Search Results

Search found 8783 results on 352 pages for 'laptop disaster'.

Page 276/352 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

• Best use of new express card on Windows

  - by jckdnk111

  I just bought a 48GB SSD express card for my laptop and I am trying to decide how best to use it. I will be running some sort of virtualization (prob VirtualBox) to test / learn Windows Server administration. I am running Windows 7 Ultimate 64 bit. I have 4GB of RAM and a 7200 RPM SATA hard disk. The express card will read at 115MB/s and write at 65MB/s. So how best to use this new disk? Readyboost, relocate pagefile, store VM disks, mix / match?

  Read the article

• Missing 16:10 resolutions with Nvidia drivers (Can't add resolutions)

  - by Wuinny

  I have a laptop with a Nvidia 9650M GT and used the drivers that Seven brought me. It works fine but Metro 2033 tells me that I have to upgrade my drivers to play the game. So I did it. But since I did a clean install of the new Nvidia drivers, I just have 1440*900 or 4:3 resolutions. I usually played with 1280*800 or 1184*740 (for performance issue) With the "old" drivers I was able to create custom resolution (1184*740) in Nvidia control panel but now when I try it tells me that "my monitor cannot support this resolution". When I insist, it works but soon as I shut down my computer I have to recreate it.. Do anyone have a fix?

  Read the article

• Slow performance with WAMP localhost access from other devices

  - by Adam

  I setup a localhost WAMP server and other device can access my localhost site on my win8 laptop with computer name instead of IP (bc I have use DCIP so that the wireless router can assign me IP otherwise it will not work). However, problem is that the website (WordPress), access speed is extremely slow on other devices other than my localhost computer, usually a 3s task take at least 10 seconds. (i.e. view my localhost site with computer name in a phone within the same wireless network.) Is that normal? What could be the reason causing it? Thank You

  Read the article

• No Sound on Debian

  - by danielson

  I've been dabbing around with LinuxMint Debian and i'm not getting any sound. Have removed Pulse = still no sound. Re-installed it, still no sound. Basically the only sound i get is when i perform the test with the Logitech headset. Otherwise, no sound anywhere. Have also tried an experimental version of LM Debian KDE but same story. Anyone else in a similar predicament? Here are my laptop's specs on Windows 7 .32bit : https://www.dropbox.com/s/7j0l0odzn07vq0o/Screenshot%20-%20System%20Info.jpg

  Read the article

• How to keep program always in memory (no swapping)

  - by Yossarian

  I'm using KeePass (on Windows 7) for storing passwords. The application is running on my laptop almost 100% of the time, but I'm using it rarely. The problem is, that activating the window after long time takes huge amount of time, I'd say that OS realized the application is no longer used and swapped it. I don't want OS to swap my KeePass (because of the loading lag, and also because of security - I don't like the idea of password keeping program's memory to be stored anywhere on HDD). Is there any possibility how to tell OS not to swap some program? Or, is this achievable by some programming?

  Read the article

• Photoshop changes colors when moved to a different monitor

  - by Jason

  This Yahoo! answers question pretty much sums up my predicament. Unfortunately I haven't really found an actual answer. Here's a screen shot of what happens when I place Photoshop between my monitors. Imagine that the left side of my laptop is the right square and the yellow is the right side of my monitor. When I move the program to one side fully or the other, it takes on the corresponding color. Obviously the color on the right is correct and Photoshop is changing the color of the image when it moves to my external monitor. Also notice how none of the tools or anything are different colors, just the actual image itself. How do I fix this? EDIT You may also notice that the color palette in the left corner is showing that yellow tinge. I didn't actually pick that yellow color, it's supposed to be showing the grey on the left that I used to fill in the square.

  Read the article

• Is it possible to re-create the Windows 8.1 install image after the upgrade

  - by rossmcm

  I have downloaded and installed the Windows 8.1 upgrade from the Windows store. The hardware was a 64-bit Toshiba P50 laptop. I need to upgrade a second P50 and wish to do so without another 3.6Gb download (I tried the instructions here but never got the chance to create the installation media, nor was I asked for a product key). I saw mention on superuser of creating USB rescue media after installation and using that to clone the upgrade onto another machine. Is this likely to be a viable option?

  Read the article

• Automatically copy files out of directory

  - by wizard

  I had a user's laptop stolen recently during shipping and it was setup with windows live sync. The thief or buyer's kids took some photos of themselves and they were synced to the user's my documents. I had just finished moving the users files out of the synced my documents folder when I noticed this. Later they took some more photos and a video. I wrote up a batch script to copy files out synced directory every 5 minutes into a dated directory. In the end I ended up with a lot of copies of the same few files. Ignoring what windows livesync offers (at the time there was no way to undelete files - I've moved onto dropbox so this ins't really an issue for me) what's the best way to preserve changes and files from a directory? I'm interested in windows solutions but if you know of a good way on a *nix please go ahead and share.

  Read the article

• Intel T5600 to upgrade T5250

  - by galets

  I want to upgrade my laptop which has T5250 CPU with a T5600 CPU to support virtualization. I ordered T5600 on ebay, but it didn't fit. It says T5250 supports PPGA478 socket, so I assume that is what I have. T5600 says supports "PBGA479, PPGA478". Since T5600 didn't fit as a replacement, I assume it means there are 2 models of T5600, one supports PBGA479, another one supports PPGA478, and not like I thought - one CPU supports both. Is that a correct statement? Does anybody know if it's even possible to do such an upgrade, or I'm wasting time?

  Read the article

• How to logon to a non-domain computer from one in a domain

  - by Svish

  I've met a rather annoying problem that should be very simple, but I can't seem to figure it out. I have a work laptop that is part of a domain, so my username is foobar\bob. I also have my home computer with no domain, just the username bob. I'm trying to connect to a share on my home computer from my work computer. It's asking me for my username and password, which is bob, but when I type in bob it assumes I mean foobar\bob, which of course doesn't work. I've tried to use hostname\bob, but that doesn't seem to work either... What can I do here? Both computers are running Windows 7.

  Read the article

• How can I unify my email, calendar and tasks (2 exchange accounts + 1 gmail)

  - by Assaf Stone

  This is my situation: I work as a consultant, and thus work out of multiple computers: my work-laptop a desktop at my primary client my desktop at home an android smartphone an android tablet Likewise, I have multiple accounts: A Microsoft Exchange (2010 AFAIK) account A Microsoft Exchange (2007 AFAIK) account A gmail account The most important thing I need is the ability to have events in one calendar affect the free / busy status of all other accounts (so that if I am busy on Monday 9am with an event from my employer's account, it will show that time as busy in my client's account, and in the gmail account. Second thing I need is a unified view of all of my accounts' info: Appointments, email, tasks, and contacts (in that order of importance). I've already tried outlook synchronization tools such as gSyncit, to sync both exchange accounts with gmail, but this creates a mess when updating appointments (deleted appointments sometimes return, timestamps revert). Is there perhaps some way to at least synchronize the free/busy state in a way that all of my calendar apps / accounts will look there to see if I can be invited? Just solving that would be well worth my while. Thanks, Assaf

  Read the article

• Windows 8 FN key doesn't work for brightness

  - by Airat Shigapov

  I have an Asus laptop with Windows 8 and fn+f5/fn+f6 keys (for brightness) doesn't work. In fact, they work, but they can increase/decrease the brightness only 1 time. I mean - after pressing fn+f5 once, nothing happens if I try to press fn+f5 again, before I press fn+f6. This only happens after logging in. At the login screen and during Windows boot I can adjust the brightness as I want, but after login I can't. I installed the latest ATK driver and NVIDIA graphics driver for Windows 8, and I think that my problem is related to conflict with drivers. I tried to reinstall/delete some drivers, but it didn't help. How can I detect where is the problem? Thanks.

  Read the article

• Is looking for Wi-Fi access points purely passive?

  - by Aric TenEyck

  Say I carry a Wi-Fi enabled phone or laptop through an area where there are WAPs. Assuming that I don't actively try to connect to them or otherwise interact with them, is it possible for the owner of that WAP to know that I was there? I'm asking this in the context of my earlier question: Looking for MACs on the network I was talking with a friend about my newfound ability to detect phones (and other devices with MAC addresses) on the network, and he pointed out that it might be useful to detect unknown phones on the network; I could use that data to track down anyone who was in my house and brought a Wi-Fi phone with them. So, if I set up a logging fake WAP with no security or encryption, can I glean any useful information about the devices that come into the house? Assuming that the thief doesn't actively try to connect...

  Read the article

• Is possible to load Windows 7 from the eSATA drive, even if it's not supported in BIOS?

  - by ClarityForce

  I'm using a laptop which has eSATA connection. I would like to install Windows 7 on the external disk (to have it completely separated from the OS on the internal hdd). According to the manufacturer, booting from eSATA drive won't be possible. I've checked the BIOS settings and it appears to be correct - eSATA is not even listed in the boot sequence. I'm wondering if there can be any workaround to that limitation, for example starting a custom bootloader on the USB pendrive, just to boot Windows 7 on the eSATA drive.

  Read the article

• Spoof MAC address in Windows 7: Bypass

  - by lpd

  I am trying to spoof the MAC address of my new Win7 laptop. To do so I tried specifying an alternate value from the Device Manager which took no effect. I also tried from the registry, as per other threads here, to no avail. Interestingly I also found the registry contained a path 000X\Ndi\params\NetworkAddress\default REG_SZ, but changing that had no effect either :( I can only guess I share the same issue here: http://forums.anandtech.com/showthread.php?t=2096480 as the wireless adaptor is the same brand bundled with the same operating system. So my question is - is there anything better I can do to achieve a spoofed physical address than rollback the drivers to some older version?

  Read the article

• iptables, allow access from certain MAC addresses

  - by user788171

  Presently, I limit which clients can access my server by using IP addresses via iptables, only approved IP addresses can connect. However, the problem with this is if a client is on a laptop and goes to a different location, they can no longer connect because the IP has changed. For a variety of reasons, iptables authentication is the only option I have. Is there a way to restrict access by device instead of ip address. For instance, only allow certain MAC address to connect to port 5000. Is it possible to do this via iptables? Note, the computers are not on the same network, they could be connecting from anywhere in the world.

  Read the article

• Odd Language In a BIOS Message

  - by Josh

  So I started up my laptop today and was greeted with the following message (not a direct quote): The type of the AC adapter cannot be determined. This may interfere with your computer's performance. Try unplugging the AC adapter and then plugging it back in, thanks. The problem was that I hadn't fully secured the plug into the back of the computer. However, I was a little taken aback when a message from BIOS said, "thanks." Is this normal? Any chance the message was illegitimate (virus)?

  Read the article

• Detach a filter driver from certain drivers?

  - by Protector one

  The driver for my laptop's keyboard has a kernel-mode filter driver from Synaptics (SynTP.sys) attached. Is it possible to detach the SynTP.sys filter driver from my keyboard's driver, without detaching it from my Touchpad's driver? This Microsoft Support page explains how to completely disable a filter driver, but my touchpad requires SynTP.sys as well. I'm trying to do this is because the Synaptics driver disables my touchpad when I type. (Explained fully in this question: Use touchpad while "typing"?.) Since I don't have a solution to that problem, I figured removing the filter driver from the keyboard could prevent the Synaptics driver from detecting key strokes, thus stopping it from disabling the touchpad.

  Read the article

• What's the most reliable (i.e. time-proof) solution for organizing photos?

  - by digitxp

  I pooled together my photos from an old external hard drive, various Picasa Web caches, flickr, flash drives, and an old computer. They're all on my external hard drive, using extremely creative labeling, like allpictures pixix pix2 images familyphotos and so on (hey, I was 7 when I organized them last). My computer's hard drive can die at any minute, and the external is new but who knows what that means? I am planning to start reorganizing these picture, probably by face or time. I have Bridge CS5, Picasa, etc., but which one is the most likely to not crash and burn like my Vista laptop did with a ZIP file filled with pictures of a funeral?

  Read the article

• Lan DNS not working after reinstall of Ubuntu 13.10

  - by DrorCohen

  I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

  Read the article

• Installing Chrome OS on HP Pavilion

  - by Lenny K

  Trying to install Chrome OS on HP Pavillion tx1000. I changed the BIOS to boot from USB before hard drive, and created a bootable USB drive (SanDisk Cruzer 4GB). No matter how many ways I try to make the USB drive, the laptop hangs on the startup screen, and trying to open the Boot Order Options freezes on "Fixed disk 0: ...". On the other hand, without the USB plugged in, the computer continues, and displays "Initialized Mouse", and then onto the Boot Order Options. If you let it boot normally from the beginning, it starts up fine into Windows Vista. I am using Hexxeh's Chrome OS build. Here are the different methods I've tried for making the Bootable USB Drive: Hexxeh's Image Creator (for Mac) Making the USB device bootable (using these directions). I wrote the image using Win32DiskImager. Writing the image using Win32DiskImager (without making it bootable).

  Read the article

• Decrypting a TrueCrypt drive pulled from another machine

  - by Blakeg08

  I work in a corporate environment and we are now required to encrypt laptops. I have already encrypted about 5 or 6 out of 40. I still have a few questions before we go all out with TrueCrypt. Can I decrypt a hard drive by plugging it into my desktop using a data transfer kit? I tried this and the hard drive showed up asking me to format before using the volume. If I have the TRD from each laptop backed up do I still need to backup the volume headers? What else do I need to back up? Thanks.

  Read the article

• Using TrueCrypt (software encryption) with an SSD

  - by Shackrock

  I use full drive encryption (FDE) w/ TrueCrypt on my laptop. I have a 2nd gen I7 with AES instruction support, so honestly I can't even notice a speed change on the system with it on. My question, is for those who know about SSD's a lot. I previously (early 2011) read articles about how software encryption will negate the speed benefits that an SSD provides - because of the need for the SSD to send a delete command, then a write command, for every encrypted write - instead of just writing over data like a regular HDD would (or something like this...honestly I can't remember...ha!). Anyway, any improvements in this field? Is it pointless for me to grab an SSD if I'm using FDE? Thanks all.

  Read the article

• Having internet on a VirtualBox

  - by S4M

  I am running a linux laptop and I set up a VirtualBox under windows XP. My only problem is the VirtualBox doesn't seem to be connected to internet - When I do the connection diagnosis it tells me there is no connection. I am using an NAT adapter, and I bind the port 80 from my computer to the port 80 of the VirtualBox, and same for the ports 8080, but still no result. I would be grateful is someone could help me to sort this out. EDIT: thinking of it, what is making the problem hard - and painful - is the absence of error message. If I try to use a given adapter to share my computer's connection with the VirtualBox, and it doesn't work, I have no way to know why. So, it would be really helpful if someone could share a way to access this king of information (is there a log file somewhere or a way to run VirtualBox from command line in a verbose mode?).

  Read the article

• Execute script before shutting down in Ubuntu

  - by juanefren

  When I shut down my computer I want to show some pending tasks that I have to do before leaving the office... I did a local application to manage those tasks, so basically I just want to run a command, and shut down after I kill the app executed. I have already tried with these options: * /etc/gdm/PostSession/Default -- this works only when I select LogOut option instead Shutdown. * /etc/rc0.d/K01mycustomscript -- execute script after X is killed * $HOME/.bash_logout -- This looks like does nothing. * ./app-to-run && sudo shutdown -h now -- Don't like it for 2 reasons, prompts for sudo password, and can't use my laptop shutdown button. I am using Ubuntu 10.04

  Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >