Search Results

Search found 22623 results on 905 pages for 'base address'.

Page 28/905 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Pluscom MAC address shows up but "wireless unavailable"

  - by Luigi

  I've got a pluscom pci card plugged into my desktop and although the mac address shows up in network manager, it says "Wireless unavailable". I'm using Ubuntu 12.10 Gnome Shell Remix... edgar@edgarQuantal:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off edgar@edgarQuantal:~$ ifconfig eth0 Link encap:Ethernet HWaddr 6c:f0:49:02:1f:b8 inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fe02:1fb8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1425 errors:0 dropped:0 overruns:0 frame:0 TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:995753 (995.7 KB) TX bytes:134079 (134.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:363 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:40828 (40.8 KB) TX bytes:40828 (40.8 KB) It looks the same as the problem as here, seems quite complicated: http://ubuntuforums.org/showthread.php?t=1993226 Tried downloading the driver but i get this: "Unpacking firmware-ralink (from .../firmware-ralink_0.36_all.deb) ... dpkg: error processing /home/edgar/Downloads/firmware-ralink_0.36_all.deb (--install): trying to overwrite '/lib/firmware/rt2870.bin', which is also in package linux-firmware 1.95"

  Read the article

• 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

  - by DarkIron112

  Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

  Read the article

• Postfix: LDAP not working (warning: dict_ldap_lookup: Search base not found: 32: No such object)

  - by Heinzi

  I set up LDAP access with postfix. ldapsearch -D "cn=postfix,ou=users,ou=system,[domain]" -w postfix -b "ou=users,ou=people,[domain]" -s sub "(&(objectclass=inetOrgPerson)(mail=[mailaddr]))" delivers the correct entry. The LDAP config file looks like root@server2:/etc/postfix/ldap# cat mailbox_maps.cf server_host = localhost search_base = ou=users,ou=people,[domain] scope = sub bind = yes bind_dn = cn=postfix,ou=users,ou=system,[domain] bind_pw = postfix query_filter = (&(objectclass=inetOrgPerson)(mail=%s)) result_attribute = uid debug_level = 2 The bind_dn and bind_pw should be the same as I used above with ldapsearch. Nevertheless, calling postmap doesn't work: root@server2:/etc/postfix/ldap# postmap -q [mailaddr] ldap:/etc/postfix/ldap/mailbox_maps.cf postmap: warning: dict_ldap_lookup: /etc/postfix/ldap/mailbox_maps.cf: Search base 'ou=users,ou=people,[domain]' not found: 32: No such object If I change LDAP configuration, so that anonymous users have complete access to LDAP olcAccess: {-1}to * by * read then it works: root@server2:/etc/postfix/ldap# postmap -q [mailaddr] ldap:/etc/postfix/ldap/mailbox_maps.cf [user-id] But when I restrict this access to the postfix user: olcAccess: {-1}to * by dn="cn=postfix,ou=users,ou=system,[domain]" read by * break it doesn't work but produces the error printed above (although ldapsearch works, only postmap doesn't). Why doesn't it work when binding with a postfix DN? I think I set up the LDAP ACL for the postfix user correctly, as the ldapsearch command should prove. What can be the reason for this behaviour?

  Read the article

• tomcat 'document base does not exist' error (but it does)

  - by SpliFF

  Gentoo / Tomcat 6 INFO: Starting Servlet Engine: Apache Tomcat/6.0.20 Sep 8, 2009 10:34:51 AM org.apache.catalina.core.StandardContext resourcesStart SEVERE: Error starting static Resources java.lang.IllegalArgumentException: Document base /www/rivervalley/site does not exist or is not a readable directory at org.apache.naming.resources.FileDirContext.setDocBase(Unknown Source) at org.apache.catalina.core.StandardContext.resourcesStart(Unknown Source) at org.apache.catalina.core.StandardContext.start(Unknown Source) at org.apache.catalina.core.ContainerBase.start(Unknown Source) at org.apache.catalina.core.StandardHost.start(Unknown Source) at org.apache.catalina.core.ContainerBase.start(Unknown Source) oh really? then how come: ls -la /www/rivervalley/site/ drwxr-xr-x 12 tomcat tomcat 4096 Sep 8 09:56 . drwxr-xr-x 16 tomcat tomcat 4096 Jun 29 16:22 .. -rwxr--r-- 1 tomcat tomcat 520 Jul 3 02:15 Application.cfm drwxr-xr-x 2 tomcat tomcat 4096 Sep 8 09:56 WEB-INF and ... tomcat 18916 1.0 5.5 1159188 167892 ? Ssl 10:37 0:11 /opt/sun-jdk-1.5.0.18/bin/java -Djava.util.loggin Hell, ANY account can read that directory so the claim is utter nonsense. What else can cause this? Here's my relevant server.xml section: <Host name="rivervalley" appBase="webapps" unpackWARs="false" autoDeploy="false" xmlValidation="false" xmlNamespaceAware="false"> <Context path="" docBase="/www/rivervalley/site" /> </Host>

  Read the article

• building a debian base image

  - by Michael

  Is there a preferred way to create base images for Debian-based customized installations? We are currently going with multistrap but although it's better than hand-crafted chroot stuff, it still has a lot of edges and corners. Is there a more reliable and less error-prone way to produce a root filesystem of a Debian installation with some additional .debs installed? (I don't want to send out a Debian installer with a preseed file though.) Addendum 1: To clarify things a bit: We are delivering some kind of software appliance to our customers. That is, a debian operating system, with some additional software packages -- both our own and third-party ones -- and some configuration changes. To ease the installation process, we have an installer that does nothing more than partitioning, copying files to the partitions and setting up grub. So it's basically an image-based installer. So we are basically running the debian installation ourselves and just distribute the already installed operating system. The question is about the installation part. I want to have that as easy and robust as possible, and of course, it should be an automated process.

  Read the article

• runtime error: invalid memory address or nil pointer dereference

  - by Klink

  I want to learn OpenGL 3.0 with golang. But when i try to compile some code, i get many errors. package main import ( "os" //"errors" "fmt" //gl "github.com/chsc/gogl/gl33" //"github.com/jteeuwen/glfw" "github.com/go-gl/gl" "github.com/go-gl/glfw" "runtime" "time" ) var ( width int = 640 height int = 480 ) var ( points = []float32{0.0, 0.8, -0.8, -0.8, 0.8, -0.8} ) func initScene() { gl.Init() gl.ClearColor(0.0, 0.5, 1.0, 1.0) gl.Enable(gl.CULL_FACE) gl.Viewport(0, 0, 800, 600) } func glfwInitWindowContext() { if err := glfw.Init(); err != nil { fmt.Fprintf(os.Stderr, "glfw_Init: %s\n", err) glfw.Terminate() } glfw.OpenWindowHint(glfw.FsaaSamples, 1) glfw.OpenWindowHint(glfw.WindowNoResize, 1) if err := glfw.OpenWindow(width, height, 0, 0, 0, 0, 32, 0, glfw.Windowed); err != nil { fmt.Fprintf(os.Stderr, "glfw_Window: %s\n", err) glfw.CloseWindow() } glfw.SetSwapInterval(1) glfw.SetWindowTitle("Title") } func drawScene() { for glfw.WindowParam(glfw.Opened) == 1 { gl.Clear(gl.COLOR_BUFFER_BIT) vertexShaderSrc := `#version 120 attribute vec2 coord2d; void main(void) { gl_Position = vec4(coord2d, 0.0, 1.0); }` vertexShader := gl.CreateShader(gl.VERTEX_SHADER) vertexShader.Source(vertexShaderSrc) vertexShader.Compile() fragmentShaderSrc := `#version 120 void main(void) { gl_FragColor[0] = 0.0; gl_FragColor[1] = 0.0; gl_FragColor[2] = 1.0; }` fragmentShader := gl.CreateShader(gl.FRAGMENT_SHADER) fragmentShader.Source(fragmentShaderSrc) fragmentShader.Compile() program := gl.CreateProgram() program.AttachShader(vertexShader) program.AttachShader(fragmentShader) program.Link() attribute_coord2d := program.GetAttribLocation("coord2d") program.Use() //attribute_coord2d.AttribPointer(size, typ, normalized, stride, pointer) attribute_coord2d.EnableArray() attribute_coord2d.AttribPointer(0, 3, false, 0, &(points[0])) //gl.DrawArrays(gl.TRIANGLES, 0, len(points)) gl.DrawArrays(gl.TRIANGLES, 0, 3) glfw.SwapBuffers() inputHandler() time.Sleep(100 * time.Millisecond) } } func inputHandler() { glfw.Enable(glfw.StickyKeys) if glfw.Key(glfw.KeyEsc) == glfw.KeyPress { //gl.DeleteBuffers(2, &uiVBO[0]) glfw.Terminate() } if glfw.Key(glfw.KeyF2) == glfw.KeyPress { glfw.SetWindowTitle("Title2") fmt.Println("Changed to 'Title2'") fmt.Println(len(points)) } if glfw.Key(glfw.KeyF1) == glfw.KeyPress { glfw.SetWindowTitle("Title1") fmt.Println("Changed to 'Title1'") } } func main() { runtime.LockOSThread() glfwInitWindowContext() initScene() drawScene() } And after that: panic: runtime error: invalid memory address or nil pointer dereference [signal 0xb code=0x1 addr=0x0 pc=0x41bc6f74] goroutine 1 [syscall]: github.com/go-gl/gl._Cfunc_glDrawArrays(0x4, 0x7f8500000003) /tmp/go-build463568685/github.com/go-gl/gl/_obj/_cgo_defun.c:610 +0x2f github.com/go-gl/gl.DrawArrays(0x4, 0x3, 0x0, 0x45bd70) /tmp/go-build463568685/github.com/go-gl/gl/_obj/gl.cgo1.go:1922 +0x33 main.drawScene() /home/klink/Dev/Go/gogl/gopher/exper.go:85 +0x1e6 main.main() /home/klink/Dev/Go/gogl/gopher/exper.go:116 +0x27 goroutine 2 [syscall]: created by runtime.main /build/buildd/golang-1/src/pkg/runtime/proc.c:221 exit status 2

  Read the article

• Googlemail users can't email my email address

  - by Jack W-H

  Hi folks I have a GridServer account at MediaTemple. The address linked up to my MT account is [email protected]. My non-Google email address could email [email protected] just fine. But when my friend tried to email it from his gmail address, he got the following message: From: Mail Delivery Subsystem Date: Thu, Apr 15, 2010 at 12:02 PM Subject: Delivery Status Notification (Failure) To: [email protected] Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 relay not permitted (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.231.205.139 with HTTP; Thu, 15 Apr 2010 12:02:26 -0700 (PDT) In-Reply-To: <[email protected] References: <[email protected] Date: Thu, 15 Apr 2010 12:02:26 -0700 Received: by 10.231.169.144 with SMTP id z16mr211585iby.25.1271358147047; Thu, 15 Apr 2010 12:02:27 -0700 (PDT) Message-ID: Subject: Re: Hi Friend From: My Friend To: "[email protected]" Content-Type: multipart/alternative; boundary=0016e6d26c5abcb2a704844b22bf Does this work. Does this work. Does this work? On Thu, Apr 15, 2010 at 11:30 AM, [email protected] wrote: Hi Friend. Just testing the email address I set up for My Site. Could you please reply so I can check if it's working OK? Cheers Jack I thought it was just a fluke, but exactly the same thing happens when I use MY Gmail address that I also have. Can anyone shed some light on the problem? Jack

  Read the article

• Override the bounce recipient address in exim4

  - by jerhinesmith

  I have a small app that allows a user to share an item by generating an email to a supplied email address. We set the "from" and "reply to" values to be the sender's address, so that when the email reaches the recipient, it appears to have come from the sender. This works wonderfully except when an email gets bounced. Currently, on bounces, exim attempts to redeliver the message periodically while simultaneously sending error emails back to the sender. I'd rather have those emails basically routed to an empty mailbox somewhere as there's nothing really that the sender can do about it. I found some documentation on bounced emails here: http://www.exim.org/exim-html-4.67/doc/html/spec_html/ch46.html and it claims that "Exim sends a message to the original sender, or to an alternative configured address.", but it doesn't say exactly how to configure an alternative address. Ideas?

  Read the article

• Why is casting Derived** to Base*const* forbidden ?

  - by smerlin

  After reading this question, i saw the answer by Naveen containing a link to this page, which basically says, that casting from Derived** to Base** is forbidden since could change a pointer to an pointer to a Derived1 object point to a pointer to a Derived2 object (like: *derived1PtrPtr=derived2Ptr). OK, i understand this is evil ... But when casting Derived** to Base*const* this is not even possible, so whats the reason that this is not allowed anyway ?

  Read the article

• VMWare Network bug in multiple VMWare Workstation versions if using a hardcoded IP address

  - by onyxruby

  I'm having a very tricky problem with some of my VM sessions being unable to reach the Internet or even ping the gateway. I have just set up a new VM Workstation (7) on a W2K8 64bit server (I'll be converting to ESXI 4 once I can find a decent book on it, so for the meanwhile I use workstation). I have imported a number of VM's and setup some new ones on the server.In short the problem with some of the VM's being unable to reach the Internet is that they can't reach the gateway. I've looking at a number of things and can pretty safely rule out the following: Switch, Router, DHCP Server, DNS, Client IP configuration, Routes and typos. The problem is that some of the new clients cannot reach the gateway if their IP address is hardcoded, they can't even ping it by IP address. That rules out DNS and DHCP. Now, if I allow them to get their IP address by DHCP they can reach the gateway and Internet without issue. The interesting thing on this, is that this behavior occurs even if I leave the DNS information hardcoded under TCP/IP settings. It doesn't work unless the IP and gateway are handed out by DHCP even though the same information IP info is being used by the host. Fundamentally from the standpoint of the clients, they are trying to reach the exact same gateway using the exact same IP information regardless of whether they are hardcoded or assigned by DHCP. Here's an example of one client. IP Address 192.168.7.66 - Subnet Mask 255.255.255.0 - Gateway 192.168.7.254 - DNS1 192.168.7.44 - DNS2 192.168.7.254. The issue occurs across six different microsoft operating systems, Windows 7 and Windows 2008 variants all have the issue. My W2K3, XP, Vista and W98 clients all work without issue with hardcoded IP addresses. I have tried things like rearranging the DNS order, flushing DNS and so on. It's not a routing or switch issue as the clients can work just fine if they get their IP by DHCP. It's not a paramater issue as the exact same paramaters are handed out by DHCP as I plug in by hand. It's not a DNS issue as clients cant reach other clients even with IP addresses only. I have run a tracert to the gateway by IP address and it times out on the very first hop before failing on hop3 with destination host unreachable. If I get the IP address by DHCP the tracert finds the gateway (and Internet) without issue. I have read a few other posts online in forums talking about this problem randomly occuring over the years in other VM versions as well, so I suspect some kind of long standing bug. Does anyone have any ideas on this? Is it possibly a bug with Windows 7 and W2K clients under VM?

  Read the article

• Exchange 2007 : Display the email address a sender used instead of the account friendly name

  - by Dragouf

  In exchange server 2007 when I receive a mail detinate to an alternate email address it just display friendlyName of the account in the To field but i'd like to see the email address it destinated. A screenshot to better se what I speak about : Like you see, "To" field ("A" in the screenshot) always display Exchange Account it was destinated and so i can't know which email address it was sent to....

  Read the article

• [NAnt] About "nant::get-base-directory()"

  - by Nam Gi VU

  As in http://nant.sourceforge.net/release/latest/help/functions/nant.get-base-directory.html, they explaint the meaning of this function is: The base directory of the appdomain in which NAnt is running. I don't know what does appdomain mean! Someone please explain it for me. Thank you.

  Read the article

• Routing based on source address in Windows Server 2008 R2

  - by rocku

  Hi, I'm implementing a direct routing load balanced solution using Windows Server 2008 R2 as back-end server. I've configured a loopback interface with the external IP address. This works, I am receiving packets with the external IP address and respond to them appropriately. However our infrastructure requires that traffic which is being load-balanced should go through a different gateway then any other traffic originating from the server, ie. updates etc. So basicly I need to route packets based on source address (external IP) to another gateway. The built-in Windows 'route' command allows routing based on destination address only. I've tried setting a default gateway on the loopback interface and mangled with weak/strong host send/receive parameters on the interfaces, however this didn't work. Is there any way around this, possibly using third party tools?

  Read the article

• subdomain on another ip address

  - by pixeline

  hello, my main domain (domain.com) sits on a server with ip address 1. I need to have a subdomain (forum.domain.com) point to a server with ip address 2. Both servers are hosted at iWeb, so i have a cPanel interface to manage them, but i can't find the right way to do that. I tried a .htaccess redirection, which works, but the visible address in the browser changes too. Any help on how to do that would be appreciated. Thank you

  Read the article

• Using an SSD with no AHCI [ICH7 base] - Windows 7 hangs frequently

  - by h4xnoodle

  I have a Shuttle Intel G31 + ICH7 (base -- not M/R etc) system. I just bought an OCZ Vertex 3 120gb [VTX3-25SAT3-120G] which includes the Sandforce 2218 firmware. The ICH7 does not support AHCI. I understand that this can be a problem. What I don't understand, is if it's necessary to have the proper performance of this drive. I know that without AHCI I may get a limited read/write speed -- this is fine. What my concern is, is the constant freezing/hangs I'm getting with Windows 7 on any disk activity. The 'Highest Active Time' flip-flops from 0 to 100% every minute or so regardless of large or small files. EDIT: The threads/processes with the highest response time is the kernel. I've been reading about other people with Shuttle SG31G2s, and they seem to be using SSDs no problem. Is this the controller's fault? The fact that I do not have AHCI enabled? It makes sense to me that if this SSD requires AHCI features that it would cause Windows to hang, but I would like to fully determine my situation before returning things/reformatting. To initially have my drive recognise the SSD at all, I had to change the BIOS option to Force Gen II instead of Auto for the SATA controller. I then installed Windows with no problem. There were no errors in the event log related to disk usage, but watching the perfmon I could see the highest active time and the processes (usually pagefile.sys being written to, or chrome/firefox caching) which was correlated to the hanging. So now what I need answered is: should I be returning this SSD and getting one with a different controller, or returning the SSD all-together as it will never work out and I will continue to get these hangs. Posts I've read: Windows 7 New SSD SATA AHCI? -- suggests to use AHCI http://forums.anandtech.com/showthread.php?t=2189868 -- Sandforce issues Windows 7 freezes with SSD -- and attached posts Why does my Windows 7 PC / SSD drive keep freezing? -- this is not the controller I have, but still a related issue. Windows 7 hangs after longer inactivity of user -- also tried messing with power settings with no luck. It was already set to 'Never' for turning off HDDs.

  Read the article

• Converting to Base 10

  - by incrediman

  Hi, Let's say I have a string or array which represents a number in base N, N1, where N is a power of 2. Assume the number being represented is larger than the system can handle as an actual number (an int or a double etc). How can I convert that to a decimal string? I'm open to a solution for any base N which satisfies the above criteria (binary, hex, ...).

  Read the article

• ipv6 port 445 does not accept the request from a global type address

  - by blacktea

  I want to scan the port 445 in windows server 2003, but my scanner only have one type ipv6 address which is global not link-local. When I do this,I find that I can't find port 445 open. But I use the command "netstat -an" to assure the port 445 is listening. Finally I find this confusing phenomenon: 1.when I set a link-local ddress in my scanner, then it will work in scanning port 445. 2.when I only set a global address in my scanner, it doed not work. This means if a host with a link-local address use socket to send a syn packet to the port 445 in server 2003, it will receive a ack packet. But if with a global address it will receive a rst packet. Thus, I can't scan the port 445 in server 2003 with a global address. I need to know why? Can anybody help? And I use the netsh-firewall to check the exception and netsh-interface-ipv6 to turn off the firewall on the specific interface. Still can't establish the connection with port 445, do you have any ideal about this ?

  Read the article

• Assign fixed IP address via DHCP by DNS lookup

  - by Janoszen

  Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

  Read the article

• Is it possible to rent an IP address to mask the server real IP address?

  - by net-girl

  A customer would like to lease an IP address and point it to a dedicated web server with the intention of "masking" the server's IP address so it would be difficult to tell where the site is hosted. I found a company that leases IP addresses here: http://www.webhostingtalk.com/showthread.php?t=1191688 Is this even possible? Can they rent an IP address from a 3rd party in order to hide the server's IP address? Update: My client will be hosting a government leaks site and is trying to become Raid-Proof similar to what the pirate bay did: http://torrentfreak.com/pirate-bay-moves-to-the-cloud-becomes-raid-proof-121017/ Only that I'm worried about using a reverse proxy because of the latency it could cause having the app servers hosted in one data center and the load balancer/reverse proxy in other and also having to pay twice for bandwidth.

  Read the article

• network endpoint accessible via hostname only, not address?

  - by Dustin Getz

  someone told me that this piece of network hardware (NAS) has a security setting such that it can only be accessed by hostname, not by IP address. I don't understand, as I thought DNS resolved the hostname to an address on the connecting client's side, then at protocol level always used the raw address, so how can this 'security' measure be possible?

  Read the article

• Tool to Convert table base design to table less design

  - by brz dot net

  What is the best optimized way to convert table base design to table less design? the layout should be cross browser compatible and SEO Friendly. Is there any tool/editor which converts existing table base design to table less design? Is there any option in dreamweaver to convert the design in tableless?

  Read the article

• Public/Private IP address

  - by crn

  We have several websites (with several public IP addresses) running on a web server. In IIS, the IP address are internal IP addresses (192.168.xxx.xxx). How do I figure out which public IP address matches which internal IP address? My goal is to change some public IP addresses. The particular web server is running IIS 6 on a Windows 2003 Server. Thanks, in advance, for your help!

  Read the article

• CentOS 6 - Make system aware of custom lib paths and missing base links

  - by Mike Purcell

  I am trying to compile libmemcached (1.0.7) on CentOS6, and keep getting the following warning: ... checking for event.h... no configure: WARNING: Unable to find libevent ... I manually compiled libevent (2.0.19) and built it using the following configure line: OPTIONS="--prefix=/usr/local/_custom/app/libevent" Everything compiled and installed fine, but I couldn't figure out how to make the system aware that the lib files are in the custom /usr/local/_custom/app/libevent/libdir. I stumbled upon an article and read that I can make the system aware of custom lib paths by adding a custom file to /etc/ld.so.conf.d/ directory: # /etc/ld.so.conf.d/customApp.conf /usr/local/_custom/app/libevent/lib Then I issued the ldconfig command and was able to confirm that libevent was included by issuing this command: ldconfig -p | ack -i libevent Seeing that libevent was now included in the ldconfig output, I figured I would be able to compile libmemcached and satisfy the aforementioned warning. Unfortunately it did not. So I took another look at the ldconfig output and noticed this: libevent_pthreads-2.0.so.5 (libc6,x86-64) => /usr/local/_custom/app/libevent/lib/libevent_pthreads-2.0.so.5 libevent_openssl-2.0.so.5 (libc6,x86-64) => /usr/local/_custom/app/libevent/lib/libevent_openssl-2.0.so.5 libevent_extra-2.0.so.5 (libc6,x86-64) => /usr/local/_custom/app/libevent/lib/libevent_extra-2.0.so.5 libevent_core-2.0.so.5 (libc6,x86-64) => /usr/local/_custom/app/libevent/lib/libevent_core-2.0.so.5 libevent-2.0.so.5 (libc6,x86-64) => /usr/local/_custom/app/libevent/lib/libevent-2.0.so.5 There are no references to the base links, for example, I would expect to see links to these (ls -la /usr/local/_custom/app/libevent/lib): libevent.so -> libevent-2.0.so.5.1.7 libevent_openssl.so -> libevent_openssl-2.0.so.5.1.7 libevent_core.so -> libevent_core-2.0.so.5.1.7 So either I am doing something wrong, or the system still does not know where to look to find libevent.so. -- Update #1 -- I wasn't able to get libmemcached to compile without the warning notice, even after trying to compile using the following configure command: ./configure --prefix=/usr/local/_custom/app/libmemcached CFLAGS="-I/usr/local/_custom/app/libevent/include" LDFLAGS="-L/usr/local/_custom/app/libevent/lib" I thought for sure this would work because I am directly passing the include and lib directories to the configure command. But it did not.

  Read the article

• Distinguish the between intranet and official IP addresses

  - by Saravanan A

  How can I find out whether a given IP address is an official internet address or an internal intranet IP address?

  Read the article

• Setting up a static IP address (public) in Ubuntu

  - by ycseattle

  I have a business class internet connection and need to setup a static ip address for a machine. I did a search online and only find how to setup static local ip addresses (like 192.168..). I tried the same technique, and only setup the ip address and netmask, but after restart networking the computer could not connect to the outside world. This is what I did: 1) edit /etc/network/interfaces iface eth0 inet static address 173.10.xxx.xx netmask 255.255.255.252 2) edit /etc/resolv.conf search wp.comcast.net nameserver xx.xx.xx.xxx nameserver xx.xx.xx.xxx 3) restart network sudo /etc/init.d/networking restart Now the last step didn't report error, ifconfig shows the ip address was set, but this server cannot connect to outside world, ping google.com and reports "unknown host google.com". Any ideas?

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >