Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 277/1051 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

• Windows clients cannot access machine running DHCP server

  - by science9712

  I'm trying to setup a small LAN, using an Ethernet switch, an Arch Linux server, and around 10 Windows XP machines. This network has no outside connections. The Arch machine has a self configured ip address (configured with ip addr add 192.168.0.1 dev eth0), and acts as a DHCP server(using dhcpd). This portion works great, windows clients get IP addresses, the correct gateway settings, perfect. However, the clients cannot connect to each other, or to the dhcp server. When I run ping 192.168.0.1 on any client, I get no response, same happens if I try to ping any other client. On the gateway machine, I can't ping any of the clients either. Any help would be much appreciated!

  Read the article

• What are USB device resets?

  - by ILIV

  I have this brand-new software RAID-1 built with two WD Elements external USB drives, and I can see that Linux repeats the following message quite a bit: ... [302148.036912] usb 1-3.1: reset high-speed USB device number 19 using ehci_hcd [302153.052029] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302186.031481] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302217.050210] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302281.043543] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302312.090158] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302351.076851] usb 1-3.1: reset high-speed USB device number 19 using ehci_hcd ... So, what does it say? Is this normal? Is this a problem that I should try to fix?

  Read the article

• Invalid user names when creating a LDAP account

  - by h1d

  I'm trying to set up a system where a visitor can enter any user name in a form to create a new user and in the end it gets built on LDAP directory and I'm planning that to be mapped as a UNIX account as well (on Ubuntu Linux) by making the system look up for system accounts on the LDAP. Doing so is fine, but I feel that many user names should be avoided, one of the obvious being 'root' and all the other user names taken for daemons etc. How do you tackle at this problem? Do you make up a list of disallowed user names by checking /etc/passwd? I was thinking that if, internally, the user names could be prepended as 'ldap_' or something, it will avoid any naming conflicts but that seems hard when the LDAP entry name is 'joe' but the system account will look like 'ldap_joe'. Not even sure how that can be achieved.

  Read the article

• How to run long time process on Udev event?

  - by neclude

  (sorry for my bad english) I want run ppp connection when my usb modem is connect. so i use next udev rule: ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="16d8",\ RUN+="/usr/local/bin/newPPP.sh $env{DEVNAME}" (my modem appear in /dev as ttyACM0) newPPP.sh: #!/bin/bash /usr/bin/pon prov $1 >/dev/null 2>&1 & Problem: udev event fire, newPPP.sh running, BUT newPPP.sh process will be killed after ~4-5s. ppp not have time to connect. (in it params is timeout 10s for dial up). How can i run long time process, that will not be killed? (I was try nohup. It don't work too.) System: Arch Linux

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Windows 7/8 can't connect to an N Router

  - by xenoterracide

  I have a router running OpenWRT backfire, with N and A/B/G being broadcast. A linux laptop, and a Mac laptop can see the N network and connect to it (or at least they could last weekend). But there is now a Windows 7 Desktop with a B/G/N wireless card, and a Windows 8 Laptop with a B/G/N wireless card that can't see the N network only the B/G broadcast. The B/G and N have different SSID's and Encryption ( WEP and WPA2 PSK respectively ). The N SSID isn't even visible. Does anyone have any suggestions as to how to troubleshoot further? Or what might be the cause? update wireless info Desktop Dell Wireless 1502 802.11b/g/n Atheros Communications Inc 9.2.0.412

  Read the article

• writting becomes slow after few writes

  - by user1566277

  I am running an embedded Linux on arm with a SD-Card. While writing huge amounts of data I see bizarre effects. E.g, when I dd a 15 MB file few times, it writes the file (normally) in less than 2 Secs. But After lets say 3-4 times it takes sometimes 15 to 30 Seconds to write the same file. If I sync after writing the file, then this does not happen but sync takes long time too. If there is enough gap between writing two files than presumably kernel syncs itself. How can I optimize the whole performance so that write should always finish inside 2 Seconds. The File system I am using is ext3. Any pointers?

  Read the article

• How do I get the current date according to an NTP server without setting it locally?

  - by Zac B

  I want to get the current date and time according to a remote NTP server, using Linux. I don't want to change the local time as a result; I just want to get the remote date, adjusted for the local time zone, printed out. The date returned must comply with the following criteria: It needs to be reasonably accurate. It needs to be adjusted for the timezone on the local system making the request. It needs to be formatted in an easily-readable or interpretable way (standard date format, or seconds since epoch). What I've Tried: I can call ntpdate -q my.ntp.server and get the offset between the local time and the server's time, but that doesn't return the date according to the NTP server; it just returns the offset and the local date. Is there some easy way/command I can use to say: "Print out the date according to a given NTP server, adjusted for my current timezone"?

  Read the article

• who delete my files?

  - by akalter

  I have some linux server. on two of our server we have mysql. we have daily backup on both machine. but the script different. i saw both scripts. on one of them i saw the "delete older files" algorithm, but in the other this is happening but not from the script. i trying to know who dletes my files, because of that i want to use same script on both machine because of that in the script with the deletion i also copy the files to the another server, and i want to do that in both servers. Who have an idea who delete my older backups? Thank you!

  Read the article

• asymetric encryption of directory

  - by ftiaronsem

  Hello alltogether Currently I am wondering whether it is possible to apply asymetric encryption of a directory in Linux. I would like to achieve the following: Write log files to /var/log/secret Everything written to /var/log/secret is instantly encrypted by a public RSA key (or something similar) The encryption programms I know, i.e. ecryptfs do not support asymetric encryption of files, at least as far as I know. (Correct me if I am wrong). Therefore I am asking here whether you know of any possibility to implement this. Thanks in advance

  Read the article

• Cannot find grldr in all devices

  - by blockhead

  I'm running wubi on XP machine. Started out originally with 8.04, and gradually upgraded to 10.04. Recently, I was creating linux bootable USB drive, and put it in my system to see if it would work. After booting the LiveOS, and rebooting my machine, I know get the error Cannot find grldr in all devices when booting Ubuntu. I don't know what grldr is, but I assume it is the GRUB Loader. Did booting the LiveOS screw with my MBR perhaps? How can I fix this, and if not, is it possible to reinstall wubi, without losing anything of what I have now?

  Read the article

• Looking for an open source real-time network analysis program

  - by JrSysAdmin

  Can somebody recommend an open source real-time network analysis program? What I'm looking for the program to do is display a graph of bandwidth usage by IP within our internal network that can quickly be viewed any time we need to (typically when we want to quickly find out who is utilizing high amounts of bandwidth and slowing down the network). We ideally simply want to hook up a monitor on the wall of our server room to a system whose NIC will be in permissive mode to log all network activity in a visual manner which can easily be seen and running 24/7. Prefer open source as I do not have a budget for this project and prefer open source projects in general. I'd also prefer for this to be available for CentOS but any linux distro or Windows OS would be acceptable. Thanks!

  Read the article

• What lightweight solution can you recommend to stream MP3 files?

  - by ron

  Hi there, I need to stream MP3 files to a client running Flash. Streaming is the key here, no progressive downloads allowed. What free server can you recommend? I know Red5 but it seems a bit overkill for our needs (basic MP3 streaming). Anything more lightweight? Our Webserver runs Linux and Apache and we can install stuff there as long as it doesn't bog down the machine. Plus there is Perl and PHP although I don't think this will help for streaming, right? Thank you!

  Read the article

• What is shrink_slab, and why is it showing up in /var/log/messages?

  - by Steve Kehlet

  I'm investigating some application issues on a Linux system and noticed this around the time of the most recent problem, but not close enough to be definitively related: Jun 7 17:51:49 localhost kernel: shrink_slab: nr=-155456000 Jun 7 17:51:49 localhost kernel: shrink_slab: nr=-157859400 Jun 7 17:51:49 localhost kernel: shrink_slab: nr=-157833400 Jun 8 06:20:23 localhost kernel: shrink_slab: nr=-284172800 What is this? Googling isn't helping, I get that it's something with VM, but why is it suddenly showing up in /var/log/messages? Edit: I take it it's showing this because the number of pages it could free ("nr") is negative. Which is presumably a bad thing. I found patches for newer kernels that display a more useful message to this effect. Still not sure what this means though, or what I need to do about it.

  Read the article

• How to batch edit a list of files?

  - by user43144

  I have a list of files where I need to remove some lines that have been added yesterday by a spambot. The section I want to remove looks like this: ^M <script>[...] bunch of malware code [...]</script> That section seems to have been appended to the files, so I can be relatively sure it's the last lines of each file that contain this part. Now I know a bit of Linux, but not enough to do this via a command. How would I go about and do this?

  Read the article

• debian installation without internet connection

  - by Gobliins

  Hi i want to install some Debian distributions (Grip, Crush, Lenny...) for arm / armel architectures. www.emdebian.org/ i refer to this guide www.aurel32.net/info/debian_arm_qemu.php The Problem i have is that i dont have internet connection with My Linux VM or Qemu i am behind a Proxy. I want to know is there a way where i can dl all the needed files and save them to disk that i don´t need an i.c. during the installation? I am working under Windows now. my regards

  Read the article

• Can't access to a iSCSI volume

  - by jmiguel.rodriguez

  I have a iSCSI target on a customer place I'm using from an old Fedora (Core6) server. I configured it and formatted as ext3 (mistake, now I know) and I've been working with it for some time. Now I need to access this volume from other machine. As far as I've read, I can't do it safely from two machines at the same time (yep, that's the first thing I tried). So I've umount it from original server and tried to mount it on the new server (I did it at first with Ubuntu 10 LTS but when I was unable to do it I installed another Fedora with the same configuration) with no success. The problem: I can see all target on NAS but when I do a "fdisk -l" to see all devices and know which mount I see all targets as SFS filesystem. From the original server I see all SFS (after all, they belong to my customer and don't know what he have in) except the one I manage which I see as 'Linux'. What can I do? Thank you in advanced, regards, jmiguel

  Read the article

• Can I split one RAID1 partition in two?

  - by Prosys

  I have a linux box with CentOS 6.2 and a RAID1 (2x 2Tb) configuration: /dev/md1 -> / (10G) /dev/md2 -> /home (1.9T) I want to split the md2 in two different partitions, so I can get the following configuration: /dev/md1 -> / (10G) /dev/md2 -> /home (1T) /dev/md3 -> /example (900G) How can I achieve this? I already know that I can resize the partition, but that doesn't alter the real partition table (only the md device), so how can I do this?

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• Does /boot safe on top of a lvm LV (logical volume)?

  - by fantoman

  Title already asked the question. More specifically, I read in some documents that logical volumes are nice in general but not for /boot in a linux system. They say that bootloaders don't understand LVM volumes, so create a separate partition for /boot out of lvm. I recently installed Ubuntu server (9.10) for my home server, but by default /boot is created in the LVM. Everything is fine now, but I am not sure it is safe to use /boot in LVM. Second question is do I really need a physical partition (volume)(pv) for /boot or is it equally fine if I put it into a logical volume (lv) on top of a single shared volume group. Thanks in advance.

  Read the article

• Move and clone VirtualBox machines with filesystem commands

  - by mit

  I know of 2 ways to clone a VirtualBox machine on a linux host, one is by using the VirtualBox gui and exporting and re-importing as Appliance (in the file menu of VirtualBox). The other is by cloning only the virtual disk containers: VBoxManage clonevdi source.vdi target.vdi (Taken from http://forums.virtualbox.org/viewtopic.php?p=853#p858 ) I would have to create a new VM afterwards and use the cloned virtual disk. Is there a way I can just copy a virtual disk and the and do the rest by hand? I'd have to manually edit the ~/VirtualBox/VirtualBox.xml and insert a new disk and a new machine: Can I just make up UUIDs or how would this work? I would very much prefer this hardcore method of doing things as it allows me to freely and rapdily backup, restore, move or clone machines. Or ist there a better way to do this?

  Read the article

• Cannot access Nagios Web Interface

  - by Dominiqs

  After successfully installing Nagios core 3.4.1 (i also installed plug-in1.4.11) on our linux rhel 5.3 server i cannot login to the nagios web interface.I am running apache 2.2.3 I am using internet explorer 8 and also firefox 3.6.3 When i try to enter the url http//localhost/nagios/ on a desktop (on the same network as the Nagios server)it does seem to like it but if i try http//x.x.x.x/nagios/ (where x.x.x.x is the IP address of my nagios server) it likes it but then the authentication popup appears after entering the password and username(nagiosadmin) it throws the errors below The server x.x.x.x at Nagios access requires a username and password Warning this server is requesting that your username and password be sent in an insecure manner(basic authentication without a secure connection) After a few attempts i get error 401 authentication required error from internet explorer ;this server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials or your browser doesnt understand how to supply the credentials required. Help Please anyone..seems like an authentication issue

  Read the article

• How To Check My Current Version of FFMPEG

  - by aamiri

  I have FFMPEG installed on 2 different servers. On one of the servers, i run into an issue every time i try to convert m4v files where ffmpeg just processes the file indefinitely. When I take the same source file and try to run it on the other server it seems to work just fine. Both servers are running the same version of GNU/Linux. Some one suggested i check to see if the same version of ffmpeg is installed on the servers, so my question to you all is, "how do i check my ffmpeg version?" Thanks!

  Read the article

• Why is my portable WD MY PASSPORT drive is not recognized?

  - by kloop

  My "MY PASSPORT" (Western Digital) portable drive is not recognized OSx. It used to be recognized, but not anymore. It does not appear in /Volumes. The hard drive is recognized by a Linux machine. I am not sure what happened -- any ideas how to fix that? Thanks. EDIT: ` #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *750.2 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_HFS Macintosh HD 749.3 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *1.0 TB disk1 1: DOS_FAT_32 MY PASSPORT 1.0 TB disk1s1 `

  Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >