Search Results

Search found 20049 results on 802 pages for 'virtual drive'.

Page 275/802 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• RDP or SSH connection trough Windows 2008 server VPN hang after a while

  - by xt4fs

  I have been experiencing a very strange issue with our VPN setup on Windows Server 2008. That server is running as a Xen Virtual Machine. We use it for two purposes, permit our mobile workers to connect to another server hosted somewhere else that only allow that ip, and use it to RDP or ssh to many other virtual machine on the same server. The server has no performance issue and still a load of memory free. All other virtual machine has no problem whatsoever. Many of those virtual machine have public IP (web servers) and all their firewall are set to allow only ssh connection or RDP connection from their local interface. When I am connecting directly with either ssh or RDP to one of the other virtual machine everything run without any issues. However, when I am doing so through the VPN after some time the connection just hang, it usually continue after some time (5 or 10 minutes). It seems as more there is network usage more often it happen to a point where it is completely unusable. The worst thing I can do to hang it faster is to actually ping the vpn client IP from the local network, after some time the latency increase until it hang. This happen even if I do RDP to the local ip of the VPN server trough the VPN. The server report no problem and if I disconnect to the vpn and reconnect right away everything is alright. There is nothing wrong in the VPN server log. I have taught at the beginning that it could have been an issue with the Host server so I try to RDP,ssh directly to the guest and I have experience no issue while doing this, so it really seems to be a problem with the VPN server on Windows server 2008. Another very weird thing is it does not seems to be of any issue if you only do Internet (NAT) without trying to connect to any local ips.

  Read the article

• Change dead disk in DPM 2010

  - by Dragouf

  I was backuping data on an 1Gb hard drive with DPM 2010. This disk died but I replace it with another 1Gb hard drive. But I don't find how to recreate data structure on this new drive from previous protection group. Protection group were red. I delete the disk in "administration disks", now protection group are green but they don't save data and I don't see any menu to change the disk destination. how to do ? thanks

  Read the article

• Unable to boot from SATA II and vista

  - by pencilslate

  Trying to use a SATA II hard drive on toshiba satellite notebook. The hard drive has vista installed on it from another notebook. After inserting the hard drive, the boot starts.. shows "Microsoft windows" the progress bar, and reboots, in a loop. The existing hard drive is SATA with xp on it. The replacement one is SATA II with vista on it. I wanna troubleshoot. But, don't know where to start. Any help is much appreciated!!

  Read the article

• vmware problems

  - by AO

  I renamed some of my virtual machine files and never did a backup before doing so. Now I can't get the machine to start again as it asks for the old files. I have updated references to these files in the project setting files which are in plain text. The virtual machine keeps on asking for the files anyway. I never shut off the machine properly before starting to rename the files. How can I save my work done on the virtual machine disk? I have tried to create a new machine and adding the disk from the old virtual machine only but there seems to be dependencies between disk files. The parent drive cannot be found I am told when trying to add the drive of interest. Any suggestion on how to resolve the issue?

  Read the article

• How to burn a data DVD in Windows XP

  - by SabreWolfy

  I am trying to burn a data DVD (DVD+R) in Windows XP SP3 on a Dell desktop computer. The computer has a licensed copy of Nero 6.3. Nero indicates that an update to version 6.6 is available, but after following the link provided, it redirects me to the Nero website to purchase the upgrade. I'm not interested in doing this. After creating a project in Nero 6.3, inserting a blank DVD+R and trying to start burning the data DVD, Nero indicates that I should insert an appropriate disk into the drive. It does not seem to detect the blank DVD+R. I downloaded infrarecorder and cdrtfe from Sourceforge. Neither of these programs worked either. They both indicated that I should insert the correct media, with cdrtfe saying there is no disk in the drive. I tried with another blank DVD +R with the same effect. I inserted a CDR containing data into the drive and the Windows read read this CDR without a problem. I have no reason to believe that the drive is faulty. I am aware that Windows XP itself is not able to burn DVDs. However, it seems that three third-party software programs are not able to burn a data DVD in Window XP. The specifications provided in Nero indicate that DVD+R is compatible with the drive. How can I burn a backup data DVD in Windows XP?

  Read the article

• How is made sure magnetic or electric fields from devices like transformers or fans close nearby do

  - by matnagel

  Fans and transformers which are inside the server case create magnetic and electric fields. Electric fields can be easily shielded, but what about magnetic fields, they can only be shielded with high cost materials like mu metal http://en.wikipedia.org/wiki/Mu-metal If a hard drive is installed too close to an intense transformer field, how is the magnetically stored information on the ferromagnetic surfaces of the disk kept safe? Even if drives are shielded, where are the limits? Is there some technical investigation or recommendation from manufacturers about this? (I never heard about something and never had any problem but I am interested in some facts. This is much preferred over what you believe or a habit you developed. Please try to give some solid infromation.) I have built and repaired many servers and sometimes I did put the harddrive on top of the power supply. Edit: This question is not about frequencies that could affect the drive via the power or data connectors of the drive, those are electronically decoupled and that's another question. Edit 2: The wikipedia page states that the motor inside the drive is shielded with mu metal. It is obvious that manufactureres have to take care of this. This question is about such influences from outside the drive.

  Read the article

• Restoring Box Sync (box.com) using physical media after OS reinstall

  - by sjrm

  I have my Box Folder on a different drive ( D: ) than my Operating System Drive ( C: ) I follow these instructions to set the local folder on the second drive. https://support.box.com/hc/en-us/articles/200852947-How-Can-I-Change-the-Default-Folder-Location-for-Box-Sync- I had to format and reinstall Windows 7, leaving the other drive (D: ) untouched. now i reinstalled Box Sync, and directed it to the same location where i already have all my files. However, Box Sync renamed the folder to (Box ([email protected]) ) as a bckup, and is downloading everything again. As i have like 30Gb of files, and it takes many hour to download them, i just want to use the files that i already have in my local disk. i tried copying all files again to the new local Box Folder, but files started to get duplicated. Is there any way to avoid downloading everything again each time i reinstall my OS ? Thanks

  Read the article

• What does the fan speed sensor really report?

  - by T. Verron

  I have an overheating issue on my netbook (ASUS EeePC 1015PW), which I'm trying to troubleshoot. Using lm-sensors while overheating gave me this output : acpitz-virtual-0 Adapter: Virtual device temp1: +86.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4089 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +82.0°C (crit = +100.0°C) Core 1: +80.0°C (crit = +100.0°C) But I can't hear the fan. So I enabled manual pwm controling and set the fan to full speed, and after a few minutes I got this output : acpitz-virtual-0 Adapter: Virtual device temp1: +65.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4016 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +62.0°C (crit = +100.0°C) Core 1: +58.0°C (crit = +100.0°C) And this time I could hear the fan spinning. So there's quite obviously an issue with either fan control or fan monitoring. Hence the question : what kind of physical information does the fan sensor really report? Thank you PS. I should have added that the computer is a small, hard-to-disassemble netbook, so I can't and don't want to try experiments like "block the fan and see what the sensor reports".

  Read the article

• squid cache disk configuration

  - by Gogonez

  just wondering how far drive configuration will affect squid cache performance. what kind of drive configuration that fast enough for squid ? is it true that block-level parity strip raid faster than byte-level one ? is mirrored drive config will decrease squid cache write process ? how much swap space that squid realy need to store cache (reverse mode) for 200mb web doc ? what kind of benchmark should i do to analyze squid disk performance ?

  Read the article

• Set Folder Icon for all Os

  - by Am1rr3zA

  Hi, I want set icon to my folder in My external hard drive but when I change it (by right click on it and -> properties -> customize -> change icon (i address the icon from my extenal hard drive)) it just change in my windows and when plug my extenarnal-hard to another windows it's don't show my icon! how should fix this? P.S: is there a way to set icon for folder show in all os (linux, windows, OSX, ..) note: I don't want set icon to 1 drive I want set icon to all my folder in my drive.

  Read the article

• Stop Windows Automatic Update in boot menu or start up-sequence

  - by Andrew

  My girlfriend has a corrupted hard drive running Windows Vista. She is getting a new hard drive and has also purchased an external hard drive to back up her data. However windows downloaded an automatic updated and keeps getting held up and restarting when it trys to apply the update. Is there a way she can disable this from the boot menu or start-up sequence?

  Read the article

• how to access website hosted on iis of virutal machine

  - by user29402

  Hi, I have installed Windows server 2008 on the latest version of Sun Virtual box. I have some web sites hosted in the Windows Server virtual machine. How can I access the websites hosted on the virtual machine from the host machine. thanks in advance.

  Read the article

• How to recover zfs pool when root fs fails

  - by rage

  I have a FreeBSD 8.0 amd64 box w/ 1 ATA drive for system and 4 SATA drives as a RAIDZ pool. The ATA drive isn't mirrored nor part of any pool, but also doesn't hold any valuable data. How can I recover my zpool if this ATA drive fails for any reason, but assume my RAIDZ vdev SATA drives remain intact? Should I also use at least a mirror configuration for that?

  Read the article

• Logon Failure: the target account name is incorrect after making a ghost image of a server

  - by cop1152

  I recently replaced a failing SCSI drive in a Windows 2000 server with an IDE drive. I made an image of the SCSI drive and Ghosted it. The purpose of the machine was to give out DHCP at one location and host a couple of files. When I restarted the machine with the new drive, DHCP appears to be working fine, but I cannot get to any of the shares. Instead, I get the following message when attempting to navigate using Explorer. Logon Failure: the target account name is incorrect It appears that this machine is not communicating with the main domain controller. Changes to user accounts (performed on the domain controller) are not replicated on this machine.

  Read the article

• How can I connect to my Airport Extreme Shared Disk using Windows?

  - by matt ryan

  I have a shared disk attached to my Airport Extreme, which I can connect to remotely in OS X through the finder via command - k, and entering in the proper address: afp://test.dyndns.org:1111 1111 being the port I've reserved for the disk in the AE port mapping. This is such a great feature, but I don't always have access to a Mac. My question is how can I connect to this drive via Windows XP? Please note, that the shared drive is a Drobo FS and formatted to handle both Windows and Mac OS. I've tried mapping a network drive via My Computer - Tools - Map Network Drive and entering: \\test.dyndns.org:1111\Drobo-Name I've also tried Start - Run and entering the same, both with and without the port #.

  Read the article

• Sony VGN-NR260E "External Device Boot"

  - by user72158

  [A LITTLE BACKGROUND] On all modern Dell computers pushing the F12 on bios boot will allow for a screen that lets you choose what boot option you need. For example if I want to boot off of a USB flash drive to boot into a live Linux distribution in order to clean virus's on netbooks that do not have CD drives to boot from I would push F12 and choose USB device from the list of options. If this does not show up then I can always go to the F2 bios setup and choose flash drive to be the first option. When I restart the computer it will boot into the flash device. I understand that I can purchase an external USB CD drive and then boot from that. I do not want to use that option. The reason for using a flash device instead of a CD is: A: This USB flash device has several different boot OS's on it that are used. B: The antivirus disks are updated often and burning cd's and throwing away others is wasteful compared to simply updating a flash drive. There is nothing wrong with the flash drive. It works perfect on many other PC's. [PROBLEM] Booting this flashdrive has been working for years on hundreds of computers... I just have this ONE computer that I cannot figure out how to get it to boot on... I have a Sony Vaio that will not boot to this device. I've tried pushing every key combo I can think of (F12, Esc, Del, F10...) and none of these key combinations will bring up the boot menu. I chose F2 and went into the bios and changed the first boot device to USB flash device. This did not work either. There is an astrix next to the device and the note states: "This Drive is available when External Device Boot is Enable." [WHAT I NEED] I need to know How to enable External Device Boot on the Sony Vaio VGN-NR260E laptop. OR How to bring up the Boot Menu to allow me to boot off a flash device. Thanks for anyone that can help!

  Read the article

• Why does a Windows 7 installation grow so seriously and how to shring it?

  - by Ivan

  I store all my data and the most of applications (those legally available in "portable" versions) on drive D: and only use drive C: for the Windows system and some heavily integrated applications like MS Office, Visual Studio, Adobe Reader, Flash Player etc. When I was using Windows XP, 50 GiB drive C: was more than enough. Now, as I've mitigated to Windows 7, it hardly is. Yesterday as I've checked, 7 GiBs were free on drive C:. Then I've installed fresh Windows updates (which were just some tens of MiBs to download) and checked again: now there are only 2 GiBs free. Where have 5 GiBs gone? PS: Don't be surprised my system installation takes actually that much: I've got Visual Studio and SQL Server with complete offline documentation library, but that doesn't explain where does free space disappear on simple Windows updates. PPS: I use an augmented CCleaner version to clean my PC every day, so there are for sure no temporary internet files of recycle bin trash files taking the place.

  Read the article

• How to determine if a file has been backed up?

  - by Console

  I try to consolidate old drives to new ones of larger capacity. Sometimes files have been renamed, but are otherwise identical. Sometimes an old directory has just a few more files in it than a newer directory with the same name. Sometimes a file has the same name but the size differs. So I often find myself asking the question: Are there any files on this old drive or directory that I haven't already copied to the new drive? I just want to know that I have the files, I don't want to try and sync stuff automatically (Syncing tools tend to just sync, creating duplicate folder structures and other problems, so I prefer to do it by hand). Basically, if an old drive has a file called "foo.bar" ten directories deep, and my new big drive has an identical file called "oldstuff.zip" in the root, I just want a "yes you have it" or "no, unique files exist". Is there a free tool, a script or a quick and easy method (Mac/Unix or Windows) to get the answer?

  Read the article

• Nexenta under KVM?

  - by Nick

  I have an Ubuntu Server running KVM. I'd like to get the benefits of ZFS so I was thinking of installing a virtual machine under KVM running Nexenta (or NexentaStor), allowing that virtual machine to have raw access to a couple of physical hard disks, and then having it share its file system with NFS so that Ubuntu can access it. I've never tried setting up KVM so that the virtual machine has access to physical drives. Does this sound feasible, and is there anything I need to watch out for? Has someone already documented something like this? Does Nexenta/ZFS function basically as well in the virtual environment as if they were running base bones? I can take a small performance hit, but I don't want it to not be as reliable because of the virtualization. Thanks.

  Read the article

• Truecrypt in place decryption. Is this possible?

  - by Keyo

  I want to decrypt my entire partition and turn it back into standard NTFS. I encrypted a large partition on my 1TB drive before I took it through the airport. For this I used the in place method on truecrypt for win7. I'm on a mac now and there doesn't seem to be any way to decryppt the drive in place. It mounts fine, but I don't want to buy another drive just so I can shift files around. The drive is hooked up via USB. Would this be a problem?

  Read the article

• Dell XPS 710 - Boot Device Not Available

  - by WilliamKF

  Recently I was gifted a Dell XPS 710 tower running WinXP SP3. It was running fine until today when I restarted and received a blue screen and the error "unmountable boot volume". In order to fix this issue I've attempted to boot from the Windows XP CD and run chkdsk. However when I attempt to boot from the CD drive I get a "Boot Device not Available" error. Next I made a bootable USB flash drive, but receive the same error as the CD drive. The BIOS recognizes the CD and flash drives, and they appear in the boot device list, but neither will boot. I've attempted to resolve this by re-arranging the boot order in the BIOS and switching IDE channels/setting jumpers on the drives themselves, to no effect. I cannot move the hard drive to another machine because the XPS is the only one that supports SATA drives.

  Read the article

• Windows 7 just restarts, no BSOD, shows "Event ID 14 volsnap"

  - by Mdc007

  My Windows 7 just restarts without giving me a BSOD. When it reboots, it will hang sometimes and you have to let it rest. Sometimes it will print a message saying that Hal.dll is missing or corrupt. When it does restart I can't run a backup or a clone drive – it comes up with constant errors. I tried to run chkdsk – it says everything's clean. What is really puzzling is SyncToy on a different drive hangs half way through and won't run either. Machine: OCZ SSD Agility 2 for C drive SATA HDD for programs, documents on D drive MSI AMD 880 chipset Event viewer says something about critical power failure I/O operations and "Event ID 14 volsnap" – but that is just telling me the computer powered off which I already know.

  Read the article

• What you'd need to setup BBS?

  - by raspi

  What I need to setup BBS nowadays? I'm thinking of BBBS or PCBoard (no telnet! too new technology). What I've thinked so far, I'd need: virtual machine which runs DOS and hook that virtual COM-port to somekind of virtual VoIP modem software somehow (is there any?). How you can call to it across internet? Can you use HyperTerminal straight with that virtual/real modem? Or will VoIP just garble the modem data and nothing will work?

  Read the article

• script Disk Management configuration

  - by Joseph

  I have 10 workstations with large monitors that have USB slots and several card readers built in. The card readers cannot be disabled and will map to drive letters when I image the computers. I go into Disk Management and delete the drive mappings and add mappings to a single folder in C:\ with a folder for each slot. I have to do this because of scripts that run that are expecting specific letter drive mappings to network resources. Is there a way to script the deleting and adding of drive mappings instead of having to use the Disk Management GUI manually on each workstation? The workstations are running XP Professional.

  Read the article

• What is the best private cloud storage setup

  - by vdrmrt

  I need to create a private cloud and I'm searching for the best setup. These are my 2 most important requirements 1. Disk and system redundant 2. Price / GB as low as possible The system is going to be used as backup setup which will receive data 24/7 over SFTP and rsync. High throughput is not that important. I'm planning to use glusterfs and consumer grade 4TB hard-drives. I have worked out 3 possible setups 3 servers with 11 4TB HDD Setup up a replica 3 glusterfs and setup each hard drive as a separate ext4 brick. Total capacity: 44TB HDD / TB ratio of 0.75 (33HDD / 44TB) 2 servers with 11 4TB HDD The 11 hard-drives are combined in a RAIDZ3 ZFS storage pool. With a replica 2 gluster setup. Total capacity: 32TB (+ zfs compression) HDD / TB ratio of 0.68 (22HDD / 32TB) 3 servers with 11 4TB consumer hard-drives Setup up a replica 3 glusterfs and setup each hard-drive as a separate zfs storage pool and export each pool as a brick. Total capacity: 32TB (+ zfs compression) HDD / TB ratio of 0.68 (22HDD / 32TB) (Cheapest) My remarks and concerns: If a hard drive fails which setup will recover the quickest? In my opinion setup 1 and 3 because there only the contents of 1 hard-drive needs to be copied over the network. Instead of setup 2 were the hard-drive needs te be reconstructed by reading the parity of all the other harddrives in the system. Will a zfs pool on 1 harddrive give me extra protection against for example bit rot? With setup 1 and 3 I can loose 2 systems and still be up and running with setup 2 I can only loose 1 system. When I use ZFS I can enable compression which will give me some extra storage.

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >