Search Results

Search found 19131 results on 766 pages for 'power options'.

Page 279/766 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

  • AC/battery laptop issues(not a simple charging fix)

    - by Deric Hatchett
    Is it possible to run a laptop off the battery while the AC is plugged in? I can play games no problem while just the battery is plugged in, but obviously that means I have to let it charge after every hour or so. But, when I plug it in to charge, it can't handle any video games anymore. I thought it was the brick in the power cord going out, but I just bought a new one and it still doesn't work. The specs are actually better than the old cord. I think the problem is an over heating problem in the AC outlet, but if it charges the battery while I play, it would work just fine running solely off the battery.

    Read the article

  • RAID 1 not performing as expected

    - by Faken
    I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

    Read the article

  • Clean toshiba a300d 14r

    - by pask
    Hi all, i'm not able to open my notebook, a toshiba a300d-14r. Googling i don't find any useful information... This is official site: http://it.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=IT&PRODUCT_ID=1056713&DISC_MODEL=1#0 Anyone have an idea to open it. The fan goes crazy when power on and i suppose that is full of dusty. I need to clean the fan... Is there a guide or a useful information to do it? thanks, A

    Read the article

  • Clean toshiba a300d 14r

    - by pask
    Hi all, i'm not able to open my notebook, a toshiba a300d-14r. Googling i don't find any useful information... This is official site: http://it.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=IT&PRODUCT_ID=1056713&DISC_MODEL=1#0 Anyone have an idea to open it. The fan goes crazy when power on and i suppose that is full of dusty. I need to clean the fan... Is there a guide or a useful information to do it? thanks, A

    Read the article

  • How to add admin users in 389 LDAP, fedora directory server

    - by chandank
    I want to create couple of Admin users who have access to create/delete users on a particular group/Organization Unit. For example, User: uid=testadmin, ou=people, dc=my,dc=net Should have access to create new users/delete users under ou=People,dc=my,dc=net I tried with below ACI but did not work (target = "ldap:///ou=People,dc=my,dc=net")(targetattr = "*") (version 3.0;acl "testadmin Permissions";allow (proxy)(userdn = "ldap:///uid=testadmin,ou=people,dc=my,dc=net");) I am able to add administrative users from the Directory Server console, but this user data is not stored in ldif files and only stored in binary database at /var/lib/dirsrv/slap-ldap/db/. Only problem is these users have full power and I am not sure how to restrict their access.

    Read the article

  • Apple Airport Extreme Wireless Card M8881 Connectivity Issue

    - by Carlosfocker
    I bought a Apple Airport Extreme Wireless Card M8881 with the antenna for my old Power Mac G5 1.6 Ghz. The computer is running OS X 10.4. The card works and I can connect to my dlink 802.11g wireless router using WPA2/AES encryption. The problem is that the connection has intermittent connectivity issues. When the issue occurs the signal bars for the connection drop to one or two bars and the performance of the connection suffers greatly. The computer isn't far from the wireless router. I have a laptop at the desk where the mac is and it does not have any issues. I'm not sure what it might be? Updated drivers? Firmware? Let me know if I forgot any important information.

    Read the article

  • Fixing restore active desktop on windows xp

    - by Rachel Nark
    I've already tried this: http://answers.microsoft.com/en-us/windows/forum/windows_xp-desktop/windows-xp-will-not-restore-my-active-desktop/f664bfe4-0acd-4b11-8918-eb779bb2cc07 had no luck. All I know is that the computer crashed from a power outage. I've tried clicking the restore button and rebooting. Nothing. What else is there to try? Would like to have the desktop back. It powers on fine. I can login and use windows just fine. Just you get that annoying restore active desktop screen.

    Read the article

  • How do I restore a Dell Inspiron 1521 laptop to factory defaults?

    - by Solignis
    I got a Dell Inspiron 1521 laptop from a local computer store that a buddy of mine works at. When I turned it on I had come to realize it has not been wiped and reverted to factory defaults. How can revert the machine to factory defaults? I do not have any of the CDs that came with the machine, all I have is the computer and the power brick. But if it helps any I can able to get into Windows so I full access to the machine.

    Read the article

  • Difficulty racking HP ProLiant Gen8 servers

    - by Systemspoet
    We're an all Proliant shop with around 50 servers, mostly DL360s and DL380, from G5's through G7's. We just got our first two G8's in and went to rack them. We were stunned to find out that the new cable management arms protrude almost 1 inch deeper into the rack then previous iterations of the Proliant line. Unfortunately that causes them to occupy the same space as the PDU's in our APC racks. In a non-densely populated section of rack that's no biggie, but in a densely populated section it's impossible to get the cable arm into place without dislodging another machine's power. Has anyone else run into this? Obviously racking machines without cable management arms is not an option. I supposed we could reconfigure our racks but that's a nightmare.

    Read the article

  • Add less than integer variable to string search

    - by user1691832
    I'm scanning a text document for certain installed programs on a computer and looking for an easy way to include a greater or less than variable in the string I'm scanning for. Here is a very ugly and cumbersome example of what I'm using currently and while it works as a temporary fix, isn't practical or sustainable. If CheckBox2.Checked Then sReader.Close() If text.Contains("Adobe Flash Player 11 Plugin") And text.Contains("Adobe Flash Player 11 ActiveX") Then Else If text.Contains("Adobe Flash Player 12 Plugin") And text.Contains("Adobe Flash Player 12 ActiveX") Then Else If text.Contains("Adobe Flash Player 13 Plugin") And text.Contains("Adobe Flash Player 13 ActiveX") Then Else '(Goes ahead and does a silent install of the missing or outdated program) So far I've run into this problem with both Adobe Flash and Java RTE and am certain to run into it with future programs. Essentially I need to scan for "Adobe Flash Player (Any number less than 11) Plugin" , "Adobe Flash Player (Any number less than 11) ActiveX" , "Java (number less than 9) Update (any number)". I'm sure whatever solution is offered can likely be adapted to similar programs I'm likely to encounter later. Thanks ----- Edit ----- I've since tried the following code but it always returns the "Found" messagebox, even when no version of adobe flash is present in the file it is scanning. If CheckBox2.Checked Then sReader.Close() Dim options As RegexOptions = RegexOptions.None Dim regex As Regex = New Regex("Adobe Flash Player (?<version>\d+) (Plugin|ActiveX)", options) Dim input As String = "Adobe Flash Player 11 Plugin" ' Get match Dim match As Match = regex.Match(input) Dim version As String = match.Groups("version").Value If (match.Success) Then MessageBox.Show("Version 11 or higher found, skipping install") Else MessageBox.Show("Version 11 or higher not found, installing Version 11")

    Read the article

  • how to send on users profile page on selecting username( using json autosuggest script)

    - by I Like PHP
    i m using auto suggest using Ajax Json . now when a user select a user name , i want to send user on the link of that user name my json data is coming in this way { query:'hel', suggestions:["hello world","hell boy ","bac to hell"], data:["2","26","34"] } now what i want that user goes to http://userProfile.php?uid=26 on select username(suppose user select "hell boy") how to do this?? UPDATE: i describe what i m doing step by step i m using a searchbox using jquery ajax, when user write some text on input box , we show (suggest) value regarading their search STEP 1. when user write atleast(2 letter) <input type="text" name="q" id="query" />then a function(below) in invoked in which i send the value written on text box(eg. hell). <script type="text/javascript" language="javascript"> var options, a; jQuery(function(){ options = { serviceUrl:'rpc.php' }; var a = $('#query').autocomplete({ serviceUrl:'rpc.php', minChars:3, delimiter: /(,|;)\s*/, // regex or character maxHeight:400, width:300, zIndex: 9999, deferRequestBy: 0, //miliseconds }); }); </script> STEP 3: on rpc.php, i collect the data and show using JSON my final data come in below format { query:'hell', suggestions:["hello world","hell boy ","bac to hell"], data:["2","26","34"] } where suggestion list having username and data is userid( from user_tables). above data comes in a div (on frontend) where user name displayed in a list STEP 4: now if i select any username using uparrow, downarrow then that name is filled in input box, STEP 5: now what i want that when user select usename then page automatically goes to that user's profile section ( userprofile.php?uid=2)

    Read the article

  • Heterogeneous queries require the ANSI_NULLS

    - by Dezigo
    I wrote a trigger. USE [TEST] GO /****** Object: Trigger [dbo].[TR_POSTGRESQL_UPDATE_YC] Script Date: 05/26/2010 08:54:03 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER TRIGGER [dbo].[TR_POSTGRESQL_UPDATE_YC] ON [dbo].[BCT_CNTR_EVENTS] FOR INSERT AS BEGIN DECLARE @MOVE_TIME varchar(14); DECLARE @MOVE_TIME_FORMATED varchar(20); DECLARE @RELEASE_NOTE varchar(32); DECLARE @CMR_NUMBER varchar(15); DECLARE @MOVE_TYPE varchar(2); SELECT @MOVE_TIME = inserted.move_time ,@MOVE_TYPE = inserted.move_type ,@RELEASE_NOTE = inserted.release_note ,@CMR_NUMBER = inserted.cmr_number FROM inserted IF(@MOVE_TYPE = 'YC') BEGIN SET @MOVE_TIME_FORMATED = SUBSTRING(@MOVE_TIME,1,4) + '-' + SUBSTRING(@MOVE_TIME,5,2) + '-' + SUBSTRING(@MOVE_TIME,7,2) + ' 00:00:00' --UPDATE OpenQuery(POSTGRESQL_SERV,'SELECT visit_cmr,visit_timestamp,visit_pin FROM VISIT') -- SET visit_cmr = @RELEASE_NOTE -- WHERE visit_timestamp = @MOVE_TIME_FORMATED -- AND visit_pin = right(@CMR_NUMBER,5) -- AND visit_cmr IS NULL END SET NOCOUNT ON; END When I have inserted a row,I have get an error **Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query.** Then I ofcourse SET SET ANSI_WARNINGS is ON but it`s not work for me. (trigger fo linked server postgresql) I have restarted a server. not work again.

    Read the article

  • Fedora Core 11 won't boot without a monitor

    - by feihtthief
    I have a P4 system that I installed Fedora 11 on. It will not boot without a monitor attached. The monitor can be off (not even have power plugged in), but must be attached. Without a monitor the hard disk thrashes around a bit like it's starting up services, but does not get to the point where I can ssh into the box. I have set the default runlevel to 3 and removed the rhgb entry from grub. Any suggestions welcome. Edit: I have already set the run-level to 3. The machine boots up fine with the monitor plugged in to the point where I can SSH into it. as soon as i unplug the monitor and reboot, it will not boot to that point.

    Read the article

  • PC reboots spontaenously: debugging tips

    - by aaron
    I swapped my core 2 duo for a quad core recently, and generally things run fine, but every now and then my computer just restarts. I don't even get a blue screen (Vista 32). Core temp isn't a problem. My thinking is that my power supply is inadequate, but I haven't been able to test that (one idea was to under clock the cpu to see if that helped, but going up in speed was the only simple thing to do in the BIOS) Two cases where I semi-consistanly get problems: - Borderlands windowed after some period of time (and some other games, but Borderlands does it pretty regularly) - watching a video (e.g. quicktime/vlc) and having another video running Another thought is non-cpu heat? Maybe the graphics card? Any thoughts on how to track this down appreciated. Thanks!

    Read the article

  • Laptops trying to connect via wireless? Only able to connect only via wired connection

    - by Chris J. Lee
    It seems that all the wireless laptops in the office have disconnected and are unable to reconnect to the wifi after a terrible storm caused some power interruptions. Troubleshooting actions Verify wireless broadcasting is up With each laptop i ended up flushing their dns cache on Win 7 (ipconfig /flush ) Performed an ipconfig /all to see what the new ip is Made sure password was correct Reset the router (multiple times) restarted each laptop. Tried connecting wirelessly Am i missing some small detail ? Network information The router is a linksys/cisco WRVS4400N router. Supports a lot of fancy features i don't know how to use. We have 3 static ip's the conference room computer, the wireless printer, my computer Mostly windows machines, we have 3 mac users

    Read the article

  • How to identify cause of system lock on debian squeeze?

    - by David Sanders
    I have a desktop system at work with debian squeeze installed. Every couple days or so, when I come in in the morning, the system appears to be asleep and won't wake up. I suspect it goes into power save mode and then doesn't receive the wake up signal when I click the mouse or touch the keyboard. Does anyone know where I should look in order to start tracking this down? Like log files, etc? I doubt it, but maybe the fact that I'm using a mac aluminum usb keyboard and a wireless usb mouse (that has an off switch) has something to do with it? Maybe, when I turn my mouse off at the end of the day, the system loses track of the device somehow? I dunno :P. Thanks in advance.

    Read the article

  • Macbook Pro + Windows 7 (bootcamp) = Terrible battery life

    - by Scott Beeson
    I recently put Windows 7 Ultimate x64 on my wife's Macbook pro because of some software she bought for her business. Since then, the battery life has been abysmal. I've identified and researched one of the problems, which is display brightness. There is no brightness control in the windows power options, but I did manually turn it down in Bootcamp. However, it is still reporting very low battery life estimates. I'm wondering if this is because Windows thinks the display is at full brightness. Can anyone shed any light on this? (Pun intended). Also, are there any other things to look out for that may improve the battery life? (I mean in the context of Mac + Windows, not in general)

    Read the article

  • how to access anti aliasing method of a font with CSS

    - by Daniel Ramirez-Escudero
    I've had this problem in a lot of different webs. You have a font which has different anti-aliasing options, the designer uses the same font with different anti-aliasing options on different parts of the text on the web. So there is a difference between some elements. In this case I have sharp, crisp, strong and smooth. I've used a font generator to get the code to access it via @font-face. Even so, I also have the original .otf if important to know. Is there a method to access this? I upload a picture of what I mean and my actual code: ![@font-face { font-family: 'light'; src: url('../_fnt/light/gothamrnd-light.eot'); src: url('../_fnt/light/gothamrnd-light.eot?#iefix') format('embedded-opentype'), url('../_fnt/light/gothamrnd-light.woff') format('woff'), url('../_fnt/light/gothamrnd-light.ttf') format('truetype'), url('../_fnt/light/gothamrnd-light.svg#../_fnt/light/gothamrnd-light') format('svg'); font-weight: normal; font-style: normal; }]![enter image description here][1]

    Read the article

  • Computer sending data while turned of

    - by Nicklas Ansman
    I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas

    Read the article

  • Strange noise from my laptop when it is closed

    - by gotqn
    I am fan of powerfull PCs with huge wide screen monitors but I have bought an laptop as gift to my parents. This is the description: "second-handed" lenovo (and there is a sign "ThinkPad" Intel Core Duo CPU T6570 2.10 GHz 64 bits Windows 7 Ultimate and the issue is that when the laptop is turn on and then closed, after a interval of time (I am not sure how much exactly but I believe it is several hours) a strange noise come from the laptop. The noise is something like a "start-up" noise of old computers. I first thought this is some hardware issue but everything seems to work fine. Has anyone an idea what can cause this type of noise or a what can I do in order to track the problem down? I am not sure if this is a important thing, but the laptop is always connected to the power. Note: I have just noticed that the sound is generated again when the laptop is closed and then opened. Note: This is link to the audio - http://yourlisten.com/channel/content/16934332/WindowsStrangeNoise

    Read the article

  • BGP Router reccomendations for simple redundancy [closed]

    - by Jona
    We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

    Read the article

  • Software for printing small photos on larger paper with easy layout snapping

    - by ldigas
    Have some photos and pictures to print (graphs, but that doesn't matter here). So far when printing I inserted them in MS Word, played with layout on the paper, and after half a day, finally managed to get it just right. Usually then, the power runs out :-) Anyways, does anyone know of any software which enables me to easily put up some kind of a layout (one under the other, or some rectangular grid) where I can just "snap" photos next to each other, before printing the whole thing. I know I can do that in pretty much any photo editing program, but the problem is that that pixel hunting takes time ... and is generally a very annoying process, expecially when you don't want to edit the photos in mind, just print them out. Anyways, I'm sure you get the general idea ... Suggestions ?

    Read the article

  • Software for capturing still image snapshots from video input

    - by cantabilesoftware
    What software is available that will let me watch video from a USB video capture device at full PAL/NTSC resolution and capture a still image at a button press? More info: I'm using a KaiserBaas USB capture device (http://www.kaiserbaas.com/kaiser-baas-product-page/converters/video-to-dvd-maker), and want to capture screen shots from a PS2 connected to it. I'd like to play the game at the full PS2 resolution and capture certain scenes. The device has a one-touch snapshot button on it, but I can't seem to make it work and there's no mention of it anywhere in the documentation. The device works and the video appears in Power Producer (the included software), but I think it previews it smaller than the full resolution. I could print screen it, but having to crop will be a pain.

    Read the article

  • Can a page opt out of IIS 7 compression?

    - by Glen Little
    My pages are automatically being compressed by IIS7 with GZIP. That is great... but, for one particular page, I need to stream it to the user, using Response.Flush() when needed. But when the output is being compressed, the IIS server seems to collect all my output until the page is done before compressing and sending it to the client. That nullifies my attempt to Flush the content out to the user. Is there a way that I can have this one page opt out of the compression? One possible option I've determined that if I manually set the content type to one that does not match the IIS configuration at c:\windows\system32\inetsrv\config\applicationhost.config, then IIS will not compress it. Eg. Response.ContentType = "x-text/html". This works okay with IE8, as it falls back to display the HTML. But Firefox will ask the user what to do with the unknown file type. This could work, if there was another Mime Type I could use that browsers would accept as HTML, that is not matched in the applicationhost.config. For reference, these are the mime types that will be compressed: <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/atom+xml" enabled="true" /> <add mimeType="application/xaml+xml" enabled="true" /> Others options? Are there other options to opt out of compression?

    Read the article

  • Is there any Mac Pro hardware parts that can ONLY be purchased thru Apple?

    - by bigp
    I'd like to know if I need to be concerned about any hardware parts that I should include in a brand new Mac Pro purchase, instead of trying to hunt it down on 3rd party vendors (or whitelist vendors / hardware suppliers). The main components I'm interested for "upgradeability" are: Processors (If starting with Two 2.4GHz Quad-Core "Westmere"); RAM (If starting with the least possible, which seems to be 6 x 1GB); Video Cards (If starting with one ATI Radeon HD 5770, can a 2nd one be purchased elsewhere?) Hard-Drives (Since these are mounted in specialized trays [if I'm not mistaking], are they also sold elsewhere? And can they be bought as SSDs?) Power Supply (Do I need to be concerned about this at all, or does it auto-adjust depending on the new component upgrades?) I just want to be sure by choosing a Mac Pro with lower component specifications that I can in fact purchase upgrade parts cheaper elsewhere. Thanks!

    Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >