Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 275/332 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• Cannot Connect Modem ( /dev/ttySL0 ) Using gnome-ppp - Dial-Up Connection

  - by nicorellius

  I'm trying to connect my Toshiba Satellite running Ubuntu 10.04 to my Eris running Android 2.1 through a Bluetooth connection and establish a dial-up connection (DUN) with the modem. I can connect my phone to my laptop, and I can detect my modem (after installing drivers), which is located at /dev/ttySL0. But when I launch gnome-ppp and enter my phone number (123 for PDA-Net) I get a dialog that says "Connecting... Sending Password" with Log and Cancel buttons. The log shows this: --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Please enter password (or empty password to stop): --> Configuration does not specify a valid login name. The PDA-Net DUN protocol is running and shows no error. Any ideas? Any help is much appreciated.

  Read the article

• VLC Ati Radeon 6870 Ubuntu 12.04 image skewed flicker

  - by Aaron

  I'm running Ubuntu 12.04 with ATI Radeon 6870 connected to my 40' Sharp TV. The video image is slightly jigged, like breaking a bit and slightly delayed. It just isn't smooth. The computer is very fast, like i7 with 12gb ram. I tried to run the same video with my mac laptop and on the tv with the same connection cable and it was running smoothly. i tried changing the video output in VLC to x11, increase caching, h264 skip loop filter to all, increase monitor refresh rate although it's already at 60 and it's an LCD tv. this is my xorg.conf : Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[3]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-DFP9" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1920x1080" EndSection Section "Monitor" Identifier "0-DFP10" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "amdcccle-Device[3]-0" Driver "fglrx" Option "Monitor-DFP9" "0-DFP9" BusID "PCI:3:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[3]-0" Device "amdcccle-Device[3]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Ubuntu connects to wireless but doesn't work!

  - by UbuntuUser990

  I just installed Ubuntu 14.04 LTS on my laptop, it connects to my wireless network and shows that it is connected, but when I try to load a webpage or do anything like download Steam for Dota 2, it doesn't work. When I try to connect my Facebook account to Ubuntu, it doesn't work. I want to be able to use Ubuntu with working internet access. What do I do?. ifconfig this shows up eth0 Link encap:Ethernet HWaddr 88:ae:1d:60:56:eb inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) When I type ping askubuntu.com this shows up ping: unknown host askubuntu.com

  Read the article

• Samba new file ownership, permissions configuration

  - by Martin Melka

  I have recently installed Samba on my server. Now I have a question about permissions and how to set it up. Currently I mount the Samba shared drive to my laptop with this line in /etc/fstab: //<host>/share /mnt/melka-server-data/ cifs username=<usrname> password=<passwd> _netdev 0 0 This works, as I can read from the files and create them (as root). The problem is when I want to create files as a regular user. I always get a Permission Denied error. These are ll outputs of the mounted folder: magicmaster@magicmaster-kubuntu:/mnt$ ll total 8 drwxr-xr-x 3 root root 4096 lis 11 14:15 ./ drwxr-xr-x 26 root root 4096 ríj 26 11:01 ../ drwxrwxrwx 8 magicmaster magicmaster 0 lis 12 22:12 melka-server-data/ and the inside: magicmaster@magicmaster-kubuntu:/mnt/melka-server-data$ ll total 4 drwxrwxrwx 8 magicmaster magicmaster 0 lis 12 22:12 ./ drwxr-xr-x 3 root root 4096 lis 11 14:15 ../ drwxrwxrwx 5 magicmaster magicmaster 0 lis 12 09:35 downloads/ drwxrwxrwx 2 magicmaster magicmaster 0 ríj 28 12:57 lost+found/ drwxrwxrwx 15 magicmaster magicmaster 0 lis 12 09:45 movies/ drwxrwxrwx 2 magicmaster magicmaster 0 lis 1 21:15 newest/ drwxrwxrwx 3 magicmaster magicmaster 0 lis 2 23:14 photos/ drwxrwxrwx 2 magicmaster magicmaster 0 ríj 30 12:44 software/ -rw-r--r-- 1 nobody nogroup 0 lis 12 22:12 zdar I called sudo chown -R magicmaster:magicmaster melka-server-data/ to try and change all the files to belong to me. Then the file zdar was created by magicmaster just by calling touch. I got the Permission Denied, but it was still created, though it belongs to nobody and I can't write into it. When I create a file as root, it still belongs to nobody, but at least I can write into it. What am I missing? I didn't notice anything in Samba config that would be related to this and I don't like the idea of having to log on as root in order to copy files.. Thanks

  Read the article

• Gigabyte u24f Touchpad (elantech) not detected

  - by user314973

  A new Ubuntu user here. I just installed Ubuntu 14.04 on my gigabyte U24F laptop. At first the touch-pad (I believe it's elantech) was working fine but one day I turned it off using fn+f10 key from the keyboard. The next day I could no longer turn it back on and it has since been undetected by the system. xinput returns Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Video Bus id=9 [slave keyboard (3)] ? Power Button id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] so there's no touch-pad detected. I'm using a USB mouse at the moment. Attempting to run synclient gives "Couldn't find synaptics properties. No synaptics driver loaded?" Things I've tried so far to no avail Reinstalling xserver-xorg-input-synaptics. Checking dconf.editor settings, touchpad is enabled. Booting into a live usb session, touchpad no longer even works in this case. (Does this mean a fresh install wouldn't even solve the problem?) Any help is greatly appreciated!

  Read the article

• Synaptics drivers are not loading on Kubuntu 13.10 on Dell Vostro 2420

  - by Alok Singh Mahor

  I freshly installed Kubuntu 13.10, 32 bit version on newly purchased Dell Vostro 2420. everything is working fine except scrolling and multitouch features through touchpad. I am able to change position of cursor using touchpad and able to tap (single click and double click) but scrolling is not working I tried to find out solution by searching on google but could not find proper solution to load synaptics drivers. i am listing some details: Laptop: Dell Vostro 2420 Linux Kernel version and distribution: 3.11.0-12-generic, Kubuntu 13.10 output of xinput list is ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=12 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ? Dell WMI hotkeys id=13 [slave keyboard (3)] Output of synclient -l is Couldn't find synaptics properties. No synaptics driver loaded? output of lshw is at http://paste.ubuntu.com/6645687/ xserver log and dmesg dont have trace of synaptics kindly tell me how to troubleshoot this problem.

  Read the article

• Microsoft Access as a Weapon of War

  - by Damon

  A while ago (probably a decade ago, actually) I saw a report on a tracking system maintained by a U.S. Army artillery control unit.  This system was capable of maintaining a bearing on various units in the field to help avoid friendly fire.  I consider the U.S. Army to be the most technologically advanced fighting force on Earth, but to my terror I saw something on the title bar of an application displayed on a laptop behind one of the soldiers they were interviewing: Tracking.mdb Oh yes.  Microsoft Office Suite had made it onto the battlefield.  My hope is that it was just running as a front-end for a more proficient database (no offense Access people), or that the soldier was tracking something else like KP duty or fantasy football scores.  But I could also see the corporate equivalent of a pointy-haired boss walking into a cube and asking someone who had piddled with Access to build a database for HR forms.  Except this pointy-haired boss would have been a general, the cube would have been a tank, and the HR forms would have been targets that, if something went amiss, would have been hit by a 500lb artillery round. Hope that solider could write a good query :)

  Read the article

• Microsoft Access as a Weapon of War

  - by Damon Armstrong

  A while ago (probably a decade ago, actually) I saw a report on a tracking system maintained by a U.S. Army artillery control unit.  This system was capable of maintaining a bearing on various units in the field to help avoid friendly fire.  I consider the U.S. Army to be the most technologically advanced fighting force on Earth, but to my terror I saw something on the title bar of an application displayed on a laptop behind one of the soldiers they were interviewing: Tracking.mdb Oh yes.  Microsoft Office Suite had made it onto the battlefield.  My hope is that it was just running as a front-end for a more proficient database (no offense Access people), or that the soldier was tracking something else like KP duty or fantasy football scores.  But I could also see the corporate equivalent of a pointy-haired boss walking into a cube and asking someone who had piddled with Access to build a database for HR forms.  Except this pointy-haired boss would have been a general, the cube would have been a tank, and the HR forms would have been targets that, if something went amiss, would have been hit by a 500lb artillery round. Hope that solider could write a good query

  Read the article

• Installing Visual Studio 2010 Service Pack 1

  - by Martin Hinshelwood

  As has become customary when the product team releases a new patch, SP or version I like to document the install. This post seams almost redundant as I had no problems, but I think that is as valuable to other thinking of installing the Service Pack as all the problems that we sometimes get. As per Brian's post I am Installing Visual Studio Team Foundation Server Service Pack 1 first and indeed as this is a single server local deployment I need to install both. If I only install one it will leave the other product broken. Figure: Hopefully this will be more uneventful It takes a little while for your system to be checked to see what components need updating. On my main computer this was pretty quick, but on the laptop it took some time. Figure: There are a lot of components to update With this update also comes an update to .NET as well as many other components. Figure: I downloaded the full 1.5GB’s, but you could do a web install It depends on how good you internet connection is to how long it would take to download, but as I am now in the US I decided not to trust the internet connection speeds. It took around 30-40 minutes to download the full thing which is a little slow. Figure: I did not need to download, but that would increase the install time So on my main computer again this was fast, but again on my netbook this took a little while. Figure: The actual install took around 30-40 minutes (2 hours on netbook) I was pretty impressed with the speed of the install, and as Team Explore is now out of the box with Visual Studio 2010 I don’t get the problem of the SP being installed before Team Explorer and having a disjointed experience Figure: As I suspected, no problems with the install Figure: Checking in Visual Studio shows that all the servicing points were successful This was an easy experience even if the SP was over 1.5GB’s to download Hopefully I will be discovering things that work better for a good while to come, as well as not seeing holes in the product that I had no encountered yet. What were your experiences of installing Visual Studio 2010 Service pack 1?

  Read the article

• "Enable Wireless" option is disabled in network settings

  - by silenTK

  I'm using Ubuntu 11.10 (dual booted with Windows 7) but I'm unable to access Internet wireless even though I can do so on Windows 7. The output for rfkill list all is given below: rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no The output for sudo lshw -C network *-network DISABLED is: description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 11:11:11:11:11:11 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:16 memory:c2500000-c2503fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: 22:22:22:22:22:22 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff Broadcom STA wireless driver is installed, activated, and currently in use. My laptop is a HP-Pavilion-g6-1004tx. My hardware switch is on. Enable Wireless option is also disabled in network settings.

  Read the article

• How to get a Toshiba L505 to boot USB or CD

  - by ShroudedCloud

  OK, have a Toshiba L505 (not sure of the extended model number) that got a virus on Windows and will no longer will boot into that, so I'm trying to revive it with Ubuntu. Problem is, when I tell it to boot into a USB image of 12.04 32- or 64-bit, 13.04 64-bit, or elementary Luna 32-bit, it gives me some screen with a copyright from 2000 for Intel, invariably spits out a "media not recognized" type of error and then says PXE-ROM exiting. Well, that's annoying. So I went in with a CD (12.04 x86_64 having tried 32-bit in the past as well). Boot menu, select, starts running. Seeing the loading screen for Ubuntu, going well... until it's not. Again, invariably, it fails. The CD drive will cease spinning at around the same time each time and then the laptop will stop doing everything altogether (at least, everything spins down and it goes quiet). As far as I can tell, it's not to do with what function is being loaded from the CD at the time (because that bit is variable). I'd love to be able to boot from USB (since it will be all but required going forward), but getting the CD to work would be wondrous too. Anyone have any ideas of where I can go from here to try to fix this? My friends and I have turned up nothing.

  Read the article

• Installing Ubuntu along with windows 7 on shrunk partition

  - by Thabo

  I am new to Ubuntu OS and ask Ubuntu community. First this is not a duplicate question. Actually this a question which is a summery of all solutions and questions were posted in this community, related to Install Ubuntu along with Windows 7. I have bought a new Hp laptop with its original windows 7.I want to install Ubuntu along with windows 7 64 bit. I ran the Ubuntu 12.4 Desktop installation CD. But Ubuntu installer doesn't show the "along with windows 7 option"only it is showing two options. I read some questions and answers posted on this community. Specially following link Ubuntu 12.04 does not see windows already install on my computer (dual installation) I tried following thinks, I ran the terminal in live CD and tried sudo dmraid -rE command and dmraid remove command .But terminals says there is no dmraid partitions. So I tried another scenario checked my partitions with g parted.There are some partitions labeled C,HP tools,Recovery and System. C is containing windows 7 Files. So I shrank the volume of C Drive. Now I have 50000Mb of unallocated disk. I tried with Gparted to create a partition on that allocated space.It says some thing that you can't create more than four primary partition.Of course all other four partitions were created on widows are actually type of primary partition. So I went back to Windows 7 and tried to create a new volume on unallocated space.But unfortunately it says,If i create a new volume it will be the type of Dynamic partition.It says we cant boot another OS from that partition. So i cancelled that step. Now i have 50000Mb unallocated space but how can i install Ubuntu on that partition without harming the existing Windows 7? Because still I have only two options: Erase and install Ubuntu. Try something else. (I can see my unallocated space by going to "something else" option.)

  Read the article

• Shutdown issue on persistent LiveUSB

  - by John K

  A) Downloaded Ubuntu to a Windows 7 temp directory from: http://www.ubuntu.com/download/ubuntu/download (Ubuntu 11.10 - Latest version / 32-bit). The output was a .iso file. B) Created a bootable USB stick using Universal USB Installer: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/. Did not select "Persistent file". Result: Tried it in a Dell Latitude D630 Dell laptop: works every time, many startups and shutdowns. C) Repeated B) but with "Persistent file" set. Works once or twice, but then, just locks on the Ubuntu splash screen. E) Downloaded LiveUSB Install from http://live.learnfree.eu/download, which created a file on Windows 7 called live-usb-install-2.3.2.exe. F) Ran the above installer with "Persistent file" to a 4GB ScanDisk (formatted) thumb drive. Result: Worked pretty good for a while. Shutdown and rebooted several times. Changed items like creating a new directories - all worked. Then: Setup an Admin account with a password and no auto login. On next reboot, it required the password and logged in correctly. Tried to shutdown via the top left icon - Shutdown menu option. Key issue: Would not shutdown, but would always go back to the login prompt. Could successfully login. Finally, shutdown (which just put me back to the login window), and hard shutdown with the power switch. Result: On reboot, just locks on the Ubuntu splash screen. Questions (note, very new to Linux): Did I shutdown wrong (I mean prior to the hard power off)? Is the persistence option very unstable, or am I doing something else completely wrong?

  Read the article

• Lots of static/crackling noises after ALSA HDA DKMS installation

  - by MartinB

  I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

  Read the article

• Ugly Boot Screen after upgrading to 12.10

  - by Sir Linuxalot

  Is there a way to change the ugly boot screen in 12.10? It seems to have rolled back to that 8-bit blocky looking thing with tiny orange dots underneath. It then breaks into process code under that, and it looks ghastly. I've read some tutorials on getting Plymouth to do some neat things, but they were for older versions of Ubuntu. I'm running a GeForce GTX 460 if that matters. Any help would be appreciated. Update: I've noticed/found a couple of things. The upgrade on my laptop didn't do this. It still uses the "normal" Ubuntu boot logo (using Plymouth, I assume). So, something is off with my desktop. And, I found and installed Super Boot Manager to see if that would help. With that, I enabled Plymouth and added a new theme, but the machine still boots with the block-ugly logo. Finally, I messed around with Grub on boot and added "nomodeset" after "quiet splash" and added it while deleting "quiet splash." None of these solutions worked. I'll keep hunting...

  Read the article

• IPv6 tunnels - any easy way to turn them on and off?

  - by Rob Hoare

  I've set up a tunnelbroker.net (Hurricane Electric) IPv6 tunnel from my laptop running 12.04. Works fine, and allows me to test the dual-stack configuration on my remote webservers etc. until native IPv6 is available on my ISP. However, there are times when I don't want the tunnel. For example if I'm accessing something that requires an IPv4 address in my own country rather than the Tunnelbroker tunnel endpoint, or if I'm away from the local IPv4 tunnel endpoint, or if I simply want to test without IPv6. Is there a simple way to disable and then re-enable the IPv6 tunnel, without rebooting? For context, here's what's in my /etc/network/interfaces (NNN replaces numbers): auto he-ipv6 iface he-ipv6 inet6 v4tunnel endpoint 216.218.NNN.NNN address 2001:470:NNN:NNN::2 netmask 64 up ip -6 route add default dev he-ipv6 down ip -6 route del default dev he-ipv6 Is there a network manager application (gui or command line) to selectively enable/disable parts of /etc/network/interfaces, or IPv6 in general? I found even by commenting out that out (and reloading networking) it's tough to get the IPv6 to go away. A "tunnel on/off" button in networking would be great, like using a VPN.

  Read the article

• Tell me why I should bother using Linux if it's all about problems getting the OS to install or work properly? [closed]

  - by Vilhjalmur Magnussin

  Why should I spend day's trying to get Ubuntu to either install and/or work properly? I'm using an Acer Timeline X laptop and if I install 10.04 the wireless doesn't work, and if I try installing 11.04 it either won't install, or if it installs it's full of bugs causing my computer to freeze all the time. So please, I'm all open ears. Someone give me one or two good reasons to continue wasting time (in hope it eventually works) before I decide to focus my time on other things like productivity (using Windows like I've been doing successfully the last 10 years). This is the second time I give Ubuntu a try, the first time was in 2010 using Ubuntu Studio and Ubuntu Desktop, and it ended with me shifting back to Windows since I had spent more time getting everything to work than actually working while trying Ubuntu. I really don't understand why it needs to be like this. Why go on trying when all I see is forums full of discussions about problems which people are having difficulties fixing. Or maybe there is just one special type of computer which works well with Linux? Would very much like to know which computer that is. SO please, if it's not to much trouble I really want to here from someone who has something good to say about going through all this trouble just to get a working environment up and running since I already have a working environment up and running called Windows. Thanks, Villi.

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• xorg-edgers PPA with llvmpipe breaks AMD APU system

  - by linux_RRT

  I've read before where this had happened to another user with the same system... I was running Ubuntu 12.04 LTS with Kernel 3.2.0.29 and decided to give xorg-edgers a try. I purged fglrx* and xorg* before beginning. I upgraded with sudo apt-get upgrade -d The system downloaded and installed 109MB worth of data to the system, including llvmpipe which I am very unfamiliar with, and Kernel 3.5.0.11. The system was then rebooted to finalize the upgrade. The system boots to a black screen and then tells me "The system is running in low-graphics mode". Did I miss a step in the install? Or do the newest open-source drivers just not work with my hardware? I realize this hardware (APU) is some of the newer development. I dropped to command via the fallback menu and attempted to boot lightdm as root, but the system hangs in 'Configuring kernel parameters' at Starting initializes zram swaping. ...and then it just sits there. The other thing that concerns me is the output at the top of the screen that says: could not write bytes: Broken pipe Does llvmpipe work for this type of system? To be clear the system is: MSI x370-206us Laptop Radeon HD 6320 AMD e450 APU 1.67ghz dual-core Any help would be much appreciated. Like I said, I'm pretty sure I followed the right order of operations for the install procedure, but I was curious if anyone with similar hardware had experienced anything similar.

  Read the article

• Partner Training for Oracle Business Intelligence Applications 4-Day Bootcamp

  - by Mike.Hallett(at)Oracle-BI&EPM

  Partners 4-Day training from 15th - 18th October 2012, at Oracle Reading (UK) The Oracle Business Intelligence Applications provide pre-built Operational BI solutions for eBusiness Suite, Peoplesoft, Siebel, JDE and SAP; offering out-of-the-box integration. This FREE for Partners 4-Day training will provide attendees with an in-depth working understanding of the architecture, the technical and the functional content of the Oracle Business Intelligence Applications, whilst also providing an understanding of their installation, configuration and extension. The course will cover the following topics: Overview of Oracle Business Intelligence Applications Oracle BI Applications Fundamentals and Features Configuring BI Applications for Oracle E-Business Suite Understanding BI Applications Architecture Fundamentals of BI Applications Security   REGISTER HERE NOW    (acceptance is subject to availability and your place will be confirmed within two weeks: for help see the Partner Registration Guide) Location: Bray Room, at Oracle Corporation UK Ltd Oracle Parkway Thames Valley Park Reading, Berkshire RG6 1RA 15th - 18th October 2012, 4-Days :  9:30 am – 5:00 pm BST Audience The seminar is aimed at BI Consultants and Implementation Consultants within Oracle's Gold and Platinum Partners. Good understanding of basic data warehousing concepts Hands on experience in Oracle Business Intelligence Enterprise Edition Hands on experience in Informatica Some understanding of  Oracle BI Applications is required (See Sales & Technical Tutorials for OBI, BI-Apps and Hyperion EPM)  Good understanding of any of the following Oracle EBS modules: General Ledger, Accounts Receivables, Accounts Payables Please note that attendees are required to bring a laptop: 4GB RAM Windows 64 bits 80GB free space in Hard drive or External Device CPU Core 2 Duo or Higher Windows 7, Windows XP, Windows 2003 NOT ALLOWED with Windows Vista An Administrator User For more information please contact [email protected].

  Read the article

• Mod a Swing Arm Lamp into an Adjustable Camera Stand

  - by Jason Fitzpatrick

  If you’re looking for a simple way to get a bird’s eye view to record your DIY projects or other table-based activities like gaming or tinkering, this simple modification to a swing-arm lamp offers a highly flexible camera mount on the cheap. IKEAHacker reader Stef needed an adjustable arm for his iPhone camera so he could record in a top-down-view for some drawing tutorials he was working on. Rather than shell out big bucks for a custom boom arm, he scrounged up a swing arm lamp with a broken shade in the as-is bin at his local IKEA. To mount the iPhone he simply attached a car mount for the iPhone to the swing arm and called it good. Hit up the link below for more pictures; even if you don’t have an IKEA nearby, swing arm lamps are cheap and easy to acquire. Forsa Camera Stand [IKEAHackers] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• solve a partition misalignment?

  - by learner

  I have a new Dell XPS laptop which had Windows 7 installed in it. It also had a default extra partition for "Dell Utility". I installed Ubuntu in it on an Extended Partition along with windows and specified the logical partitions myself (for /,/home and swap). Now when I open Disk Utility , it shows this "Partition misaligned by 512 bytes" error for the Dell Utility partition and "Partition misaligned by 1024 bytes" for the entire Extended partition where Ubuntu is installed. Deleting the extended partition and re-installing Ubuntu may solve the problem of misalignment in the extended partition. But how about the Dell Utility partition? If I re-install Windows 7 Dell Utility wouldn't be a part of the re-install. So that may not solve it either. How do I fix this? Note: The extended partition I made contains an NTFS logical partition for holding data accessible by both OSes(basically a personal data partition). EDIT: I deleted all my Ubuntu partitions and re-installed Ubuntu like before,this time making them partitions with GParted via LiveCD. Now the only problem is that there is a misalignment in the Dell Utility partition. The other misalignment got fixed. Now how do I get rid of that issue?

  Read the article

• Fresh install on SSD with Ubuntu and Windows Vista, using whole disk encryption for Ubuntu

  - by nategator

  I would like to do a fresh install on a OCZ Vertex Plus R2 SSD 60GB drive I purchased on the cheap. Since the AES-encryption looks like it may not work optimally for this drive, I would like to set up a dual-boot to Windows Vista (the only Windows copy I have for clean install purposes) and Ubuntu 12.04 with the best encryption scheme possible. My plan is to have Windows around just in case I need to use a program that won't work with Wine and Ubuntu as my daily OS with all of my information secured in case the laptop is ever stolen or sold. Although this setup will not provide a lot of space, I think I can squeeze both OSes and have enough for second-computer office tasks. So, my questions are: Which OS should I install first, Ubuntu or Vista? Any special considerations when partitioning the drive? How should I install Ubuntu to ensure full disk encryption for the Linux partition(s) and or my daily computing? Is there a significant performance upgrade with doing a solo install of Ubuntu instead of a dual boot setup? Will TRIM, for example, work correctly? Are there any significant security concerns with going the route of a dual-boot, other than the fact that any activity on Windows may be fully recoverable if the drive is stolen or sold? Thanks in advance!

  Read the article

• Serious error on first attempts to dual boot Ubuntu 14.04 with Win7

  - by beetle

  I downloaded Ubuntu 14.04 from the website which I saved to my desktop with WinRar. My trial with winrar had expired so I have now tried it with Active@Isoburner but I'm getting no further. I eventually got it burnt onto a DVD(4.7gb) and tried to boot from DVD and normally. Neither way works. It looks like its about to boot but then a message appears saying that a serious error has occurred...the disk drive for /tmp is not ready yet or not present...press I to ignore, s to skip or m for manual... At this point I'm lost and unsure what to do. My laptop Toshiba Equium A210-17I is over 5 or 6 years old. Available space on the Hard Drive is 24gb. 2gb RAM. It originally came with Windows Vista Home Premium edition but about a year ago or more a friend wiped it clean for me as I was having no end of problems with Vista. He installed Windows 7 Ultimate(which I don't have a disc for). How can I resolve this issue and get Ubuntu to boot up? Do I have to install a previous version of Ubuntu first? Any advice or help would be greatly appreciated. Kind regards. Beetle.

  Read the article

• Demantra Implementation Tip Windows and Unix or Linux

  - by user702295

  Hello!  Are you implementing using a third party or consulting resources?   Recently we have seen some cases where customers no longer have a windows installation.  After the initial install and configuration, once the instance has gone live, the windows install is either deleted or most likely no longer with the customer as the same was installed on the implementers' laptop to start with. As a result when support comes back requesting the customer to apply a patch and/or upgrade they do not have a windows installation.  This has started happening after Oracle Demantra gave them the option to configure the engine on Unix.  Workaround: It is advisable that the customer keep their Windows installation intact for further patching and/or upgrade.  It is aslo possible that the implementer had installed Demantra on his Windows box and you do not have access to it any more.  It is possible that with the web and engine on Unix, and the silent installer having downloaded all the executable for Business Modeler, to work on the User's client machine, you may no longer need the windows install. I have not tested the above 

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >