Search Results

Search found 8416 results on 337 pages for 'stop'.

Page 279/337 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

  • Why do InterruptedExceptions clear a thread's interrupted status?

    - by Hanno Fietz
    If a thread is interrupted while inside Object.wait() or Thread.join(), it throws an InterruptedException, which resets the thread's interrupted status. I. e., if I have a loop like this inside a Runnable.run(): while (!this._workerThread.isInterrupted()) { // do something try { synchronized (this) { this.wait(this._waitPeriod); } } catch (InterruptedException e) { if (!this._isStopping()) { this._handleFault(e); } } } the thread will continue to run after calling interrupt(). This means I have to explicitly break out of the loop by checking for my own stop flag in the loop condition, rethrow the exception, or add a break. Now, this is not exactly a problem, since this behaviour is well documented and doesn't prevent me from doing anything the way I want. However, I don't seem to understand the concept behind it: Why is a thread not considered interrupted anymore once the exception has been thrown? A similar behaviour also occurs if you get the interrupted status with interrupted() instead of isInterrupted(), then, too, the thread will only appear interrupted once. Am I doing something unusual here? For example, is it more common to catch the InterruptedException outside the loop? (Even though I'm not exactly a beginner, I tagged this "beginner", because it seems like a very basic question to me, looking at it.)

    Read the article

  • Limit Annotation number in Mapkit

    - by teddafan
    Hi all, I want to stop my app from loading more annotations after they are all added ( they are added by the user one by one). How would you do that? the following code is what i think is important (void) loadAndSortPOIs { [poiArray release]; nextPoiIndex = 0; NSString *poiPath = [[NSBundle mainBundle] pathForResource:@"pois" ofType:@"plist"]; poiArray = [[NSMutableArray alloc] initWithContentsOfFile:poiPath]; CLLocation *homeLocation = [[CLLocation alloc] initWithLatitude:homeCoordinate.latitude longitude:homeCoordinate.longitude]; for (int i = 0; i < [poiArray count]; i++) { NSDictionary *dict = (NSDictionary*) [poiArray objectAtIndex: i]; CLLocationDegrees storeLatitude = [[dict objectForKey:@"workingCoordinate.latitude"] doubleValue]; CLLocationDegrees storeLongitude = [[dict objectForKey:@"workingCoordinate.longitude"] doubleValue]; CLLocation *storeLocation = [[CLLocation alloc] initWithLatitude:storeLatitude longitude:storeLongitude]; CLLocationDistance distanceFromHome = [storeLocation getDistanceFrom: homeLocation]; NSMutableDictionary *mutableDict = [[NSMutableDictionary alloc] initWithDictionary:dict]; [mutableDict setValue:[NSNumber numberWithDouble:distanceFromHome] forKey:@"distanceFromHome"]; [poiArray replaceObjectAtIndex:i withObject:mutableDict]; [mutableDict release]; } [homeLocation release]; // now sort by distanceFromHome NSArray *sortDescriptors = [NSArray arrayWithObject: [[NSSortDescriptor alloc] initWithKey: @"distanceFromHome" ascending: YES]]; [poiArray sortUsingDescriptors:sortDescriptors]; NSLog (@"poiArray: %@", poiArray); } Thank you for your help. Best regards,

    Read the article

  • what makes a Tomcat5.5 cannot be "aware" of new Java Web Applications?

    - by Michael Mao
    This is for uni homework, but I reckon it is more a generic problem to the Tomcat Server(version 5.5.27) on my uni. The problem is, I first did a skeleton Java Web Application (Just a simple Servlet and a welcome-file, nothing complicated, no lib included) using NetBeans 6.8 with the bundled Tomcat 6.0.20 (localhost:8084/WSD) Then, to test and prove it is "portable" and "auto-deploy-able", I cleaned and built a WSD.war file and dropped it onto my Xampp Tomcat (localhost:8080/WSD). The war extracted everything accordingly and I can see identical output from this Tomcat. So far, so good. However, after I tried to drop to war onto uni server, funny thing happens: uni server Even though I've changed the war permission to 755, it is simply not "responding". I then copied the extracted files to uni server, the MainServlet cannot be recognized from within its Context Path "/WSD", basically nothing works, expect the static index.jsp. I tried several times to stop and restart uni Tomcat, it doesn't help? I wonder what makes this happen? Is there anything I did wrong with my approach? To be frank I paid no attention to a server not under my control, and I am unfortunately not a real active day-to-day Java Programmer now. I understand the fundamentals of MVC, Servelets, JSPs, JavaBeans, but I really feel frustrated by this, as I cannot see why... Or, should I ask, a Java Web Application, after cleaned and built by NetBeans6.8, is self-contained and self-configured so ready to be deployed to any Java Web Container? I know, I can certainly program everything in plain old JSP, but this is soooo... unacceptable to myself... Update : I am now wondering if there is any free Tomcat Hosting so that I would like to see if my war file and/or my web app can go with them without any configuration at all?

    Read the article

  • Timer takes 10 ms more then interval

    - by Praveen
    Hi All, I am using a timer with interval 50 miliseconds. But in the timer's tick event when I print the time it's always 62 or 65 ms. I don't understand why it's taking 10 ms more. Please can some one have look into this. Here is the code I am using. static int _counter; System.Timers.Timer _timer = new System.Timers.Timer(1000); public Form1() { InitializeComponent(); _timer.Elapsed += new ElapsedEventHandler(_timer_Elapsed); _timer.Start(); } void _timer_Elapsed(object sender, ElapsedEventArgs e) { Console.WriteLine(DateTime.Now.ToString("{hh:mm:ss.fff}")); _counter++; if (_counter == 20) _timer.Stop(); } And this the output: {01:59:08.381} {01:59:09.393} {01:59:10.407} {01:59:11.421} {01:59:12.435} {01:59:13.449} {01:59:14.463} {01:59:15.477} {01:59:16.491} {01:59:17.505} {01:59:18.519} {01:59:19.533} {01:59:20.547} {01:59:21.561} {01:59:22.575} {01:59:23.589} {01:59:24.603} {01:59:25.615} {01:59:26.629} {01:59:27.643}

    Read the article

  • Disable validation in an object in Ruby on Rails

    - by J. Pablo Fernández
    I have an object which whether validation happens or not should depend on a boolean, or in another way, validation is optional. I haven't found a clean way to do it. What I'm currently doing is this (disclaimer: you cannot unsee, leave this page if you are too sensitive): def valid? if perform_validation super else super # Call valid? so that callbacks get called and things like encrypting passwords and generating salt in before_validation actually happen errors.clear # but then clear the errors true # and claim ourselves to be valid. This is super hacky! end end Any better ways? Before you point to the :if argument of many validations, this is for a user model which is using authlogic so it has a lot of validation rules. You can stop reading here if you belive me. If you don't, authlogic already sets some :ifs like: :if => :email_changed? which I have to turn into :if => Proc.new {|user| user.email_changed? and user.perform_validation} and in some other cases, since I'm also using authlogic-oid (OpenID) I just don't have control over the :if, authlogic-oid sets it in a way I cannot change it (in time) without further monkey patching. So I have to override seemingly unrelated functions, catch exceptions if a method doesn't exist, etc. The previous hacky solution if the best of my two attempts.

    Read the article

  • Programming time schedule for porting a program.

    - by Lothar
    I'm working on a large program which has an abstracted GUI API. It is very GUI based, many dialogs and a few nasty features which rely heavily on the message flow of the GUI (correct sequences of focus/mouse/active handling etc.) - not easy to port I now want to port it from the currently used FOX Toolkit to native Cocoa/MFC. I give myself a timeframe until the end of the year but my main work will be to continue development work with the existing toolkit, but there is no planned release for end customers before both tasks are done. My question is how should i spend my time? Stop working on the main program and do a 90% port (about 3 month) of the GUI first Splitting everything into smaller sessions of one month each. Assigning Monday/Tuesday to the GUI project and the rest of the week for the app. Finishing the App first, then port. I think there are three arguments which i need to balance. Motivation, i want to see something going on on both projects Brain Input Overflow, both tasks require a lot of detail information in my brain and sometimes enough is just enough. I guess the porting is intervowen so porting would also require a lot of code changes in the existing code and the new code that will be written in the meantime.

    Read the article

  • Connections hanging on read()

    - by viraptor
    Hi, Short version: I've got a strange issue with a server accepting TCP connections. Even though there are normally some processes waiting, at some volume of connections it hangs. Long version: The server is written in Perl and binds a $srv socket with the reuse flag and listen == 5. Afterwards, it forks into 10 processes with a loop of $clt=$srv->accept(); do_processing($clt); $clt->shutdown(2); The client written in C is also very simple - it sends some lines, then receives all lines available and does a shutdown(sockfd, 2); There's nothing async going on and at the end both send and receive queues are empty (as reported by netstat). Connections last only ~20ms. All clients behave the same way, are the same implementation, etc. Now let's say I'm accepting X connections from client 1 and another X from client 2. Processes still report that they're idle all the time. If I add another X connections from client 3, suddenly the server processes start hanging just after accepting. The first blocking thing they do after accept(); is while (<$clt>) ... - but they don't get any data (on the first try already). Suddenly all 10 processes are in this state and do not stop waiting. On strace, the server processes seem to hang on read(), which makes sense. There are loads of connections in TIME_WAIT state belonging to that server (~100 when the problem starts to manifest), but this might be a red herring. What could be happening here?

    Read the article

  • jQuery's draggable grid

    - by Art
    It looks like that the 'grid' option in the constructor of Draggable is relatively bound to the original coordinates of the element being dragged - so simply put, if you have three draggable divs with their top set respectively to 100, 200, 254 pixels relative to their parent: <div class="parent-div" style="position: relative;"> <div id="div1" class="draggable" style="top: 100px; position: absolute;"></div> <div id="div2" class="draggable" style="top: 200px; position: absolute;"></div> <div id="div3" class="draggable" style="top: 254px; position: absolute;"></div> </div> Adn all of them are getting enabled for dragging with 'grid' set to [1, 100]: draggables = $('.draggable'); $.each(draggables, function(index, elem) { $(elem).draggable({ containment: $('#parent-div'), opacity: 0.7, revert: 'invalid', revertDuration: 300, grid: [1, 100], refreshPositions: true }); }); Problem here is that as soon as you drag div3, say, down, it's top is increased by 100, moving it to 354px instead of being increased by just mere 46px (254 + 46 = 300), which would get it to the next stop in the grid - 300px, if we are looking at the parent-div as a point of reference and "grid holder". I had a look at the draggable sources and it seem to be an in-built flaw - they just do all the calculations relative to the original position of the draggable element. I would like to avoid monkey-patching the code of draggable library and what I am really looking for here is the way how to make the Draggable calculate the grid positions relative to containing parent. However if monkey-patching is unavoidable, I guess I'll have to live with it. Thanks!

    Read the article

  • how to load files in python

    - by Alvaro
    I'm fairly new to python and would like some help on properly loading separate files. My codes purpose is to open a given file, search for customers of that file by the state or state abbreviation. However, i have a separate function to open a separate file where i have (name of state):(state abbreviation) Thanks. def file_state_search(fileid, state): z=0 indx = 0 while z<25: line=fileid.readline() data_list = ("Name:", "Address:", "City:", "State:", "Zipcode:") line_split = line.split(":") if state in line: while indx<5: print data_list[indx], line_split[indx] indx = indx + 1 elif state not in line: z = z + 1 def state_convert(fileid, state): line2=in_file2.readline() while state in line2: print line2 x=1 while x==1: print "Choose an option:" print print "Option '1': Search Record By State" print option = raw_input("Enter an option:") print if option == "1": state = raw_input("Enter A State:") in_file = open("AdrData.txt", 'r') line=in_file.readline() print in_file2 = open("States.txt", 'r') line2=in_file2.readline() converted_state = state_convert(in_file2, state) print converted_state state_find = file_state_search(in_file, state) print state_find x=raw_input("Enter '1' to continue, Enter '2' to stop: ") x=int(x) By the way, my first import statement works, for whatever reason my second one doesn't. Edit: My question is, what am i doing wrong in my state_convert function.

    Read the article

  • Why is debugging better in an IDE?

    - by Bill Karwin
    I've been a software developer for over twenty years, programming in C, Perl, SQL, Java, PHP, JavaScript, and recently Python. I've never had a problem I could not debug using some careful thought, and well-placed debugging print statements. I respect that many people say that my techniques are primitive, and using a real debugger in an IDE is much better. Yet from my observation, IDE users don't appear to debug faster or more successfully than I can, using my stone knives and bear skins. I'm sincerely open to learning the right tools, I've just never been shown a compelling advantage to using visual debuggers. Moreover, I have never read a tutorial or book that showed how to debug effectively using an IDE, beyond the basics of how to set breakpoints and display the contents of variables. What am I missing? What makes IDE debugging tools so much more effective than thoughtful use of diagnostic print statements? Can you suggest resources (tutorials, books, screencasts) that show the finer techniques of IDE debugging? Sweet answers! Thanks much to everyone for taking the time. Very illuminating. I voted up many, and voted none down. Some notable points: Debuggers can help me do ad hoc inspection or alteration of variables, code, or any other aspect of the runtime environment, whereas manual debugging requires me to stop, edit, and re-execute the application (possibly requiring recompilation). Debuggers can attach to a running process or use a crash dump, whereas with manual debugging, "steps to reproduce" a defect are necessary. Debuggers can display complex data structures, multi-threaded environments, or full runtime stacks easily and in a more readable manner. Debuggers offer many ways to reduce the time and repetitive work to do almost any debugging tasks. Visual debuggers and console debuggers are both useful, and have many features in common. A visual debugger integrated into an IDE also gives you convenient access to smart editing and all the other features of the IDE, in a single integrated development environment (hence the name).

    Read the article

  • EF/LINQ: Where() against a property of a subtype

    - by ladenedge
    I have a set of POCOs, all of which implement the following simple interface: interface IIdObject { int Id { get; set; } } A subset of these POCOs implement this additional interface: interface IDeletableObject : IIdObject { bool IsDeleted { get; set; } } I have a repository hierarchy that looks something like this: IRepository<T <: BasicRepository<T <: ValidatingRepository<T (where T is IIdObject) I'm trying to add a FilteringRepository to the hierarchy such that all of the POCOs that implement IDeletableObject have a Where(p => p.IsDeleted == false) filter applied before any other queries take place. My goal is to avoid duplicating the hierarchy solely for IDeletableObjects. My first attempt looked like this: public override IQueryable<T> Query() { return base.Query().Where(t => ((IDeletableObject)t).IsDeleted == false); } This works well with LINQ to Objects, but when I switch to an EF backend I get: "LINQ to Entities only supports casting Entity Data Model primitive types." I went on to try some fancier parameterized solutions, but they ultimately failed because I couldn't make T covariant in the following case for some reason I don't quite understand: interface IQueryFilter<out T> // error { Expression<Func<T, bool>> GetFilter(); } I'd be happy to go into more detail on my more complicated solutions if it would help, but I think I'll stop here for now in hope that someone might have an idea for me to try. Thanks very much in advance!

    Read the article

  • Optimizing an embedded SELECT query in mySQL

    - by Crazy Serb
    Ok, here's a query that I am running right now on a table that has 45,000 records and is 65MB in size... and is just about to get bigger and bigger (so I gotta think of the future performance as well here): SELECT count(payment_id) as signup_count, sum(amount) as signup_amount FROM payments p WHERE tm_completed BETWEEN '2009-05-01' AND '2009-05-30' AND completed > 0 AND tm_completed IS NOT NULL AND member_id NOT IN (SELECT p2.member_id FROM payments p2 WHERE p2.completed=1 AND p2.tm_completed < '2009-05-01' AND p2.tm_completed IS NOT NULL GROUP BY p2.member_id) And as you might or might not imagine - it chokes the mysql server to a standstill... What it does is - it simply pulls the number of new users who signed up, have at least one "completed" payment, tm_completed is not empty (as it is only populated for completed payments), and (the embedded Select) that member has never had a "completed" payment before - meaning he's a new member (just because the system does rebills and whatnot, and this is the only way to sort of differentiate between an existing member who just got rebilled and a new member who got billed for the first time). Now, is there any possible way to optimize this query to use less resources or something, and to stop taking my mysql resources down on their knees...? Am I missing any info to clarify this any further? Let me know... EDIT: Here are the indexes already on that table: PRIMARY PRIMARY 46757 payment_id member_id INDEX 23378 member_id payer_id INDEX 11689 payer_id coupon_id INDEX 1 coupon_id tm_added INDEX 46757 tm_added, product_id tm_completed INDEX 46757 tm_completed, product_id

    Read the article

  • Matab - Trace contour line between two different points

    - by Graham
    Hi, I have a set of points represented as a 2 row by n column matrix. These points make up a connected boundary or edge. I require a function that traces this contour from a start point P1 and stop at an end point P2. It also needs to be able trace the contour in a clockwise or anti-clockwise direction. I was wondering if this can be achieved by using some of matlabs functions. I have tried to write my own function but this was riddled with bugs and I have also tried using bwtraceboundary and indexing however this has problematic results as the points within the matrix are not in the order that create the contour. Thank you in advance for any help. Btw, I have included a link to a plot of the set of points. It is half the outline of a hand. The function would ideally trace the contour from ether the red star to the green triangle. Returning the points in order of traversal.

    Read the article

  • Read a specific range of lines from a file using c

    - by James Joy
    I have the following content in a file: hhasfghgsafjgfhgfhjf gashghfdgdfhgfhjasgfgfhsgfjdg jfshafghgfgfhfsghfgffsjgfj . . . . . startread hajshjsfhajfhjkashfjf hasjgfhgHGASFHGSHF hsafghfsaghgf . . . . . stopread . . . . . . jsfjhfhjgfsjhfgjhsajhdsa jhasjhsdabjhsagshaasgjasdhjk jkdsdsahghjdashjsfahjfsd I need to read the lines from the next line of startread till the previous line of stopread using a c code and store it to a string variable(of course with a \n for every line breaks). How can i achieve this? I have used fgets(line,sizeof(line),file); but it starts reading from the beginning. I don't have the exact line number to start and stop reading since the file is written by another C code. But there are these identifiers startread and stopread to identify whereto start reading. Operating platform is linux. Thanks in advance.

    Read the article

  • MSSQL: Views that use SELECT * need to be recreated if the underlying table changes

    - by cbp
    Is there a way to make views that use SELECT * stay in sync with the underlying table. What I have discovered is that if changes are made to the underlying table, from which all columns are to be selected, the view needs to be 'recreated'. This can be achieved simly by running an ALTER VIEW statement. However this can lead to some pretty dangerous situations. If you forgot to recreate the view, it will not be returning the correct data. In fact it can be returning seriously messed up data - with the names of the columns all wrong and out of order. Nothing will pick up that the view is wrong unless you happened to have it covered by a test, or a data integrity check fails. For example, Red Gate SQL Compare doesn't pick up the fact that the view needs to be recreated. To replicate the problem, try these statements: CREATE TABLE Foobar (Bar varchar(20)) CREATE VIEW v_Foobar AS SELECT * FROM Foobar INSERT INTO Foobar (Bar) VALUES ('Hi there') SELECT * FROM v_Foobar ALTER TABLE Foobar ADD Baz varchar(20) SELECT * FROM v_Foobar DROP VIEW v_Foobar DROP TABLE Foobar I am tempted to stop using SELECT * in views, which will be a PITA. Is there a setting somewhere perhaps that could fix this behaviour?

    Read the article

  • Stopping/Removing an embedded player.

    - by Rajat
    Hi, I am working on a webpage where i have to include an embedded video.The video is hosted on some other domain.I am able to embed the video and autoplay once the web page is loaded.However i have a requirement where i have to remove the div displaying the video once it is played , and in place of the video i have to now display some text. The problem is i am able to do autoplay by the autostart variable in the embed tag...but how do i know that the video has ended.The hosting company only provides an embed tag and they donot have any player apis to use. One way (or rather a workaround) that i feel is to start a eventlistener in the background and see for the total time of the video and when that time is reached remove the content.But the problem is what if the user pauses the video, then also the div would be deleted. I am new to flash.Are there some standard variables or actions that we can pass as flashvars to a swf file to stop a running player or to know the state of the player (Note we are only getting an embed tag from the video hosting site so we donot own that code and they donot have much documenation to help me out with the code). Thanks for your help.

    Read the article

  • AnyCPU/x86/x64 for C# application and it's C++/CLI dependency

    - by Soonts
    I'm Windows developer, I'm using Microsoft visual studio 2008 SP1. My developer machine is 64 bit. The software I'm currently working on is managed .exe written in C#. Unfortunately, I was unable to solve the whole problem solely in C#. That's why I also developed a small managed DLL in C++/CLI. Both projects are in the same solution. My C# .exe build target is "Any CPU". When my C++ DLL build target is "x86", the DLL is not loaded. As far as I understood when I googled, the reason is C++/CLI language, unlike other .NET languages, compiles to the native code, not managed code. I switched the C++ DLL build target to x64, and everything works now. However, AFAIK everything will stop working as soon as my client will install my product on a 32-bit OS. I have to support Windows Vista and 7, both 32 and 64 bit versions of each of them. I don't want to fall back to 32 bits. That 250 lines of C++ code in my DLL is only 2% of my codebase. And that DLL is only used in several places, so in the typical usage scenario it's not even loaded. My DLL implements two COM objects with ATL, so I can't use "/clr:safe" project setting. Is there way to configure the solution and the projects so that C# project builds "Any CPU" version, the C++ project builds both 32 bit and 64 bit versions, then in the runtime when the managed .EXE is starting up, it uses either 32-bit DLL or 64-bit DLL depending on the OS? Or maybe there's some better solution I'm not aware of? Thanks in advance!

    Read the article

  • What could cause xmlrpclib.ResponseError: ResponseError() ?

    - by Tom
    Hi, I am experimenting with XML-RPC. I have the following server script (python): from SimpleXMLRPCServer import SimpleXMLRPCServer server = SimpleXMLRPCServer(('localhost', 9000)) def return_input(someinput): return someinput server.register_function(return_input) try: print 'ctrl-c to stop server' server.serve_forever() except KeyboardInterrupt: print 'stopping' and the following client script: import xmlrpclib server = xmlrpclib.ServerProxy('http://www.example.com/pathto/xmlrpcTester2.py') print server.return_input('some input') I have tested this locally and it works fine. All it does it spit out the input fron the client script, which is right. However, when I try to do it on a remote server I get the following error: Traceback (most recent call last): File "client.py", line 4, in <module> print server.return_input('some input') File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/xmlrpclib.py", line 1199, in __call__ return self.__send(self.__name, args) File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/xmlrpclib.py", line 1489, in __request verbose=self.__verbose File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/xmlrpclib.py", line 1253, in request return self._parse_response(h.getfile(), sock) File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/xmlrpclib.py", line 1392, in _parse_response return u.close() File "/System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/xmlrpclib.py", line 836, in close raise ResponseError() xmlrpclib.ResponseError: ResponseError() Any ideas what could cause this? Thanks in advance for your help.

    Read the article

  • How do I get my Flash CS4 buttons to direct the user to another URL?

    - by goldenfeelings
    My apologies if this has been fully addressed before, but I've read through several other threads and still can't seem to get my file to work. My actionscript code is at the bottom of this message. I created it using instructions from the Adobe website: http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9b90204-7fd7.html I believe I have all of my objects set to the correct type of symbol (button) and all of my instances are named appropriately (see screenshot here: www.footprintsfamilyphoto.com/wp-content/themes/Footprints/images/flash_buttonissue.jpg) Action Script here. Let me know if you have suggestions! (Note: I am very new to Flash): stop (); function families(event:MouseEvent):void { var targetURL:URLRequest = new URLRequest("http://www.footprintsfamilyphoto.com/portfolio/families"); navigateToURL(targetURL); } bc_btn1.addEventListener(MouseEvent.CLICK, families); bc_btn2.addEventListener(MouseEvent.CLICK, families); function families(event:MouseEvent):void { var targetURL:URLRequest = new URLRequest("http://www.footprintsfamilyphoto.com/portfolio/families"); navigateToURL(targetURL); } f_btn1.addEventListener(MouseEvent.CLICK, families); f_btn2.addEventListener(MouseEvent.CLICK, families); function families(event:MouseEvent):void { var targetURL:URLRequest = new URLRequest("http://www.footprintsfamilyphoto.com/portfolio/families"); navigateToURL(targetURL); } cw_btn1.addEventListener(MouseEvent.CLICK, families); cw_btn2.addEventListener(MouseEvent.CLICK, families);

    Read the article

  • JMeter CSV Data Set is corrupting Japanese strings stored as proper UTF-8, I get Question Marks instead

    - by Mark Bennett
    I read in search terms from a simple text file to send to a search engine. It works fine in English, but gives me ???? for any Japanese text. Text with mixed English and Japanese does show the English text, so I know it's reading it. What I'm seeing: Input text: Snow Leopard ??????????????? Turns into: Snow Leopard ??????????????? This is in my POST field of an HTTP. If I set JMeter to encode the data, it just puts in the percent sequence for question marks. Interesting note: In the example above there are 15 Japanese characters, and then 15 question marks, so at some point it's being seen as full characters and not just bytes. About the Data: The CSV file is very simple in structure. There's only one field / one column, which I name TERM, and later use as ${TERM} I don't really need full CSV because it's only one string per line. There's no commas or quotes. When I run the Unix "file" command on the file, it says UTF-8 text. I've also verified it in command line and graphical mode on two machines. JMeter CSV Dataset Config: Filename: japanese-searches.csv File encoding: UTF-8 (also tried without) Variable names: TERM Delimiter: , Allow Quoted Data: False (I also tried True, different, but still wrong) Recycle at EOF: True Stop at EOF: False Staring mode: All threads A few things I've tried: Tried Allow quoted Data. It changed to other strange characters. -Dfile.encoding=UTF-8 Tried encoding the POST, but it just turned into a bunch of %nn for question marks And I'm not sure how "debug" just after the each line of the CSV is read in. I think it's corrupted right away, but I'm not sure. If it's only mangled when I reference it, then instead of ${TERM} perhaps there's some other "to bytes" function call. I'll start checking into that. I haven't done anything with the JMeter functions yet.

    Read the article

  • edmx - The operation could not be completed - When adding Inheritance

    - by vdh_ant
    Hey guys I have an edmx model which I have draged 2 tables onto - One called 'File' and the other 'ApplicaitonFile'. These two tables have a 1 to 1 relationship in the database. If I stop here everything works fine. But in my model, I want 'ApplicaitonFile' to inherit from 'File'. So I delete the 1 to 1 relationship then configure 'ApplicaitonFile' from 'File' and then remove the FileId from 'ApplicaitonFile' which was the primary key. (Note I am following the instructions from here). If I leave the model open at this point everything is fine, but as soon as I close it, if I try and reopen it again I get the following error "The operation could not be completed". I have been searching for a solution and found this - http://stackoverflow.com/questions/944050/entity-model-does-not-load but as far as I can tell I don't have a duplicate InheritanceConnectors (although I don't know exactly what I'm looking for but I can't see anything out of the ordinary - like 2 connectors with the same name) and the relationship I originally have is a 1 to 1 not a 1 to 0..1 Any ideas??? this is driving me crazy...

    Read the article

  • Do database engines other than SQL Server behave this way?

    - by Yishai
    I have a stored procedure that goes something like this (pseudo code) storedprocedure param1, param2, param3, param4 begin if (param4 = 'Y') begin select * from SOME_VIEW order by somecolumn end else if (param1 is null) begin select * from SOME_VIEW where (param2 is null or param2 = SOME_VIEW.Somecolumn2) and (param3 is null or param3 = SOME_VIEW.SomeColumn3) order by somecolumn end else select somethingcompletelydifferent end All ran well for a long time. Suddenly, the query started running forever if param4 was 'Y'. Changing the code to this: storedprocedure param1, param2, param3, param4 begin if (param4 = 'Y') begin set param2 = null set param3 = null end if (param1 is null) begin select * from SOME_VIEW where (param2 is null or param2 = SOME_VIEW.Somecolumn2) and (param3 is null or param3 = SOME_VIEW.SomeColumn3) order by somecolumn end else select somethingcompletelydifferent And it runs again within expected parameters (15 seconds or so for 40,000+ records). This is with SQL Server 2005. The gist of my question is this particular "feature" specific to SQL Server, or is this a common feature among RDBMS' in general that: Queries that ran fine for two years just stop working as the data grows. The "new" execution plan destroys the ability of the database server to execute the query even though a logically equivalent alternative runs just fine? This may seem like a rant against SQL Server, and I suppose to some degree it is, but I really do want to know if others experience this kind of reality with Oracle, DB2 or any other RDBMS. Although I have some experience with others, I have only seen this kind of volume and complexity on SQL Server, so I'm curious if others with large complex databases have similar experience in other products.

    Read the article

  • NSTimer Reset Not Working

    - by user355900
    hi, i have a nstimer and it works perfectly counting down from 2:00 but when i hit the reset button it does not work it just stops the timer and when i press start again it will carry on with the timer as if it had never been stopped. Here is my code `@implementation TimerAppDelegate @synthesize window; (void)applicationDidFinishLaunching:(UIApplication *)application { timerLabel.text = @"2:00"; seconds = 120; // Override point for customization after application launch [window makeKeyAndVisible]; } (void)viewDidLoad { [timer invalidate]; } (void)countDownOneSecond { seconds--; int currentTime = [timerLabel.text intValue]; int newTime = currentTime - 1; int displaySeconds = !(seconds % 60) ? 0 : seconds < 60 ? seconds : seconds - 60; int displayMinutes = floor(seconds / 60); NSString *time = [NSString stringWithFormat:@"%d:%@%d", displayMinutes, [[NSString stringWithFormat:@"%d", displaySeconds] length] == 1 ? @"0" : @"", displaySeconds ]; timerLabel.text = time; if(seconds == 0) { [timer invalidate]; } } (void)startOrStopTimer { if(timerIsRunning){ [timer invalidate]; [startOrStopButton setTitle:@"Start" forState:UIControlStateNormal]; } else { timer = [[NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(countDownOneSecond) userInfo:nil repeats:YES] retain]; [startOrStopButton setTitle:@"Stop" forState:UIControlStateNormal]; } timerIsRunning = !timerIsRunning; } (void)resetTimer { [timer invalidate]; [startOrStopButton setTitle:@"Start" forState:UIControlStateNormal]; [timer invalidate]; timerLabel.text = @"2:00"; } (void)dealloc { [window release]; [super dealloc]; } @end` thanks

    Read the article

  • Python modules not updating after restarting the main module.

    - by Ian
    I've recently come back to a project having had to stop for about 6 months, and after reinstalling my operating system and coming back to it I'm having all kinds of crazy things happen. I made sure to install the same version(2.6) of python that I was using before. It started by giving me strange tkinter error that I hadn't had trouble with before, the program is relatively simple and the 2 or 3 bugs that were left when i quit, I had documented and weren't related to the interface. Things got even weirder when the same error would pop up even after I had removed the offending section of code. In fact, the traceback pointed to a line that didn't even exist in the module it was referencing, eg: line 262 when the module was only 200 lines long. After just starting a completely new file for the main module and copy/pasting it finally recognized that the offending code was gone and I stopped getting the error only to find that any updates to the code I made in another module didn't show up when I restarted the program through the shell. (I didn't forget to save.) After fiddling with this, of course, the old interface error came back, only in a different section of code that had been working previously. In fact, if I revert back to the files I had six months ago, the program works fine. As soon as I change anything in the main module, however, the interface bug comes back. Here's the original error: Exception in Tkinter callback Traceback (most recent call last): File "C:\Python26\lib\lib-tk\Tkinter.py", line 1410, in __call__ return self.func(*args) File "C:\PyStuff\interface.py", line 202, in dispOne __main__.top.destroy() File "C:\Python26\lib\lib-tk\Tkinter.py", line 1938, in destroy self.tk.call('destroy', self._w) TclError: can't invoke "destroy" command: application has been destroyed I'm guessing something else is going on here other than my own poor programming. Anyone have any ideas?

    Read the article

  • Full Text Search like Google

    - by Eduardo
    I would like to implement full-text-search in my off-line (android) application to search the user generated list of notes. I would like it to behave just like Google (since most people are already used to querying to Google) My initial requirements are: Fast: like Google or as fast as possible, having 100000 documents with 200 hundred words each. Searching for two words should only return documents that contain both words (not just one word) (unless the OR operator is used) Case insensitive (aka: normalization): If I have the word 'Hello' and I search for 'hello' it should match. Diacritical mark insensitive: If I have the word 'así' a search for 'asi' should match. In Spanish, many people, incorrectly, either do not put diacritical marks or fail in correctly putting them. Stop word elimination: To not have a huge index meaningless words like 'and', 'the' or 'for' should not be indexed at all. Dictionary substitution (aka: stem words): Similar words should be indexed as one. For example, instances of 'hungrily' and 'hungry' should be replaced with 'hunger'. Phrase search: If I have the text 'Hello world!' a search of '"world hello"' should not match it but a search of '"hello world"' should match. Search all fields (in multifield documents) if no field specified (not just a default field) Auto-completion in search results while typing to give popular searches. (just like Google Suggest) How may I configure a full-text-search engine to behave as much as possible as Google? (I am mostly interested in Open Source, Java and in particular Lucene)

    Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >