Search Results

Search found 7118 results on 285 pages for 'sam ram san'.

Page 275/285 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• How to install RAID drivers on already installed Windows 7?

  - by happysencha

  64-bit Windows 7 Ultimate 6GB RAM Intel i7 920 Intel X25-M SSD 80GB 2,5" Club 3D Radeon HD5750 GA-EX58-UD4P Motherboard I've been running fine with Windows 7 installed on the SSD. I wanted to create an mirrored Raid-1 setup for backups using two hard disks, so I ordered two Samsung HD203WI. This motherboard supports two different RAID controllers, the Intel's ICH10R and Gigabyte's SATA2 SATA controller. There are 6 SATA ports behind the ICH10R and 2 SATA ports for the Gigabyte controller. I googled around and seemed that the ICH10R is a better choice and since then I've been trying to make it work. When I activate the [RAID] mode from BIOS, the Windows 7 gives BSOD exactly as described by this guy: "Windows 7 will start to boot, it gets to the screen where there are 4 colors coming together and it blue screens and restarts no matter what I do." First thing I did: turned off the RAID and booted to Windows and tried to install the SATA RAID drivers from Gigabyte. I launch the driver installation program and it gives "This computer does not meet the minimum requirements for installing the software" error. I then tried Intel's Rapid Storage Technology drivers (which apparently is the same as the one offered at Gigabyte's site), but it resulted in exactly the same error. I then detached the new Samsung hard disks from the SATA ports, but left the [RAID] enabled in BIOS. To my surprise, it still BSOD'd, so at this point I knew it is an OS/driver issue. Also, I tried with the Gigabyte's RAID enabled (while the ICH10R RAID disabled) and it booted just fine. So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed." So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks. I mean why would I need to re-install operating system to add RAID setup?

  Read the article

• Computer randomly reboots during "intensive activity".

  - by Reznor

  My friend has been playing games on his new build for some time now. However, lately, his computer will randomly reboot out of nowhere, so far only happening in game, and presumably only to happen in game as it happens nowhere else. This can happen in game during play or even in the options. Note, it isn't a crash or blue screen. It's just a normal reboot. This started today, I believe, and has only occured in two games: Dead Space and Stalker: Shadow of Chernobyl. He has played a handful of games before these, for about a week or so, without this problem. We theorized on two possibilities: Maybe something is overheating? Maybe the power supply is inadequate? These two were quickly dismissed, as all his components were operating at normal temperatures when he got back to his desktop from the reboot, and we all know these parts don't exactly cool down quickly, especially if they get hot enough to trigger a reboot. Besides, I know at-least my motherboard reports processor overheating at start-up, and requests I press f1 to continue into boot. The PSU one was dismissed too. He has an 850w power supply on a rig that was estimated to take only 720 some watts, that's with some overcompensating to be safe. He opened up his case to make sure nothing was seated wrong or in the way. All was fine, but he did notice a sticker on his video card. It had a giant barcode on it and some numbers. Now, I'm used to seeing these stickers, they're the warranty stickers, right, and removal voids the warranty? Yeah, well, we find it odd because this sticker is slapped right over the circuits of the video card, not on a block or anything. Is this normal? Should he remove it? Right now, I am concerned with the memory. Could that be at fault? Here are his specs: Windows 7 Home Premium, 64-Bit Intel i7 950 EVGA GeForce 570 GTX 4 GB DDR3 PC10666 dual-channel Corsair RAM Corsair 850w PSU Gigabyte GA-X58A-UD3R Western Digital 1 TB WD1001FALS

  Read the article

• Why Photoshop CS5's photomerge's result immediately disappear?

  - by koiyu

  I have a bunch of JPG-files which I want to stitch together with Photoshop's Photomerge function. I choose File → Automate → Photomerge... and browse for the files. Photoshop opens the files and starts analyzing. I see the process bar filling and different phases are mentioned on the process bar. Nothing weird there. When the merging is done (and if I don't blink my eyes), I can see layers-palette is populated with the chosen files and, by quickly judging from the layer thumbnails, they're properly aligned. Sometimes the image window itself can be seen, but not always. Problem is that the layers and the image disappear in a flash. There is no error message. Everything is like prior starting the photomerge. No file has been changed. I could continue to use Photoshop normally. This is what I've tried so far: Loaded folder which has 38 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded the same files, but chose Use Files instead of Use Folder in the photomerge's window Loaded 19 JPG images, 4272 x 2848 and ˜ 5 megabytes per file Loaded 10 JPG images, ⇑ see above Loaded 5 JPG images, see above Loaded 3 JPG images, see above Scaled the images to 2256 x 1504 and ˜< 1 megabytes per file Loaded in a set of 38, 19, 10, 5, 3 Following steps are tested with these smaller files and with a set of 5 images Read Adobe's forums and reduced the amount of RAM Photoshop uses gradually from ˜ 80 % to 50 % (though I didn't understand the logic behind this) Would've reduced cache tile size to 128K, but it was set so already Disabled OpenGL Scaled the images to 800 x 533 and ˜ 100 kilobytes per file, loaded a set of 5 Read more unanswered threads around the internet In between each test I closed and reopened Photoshop. This is the first time I've even tried using photomerge. Am I doing something wrong? How can I locate what is the problem? How do I fix this? Photoshop is 64 bit Extended CS5 version. I'm on a mid-2010 quad-core (i5) iMac with up-to-date Mac OS X 10.6.6. Edit: Weird. First loading the images into one file via File → Scripts → Load Files into Stack… and then using Edit → Auto-Align Layers…, which, effectively, is the same as photomerge (even the dialog looks kind of the same), works! Even with the original JPGs without any issues. This doesn't fix photomerge, though.

  Read the article

• A Windows Update Prevented Live Discs From Working?

  - by user88311

  First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

  Read the article

• Remote Debian System Preventing Logon

  - by choobablue

  I have a dozen or so single board computers on a network running Debian (squeeze) and access them via ssh (ssh server is dropbear). To give an idea of the hardware of these computers they're 1.2 GHz x86 processors, 1GB of RAM and 4GB flash drives formatted as ext2 (I avoided ext3 to prevent the added flash write stress from journaling), there is also a swap partition on the drive. Normally the setup I'm using works great and I can access all the computers. Every once in a while one will prevent access. What happens is I try to connect via ssh (putty) and it gives me the login prompt, I enter the username and password and it responds 'Access Denied' and it will also refuse any public key in ~/.ssh/authorized_keys. The credentials are correct as they worked previously. The computer responds to pings and putty recognizes the server public key, which implies to me the system is still running. Restarting the server fixes the problem and I can log in again. (I tried a temporary fix of putting shutdown -r now in the root crontab but this doesn't seem to reliably be run once the hang happens) Once I restart however there doesn't seem to be any information in any of the system logs to indicate what happened, the logs are simply empty for that time period, as if the system had crashed. There is some custom software running on the system which appears to stop working (which is why I wanted to ssh to begin with). I'm assuming that this program is the source of the problems but I'm unsure of how it would cause it and how to debug what is happening. The most likely explanation I can think of is that there is a memory leak in the other program that then prevents dropbear from spawning a new login shell (and crontab from executing shutdown) as there is not enough free memory. But looking at memory usage of the other (working) computers there doesn't seem to be any meaningful increase in memory to indicate a leak (unless it's a very big, fast acting and rare leak). I would think that when the OS ran out of memory it would restart the system or kill processes (the Linux kernel restarts right?). The other thing I wonder about is if the fact that they are running off a flash drive could have some effect, especially the swap partition (which I think I should remove to prevent wear of the flash), but the flash drives are young (~1 month) and I don't think that wear would be a factor yet. Does anybody have an idea of what could cause these symptoms, if it could be done by a memory leak, or something else I haven't thought of. And does anybody know of a method to try to debug the problem and find out more information about what's going wrong?

  Read the article

• Internet Pings but Does Not Load

  - by t3techcom18

  From what I've been seeing and been doing my research for the past two days, many people have been having the same issues throughout the years, however, this is the first time I've encountered this issue and many of the specific workarounds or fixes have not worked for me. I've been trying to work through this for 24 hours straight now, but to no avail so many thanks to those that can help. On Monday night, got home from work; surfing the internet for half an hour, everything was fine as always. Just after half an hour, my Internet got very sluggish and then it died completely. I thought it might have been the an update I just put through in terms of Windows Update that said was a critical update for MSE, as the same thing happened a few years ago. I did a System Restore to two different dates that were in the past two weeks, nothing. Uninstalled MSE and disabled Windows Defender and the Windows Firewall: Nothing. Reset IE Options, Reset Winsock, Dumping DNS, many of the other command prompt screens to reset items: Nothing. Reset the modem: Nothing. What DID work, however, was a ping test to Yahoo. The ping test worked, saying all four packets was recieved, yet nothing else popped up. LAN and CenturyLink said everything worked on their end and that everything was connected properly, as well as the speeds working fine. CenturyLink said in their notes that they thought Port 80 was blocked. I went and put in the Firewall to allow Port 80 but it didn't make any difference whatsoever. I remembered I had a spare modem laying around and I switched them up, both modem and the cords - nothing. I then hooked it up to my netbook to see if that would work, as it usually does - connection didn't work there either. Like I said, it's been about 24 hours now and this is increasingly frustrating, as I've tried all solutions (While browsing through 10 search results pages on my phone) suggested and still nothing. Any suggestions and tricks would be greatly appreciated! Here's my specs: Windows 7 32-bit Home Premium Intel Core 2 Duo 3.14 Ghz 4 GB Kingston DDR2 RAM eVGA nForce 750i SLI eVGA GeForce GTX 560 Ti FPB ISP: CenturyLink No router Modem: CenturyLink 660 Series Hardwired connection PLEASE NOTE: This is the only computer I have (Like I said, the netbook solution didn't work), so downloading programs and such is not an option til I get to other computers somewhere else, like right now. Unless someone knows of a way of copying/pasting a file in Windows and then transferring said info to an Android smartphone, this is gunna take a while haha. Patience is requested.

  Read the article

• What server setup for a small web development company? [closed]

  - by Giordano

  I co-own a company with a friend of mine and we have decided to buy a new server to support our business (our current server is an Asus EEE Box, working great but too limited :) ). I should mention that we are web developers but occasionally we do small-office sys admin. Thus, 99% of time we work on GNU/Linux (mainly Ubuntu) but from time to time we need to setup a Windows environment to assist some customers (e.g. setup a temporary SQL Server 2008). Our requirements: Low budget: we don't want the cheapest solution out there but we can't afford to spend too much. Budget could be ~1000-1500€ (before VAT) Robustness: we would like to setup a RAID array and maybe have an external disk where we can store backups Virtualization: we need to be able to setup few servers for development. The scenario is something like this (~8 appliances running in parallel): Redmine + GIT server Bacula server FTP server 3-4 virtual appliances that could be set up on demand to test our applications or support a customer. The appliances could be: LAMP, Tomcat+PostgreSQL, SQL Server Support: if something breaks down it shouldn't be too difficult to find a replacement. Now, given the main requirements, there are some doubts we need to clarify: Do you suggest to buy a prepackaged solution (for example a customized Dell PowerEdge T110 or T310) or to assemble the server by ourselves (buy the separate components)? What RAID configuration do you suggest? I was thinking of RAID1 (probably cheaper) or RAID5. should we buy a hardware RAID controller or is it ok to use a software RAID (mdadm)? In case, which controller do you suggest? What processor do you suggest (Intel Xeon, i3, i5, i7, AMD)? How much RAM? (I was thinking at least 8GB, ~1GB per appliance) What virtualization software do you recommend? VMWare seems to be the best choice, but what about XEN or KVM? We don't want to buy licenses at the moment so we would like to consider only free options. What OS do you recommend? We know Ubuntu, Debian, Gentoo very well (we would like to use Ubuntu Server), however it seems a lot of people goes for CentOS. Thanks in advance if you can help us with this! It's our first "serious" server so many doubts popped up :) Please feel free to add further recommendations if you have some to share ;) Have a nice day

  Read the article

• Looking For iPhone 4S Alternatives? Here Are 3 Smartphones You Should Consider

  - by Gopinath

  If you going to buy iPhone 4S on a two year contract in USA, Europe or Australia you may not find it expensive. But if you are planning to buy it in any other parts of the world, you will definitely feel the heat of ridiculous iPhone 4S price. In India iPhone 4S costs approximately costs $1000 which is 30% more than the price tag of an unlocked iPhone sold in USA. Personally I love iPhones as there is no match for the user experience provided by Apple as well as the wide range of really meaning applications available for iPhone. But it breaks heart to spend $1000 for a phone and I’m forced to look at alternates available in the market. Here are the four iPhone 4S alternates available in almost all the countries where we can buy iPhone 4S Google Galaxy Nexus The Galaxy Nexus is Google’s own Android smartphone manufactured by Samsung and sold under the brand name of Google Nexus. Galaxy Nexus is the pure Android phone available in the market without any bloat software or custom user interfaces like other Androids available in the market. Galaxy Nexus is also the first Android phone to be shipped with the latest version of Android OS, Ice Cream Sandwich. This phone is the benchmark for the rest of Android phones that are going to enter the market soon. In the words of Google this smartphone is called as “Galaxy Nexus: Simple. Beautiful. Beyond Smart.”.  BGR review summarizes the phone as This is almost comical at this point, but the Samsung Galaxy Nexus is my favourite Android device in the world. Easily replacing the HTC Rezound, the Motorola DROID RAZR, and Samsung Galaxy S II, the Galaxy Nexus champions in a brand new version of Android that pushes itself further than almost any other mobile OS in the industry. Samsung Galaxy S II The one single company that is able to sell more smartphones than Apple is Samsung. Samsung recently displaced Apple from the top smartphone seller spot and occupied it with loads of pride. Samsung’s Galaxy S II fits as one the best alternatives to Apple’s iPhone 4S with it’s beautiful design and remarkable performance. Engadget summarizes Samsung Galaxy S2 review as It’s the best Android smartphone yet, but more importantly, it might well be the best smartphone, period. Of course, a 4.3-inch screen size won’t suit everyone, no matter how stupendously thin the device that carries it may be, and we also can’t say for sure that the Galaxy S II would justify a long-term iOS user foresaking his investment into one ecosystem and making the leap to another. Nonetheless, if you’re asking us what smartphone to buy today, unconstrained by such externalities, the Galaxy S II would be the clear choice. Sometimes it’s just as simple as that. Nokia Lumia 800 Here comes unexpected Windows Phone in to the boxing ring. May be they are not as great as Androids available in the market today, but they are picking up very quickly. Especially the Nokia Lumia 800 seems to be first ever Windows Phone 7 aimed at competing serious with Androids and iPhones available in the market. There are reports that Nokia Lumia 800 is outselling all Androids in UK and few high profile tech blogs are calling it as the king of Windows Phone. Considering this phone while evaluating the alternative of iPhone 4S will not disappoint you. We assure. Droid RAZR Remember the Motorola Driod that swept entire Android market share couple of years ago? The first two version of Motorola Droids were the best in the market and they out performed almost every other Android phone those days. The invasion of Samsung Androids, Motorola lost it charm. With the recent release of Droid RAZR, Motorola seems to be in the right direction to reclaiming the prestige. Droid RAZR is the thinnest smartphone available in the market and it’s beauty is not just skin deep. Here is a review of the phone from Engadget blog the RAZR’s beauty is not only skin deep. The LTE radio, 1.2GHz dual-core processor and 1GB of RAM make sure this sleek number is ready to run with the big boys. It kept pace with, and in some cases clearly outclassed its high-end competition. Despite its deficiencies in the display department and underwhelming battery life, the RAZR looks to be a perfectly viable alternative when considering the similarly-pricey Rezound and Galaxy Nexus Further Reading So we have seen the four alternates of iPhone 4S available in the market and I personally love to buy a Samsung smartphone if I’m don’t have money to afford an iPhone 4S. If you are interested in deep diving into the alternates, here few links that help you do more research Apple iPhone 4S vs. Samsung Galaxy Nexus vs. Motorola Droid RAZR: How Their Specs Compare by Huffington Post Nokia Lumia 800 vs. iPhone 4S vs. Nexus Galaxy: Spec Smackdown by PC World Browser Speed Test: Nokia Lumia 800 vs. iPhone 4S vs. Samsung Galaxy S II – by Gizmodo iPhone 4S vs Samsung Galaxy S II by pocket lint Apple iPhone 4S vs. Samsung Galaxy S II by techie buzz This article titled,Looking For iPhone 4S Alternatives? Here Are 3 Smartphones You Should Consider, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• OBIEE 11.1.1 - OBIEE 11g Full Sample App on VMware Player 4

  - by user809526

  The Full Sample App is designed to run on Virtual Box. Let's describe how to run it on VMware Player 4. Open Virtualization Format Tool http://communities.vmware.com/community/vmtn/server/vsphere/automationtools/ovf VMware Player Documentation https://www.vmware.com/support/pubs/player_pubs.html Full Sample App Deployment Guide sampleapp107-vbimage-deployguide-453583.pdf INSTALL VMplayer 4.0.0 as root LINUX # sh VMware-Player-4.0.0-471780.x86_64.bundle (A new VM is not needed and can be deleted later after that installation is completed. "I will install OS later" - blank hard disk Guest: linux, Red Hat Enterprise Linux 5-64bits => rename to RHEL target: eg /a/root/vmware/ Max disk size: 5 GB (will be deleted) Disk: Single file Dummy RHEL.vmk, RHEL.vmdk is generated. "Delete VM from Disk" in VM Player.) Copy Full Sample App files to target /a/root/vmware/ WARNING: Select a target eg /a/root/vmware/ with lots of free space, 95 GB. Check checksums (md5sum). Please do it! ff85c7eacf7fb8c382e98da875e879e1  Sampleapp_v107_GA-disk1.vmdk 973258cb3c7d64ab03ae853278cf2233  Sampleapp_v107_GA-disk2.vmdk e576be16e36d810479736bfb15d050f5  Sampleapp_v107_GA-disk3.vmdk 3455df77279e53e07d5fee6712f1597d  Sampleapp_v107_GA-disk4.vmdk OVF FILE   Sampleapp_v107_GA.ovf CONVERSION $ cd /a/root/vmware/ LINUX $ /usr/bin/ovftool -tt=ovf --compress=1 -dm=monolithicSparse Sampleapp_v107_GA.ovf .  [dot] Opening OVF source: Sampleapp_v107_GA.ovf Warning: No manifest file Opening OVF target: . Writing OVF package: Sampleapp_v107_GA/Sampleapp_v107_GA.ovf Disk Transfer Completed                   Completed successfully WINDOWS CYGWIN $ /cygdrive/c/VMwarePlayer/OVFTool/ovftool.exe -tt=ovf --compress=1 -dm=monolithicSparse Sampleapp_v107_GA.ovf .  [dot] Opening OVF source: Sampleapp_v107_GA.ovf Warning: No manifest file Opening OVF target: . Writing OVF package: Sampleapp_v107_GA\Sampleapp_v107_GA.ovf Disk Transfer Completed Completed successfully /a/root/vmware$ du -sk 49095328    .   [50 GB already occupied] IMPORT - First start of VM Player 4: /usr/bin/vmplayer "Open a Virtual Machine" Browse to /a/root/vmware/Sampleapp_v107_GA/Sampleapp_v107_GA.ovf [the new generated .ovf] "Import Virtual Machine" dialog Name: Sampleapp_v107_GA Location: /a/root/vmware/Sampleapp_v107_GA/storage [was /home/tdubois/vmware/Sampleapp_v107_GA] "Import" "The import failed because /a/root/vmware/Sampleapp_v107_GA/Sampleapp_v107_GA.ovf did not pass OVF specification conformance or virtual hardware compliance checks. Click Retry to relax OVF specification..." "Retry" ; Long import /a/root/vmware/Sampleapp_v107_GA/storage/Sampleapp_v107_GA.vmx and new .vmdk files are created. /a/root/vmware$ du -sk 95551384    .   [95 GB occupied] Full Sample App GUEST SETUP "Edit VM settings" min 3GB, 2+ processors, network bridged. For OBIEE + Essbase testing use 8 GB RAM hardware. At first time lauch of Full Sample App, leave OEL booting for several minutes undisturbed. Problem with X display server may occur [/usr/bin/Xorg ; man Xorg]. "Failed to start the X server.... Would you like to view the X server output to diagnose the problem?" "No" [tab key] "Would you like to try to configure the X server? Note that you will need the root password for this." "Yes" [oracle] X Display Settings 800x600 saved in /etc/X11/xorg.conf "Trying to restart the X server" Login as root/oracle in guest OEL. In guest OEL, Virtual Machine > Install VMware Tools... Extract archive VMwareTools-8.8.0-471268.tar.gz all files in writable local directory eg /root In Terminal run Perl script # cd /root/vmware-tools-distrib ; ./vmware-install.pl [keep all default answers] Set keyboard layout System > Preferences > Keyboard > Layouts Restart X server eg System > Log Out root... , relogin Modify X resolution System > Preferences > Screen Resolution Full Sample App OEL login: oracle/oracle ; root/oracle [default US keyboard layout] Credentials are described in the 'sampleapp107-vbimage-deployguide-453583.pdf' The large files in /a/root/vmware/ /a/root/vmware/Sampleapp_v107_GA/ may be removed. FAILURE REMARK: Adding the 4 original Sampleapp_v107_GA-disks[1234].vmdk to VM Player does NOT work as described below. "Edit VM settings" "Remove" "Hard Disk" "Edit VM settings" "Add" "Hard Disk" "Next" "Use an existing virtual disk" "Browse" "Finish" "Keep existing format" "Ok" for each 4 disks settings one by one. Start VM Player 4. "You do not have write access to a partition" Allow all Sampleapp_v107 OEL linux launches. OEL stalls silently after 'Checking filesystems'.

  Read the article

• Issue 15: Oracle PartnerNetwork Exchange @ Oracle OpenWorld

  - by rituchhibber

       ORACLE FOCUS Oracle PartnerNetwork Exchange@ ORACLE OpenWorld Sylvie MichouSenior DirectorPartner Marketing & Communications and Strategic Programs RESOURCES -- Oracle OpenWorld 2012 Oracle PartnerNetwork Exchange @ OpenWorld Oracle PartnerNetwork Exchange @ OpenWorld Registration Oracle PartnerNetwork Exchange SpecializationTest Fest Oracle OpenWorld Schedule Builder Oracle OpenWorld Promotional Toolkit for Partners Oracle Partner Events Oracle Partner Webcasts Oracle EMEA Partner News SUBSCRIBE FEEDBACK PREVIOUS ISSUES If you are attending our forthcoming Oracle OpenWorld 2012 conference in San Francisco from 30 September to 4 October, you will discover a new dedicated programme of keynotes and sessions tailored especially for you, our valued partners. Oracle PartnerNetwork Exchange @ OpenWorld has been created to enhance the opportunities for you to learn from and network with Oracle executives and experts. The programme also provides more informal opportunities than ever throughout the week to meet up with the people who are most important to your business: customers, prospects, colleagues and the Oracle EMEA Alliances & Channels management team. Oracle remains fully focused on building the industry's most admired partner ecosystem—which today spans over 25,000 partners. This new OPN Exchange programme offers an exciting change of pace for partners throughout the conference. Now it will be possible to enjoy a fully-integrated, partner-dedicated session schedule throughout the week, as well as key social events such as the Sunday night Welcome Reception, networking lunches from Monday to Thursday at the Howard Street Tent, and a fantastic closing event on the last Thursday afternoon. In addition to the regular Oracle OpenWorld conference schedule, if you have registered for the Oracle PartnerNetwork Exchange @ OpenWorld programme, you will be invited to attend a much anticipated global partner keynote presentation, plus more than 40 conference sessions aimed squarely at what's most important to you, as partners. Prominent topics for discussion will include: Oracle technologies and roadmaps and how they fit with partners' business plans; business development; regional distinctions in business practices; and much more. Each session will provide plenty of food for thought ahead of the numerous networking opportunities throughout the week, encouraging the knowledge exchange with Oracle executives, customers, prospects, and colleagues that will make this conference of even greater value for you. At Oracle we always work closely with our partners to deliver solution offerings that improve business value, simplify the IT experience and drive innovation and efficiencies for joint customers. The most important element of our new OPN Exchange is content that helps you get more from technology investments, more from your peer-to-peer connections, and more from your interactions with customers. To this end we've created some partner-specific tools which can be used by OPN members ahead of the conference itself. Crucially, a comprehensive Content Catalog already lists and organises details of every OPN Exchange session, speaker, exhibitor, demonstration and related materials. This Content Catalog can be used by all our partners to identify interesting content that you can add to your own personalised Oracle OpenWorld Schedule Builder, allowing more effective planning and pre-enrolment for vital sessions. There are numerous highlights that you will definitely want to include in those personal schedules. On Sunday morning, 30 September we will start the week with partner dedicated OPN Exchange sessions, following our Global Partner Keynote at 13:00 with Judson Althoff, SVP, Worldwide Alliances & Channels and Embedded Sales and senior executives, giving insight into Oracle's partner vision, strategy, and resources—all designed to help build and strengthen market opportunities for you. This will be followed by a number of OPN Exchange general sessions, the Oracle OpenWorld Opening Keynote with Larry Ellison, CEO, Oracle and concluded with the OPN Exchange AfterDark Welcome Reception, starting at 19:30 at the Metreon. From Monday 1 to Thursday 4 October, you can attend the OPN Exchange sessions that are most relevant to your business today and over the coming year. Oracle's top product and sales leaders will be on hand to discuss Oracle's strategic direction in 40+ targeted and in-depth sessions focussing on critical success factors to develop your business. Oracle's dedication to innovation, specialization, enablement and engineering provides Oracle partners with a huge opportunity to create new services and solutions, differentiate themselves and deliver extreme value to joint customers across the globe. Oracle will even be helping over 1000 partners to earn OPN Specialization certification during the Oracle OpenWorld OPN Exchange Test Fest, which will be providing all the study materials and exams required to drive Specialization for free at the conference. You simply need to check the list of current certification tracks available, and make sure you pre-register to reserve a seat in one of the ten sessions being offered free to OPN Exchange registered attendees. And finally, let's not forget those all-important networking opportunities, which can so often provide partners with valuable long-term alliances as well as exciting new business leads. The Oracle PartnerNetwork Lounge, located at Moscone South, exhibition hall, room 100 is the place where partners can meet formally or informally with colleagues, customers, prospects, and other industry professionals. OPN Specialized partners with OPN Exchange passes can also visit the OPN Video Blogging room to record and share ideas, and at the OPN Information Station you will find consultants available to answer your questions. "For the first time ever we will have a full partner conference within OpenWorld. OPN Exchange @ OpenWorld will kick-off on the first Sunday and run the entire week. We'll have over 40 sessions throughout that time and partners will hear from our top development executives, with special sessions dedicated to partnering throughout. It's going to be a phenomenal event, and we look forward to seeing our partners there." Judson Althoff, SVP, Oracle Worldwide Alliances & Channels and Embedded Sales So if you haven't done so already, please register for Oracle PartnerNetwork Exchange @ OpenWorld today or add OPN Exchange to your existing registration for just $100 through My Account. And if you have any further questions regarding partner activities at Oracle OpenWorld, please don't hesitate to contact the Oracle PartnerNetwork team at [email protected] will be on hand to share the very latest information about: Oracle's SPARC Superclusters: the latest Engineered Systems from Oracle, delivering radically improved performance, faster deployment and greatly reduced operational costs for mixed database and enterprise application consolidation Oracle's SPARC T4 servers: with the newly developed T4 processor and Oracle Solaris providing up to five times the single threaded performance and better overall system throughput for expanded application versatility Oracle Database Appliance: a new way to take advantage of the world's most popular database, Oracle Database 11g, in a single, easy-to-deploy and manage system. It's a complete package engineered to deliver simple, reliable and affordable database services to small and medium size businesses and departmental systems. All hardware and software components are supported together and offer customers unique pay-as-you-grow software licensing to quickly scale from two to 24 processor cores without incurring the costs and downtime usually associated with hardware upgrades Oracle Exalogic: the world's only integrated cloud machine, featuring server hardware and middleware software engineered together for maximum performance with minimum set-up and operational cost Oracle Exadata Database Machine: the only database machine that provides extreme performance for both data warehousing and online transaction processing (OLTP) applications, making it the ideal platform for consolidating onto grids or private clouds. It is a complete package of servers, storage, networking and software that is massively scalable, secure and redundant Oracle Sun ZFS Storage Appliances: providing enterprise-class NAS performance, price-performance, manageability and TCO by combining third-generation software with high-performance controllers, flash-based caches and disks Oracle Pillar Axiom Quality-of-Service: confidently consolidate storage for multiple applications into a single datacentre storage solution Oracle Solaris 11: delivering secure enterprise cloud deployments with the ability to run hundreds of virtual application with no overhead and co-engineered with other Oracle software products to provide the highest levels of security, manageability and performance Oracle Enterprise Manager 12c: Oracle's integrated enterprise IT management product, providing the industry's only complete, integrated and business-driven enterprise cloud management solution Oracle VM 3.0: the latest release of Oracle's server virtualisation and management solution, helping to move datacentres beyond server consolidation to improve application deployment and management. Register today and ensure your place at the Extreme Performance Tour! Extreme Performance Tour events are free to attend, but places are limited. To make sure that you don't miss out, please visit Oracle's Extreme Performance Tour website, select the city that you'd be interest in attending an event in, and then click on the 'Register Now' button for that city to secure your interest. Each individual city page also contains more in-depth information about your local event, including logistics, agenda and maybe even a preview of VIP guest speakers. -- Oracle OpenWorld 2010 Whether you attended Oracle OpenWorld 2009 or not, don't forget to save the date now for Oracle OpenWorld 2010. The event will be held a little earlier next year, from 19th-23rd September, so please don't miss out. With thousands of sessions and hundreds of exhibits and demos already lined up, there's no better place to learn how to optimise your existing systems, get an inside line on upcoming technology breakthroughs, and meet with your partner peers, Oracle strategists and even the developers responsible for the products and services that help you get better results for your end customers. Register Now for Oracle OpenWorld 2010! Perhaps you are interested in learning more about Oracle OpenWorld 2010, but don't wish to register at this time? Great! Please just enter your contact information here and we will contact you at a later date. How to Exhibit at Oracle OpenWorld 2010 Sponsorship Opportunities at Oracle OpenWorld 2010 Advertising Opportunities at Oracle OpenWorld 2010 -- Back to the welcome page

  Read the article

• SQL SERVER – Database Dynamic Caching by Automatic SQL Server Performance Acceleration

  - by pinaldave

  My second look at SafePeak’s new version (2.1) revealed to me few additional interesting features. For those of you who hadn’t read my previous reviews SafePeak and not familiar with it, here is a quick brief: SafePeak is in business of accelerating performance of SQL Server applications, as well as their scalability, without making code changes to the applications or to the databases. SafePeak performs database dynamic caching, by caching in memory result sets of queries and stored procedures while keeping all those cache correct and up to date. Cached queries are retrieved from the SafePeak RAM in microsecond speed and not send to the SQL Server. The application gets much faster results (100-500 micro seconds), the load on the SQL Server is reduced (less CPU and IO) and the application or the infrastructure gets better scalability. SafePeak solution is hosted either within your cloud servers, hosted servers or your enterprise servers, as part of the application architecture. Connection of the application is done via change of connection strings or adding reroute line in the c:\windows\system32\drivers\etc\hosts file on all application servers. For those who would like to learn more on SafePeak architecture and how it works, I suggest to read this vendor’s webpage: SafePeak Architecture. More interesting new features in SafePeak 2.1 In my previous review of SafePeak new I covered the first 4 things I noticed in the new SafePeak (check out my article “SQLAuthority News – SafePeak Releases a Major Update: SafePeak version 2.1 for SQL Server Performance Acceleration”): Cache setup and fine-tuning – a critical part for getting good caching results Database templates Choosing which database to cache Monitoring and analysis options by SafePeak Since then I had a chance to play with SafePeak some more and here is what I found. 5. Analysis of SQL Performance (present and history): In SafePeak v.2.1 the tools for understanding of performance became more comprehensive. Every 15 minutes SafePeak creates and updates various performance statistics. Each query (or a procedure execute) that arrives to SafePeak gets a SQL pattern, and after it is used again there are statistics for such pattern. An important part of this product is that it understands the dependencies of every pattern (list of tables, views, user defined functions and procs). From this understanding SafePeak creates important analysis information on performance of every object: response time from the database, response time from SafePeak cache, average response time, percent of traffic and break down of behavior. One of the interesting things this behavior column shows is how often the object is actually pdated. The break down analysis allows knowing the above information for: queries and procedures, tables, views, databases and even instances level. The data is show now on all arriving queries, both read queries (that can be cached), but also any types of updates like DMLs, DDLs, DCLs, and even session settings queries. The stats are being updated every 15 minutes and SafePeak dashboard allows going back in time and investigating what happened within any time frame. 6. Logon trigger, for making sure nothing corrupts SafePeak cache data If you have an application with many parts, many servers many possible locations that can actually update the database, or the SQL Server is accessible to many DBAs or software engineers, each can access some database directly and do some changes without going thru SafePeak – this can create a potential corruption of the data stored in SafePeak cache. To make sure SafePeak cache is correct it needs to get all updates to arrive to SafePeak, and if a DBA will access the database directly and do some changes, for example, then SafePeak will simply not know about it and will not clean SafePeak cache. In the new version, SafePeak brought a new feature called “Logon Trigger” to solve the above challenge. By special click of a button SafePeak can deploy a special server logon trigger (with a CLR object) on your SQL Server that actually monitors all connections and informs SafePeak on any connection that is coming not from SafePeak. In SafePeak dashboard there is an interface that allows to control which logins can be ignored based on login names and IPs, while the rest will invoke cache cleanup of SafePeak and actually locks SafePeak cache until this connection will not be closed. Important to note, that this does not interrupt any logins, only informs SafePeak on such connection. On the Dashboard screen in SafePeak you will be able to see those connections and then decide what to do with them. Configuration of this feature in SafePeak dashboard can be done here: Settings -> SQL instances management -> click on instance -> Logon Trigger tab. Other features: 7. User management ability to grant permissions to someone without changing its configuration and only use SafePeak as performance analysis tool. 8. Better reports for analysis of performance using 15 minute resolution charts. 9. Caching of client cursors 10. Support for IPv6 Summary SafePeak is a great SQL Server performance acceleration solution for users who want immediate results for sites with performance, scalability and peak spikes challenges. Especially if your apps are packaged or 3rd party, since no code changes are done. SafePeak can significantly increase response times, by reducing network roundtrip to the database, decreasing CPU resource usage, eliminating I/O and storage access. SafePeak team provides a free fully functional trial www.safepeak.com/download and actually provides a one-on-one assistance during such trial. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

  Read the article

• Linux-Containers — Part 1: Overview

  - by Lenz Grimmer

  "Containers" by Jean-Pierre Martineau (CC BY-NC-SA 2.0). Linux Containers (LXC) provide a means to isolate individual services or applications as well as of a complete Linux operating system from other services running on the same host. To accomplish this, each container gets its own directory structure, network devices, IP addresses and process table. The processes running in other containers or the host system are not visible from inside a container. Additionally, Linux Containers allow for fine granular control of resources like RAM, CPU or disk I/O. Generally speaking, Linux Containers use a completely different approach than "classicial" virtualization technologies like KVM or Xen (on which Oracle VM Server for x86 is based on). An application running inside a container will be executed directly on the operating system kernel of the host system, shielded from all other running processes in a sandbox-like environment. This allows a very direct and fair distribution of CPU and I/O-resources. Linux containers can offer the best possible performance and several possibilities for managing and sharing the resources available. Similar to Containers (or Zones) on Oracle Solaris or FreeBSD jails, the same kernel version runs on the host as well as in the containers; it is not possible to run different Linux kernel versions or other operating systems like Microsoft Windows or Oracle Solaris for x86 inside a container. However, it is possible to run different Linux distribution versions (e.g. Fedora Linux in a container on top of an Oracle Linux host), provided it supports the version of the Linux kernel that runs on the host. This approach has one caveat, though - if any of the containers causes a kernel crash, it will bring down all other containers (and the host system) as well. For example, Oracle's Unbreakable Enterprise Kernel Release 2 (2.6.39) is supported for both Oracle Linux 5 and 6. This makes it possible to run Oracle Linux 5 and 6 container instances on top of an Oracle Linux 6 system. Since Linux Containers are fully implemented on the OS level (the Linux kernel), they can be easily combined with other virtualization technologies. It's certainly possible to set up Linux containers within a virtualized Linux instance that runs inside Oracle VM Server for Oracle VM Virtualbox. Some use cases for Linux Containers include: Consolidation of multiple separate Linux systems on one server: instances of Linux systems that are not performance-critical or only see sporadic use (e.g. a fax or print server or intranet services) do not necessarily need a dedicated server for their operations. These can easily be consolidated to run inside containers on a single server, to preserve energy and rack space. Running multiple instances of an application in parallel, e.g. for different users or customers. Each user receives his "own" application instance, with a defined level of service/performance. This prevents that one user's application could hog the entire system and ensures, that each user only has access to his own data set. It also helps to save main memory — if multiple instances of a same process are running, the Linux kernel can share memory pages that are identical and unchanged across all application instances. This also applies to shared libraries that applications may use, they are generally held in memory once and mapped to multiple processes. Quickly creating sandbox environments for development and testing purposes: containers that have been created and configured once can be archived as templates and can be duplicated (cloned) instantly on demand. After finishing the activity, the clone can safely be discarded. This allows to provide repeatable software builds and test environments, because the system will always be reset to its initial state for each run. Linux Containers also boot significantly faster than "classic" virtual machines, which can save a lot of time when running frequent build or test runs on applications. Safe execution of an individual application: if an application running inside a container has been compromised because of a security vulnerability, the host system and other containers remain unaffected. The potential damage can be minimized, analyzed and resolved directly from the host system. Note: Linux Containers on Oracle Linux 6 with the Unbreakable Enterprise Kernel Release 2 (2.6.39) are still marked as Technology Preview - their use is only recommended for testing and evaluation purposes. The Open-Source project "Linux Containers" (LXC) is driving the development of the technology behind this, which is based on the "Control Groups" (CGroups) and "Name Spaces" functionality of the Linux kernel. Oracle is actively involved in the Linux Containers development and contributes patches to the upstream LXC code base. Control Groups provide means to manage and monitor the allocation of resources for individual processes or process groups. Among other things, you can restrict the maximum amount of memory, CPU cycles as well as the disk and network throughput (in MB/s or IOP/s) that are available for an application. Name Spaces help to isolate process groups from each other, e.g. the visibility of other running processes or the exclusive access to a network device. It's also possible to restrict a process group's access and visibility of the entire file system hierarchy (similar to a classic "chroot" environment). CGroups and Name Spaces provide the foundation on which Linux containers are based on, but they can actually be used independently as well. A more detailed description of how Linux Containers can be created and managed on Oracle Linux will be explained in the second part of this article. Additional links related to Linux Containers: OTN Article: The Role of Oracle Solaris Zones and Linux Containers in a Virtualization Strategy Linux Containers on Wikipedia - Lenz Grimmer Follow me on: Personal Blog | Facebook | Twitter | Linux Blog |

  Read the article

• Top tweets SOA Partner Community – October 2013

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity Ronald Luttikhuizen ?My latest upload: SOA Made Simple | Introduction to SOA on @slideshare http://www.slideshare.net/rluttikhuizen/soa-made-simple-introduction-to-soa … via @SlideShare OTNArchBeat ?ArchBeat Link-o-Rama for October 4, 2013 #cloud #linux #oaam #soa http://pub.vitrue.com/y4SK Lucas Jellema ?My blog article shows news on the new SOA Suite 12c release - as it was publicly available during #oow13 see: http://technology.amis.nl/2013/09/27/oow13-soa-suite-12c/ … Yogesh Sontakke ?Introducing OER's new Express Workflows - Simplified Lifecycle Management. Blog post: http://bit.ly/16JKHCf @soacommunity #soagovernance SrinivasPadmanabhuni ?"@OTNArchBeat: SOA and User Interfaces - by @soacommunity @HajoNormann @gschmutz @t_winterberg et al #industrialsoa http://pub.vitrue.com/KmOp " SOA Community ?SOA and User-Interfaces http://servicetechmag.com/I76/0913-2 article published part of #industrialSOA at Service Technology Magazine #soacommunity Estafet Limited ?@Estafet win @UKOUG Middleware Partner of the Year 2013 Yogesh Sontakke ?RT @VikasAatOracle: #Oracle #B2B - written by experts #soa #soacommunity #oraclesoa - time to get a copy ! @SOAScott Danilo Schmiedel ?Thanks a lot to Juergen @soacommunity for the super interesting and well-organized Partner Advisory Council yesterday! Such a Great Value! OTNArchBeat ?Case management supporting re-landscaping application portfolios | @leonsmiers http://pub.vitrue.com/MC5j Samantha Searle ?Apply for the #GartnerBPM 2014 Excellence Awards - find out how via this link http://ow.ly/ptaNQ #Gartner #bpm #process #entarch #cio OTNArchBeat ?SOA and User Interfaces - by @soacommunity @hajonormann @gschmutz @t_winterberg et al #industrialsoa http://pub.vitrue.com/KmOp Dain Hansen ?Hybrid #cloud is on the rise, but is the IT department's culture standing in the way? http://add.vc/eJN #CloudIntegration #OracleSOA OTNArchBeat #SOASuite 11g ps6 - Download your log files directly from the Enterprise Manager | @whitehorsenl http://pub.vitrue.com/KrJ2 Whitehorses ?Whiteblog: SOA Suite 11g ps6 - Download your log files directly from the Enterprise Manager (http://goo.gl/2Gqiax ) Rajesh Raheja ?Cloud integration session recap #oow13 http://blog.raastech.com/2013/09/recap-of-real-world-cloud-integration.html?m=1 … Vikas Anand ?@Ahmed_Aboulnaga thanks for the excellent summary and kind words. #oow13 #cloud #oraclesoa http://blog.raastech.com/2013/09/recap-of-real-world-cloud-integration.html?m=1 … Luis Augusto Weir ?REST is also SOA. Check it out http://www.soa4u.co.uk/2013/09/restful-is-also-soa.html?m=1 … #soacommunity Graham ?“@OracleBPM & @soacommunity: 5 Ways to Modernize Applications with BPM #AppAdvantage" #oracleday http://bit.ly/15yC6e3 SOA Community ?#ACED director asked me for BPM references in FSI - ever visited my #SOACommunity workspace? https://beehiveonline.oracle.com/teamcollab/overview/SOA_Community_Workspace … #soacommunity #bpm OracleBlogs ?SOA Community Newsletter September 2013 http://ow.ly/2Aj6oK OTNArchBeat ?OOW13: First glimpses of the new #SOASuite12c | @LucasJellema http://pub.vitrue.com/2YgX sbernhardt ?Just published new blog entry on OOW 2013 wrap up. http://thecattlecrew.wordpress.com/2013/09/30/oracle-open-world-2013-wrap-up/ … #oow13 @OC_WIRE @soacommunity Emiel Paasschens ?Home with family after an overwhelming #OOW week in San Francisco with lot of info & meetings. Special thanx to @OracleBelux & @soacommunity Robert van Mölken ?Had a awesome week at #OOW13 in SF. Highlights were the @soacommunity Wine tour, @OracleBelux meet-ups and @OracleSOA CAB. Thanks to all :) SOA Community ?The place Oracle Fusion middleware comes from - Oracle 200 - TKs office - next Oracle 100 - SOA & BPM #soacommunity pic.twitter.com/qibFOQVbRo Oracle BPM ?5 Ways to Modernize Applications with BPM #AppAdvantage http://pub.vitrue.com/l2dn Simon Haslam ?Ha ha - how did we miss that! RT @lucasjellema: Post conference announcement of a new middleware appliance? #oow13 pic.twitter.com/3NvcjPfjXb OTNArchBeat ?The OTNArchBeat Daily is out! http://paper.li/OTNArchBeat/1329828521 … ? Top stories today via @lucasjellema @myfear @TylerJewell Packt Publishing ?Get 50% off ALL our DRM-free eBooks - this weekend only! Go to http://www.packtpub.com/ and use code BIG50, as often as you like! #BIG50 OracleBlogs ?Global Perspective: ACE Director from EMEA Weighs in on AppAdvantage http://ow.ly/2Afek2 orclateamsoa ?#orclateamsoa Blog: BPM Auditing Demystified - I've heard from a couple of customers recently asking about BPM aud... http://ow.ly/2AfbAn AMIS, Oracle & Java ?Cool #soasuite 12c feature managed file transfer - visit Dave Barry at demo point sr212 #oow #soacommunity pic.twitter.com/gb4HLbUarR SOA Community ?Let us know what was best at #OOW @soacommunity save trip home - thanks for coming to #SF ;-) see you at #OOW2014 pic.twitter.com/xbWXjRapqh Lonneke Dikmans ?Nice @dschmied is talking about the different steps in his project. He starts with explaining the user interface design #oow13 #ux #acm Lonneke Dikmans ?Saving the best for the end: managing knowledge worker processes by @dschmied and Prasen.#oow13 #acm cool stuff: adaptive case management Luis Augusto Weir ?SOA Governance is more than just OER. Requires people, processes and tools. Check it out #SOA #soacommunity http://youtu.be/Ohn06smVKVw Lonneke Dikmans ?“@OracleSOA: #oow Join us for:Enterprise SOA Infrastructure Best Practices Thu 9/26 2:00 PM - 3:00 PM Moscone West - 2020 SOA Community ?Business Process Management (BPM) 11g PS6 Awareness Course http://wp.me/p10C8u-1as Ajay Khanna ?Detect, Analyze, Act - Fast! http://wp.me/p10C8u-1ao via @soacommunity #OracleBPM Simone Geib ?It took a while, but I finally reached 500 followers. Thanks everybody and especially @soacommunity :) SOA Community ?Functional Testing Business Processes In Oracle BPM Suite 11g by Arun Pareek http://wp.me/p10C8u-1aq SOA Community Distribute the September edition of the SOA Community newsletter READ it! Didn't receive it register http://www.oracle.com/goto/emea/soa #soacommunity SOA Community ?Detect, Analyze, Act - Fast! by Ajay Khanna http://wp.me/p10C8u-1ao Robert van Mölken ?Finalised my #OOW presentation #CON8736 and live demo on wednesday 25th at 11:45am. Also giving a short version at the SOA CAB on thursday. Rajesh Raheja ?"The AppAdvantage of Oracle Cloud & On-premises Integration" http://bit.ly/14RYHmZ SOA Community ?Additional new content SOA & BPM Partner Community http://wp.me/p10C8u-1aw Dain Hansen ?Right now #oow13 SOA, BPM - Customer Advisory Boards. 'No tweeting' says @SOASimone. Instagram of funny cats still ok. leonsmiers ?Case Management with Oracle BPM Suite our presentation on #oow13 http://www.slideshare.net/leonsmiers/oracle-open-world-2013-case-management-smiers-kitson … #capgemini @nkitson72 Mark Simpson ?Flextronics reduced cost of processing an invoice to <$1 from $7 due to BPM @OracleBPM #oow13 saving millions. Way less than industry avg. Holger Mueller ?#Siemens Shared Services CIO says that #Fusion #Middleware made the difference for #Oracle over #Workday. #Integration matters. #OOW13 oracleopenworld ?Miss any #oow13 keynotes, or simply want to rewatch? Check out the live streaming site for keynotes on demand: http://pub.vitrue.com/RG4D SOA Community ?Analyze your m2m data and act on it! Big data Pattern matching, fast data & soa #soacommunity #oow pic.twitter.com/48Q1z4ckh7 SOA Community ?Top tweets SOA Partner Community – September 2013 http://wp.me/p10C8u-1cR Simone Geib ?#oraclesoa hands on lab at #oow13 pic.twitter.com/IJJrqXIMiu Danilo Schmiedel #oow13 CON8436: Managing Knowledge Worker Processes. Come & get a free Adaptive Case Management poster @soacommunity pic.twitter.com/FRc2CSyLwb John Sim ?Great job again Jurgen @soacommunity helping bring Ace Community together! Danilo Schmiedel ?Excellent #OracleBPM Adaptive Case Management intro by @heidibuelowBPM and Prasen at the #oow13 demo ground.Last chance today @soacommunity SOA Community ?Thanks to all our #bpm #soa and #weblogic partners for the great middleware business #oow #soacommunity pic.twitter.com/dBwZ8DMHfH Whitehorses ?Thanks @soacommunity for the party tonight. Great to meet product management & see all the talented EMEA middleware specialists. #oow13 Danilo Schmiedel ?Great tool demo from Link Consulting about managing your SOA with OER #oow13 @soacommunity Torsten Winterberg ?“@soacommunity: thanks to @dschmied and @OC_WIRE for making it happen to have our case management poster as printed version hier at #oow13 Ronald Luttikhuizen ?These were the architects involved in the diagram excitement :) just after State of SOA podcast with @OTNArchBeat pic.twitter.com/5B8jIrVTA9 SOA Community ?Tanks to AVIO for the excellent #bpmn poster and the great bpm business - visit then at #OOW & get the poster pic.twitter.com/ebTg9pFY1C Dain Hansen ?Kurian introducing Oracle Platform-as-a-Service developments. #oow13 #OracleCloud pic.twitter.com/evJLTU53rx Bruce Tierney ?API Management "multi-level pie chart" at #oow13 by Oracle's Tim Hall pic.twitter.com/q12OIRdaue Dain Hansen ?This is not your Daddy's BAM @soacommunity: Is this BAM? Very cool in #soasuite 12c get a demo at sr225 pic.twitter.com/EvwqXW9U5j SOA Community ?Is this BAM? Very cool in #soasuite 12c get a demo at sr225 pic.twitter.com/LybHxyF362 SOA Community ?SOA governance by @Yogesh_Sontakke at demo point sr214 many good new features - key for soa projects #oow #soa pic.twitter.com/DFK0ummsK1 SOA Community ?Cool #soasuite 12c feature managed file transfer - visit Dave Barry at demo point sr212 #oow #soacommunity pic.twitter.com/GDKcqDGhCF SOA Community ?Adaptive Case Management demo point at #OOW visit @heidibuelowBPM get a demo and cmmn notation poster #soacommunity pic.twitter.com/T7yEyI7tdn Lonneke Dikmans ?In case you missed it: http://blog.vennster.nl/2013/09/case-management-part-1.html?spref=tw … Lucas Jellema ?SOA Suite news: Cloud Adapters RightNow and SalesForce plus SDK to develop custom cloud adapters (CY13); REST/JSON support in SB/SCA (12c) Oracle SOA ?Cloud Integration and AppAdvantage: Transform your Enterprise #soa #oow13 http://pub.vitrue.com/UfPB Dain Hansen ?Cloud Integration and AppAdvantage: Transform your Enterprise #soa #oow13 http://pub.vitrue.com/4QWA Hajo Normann ?#BigData, eventing & real time #analytics suggest timely next actions in #oracleBPM & #oracleACM; #oow13 #FastData pic.twitter.com/aFVGrTXPqu Mark Simpson ?OEP CQL engine now used in BAM12c for event stream summary computation with temporal and pattern match features to feed dashboards. #oow13 Mark Simpson ?BAM12c virtually a new product. Analytics that senses ahead of time and also compares to historical trends to guide process or case #oow13 Andrejus Baranovskis ?Enabling UI Shell 12c/11g Multitasking Behavior http://fb.me/18l9vxQfA Amit Zavery ?Oracle Fusion Middleware Empowers Business Users, EVP Thomas Kurian's session summary http://onforb.es/18Ta1jf #oow13 #oraclemiddle #oracle Vikas Anand ?#oow13 #oracleopenworld BPM on display at Middleware keynote by Thomas Kurian pic.twitter.com/PMm719S0Ui SOA Community ?BPM composer - business user empowerment #oow #soacommunity #bpmsuite pic.twitter.com/0Qgl6oVh0h SOA Community ?Model your process in BPMN - make is executable and analyze & improve them #oow #soacommunity pic.twitter.com/jkLlObDdoi Bruce Tierney ?@demed and Thomas Kurian talk mobile and cloud at #oow13 pic.twitter.com/bAAeqn5a2V Amit Zavery ?Thomas Kurian showcasing all the new features of Oracle Fusion Middleware #oraclemiddle #oow13 SOA Community ?Demo time cloud adapters in #soasuite at Thomas Kurian keynote. Build and integrate mobile apps in minutes #oow pic.twitter.com/qTnCOJLLwS SOA Community ?Soa suite cloud adapters and mobile apps by @demed at Thomas Kurian keynote #oow #oracle #soacommunity pic.twitter.com/5aMLkNH4Ng Danilo Schmiedel ?First impressions from Oracle Open World 2013 http://wp.me/p2fG8x-77 @soacommunity @OC_WIRE SOA Community ?Good morning SFO let us know if you attend #OOW & #OPN keynote - #soacommunity pic.twitter.com/hzLYGDlRgE Simon Haslam ?Had a very useful @wlscommunity PAC meeting yesterday... & probably the best swag to date! pic.twitter.com/Lqus8ysbp7 Vikas Anand ?Oracle SOA Suite - Team Blog http://bit.ly/18I1Zj7 Rajesh Raheja ?Introducing new Cloud Connectivity Adapters #soa #demopod #oow13. I'll be there Sep 23 & 24 3-6pm to meetup http://bit.ly/18I1Zj7 leonsmiers ?..and again a very successful Oracle SOA/BPM partner council on the eve of #oow13. Thanks Jurgen! @soacommunity pic.twitter.com/aM1LMlb7Yw Vikas Anand ?#oow13 #soa #oep #exalogic Canon Delivers Fast Data with Oracle Event Processing (Oracle SOA Suite) http://bit.ly/1dwPeHb #soacommunity Rolf Scheuch ?The ACM poster is a big success. Great talks and .... I am soon out of posters! #bpmcon #ACM pic.twitter.com/TriaUyXRWK Oracle SOA ?British Telecom Sucess with Oracle B2B #oow #soa #b2b http://pub.vitrue.com/1RWi leonsmiers ?(Oracle) Case Management supporting re-platforming, a pre-read before our presentation at #oow13 http://leonsmiers.blogspot.com/2013/09/case-management-supporting-re.html … #capgemini #yammer SOA & BPM Partner CommunityFor regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: Twitter,SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• SQL SERVER – Guest Post – Jonathan Kehayias – Wait Type – Day 16 of 28

  - by pinaldave

  Jonathan Kehayias (Blog | Twitter) is a MCITP Database Administrator and Developer, who got started in SQL Server in 2004 as a database developer and report writer in the natural gas industry. After spending two and a half years working in TSQL, in late 2006, he transitioned to the role of SQL Database Administrator. His primary passion is performance tuning, where he frequently rewrites queries for better performance and performs in depth analysis of index implementation and usage. Jonathan blogs regularly on SQLBlog, and was a coauthor of Professional SQL Server 2008 Internals and Troubleshooting. On a personal note, I think Jonathan is extremely positive person. In every conversation with him I have found that he is always eager to help and encourage. Every time he finds something needs to be approved, he has contacted me without hesitation and guided me to improve, change and learn. During all the time, he has not lost his focus to help larger community. I am honored that he has accepted to provide his views on complex subject of Wait Types and Queues. Currently I am reading his series on Extended Events. Here is the guest blog post by Jonathan: SQL Server troubleshooting is all about correlating related pieces of information together to indentify where exactly the root cause of a problem lies. In my daily work as a DBA, I generally get phone calls like, “So and so application is slow, what’s wrong with the SQL Server.” One of the funny things about the letters DBA is that they go so well with Default Blame Acceptor, and I really wish that I knew exactly who the first person was that pointed that out to me, because it really fits at times. A lot of times when I get this call, the problem isn’t related to SQL Server at all, but every now and then in my initial quick checks, something pops up that makes me start looking at things further. The SQL Server is slow, we see a number of tasks waiting on ASYNC_IO_COMPLETION, IO_COMPLETION, or PAGEIOLATCH_* waits in sys.dm_exec_requests and sys.dm_exec_waiting_tasks. These are also some of the highest wait types in sys.dm_os_wait_stats for the server, so it would appear that we have a disk I/O bottleneck on the machine. A quick check of sys.dm_io_virtual_file_stats() and tempdb shows a high write stall rate, while our user databases show high read stall rates on the data files. A quick check of some performance counters and Page Life Expectancy on the server is bouncing up and down in the 50-150 range, the Free Page counter consistently hits zero, and the Free List Stalls/sec counter keeps jumping over 10, but Buffer Cache Hit Ratio is 98-99%. Where exactly is the problem? In this case, which happens to be based on a real scenario I faced a few years back, the problem may not be a disk bottleneck at all; it may very well be a memory pressure issue on the server. A quick check of the system spec’s and it is a dual duo core server with 8GB RAM running SQL Server 2005 SP1 x64 on Windows Server 2003 R2 x64. Max Server memory is configured at 6GB and we think that this should be enough to handle the workload; or is it? This is a unique scenario because there are a couple of things happening inside of this system, and they all relate to what the root cause of the performance problem is on the system. If we were to query sys.dm_exec_query_stats for the TOP 10 queries, by max_physical_reads, max_logical_reads, and max_worker_time, we may be able to find some queries that were using excessive I/O and possibly CPU against the system in their worst single execution. We can also CROSS APPLY to sys.dm_exec_sql_text() and see the statement text, and also CROSS APPLY sys.dm_exec_query_plan() to get the execution plan stored in cache. Ok, quick check, the plans are pretty big, I see some large index seeks, that estimate 2.8GB of data movement between operators, but everything looks like it is optimized the best it can be. Nothing really stands out in the code, and the indexing looks correct, and I should have enough memory to handle this in cache, so it must be a disk I/O problem right? Not exactly! If we were to look at how much memory the plan cache is taking by querying sys.dm_os_memory_clerks for the CACHESTORE_SQLCP and CACHESTORE_OBJCP clerks we might be surprised at what we find. In SQL Server 2005 RTM and SP1, the plan cache was allowed to take up to 75% of the memory under 8GB. I’ll give you a second to go back and read that again. Yes, you read it correctly, it says 75% of the memory under 8GB, but you don’t have to take my word for it, you can validate this by reading Changes in Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2. In this scenario the application uses an entirely adhoc workload against SQL Server and this leads to plan cache bloat, and up to 4.5GB of our 6GB of memory for SQL can be consumed by the plan cache in SQL Server 2005 SP1. This in turn reduces the size of the buffer cache to just 1.5GB, causing our 2.8GB of data movement in this expensive plan to cause complete flushing of the buffer cache, not just once initially, but then another time during the queries execution, resulting in excessive physical I/O from disk. Keep in mind that this is not the only query executing at the time this occurs. Remember the output of sys.dm_io_virtual_file_stats() showed high read stalls on the data files for our user databases versus higher write stalls for tempdb? The memory pressure is also forcing heavier use of tempdb to handle sorting and hashing in the environment as well. The real clue here is the Memory counters for the instance; Page Life Expectancy, Free List Pages, and Free List Stalls/sec. The fact that Page Life Expectancy is fluctuating between 50 and 150 constantly is a sign that the buffer cache is experiencing constant churn of data, once every minute to two and a half minutes. If you add to the Page Life Expectancy counter, the consistent bottoming out of Free List Pages along with Free List Stalls/sec consistently spiking over 10, and you have the perfect memory pressure scenario. All of sudden it may not be that our disk subsystem is the problem, but is instead an innocent bystander and victim. Side Note: The Page Life Expectancy counter dropping briefly and then returning to normal operating values intermittently is not necessarily a sign that the server is under memory pressure. The Books Online and a number of other references will tell you that this counter should remain on average above 300 which is the time in seconds a page will remain in cache before being flushed or aged out. This number, which equates to just five minutes, is incredibly low for modern systems and most published documents pre-date the predominance of 64 bit computing and easy availability to larger amounts of memory in SQL Servers. As food for thought, consider that my personal laptop has more memory in it than most SQL Servers did at the time those numbers were posted. I would argue that today, a system churning the buffer cache every five minutes is in need of some serious tuning or a hardware upgrade. Back to our problem and its investigation: There are two things really wrong with this server; first the plan cache is excessively consuming memory and bloated in size and we need to look at that and second we need to evaluate upgrading the memory to accommodate the workload being performed. In the case of the server I was working on there were a lot of single use plans found in sys.dm_exec_cached_plans (where usecounts=1). Single use plans waste space in the plan cache, especially when they are adhoc plans for statements that had concatenated filter criteria that is not likely to reoccur with any frequency.  SQL Server 2005 doesn’t natively have a way to evict a single plan from cache like SQL Server 2008 does, but MVP Kalen Delaney, showed a hack to evict a single plan by creating a plan guide for the statement and then dropping that plan guide in her blog post Geek City: Clearing a Single Plan from Cache. We could put that hack in place in a job to automate cleaning out all the single use plans periodically, minimizing the size of the plan cache, but a better solution would be to fix the application so that it uses proper parameterized calls to the database. You didn’t write the app, and you can’t change its design? Ok, well you could try to force parameterization to occur by creating and keeping plan guides in place, or we can try forcing parameterization at the database level by using ALTER DATABASE <dbname> SET PARAMETERIZATION FORCED and that might help. If neither of these help, we could periodically dump the plan cache for that database, as discussed as being a problem in Kalen’s blog post referenced above; not an ideal scenario. The other option is to increase the memory on the server to 16GB or 32GB, if the hardware allows it, which will increase the size of the plan cache as well as the buffer cache. In SQL Server 2005 SP1, on a system with 16GB of memory, if we set max server memory to 14GB the plan cache could use at most 9GB  [(8GB*.75)+(6GB*.5)=(6+3)=9GB], leaving 5GB for the buffer cache.  If we went to 32GB of memory and set max server memory to 28GB, the plan cache could use at most 16GB [(8*.75)+(20*.5)=(6+10)=16GB], leaving 12GB for the buffer cache. Thankfully we have SQL Server 2005 Service Pack 2, 3, and 4 these days which include the changes in plan cache sizing discussed in the Changes to Caching Behavior between SQL Server 2000, SQL Server 2005 RTM and SQL Server 2005 SP2 blog post. In real life, when I was troubleshooting this problem, I spent a week trying to chase down the cause of the disk I/O bottleneck with our Server Admin and SAN Admin, and there wasn’t much that could be done immediately there, so I finally asked if we could increase the memory on the server to 16GB, which did fix the problem. It wasn’t until I had this same problem occur on another system that I actually figured out how to really troubleshoot this down to the root cause.  I couldn’t believe the size of the plan cache on the server with 16GB of memory when I actually learned about this and went back to look at it. SQL Server is constantly telling a story to anyone that will listen. As the DBA, you have to sit back and listen to all that it’s telling you and then evaluate the big picture and how all the data you can gather from SQL about performance relate to each other. One of the greatest tools out there is actually a free in the form of Diagnostic Scripts for SQL Server 2005 and 2008, created by MVP Glenn Alan Berry. Glenn’s scripts collect a majority of the information that SQL has to offer for rapid troubleshooting of problems, and he includes a lot of notes about what the outputs of each individual query might be telling you. When I read Pinal’s blog post SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28, I noticed that he referenced Checking Memory Related Performance Counters in his post, but there was no real explanation about why checking memory counters is so important when looking at an I/O related wait type. I thought I’d chat with him briefly on Google Talk/Twitter DM and point this out, and offer a couple of other points I noted, so that he could add the information to his blog post if he found it useful.  Instead he asked that I write a guest blog for this. I am honored to be a guest blogger, and to be able to share this kind of information with the community. The information contained in this blog post is a glimpse at how I do troubleshooting almost every day of the week in my own environment. SQL Server provides us with a lot of information about how it is running, and where it may be having problems, it is up to us to play detective and find out how all that information comes together to tell us what’s really the problem. This blog post is written by Jonathan Kehayias (Blog | Twitter). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• Restore Your PC from Windows Home Server

  - by Mysticgeek

  If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Installing SharePoint 2013 on Windows 2012- standalone installation

  - by sreejukg

  In this article, I am going to share my experience while installing SharePoint 2013 on Windows 2012. This was the first time I tried SharePoint 2013. So I thought sharing the same will benefit somebody who would like to install SharePoint 2013 as a standalone installation. Standalone installation is meant for evaluation/development purposes. For production environments, you need to follow the best practices and create required service accounts. Microsoft has published the deployment guide for SharePoint 2013, you can download this from the below link. http://www.microsoft.com/en-us/download/details.aspx?id=30384 Since this is for development environment, I am not going to create any service account, I logged in to Windows 2012 as an administrator and just placed my installation DVD on the drive. When I run the setup from the DVD, the below splash screen appears. This reflects the new UI changes happening with all Microsoft based applications; the interface matches the metro style applications (Windows 8 style). As you can see the options are same as that of the SharePoint 2010 installation screen. Click on the “install software prerequisites” link to get all the prerequisites get installed. You need a valid internet connection to do this. Clicking on the install software prerequisites will bring the following dialog. Click Next, you will see the terms and conditions. Select I accept check box and click Next. The installation will start immediately. For any reason, if you stop the installation and start it later, the product preparation tool will check whether a particular component is installed and if yes, then the installation of that particular component will be skipped. If you do not have internet connection, you will face the download error as follows. At any point of failure, the error log will be available for you to review. If all OK, you will reach the below dialog, this means some components will be installed once the PC is rebooted. Be noted that the clicking on finish will not ask you for further confirmation. So make sure to save all your work before clicking on finish button. Once the server is restarted, the product preparation tool will start automatically and you will see the following dialog. Now go to the SharePoint 2013 splash page and click on “Install SharePoint Server” link. You need to enter the product key here. Enter the product key as you received and click continue. Select the Checkbox for the license agreement and click on continue button. Now you need to select the installation type. Select Stand-alone and click on “Install Now” button. A dialog will pop up that updates you with the process and progress. The installation took around 15-20 minutes with 2 GB or Ram installed in the server, seems fair. Once the installation is over, you will see the following Dialog. Make sure you select the Run the products and configuration wizard. If you miss to select the check box, you can find the products and configuration wizard from the start tiles. The products and configuration wizard will start. If you get any dialog saying some of the services will be stopped, you just accept it. Since we selected standalone installation, it will not ask for any user input, as it already knows the database to be configured. Once the configuration is over without any problems you will see the configuration successful message. Also you can find the link to central administration on the Start Screen.     Troubleshooting During my first setup process, I got the below error. System.ArgumentException: The SDDL string contains an invalid sid or a sid that cannot be translated. Parameter name: sddlForm at System.Security.AccessControl.RawSecurityDescriptor.BinaryFormFromSddlForm(String sddlForm) at System.Security.AccessControl.RawSecurityDescriptor..ctor(String sddlForm) at Microsoft.SharePoint.Win32.SPNetApi32.CreateShareSecurityDescriptor(String[] readNames, String[] changeNames, String[] fullControlNames, String& sddl) at Microsoft.SharePoint.Win32.SPNetApi32.CreateFileShare(String name, String description, String path) at Microsoft.SharePoint.Administration.SPServer.CreateFileShare(String name, String description, String path) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.CreateAnalyticsUNCShare(String dirParentLocation, String shareName) at Microsoft.Office.Server.Search.Administration.AnalyticsAdministration.ProvisionAnalyticsShare(SearchServiceApplication serviceApplication) ………………………………………… ………………………………………… The configuration wizard displayed the error as below. The error occurred in step 8 of the configuration wizard and by the time the central administration is already provisioned. So from the start, I was able to open the central administration website, but the search service application was showing as error. I found a good blog that specifies the reason for error. http://kbdump.com/sharepoint2013-standalone-config-error-create-sample-data/ The workaround specified in the blog works fine. I think SharePoint must be provisioning Search using the Network Service account, so instead of giving permission to everyone, you could try giving permission to Network Service account(I didn’t try this yet, buy you could try and post your feedback here). In production environment you will have specific accounts that have access rights as recommended by Microsoft guidelines. Installation of SharePoint 2013 is pretty straight forward. Hope you enjoyed the article!

  Read the article

• Smarter, Faster, Cheaper: The Insurance Industry’s Dream

  - by Jenna Danko

  On June 3rd, I saw the Gaylord Resort Centre in Washington D.C. become the hub of C level executives and managers of insurance carriers for the IASA 2013 Conference.  Insurance Accounting/Regulation and Technology sessions took the focus, but there were plenty of tertiary sessions for career development, which complemented the overall strong networking side of the conference.  As an exhibitor, Oracle, along with several hundred other product providers, welcomed the opportunity to display and demonstrate our solutions and we were encouraged by hustle and bustle of the exhibition floor.  The IASA organizers had pre-arranged fast track tours whereby interested conference delegates could sign up for a series of like-themed presentations from Vendors, giving them a level of 'Speed Dating' introductions to possible solutions and services.  Oracle participated in a number of these, which were very well subscribed.  Clearly, the conference had a strong business focus; however, attendees saw technology as a key enabler to get their processes done smarter, faster and cheaper.  As we navigated through the exhibition, it became clear from the inquiries that came to us that insurance carriers are gravitating to a number of focus areas: Navigating the maze of upcoming regulatory reporting changes. For US carriers with European holdings, Solvency II carries a myriad of rules and reporting requirements. Alignment across the globe of the Own Risk and Solvency Assessment (ORSA) processes brings to the fore the National Insurance of Insurance commissioners' (NAIC) recent guidance manual publication. Doing more with less and to certainly expect more from technology for less dollars. The overall cost of IT, in particular hardware, has dropped in real terms (though the appetite for more has risen: more CPU, more RAM, more storage), but software has seen less change. Clearly, customers expect either to pay less or get a lot more from their software solutions for the same buck. Doing things smarter – A recognition that with the advance of technology to stand still no longer means you are technically going backwards. Technology and, in particular technology interactions with human business processes, has undergone incredible change over the past 5 years. Consumer usage (iPhones, etc.) has been at the forefront, but now at the Enterprise level ever more effective technology exploitation is beginning to take place. That data and, in particular gleaning knowledge from data, is refining and improving business processes.  Organizations are now consuming more data than ever before, and it is set to grow exponentially for some time to come.  Amassing large volumes of data is one thing, but effectively analyzing that data is another.  It is the results of such analysis that leads to improvements both in terms of insurance product offerings and the processes to support them. Regulatory Compliance, damned if you do and damned if you don’t! Clearly, around the globe at lot is changing from a regulatory perspective and it is evident that in terms of regulatory requirements, whilst there is a greater convergence across jurisdictions bringing uniformity, there is also a lot of work to be done in the next 5 years. Just like the big data, hidden behind effective regulatory compliance there often lies golden nuggets that can give competitive advantages. From Oracle's perspective, our Rating Engine, Billing, Document Management and Insurance Analytics solutions on display served to strike up good conversations and, as is always the case at conferences, it was a great opportunity to meet and speak with existing Oracle customers that we might not have otherwise caught up with for a while. Fortunately, I was able to catch up on a few sessions at the close of the Exhibition.  The speaker quality was high and the audience asked challenging, but pertinent, questions.  During Dr. Jackie Freiberg’s keynote “Bye Bye Business as Usual,” the author discussed 8 strategies to help leaders create a culture where teams consistently deliver innovative ideas by disrupting the status quo.  The very first strategy: Get wired for innovation.  Freiberg admitted that folks in the insurance and financial services industry understand and know innovation is important, but oftentimes they are slow adopters.  Today, technology and innovation go hand in hand. In speaking to delegates during and after the conference, a high degree of satisfaction could be measured from their positive comments of speaker sessions and the exhibitors. I suspect many will be back in 2014 with Indianapolis as the conference location. Did you attend the IASA Conference in Washington D.C.?  If so, I would love to hear your comments. Andrew Collins is the Director, Solvency II of Oracle Financial Services. He can be reached at andrew.collins AT oracle.com.

  Read the article

• Speeding up a search .net 4.0

  - by user231465

  Wondering if I can speed up the search. I need to build a functionality that has to be used by many UI screens The one I have got works but I need to make sure I am implementing a fast algoritim if you like It's like an incremental search. User types a word to search for eg const string searchFor = "Guinea"; const char nextLetter = ' ' It looks in the list and returns 2 records "Guinea and Guinea Bissau " User types a word to search for eg const string searchFor = "Gu"; const char nextLetter = 'i' returns 3 results. This is the function but I would like to speed it up. Is there a pattern for this kind of search? class Program { static void Main() { //Find all countries that begin with string + a possible letter added to it //const string searchFor = "Guinea"; //const char nextLetter = ' '; //returns 2 results const string searchFor = "Gu"; const char nextLetter = 'i'; List<string> result = FindPossibleMatches(searchFor, nextLetter); result.ForEach(x=>Console.WriteLine(x)); //returns 3 results Console.Read(); } /// <summary> /// Find all possible matches /// </summary> /// <param name="searchFor">string to search for</param> /// <param name="nextLetter">pretend user as just typed a letter</param> /// <returns></returns> public static List<string> FindPossibleMatches (string searchFor, char nextLetter) { var hashedCountryList = new HashSet<string>(CountriesList()); var result=new List<string>(); IEnumerable<string> tempCountryList = hashedCountryList.Where(x => x.StartsWith(searchFor)); foreach (string item in tempCountryList) { string tempSearchItem; if (nextLetter == ' ') { tempSearchItem = searchFor; } else { tempSearchItem = searchFor + nextLetter; } if(item.StartsWith(tempSearchItem)) { result.Add(item); } } return result; } /// <summary> /// Returns list of countries. /// </summary> public static string[] CountriesList() { return new[] { "Afghanistan", "Albania", "Algeria", "American Samoa", "Andorra", "Angola", "Anguilla", "Antarctica", "Antigua And Barbuda", "Argentina", "Armenia", "Aruba", "Australia", "Austria", "Azerbaijan", "Bahamas", "Bahrain", "Bangladesh", "Barbados", "Belarus", "Belgium", "Belize", "Benin", "Bermuda", "Bhutan", "Bolivia", "Bosnia Hercegovina", "Botswana", "Bouvet Island", "Brazil", "Brunei Darussalam", "Bulgaria", "Burkina Faso", "Burundi", "Byelorussian SSR", "Cambodia", "Cameroon", "Canada", "Cape Verde", "Cayman Islands", "Central African Republic", "Chad", "Chile", "China", "Christmas Island", "Cocos (Keeling) Islands", "Colombia", "Comoros", "Congo", "Cook Islands", "Costa Rica", "Cote D'Ivoire", "Croatia", "Cuba", "Cyprus", "Czech Republic", "Czechoslovakia", "Denmark", "Djibouti", "Dominica", "Dominican Republic", "East Timor", "Ecuador", "Egypt", "El Salvador", "England", "Equatorial Guinea", "Eritrea", "Estonia", "Ethiopia", "Falkland Islands", "Faroe Islands", "Fiji", "Finland", "France", "Gabon", "Gambia", "Georgia", "Germany", "Ghana", "Gibraltar", "Great Britain", "Greece", "Greenland", "Grenada", "Guadeloupe", "Guam", "Guatemela", "Guernsey", "Guiana", "Guinea", "Guinea Bissau", "Guyana", "Haiti", "Heard Islands", "Honduras", "Hong Kong", "Hungary", "Iceland", "India", "Indonesia", "Iran", "Iraq", "Ireland", "Isle Of Man", "Israel", "Italy", "Jamaica", "Japan", "Jersey", "Jordan", "Kazakhstan", "Kenya", "Kiribati", "Korea, South", "Korea, North", "Kuwait", "Kyrgyzstan", "Lao People's Dem. Rep.", "Latvia", "Lebanon", "Lesotho", "Liberia", "Libya", "Liechtenstein", "Lithuania", "Luxembourg", "Macau", "Macedonia", "Madagascar", "Malawi", "Malaysia", "Maldives", "Mali", "Malta", "Mariana Islands", "Marshall Islands", "Martinique", "Mauritania", "Mauritius", "Mayotte", "Mexico", "Micronesia", "Moldova", "Monaco", "Mongolia", "Montserrat", "Morocco", "Mozambique", "Myanmar", "Namibia", "Nauru", "Nepal", "Netherlands", "Netherlands Antilles", "Neutral Zone", "New Caledonia", "New Zealand", "Nicaragua", "Niger", "Nigeria", "Niue", "Norfolk Island", "Northern Ireland", "Norway", "Oman", "Pakistan", "Palau", "Panama", "Papua New Guinea", "Paraguay", "Peru", "Philippines", "Pitcairn", "Poland", "Polynesia", "Portugal", "Puerto Rico", "Qatar", "Reunion", "Romania", "Russian Federation", "Rwanda", "Saint Helena", "Saint Kitts", "Saint Lucia", "Saint Pierre", "Saint Vincent", "Samoa", "San Marino", "Sao Tome and Principe", "Saudi Arabia", "Scotland", "Senegal", "Seychelles", "Sierra Leone", "Singapore", "Slovakia", "Slovenia", "Solomon Islands", "Somalia", "South Africa", "South Georgia", "Spain", "Sri Lanka", "Sudan", "Suriname", "Svalbard", "Swaziland", "Sweden", "Switzerland", "Syrian Arab Republic", "Taiwan", "Tajikista", "Tanzania", "Thailand", "Togo", "Tokelau", "Tonga", "Trinidad and Tobago", "Tunisia", "Turkey", "Turkmenistan", "Turks and Caicos Islands", "Tuvalu", "Uganda", "Ukraine", "United Arab Emirates", "United Kingdom", "United States", "Uruguay", "Uzbekistan", "Vanuatu", "Vatican City State", "Venezuela", "Vietnam", "Virgin Islands", "Wales", "Western Sahara", "Yemen", "Yugoslavia", "Zaire", "Zambia", "Zimbabwe" }; } } } Any suggestions? Thanks

  Read the article

• Does HTML 5 &ldquo;Rich vs. Reach&rdquo; a False Choice?

  - by andrewbrust

  The competition between the Web and proprietary rich platforms, including Windows, Mac OS, iPhone/iPad, Adobe’s Flash/AIR and Microsoft’s Silverlight, is not new. But with the emergence of HTML 5 and imminent support for it in the next release of the major Web browsers, the battle is heating up. And with the announcements made Wednesday at Google's I/O conference, it's getting kicked up yet another notch. The impact of this platform battle on companies in the media and advertising world, and the developers who serve them, is significant. The most prominent question is whether video and rich media online will shift towards pure HTML and away from plug-ins like Flash and Silverlight. In fact, certain features in HTML 5 make it suitable for development for line of business applications as well, further threatening those plug-in technologies. So what's the deal? Is this real or hype? To answer that question, I've done my own research into HTML 5's features and talked to several media-focused, New York area developers to get their opinions. I present my findings to you in this post. Before bearing down into HTML 5 specifics and practitioners’ quotes, let's set the context. To understand what HTML 5 can do, take a look at this video of Sports Illustrated’s HTML 5 prototype. This should start to get you bought into the idea that HTML 5 could be a game-changer. Next, if you happen to have installed the beta version of Google's Chrome 5 browser, take a look at the page linked to below, and in that page, click on any of the game thumbnails to see what's possible, without a plug-in, in this brave new world. (Note, although the instructions for each game tell you to press the A key to start, press the Z key instead.). Here's the link: http://www.kesiev.com/akihabara As an adjunct to what's enabled by HTML 5, consider the various transforms that are part of CSS 3. If you're running Safari as your browser, the following link will showcase this live; if not, you'll see a bitmap that will give you an idea of what's possible: http://webkit.org/blog/386/3d-transforms Are you starting to get the picture (literally)? What has up until now required browser plug-ins and other patches to HTML, most typically Flash, will soon be renderable, natively, in all major browsers. Moreover, it's looking likely that developers will be able to deliver such content and experiences in these browsers using one base of markup and script code (using straight JavaScript and/or jQuery), without resorting to browser-specific code and workarounds. If you're skeptical of this, I wouldn't blame you, especially with respect to Microsoft's Internet Explorer. However, i can tell you with confidence that even Microsoft is dedicated to full-on HTML 5 support in version 9 of that browser, which is currently under development. So what’s new in HTML 5, specifically, that makes sites like this possible?  The specification documents go into deep detail, and there’s no sense in rehashing them here, but a summary is probably in order.   Here is a non-authoritative, but useful, list of the major new feature areas in HTML 5: 2D drawing capabilities and 3D transforms. 2D drawing instructions can be embedded statically into a Web page; application interactivity and animation can be achieved through script.  As mentioned above, 3D transforms are technically part of version 3 of the CSS (Cascading Style Sheets) spec, rather than HTML 5, but they can nonetheless be thought of as part of the bundle.  They allow for rendering of 3D images and animations that, together with 2D drawing, make HTML-based games much more feasible than they are presently, as the links above demonstrate. Embedded audio and video. A media player can appear directly in a rendered Web page, using HTML markup and no plug-ins. Alternately, player controls can be hidden and the content can play automatically. Major enhancements to form-based input. This includes such things as specification of required fields, embedding of text “hints” into a control, limiting valid input on a field to dates, email addresses or a list of values.  There’s more to this, but the gist is that line-of-business applications, with complicated input and data validation, are supported directly Offline caching, local storage and client-side SQL database. These facilities allow Web applications to function more like native apps, even if no internet connection is available. User-defined data. Data (or metadata – data about data) can easily be embedded statically and/or retrieved and updated with Javascript code. This avoids having to embed that data in a separate file, or within script code. Taken together, these features position HTML to compete with, and perhaps overtake, Adobe’s Flash/AIR (and Microsoft’s Silverlight) as a viable Web platform for media, RIAs (rich internet applications – apps that function more like desktop software than Web sites) and interactive Web content, including games. What do players in the media world think about this?  From the embedded video above, we know what Sports Illustrated (and, therefore, Time Warner) think.  Hulu, the major Internet site for broadcast TV content, is on record as saying HTML5 video does not pass muster with them, at least not yet.  YouTube, on the other hand, already has an experimental HTML 5-based version of their site.  TechCrunch has reported that NetFlix is flirting with HTML 5 too, especially as it pertains to embedded browsers in TV-based devices.  And the New York Times’ Web site now embeds some video clips without resorting to Flash.  They have to – otherwise iPhone, iPod Touch and iPad users couldn’t see them in the Mobile Safari browser. What do media-focused developers think about all this?  I talked to several to get their opinions. Michael Pinto is CEO and Founder of Very Memorable Design whose primary focus has been to help marketing directors get traction online.  The firm’s client roster includes the likes Time, Inc., Scholastic and PBS.  Pinto predicts that “More and more microsites that were done entirely in Flash will be done more and more using jQuery. I can also see slideshows and video now being done without Flash. However if you needed to create a game or highly interactive activity Flash would still be the way to go for the web.” A dissenting view comes from Jesse Erlbaum, CEO of The Erlbaum Group, LLC, which serves numerous clients in the magazine publishing sector.  When I asked Erlbaum whether he thought HTML 5 and jQuery/JavaScript would steal significant market share from Flash, he responded “Not at all!  In particular, not for media and advertising customers!  These sectors are not generally in the business of making highly functional applications, which is the one place where HTML5/jQuery/etc really shines.” Ironically, Pinto’s firm is a heavy user of Flash for its projects and Erlbaum’s develops atop the “LAMP” (Linux, Apache, MySQL and PHP/Perl) stack.  For whatever reason, each firm seems to see the other’s toolset as a more viable choice.  But both agree that the developer tool story around HTML 5 is deficient.  Pinto explains “What’s lost with [HTML 5 and Javascript] techniques is that there isn’t a single widely favored easy-to-use tool of choice for authoring. So with Flash you can get up and running right away and not worry about what is different from one browser to the next.“  Erlbaum agrees, saying: “HTML5/Javascript lacks a sophisticated integrated development environment (IDE) which is an essential part of Flash.  If what someone is trying to make is primarily animation, it's a waste of time…to do this in Javascript.  It can be done much more easily in Flash, and with greater cross-browser compatibility and consistency due to the ubiquity of Flash.” Adobe (maker of Flash since its 2005 acquisition of Macromedia) likely agrees.  And for better or worse, they’ve decided to address this shortcoming of HTML 5, even at risk of diminishing their Flash platfrom. Yesterday Adobe announced that their hugely popular Deamweaver Web design authoring tool would directly support HTML 5 and CSS 3 development.  In fact, the Adobe Dreamweaver CS5 HTML5 Pack is downloadable now from Adobe Labs. Maybe Adobe is bowing to pressure from ardent Web professionals like Scott Kellum, Lead Designer at Channel V Media,  a digital and offline branding firm, serving the media and marketing sectors, among others.  Kellum told me that HTML 5 “…will definitely move people away from Flash. It has many of the same functionalities with faster load times and better accessibility. HTML5 will help Flash as well: with the new caching methods you can now even run Flash apps offline.” Although all three Web developers I interviewed would agree that Flash is still required for more sophisticated applications, Kellum seems to have put his finger on why HTML 5 may nonetheless dominate.  In his view, much of the Web development out there has little need for high-end capabilities: “Most people want to add a little punch to a navigation bar or some video and now you can get the biggest bang for your buck with HTML5, CSS3 and Javascript.” I’ve already mentioned that Google’s ongoing I/O conference, at the Moscone West center in San Francisco, is driving the HTML 5 news cycle, big time.  And Google made many announcements of their own, including the open sourcing of their VP8 video codec, new enterprise-oriented capabilities for its App Engine cloud offering, and the creation of the Chrome Web Store, which the company says will make it easier to find and “install” Web applications, in a fashion similar to  the way users procure native apps on various mobile platforms. HTML 5 looks to be disruptive, especially to the media world.  And even if the technology ends up disappointing, the chatter around it alone is causing big changes in the technology world.  If the richness it promises delivers, then magazine publishers and non-text digital advertisers may indeed have a platform for creating compelling content that loads quickly, is standards-based and will render identically in (the newest versions of) all major Web browsers.  Can this development in the digital arena save the titans of the print world?  I can’t predict, but it’s going to be fun to watch, and the competitive innovation from all players in both industries will likely be immense.

  Read the article

• Oracle SQL Developer v3.2.1 Now Available

  - by thatjeffsmith

  Oracle SQL Developer version 3.2.1 is now available. I recommend that everyone now upgrade to this release. It features more than 200 bug fixes, tweaks, and polish applied to the 3.2 edition. The high profile bug fixes submitted by customers and users on our forums are listed in all their glory for your review. I want to highlight a few of the changes though, as I recognize many of you lack the time and/or patience to ‘read the docs.’ That would include me, which is why I enjoy writing these kinds of blog posts. I’m lazy – just like you! No more artificial line breaks between CREATE OR REPLACE and your PL/SQL In versions 3.2 and older, when you pull up your stored procedural objects in our editor, you would see a line break inserted between the CREATE OR REPLACE and then the body of your code. In version 3.2.1, we have removed the line break. 3.1 3.2.1 Trivia Did You Know? The database doesn’t store the ‘CREATE’ or ‘CREATE OR REPLACE’ bit of your PL/SQL code in the database. If we look at the USER_SOURCE view, we can see that the code begins with the object name. So the CREATE OR REPLACE bit is ‘artificial’ The intent is to give you the code necessary to recreate your object – and have it ‘compile’ into the database. We pretty much HAVE to add the ‘CREATE OR REPLACE.’ From now on it will appear inline with the first line of your code. Exporting Tables & Views When exporting data from your tables or views, previous versions of SQL Developer presented a 3 step wizard. It allows you to choose your columns and apply data filters for what is exported. This was kind of redundant. The grids already allowed you to select your columns and apply filters. Wouldn’t it be more intuitive AND efficient to just make the grids behave in a What You See Is What You Get (WYSIWYG) fashion? In version 3.2.1, that is exactly what will happen. The wizard now only has two steps and the grid will export the data and columns as defined in the visible grid. Let the grid properties define what is actually exported! And here is what is pasted into my worksheet: "BREWERY"|"CITY" "3 Brewers Restaurant Micro-Brewery"|"Toronto" "Amsterdam Brewing Co."|"Toronto" "Ball Brewing Company Ltd."|"Toronto" "Big Ram Brewing Company"|"Toronto" "Black Creek Historic Brewery"|"Toronto" "Black Oak Brewing"|"Toronto" "C'est What?"|"Toronto" "Cool Beer Brewing Company"|"Toronto" "Denison's Brewing"|"Toronto" "Duggan's Brewery"|"Toronto" "Feathers"|"Toronto" "Fermentations! - Danforth"|"Toronto" "Fermentations! - Mount Pleasant"|"Toronto" "Granite Brewery & Restaurant"|"Toronto" "Labatt's Breweries of Canada"|"Toronto" "Mill Street Brew Pub"|"Toronto" "Mill Street Brewery"|"Toronto" "Molson Breweries of Canada"|"Toronto" "Molson Brewery at Air Canada Centre"|"Toronto" "Pioneer Brewery Ltd."|"Toronto" "Post-Production Bistro"|"Toronto" "Rotterdam Brewing"|"Toronto" "Steam Whistle Brewing"|"Toronto" "Strand Brasserie"|"Toronto" "Upper Canada Brewing"|"Toronto" JUST what I wanted And One Last Thing Speaking of export, sometimes I want to send data to Excel. And sometimes I want to send multiple objects to Excel – to a single Excel file that is. In version 3.2.1 you can now do that. Let’s export the bulk of the HR schema to Excel, with each table going to it’s own workbook in the same worksheet. Select many tables, put them in in a single Excel worksheet If you try this in previous versions of SQL Developer it will just write the first table to the Excel file. This is one of the bugs we addressed in v3.2.1. Here is what the output Excel file looks like now: Many tables - Many workbooks in an Excel Worksheet I have a sneaky suspicion that this will be a frequently used feature going forward. Excel seems to be the cornerstone of many of our popular features. Imagine that!

  Read the article

• Slow boot on Ubuntu 12.04

  - by Hailwood

  My Ubuntu is booting really slow (Windows is booting faster...). I am using Ubuntu a Dell Inspiron 1545 Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, 4GB Ram, 500GB HDD running Ubuntu 12.04 with gnome-shell 3.4.1. After running dmesg the culprit seems to be this section, in particular the last three lines: [26.557659] ADDRCONF(NETDEV_UP): eth0: link is not ready [26.565414] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.355355] Console: switching to colour frame buffer device 170x48 [27.362346] fb0: radeondrmfb frame buffer device [27.362347] drm: registered panic notifier [27.362357] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [27.617435] init: udev-fallback-graphics main process (1049) terminated with status 1 [30.064481] init: plymouth-stop pre-start process (1500) terminated with status 1 [51.708241] CE: hpet increased min_delta_ns to 20113 nsec [59.448029] eth2: no IPv6 routers present But I have no idea how to start debugging this. sudo lshw -C video $ sudo lshw -C video *-display description: VGA compatible controller product: RV710 [Mobility Radeon HD 4300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:48 memory:e0000000-efffffff ioport:de00(size=256) memory:f6df0000-f6dfffff memory:f6d00000-f6d1ffff After loading the propriety driver my new dmesg log is below (starting from the first major time gap): [2.983741] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [25.094327] ADDRCONF(NETDEV_UP): eth0: link is not ready [25.119737] udevd[520]: starting version 175 [25.167086] lp: driver loaded but no devices found [25.215341] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [25.215345] Disabling lock debugging due to kernel taint [25.231924] wmi: Mapper loaded [25.318414] lib80211: common routines for IEEE802.11 drivers [25.318418] lib80211_crypt: registered algorithm 'NULL' [25.331631] [fglrx] Maximum main memory to use for locked dma buffers: 3789 MBytes. [25.332095] [fglrx] vendor: 1002 device: 9552 count: 1 [25.334206] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [25.334229] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [25.334235] pci 0000:01:00.0: setting latency timer to 64 [25.337109] [fglrx] Kernel PAT support is enabled [25.337140] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [25.342803] Adding 4189180k swap on /dev/sda7. Priority:-1 extents:1 across:4189180k [25.364031] type=1400 audit(1338241723.027:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=606 comm="apparmor_parser" [25.364491] type=1400 audit(1338241723.031:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" [25.364760] type=1400 audit(1338241723.031:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" [25.394328] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [25.394343] wl 0000:0c:00.0: setting latency timer to 64 [25.415531] acpi device:36: registered as cooling_device2 [25.416688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/LNXVIDEO:00/input/input6 [25.416795] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [25.416865] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [25.425133] lib80211_crypt: registered algorithm 'TKIP' [25.448058] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [25.448321] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [25.448353] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [25.738867] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38 [25.761213] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [25.761406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [25.783432] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [25.908318] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [25.928155] input: Dell WMI hotkeys as /devices/virtual/input/input9 [25.960561] udevd[543]: renamed network interface eth1 to eth2 [26.285688] init: failsafe main process (835) killed by TERM signal [26.396426] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [26.423108] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [26.511297] Bluetooth: Core ver 2.16 [26.511383] NET: Registered protocol family 31 [26.511385] Bluetooth: HCI device and connection manager initialized [26.511388] Bluetooth: HCI socket layer initialized [26.511391] Bluetooth: L2CAP socket layer initialized [26.512079] Bluetooth: SCO socket layer initialized [26.530164] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [26.530168] Bluetooth: BNEP filters: protocol multicast [26.553893] type=1400 audit(1338241724.219:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser" [26.554860] Bluetooth: RFCOMM TTY layer initialized [26.554866] Bluetooth: RFCOMM socket layer initialized [26.554868] Bluetooth: RFCOMM ver 1.11 [26.557910] type=1400 audit(1338241724.223:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser" [26.559166] type=1400 audit(1338241724.223:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser" [26.559574] type=1400 audit(1338241724.223:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser" [26.575519] type=1400 audit(1338241724.239:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=931 comm="apparmor_parser" [26.581100] type=1400 audit(1338241724.247:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=931 comm="apparmor_parser" [26.582794] type=1400 audit(1338241724.247:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=929 comm="apparmor_parser" [26.605672] ppdev: user-space parallel port driver [27.592475] sky2 0000:09:00.0: eth0: enabling interface [27.604329] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.606962] ADDRCONF(NETDEV_UP): eth0: link is not ready [27.852509] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [27.852513] vesafb: scrolling: redraw [27.852515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [27.852523] mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining [27.852527] mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining [27.852531] mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining [27.852534] mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining [27.852538] mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining [27.852541] mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining [27.852544] mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining [27.852548] mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining [27.852551] mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining [27.852554] mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining [27.852558] mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining [27.853154] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005580000, using 3072k, total 3072k [27.853405] Console: switching to colour frame buffer device 128x48 [27.853426] fb0: VESA VGA frame buffer device [28.539800] fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X [28.540552] [fglrx] Firegl kernel thread PID: 1168 [28.540679] [fglrx] Firegl kernel thread PID: 1169 [28.540789] [fglrx] Firegl kernel thread PID: 1170 [28.540932] [fglrx] IRQ 48 Enabled [29.845620] [fglrx] Gart USWC size:1236 M. [29.845624] [fglrx] Gart cacheable size:489 M. [29.845629] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [29.845632] [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 [29.845635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [59.700023] eth2: no IPv6 routers present

  Read the article

• Oracle ATG Web Commerce 10 Implementation Developer Boot Camp - Reading (UK) - October 1-12, 2012

  - by Richard Lefebvre

  REGISTER NOW: Oracle ATG Web Commerce 10 Implementation Developer Boot Camp Reading, UK, October 1-12, 2012! OPN invites you to join us for a 10-day implementation bootcamp on Oracle ATG Web Commerce in Reading, UK from October 1-12, 2012.This 10-day boot camp is designed to provide partners with hands-on experience and technical training to successfully build and deploy Oracle ATG Web Commerce 10 Applications. This particular boot camp is focused on helping partners develop the essential skills needed to implement every aspect of an ATG Commerce Application from scratch, (not CRS-based), with a specific goal of enabling experienced Java/J2EE developers with a path towards becoming functional, effective, and contributing members of an ATG implementation team. Built for both new and experienced ATG developers alike, the collaborative nature of this program and its exercises, have proven to be highly effective and extremely valuable in learning the best practices for implementing ATG solutions. Though not required, this bootcamp provides a structured path to earning a Certified Oracle ATG Web Commerce 10 Specialization! What Is Covered: This boot camp is for Application Developers and Software Architects wanting to gain valuable insight into ATG application development best practices, as well as relevant and applicable implementation experience on projects modeled after four of the most common types of applications built on the ATG platform. The following learning objectives are all critical, and are of equal priority in enabling this role to succeed. This learning boot camp will help with: Building a basic functional transaction-ready ATG Web Commerce 10 Application. Utilizing ATG’s platform features such as scenarios, slots, targeters, user profiles and segments, to create a personalized user experience. Building Nucleus components to support and/or extend application functionality. Understanding the intricacies of ATG order checkout and fulfillment. Specifying, designing and implementing new commerce features in ATG 10. Building a functional commerce application modeled after four of the most common types of applications built on the ATG platform, within an agile-based project team environment and under simulated real-world project conditions. Duration: The Oracle ATG Web Commerce 10 Implementation Developer Boot Camp is an instructor-led workshop spanning 10 days. Audience: Application Developers Software Architects Prerequisite Training and Environment Requirements: Programming and Markup Experience with Java J2EE, JavaScript, XML, HTML and CSS Completion of Oracle ATG Web Commerce 10 Implementation Specialist Development Guided Learning Path modules Participants will be required to bring their own laptop that meets the minimum specifications:   64-bit PC and OS (e.g. Windows 7 64-bit) 4GB RAM or more 40GB Hard Disk Space Laptops will require access to the Internet through Remote Desktop via Windows. Agenda Topics: Week 1 – Day 1 through 5 Build a Basic Commerce Application In week one of the boot camp training, we will apply knowledge learned from the ATG Web Commerce 10 Implementation Developer Guided Learning Path modules, towards building a basic transaction-ready commerce application. There will be little to no lectures delivered in this boot camp, as developers will be fully engaged in ATG Application Development activities and best practices. Developers will work independently on the following lab assignments from day's 1 through 5: Lab Assignments  1 Environment Setup 2 Build a dynamic Home Page 3 Site Authentication 4 Build Customer Registration 5 Display Top Level Categories 6 Display Product Sub-Categories 7 Display Product List Page 8 Display Product Detail Page 9 ATG Inventory 10 Build “Add to Cart” Functionality 11 Build Shopping Cart 12 Build Checkout Page  13 Build Checkout Review Page 14 Create an Order and Build Order Confirmation Page 15 Implement Slots and Targeters for Personalization 16 Implement Pricing and Promotions 17 Order Fulfillment Back to top Week 2 – Day 6 through 10 Team-based Case Project In the second week of the boot camp training, participants will be asked to join a project team that will select a case project for the team to implement. Teams will be able to choose from four of the most common application types developed and deployed on the ATG platform. They are as follows: Hard goods with physical fulfillment, Soft goods with electronic fulfillment, a Service or subscription case example, a Course/Event registration case example. Team projects will have approximately 160 hours of use cases/stories for each team to build (40 hours per developer). Each day's Use Cases/Stories will build upon the prior day's work, and therefore must be fully completed at the end of each day. Please note that this boot camp intends to simulate real-world project conditions, and as such will likely require the need for project teams to possibly work beyond normal business hours. To promote further collaboration and group learning, each team will be asked to present their work and share the methodologies and solutions that they've applied to their cases at the end of each day. Location: Oracle Reading CVC TPC510 Room: Wraysbury Reading, UK 9:00 AM – 5:00 PM  Registration Fee (10 Days): US $3,375 Please click on the following link to REGISTER or  visit the Oracle ATG Web Commerce 10 Implementation Developer Boot Camp page for more information. Questions: Patrick Ty Partner Enablement, Oracle Commerce Phone: 310.343.7687 Mobile: 310.633.1013 Email: [email protected]

  Read the article

• Issue 15: SVP Focus

  - by rituchhibber

       SVP FOCUS FOCUS -- Chris Baker SVP Oracle Worldwide ISV-OEM-Java Sales Chris Baker is the Global Head of ISV/OEM Sales responsible for working with ISV/OEM partners to maximise Oracle's business through those partners, whilst maximising those partners’ business to their end users. Chris works with partners, customers, innovators, investors and employees to develop innovative business solutions using Oracle products, services and skills. RESOURCES -- Oracle PartnerNetwork (OPN) OPN Solutions Catalog Oracle Exastack Program Oracle Exastack Optimized Oracle Cloud Computing Oracle Engineered Systems Oracle and Java SUBSCRIBE FEEDBACK PREVIOUS ISSUES "By taking part in marketing activities, our partners accelerate their sales cycles." -- Firstly, could you please explain Oracle's current strategy for ISV partners, globally and in EMEA? Oracle customers use independent software vendor (ISV) applications to run their businesses. They use them to generate revenue and to fulfil obligations to their own customers. Our strategy is very straight-forward. We want all of our ISV partners and OEMs to concentrate on the things that they do the best—building applications to meet the unique industry and functional requirements of their customer. We want to ensure that we deliver a best-in-class application platform so ISVs are free to concentrate their effort on their application functionality and user experience We invest over four billion dollars in research and development every year, and we want our ISVs to benefit from all of that investment in operating systems, virtualisation, databases, middleware, engineered systems, and other hardware. By doing this, we help them to reduce their costs, gain more consistency and agility for quicker implementations, and also rapidly differentiate themselves from other application vendors. It's all about simplification because we believe that around 25 to 30 percent of the development costs incurred by many ISVs are caused by customising infrastructure and have nothing to do with their applications. Our strategy is to enable our ISV partners to standardise their application platform using engineered architecture, so they can write once to the Oracle stack and deploy seamlessly in the cloud, on-premise, or in hybrid deployments. It's really important that architecture is the same in order to keep cost and time overheads at a minimum, so we provide standardisation and an environment that enables our ISVs to concentrate on the core business that makes them the most money and brings them success. How do you believe this strategy is helping the ISVs to work hand-in-hand with Oracle to ensure that end customers get the industry-leading solutions that they need? We work with our ISVs not just to help them be successful, but also to help them market themselves. We have something called the 'Oracle Exastack Ready Program', which enables ISVs to publicise themselves as 'Ready' to run the core software platforms that run on Oracle's engineered systems including Exadata and Exalogic. So, for example, they can become 'Database Ready' which means that they use the latest version of Oracle Database and therefore can run their application without modification on Exadata or the Oracle Database Appliance. Alternatively, they can become WebLogic Ready, Oracle Linux Ready and Oracle Solaris Ready which means they run on the latest release and therefore can run their application, with no new porting work, on Oracle Exalogic. Those 'Ready' logos are important in helping ISVs advertise to their customers that they are using the latest technologies which have been fully tested. We now also have Exadata Ready and Exalogic Ready programmes which allow ISVs to promote the certification of their applications on these platforms. This highlights these partners to Oracle customers as having solutions that run fluently on the Oracle Exadata Database Machine, the Oracle Exalogic Elastic Cloud or one of our other engineered systems. This makes it easy for customers to identify solutions and provides ISVs with an avenue to connect with Oracle customers who are rapidly adopting engineered systems. We have also taken this programme to the next level in the shape of 'Oracle Exastack Optimized' for partners whose applications run best on the Oracle stack and have invested the time to fully optimise application performance. We ensure that Exastack Optimized partner status is promoted and supported by press releases, and we help our ISVs go to market and differentiate themselves through the use of our technology and the standardisation it delivers. To date we have had several hundred organisations successfully work through our Exastack Optimized programme. How does Oracle's strategy of offering pre-integrated open platform software and hardware allow ISVs to bring their products to market more quickly? One of the problems for many ISVs is that they have to think very carefully about the technology on which their solutions will be deployed, particularly in the cloud or hosted environments. They have to think hard about how they secure these environments, whether the concern is, for example, middleware, identity management, or securing personal data. If they don't use the technology that we build-in to our products to help them to fulfil these roles, they then have to build it themselves. This takes time, requires testing, and must be maintained. By taking advantage of our technology, partners will now know that they have a standard platform. They will know that they can confidently talk about implementation being the same every time they do it. Very large ISV applications could once take a year or two to be implemented at an on-premise environment. But it wasn't just the configuration of the application that took the time, it was actually the infrastructure - the different hardware configurations, operating systems and configurations of databases and middleware. Now we strongly believe that it's all about standardisation and repeatability. It's about making sure that our partners can do it once and are then able to roll it out many different times using standard componentry. What actions would you recommend for existing ISV partners that are looking to do more business with Oracle and its customer base, not only to maximise benefits, but also to maximise partner relationships? My team, around the world and in the EMEA region, is available and ready to talk to any of our ISVs and to explore the possibilities together. We run programmes like 'Excite' and 'Insight' to help us to understand how we can help ISVs with architecture and widen their environments. But we also want to work with, and look at, new opportunities - for example, the Machine-to-Machine (M2M) market or 'The Internet of Things'. Over the next few years, many millions, indeed billions of devices will be collecting massive amounts of data and communicating it back to the central systems where ISVs will be running their applications. The only way that our partners will be able to provide a single vendor 'end-to-end' solution is to use Oracle integrated systems at the back end and Java on the 'smart' devices collecting the data—a complete solution from device to data centre. So there are huge opportunities to work closely with our ISVs, using Oracle's complete M2M platform, to provide the infrastructure that enables them to extract maximum value from the data collected. If any partners don't know where to start or who to contact, then they can contact me directly at [email protected] or indeed any of our teams across the EMEA region. We want to work with ISVs to help them to be as successful as they possibly can through simplification and speed to market, and we also want all of the top ISVs in the world based on Oracle. What opportunities are immediately opened to new ISV partners joining the OPN? As you know OPN is very, very important. New members will discover a huge amount of content that instantly becomes accessible to them. They can access a wealth of no-cost training and enablement materials to build their expertise in Oracle technology. They can download Oracle software and use it for development projects. They can help themselves become more competent by becoming part of a true community and uncovering new opportunities by working with Oracle and their peers in the Oracle Partner Network. As well as publishing massive amounts of information on OPN, we also hold our global Oracle OpenWorld event, at which partners play a huge role. This takes place at the end of September and the beginning of October in San Francisco. Attending ISV partners have an unrivalled opportunity to contribute to elements such as the OpenWorld / OPN Exchange, at which they can talk to other partners and really begin thinking about how they can move their businesses on and play key roles in a very large ecosystem which revolves around technology and standardisation. Finally, are there any other messages that you would like to share with the Oracle ISV community? The crucial message that I always like to reinforce is architecture, architecture and architecture! The key opportunities that ISVs have today revolve around standardising their architectures so that they can confidently think: "I will I be able to do exactly the same thing whenever a customer is looking to deploy on-premise, hosted or in the cloud". The right architecture is critical to being competitive and to really start changing the game. We want to help our ISV partners to do just that; to establish standard architecture and to seize the opportunities it opens up for them. New market opportunities like M2M are enormous - just look at how many devices are all around you right now. We can help our partners to interface with these devices more effectively while thinking about their entire ecosystem, rather than just the piece that they have traditionally focused upon. With standardised architecture, we can help people dramatically improve their speed, reach, agility and delivery of enhanced customer satisfaction and value all the way from the Java side to their centralised systems. All Oracle ISV partners must take advantage of these opportunities, which is why Oracle will continue to invest in and support them. Oracle OpenWorld 2010 Whether you attended Oracle OpenWorld 2009 or not, don't forget to save the date now for Oracle OpenWorld 2010. The event will be held a little earlier next year, from 19th-23rd September, so please don't miss out. With thousands of sessions and hundreds of exhibits and demos already lined up, there's no better place to learn how to optimise your existing systems, get an inside line on upcoming technology breakthroughs, and meet with your partner peers, Oracle strategists and even the developers responsible for the products and services that help you get better results for your end customers. Register Now for Oracle OpenWorld 2010! Perhaps you are interested in learning more about Oracle OpenWorld 2010, but don't wish to register at this time? Great! Please just enter your contact information here and we will contact you at a later date. How to Exhibit at Oracle OpenWorld 2010 Sponsorship Opportunities at Oracle OpenWorld 2010 Advertising Opportunities at Oracle OpenWorld 2010 -- Back to the welcome page

  Read the article

• The Java Specialist: An Interview with Java Champion Heinz Kabutz

  - by Janice J. Heiss

  Dr. Heinz Kabutz is well known for his Java Specialists’ Newsletter, initiated in November 2000, where he displays his acute grasp of the intricacies of the Java platform for an estimated 70,000 readers; for his work as a consultant; and for his workshops and trainings at his home on the Island of Crete where he has lived since 2006 -- where he is known to curl up on the beach with his laptop to hack away, in between dips in the Mediterranean. Kabutz was born of German parents and raised in Cape Town, South Africa, where he developed a love of programming in junior high school through his explorations on a ZX Spectrum computer. He received a B.S. from the University of Cape Town, and at 25, a Ph.D., both in computer science. He will be leading a two-hour hands-on lab session, HOL6500 – “Finding and Solving Java Deadlocks,” at this year’s JavaOne that will explore what causes deadlocks and how to solve them. Q: Tell us about your JavaOne plans.A: I am arriving on Sunday evening and have just one hands-on-lab to do on Monday morning. This is the first time that a non-Oracle team is doing a HOL at JavaOne under Oracle's stewardship and we are all a bit nervous about how it will turn out. Oracle has been immensely helpful in getting us set up. I have a great team helping me: Kirk Pepperdine, Dario Laverde, Benjamin Evans and Martijn Verburg from jClarity, Nathan Reynolds from Oracle, Henri Tremblay of OCTO Technology and Jeff Genender of Savoir Technologies. Monday will be hard work, but after that, I will hopefully get to network with fellow Java experts, attend interesting sessions and just enjoy San Francisco. Oh, and my kids have already given me a shopping list of things to get, like a GoPro Hero 2 dive housing for shooting those nice videos of Crete. (That's me at the beginning diving down.) Q: What sessions are you attending that we should know about?A: Sometimes the most unusual sessions are the best. I avoid the "big names". They often are spread too thin with all their sessions, which makes it difficult for them to deliver what I would consider deep content. I also avoid entertainers who might be good at presenting but who do not say that much.In 2010, I attended a session by Vladimir Yaroslavskiy where he talked about sorting. Although he struggled to speak English, what he had to say was spectacular. There was hardly anybody in the room, having not heard of Vladimir before. To me that was the highlight of 2010. Funnily enough, he was supposed to speak with Joshua Bloch, but if you remember, Google cancelled. If Bloch has been there, the room would have been packed to capacity.Q: Give us an update on the Java Specialists’ Newsletter.A: The Java Specialists' Newsletter continues being read by an elite audience around the world. The apostrophe in the name is significant.  It is a newsletter for Java specialists. When I started it twelve years ago, I was trying to find non-obvious things in Java to write about. Things that would be interesting to an advanced audience.As an April Fool's joke, I told my readers in Issue 44 that subscribing would remain free, but that they would have to pay US$5 to US$7 depending on their geographical location. I received quite a few angry emails from that one. I would have not earned that much from unsubscriptions. Most readers stay for a very long time.After Oracle bought Sun, the Java community held its breath for about two years whilst Oracle was figuring out what to do with Java. For a while, we were quite concerned that there was not much progress shown by Oracle. My newsletter still continued, but it was quite difficult finding new things to write about. We have probably about 70,000 readers, which is quite a small number for a Java publication. However, our readers are the top in the Java industry. So I don't mind having "only" 70000 readers, as long as they are the top 0.7%.Java concurrency is a very important topic that programmers think they should know about, but often neglect to fully understand. I continued writing about that and made some interesting discoveries. For example, in Issue 165, I showed how we can get thread starvation with the ReadWriteLock. This was a bug in Java 5, which was corrected in Java 6, but perhaps a bit too much. Whereas we could get starvation of writers in Java 5, in Java 6 we could now get starvation of readers. All of these interesting findings make their way into my courseware to help companies avoid these pitfalls.Another interesting discovery was how polymorphism works in the Server HotSpot compiler in Issue 157 and Issue 158. HotSpot can inline methods from interfaces that have only one implementation class in the JVM. When a new subclass is instantiated and called for the first time, the JVM will undo the previous optimization and re-optimize differently.Here is a little memory puzzle for your readers: public class JavaMemoryPuzzle {  private final int dataSize =      (int) (Runtime.getRuntime().maxMemory() * 0.6);  public void f() {    {      byte[] data = new byte[dataSize];    }    byte[] data2 = new byte[dataSize];  }  public static void main(String[] args) {    JavaMemoryPuzzle jmp = new JavaMemoryPuzzle();    jmp.f();  }}When you run this you will always get an OutOfMemoryError, even though the local variable data is no longer visible outside of the code block.So here comes the puzzle, that I'd like you to ponder a bit. If you very politely ask the VM to release memory, then you don't get an OutOfMemoryError: public class JavaMemoryPuzzlePolite {  private final int dataSize =      (int) (Runtime.getRuntime().maxMemory() * 0.6);  public void f() {    {      byte[] data = new byte[dataSize];    }    for(int i=0; i<10; i++) {      System.out.println("Please be so kind and release memory");    }    byte[] data2 = new byte[dataSize];  }  public static void main(String[] args) {    JavaMemoryPuzzlePolite jmp = new JavaMemoryPuzzlePolite();    jmp.f();    System.out.println("No OutOfMemoryError");  }}Why does this work? When I published this in my newsletter, I received over 400 emails from excited readers around the world, most of whom sent me the wrong explanation. After the 300th wrong answer, my replies became unfortunately a bit curt. Have a look at Issue 174 for a detailed explanation, but before you do, put on your thinking caps and try to figure it out yourself. Q: What do you think Java developers should know that they currently do not know?A: They should definitely get to know more about concurrency. It is a tough subject that most programmers try to avoid. Unfortunately we do come in contact with it. And when we do, we need to know how to protect ourselves and how to solve tricky system errors.Knowing your IDE is also useful. Most IDEs have a ton of shortcuts, which can make you a lot more productive in moving code around. Another thing that is useful is being able to read GC logs. Kirk Pepperdine has a great talk at JavaOne that I can recommend if you want to learn more. It's this: CON5405 – “Are Your Garbage Collection Logs Speaking to You?” Q: What are you looking forward to in Java 8?A: I'm quite excited about lambdas, though I must confess that I have not studied them in detail yet. Maurice Naftalin's Lambda FAQ is quite a good start to document what you can do with them. I'm looking forward to finding all the interesting bugs that we will now get due to lambdas obscuring what is really going on underneath, just like we had with generics.I am quite impressed with what the team at Oracle did with OpenJDK's performance. A lot of the benchmarks now run faster.Hopefully Java 8 will come with JSR 310, the Date and Time API. It still boggles my mind that such an important API has been left out in the cold for so long.What I am not looking forward to is losing perm space. Even though some systems run out of perm space, at least the problem is contained and they usually manage to work around it. In most cases, this is due to a memory leak in that region of memory. Once they bundle perm space with the old generation, I predict that memory leaks in perm space will be harder to find. More contracts for us, but also more pain for our customers. Originally published on blogs.oracle.com/javaone.

  Read the article

• The Java Specialist: An Interview with Java Champion Heinz Kabutz

  - by Janice J. Heiss

  Dr. Heinz Kabutz is well known for his Java Specialists’ Newsletter, initiated in November 2000, where he displays his acute grasp of the intricacies of the Java platform for an estimated 70,000 readers; for his work as a consultant; and for his workshops and trainings at his home on the Island of Crete where he has lived since 2006 -- where he is known to curl up on the beach with his laptop to hack away, in between dips in the Mediterranean. Kabutz was born of German parents and raised in Cape Town, South Africa, where he developed a love of programming in junior high school through his explorations on a ZX Spectrum computer. He received a B.S. from the University of Cape Town, and at 25, a Ph.D., both in computer science. He will be leading a two-hour hands-on lab session, HOL6500 – “Finding and Solving Java Deadlocks,” at this year’s JavaOne that will explore what causes deadlocks and how to solve them. Q: Tell us about your JavaOne plans.A: I am arriving on Sunday evening and have just one hands-on-lab to do on Monday morning. This is the first time that a non-Oracle team is doing a HOL at JavaOne under Oracle's stewardship and we are all a bit nervous about how it will turn out. Oracle has been immensely helpful in getting us set up. I have a great team helping me: Kirk Pepperdine, Dario Laverde, Benjamin Evans and Martijn Verburg from jClarity, Nathan Reynolds from Oracle, Henri Tremblay of OCTO Technology and Jeff Genender of Savoir Technologies. Monday will be hard work, but after that, I will hopefully get to network with fellow Java experts, attend interesting sessions and just enjoy San Francisco. Oh, and my kids have already given me a shopping list of things to get, like a GoPro Hero 2 dive housing for shooting those nice videos of Crete. (That's me at the beginning diving down.) Q: What sessions are you attending that we should know about?A: Sometimes the most unusual sessions are the best. I avoid the "big names". They often are spread too thin with all their sessions, which makes it difficult for them to deliver what I would consider deep content. I also avoid entertainers who might be good at presenting but who do not say that much.In 2010, I attended a session by Vladimir Yaroslavskiy where he talked about sorting. Although he struggled to speak English, what he had to say was spectacular. There was hardly anybody in the room, having not heard of Vladimir before. To me that was the highlight of 2010. Funnily enough, he was supposed to speak with Joshua Bloch, but if you remember, Google cancelled. If Bloch has been there, the room would have been packed to capacity.Q: Give us an update on the Java Specialists’ Newsletter.A: The Java Specialists' Newsletter continues being read by an elite audience around the world. The apostrophe in the name is significant.  It is a newsletter for Java specialists. When I started it twelve years ago, I was trying to find non-obvious things in Java to write about. Things that would be interesting to an advanced audience.As an April Fool's joke, I told my readers in Issue 44 that subscribing would remain free, but that they would have to pay US$5 to US$7 depending on their geographical location. I received quite a few angry emails from that one. I would have not earned that much from unsubscriptions. Most readers stay for a very long time.After Oracle bought Sun, the Java community held its breath for about two years whilst Oracle was figuring out what to do with Java. For a while, we were quite concerned that there was not much progress shown by Oracle. My newsletter still continued, but it was quite difficult finding new things to write about. We have probably about 70,000 readers, which is quite a small number for a Java publication. However, our readers are the top in the Java industry. So I don't mind having "only" 70000 readers, as long as they are the top 0.7%.Java concurrency is a very important topic that programmers think they should know about, but often neglect to fully understand. I continued writing about that and made some interesting discoveries. For example, in Issue 165, I showed how we can get thread starvation with the ReadWriteLock. This was a bug in Java 5, which was corrected in Java 6, but perhaps a bit too much. Whereas we could get starvation of writers in Java 5, in Java 6 we could now get starvation of readers. All of these interesting findings make their way into my courseware to help companies avoid these pitfalls.Another interesting discovery was how polymorphism works in the Server HotSpot compiler in Issue 157 and Issue 158. HotSpot can inline methods from interfaces that have only one implementation class in the JVM. When a new subclass is instantiated and called for the first time, the JVM will undo the previous optimization and re-optimize differently.Here is a little memory puzzle for your readers: public class JavaMemoryPuzzle {  private final int dataSize =      (int) (Runtime.getRuntime().maxMemory() * 0.6);  public void f() {    {      byte[] data = new byte[dataSize];    }    byte[] data2 = new byte[dataSize];  }  public static void main(String[] args) {    JavaMemoryPuzzle jmp = new JavaMemoryPuzzle();    jmp.f();  }}When you run this you will always get an OutOfMemoryError, even though the local variable data is no longer visible outside of the code block.So here comes the puzzle, that I'd like you to ponder a bit. If you very politely ask the VM to release memory, then you don't get an OutOfMemoryError: public class JavaMemoryPuzzlePolite {  private final int dataSize =      (int) (Runtime.getRuntime().maxMemory() * 0.6);  public void f() {    {      byte[] data = new byte[dataSize];    }    for(int i=0; i<10; i++) {      System.out.println("Please be so kind and release memory");    }    byte[] data2 = new byte[dataSize];  }  public static void main(String[] args) {    JavaMemoryPuzzlePolite jmp = new JavaMemoryPuzzlePolite();    jmp.f();    System.out.println("No OutOfMemoryError");  }}Why does this work? When I published this in my newsletter, I received over 400 emails from excited readers around the world, most of whom sent me the wrong explanation. After the 300th wrong answer, my replies became unfortunately a bit curt. Have a look at Issue 174 for a detailed explanation, but before you do, put on your thinking caps and try to figure it out yourself. Q: What do you think Java developers should know that they currently do not know?A: They should definitely get to know more about concurrency. It is a tough subject that most programmers try to avoid. Unfortunately we do come in contact with it. And when we do, we need to know how to protect ourselves and how to solve tricky system errors.Knowing your IDE is also useful. Most IDEs have a ton of shortcuts, which can make you a lot more productive in moving code around. Another thing that is useful is being able to read GC logs. Kirk Pepperdine has a great talk at JavaOne that I can recommend if you want to learn more. It's this: CON5405 – “Are Your Garbage Collection Logs Speaking to You?” Q: What are you looking forward to in Java 8?A: I'm quite excited about lambdas, though I must confess that I have not studied them in detail yet. Maurice Naftalin's Lambda FAQ is quite a good start to document what you can do with them. I'm looking forward to finding all the interesting bugs that we will now get due to lambdas obscuring what is really going on underneath, just like we had with generics.I am quite impressed with what the team at Oracle did with OpenJDK's performance. A lot of the benchmarks now run faster.Hopefully Java 8 will come with JSR 310, the Date and Time API. It still boggles my mind that such an important API has been left out in the cold for so long.What I am not looking forward to is losing perm space. Even though some systems run out of perm space, at least the problem is contained and they usually manage to work around it. In most cases, this is due to a memory leak in that region of memory. Once they bundle perm space with the old generation, I predict that memory leaks in perm space will be harder to find. More contracts for us, but also more pain for our customers.

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >