Search Results

Search found 7463 results on 299 pages for 'personal computers'.

Page 278/299 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

• Is Gmail Being Blocked by my ISP?

  - by james

  EDIT: I thought I pinpointed the problem. Just now I tried to go to the firefox addons page which uses https and gmail also uses https. So I thought I am unable to load https pages on this computer. So I went to a bank site which uses https but that loads just fine. Sigh.... I asked this over at superuser but they weren't able to help, so I was hoping the sysadmins here will be able to advise as to what's wrong. Although the issue here is with a PC and not a server it still deals with networking so I hope it's not too irrelevant. The Issue: I have a desktop on which I cannot access Gmail and also youtube sign in (I believe since youtube is owned by google they both use the same sign in system). On other computers that uses the same connection via a wireless router I can access both gmail and youtube sign in just fine. On this computer which doesn't have a wireless card and so I have to connect via Ethernet cable (connected to a USB converter since the Ethernet port doesn't work anymore) I can access all sites and services including things like aol and hotmail. But only when it comes to gmail, do I get complete and utter throttling. I even turned off my AV ad Firewall momentarily and no luck. The gmail log in page starts to load and by mid point it just stays there loading and loading and loading... never ends. I tried everything, I reset the modem and router multiple times. I reinstalled my operating system from a vista to a windows 7 hoping that a complete reinstall would solve the issue, but no luck. And yes, I am going to call my ISP but not to solve this issue, but to cancel them. I want to upgrade to cable from DSL anyway. I didn't mention my ISP because I'm not sure if that is within the rules (if it's okay some one let me know and I will). P.S. All this happened one day, before that gmail was perfectly accessible in this computer. I can't remember anything special happening on that day prior to this. The only thing I can think of is, my ISP or Google itself is blocking this computer based on it's mac address, but I don't know if that's even done. Additional info: PC: Windows 7 Ultimate 32 bit Connection Type: DSL Connecting Medium: Ethernet cable via USB converter I should mention I can access gmail and youtube just fine through a IP proxy service.

  Read the article

• lacp, cicso 3550, 3560, help with configuration

  - by Flamewires

  Hey all this is a repost from a question I asked on the cisco forums but never got a useful reply. Hey I'm trying to convert the FreeBSD servers at work to dual-gig lagg links from regular gigabit links. Our production servers are on a 3560. I have a small test environment on a 3550. I have achieved fail-over, but am having troubles achieving the speed increase. All servers are running gig intel (em) cards. The configs for the servers are: BSDServer: #!/bin/sh #bring up both interfaces ifconfig em0 up media 1000baseTX mediaopt full-duplex ifconfig em1 up media 1000baseTX mediaopt full-duplex #create the lagg interface ifconfig lagg0 create #set lagg0's protocol to lacp, add both cards to the interface, #and assign it em1's ip/netmask ifconfig lagg0 laggproto lacp laggport em0 laggport em1 ***.***.***.*** netmask 255.255.255.0 The switches are configured as follows: #clear out old junk no int Po1 default int range GigabitEthernet 0/15 - 16 # config ports interface range GigabitEthernet 0/15 - 16 description lagg-test switchport duplex full speed 1000 switchport access vlan 192 spanning-tree portfast channel-group 1 mode active channel-protocol lacp **** switchport trunk encapsulation dot1q **** no shutdown exit interface Port-channel 1 description lagginterface switchport access vlan 192 exit port-channel load-balance src-mac end obviously change 1000's to 100's and GigabitEthernet to FastEthernet for the 3550's config, as that switch has 100Mbit speed ports. With this config on the 3550, I get failover and 92Mbits/sec speed on both links, simultaneously, connecting to 2 hosts.(tested with iperf) Success. However this is only with the "switchport trunk encapsulation dot1q" line. First, I do not understand why I need this, I thought it was only for connecting switches. Is there some other setting which this turns on that is actually responsible for the speed increase? Second, This config does not work on the 3560. I get failover, but not the speed increase. Speeds drop from gig/sec to 500Mbit/sec when I make 2 simultaneous connections to the server with or without the encapsulation line. I should mention that both switches are using source-mac load balancing. In my test I am using Iperf. I have the server(lagg box) setup as the server(iperf -s), and the client computers are client(iperf -c server-ip-address), so the source mac(and IP) are different for both connections. Any ideas/corrections/questions would be helpful, as the gig switches are what I actually need the lagg links on. Ask if you need more information.

  Read the article

• Event ID 9331 MSExchangeSA & Event ID 9335 MSExchangeSA

  - by George

  I get this two Exchange 2010 Global Address book related event IDs: Event ID 9331 MSExchangeSA OABGen encountered error 80004005 (internal ID 50101f1) accessing the public folder database while generating the offline address list for address list '/'. -\Default Offline Address List and Event ID 9335 MSExchangeSA OABGen encountered error 80004005 while cleaning the offline address list public folders under /o=xxxxx xxxx/cn=addrlists/cn=oabs/cn=Default Offline Address List. Please make sure the public folder database is mounted and replicas exist of the offline address list folders. No offline address lists have been generated. Please check the event log for more information. -\Default Offline Address List It is Exchange 2010 SP2 sitting on Windows 2008 enterprise edition. Essentially the issue is that the global address book is not being updated on Outlook clients. We are using Outlook 2007 and 2010. So far I have tried running the following command: Update-FileDistributionService -Identity ExchangeServer -Type "OAB" And I tried this solution as well: 1) Make sure the Microsoft Exchange System Attendant is running. It will be set to start automatically by default, but it doesn't. This is a known issue. Start this service manually. When running, you will not get an error when trying to update the GAL. 2) "Apply" any changes made to any address lists before the GAL will update Outlook properly. In Organization Configuration - Mailbox in EMC, view the properties of the Default Global Address Book in the Offline Address Book tab. In the properties window, select the Address Lists tab. This shows which address lists makes up the GAL. 3) Close the properties window and select the Address Lists tab in the Organization Configuration - Mailbox. Right-click each address list used by the Def GAL and click "Apply" (make sure the "Immediately" radio button is checked). 4) Last, go back to the Offline Address Book tab, right-click the GAL and select "Update". After a few send/receives in the Outlook clients, their Glogal Address List should update to show the latest changes. Neither one of those solutions helped. So I am not really sure what to do here. Also, I am aware of changing registry on each local computers, but it would be close to impossible as we have 8 offices in 3 different countries. Any suggestions? EDIT 7.XII.2012 @ 10.35 I forgot to mention that we did rebuild the address book and that didn't help.

  Read the article

• Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

  - by Jay Michaud

  I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David Boike

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• VBA + Polymorphism: Override worksheet functions from 3rd party

  - by phi

  my company makes extensive use of a data provider using a (closed source) VBA plugin. In principal, every query follows follows a certain structure: Fill one cell with a formula, where arguments to the formula specify the query the range of that formula is extended (not an arrray formula!) and cells below/right are filled with data For this to work, however, a user has to have a terminal program installed on the machine, as well as a com-plugin referenced in VBA/Excel. My Problem These Excelsheets are used and extended by multiple users, and not all of them have access to the data provider. While they can open the sheet, it will recalculate and the data will be gone. However, frequent recalculation is required. I would like every user to be able to use the sheets, without executing a very specific set of formulas. Attempts remove the reference on those computers where I do not have terminal access. This generates a NAME error i the cell containing the query (acceptable), but this query overrides parts of the data (not acceptable) If you allow the program to refresh, all data will be gone after a failed query Replace all formulas with the plain-text result in the respective cells (press a button and loop over every cell...). Obviously destroys any refresh-capabilities the querys offer for all subsequent users, so pretty bad, too. A theoretical idea, and I'm not sure how to implement it: Replace the functions offered by the plugin with something that will be called either first (and relay the query through to the original function, if thats available) or instead of the original function (by only deploying the solution on non-terminal machines), which just returns the original value. More specifically, if my query function is used like this: =GETALLDATA(Startdate, Enddate, Stockticker, etc) I would like to transparently swap the function behind the call. Do you see any hope, or am I lost? I appreciate your help. PS: Of course I'm talking about Bloomberg... Some additional points to clarify issues raise by Frank: The formula in the sheets may not be changed. This is mission-critical software, and its way too complex for any sane person to try and touch it. Only excel and VBA may be used (which is the reason for the previous point...) It would be sufficient to prevent execution of these few specific formulas/functions on a specific machine for all excel sheets to come This looks more and more like a problem for stackoverflow ;-)

  Read the article

• Windows 2003 Storage Server Hanging on Large File Transfers

  - by user25272

  In one of our offices we have a Dell PowerVault 745N NAS device which acts as the main file server. Its running 32bit Windows 2003 Storage Server SP2 with 3GB RAM. The server holds around 60 users HOME folders, which are mapped via AD. The office clients are a mix of XP SP3, Vista and Windows 7. Occasionally the server will completely hang when transferring large files. When the hang happens the console becomes unresponsive with only the mouse active and blank wallpaper. Sometimes stopping the copy frees the server, sometimes not. The hanging can last around 20 minutes. During this time other servers also become unresponsive with blank wallpaper at the console. If you do manage to get onto another server the taskbar and run commands are unresponsive. This also transcends to the client computers sometimes with explorer crashing. I'm guessing this is due to the HOME folder mapping. Eventually the NAS server with free up and everything will be back to normal. The server is configured as follows: PERC 4/DC DATA 2 - 12 SCSI HDD - RAID5 SHADOWCOPY 2 SCSI HDD - RAID1 CERC SATA DATA 11 4 SATA HDD - RAID5 OS 4 SATA HDD - RAID5 All the drivers and firmware is up to date. I've been through all the diagnostics with Dell and the hardware has come up clean including full HDD tests on the arrays. The server has NOD32 installed as the AV, but the hanging happens when it is uninstalled. There are no errors in the event log when this happens and we don't have any errors logged on any of our ProCurve switches. DNS is fine on the domain and AD from what I can tell is running happily. There are no DFS or NFS shares setup either. All the shares are standard Windows. I've unchecked the allow the computer to turn off this device to save power box under Power Management on the NIC. "Set Link Speed and Duplex to Auto-negotiate 1000 " Increased Receive Descriptors buffer from 256 to 352 (reserves more CPU resource for handling data) I've run network traces using network monitor and have found the following: 417 8.078125 {SMB:192, NbtSS:25, TCP:24, IPv4:23} 192.168.2.244 192.168.5.35 SMB SMB:R; Nt Create Andx - NT Status: System - Error, Code = (52) STATUS_OBJECT_NAME_NOT_FOUND I've tried different cabling; NICs and switch ports all with the same result. Transferring files from other servers on the domain is fine. All I haven't done is run CHKDSK on the drives to look for any file system errors. On the Vista clients I have also run netsh interface tcp set global autotuning=disabled with no result. Could it be that the server has a faulty drive or that the I/O is too much for it to handle? Any ideas why would the hang cause issues with the other servers on the LAN? Many Thanks.

  Read the article

• pix 501, static route to d-link router (different subnet)

  - by ra170

  I have pix 501 cisco firewall with internal ip 192.168.10.1. I have connected d-link router (dir-655) to pix 501. The d-link router has internal ip 192.168.0.1 The picture would like something like that: |pix 501| has 192.168.10.1 ip |DIR-655| has 192.168.0.1 ip 1. |cable modem|----|pix 501|-------|DIR-655|-----PC 2. PC--------|pix 501|---------|DIR-655| | | |cable modem| When I'm on the wireless network (dir-655) with assigned ip of 192.168.0.x I can cross the subnet and connect to my firewall 192.168.10.1. (pic. 1) The problem is that if I'm on the 192.168.10.x network I can't connect to anything over at 192.168.0.x network. (pic.2) I've tried entering a static route like this: `route inside 192.168.0.0 255.255.255.0 192.168.10.1 1` I also tried assigning static ip to wan interface on DIR-655 to 192.168.10.30 and then tried this: route inside 192.168.0.0 255.255.255.0 192.168.10.30 1 But still, can't connect to 192.168.0.1 or anything on that subnet. Is there a way to setup a static route? Would adding a separate router between PIX 501 and DIR-655 help? I would think that static route like this should take care of it, but it doesn't. This is my route config and nat: (config)# sh route outside 0.0.0.0 0.0.0.0 (outside_IP) 1 DHCP static outside (outside_IP) 255.255.248.0 (outside_IP) 1 CONNECT static inside 192.168.0.0 255.255.255.0 192.168.10.1 1 OTHER static inside 192.168.10.0 255.255.255.0 192.168.10.1 1 CONNECT static or (route inside 192.168.0.0 255.255.255.0 192.168.10.30 1) (config)# sh nat nat (inside) 1 192.168.1.0 255.255.255.0 0 0 nat (inside) 1 192.168.10.0 255.255.255.0 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 I ended up turning DIR-655 into an Access Point (turning off DHCP and pluging cable from PIX lan interface into one of the LAN interfaces on DIR-655, and leaving WAN port empty), that works as far as DIR-655 being on the same subnet now, and I can access every machine. However the question is, why can't I simply route between those two? would router between these two help? One of the reasons is, that the PIX 501 has only 10 licences, so now I'm using almost all of them. (I have few computers, iphones, ps3, print server, etc.) I would really appreciate some help! Thanks.

  Read the article

• How to resolve `bootpd` crashing constantly on Mac OS X 10.6.4 Snow Leopard Server?

  - by morgant

  I've got a Mac Pro running Mac OS X 10.6.4 Snow Leopard Server and it's recently started getting numerous 'kNetworkError's in Server Admin.app when viewing services. It's acting as a gateway w/NAT and has been so for quite some time. There is one glaring issue, bootpd crashes all the time with the following errors in `/var/log/system.log/: Aug 12 16:54:59 servername bootpd[3572]: server starting Aug 12 16:54:59 servername bootpd[3572]: server name servername.domain.tld Aug 12 16:54:59 servername bootpd[3572]: interface en0: ip 10.0.1.9 mask 255.255.255.0 Aug 12 16:54:59 servername bootpd[3572]: bsdpd: re-reading configuration Aug 12 16:54:59 servername bootpd[3572]: bsdpd: shadow file size will be set to 48 megabytes Aug 12 16:54:59 servername bootpd[3572]: bsdpd: age time 00:15:00 Aug 12 16:54:59 servername bootpd[3572]: [3572] detected buffer overflow Aug 12 16:54:59 servername com.apple.launchd[1] (com.apple.bootpd[3572]): Job appears to have crashed: Abort trap Aug 12 16:54:59 servername com.apple.ReportCrash.Root[3571]: 2010-08-12 16:54:59.828 ReportCrash[3571:2807] Saved crash report for bootpd[3572] version ??? (???) to /Library/Logs/DiagnosticReports/bootpd_2010-08-12-165459_localhost.crash It is correctly configured to serve DHCP through en1 (not en0), the "LAN" port. This happens even with no hardware (even switches) connected to the "LAN" port. There are no DHCP clients listed. Oddly, the "Overview" shows 1 static map, but nothing is listed under "Static Maps" and there are no "Computers" in Open Directory. /var/db/dhcp_leases is empty. /Library/Logs/DiagnosticReports/bootpd_2010-08-12-165459_localhost.crash is as follows: Process: bootpd [3572] Path: /usr/libexec/bootpd Identifier: bootpd Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [1] Date/Time: 2010-08-12 16:54:59.713 -0400 OS Version: Mac OS X Server 10.6.4 (10F569) Report Version: 6 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Application Specific Information: __abort() called Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 libSystem.B.dylib 0x00007fff803c13d6 __kill + 10 1 libSystem.B.dylib 0x00007fff80461913 __abort + 103 2 libSystem.B.dylib 0x00007fff80456157 mach_msg_receive + 0 3 libSystem.B.dylib 0x00007fff803b92cf __strncpy_chk + 14 4 bootpd 0x0000000100014e5d PLCache_read + 782 5 bootpd 0x0000000100004a3d BSDPClients_init + 68 6 bootpd 0x00000001000053b5 bsdp_init + 2396 7 bootpd 0x000000010000200b S_update_services + 1228 8 bootpd 0x0000000100002344 S_server_loop + 571 9 bootpd 0x0000000100003963 main + 1766 10 bootpd 0x0000000100000984 start + 52 Thread 0 crashed with X86 Thread State (64-bit): rax: 0x0000000000000000 rbx: 0x00007fff5fbfe220 rcx: 0x00007fff5fbfe218 rdx: 0x0000000000000000 rdi: 0x0000000000000df4 rsi: 0x0000000000000006 rbp: 0x00007fff5fbfe240 rsp: 0x00007fff5fbfe218 r8: 0x0000000000000001 r9: 0x0000000100114280 r10: 0x00007fff803bd412 r11: 0xffffff80002e1680 r12: 0xffffffffffffffff r13: 0x00007fff5fbfe330 r14: 0x00007fff5fbfe33b r15: 0x00007fff7009bec0 rip: 0x00007fff803c13d6 rfl: 0x0000000000000202 cr2: 0x000000010004c000 Any thoughts or suggestions as to resolving this?

  Read the article

• Wireless Network Performance Issues

  - by colithium

  My brand new Dell XPS system has been running flawlessly except its abysmal download speeds. I have tried isolating every variable I could possibly think of but I can't figure out the problem. I've talked to Dell and Belkin without making progress (thought I'd try). Here are the speeds: Note that most of the time, upload speeds are actually much faster than download speeds (around 4.0 Mb/s which is better than most other devices on the network) It's not the ISP. The slowdown happens even when transferring files inside the network. Plus every other wireless device gets approximately this: It's not the wireless router. It's a Lynksis WRT160N v1 with the latest firmware (1.02.2). Plus everything else connected to it has normal speeds. It's not the browser. Speeds are the same in IE, FF, and when transferring files with Windows between computers. It's not the wireless adapter. I've tried a Belkin N Wireless USB Adapter (which works fine on another computer) and a Dell Wireless Draft 802.11n WLAN Mini-Card. They have the same slow speeds when connected to the problem computer. It's not the adapter connection. One adapter used USB and the other is a Mini-Card. It's not antenna placement. With the same antenna position and the same device, I get different speeds when connected to the problem computer vs a good computer. Plus everything reports the connection speed as at least 11Mbps and good signal strength. I've tried disabling IPv6 since it sometimes causes weird problems. I've tried disabling Windows Firewall/anti-virus. I've ensured the computer has updated drivers for both adapters. I've ensured that Windows is up to date and so is the BIOS. For the USB adapter I ensured that that USB port functioned at normal speeds with other USB devices. What else could it possibly be? I finally received my copy of Windows 7 and will be trying that. I'd rather not install Windows 7 because of a particular program that will stop working so a solution besides that is welcome. Specs: Vista x64 Core i7 920 6GB RAM 500GB HD GTX 260

  Read the article

• networked storage for a research group, 10-100 TB

  - by Marc

  this is related to this post: http://serverfault.com/questions/80854/scalable-24-tb-nas-for-research-department but perhaps a little more general. Background: We're a research lab of around 10 people who do a lot of experiments that involve taking pictures at one of several lab setups and then analyzing it an one of several lab computers. Each experiment may produce 2 or 3 GB of data, and we are generating data at the rate of about 10 TB/year. Right now, we are storing the data on a 6-bay netgear readynas pro, but even with 2 TB drive, this only gives us 10 TB of storage. Also, right now we are not backing up at all. Our short term backup plan is to get a second readynas, put it in a different building and mirror the one drive onto the other. Obviously, this is somewhat non-ideal. Our options: 1) We can pay our university $400/ TB /year for "backed up" online storage. We trust them more than we trust us, but not a whole lot. 2) We can continue to buy small NASs and mirror them between offices. One limit, although stupid, is that we don't have an unlimited number of ethernet jacks. 3) We can try to implement our own data storage solution, which is why I'm asking you guys. One thing to consider is that we're a very transient population and none of us are network administration experts. I will probably be here only another year or so, and graduate students, who are here the longest, have a 5-6 year time scale. So nothing can require expert oversight. Our data transfer rates are low - most of the data will just sit on the server waiting for someone to look at it once or twice - so we don't need a really high speed system. Given these contraints, can someone recommend a fairly low-cost, scalable, more or less turn key shared data storage system with backup in a separate physical location. Does such a thing exist or should we just pay the university to take care of it for us? As a second question, our professor just got tenure and is putting together a budget. Here the goal is to ask for as much as you can and hope you get a fraction of it. So the same question, minus the low-cost. Without budget constraints, can you recommend a scalable turn-key backed up storage system. Thanks

  Read the article

• Is it possible to "stealth" dual boot a machine?

  - by BrianH

  I have a loaner laptop that has MS Windows with locked down permissions. It works okay for what I need to do, but I started wondering if there was a way to install a separate Windows OS on a separate hard drive to do what I want to do on it. Virtual I wish I could use VirtualBox or VMWare, but that is not an option (I even tried VBox portable). External Drive My next trial was see if it was possible to install Windows on an external drive, and then plug that drive in and boot from it whenever I wanted my own OS. After a few Google searches, I see that is not really a possibility. Swap Primary Drive Another option, would be to get a second internal hard drive, take the existing HD out, and install a new Windows OS on the secondary HD. This would mean swapping the internal hard drive each time I want to switch OSs - doable, but not very convenient. Dual Boot The laptop has an expansion slot where a second hard drive can be plugged in quickly. I thought about Dual booting, but I don't want to mess with the MBR on the primary hard drive. When I have to give the laptop back, I don't want a dual-boot screen to popup. Summary Is there a way to have 2 hard-drives on a machine, each with it's own OS, and maybe use BIOS settings to have only 1 hard drive active at a time? That way both hard drives could be physically connected, but only one would actually be active at a time. I basically want a second OS that does not (can not) affect the existing OS in any way, and can be removed at any time without affecting the existing OS. The secondary OS does not need any of the files on the main hard drive - it's basically like having 2 separate computers using the same hard ware... Is this possible, or would it be easier just to go out and buy a different laptop? Thanks in advance! EDIT I just discovered that my BIOS allows me to pick (at startup) which hard drive I want to boot from. I poked around in the BIOS and there is not a place to disable certain devices, like the primary hard drive. My only concern about plugging in a second hard drive and installing Windows to the second hard drive is that it will mess with the primary hard drive, or add a bootloader screen to pick which windows install to use. My thought would be to physically unplug the primary, plug in the secondary and install windows to the secondary. After the install is working properly, I can plug the primary back in and use the BIOS feature to determine which drive to boot to. Is there any way after I have 2 separate installs on 2 separate hard drives that one of the installs could mess with the MBR on the other drive?

  Read the article

• Server 2008/Windows 7/Samba Unspecified error 80004005

  - by ancillary

  I have a Samba share on a LAN with 2008 PDC/DNS. Smb authenticates with AD and I have several Win7 Machines that can connect fine. I recently added a couple of new computers to the LAN which were imaged the same way (same software, etc.; different hardware so different drivers) as the other machines and they have the same policies set. I can not get the new machines to connect to the samba share no matter what. I am always met with either Unspecified Error 0x80004005 or Network Path not found. I've turned off the firewall; set LANMAN auth to respond to NTLM only/send LM & NTLM responses/use NTLM session security if negotiated in Local Sec Policy SEcurity Options; tried both ip and hostname to connect. SMB log shows that authentication succeeds; but then connection is immediately killed by the client. tcpdump shows nothing remarkable except that when trying to connect from the client via hostname there is an unknown packet type error: ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) Here's a couple of lines from that error: 11:18:37.964991 IP 001-client.domain.local.49372 > smb.domain.local.netbios-ssn: P 1670:2146(476) ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) [000] AA 46 96 FA D5 99 33 75 0C C4 20 CE 26 42 F3 61 \252F\226\372\325\2313u \014\304 \316&B\363a [010] F0 8C FB 65 18 17 40 A5 DB 42 BB 94 37 53 92 EC \360\214\373e\030\027@\245 \333B\273\2247S\222\354 [020] 55 98 7F C4 AE 3D 6B 10 C4 U\230\177\304\256=k\020 \304 11:18:37.964998 IP smb.domain.local.netbios-ssn > 001-client.domain.local.49372: . ack 2146 win 100 Here's smb.conf just in case (though don't see how if other machines are working fine): [global] workgroup = MYDOMAIN realm = MYDOMAIN.LOCAL server string = domain|smb share interfaces = eth1 security = ADS password server = 192.168.1.3 log level = 2 log file = /var/log/samba/%m.log smb ports = 139 strict locking = no load printers = No local master = No domain master = No wins server = 192.168.1.3 wins support = Yes idmap uid = 500-10000000 idmap gid = 500-10000000 winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes [samba-share1] comment = SMB Share path = /home/share/smb/ valid users = @"MYDOMAIN+Domain Users" admin users = @"MYDOMAIN+Domain Admins" guest ok = no read only = No create mask = 0765 force directory mode = 0777 Any ideas what else I could try or look for? Or what might be the problem? Thanks.

  Read the article

• SCCM SP2 - OOB Management Certificates Problems

  - by Achinoam

  Hi experts, I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

  Read the article

• Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

  - by Adam Ryczkowski

  Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

  Read the article

• Sharing folder in a Virtual Private Windows Server 2008 R2 ?

  - by Triztian

  See Edit 2: Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated. EDIT 1: As @tony roth pointed out it may be a security fail, an I commented it out to management and said that that is not an issue, so please bare with me. EDIT 2: I've found out that the real question could be streamlined to "Sharing folder in a Virtual Private Server?", as thats what we have, a virtual private windows server 2008 R2, and I would like to know how to make it show like a normal folder in the client computer. Thanks again for all of your support.

  Read the article

• How to keep group-writeable shares on Samba with OSX clients?

  - by Oliver Salzburg

  I have a FreeNAS server on a network with OSX and Windows clients. When the OSX clients interact with SMB/CIFS shares on the server, they are causing permission problems for all other clients. Update: I can no longer verify any answers because we abandoned the project, but feel free to post any help for future visitors. The details of this behavior seem to also be dependent on the version of OSX the client is running. For this question, let's assume a client running 10.8.2. When I mount the CIFS share on an OSX client and create a new directory on it, the directory will be created with drwxr-x-rx permissions. This is undesirable because it will not allow anyone but me to write to the directory. There are other users in my group which should have write permissions as well. This behavior happens even though the following settings are present in smb.conf on the server: [global] create mask= 0666 directory mask= 0777 [share] force directory mode= 0775 force create mode= 0660 I was under the impression that these settings should make sure that directories are at least created with rwxrwxr-x permissions. But, I guess, that doesn't stop the client from changing the permissions after creating the directory. When I create a folder on the same share from a Windows client, the new folder will have the desired access permissions (rwxrwxrwx), so I'm currently assuming that the problem lies with the OSX client. I guess this wouldn't be such an issue if you could easily change the permissions of the directories you've created, but you can't. When opening the directory info in Finder, I get the old "You have custom access" notice with no ability to make any changes. I'm assuming that this is caused because we're using Windows ACLs on the share, but that's just a wild guess. Changing the write permissions for the group through the terminal works fine, but this is unpractical for the deployment and unreasonable to expect from anyone to do. This is the complete smb.conf: [global] encrypt passwords = yes dns proxy = no strict locking = no read raw = yes write raw = yes oplocks = yes max xmit = 65535 deadtime = 15 display charset = LOCALE max log size = 10 syslog only = yes syslog = 1 load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes smb passwd file = /var/etc/private/smbpasswd private dir = /var/etc/private getwd cache = yes guest account = nobody map to guest = Bad Password obey pam restrictions = Yes # NOTE: read smb.conf. directory name cache size = 0 max protocol = SMB2 netbios name = freenas workgroup = COMPANY server string = FreeNAS Server store dos attributes = yes hostname lookups = yes security = user passdb backend = ldapsam:ldap://ldap.company.local ldap admin dn = cn=admin,dc=company,dc=local ldap suffix = dc=company,dc=local ldap user suffix = ou=Users ldap group suffix = ou=Groups ldap machine suffix = ou=Computers ldap ssl = off ldap replication sleep = 1000 ldap passwd sync = yes #ldap debug level = 1 #ldap debug threshold = 1 ldapsam:trusted = yes idmap uid = 10000-39999 idmap gid = 10000-39999 create mask = 0666 directory mask = 0777 client ntlmv2 auth = yes dos charset = CP437 unix charset = UTF-8 log level = 1 [share] path = /mnt/zfs0 printable = no veto files = /.snap/.windows/.zfs/ writeable = yes browseable = yes inherit owner = no inherit permissions = no vfs objects = zfsacl guest ok = no inherit acls = Yes map archive = No map readonly = no nfs4:mode = special nfs4:acedup = merge nfs4:chown = yes hide dot files force directory mode = 0775 force create mode = 0660

  Read the article

• Why can't I connect to remote Microsoft SQL Server through SSH tunnel?

  - by Alexander

  I have at home a D-Link DIR-615 C1 router with DD-WRT. I set up the SSH server on the router, and log on through an SSH2-RSA passphrase-protected key. That router is the gateway between the local network and the internet. One of the computers on that network has Microsoft SQL Server 2008 installed, with TCP/IP protocol enabled through port 1433. I've set up port forwarding on the router, so that remote connections are possible and are, in fact, working (some developers log on remotely without problems). I am part of another network, that has internet access through a proxy server, which only has ports 80 and 443 opened. I can't connect to that MSSQL server on that remote server because 1433 port is closed on this network. I connected (using Putty) through 443 port to my router's SSH server, and set up 2 tunnels. One is for RDP (3389), and it's working. The other is for 1433 port, to connect to the server. I can't connect through the SSH tunnel to the MS SQL Server, neither through telnet, or through GUI clients. Am I missing something? Additional details: on connect, I get this error from SQL Server Management Studio: TITLE: Connect to Server Cannot connect to localhost:14330. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 3) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3&LinkId=20476 BUTTONS: OK The tunnel is configured like this: L14330 192.168.0.103:1433 192.168.0.103 is the permanent address of the SQL Server on the LAN. I also successfully forwarded TCP traffic of 3389 port to that IP, so tunneling is working to that IP address. When connecting without tunnel, through Microsoft SQL Server Management Studio, using the same method the connection establishes. Too bad my proxy doesn't allow 1433 port traffic, I wouldn't have this headache.

  Read the article

• Recommendations or advice for shared computer control

  - by Telemachus

  Basic scenario: we are a school (overwhelmingly Mac, some Windows machines via BootCamp), and we are considering using DeepFreeze to guard the state of our shared machines. We have roughly 250 machines that are either shared laptops (which move around quite a bit) or common desktops in public spaces. Obviously, we spend a lot of time maintaining the machines and trying to reverse the inevitable drift as people make changes to the computers. We would like to control the integrity of the build we initially put onto the machines without handcuffing users and especially without using Mac's Parental Control software. (We've had nothing but bad experiences with it.) We've been testing DeepFreeze, and so far it's very impressive. But I'm curious to hear if people who have used DeepFreeze or any similar software have any advice or tips. To get things started, I will post my own pros and cons. Pros: The state of the machine is frozen in our chosen state. All changes made to the machine after that disappear upon restart. (This frozen state really appears to cover everything. I have yet to do something to a test machine that isn't instantly healed.) Tons of trivial but time-consuming maintenance is gone in an instant. Also, lots of not-so-trivial breakage should be avoided. There are good options, however, that allow you to create storage spaces either globally or per user. (Otherwise, stored files disappear upon reboot. For some machines, this is a good option itself. Simply warn people: save externally or else; this machine is a kiosk, not your storage space.) Cons: Anytime we actually need to make a change (upgrade basic software, add a printer or an airport permanently, add new software), the process is a bit more complex. Reboot into a special mode (thaw state), make changes, reboot back into frozen mode. If (when?) we forget this, we will end up making changes that disappear after the next reboot. Users will forget to save files correctly (in the right place or externally), and we will have loud, unpleasant conversations explaining that we can't recover the document they worked on all afternoon yesterday. The machine rebooted. The file is gone. These are my initial thoughts, but I would love to hear from other people who have experience with DeepFreeze or any similar software. What should we be careful about? Do the pros outweigh the cons? What gains or problems am I not seeing? Thanks.

  Read the article

• Batch file to uninstall all Sun Java versions?

  - by Ricket

  I'm setting up a system to keep Java in our office up to date. Everyone has all different versions of Java, many of them old and insecure, and some dating back as far as 1.4. I have a System Center Essentials server which can push out and silently run a .msi file, and I've already tested that it can install the latest Java. But old versions (such as 1.4) aren't removed by the installer, so I need to uninstall them. Everyone is running Windows XP. The neat coincidence is that Sun just got bought by Oracle and Oracle has now changed all the instances of "Sun" to "Oracle" in Java. So, I can conveniently not have to worry about uninstalling the latest Java, because I can just do a search and uninstall all Sun Java programs. I found the following batch script on a forum post which looked promising: @echo off & cls Rem List all Installation subkeys from uninstall key. echo Searching Registry for Java Installs for /f %%I in ('reg query HKLM\SOFTWARE\microsoft\windows\currentversion\uninstall') do echo %%I | find "{" > nul && call :All-Installations %%I echo Search Complete.. goto :EOF :All-Installations Rem Filter out all but the Sun Installations for /f "tokens=2*" %%T in ('reg query %1 /v Publisher 2^> nul') do echo %%U | find "Sun" > nul && call :Sun-Installations %1 goto :EOF :Sun-Installations Rem Filter out all but the Sun-Java Installations. Note the tilda + n, which drops all the subkeys from the path for /f "tokens=2*" %%T in ('reg query %1 /v DisplayName 2^> nul') do echo . Uninstalling - %%U: | find "Java" && call :Sun-Java-Installs %~n1 goto :EOF :Sun-Java-Installs Rem Run Uninstaller for the installation MsiExec.exe /x%1 /qb echo . Uninstall Complete, Resuming Search.. goto :EOF However, when I run the script, I get the following output: Searching Registry for Java Installs 'DEV_24x6' is not recognized as an internal or external command, operable program or batch file. 'SUBSYS_542214F1' is not recognized as an internal or external command, operable program or batch file. And then it appears to hang and I ctrl-c to stop it. Reading through the script, I don't understand everything, but I don't know why it is trying to run pieces of registry keys as programs. What is wrong with the batch script? How can I fix it, so that I can move on to somehow turning it into a MSI and deploying it to everyone to clean up this office? Or alternatively, can you suggest a better solution or existing MSI file to do what I need? I just want to make sure to get all the old versions of Java off of everyone's computers, since I've heard of exploits that cause web pages to load using old versions of Java and I want to avoid those.

  Read the article

• Windows 2008 R2 IPsec encryption in tunnel mode, hosts in same subnet

  - by fission

  In Windows there appear to be two ways to set up IPsec: The IP Security Policy Management MMC snap-in (part of secpol.msc, introduced in Windows 2000). The Windows Firewall with Advanced Security MMC snap-in (wf.msc, introduced in Windows 2008/Vista). My question concerns #2 – I already figured out what I need to know for #1. (But I want to use the ‘new’ snap-in for its improved encryption capabilities.) I have two Windows Server 2008 R2 computers in the same domain (domain members), on the same subnet: server2 172.16.11.20 server3 172.16.11.30 My goal is to encrypt all communication between these two machines using IPsec in tunnel mode, so that the protocol stack is: IP ESP IP …etc. First, on each computer, I created a Connection Security Rule: Endpoint 1: (local IP address), eg 172.16.11.20 for server2 Endpoint 2: (remote IP address), eg 172.16.11.30 Protocol: Any Authentication: Require inbound and outbound, Computer (Kerberos V5) IPsec tunnel: Exempt IPsec protected connections Local tunnel endpoint: Any Remote tunnel endpoint: (remote IP address), eg 172.16.11.30 At this point, I can ping each machine, and Wireshark shows me the protocol stack; however, nothing is encrypted (which is expected at this point). I know that it's unencrypted because Wireshark can decode it (using the setting Attempt to detect/decode NULL encrypted ESP payloads) and the Monitor Security Associations Quick Mode display shows ESP Encryption: None. Then on each server, I created Inbound and Outbound Rules: Protocol: Any Local IP addresses: (local IP address), eg 172.16.11.20 Remote IP addresses: (remote IP address), eg 172.16.11.30 Action: Allow the connection if it is secure Require the connections to be encrypted The problem: Though I create the Inbound and Outbound Rules on each server to enable encryption, the data is still going over the wire (wrapped in ESP) with NULL encryption. (You can see this in Wireshark.) When the arrives at the receiving end, it's rejected (presumably because it's unencrypted). [And, disabling the Inbound rule on the receiving end causes it to lock up and/or bluescreen – fun!] The Windows Firewall log says, eg: 2014-05-30 22:26:28 DROP ICMP 172.16.11.20 172.16.11.30 - - 60 - - - - 8 0 - RECEIVE I've tried varying a few things: In the Rules, setting the local IP address to Any Toggling the Exempt IPsec protected connections setting Disabling rules (eg disabling one or both sets of Inbound or Outbound rules) Changing the protocol (eg to just TCP) But realistically there aren't that many knobs to turn. Does anyone have any ideas? Has anyone tried to set up tunnel mode between two hosts using Windows Firewall? I've successfully got it set up in transport mode (ie no tunnel) using exactly the same set of rules, so I'm a bit surprised that it didn't Just Work™ with the tunnel added.

  Read the article

• libreadline history lines combine

  - by jettero

  This has been driving me crazy for about three years. I don't know how to fully describe the problem, but I think I can finally describe a way to recreate it. Your milage may vary. I have a mixture of ubuntu server and desktop machines of various versions and a few gentoo machines with various states of disrepair. They all seem to kindof do their own thing, although with similarities. Try this and let me know if you see the same thing. pop open two xterms (TERM=xterm) resize one so they're not the same issue screen -R test1 in one (TERM=screen) and screen -x test1 in the other hooray, typing in one shows up in the other; although notice that their different size produces artifacts and things issue a couple commands in your shell hit ^AF in the one that doesn't fit quite right, now it fits!! scroll back over the history a little goto 6 Eventually you'll notice a couple history lines combine. If you don't, then it's something unique to my setup, which spans various distributions and computers; so that's a confusing concept to me. If you see the thing I'm seeing then this: bash$ ls -al bash$ ps auxfw becomes this: bash$ ls -al; ps auxfw It doesn't happen every time. I have to really play with it — unless I don't want it to happen, then it always does. On some systems (or combinations), I get a line separator like the example above. On some systems, I do not. That I get the line separator on some systems seems to indicate to me that bash supports this behavior. Its history is entirely handled by libreadline and after perusing (ie, carefully reading) the man pages, I couldn't find a single readline setting for combining two history lines. Nor can I find anything in the bash manpage. So, how can I invoke this on purpose? Or, if I can't do that, how can I disable it completely? I would take either answer as a solution. Currently, I only see it when I don't want it.

  Read the article

• SCCM SP2 - OOB Management Certificates Problems

  - by Achinoam

  I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

  Read the article

• Why can't I connect to remote Microsoft SQL Server through SSH tunnel?

  - by Alexander

  I have at home a D-Link DIR-615 C1 router with DD-WRT. I set up the SSH server on the router, and log on through an SSH2-RSA passphrase-protected key. That router is the gateway between the local network and the internet. One of the computers on that network has Microsoft SQL Server 2008 installed, with TCP/IP protocol enabled through port 1433. I've set up port forwarding on the router, so that remote connections are possible and are, in fact, working (some developers log on remotely without problems). I am part of another network, that has internet access through a proxy server, which only has ports 80 and 443 opened. I can't connect to that MSSQL server on that remote server because 1433 port is closed on this network. I connected (using Putty) through 443 port to my router's SSH server, and set up 2 tunnels. One is for RDP (3389), and it's working. The other is for 1433 port, to connect to the server. I can't connect through the SSH tunnel to the MS SQL Server, neither through telnet, or through GUI clients. Am I missing something? Additional details: on connect, I get this error from SQL Server Management Studio: TITLE: Connect to Server Cannot connect to localhost:14330. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 3) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3&LinkId=20476 BUTTONS: OK The tunnel is configured like this: L14330 192.168.0.103:1433 192.168.0.103 is the permanent address of the SQL Server on the LAN. I also successfully forwarded TCP traffic of 3389 port to that IP, so tunneling is working to that IP address. When connecting without tunnel, through Microsoft SQL Server Management Studio, using the same method the connection establishes. Too bad my proxy doesn't allow 1433 port traffic, I wouldn't have this headache.

  Read the article

• Problem with several USB devices on Windows XP. How to diagnose USB device?

  - by Lukasz Baran

  Hello All, Recently I've bought some electronic devices (like e.g. Sony Ebook reader PRS-600 or HP PDA IPaq) which are connected to PC using USB ports. These devices have own batteries and they are recharged using USB. However, I am experiencing a problem with Ebook Reader and the similiar thing happens with my PDA (but in this case it's more rare). Sometimes, I am unable to make it start recharging, when it's connected to USB port. The LCD diode on my Reader lights up and the icon in the system tray appears. They both indicate that the device has been connected. However, the device should start recharching and it should appear on Windows XP as a 'explorable' device (just like pendrive it offers some HDDs). None of these happens:( This problem appears on two PCs - desktop and laptop. Both have Windows XP SP3 installed. And what's interesting and surprising to me is the fact that these devices sometimes work without any problems. I mean, I just plug them in and they work properly. Besides that, there are some computers (I have tested a variety of possible conditions) on which the problem does not appear! I am confused and, on the other hand, determined to find out what is the real cause of such strange behavior. Maybe I'm wrong but I always assumed that I'm using deterministic machines, but the described situation makes me feel like I was dreaming:) And that's why I'm asking you here. Are there any tools that could help me diagnose USB ports? Or maybe anyone knows the solution? I have a lot experience with low level programming (mostly from the times of MS-DOS applications), but I'm not an expert when it comes to WinXP technology. If this was a problem with network connection, I would know what to do - I know how to track network traffic, but with USB ports I feel powerless. I have a feeling that the problem may lie in a way WinXP handles USB devices. Personally, I hate auto-discovery and P'n'P features available in Windows. I know that some of may suggest to move to Linux or other *Nix system. Unfortunately, I have to use WinXP in my professional life, so it's rather impossible. Besides that, I don't consider XP as a total disaster. Any help from you will be appreciated!

  Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >