Search Results

Search found 9124 results on 365 pages for 'big sal'.

Page 274/365 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

  • Linux Server partitioning

    - by user1717735
    There's a lot of infos about this out there, but there's also a lot of contradictory infos… That's why i need some advices about it. So far, on the servers i had home for test (or even "home production") purposes i didn't really care about partitioning and i configured all in / + a swap partition, over RAID 0. Nevertheless, this pattern can't apply to production servers. I have found a good starting point here, but also it depends on what the servers will be used for… So basically, i have a server on which there will be apache, php, mysql. It will have to handle file uploads (up to 2GB) and has 2*2TB hard drive. I plan to set : / 100GB, /var 1000GB (apache files and mysql files will be here), /tmp 800GB (handles the php tmp file) /home 96GB swap 4GB All of this if of course over RAID 1. But actually, it's not a big deal if I lose data being uploaded, so would it be interesting mounting /tmp over raid 0 while maintaining the rest over raid 1? Sounds complicated…

    Read the article

  • Benchmark Linq2SQL, Subsonic2, Subsonic3 - Any other ideas to make them faster ?

    - by Aristos
    I am working with Subsonic 2 more than 3 years now... After Linq appears and then Subsonic 3, I start thinking about moving to the new Linq futures that are connected to sql. I must say that I start move and port my subsonic 2 with SubSonic 3, and very soon I discover that the speed was so slow thats I didn't believe it - and starts all that tests. Then I test Linq2Sql and see also a delay - compare it with Subsonic 2. My question here is, especial for the linq2sql, and the up-coming dotnet version 4, what else can I do to speed it up ? What else on linq2sql settings, or classes, not on this code that I have used for my messures I place here the project that I make the tests, also the screen shots of the results. How I make the tests - and the accurate of my measures. I use only for my question Google chrome, because its difficult for me to show here a lot of other measures that I have done with more complex programs. This is the most simple one, I just measure the Data Read. How can I prove that. I make a simple Thread.Sleep(10 seconds) and see if I see that 10 seconds on Google Chrome Measure, and yes I see it. here are more test with this Sleep thead to see whats actually Chrome gives. 10 seconds delay 100 ms delay Zero delay There is only a small 15ms thats get on messure, is so small compare it with the rest of my tests that I do not care about. So what I measure I measure just the data read via each method - did not count the data or database delay, or any disk read or anything like that. Later on the image with the result I show that no disk activity exist on the measures See this image to see what really I measure and if this is correct Why I chose this kind of test Its simple, it's real, and it's near my real problem that I found the delay of subsonic 3 in real program with real data. Now lets tests the dals Start by see this image I have 4-5 calls on every method, the one after the other. The results are. For a loop of 100 times, ask for 5 Rows, one not exist, approximatively.. Simple adonet:81ms SubSonic 2 :210ms linq2sql :1.70sec linq2sql using CompiledQuery.Compile :239ms Subsonic 3 :15.00sec (wow - extreme slow) The project http://www.planethost.gr/DalSpeedTests.rar Can any one confirm this benchmark, or make any optimizations to help me out ? Other tests Some one publish here this link http://ormbattle.net/ (and then remove it - don not know why) In this page you can find a really useful advanced tests for all, except subsonic 2 and subsonic 3 that I have here ! Optimizing What I really ask here is if some one can now any trick how to optimize the DALs, not by changing the test code, but by changing the code and the settings on each dal. For example... Optimizing Linq2SQL I start search how to optimize Linq2sql and found this article, and maybe more exist. Finally I make the tricks from that page to run, and optimize the code using them all. The speed was near 1.50sec from 1.70.... big improvement, but still slow. Then I found a different way - same idea article, and wow ! the speed is blow up. Using this trick with CompiledQuery.Compile, the time from 1.5sec is now 239ms. Here is the code for the precompiled... Func<DataClassesDataContext, int, IQueryable<Product>> compiledQuery = CompiledQuery.Compile((DataClassesDataContext meta, int IdToFind) => (from myData in meta.Products where myData.ProductID.Equals(IdToFind) select myData)); StringBuilder Test = new StringBuilder(); int[] MiaSeira = { 5, 6, 10, 100, 7 }; using (DataClassesDataContext context = new DataClassesDataContext()) { context.ObjectTrackingEnabled = false; for (int i = 0; i < 100; i++) { foreach (int EnaID in MiaSeira) { var oFindThat2P = compiledQuery(context, EnaID); foreach (Product One in oFindThat2P) { Test.Append("<br />"); Test.Append(One.ProductName); } } } } Optimizing SubSonic 3 and problems I make many performance profiling, and start change the one after the other and the speed is better but still too slow. I post them on subsonic group but they ignore the problem, they say that everything is fast... Here is some capture of my profiling and delay points inside subsonic source code I have end up that subsonic3 make more call on the structure of the database rather than on data itself. Needs to reconsider the hole way of asking for data, and follow the subsonic2 idea if this is possible. Try to make precompile to subsonic 3 like I did in linq2Sql but fail for the moment... Optimizing SubSonic 2 After I discover that subsonic 3 is extreme slow, I start my checks on subsonic 2 - that I have never done before believing that is fast. (and it is) So its come up with some points that can be faster. For example there are many loops like this ones that actually is slow because of string manipulation and compares inside the loop. I must say to you that this code called million of times ! on a period of few minutes ! of data asking from the program. On small amount of tables and small fields maybe this is not a big think for some people, but on large amount of tables, the delay is even more. So I decide and optimize the subsonic 2 by my self, by replacing the string compares, with number compares! Simple. I do that almost on every point that profiler say that is slow. I change also all small points that can be even a little faster, and disable some not so used thinks. The results, 5% faster on NorthWind database, near 20% faster on my database with 250 tables. That is count with 500ms less in 10 seconds process on northwind, 100ms faster on my database on 500ms process time. I do not have captures to show you for that because I have made them with different code, different time, and track them down on paper. Anyway this is my story and my question on all that, what else do you know to make them even faster... For this measures I have use Subsonic 2.2 optimized by me, Subsonic 3.0.0.3 a little optimized by me, and Dot.Net 3.5

    Read the article

  • RESTful services architecture question

    - by abovesun
    This is question more about service architecture strategy, we are building big web system based on rest services on back end. And we are currently trying to build some standard internal to follow while developing rest services. Some queries returns list of entities, for example lets consider we have image galleries retrieving service: /gell_all_galeries, returning next response: <galleries> <gallery> <id>some_gallery_id</id> <name>my photos</name> <photos> <photo> <id>123</id> <name>my photo</name> <location>http://mysite/photo/show/123</location> ...... <author> <id>some_id</id> <name>some name</name> ....... <author> </photo> <photo> ..... </photo> <photo> ..... </photo> <photo> ..... </photo> <photo> ..... </photo> </photos> </gallery> <gallery> .... </gallery> <gallery> .... </gallery> <gallery> .... </gallery> <gallery> .... </gallery> </galleries> As you see here, response quite big and heavy, and not always we need such deep info level. Usual solution is to use or http://ru.wikipedia.org/wiki/Atom elements for each gallery instead of full gallery data: <galleries> <gallery> <id>some_gallery_id</id> <link href="http://mysite/gallery/some_gallery_id"/> </gallery> <gallery> <id>second_gallery_id</id> <link href="http://mysite/gallery/second_gallery_id"/> </gallery> <gallery> .... </gallery> <gallery> .... </gallery> <gallery> .... </gallery> <gallery> .... </gallery> </galleries> The first question, is next: maybe instead we shouldn't even use and types, and just use generic and for all resources that return list objects: <list> <item><link href="http://mysite/gallery/some_gallery_id"/></item> <item><link href="http://mysite/gallery/other_gallery_id"/></item> <item>....</item> </list> And the second question, after user try to retrieve info about some concrete gallery, he'll use for example http://mysite/gallery/some_gallery_id link, what should he see as results? Should it be: <gallery> <id>some_gallery_id</id> <name>my photos</name> <photos> <photo> <id>123</id> <name>my photo</name> <location>http://mysite/photo/show/123</location> ...... <author> <id>some_id</id> <name>some name</name> ....... <author> </photo> <photo> ..... </photo> <photo> ..... </photo> <photo> ..... </photo> <photo> ..... </photo> </photos> </gallery> or : <gallery> <id>some_gallery_id</id> <name>my photos</name> <photos> <photo><link href="http://mysite/photo/11111"/></photo> <photo><link href="http://mysite/photo/22222"/></photo> <photo><link href="http://mysite/photo/33333"/> </photo> <photo> ..... </photo> </photos> </gallery> or <gallery> <id>some_gallery_id</id> <name>my photos</name> <photos> <photo> <link href="http://mysite/photo/11111"/> <author> <link href="http://mysite/author/11111"/> </author> </photo> <photo> <link href="http://mysite/photo/22222"/> <author> <link href="http://mysite/author/11111"/> </author> </photo> <photo> <link href="http://mysite/photo/33333"/> <author> <link href="http://mysite/author/11111"/> </author> </photo> <photo> ..... </photo> </photos> </gallery> I mean if we use link instead of full object info, how deep we should go there? Should I show an author inside photo and so on. Probably my question ambiguous, but what I'm trying to do is create general strategy in such cases for all team members to follow in future.

    Read the article

  • how to update database table in sqlite3 iphone

    - by Ajeet Kumar Yadav
    Hi I am new in Iphone i am developing application that is use database but i am face problem. In My application I am using table view. I am fetch the value from database in the table view this is done after that we also insert value throw text field in that table of database and display that value in table view.I am also use another table in database table name is Alootikki the value of table alootikki is display in other table view in application and user want to add this table alootikki value in first table of database and display that value in table view when we do this value is display only in the table view this is not write in the database table. when value is display and user want to add other data throw text field then only that add value is show first value is remove from table view. I am not able to solve this plz help me. The code is given bellow for database -(void)Data1 { //////databaseName = @"dataa.sqlite"; databaseName = @"Recipe1.sqlite"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDir = [documentPaths objectAtIndex:0]; databasePath =[documentsDir stringByAppendingPathComponent:databaseName]; [self checkAndCreateDatabase]; list1 = [[NSMutableArray alloc] init]; sqlite3 *database; if (sqlite3_open([databasePath UTF8String], &database) == SQLITE_OK) { if(addStmt == nil) { ////////////const char *sql = "insert into Dataa(item) Values(?)"; const char *sql = " insert into Slist(Incredients ) Values(?)"; if(sqlite3_prepare_v2(database, sql, -1, &addStmt, NULL) != SQLITE_OK) NSAssert1(0, @"Error while creating add statement. '%s'", sqlite3_errmsg(database)); } sqlite3_bind_text(addStmt, 1, [i UTF8String], -1, SQLITE_TRANSIENT); //sqlite3_bind_int(addStmt,1,i); // sqlite3_bind_text(addStmt, 1, [coffeeName UTF8String], -1, SQLITE_TRANSIENT); // sqlite3_bind_double(addStmt, 2, [price doubleValue]); if(SQLITE_DONE != sqlite3_step(addStmt)) NSAssert1(0, @"Error while inserting data. '%s'", sqlite3_errmsg(database)); else //SQLite provides a method to get the last primary key inserted by using sqlite3_last_insert_rowid coffeeID = sqlite3_last_insert_rowid(database); //Reset the add statement. sqlite3_reset(addStmt); // sqlite3_clear_bindings(detailStmt); //} } sqlite3_finalize(addStmt); addStmt = nil; sqlite3_close(database); } -(void)sopinglist { databaseName= @"Recipe1.sqlite"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDir = [documentPaths objectAtIndex:0]; databasePath =[documentsDir stringByAppendingPathComponent:databaseName]; [self checkAndCreateDatabase]; list1 = [[NSMutableArray alloc] init]; sqlite3 *database; if (sqlite3_open([databasePath UTF8String], &database) == SQLITE_OK) { if(addStmt == nil) { ///////////const char *sql = "insert into Dataa(item) Values(?)"; const char *sql = " insert into Slist(Incredients,Recipename,foodtype ) Values(?,?,?)"; ///////////// const char *sql =" Update Slist ( Incredients, Recipename,foodtype) Values(?,?,?)"; if(sqlite3_prepare_v2(database, sql, -1, &addStmt, NULL) != SQLITE_OK) NSAssert1(0, @"Error while creating add statement. '%s'", sqlite3_errmsg(database)); } /////for( NSString * j in k) sqlite3_bind_text(addStmt, 1, [k UTF8String], -1, SQLITE_TRANSIENT); //sqlite3_bind_int(addStmt,1,i); // sqlite3_bind_text(addStmt, 1, [coffeeName UTF8String], -1, SQLITE_TRANSIENT); // sqlite3_bind_double(addStmt, 2, [price doubleValue]); if(SQLITE_DONE != sqlite3_step(addStmt)) NSAssert1(0, @"Error while inserting data. '%s'", sqlite3_errmsg(database)); else //SQLite provides a method to get the last primary key inserted by using sqlite3_last_insert_rowid coffeeID = sqlite3_last_insert_rowid(database); //Reset the add statement. sqlite3_reset(addStmt); // sqlite3_clear_bindings(detailStmt); //} } sqlite3_finalize(addStmt); addStmt = nil; sqlite3_close(database); } -(void)Data { ////////////////databaseName = @"dataa.sqlite"; databaseName = @"Recipe1.sqlite"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDir = [documentPaths objectAtIndex:0]; databasePath =[documentsDir stringByAppendingPathComponent:databaseName]; [self checkAndCreateDatabase]; list1 = [[NSMutableArray alloc] init]; sqlite3 *database; if (sqlite3_open([databasePath UTF8String], &database) == SQLITE_OK) { if(detailStmt == nil) { const char *sql = "Select * from Slist "; if(sqlite3_prepare_v2(database, sql, -1, &detailStmt, NULL) == SQLITE_OK) { //NSLog(@"Hiiiiiii"); //sqlite3_bind_text(detailStmt, 1, [t1 UTF8String], -1, SQLITE_TRANSIENT); //sqlite3_bind_text(detailStmt, 2, [t2 UTF8String], -2, SQLITE_TRANSIENT); //sqlite3_bind_int(detailStmt, 3, t3); while(sqlite3_step(detailStmt) == SQLITE_ROW) { NSLog(@"Helllloooooo"); //NSString *item= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 0)]; NSString *item= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 0)]; char *str=( char*)sqlite3_column_text(detailStmt, 0); if( str) { item = [ NSString stringWithUTF8String:str ]; } else { item= @""; } //+ (NSString*)stringWithCharsIfNotNull: (char*)item /// { // if ( item == NULL ) // return nil; //else // return [[NSString stringWithUTF8String: item] //stringByTrimmingCharactersInSet: [NSCharacterSet whitespaceAndNewlineCharacterSet]]; //} //NSString *fame= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 1)]; //NSString *cinemax = [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 2)]; //NSString *big= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 3)]; //pvr1 = pvr; item1=item; //NSLog(@"%@",item1); data = [[NSMutableArray alloc] init]; list *animal=[[list alloc] initWithName:item1]; // Add the animal object to the animals Array [list1 addObject:animal]; //[list1 addObject:item]; } sqlite3_reset(detailStmt); } sqlite3_finalize(detailStmt); // sqlite3_clear_bindings(detailStmt); } } detailStmt = nil; sqlite3_close(database); } (void)recpies { /////////////////////databaseName = @"Data.sqlite"; databaseName = @"Recipe1.sqlite"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDir = [documentPaths objectAtIndex:0]; databasePath =[documentsDir stringByAppendingPathComponent:databaseName]; [self checkAndCreateDatabase]; list1 = [[NSMutableArray alloc] init]; sqlite3 *database; if (sqlite3_open([databasePath UTF8String], &database) == SQLITE_OK) { if(detailStmt == nil) { //////const char *sql = "Select * from Dataa"; const char *sql ="select *from alootikki"; if(sqlite3_prepare_v2(database, sql, -1, &detailStmt, NULL) == SQLITE_OK) { //NSLog(@"Hiiiiiii"); //sqlite3_bind_text(detailStmt, 1, [t1 UTF8String], -1, SQLITE_TRANSIENT); //sqlite3_bind_text(detailStmt, 2, [t2 UTF8String], -2, SQLITE_TRANSIENT); //sqlite3_bind_int(detailStmt, 3, t3); while(sqlite3_step(detailStmt) == SQLITE_ROW) { //NSLog(@"Helllloooooo"); //NSString *item= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 0)]; NSString *item= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 0)]; char *str=( char*)sqlite3_column_text(detailStmt, 0); if( str) { item = [ NSString stringWithUTF8String:str ]; } else { item= @""; } //NSString *fame= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 1)]; //NSString *cinemax = [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 2)]; //NSString *big= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 3)]; //pvr1 = pvr; item1=item; //NSLog(@"%@",item1); data = [[NSMutableArray alloc] init]; list *animal=[[list alloc] initWithName:item1]; // Add the animal object to the animals Array [list1 addObject:animal]; //[list1 addObject:item]; } sqlite3_reset(detailStmt); } sqlite3_finalize(detailStmt); // sqlite3_clear_bindings(detailStmt); } } detailStmt = nil; sqlite3_close(database); }

    Read the article

  • Capturing and Transforming ASP.NET Output with Response.Filter

    - by Rick Strahl
    During one of my Handlers and Modules session at DevConnections this week one of the attendees asked a question that I didn’t have an immediate answer for. Basically he wanted to capture response output completely and then apply some filtering to the output – effectively injecting some additional content into the page AFTER the page had completely rendered. Specifically the output should be captured from anywhere – not just a page and have this code injected into the page. Some time ago I posted some code that allows you to capture ASP.NET Page output by overriding the Render() method, capturing the HtmlTextWriter() and reading its content, modifying the rendered data as text then writing it back out. I’ve actually used this approach on a few occasions and it works fine for ASP.NET pages. But this obviously won’t work outside of the Page class environment and it’s not really generic – you have to create a custom page class in order to handle the output capture. [updated 11/16/2009 – updated ResponseFilterStream implementation and a few additional notes based on comments] Enter Response.Filter However, ASP.NET includes a Response.Filter which can be used – well to filter output. Basically Response.Filter is a stream through which the OutputStream is piped back to the Web Server (indirectly). As content is written into the Response object, the filter stream receives the appropriate Stream commands like Write, Flush and Close as well as read operations although for a Response.Filter that’s uncommon to be hit. The Response.Filter can be programmatically replaced at runtime which allows you to effectively intercept all output generation that runs through ASP.NET. A common Example: Dynamic GZip Encoding A rather common use of Response.Filter hooking up code based, dynamic  GZip compression for requests which is dead simple by applying a GZipStream (or DeflateStream) to Response.Filter. The following generic routines can be used very easily to detect GZip capability of the client and compress response output with a single line of code and a couple of library helper routines: WebUtils.GZipEncodePage(); which is handled with a few lines of reusable code and a couple of static helper methods: /// <summary> ///Sets up the current page or handler to use GZip through a Response.Filter ///IMPORTANT:  ///You have to call this method before any output is generated! /// </summary> public static void GZipEncodePage() {     HttpResponse Response = HttpContext.Current.Response;     if(IsGZipSupported())     {         stringAcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"];         if(AcceptEncoding.Contains("deflate"))         {             Response.Filter = newSystem.IO.Compression.DeflateStream(Response.Filter,                                        System.IO.Compression.CompressionMode.Compress);             Response.AppendHeader("Content-Encoding", "deflate");         }         else        {             Response.Filter = newSystem.IO.Compression.GZipStream(Response.Filter,                                       System.IO.Compression.CompressionMode.Compress);             Response.AppendHeader("Content-Encoding", "gzip");                            }     }     // Allow proxy servers to cache encoded and unencoded versions separately    Response.AppendHeader("Vary", "Content-Encoding"); } /// <summary> /// Determines if GZip is supported /// </summary> /// <returns></returns> public static bool IsGZipSupported() { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (!string.IsNullOrEmpty(AcceptEncoding) && (AcceptEncoding.Contains("gzip") || AcceptEncoding.Contains("deflate"))) return true; return false; } GZipStream and DeflateStream are streams that are assigned to Response.Filter and by doing so apply the appropriate compression on the active Response. Response.Filter content is chunked So to implement a Response.Filter effectively requires only that you implement a custom stream and handle the Write() method to capture Response output as it’s written. At first blush this seems very simple – you capture the output in Write, transform it and write out the transformed content in one pass. And that indeed works for small amounts of content. But you see, the problem is that output is written in small buffer chunks (a little less than 16k it appears) rather than just a single Write() statement into the stream, which makes perfect sense for ASP.NET to stream data back to IIS in smaller chunks to minimize memory usage en route. Unfortunately this also makes it a more difficult to implement any filtering routines since you don’t directly get access to all of the response content which is problematic especially if those filtering routines require you to look at the ENTIRE response in order to transform or capture the output as is needed for the solution the gentleman in my session asked for. So in order to address this a slightly different approach is required that basically captures all the Write() buffers passed into a cached stream and then making the stream available only when it’s complete and ready to be flushed. As I was thinking about the implementation I also started thinking about the few instances when I’ve used Response.Filter implementations. Each time I had to create a new Stream subclass and create my custom functionality but in the end each implementation did the same thing – capturing output and transforming it. I thought there should be an easier way to do this by creating a re-usable Stream class that can handle stream transformations that are common to Response.Filter implementations. Creating a semi-generic Response Filter Stream Class What I ended up with is a ResponseFilterStream class that provides a handful of Events that allow you to capture and/or transform Response content. The class implements a subclass of Stream and then overrides Write() and Flush() to handle capturing and transformation operations. By exposing events it’s easy to hook up capture or transformation operations via single focused methods. ResponseFilterStream exposes the following events: CaptureStream, CaptureString Captures the output only and provides either a MemoryStream or String with the final page output. Capture is hooked to the Flush() operation of the stream. TransformStream, TransformString Allows you to transform the complete response output with events that receive a MemoryStream or String respectively and can you modify the output then return it back as a return value. The transformed output is then written back out in a single chunk to the response output stream. These events capture all output internally first then write the entire buffer into the response. TransformWrite, TransformWriteString Allows you to transform the Response data as it is written in its original chunk size in the Stream’s Write() method. Unlike TransformStream/TransformString which operate on the complete output, these events only see the current chunk of data written. This is more efficient as there’s no caching involved, but can cause problems due to searched content splitting over multiple chunks. Using this implementation, creating a custom Response.Filter transformation becomes as simple as the following code. To hook up the Response.Filter using the MemoryStream version event: ResponseFilterStream filter = new ResponseFilterStream(Response.Filter); filter.TransformStream += filter_TransformStream; Response.Filter = filter; and the event handler to do the transformation: MemoryStream filter_TransformStream(MemoryStream ms) { Encoding encoding = HttpContext.Current.Response.ContentEncoding; string output = encoding.GetString(ms.ToArray()); output = FixPaths(output); ms = new MemoryStream(output.Length); byte[] buffer = encoding.GetBytes(output); ms.Write(buffer,0,buffer.Length); return ms; } private string FixPaths(string output) { string path = HttpContext.Current.Request.ApplicationPath; // override root path wonkiness if (path == "/") path = ""; output = output.Replace("\"~/", "\"" + path + "/").Replace("'~/", "'" + path + "/"); return output; } The idea of the event handler is that you can do whatever you want to the stream and return back a stream – either the same one that’s been modified or a brand new one – which is then sent back to as the final response. The above code can be simplified even more by using the string version events which handle the stream to string conversions for you: ResponseFilterStream filter = new ResponseFilterStream(Response.Filter); filter.TransformString += filter_TransformString; Response.Filter = filter; and the event handler to do the transformation calling the same FixPaths method shown above: string filter_TransformString(string output) { return FixPaths(output); } The events for capturing output and capturing and transforming chunks work in a very similar way. By using events to handle the transformations ResponseFilterStream becomes a reusable component and we don’t have to create a new stream class or subclass an existing Stream based classed. By the way, the example used here is kind of a cool trick which transforms “~/” expressions inside of the final generated HTML output – even in plain HTML controls not HTML controls – and transforms them into the appropriate application relative path in the same way that ResolveUrl would do. So you can write plain old HTML like this: <a href=”~/default.aspx”>Home</a>  and have it turned into: <a href=”/myVirtual/default.aspx”>Home</a>  without having to use an ASP.NET control like Hyperlink or Image or having to constantly use: <img src=”<%= ResolveUrl(“~/images/home.gif”) %>” /> in MVC applications (which frankly is one of the most annoying things about MVC especially given the path hell that extension-less and endpoint-less URLs impose). I can’t take credit for this idea. While discussing the Response.Filter issues on Twitter a hint from Dylan Beattie who pointed me at one of his examples which does something similar. I thought the idea was cool enough to use an example for future demos of Response.Filter functionality in ASP.NET next I time I do the Modules and Handlers talk (which was great fun BTW). How practical this is is debatable however since there’s definitely some overhead to using a Response.Filter in general and especially on one that caches the output and the re-writes it later. Make sure to test for performance anytime you use Response.Filter hookup and make sure it' doesn’t end up killing perf on you. You’ve been warned :-}. How does ResponseFilterStream work? The big win of this implementation IMHO is that it’s a reusable  component – so for implementation there’s no new class, no subclassing – you simply attach to an event to implement an event handler method with a straight forward signature to retrieve the stream or string you’re interested in. The implementation is based on a subclass of Stream as is required in order to handle the Response.Filter requirements. What’s different than other implementations I’ve seen in various places is that it supports capturing output as a whole to allow retrieving the full response output for capture or modification. The exception are the TransformWrite and TransformWrite events which operate only active chunk of data written by the Response. For captured output, the Write() method captures output into an internal MemoryStream that is cached until writing is complete. So Write() is called when ASP.NET writes to the Response stream, but the filter doesn’t pass on the Write immediately to the filter’s internal stream. The data is cached and only when the Flush() method is called to finalize the Stream’s output do we actually send the cached stream off for transformation (if the events are hooked up) and THEN finally write out the returned content in one big chunk. Here’s the implementation of ResponseFilterStream: /// <summary> /// A semi-generic Stream implementation for Response.Filter with /// an event interface for handling Content transformations via /// Stream or String. /// <remarks> /// Use with care for large output as this implementation copies /// the output into a memory stream and so increases memory usage. /// </remarks> /// </summary> public class ResponseFilterStream : Stream { /// <summary> /// The original stream /// </summary> Stream _stream; /// <summary> /// Current position in the original stream /// </summary> long _position; /// <summary> /// Stream that original content is read into /// and then passed to TransformStream function /// </summary> MemoryStream _cacheStream = new MemoryStream(5000); /// <summary> /// Internal pointer that that keeps track of the size /// of the cacheStream /// </summary> int _cachePointer = 0; /// <summary> /// /// </summary> /// <param name="responseStream"></param> public ResponseFilterStream(Stream responseStream) { _stream = responseStream; } /// <summary> /// Determines whether the stream is captured /// </summary> private bool IsCaptured { get { if (CaptureStream != null || CaptureString != null || TransformStream != null || TransformString != null) return true; return false; } } /// <summary> /// Determines whether the Write method is outputting data immediately /// or delaying output until Flush() is fired. /// </summary> private bool IsOutputDelayed { get { if (TransformStream != null || TransformString != null) return true; return false; } } /// <summary> /// Event that captures Response output and makes it available /// as a MemoryStream instance. Output is captured but won't /// affect Response output. /// </summary> public event Action<MemoryStream> CaptureStream; /// <summary> /// Event that captures Response output and makes it available /// as a string. Output is captured but won't affect Response output. /// </summary> public event Action<string> CaptureString; /// <summary> /// Event that allows you transform the stream as each chunk of /// the output is written in the Write() operation of the stream. /// This means that that it's possible/likely that the input /// buffer will not contain the full response output but only /// one of potentially many chunks. /// /// This event is called as part of the filter stream's Write() /// operation. /// </summary> public event Func<byte[], byte[]> TransformWrite; /// <summary> /// Event that allows you to transform the response stream as /// each chunk of bytep[] output is written during the stream's write /// operation. This means it's possibly/likely that the string /// passed to the handler only contains a portion of the full /// output. Typical buffer chunks are around 16k a piece. /// /// This event is called as part of the stream's Write operation. /// </summary> public event Func<string, string> TransformWriteString; /// <summary> /// This event allows capturing and transformation of the entire /// output stream by caching all write operations and delaying final /// response output until Flush() is called on the stream. /// </summary> public event Func<MemoryStream, MemoryStream> TransformStream; /// <summary> /// Event that can be hooked up to handle Response.Filter /// Transformation. Passed a string that you can modify and /// return back as a return value. The modified content /// will become the final output. /// </summary> public event Func<string, string> TransformString; protected virtual void OnCaptureStream(MemoryStream ms) { if (CaptureStream != null) CaptureStream(ms); } private void OnCaptureStringInternal(MemoryStream ms) { if (CaptureString != null) { string content = HttpContext.Current.Response.ContentEncoding.GetString(ms.ToArray()); OnCaptureString(content); } } protected virtual void OnCaptureString(string output) { if (CaptureString != null) CaptureString(output); } protected virtual byte[] OnTransformWrite(byte[] buffer) { if (TransformWrite != null) return TransformWrite(buffer); return buffer; } private byte[] OnTransformWriteStringInternal(byte[] buffer) { Encoding encoding = HttpContext.Current.Response.ContentEncoding; string output = OnTransformWriteString(encoding.GetString(buffer)); return encoding.GetBytes(output); } private string OnTransformWriteString(string value) { if (TransformWriteString != null) return TransformWriteString(value); return value; } protected virtual MemoryStream OnTransformCompleteStream(MemoryStream ms) { if (TransformStream != null) return TransformStream(ms); return ms; } /// <summary> /// Allows transforming of strings /// /// Note this handler is internal and not meant to be overridden /// as the TransformString Event has to be hooked up in order /// for this handler to even fire to avoid the overhead of string /// conversion on every pass through. /// </summary> /// <param name="responseText"></param> /// <returns></returns> private string OnTransformCompleteString(string responseText) { if (TransformString != null) TransformString(responseText); return responseText; } /// <summary> /// Wrapper method form OnTransformString that handles /// stream to string and vice versa conversions /// </summary> /// <param name="ms"></param> /// <returns></returns> internal MemoryStream OnTransformCompleteStringInternal(MemoryStream ms) { if (TransformString == null) return ms; //string content = ms.GetAsString(); string content = HttpContext.Current.Response.ContentEncoding.GetString(ms.ToArray()); content = TransformString(content); byte[] buffer = HttpContext.Current.Response.ContentEncoding.GetBytes(content); ms = new MemoryStream(); ms.Write(buffer, 0, buffer.Length); //ms.WriteString(content); return ms; } /// <summary> /// /// </summary> public override bool CanRead { get { return true; } } public override bool CanSeek { get { return true; } } /// <summary> /// /// </summary> public override bool CanWrite { get { return true; } } /// <summary> /// /// </summary> public override long Length { get { return 0; } } /// <summary> /// /// </summary> public override long Position { get { return _position; } set { _position = value; } } /// <summary> /// /// </summary> /// <param name="offset"></param> /// <param name="direction"></param> /// <returns></returns> public override long Seek(long offset, System.IO.SeekOrigin direction) { return _stream.Seek(offset, direction); } /// <summary> /// /// </summary> /// <param name="length"></param> public override void SetLength(long length) { _stream.SetLength(length); } /// <summary> /// /// </summary> public override void Close() { _stream.Close(); } /// <summary> /// Override flush by writing out the cached stream data /// </summary> public override void Flush() { if (IsCaptured && _cacheStream.Length > 0) { // Check for transform implementations _cacheStream = OnTransformCompleteStream(_cacheStream); _cacheStream = OnTransformCompleteStringInternal(_cacheStream); OnCaptureStream(_cacheStream); OnCaptureStringInternal(_cacheStream); // write the stream back out if output was delayed if (IsOutputDelayed) _stream.Write(_cacheStream.ToArray(), 0, (int)_cacheStream.Length); // Clear the cache once we've written it out _cacheStream.SetLength(0); } // default flush behavior _stream.Flush(); } /// <summary> /// /// </summary> /// <param name="buffer"></param> /// <param name="offset"></param> /// <param name="count"></param> /// <returns></returns> public override int Read(byte[] buffer, int offset, int count) { return _stream.Read(buffer, offset, count); } /// <summary> /// Overriden to capture output written by ASP.NET and captured /// into a cached stream that is written out later when Flush() /// is called. /// </summary> /// <param name="buffer"></param> /// <param name="offset"></param> /// <param name="count"></param> public override void Write(byte[] buffer, int offset, int count) { if ( IsCaptured ) { // copy to holding buffer only - we'll write out later _cacheStream.Write(buffer, 0, count); _cachePointer += count; } // just transform this buffer if (TransformWrite != null) buffer = OnTransformWrite(buffer); if (TransformWriteString != null) buffer = OnTransformWriteStringInternal(buffer); if (!IsOutputDelayed) _stream.Write(buffer, offset, buffer.Length); } } The key features are the events and corresponding OnXXX methods that handle the event hookups, and the Write() and Flush() methods of the stream implementation. All the rest of the members tend to be plain jane passthrough stream implementation code without much consequence. I do love the way Action<t> and Func<T> make it so easy to create the event signatures for the various events – sweet. A few Things to consider Performance Response.Filter is not great for performance in general as it adds another layer of indirection to the ASP.NET output pipeline, and this implementation in particular adds a memory hit as it basically duplicates the response output into the cached memory stream which is necessary since you may have to look at the entire response. If you have large pages in particular this can cause potentially serious memory pressure in your server application. So be careful of wholesale adoption of this (or other) Response.Filters. Make sure to do some performance testing to ensure it’s not killing your app’s performance. Response.Filter works everywhere A few questions came up in comments and discussion as to capturing ALL output hitting the site and – yes you can definitely do that by assigning a Response.Filter inside of a module. If you do this however you’ll want to be very careful and decide which content you actually want to capture especially in IIS 7 which passes ALL content – including static images/CSS etc. through the ASP.NET pipeline. So it is important to filter only on what you’re looking for – like the page extension or maybe more effectively the Response.ContentType. Response.Filter Chaining Originally I thought that filter chaining doesn’t work at all due to a bug in the stream implementation code. But it’s quite possible to assign multiple filters to the Response.Filter property. So the following actually works to both compress the output and apply the transformed content: WebUtils.GZipEncodePage(); ResponseFilterStream filter = new ResponseFilterStream(Response.Filter); filter.TransformString += filter_TransformString; Response.Filter = filter; However the following does not work resulting in invalid content encoding errors: ResponseFilterStream filter = new ResponseFilterStream(Response.Filter); filter.TransformString += filter_TransformString; Response.Filter = filter; WebUtils.GZipEncodePage(); In other words multiple Response filters can work together but it depends entirely on the implementation whether they can be chained or in which order they can be chained. In this case running the GZip/Deflate stream filters apparently relies on the original content length of the output and chokes when the content is modified. But if attaching the compression first it works fine as unintuitive as that may seem. Resources Download example code Capture Output from ASP.NET Pages © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

    Read the article

  • Web Browser Control &ndash; Specifying the IE Version

    - by Rick Strahl
    I use the Internet Explorer Web Browser Control in a lot of my applications to display document type layout. HTML happens to be one of the most common document formats and displaying data in this format – even in desktop applications, is often way easier than using normal desktop technologies. One issue the Web Browser Control has that it’s perpetually stuck in IE 7 rendering mode by default. Even though IE 8 and now 9 have significantly upgraded the IE rendering engine to be more CSS and HTML compliant by default the Web Browser control will have none of it. IE 9 in particular – with its much improved CSS support and basic HTML 5 support is a big improvement and even though the IE control uses some of IE’s internal rendering technology it’s still stuck in the old IE 7 rendering by default. This applies whether you’re using the Web Browser control in a WPF application, a WinForms app, a FoxPro or VB classic application using the ActiveX control. Behind the scenes all these UI platforms use the COM interfaces and so you’re stuck by those same rules. Rendering Challenged To see what I’m talking about here are two screen shots rendering an HTML 5 doctype page that includes some CSS 3 functionality – rounded corners and border shadows - from an earlier post. One uses IE 9 as a standalone browser, and one uses a simple WPF form that includes the Web Browser control. IE 9 Browser:   Web Browser control in a WPF form: The IE 9 page displays this HTML correctly – you see the rounded corners and shadow displayed. Obviously the latter rendering using the Web Browser control in a WPF application is a bit lacking. Not only are the new CSS features missing but the page also renders in Internet Explorer’s quirks mode so all the margins, padding etc. behave differently by default, even though there’s a CSS reset applied on this page. If you’re building an application that intends to use the Web Browser control for a live preview of some HTML this is clearly undesirable. Feature Delegation via Registry Hacks Fortunately starting with Internet Explore 8 and later there’s a fix for this problem via a registry setting. You can specify a registry key to specify which rendering mode and version of IE should be used by that application. These are not global mind you – they have to be enabled for each application individually. There are two different sets of keys for 32 bit and 64 bit applications. 32 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: yourapplication.exe 64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: yourapplication.exe The value to set this key to is (taken from MSDN here) as decimal values: 9999 (0x270F) Internet Explorer 9. Webpages are displayed in IE9 Standards mode, regardless of the !DOCTYPE directive. 9000 (0x2328) Internet Explorer 9. Webpages containing standards-based !DOCTYPE directives are displayed in IE9 mode. 8888 (0x22B8) Webpages are displayed in IE8 Standards mode, regardless of the !DOCTYPE directive. 8000 (0x1F40) Webpages containing standards-based !DOCTYPE directives are displayed in IE8 mode. 7000 (0x1B58) Webpages containing standards-based !DOCTYPE directives are displayed in IE7 Standards mode.   The added key looks something like this in the Registry Editor: With this in place my Html Html Help Builder application which has wwhelp.exe as its main executable now works with HTML 5 and CSS 3 documents in the same way that Internet Explorer 9 does. Incidentally I accidentally added an ‘empty’ DWORD value of 0 to my EXE name and that worked as well giving me IE 9 rendering. Although not documented I suspect 0 (or an invalid value) will default to the installed browser. Don’t have a good way to test this but if somebody could try this with IE 8 installed that would be great: What happens when setting 9000 with IE 8 installed? What happens when setting 0 with IE 8 installed? Don’t forget to add Keys for Host Environments If you’re developing your application in Visual Studio and you run the debugger you may find that your application is still not rendering right, but if you run the actual generated EXE from Explorer or the OS command prompt it works. That’s because when you run the debugger in Visual Studio it wraps your application into a debugging host container. For this reason you might want to also add another registry key for yourapp.vshost.exe on your development machine. If you’re developing in Visual FoxPro make sure you add a key for vfp9.exe to see the rendering adjustments in the Visual FoxPro development environment. Cleaner HTML - no more HTML mangling! There are a number of additional benefits to setting up rendering of the Web Browser control to the IE 9 engine (or even the IE 8 engine) beyond the obvious rendering functionality. IE 9 actually returns your HTML in something that resembles the original HTML formatting, as opposed to the IE 7 default format which mangled the original HTML content. If you do the following in the WPF application: private void button2_Click(object sender, RoutedEventArgs e) { dynamic doc = this.webBrowser.Document; MessageBox.Show(doc.body.outerHtml); } you get different output depending on the rendering mode active. With the default IE 7 rendering you get: <BODY><DIV> <H1>Rounded Corners and Shadows - Creating Dialogs in CSS</H1> <DIV class=toolbarcontainer><A class=hoverbutton href="./"><IMG src="../../css/images/home.gif"> Home</A> <A class=hoverbutton href="RoundedCornersAndShadows.htm"><IMG src="../../css/images/refresh.gif"> Refresh</A> </DIV> <DIV class=containercontent> <FIELDSET><LEGEND>Plain Box</LEGEND><!-- Simple Box with rounded corners and shadow --> <DIV style="BORDER-BOTTOM: steelblue 2px solid; BORDER-LEFT: steelblue 2px solid; WIDTH: 550px; BORDER-TOP: steelblue 2px solid; BORDER-RIGHT: steelblue 2px solid" class="roundbox boxshadow"> <DIV style="BACKGROUND: khaki" class="boxcontenttext roundbox">Simple Rounded Corner Box. </DIV></DIV></FIELDSET> <FIELDSET><LEGEND>Box with Header</LEGEND> <DIV style="BORDER-BOTTOM: steelblue 2px solid; BORDER-LEFT: steelblue 2px solid; WIDTH: 550px; BORDER-TOP: steelblue 2px solid; BORDER-RIGHT: steelblue 2px solid" class="roundbox boxshadow"> <DIV class="gridheaderleft roundbox-top">Box with a Header</DIV> <DIV style="BACKGROUND: khaki" class="boxcontenttext roundbox-bottom">Simple Rounded Corner Box. </DIV></DIV></FIELDSET> <FIELDSET><LEGEND>Dialog Style Window</LEGEND> <DIV style="POSITION: relative; WIDTH: 450px" id=divDialog class="dialog boxshadow" jQuery16107208195684204002="2"> <DIV style="POSITION: relative" class=dialog-header> <DIV class=closebox></DIV>User Sign-in <DIV class=closebox jQuery16107208195684204002="3"></DIV></DIV> <DIV class=descriptionheader>This dialog is draggable and closable</DIV> <DIV class=dialog-content><LABEL>Username:</LABEL> <INPUT name=txtUsername value=" "> <LABEL>Password</LABEL> <INPUT name=txtPassword value=" "> <HR> <INPUT id=btnLogin value=Login type=button> </DIV> <DIV class=dialog-statusbar>Ready</DIV></DIV></FIELDSET> </DIV> <SCRIPT type=text/javascript>     $(document).ready(function () {         $("#divDialog")             .draggable({ handle: ".dialog-header" })             .closable({ handle: ".dialog-header",                 closeHandler: function () {                     alert("Window about to be closed.");                     return true;  // true closes - false leaves open                 }             });     }); </SCRIPT> </DIV></BODY> Now lest you think I’m out of my mind and create complete whacky HTML rooted in the last century, here’s the IE 9 rendering mode output which looks a heck of a lot cleaner and a lot closer to my original HTML of the page I’m accessing: <body> <div>         <h1>Rounded Corners and Shadows - Creating Dialogs in CSS</h1>     <div class="toolbarcontainer">         <a class="hoverbutton" href="./"> <img src="../../css/images/home.gif"> Home</a>         <a class="hoverbutton" href="RoundedCornersAndShadows.htm"> <img src="../../css/images/refresh.gif"> Refresh</a>     </div>         <div class="containercontent">     <fieldset>         <legend>Plain Box</legend>                <!-- Simple Box with rounded corners and shadow -->             <div style="border: 2px solid steelblue; width: 550px;" class="roundbox boxshadow">                              <div style="background: khaki;" class="boxcontenttext roundbox">                     Simple Rounded Corner Box.                 </div>             </div>     </fieldset>     <fieldset>         <legend>Box with Header</legend>         <div style="border: 2px solid steelblue; width: 550px;" class="roundbox boxshadow">                          <div class="gridheaderleft roundbox-top">Box with a Header</div>             <div style="background: khaki;" class="boxcontenttext roundbox-bottom">                 Simple Rounded Corner Box.             </div>         </div>     </fieldset>       <fieldset>         <legend>Dialog Style Window</legend>         <div style="width: 450px; position: relative;" id="divDialog" class="dialog boxshadow">             <div style="position: relative;" class="dialog-header">                 <div class="closebox"></div>                 User Sign-in             <div class="closebox"></div></div>             <div class="descriptionheader">This dialog is draggable and closable</div>                    <div class="dialog-content">                             <label>Username:</label>                 <input name="txtUsername" value=" " type="text">                 <label>Password</label>                 <input name="txtPassword" value=" " type="text">                                 <hr/>                                 <input id="btnLogin" value="Login" type="button">                        </div>             <div class="dialog-statusbar">Ready</div>         </div>     </fieldset>     </div> <script type="text/javascript">     $(document).ready(function () {         $("#divDialog")             .draggable({ handle: ".dialog-header" })             .closable({ handle: ".dialog-header",                 closeHandler: function () {                     alert("Window about to be closed.");                     return true;  // true closes - false leaves open                 }             });     }); </script>        </div> </body> IOW, in IE9 rendering mode IE9 is much closer (but not identical) to the original HTML from the page on the Web that we’re reading from. As a side note: Unfortunately, the browser feature emulation can't be applied against the Html Help (CHM) Engine in Windows which uses the Web Browser control (or COM interfaces anyway) to render Html Help content. I tried setting up hh.exe which is the help viewer, to use IE 9 rendering but a help file generated with CSS3 features will simply show in IE 7 mode. Bummer - this would have been a nice quick fix to allow help content served from CHM files to look better. HTML Editing leaves HTML formatting intact In the same vane, if you do any inline HTML editing in the control by setting content to be editable, IE 9’s control does a much more reasonable job of creating usable and somewhat valid HTML. It also leaves the original content alone other than the text your are editing or adding. No longer is the HTML output stripped of excess spaces and reformatted in IEs format. So if I do: private void button3_Click(object sender, RoutedEventArgs e) { dynamic doc = this.webBrowser.Document; doc.body.contentEditable = true; } and then make some changes to the document by typing into it using IE 9 mode, the document formatting stays intact and only the affected content is modified. The created HTML is reasonably clean (although it does lack proper XHTML formatting for things like <br/> <hr/>). This is very different from IE 7 mode which mangled the HTML as soon as the page was loaded into the control. Any editing you did stripped out all white space and lost all of your existing XHTML formatting. In IE 9 mode at least *most* of your original formatting stays intact. This is huge! In Html Help Builder I have supported HTML editing for a long time but the HTML mangling by the Web Browser control made it very difficult to edit the HTML later. Previously IE would mangle the HTML by stripping out spaces, upper casing all tags and converting many XHTML safe tags to its HTML 3 tags. Now IE leaves most of my document alone while editing, and creates cleaner and more compliant markup (with exception of self-closing elements like BR/HR). The end result is that I now have HTML editing in place that's much cleaner and actually capable of being manually edited. Caveats, Caveats, Caveats It wouldn't be Internet Explorer if there weren't some major compatibility issues involved in using this various browser version interaction. The biggest thing I ran into is that there are odd differences in some of the COM interfaces and what they return. I specifically ran into a problem with the document.selection.createRange() function which with IE 7 compatibility returns an expected text range object. When running in IE 8 or IE 9 mode however. I could not retrieve a valid text range with this code where loEdit is the WebBrowser control: loRange = loEdit.document.selection.CreateRange() The loRange object returned (here in FoxPro) had a length property of 0 but none of the other properties of the TextRange or TextRangeCollection objects were available. I figured this was due to some changed security settings but even after elevating the Intranet Security Zone and mucking with the other browser feature flags pertaining to security I had no luck. In the end I relented and used a JavaScript function in my editor document that returns a selection range object: function getselectionrange() { var range = document.selection.createRange(); return range; } and call that JavaScript function from my host applications code: *** Use a function in the document to get around HTML Editing issues loRange = loEdit.document.parentWindow.getselectionrange(.f.) and that does work correctly. This wasn't a big deal as I'm already loading a support script file into the editor page so all I had to do is add the function to this existing script file. You can find out more how to call script code in the Web Browser control from a host application in a previous post of mine. IE 8 and 9 also clamp down the security environment a little more than the default IE 7 control, so there may be other issues you run into. Other than the createRange() problem above I haven't seen anything else that is breaking in my code so far though and that's encouraging at least since it uses a lot of HTML document manipulation for the custom editor I've created (and would love to replace - any PROFESSIONAL alternatives anybody?) Registry Key Installation for your Application It’s important to remember that this registry setting is made per application, so most likely this is something you want to set up with your installer. Also remember that 32 and 64 bit settings require separate settings in the registry so if you’re creating your installer you most likely will want to set both keys in the registry preemptively for your application. I use Tarma Installer for all of my application installs and in Tarma I configure registry keys for both and set a flag to only install the latter key group in the 64 bit version: Because this setting is application specific you have to do this for every application you install unfortunately, but this also means that you can safely configure this setting in the registry because it is after only applied to your application. Another problem with install based installation is version detection. If IE 8 is installed I’d want 8000 for the value, if IE 9 is installed I want 9000. I can do this easily in code but in the installer this is much more difficult. I don’t have a good solution for this at the moment, but given that the app works with IE 7 mode now, IE 9 mode is just a bonus for the moment. If IE 9 is not installed and 9000 is used the default rendering will remain in use.   It sure would be nice if we could specify the IE rendering mode as a property, but I suspect the ActiveX container has to know before it loads what actual version to load up and once loaded can only load a single version of IE. This would account for this annoying application level configuration… Summary The registry feature emulation has been available for quite some time, but I just found out about it today and started experimenting around with it. I’m stoked to see that this is available as I’d pretty much given up in ever seeing any better rendering in the Web Browser control. Now at least my apps can take advantage of newer HTML features. Now if we could only get better HTML Editing support somehow <snicker>… ah can’t have everything.© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET  FoxPro  Windows  

    Read the article

  • WPF 3.5 RenderTargetBitmap memory hog

    - by kingRauk
    I have a 3.5 WPF application that use's RenderTargetBitmap. It eat's memory like a big bear. It's is a know problem in 3.5 that RenderTargetBitmap.Render has memory problems. Have find some solutions for it, but i doesnt help. https://connect.microsoft.com/VisualStudio/feedback/details/489723/rendertargetbitmap-render-method-causes-a-memory-leak Program takes too much memory And more... Does anyway have any more ideas to solve it... static Image Method(FrameworkElement e, int width, int height) { const int dpi = 192; e.Width = width; e.Height = height; e.Arrange(new Rect(0, 0, width, height)); e.UpdateLayout(); if(element is Graph) (element as Graph).UpdateComponents(); var bitmap = new RenderTargetBitmap((int)(width*dpi/96.0), (int)(height*dpi/96.0), dpi, dpi, PixelFormats.Pbgra32); bitmap.Render(element); var encoder = new PngBitmapEncoder(); encoder.Frames.Add(BitmapFrame.Create(bitmap)); using (var stream = new MemoryStream()) { encoder.Save(stream); element.Clip = null; Dispose(element); bitmap.Freeze(); DisposeRender(bitmap); bitmap.Clear(); GC.Collect(); GC.WaitForPendingFinalizers(); return System.Drawing.Image.FromStream(stream); } } public static void Dispose(FrameworkElement element) { GC.Collect(); GC.WaitForPendingFinalizers(); GC.Collect(); } public static void DisposeRender(RenderTargetBitmap bitmap) { if (bitmap != null) bitmap.Clear(); bitmap = null; GC.Collect(); GC.WaitForPendingFinalizers(); }

    Read the article

  • JavaScriptSerializer().Serialize(Entity Framework object)

    - by loviji
    May be, it is not so problematic for you. but i'm trying first time with json serialization. and also read other articles in stackowerflow. I have created Entity Framework data model. then by method get all data from object: private uqsEntities _db = new uqsEntities(); //get all data from table sysMainTableColumns where tableName=paramtableName public List<sysMainTableColumns> getDataAboutMainTable(string tableName) { return (from column in _db.sysMainTableColumns where column.TableName==tableName select column).ToList(); } my webservice: public string getDataAboutMainTable() { penta.DAC.Tables dictTable = new penta.DAC.Tables(); var result = dictTable.getDataAboutMainTable("1"); return new JavaScriptSerializer().Serialize(result); } and jQuery ajax method $('#loadData').click(function() { $.ajax({ type: "POST", url: "WS/ConstructorWS.asmx/getDataAboutMainTable", data: "{}", contentType: "application/json; charset=utf-8", dataType: "json", success: function(msg) { $("#jsonResponse").html(msg); var data = eval("(" + msg + ")"); //do something with data }, error: function(msg) { } }); }); problem with data, code fails there. and i think i'm not use JavaScriptSerializer().Serialize() method very well. Please, tell me, what a big mistake I made in C# code?

    Read the article

  • Interpret Objective C scripts at runtime on iPhone?

    - by Brad Parks
    Is there anyway to load an objective c script at runtime, and run it against the classes/methods/objects/functions in the current iPhone app? The reason i ask is that I've been playing around with iPhone wax, a lua interpreter that can be embedded in an iPhone app, and it works very nicely, in the sense that any object/method/function that's publically available in your Objective C code is automatically bridged, and available in lua. This allows you to rapidly prototype applications by simply making the core of your app be lua files that are in the users documents directory. Just reload the app, and you can test out changes to your lua files without needing to rebuild the app in XCode - a big time saver! But, with Apples recent 3.1.3 SDK stuff, it got me thinking that the safest approach for doing this type of rapid prototypeing would be if you could use Objective C as the interpreted code... That way, worst case scenario, you could just compile it into your app before your release, instead. I have heard that the lua source can be compiled to byte code, and linked in at build time, but I think the ultimate safe thing would be if the scripted source was in objective c, not lua. This leads me to wondering (i've searched, but come up with nothing) if there are any examples on how to embed an Objective C Interpreter in an iPhone app? This would allow you to rapidly prototype your app against the current classes that are built into your binary, and, when your about to deploy your app, instead of running the classes through the in app interpreter, you compile them in instead.

    Read the article

  • resizing row's height in QTreeWidget/QTreeView

    - by serge
    Hi everyone, I have some problems with sizing row's height in QTreeWidget. I use QStyledItemDelegate with QPlainTextEdit. During editing text in QPlainTextEdit i check for changes with a help of: rect = self.blockBoundingRect(self.firstVisibleBlock()) and if text's height changes i resize editor size and need row in QTreeWidget also resizing. But i don't know how to inform TreeWidget or a Delegate about changes. I tried to initialize editor with index, that i could use in a future, but Delegate creates new editor every time and i failed to use signals. Also I used following function to catch resize event, but it' doesn't: bool QAbstractItemDelegate::editorEvent ( QEvent * event, QAbstractItemModel * model, const QStyleOptionViewItem & option, const QModelIndex & index ) How can i bound editor's size changes with TreeWidget? And one more thing, by default all items (cells) in TreeWidget have -1 or some big value as default width. I need whole text in cell to be visible, so how can i limit cells width only by visible range and make it expand in height? I want for it the same behavior as in instance a table in MSWord. Thank you in advance, Serge

    Read the article

  • Git subtree not properly using .gitignore when doing a partial clone

    - by D W
    I am a graduate student with many scripts, bibliography data in bibtex, thesis draft in latex, presentations in open office, posters in scribus, and figures and result data. I would like to put everything in one project under version control. Then when I need to work on a portion such as the bibliography data, I would like to check that subdirectory out, modify it as necessary and merge it back.I would like the ability to check out one version to my home computer, and a different one to my work computer and make changes to each independently and eventually merge them back. I would also like to be able to check out a piece of code from this big project and import it with versioning into a separate project. If I may changes I'd like to be able to merge them back to the original project. Based on my understanding git subtree can do this. http://github.com/apenwarr/git-subtree There is an example that is along the lines of what I'm trying to do at: http://psionides.jogger.pl/2010/02/04/sharing-code-between-projects-with-git-subtree/ Say the trunk of my project contained the directories: (bib bin cfg data fig src todo). When I use git subtree split -P bib -b export git checkout export I get a the bib directory, plus all files that should have been ignored or considered binary based on .gitignore such as the src directory and everything in it that ends in a tilde or the ./data directory. dwickrama@DWwork:~/research/trunk$ ls * -r biblography.bib JabRef src: script1.sh~ README~ script2.sh~ script3.sh~ script4.R~ script5.awk~ script5.py~ cfg: cfgFile1.ini~ cfgFile2.ini~ cfgFile3.ini~ bin: bigBinaryPackage1 bigBinaryPackage2 dwickrama@DWwork:~/research/trunk$ My .gitignore file is as follows: *.doc diff=word *.tex diff=tex *.bib diff=bibtex *.py diff=python *.eps binary *.jpg binary *.png binary ./bin/* binary *~ How do I prevent this?

    Read the article

  • Sharepoint Lists.GetListItems Method rowLimit problem

    - by Linda
    In SharePoint I am using the default view of a list. When I use GetListItems method I can pass into it the following: public XmlNode GetListItems ( string listName, string viewName, XmlNode query, XmlNode viewFields, string rowLimit, XmlNode queryOptions, string webID ) I am passing in "" for the viewName and am passing a rowLimit of 1000. By Default view only returns 100 items. 100 Items are still being returned not 1000. Can you use the rowLimit when not specifying a view? Is it possible to bring back 1000 items using the query instead? I do not really want to use a GUID for the viewName as I would have to look it up for each list and perform a big refactor. Update I am now using the guid of the view and my list still returns the incorrect number of items. I know the guid is being used as I sued an incorrect one and it errord out. Any ideas what could be wrong? The code that is being sent to the service is as follows: <GetListItems xmlns='http://schemas.microsoft.com/sharepoint/soap/'> <listName>Media Outlet</listName> <viewName>{2822F0D9-A905-44B5-8913-34E6497F1AAF}</viewName> <query><Query><Where><Eq><FieldRef Name='Outlet_x0020_Type' /><Value Type='Lookup'></Value></Eq></Where><OrderBy><FieldRef Name='Title' /></OrderBy></Query></query> <ViewFields></ViewFields> <RowLimit>10000</RowLimit> <QueryOptions></QueryOptions> <webID></webID> </GetListItems>

    Read the article

  • Pass dataset to subreport with SQL Server Reporting Services

    - by Juliet
    I'm using SQL Server Reporting Services and the report designer that comes with Visual Studio. I've got a really big report. It's actually so large that Visual Studio hangs (sometimes for hours at a time) or just crashes when I make changes. There is preciously little I can do to solve the problem, so I've decided to just move the bottom half of the report into a sub-report. So, I started with one enormous, unresponsive report and ended with two small, manageable reports -- surprisingly, this actually works. One problem: my subreport uses the same data as my main report. Right now, it populates its dataset by re-querying the database. The extra round-trip to the database causes the report to take twice as long to generate; up from 45 minutes to 1 1/2 hours to generate. I'd like to avoid hitting the database again, and instead use the same dataset in both reports. How can I share or pass a dataset between a report and subreport?

    Read the article

  • UISearchBar and UINavigationItem

    - by tbehunin
    I can't seem to get a UISearchBar to position itself from the far left to the far right in the navigation bar. In the -(void)viewDidLoad method, I have the following code: `UISearchBar *sb = [[UISearchBar alloc] initWithFrame:self.tableView.tableHeaderView.frame]; sb.delegate = self; self.navigationItem.titleView = sb; [sb sizeToFit]; [sb release];` When you build and run, it looks just fine at first glance. However, looking more closely, you can tell there is a margin/space on the left. This wouldn't be a big deal in the grand scheme of things, but when I tap the search bar to start a search, I animate the cancel button into view. Because the search bar is positioned slightly to the right, the animation is jerky and the cancel button falls off the end like so: link text It seems as if the UINavigationItem is like a table with three cells, where there is a padding on the first and last which I can't remove - nor does there seem to be a way to 'merge' it all together and then place the search bar there. I know this look is possible, because the AppStore search has a search bar in the navigation bar and it goes all the way to the edges. Anyone know how to get the search bar to go all the way to the edges so my slide-in cancel button animation will work properly?

    Read the article

  • Translating EventAggregators usage of SynchronizationContext to VB.Net

    - by Phil Sayers
    Working with a fairly large VB.Net back office winforms application. 1 million+ LOC. Big ball of mud, 90% of all code is in Forms & other UI controls. Slowly introducing better architecture as time & recources allows, We've been using ideas from the EventAggrgator by Jeremy Miller. http://codebetter.com/blogs/jeremy.miller/archive/2008/01/11/build-your-own-cab-extensible-pub-sub-event-aggregator-with-generics.aspx Initially I stripped out the usage of SynchronizationContext. Now I'm trying to introduce it back, and I'm struggling with the translation of the lamda stuff from c# to vb.net. Specifically this line of c# _context.Send(delegate { receiver.Handle(subject); }, null); This is the vb.net I have so far: _context.Send(New SendOrPostCallback(AddressOf listener.Handle(message)), Nothing) The error I'm getting is listener.Handle(message) <-- AddressOf operand must be the name of a method. I'm sure I'm missing something simple, but after staring at this for 2 days, I'm lost.

    Read the article

  • grep --exclude/--include syntax (do not grep through certain files)

    - by Piskvor
    I'm looking for the string "foo=" (without quotes) in text files in a directory tree. It's on a common Linux machine, I have bash shell: grep -ircl "foo=" * In the directories are also many binary files which match "foo=". As these results are not relevant and slow down the search, I want grep to skip searching these files (mostly JPEG and PNG images): how would I do that? I know there are the --exclude=PATTERN and --include=PATTERN options, but what is the pattern format? manpage of grep says: --include=PATTERN Recurse in directories only searching file matching PATTERN. --exclude=PATTERN Recurse in directories skip file matching PATTERN. Searching on grep include, grep include exclude, grep exclude and variants did not find anything relevant If there's a better way of grepping only in certain files, I'm all for it; moving the offending files is not an option, I can't search only certain directories (the directory structure is a big mess, with everything everywhere). Also, I can't install anything, so I have to do with common tools (like grep or the suggested find). UPDATES: @Adam Rosenfield's answer is just what I was looking for: grep -ircl --exclude=*.{png,jpg} "foo=" * @rmeador's answer is also a good solution: grep -Ir --exclude="*\.svn*" "pattern" * It searches recursively, ignores binary files, and doesn't look inside Subversion hidden folders.(...)

    Read the article

  • Making flexible C# code in MVC2 for Stored Procedures

    - by cc0
    Thanks to Darin Dimitrov's suggestion I got a big step further in understanding good MVC code, but I'm having some problems making it flexible. I implemented Darin's suggested solution, and it works perfectly for single controllers. However I'm having some trouble implementing it with some flexibility. What I'm looking for is this; To be able to make dynamic column names in json Instead of using "Column1: 'value', ..." and "Column2: 'value', ..." inside the json, I'd like to use for example "id: 'value', ..." and "place: 'value' ..." for one stored procedure, and "animal" and "type" in another (inside the json format). To be able to make dynamic amounts of columns dependent on which stored procedure is called Some stored procedures I'll want to read more than 2 rows from, is there a smart way of accomplishing that? To be able to make numeric (floats and integers) rows from the database be presented inside the json without quotes Like this (name and age); { Column1: "John", Column2: 53 }, I would be very grateful for any feedback and suggestions / code examples I can get here. Even imperfect ones.

    Read the article

  • Wrong figures numbering - Package caption Error: Continued 'figure' after 'table'

    - by Eduardo
    Hello I am having a problem with the numbering of figures using Latex, I am getting this error message: Package caption Error: Continued 'figure' after 'table' This is my code: \begin{table} \centering \subfloat[Tabla1\label{tab:Tabla1}]{ \small \begin{tabular}{ | c | c | c | c | c |} \hline \multicolumn{5}{|c|}{\textbf{Tabla 1}} \\ \hline ... ... \end{tabular} } \qquad \subfloat[Tabla2\label{tab:Tabla2}]{ \small \begin{tabular}{ | c | c | c | c | c |} \hline \multicolumn{5}{|c|}{\textbf{Tabla 2}} \\ \hline ... ... \end{tabular} } \caption{These are tables} \label{tab:Tables} \end{table} \begin{figure} \centering \subfloat[][Figure 1]{\label{fig:fig1}\includegraphics[width = 14cm]{fig1}} \qquad \subfloat[][Figure 2]{\label{fig:fig2}\includegraphics[width = 14cm]{fig2}} \end{figure} \begin{figure}[t] \ContinuedFloat \subfloat[][Figure 2]{\label{fig:fig3}\includegraphics[width = 14cm]{fig3}} \caption{Those are figures} \label{fig:Figures} \end{figure} \newpage What I want to do, it is to have this configuration: Table Table Figure 1 Figure 2 Figure 3 Since Figure 1 and Figure 2 are too big to fit vertically I want the Figure 3 to be alone in another page that's why I have the \ContinuedFloat. Externally looks fine but the problem is the numbering, I am getting for the Figures the number 5.2, that is the same number that a Figure I have before (The correct number should be 5.3). However if I try to reference the figures: \ref{fig:fig1}, \ref{fig:fig2} y \ref{fig:fig2} I get: 5.3a, 5.3b y 5.2c The two first right the last one wrong. I have been stuck with this for hours any ideas?. Thans a lot in advance

    Read the article

  • Using git subtree to clone a subdirectory of a project with versioning history then merge it back af

    - by D W
    I am a graduate student with many scripts, bibliography data in bibtex, thesis draft in latex, presentations in open office, posters in scribus, and figures and result data. I would like to put everything in one project under version control. Then when I need to work on a portion such as the bibliography data, I would like to check that subdirectory out, modify it as necessary and merge it back.I would like the ability to check out one version to my home computer, and a different one to my work computer and make changes to each independently and eventually merge them back. I would also like to be able to check out a piece of code from this big project and import it with versioning into a separate project. If I may changes I'd like to be able to merge them back to the original project. Based on my understanding git subtree can do this. http://github.com/apenwarr/git-subtree There is an example that is along the lines of what I'm trying to do at: http://psionides.jogger.pl/2010/02/04/sharing-code-between-projects-with-git-subtree/ This code is from that site: git clone git://git2.kernel.org/pub/scm/git/git.git newtree=$(git subtree split --prefix=gitweb --annotate='(split) ' \ 0a8f4f0^.. --onto=1130ef3 --rejoin) git branch latest_gitweb $newtree gitk latest_gitweb Say the trunk of my project contained the directories: (bib bin cfg data fig src todo). How would I use git-subtree to split off the bib (bibliography) directory with versioning? When I use git-subtree split --prefix=bib I get 884842f6f4e9896e2e4e9402ee0ef762cd617257 as output, but I don't know where to go from there.

    Read the article

  • Using ViewModel in ASP.NET MVC with FluentValidation

    - by Brian McCord
    I am using ASP.NET MVC with Entity Framework POCO classes and the FluentValidation framework. It is working well, and the validation is happening as it should (as if I were using DataAnnotations). I have even gotten client-side validation working. And I'm pretty pleased with it. Since this is a test application I am writing just to see if I can get new technologies working together (and learn them along the way), I am now ready to experiment with using ViewModels instead of just passing the actual Model to the view. I'm planning on using something like AutoMapper in my service to do the mapping back and forth from Model to ViewModel but I have a question first. How is this going to affect my validation? Should my validation classes (written using FluentValidation) be written against the ViewModel instead of the Model? Or does it need to happen in both places? One of the big deals about DataAnnotations (and FluentValidation) was that you could have validation in one place that would work "everywhere". And it fulfills that promise (mostly), but if I start using ViewModels, don't I lose that ability and have to go back to putting validation in two places? Or am I just thinking about it wrong?

    Read the article

  • iPhone core data problem : referenceData64 only defined for abstract class

    - by occe
    I have an application that downloads/parses a big XML file and store the information using core data (approx. 4000 objects (entities)). The XML is loaded/parsed in a different thread, which has its own NSManagedObjectContext. When trying to save the entities to the persistent store, I sometimes get the following error (about 20%) 2010-03-03 23:41:42.802 xxx[7487:4203] Exception in XML saving 2010-03-03 23:41:42.802 xxx[7487:4203] Description: * -_referenceData64 only defined for abstract class. Define -[NSTemporaryObjectID_default _referenceData64]! 2010-03-03 23:41:42.803 xxx[7487:4203] Name: NSInvalidArgumentException 2010-03-03 23:41:42.804 xxx[7487:4203] UserInfo: (null) 2010-03-03 23:41:42.805 xxx[7487:4203] Reason: * -_referenceData64 only defined for abstract class. Define -[NSTemporaryObjectID_default _referenceData64]! I have a simple integer to keep track of the entities the application creates compared to the insertedObjects property in the NSManagedObjectContext before saving, and when I get the error, these numbers do not match, insertedObjects in the NSManagedObjectContext is missing about 10 entities. I do not know how I should continue to investigate this problem, anyone has any idea how to fix this? Thanks /oscar

    Read the article

  • Could not find schema information for the element 'castle'.

    - by Richard77
    Hello! I'm creating a Custom tag in my web.config. I first wrote the following entry under the configSections section. <section name="castle" type="Castle.Windsor.Configuration.AppDomain.CastleSectionHandler, Castle.Windsor" /> But, when I try to create a castle node inside the configuration node as below <castle> <components> </components> </castle> I get the following error message:"*Could not find schema information for the element 'castle*'." "*Could not find schema information for the element 'components'***." Am I missing something? I can't find why. And, if I run the application anyway, I get the following error "Could not find section 'Castle' in the configuration file associated with this domain." Ps.// The sample comes from "Pro ASP.NET MVC Framework"/Steven Sanderson/APress ISBN-13 (pbk): 978-1-4302-1007-8" on page 99. Thank you for the help ============================================================ Since I believe to have done exactly what's said in the book and did not succed, I ask the same question in different terms. How do I add a new node using the above information? ============================================================================= Thank you. I did what you said and do not have the two warnings. However, I've go a big new warning: "The element 'configuration' in namespace 'MyWindsorSchema' has invalid child element 'configSections' in namespace 'MyWindsorSchema'. List of possible elements expected: 'include, properties, facilities, components' in namespace 'MyWindsorSchema'."

    Read the article

  • Why to build own CMS?

    - by ile
    On my first job interview, I was asked why did I build my own CMS? Why not to use one of existing CMS, Wordpress, Joomla, Drupal...? At first, I was stunned. I couldn't immediately recall all of my reasons for building my own CMS, but this was definitely one of the main reasons: It's my code and if I want to change something in that CMS (which I often have to do, because each website I build needs CMS with different functions) it's not a big problem. For some time I've been using Wordpress and one of the main things that distracted me from using it was discovering bugs in code that wasn't written by me and this bugs were often, especially if I made some changes to CMS or added a plugin... Here, I can find these 8 reasons why NOT to build own CMS: It won’t meet users’ needs It’s too much work It won’t be a standard solution It won’t be extendible fast enough It won’t be tested well enough It won’t be easily changeable It won’t add any value Create content, not functionality Quote from the same page: So the main question to ask yourself is: ‘Why am I really trying to re-solve a problem that has already been solved before?’ Well, I definitely agree that it's hard to invent CMS that hasn't been already invented, but on other hand, I think every CMS is (or should be) individual... it maybe won't have a million of functions, it will have 3 functions but their usage will be clear (to a user) and do all that one site needs to have. I think also that it is not good to give to a client a CMS with a lot of functions that are never used and it looks probably more professional when website and CMS together look like one product. I would also like to comment some quote parts: "It’s too much work" - I agree, but when using existing CMS and customizing it to website needs and can sometimes be very hard job or mission impossible. "It won’t be easily changeable" - I disagree with this one. What is your opinion on this one, why did you develop or didn't develop your own CMS? Ile

    Read the article

  • Is parsing JSON faster than parsing XML

    - by geme_hendrix
    I'm creating a sophisticated JavaScript library for working with my company's server side framework. The server side framework encodes its data to a simple XML format. There's no fancy namespacing or anything like that. Ideally I'd like to parse all of the data in the browser as JSON. However, if I do this I need to rewrite some of the server side code to also spit out JSON. This is a pain because we have public APIs that I can't easily change. What I'm really concerned about here is performance in the browser of parsing JSON versus XML. Is there really a big difference to be concerned about? Or should I exclusively go for JSON? Does anyone have any experience or benchmarks in the performance difference between the two? I realize that most modern web developers would probably opt for JSON and I can see why. However, I really am just interested in performance. If there's a proven massive difference then I'm prepared to spend the extra effort in generating JSON server side for the client.

    Read the article

  • How to make Delphi Prism indexed properties visible to C# when properties are not default

    - by Arcturus
    I have several Delphi Prism classes with indexed properties that I use a lot on my C# web applications (we are migrating a big Delphi Win32 system to ASP.Net). My problem is that it seems that C# can't see the indexed properties if they aren't the default properties of their classes. Maybe I'm doing something wrong, but I'm completely lost. I know that this question looks a lot like a bug report, but I need to know if someone else knows how to solve this before I report a bug. If I have a class like this: TMyClass = public class private ... method get_IndexedBool(index: Integer): boolean; method set_IndexedBool(index: Integer; value: boolean); public property IndexedBool[index: Integer]: boolean read get_IndexedBool write set_IndexedBool; default; // make IndexedBool the default property end; I can use this class in C# like this: var myObj = new TMyClass(); myObj[0] = true; However, if TMyClass is defined like this: TMyClass = public class private ... method get_IndexedBool(index: Integer): boolean; method set_IndexedBool(index: Integer; value: boolean); public property IndexedBool[index: Integer]: boolean read get_IndexedBool write set_IndexedBool; // IndexedBool is not the default property anymore end; Then the IndexedBool property becomes invisible in C#. The only way I can use it is doing this: var myObj = new TMyClass(); myObj.set_IndexedBool(0, true); I don't know if I'm missing something, but I can't see the IndexedBool property if I remove the default in the property declaration. Besides that, I'm pretty sure that it is wrong to have direct access to a private method of a class instance. Any ideas?

    Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >