012), Mohan Kamath, and I (Meera Srinivasan) delivered an Open World session on how Oracle Fusion Applications (the next generation business applications from Oracle), use Oracle BPM, Oracle SOA and Oracle ADF products. These adoption patterns can be applied in a generic manner to produce process-centric, user-centric, highly customizable and extensible next generation application. The session was well attended and we had lively discussions with the attendees during Q & A. We started with why as an application developer, you should look at BPM for creating a process-centric application and presented the following fusion adoption patterns Model driven agile development Customization and Extension Guided Process Interactions Personalization and Customization of End User Interfaces Approval Flows Fusion HCM, On Boarding Process - Activity Guide Interface was used as an example for the Guided Process Interactions adoption pattern and the Fusion CRM BPM Process Templates for Customization adoption pattern. In the Personalization and Customization of End User Interfaces section, we looked at how ADF is used within Oracle BPM and the various options available to customize end user interfaces. We also presented how Oracle Procurement does complex approvals using Rules and Approval Management Extensions. We hope you found the session useful, and please do try to attend Heidi’s session on dynamic case management: Case Management Patterns with Oracle Unified Business Process Management Suite. Marriott Marquis - Salon 7, Thu 11:15 AM - 12:15 PM

    Read the article

  • Be liberal in what you accept... or not?

    - by Matthieu M.
    [Disclaimer: this question is subjective, but I would prefer getting answers backed by facts and/or reflexions] I think everyone knows about the Robustness Principle, usually summed up by Postel's Law: Be conservative in what you send; be liberal in what you accept. I would agree that for the design of a widespread communication protocol this may make sense (with the goal of allowing easy extension), however I have always thought that its application to HTML / CSS was a total failure, each browser implementing its own silent tweak detection / behavior, making it near impossible to obtain a consistent rendering across multiple browsers. I do notice though that there the RFC of the TCP protocol deems "Silent Failure" acceptable unless otherwise specified... which is an interesting behavior, to say the least. There are other examples of the application of this principle throughout the software trade that regularly pop up because they have bitten developpers, from the top off my head: Javascript semi-colon insertion C (silent) builtin conversions (which would not be so bad if it did not truncated...) and there are tools to help implement "smart" behavior: name matching phonetic algorithms (Double Metaphone) string distances algorithms (Levenshtein distance) However I find that this approach, while it may be helpful when dealing with non-technical users or to help users in the process of error recovery, has some drawbacks when applied to the design of library/classes interface: it is somewhat subjective whether the algorithm guesses "right", and thus it may go against the Principle of Least Astonishment it makes the implementation more difficult, thus more chances to introduce bugs (violation of YAGNI ?) it makes the behavior more susceptible to change, as any modification of the "guess" routine may break old programs, nearly excluding refactoring possibilities... from the start! And this is what led me to the following question: When designing an interface (library, class, message), do you lean toward the robustness principle or not ? I myself tend to be quite strict, using extensive input validation on my interfaces, and I was wondering if I was perhaps too strict.

    Read the article

  • Chrome "refusing to execute script"

    - by TestSubject528491
    In the head of my HTML page, I have: <script src="https://raw.github.com/cloudhead/less.js/master/dist/less-1.3.3.js"></script> When I load the page in my browser (Google Chrome v 27.0.1453.116) and enable the developer tools, it says Refused to execute script from 'https://raw.github.com/cloudhead/less.js/master/dist/less-1.3.3.js' because its MIME type ('text/plain') is not executable, and strict MIME type checking is enabled. Indeed, the script won't run. Why does Chrome think this is a plaintext file? It clearly has a js file extension. Since I'm using HTML5, I omitted the type attribute, so I thought that might be causing the problem. So I added type="text/javascript" to the <script> tag, and got the same result. I even tried type="application/javascript" and still, same error. Then I tried changing it to type="text/plain" just out of curiosity. The browser did not return an error, but of course the JavaScript did not run. Finally I thought the periods in the filename might be throwing the browser off. So in my HTML, I changed all the periods to the URL escape character %2E: <script src="https://raw.github.com/cloudhead/less%2Ejs/master/dist/less-1%2E3%2E3.js"></script> This still did not work. The only thing that truly works (i.e. the browser does not give an error and the JS successfully runs) is if I download the file, upload it to a local directory, and then change the src value to the local file. I'd rather not do this since I'm trying to save space on my own website. How do I get the Chrome to recognize that the linked file is actually a javascript type?

    Read the article

  • Cannot ping router with a static IP assigned?

    - by Uriah
    Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

    Read the article

  • Netcat I/O enhancements

    - by user13277689
    When Netcat integrated into OpenSolaris it was already clear that there will be couple of enhancements needed. The biggest set of the changes made after Solaris 11 Express was released brings various I/O enhancements to netcat shipped with Solaris 11. Also, since Solaris 11, the netcat package is installed by default in all distribution forms (live CD, text install, ...). Now, let's take a look at the new functionality: /usr/bin/netcat alternative program name (symlink) -b bufsize I/O buffer size -E use exclusive bind for the listening socket -e program program to execute -F no network close upon EOF on stdin -i timeout extension of timeout specification -L timeout linger on close timeout -l -p port addr previously not allowed usage -m byte_count Quit after receiving byte_count bytes -N file pattern for UDP scanning -I bufsize size of input socket buffer -O bufsize size of output socket buffer -R redir_spec port redirection addr/port[/{tcp,udp}] syntax of redir_spec -Z bypass zone boundaries -q timeout timeout after EOF on stdin Obviously, the Swiss army knife of networking tools just got a bit thicker. While by themselves the options are pretty self explanatory, their combination together with other options, context of use or boundary values of option arguments make it possible to construct small but powerful tools. For example: the port redirector allows to convert TCP stream to UDP datagrams. the buffer size specification makes it possible to send one byte TCP segments or to produce IP fragments easily. the socket linger option can be used to produce TCP RST segments by setting the timeout to 0 execute option makes it possible to simulate TCP/UDP servers or clients with shell/python/Perl/whatever script etc. If you find some other helpful ways use please share via comments. Manual page nc(1) contains more details, along with examples on how to use some of these new options.

    Read the article

  • What packages are neccessary to have sound output from java applets?

    - by MvG
    I've got a very minimalistic setup of ubuntu precise, created using debootstrap. So please don't assume that any packages are installed just because they usually are. On that system, I'd like to play some sounds from a java applet. However, this always fails with the following error message: javax.sound.midi.MidiUnavailableException: Can not open line at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1132) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1036) ... Caused by: java.lang.IllegalArgumentException: No line matching interface SourceDataLine supporting format PCM_SIGNED 44100.0 Hz, 16 bit, stereo, 4 bytes/frame, little-endian is supported. at javax.sound.sampled.AudioSystem.getLine(AudioSystem.java:476) at javax.sound.sampled.AudioSystem.getSourceDataLine(AudioSystem.java:604) at com.sun.media.sound.SoftSynthesizer.open(SoftSynthesizer.java:1066) ... 35 more As the messages mention a soft synthesizer, and pcm lines, I expect that the lack of some midi daemon is not the issue here. As far as I can tell, the alsa kernel modules are loaded, including snd_hda_intel, snd_pcm, snd_seq_midi among others. I've also included the alsa-base and alsa-utils packages in my installation. alsa-mixer looks good, using “HDA Intel PCH” as its default device. What other packages, configuration settings or daemon startups does java require to make its sound output work?

    Read the article

  • Wake laptop when lid is opened?

    - by crackout12
    I have a SAMSUNG laptop, which by the experience in the last months, has been a great one. I am actually implementing some functionality to it, and since I noticed, I am able to wake up my laptop from sleep by just opening the lid on Windows 7, however, I need to press to power button to wake up in Ubuntu. Using a program called i-nex, I noted that the kernel DOES dettect a "lid switch", and I am looking forward to use it to wake up function. Any ideas? UPDATE: Thanks @yossile for bringing up some clues! However, output of command cat /proc/acpi/wakeup does not show the LID device. I still tried the second set of commands you gave me with no effect. Then I tried experimenting, guessing that LID should be named by other value, so I tried enabling the others. No victory so far. But I noticed that devices that did not have any pci listings were disabled at all time no matter what I tried. Here is the output of command cat /proc/acpi/wakeup: root@samsung:~# cat /proc/acpi/wakeup Device S-state Status Sysfs node PCE4 S4 *disabled pci:0000:00:04.0 SBAZ S4 *disabled pci:0000:00:14.2 P0PC S4 *disabled pci:0000:00:14.4 GEC S4 *disabled PE20 S4 *disabled pci:0000:00:15.0 PE21 S4 *disabled PE22 S4 *disabled pci:0000:00:15.2 PE23 S4 *disabled PWRB S5 *enabled So maybe it could be that LID is either GEC,PE21, or PE23? Still, there is /proc/acpi/button/lid/LID/state file which shows that LID is opened. Any more ideas?

    Read the article

  • HP Notebook Pavilion g6-2101sl freeze

    - by StErMi
    I just bought this notebook and I've already installed in a new partition Ubuntu 12.04 LTS with 6gb of swap memory. UPDATE2: This is the laptop configuration: http://h10025.www1.hp.com/ewfrf/wc/document?cc=it&lc=it&dlc=it&tmp_geoLoc=true&docname=c03397517 Sometimes (without any special conditions) Ubuntu freezes. My mouse is blocked, the UI is blocked, ALT+F1 to kill something or to restart is blocked, I can't really do anything... I've also tried and it freezes with: Ubuntu 3D Ubuntu 2D Gnome Shell and it freezes both with low and high load. I can only press on power button (physically) and restart my laptop (and this is not the correct way to do things). I'm using this laptop for work, so I need a stable OS without this freeze. Someone knows how to solve this problem? UPDATE: /var/log/messages is empty /var/log/kernel.log - http://paste.ubuntu.com/1220182/ /var/log/Xorg.0.log - http://paste.ubuntu.com/1220186/ I just installed propetary driver from ATI, it crash anyway. This morning I started laptop, I enabled wireless, opened dropbox and chrome - freeze. When it freeze I cannot: Do ctrl+alt+f1 to get console access AltF2 + r to reload session Alt+Print + RESUB to restart I totally freezed.

    Read the article

  • What's the best structure for a repository?

    - by jpmelos
    I've looked into many open source software repositories, and I've found some common elements and somethings people do in different fashion from one another. For example, every repository has a README file, a INSTALL file, a COPYING file and stuff like that. Other things differ: Some projects, like git, have their source code in the root level, while others have the source code in a src/ folder and others, like the Linux kernel, have the source code spread in different folders in root level, that divide code by areas; Some have their tests in a t/ folder, while others in a tests/ folder, or named otherwise; Some have files about submitting patches and who the maintainers are, and those might be inside some Documentation/ or in the root level. Are there recommendations? A best practice? For example: personally, I don't like the code in the root level, git-fashion. It looks messy and confuses one trying to start as a contributor (especially because they have some code inside folders, and scripts in the root level as well, it's really messy). If I were to start a project of my own and wanted to start right from the start, are there recommendations? Best practices? How can I make a clean and clear structure? Thank you!

    Read the article

  • CodePlex Daily Summary for Saturday, November 24, 2012

    CodePlex Daily Summary for Saturday, November 24, 2012Popular ReleasesBlackJumboDog: Ver5.7.3: 2012.11.24 Ver5.7.3 (1)SMTP???????、?????????、??????????????????????? (2)?????????、?????????????????????????? (3)DNS???????CNAME????CNAME????????????????? (4)DNS????????????TTL???????? (5)???????????????????????、?????????????????? (6)???????????????????????????????MySqlBackup.NET - MySQL Backup Solution for C#, VB.NET, ASP.NET: MySqlBackup.NET 1.5.4 beta: Fix bug: When setting AddCreateDatabase = true, the database name in CREATE DATABASE sql statement is converted into Upper Case. (It should not) Fix minor bug: When exporting with custom SELECT sql statements, total rows calculation is not based on new specified conditioned SELECT sql statement.FileSystemExplorerExample: 1.0.0.1: Stable ready to downloadTEncoder: 3.1: -Added: Turkish translation (Translators, please see "To translators.txt") -Added: Profiles are now stored in different files under "Profiles" folder -Added: User created Profiles will be saved in a differen directory -Added: Custom video and audio options to profiles -Added: Container options to profiles -Added: Parent folder of input file will be created in the output folder -Added: Option to use 32bit FFmpeg eventhough the OS is 64bit -Added: New skin "Mint" -Fixed: FFMpeg could not open A...Liberty: v3.4.3.0 Release 23rd November 2012: Change Log -Added -H4 A dialog which gives further instructions when attempting to open a "Halo 4 Data" file -H4 Added a short note to the weapon editor stating that dropping your weapons will cap their ammo -Reach Edit the world's gravity -Reach Fine invincibility controls in the object editor -Reach Edit object velocity -Reach Change the teams of AI bipeds and vehicles -Reach Enable/disable fall damage on the biped editor screen -Reach Make AIs deaf and/or blind in the objec...Umbraco CMS: Umbraco 4.11.0: NugetNuGet BlogRead the release blog post for 4.11.0. Whats new50 bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesNone since 4.10.0 NoteIf you need Courier use the release candidate (as of build 26). The code editor has been greatly improved, but is sometimes problematic in Internet Explorer 9 and lower. Previously it was just disabled for IE and we recommend you disable it in umbracoSettings.config (scriptDisableEditor) if y...VidCoder: 1.4.8 Beta: Fixed encode failures when including chapter markers (Regression in 1.4.7).SCCM,Active Directory,Exchange & Powershell customisation,scripts,Web Services: SCCM 2007 - RIS Style naming console extension: CM 2007 console extension Finally giving you power of computer name generation directly from TS ! Something that Microsoft forgot to includeNeonMika.Webserver: Version 1.0: This version has now everything built in what you need to get you started. From working with digital and analog pins over PWM to file down- and upload. Please let me know if you find any bugs etc., so I can try to fix them. I work on this project in my spare time, so I hope you enjoy using it =)Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.3: Fixed supported files list on open dialog (added .pls and .m3u) Impulse Media Player splash message (can be disabled anyway)ImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????(◇?◆:)。 -???????????????????RecoverPropertiesFromJObject????(〓?〓、????、??、Vian_Pan)。 -????????????,?????????????,???SelectedValueArray???????(sam.chang)。 -??Alert.Show???????????(swtseaman)。 -???????????????,??Icon??IconUrl????(swtseaman)。 -?????????TimePicker(??)。 -?????????,??/res.axd?css=blue.css&v=1。 -????????,?????????????,???????。 -????MenuCheckBox(???????)。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.New ProjectsAntenna Tracking Unit - Projet Tuteuré /w RFTronic: 5 étudiantsAspectMVVM: A simple Aspected Oriented Programming (AOP) MVVM library.AssemblyLinePrompt: AssemblyLinePromptBing Map V7 ASP.NET Control: More information in relation to Bing Maps can be obtained from the following sites: http://www.microsoft.com/maps/isdk/ajax/ and http://www.bingmapsportal.com/eyeGuitarsWebService: Webservice to be accessed by the Android and iOS versions of our eyeGuitars application. (school project)HTML5Game: HTML5 Canvas GAMEJsonLDotnet: JsonLD Java Port for .netMap Tile Store: Store map tiles from different map content providers, such as OpenStreetMap to sql server database.Math Millionaire: This Project is a math quiz with use of random funciton for generating questions and answersMembros: Provamemory profiling for direct 3d apps for Windows Phone 8: Memory profiling for direct 3d apps for Windows Phone 8MessageSystem Network Library: MessageSystem is a network library,which can be mostly used in your cpp and c# projects.MSc thesis on global travel modelling: Project on modellingOneInstance: ?dotNet?????????,???????????。 ??????????? OneInstance ????,??????,?????????????。PCHenry: Providing technical information from a slight slanted standpoint. pzpp_ath_2a: This is a Hotel Management project. Main task of this ASP.NET project is to build a system which provides easy and intuitive management of the hotel. RiverTech API: The RiverTech API is a Development API for Visual Studio Developers. We Are looking for Help, and hope to release a stable, feature-rich API by the end of 2012!SCSM and Orchestrator Runbooks: This project will contain sample System Center Orchestrator 2012 Runbooks which integrate with System Center Service Manager 2012.testingpermiasmilwaukee: testingvDesktop: A virtual desktop programVisual Studio Settings Switcher: Switches between Visual Studio settings automatically when a solution is opened. Also switches or exports settings at the click of a button.??: ????Helper?,???????Website???????/??????,??????。

    Read the article

  • UPDATE MANAGER UNABLE TO UPDATE

    - by muguro
    Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources. i get this error every time i try updating. the system shows that it has 466 updates but fails after clicking update more details have this accountsservice apparmor apport apport-gtk apt apt-transport-https apt-utils aptdaemon aptdaemon-data at-spi2-core bamfdaemon base-files bcmwl-kernel-source bind9-host compiz compiz-core compiz-gnome compiz-plugins-default cron cups cups-bsd cups-client cups-common cups-filters cups-ppdc dbus dbus-x11 dconf-gsettings-backend dconf-service desktop-file-utils dmsetup dnsutils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common firefox firefox-globalmenu firefox-gnome-support firefox-locale-en fontconfig fontconfig-config fonts-liberation fonts-opensymbol foomatic-filters gcalctool gdb ghostscript ghostscript-cups ghostscript-x ginn gir1.2-atspi-2.0 gir1.2-dbusmenu-glib-0.4 gir1.2-dbusmenu-gtk-0.4 gir1.2-gst-plugins-base-0.10 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-gudev-1.0 gir1.2-javascriptcoregtk-3.0 gir1.2-launchpad-integration-3.0 gir1.2-pango-1.0 gir1.2-rb-3.0 gir1.2-totem-1.0 gir1.2-ubuntuoneui-3.0 gir1.2-unity-5.0 gir1.2-webkit-3.0 glib-networking glib-networking-common glib-networking-services gnome-accessibility-themes gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-games-data gnome-icon-theme gnome-media gnome-orca gnome-settings-daemon gnome-sudoku gnomine gnupg google-talkplugin gpgv grub-common grub-pc grub-pc-bin grub2-common gstreamer0.10-alsa gstreamer0.10-plugins-base gstreamer0.10-plugins-base-apps gstreamer0.10-x gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-fuse gvfs-libs gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hdparm hplip hplip-data indicator-sound initscripts isc-dhcp-client isc-dhcp-common jockey-common jockey-gtk krb5-locales landscape-client-ui-install language-pack-en language-pack-en-base language-pack-gnome-en language-pack-gnome-en-base launchpad-integration libaccountsservice0 libapt-inst1.4 libapt-pkg4.12 libart-2.0-2 libasound2 libatspi2.0-0 libbamf0 libbamf3-0 libbind9-80 libc-bin libc-dev-bin libc6 libc6-dev libcairo-gobject2 libcairo2

    Read the article

  • 10.10 boots to command line login prompt

    - by greggory.hz
    I recently installed Ubuntu 10.10 on a computer that was previously running 10.04 (that worked fine). Now, each time I boot up, it starts up in a command line login prompt. I can login and it stays at the command line (as expected). I can then manually start gdm with sudo start gdm and it works fine. I can also enable compiz (using proprietary nvidia drivers) so I'm reasonably confident that it's not a driver problem (at least not in the sense that the drivers just flat out aren't working). Interestingly, if I leave it at the command prompt without logging in, after about 5 or 10 minutes, gnome starts up on its own. I'm not sure what is causing this. This is what dmesg | tail gives me after a manual start of gdm: [ 15.664166] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.18 Tue Jan 18 21:46:26 PST 2011 [ 15.991304] type=1400 audit(1297543976.953:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=990 comm="apparmor_parser" [ 16.606986] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 18.798506] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 26.740010] eth0: no IPv6 routers present [ 90.444593] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 189.252208] audit_printk_skb: 21 callbacks suppressed [ 189.252213] type=1400 audit(1297544150.218:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1876 comm="apparmor_parser" [ 189.252584] type=1400 audit(1297544150.218:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1876 comm="apparmor_parser" [ 351.159585] lo: Disabled Privacy Extensions

    Read the article

  • Archbeat Link-O-Rama Top 10 Tweets for October 2013

    - by OTN ArchBeat
    What caught the attention of the 1,988 people who follow @OTNArchBeat last month? The answer is below, in the list of Top 10 Tweets for October 2013 RT @java: Which women in tech inspire you? Blog about them on Ada Lovelace Day! #ALD13 Oct 10, 2013 at 11:14 AM RT @ORCL_Linux: New blog post: Announcing Unbreakable Enterprise Kernel Release 3 for #Oracle #Linux Oct 21, 2013 at 07:11 PM RT @glassfish: Quick & Dirty How-to Guide: Install #GlassFish 4 on #RaspberryPi. Creating an #IoT infra via @MkHeck Oct 27, 2013 at 07:19 PM RT @java: Nighthacking with James Gosling, interview from Hawaii, watch live Oct. 23, 11am PT #java Oct 21, 2013 at 11:26 AM RT @ensode: "Oracle has posted blogs on how to migrate from #Spring to #JavaEE" I wrote the linked article Oct 07, 2013 at 10:53 AM SOA and User Interfaces - by @soacommunity @hajonormann @gschmutz @t_winterberg et al #industrialsoa Oct 03, 2013 at 01:17 PM RT @oracleace: Welcome and congrats to new #ACEDs @kevin_mcginley and Rene van Wijk @MiddlewareMagic Oct 25, 2013 at 12:59 PM SOA in Real Life: Mobile Solutions by @soacommunity @HajoNormann @gschmutz @t_winterberg et al #industrialsoa Oct 28, 2013 at 09:23 AM RT @OracleAnalytics: Curious to how big #oow13 was? Here’s an infographic to show you some of the stats. Oct 25, 2013 at 01:13 PM Free Poster: ACM in Practice >> thanks to @dschmeid @hajonormann @torsten_winterberg @tbmaier @gschmutz et al. Oct 16, 2013 at 09:56 AM Thought for the Day "You can converge a toaster and a refrigerator, but those things are probably not going to be pleasing to the user." — Tim Cook, CEO of Apple Inc. (Born November 1, 1960) Source: brainyquote.com

    Read the article

  • Consuming Async SOA in a WebService Proxy By Anagha Desai

    - by JuergenKress
    Consider a scenario where an application is built using SOA Async processes and needs to be consumed in a WebService Proxy. In this blog, we will be demonstrating how to implement this use case. To achieve this, we will follow a two step process: Create an Async SOA BPEL process. Consume it in a WebService Proxy. Pre-requisite: Jdeveloper with SOA extension installed. Steps: To begin with step 1, create a SOA Application and name it SOA_AsyncApp. This invokes Create SOA Application wizard. In the wizard, choose composite with BPEL process in Step 3. Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Anagha Desai,Async SOA,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Problem with SANE and CardScan

    - by TiuTalk
    I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

    Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >