Search Results

Search found 14821 results on 593 pages for 'device driver'.

Page 28/593 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Autodetect/mount SDCards and run script for them on Linux

  - by Brendan

  Hey Everyone, I'm currently running SME Server, and need to have a script run upon the attachment of SD Cards to my server. The script itself works fine (it copies the contents of the cards), but the automounting and execution of the script is where I'm having issues. The I have a USB hub consisting of 10 USB ports; that shows up as: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 (The hub is the TERMINUS TECHNOLOGY INC entries) As I cannot plug SD Cards directly into the server; I use a USB to SD card attachement (10 of them) plugged into the hub to read the cards. Upon pluggig the 10 attachments (without cards) into the hub; lsusb yields the following: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 073: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 072: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 071: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 070: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 069: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 068: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 067: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 066: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 065: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 064: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 As you can see, the readers are the "Gensys Logic, Inc" entries. Plugging in an SD card to a reader doesn't affect lsusb (it reads exactly as above), however my system recognises the cards fine; as indicated by dmesg: Attached scsi generic sg11 at scsi54, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 73 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 If I manually mount sdd1 (mount /dev/sdd1 /somedirectory/) this works fine. What I'm really after is a solution that automounts each of the cards as they are inputted into the reader; and executes a script for them (this will involve copying their contents to another directory). My problem is that I don't know how to do this; I don't think udev will work as the USB devices don't change; if I could somehow get udev working with /dev/disk/by-path/ however I think this is doable (it seems to keep constant entries). ls /dev/disk returns: pci-0000:00:1d.7-usb-0:4.1.1.1:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0 pci-0000:0b:01.0-scsi-0:0:1:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0-part2 From above, we can see I have only one card plugged into the reader (pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1). Going mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 Works and places the card under /media/usbdisk/, however: mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 slot1/ doesn't work, and returns "mount: can't get address for /dev/disk/by-path/pci-0000" Any ideas and solutions would be great, I've seen the knowledge of a lot of the guys on here before so I'm hopeful someone can help me out. Thanks

  Read the article

• Wireless driver - how to load manufacturer's STA file (Ralink 3290)

  - by Matt

  Caution: I'm a newb. Hardware: Giada i35G, cedar trail atom with nvidia gf119, railtek ethernet and Ralink 3290 for wireless. Already accomplished: Installed Ubuntu 12.10, loaded GPU drivers and redirected sound out through GPU card to HDMI. Ethernet works like a charm. Issue: Can't get my wireless up and running. There seems to be no package to which I can simply run a sudo get-aspt install ... I found the corresponding Linux driver from the manufacturer's site, but I have not managed to find out what to with the file. Here's the manufacturers site: http://www.ralinktech.com/en/04_support/support.php?sn=501 I get a file with the following name: \2012_0508_RT3290_Linux_STA_v2.6.0.0.bz2 I hope somebody might be able to tell me what to do next. Thanks for reading and apologies for potentially asking a trivial question. Best regards, Matt

  Read the article

• How to set wifi driver settings to prefer 5 GHz channel above 2.4 GHz

  - by Wouter

  Currently I'm in a new building of my university. In this building my wifi often breaks down and then restores connection again. This is really irritating since it happens a lot. Now as a coincidence there were some tech guys running around here and where asking everyone if the wifi was doing fine. I told them that my wifi tears down all the time and then reconnects. They figured out that my wifi is switching all the time between the 2.4 GHz channel and 5 GHz channel. They asked me if I could acces the driver settings of my wireless card. Unfortunately I don't know how to do this is in either Linux or Windows. And unfortunately again they only knew the windows solution xD. So I hope somebody can tell me how I tell my wifi that it should stay on the 5 GHz network and not disconnect and switch to the 2.4 GHz channel?

  Read the article

• Ralink RT3060 Driver not working

  - by Hoerlle

  I am new to linux. I was using fedora and now switching to Ubuntu for a try. On Fedora my wireless network card was working OK from the OS install (I didnt had to do anything for it to work) On Ubuntu, with the lspci -v command, I get: Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R Subsystem: Ralink corp. RT3060 Wireless 802.11n 1T/1R Flags: bus master, slow devsel, latency 64, IRQ 20 Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2800pci Kernel modules: rt2800pci But I am not able to find any wireless network. What to do now? Thanks

  Read the article

• Bluetooth driver not working in ubuntu 12.04 hp pavillion dv6 6155tx

  - by Arin Chakraborty

  In my Hp Pavillion dv6 6155-tx everything is working just fine except for the Bluetooth. I have pretty much tried every bluetooth software out there but none seems to work. It seems that the driver is not installed or something like that. When i search for new devices it just dont find any device and the vice versa. Please kindly help me ! I am frustrated for more than 4 months now searching for some answers. The output of rfkill list :- 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Wireless device not working...supposed problem with b43 driver

  - by Francesco

  I just installed Xubuntu 11.10 onto an old Acer Aspire 3003wlmi. The wireless card is not working. I did all the passages illustrated in the troubleshooting guide but I came up with nothing. It says that driver is b43, but when I booted from the installation cd I noted down some messages saying "Error - b43/ucode " and "Error b43/phy_...something". I had Ubuntu 10.10 installed before and I remember I had similar problems but I don't remember how to solve it. If you please can help me. thanks a lot. Francesco

  Read the article

• Wireless not working, no driver showing in the Additional Drivers window

  - by edit lopez

  I am a new user of Ubuntu. I have a Asus Q501L laptop that came preinstalled with Windows 8, but I wanted to move from Windows and try something new, so I just decided to install Ubuntu without thinking to much about it. The problem I have is that I can't install the additional drivers. When I go to to Additional Drivers nothing appears, it just says: no proprietary drivers are in use and in small letters continues: a proprietary driver has private code that Ubuntu developers can't review and improve. security and others updates are dependent on drivers vendor.. I can't even use the wireless connection. I really don't know what to do. I tried to download the drivers from Asus, but when I tried to install them it said: an error occurred while loading the archive. Also I don't know the model of the PC wireless card. If there is something I can do to find out that please tell me. Thanks!

  Read the article

• ATI Proprietary Driver Over/Underscan setting ignored after reboot

  - by Lassi

  I installed the proprietary driver (fglrx-updates) on Ubuntu 12.10 64-bit for my graphics card (ATI Radeon HD 7570). I am using two displays, one connected with DVI, one with HDMI. I set the desktop to be expanded to both screens and disabled the under scan for the HDMI screen, which is always for some reason enabled on HDMI screens. Now the issue. Everything was fine until I restarted my computer. After reboot, the screen connected with HDMI cable had the black borders again, meaning that the under scan is again enabled. I checked the ATI CCC, and under scan was disabled. However, moving the slider to enable under scan and then back to zero fixed the issue -- temporarily. The same issue is repeated every time I restart my computer. The settings remains the same, but the computer seems to ignore it. Any ideas how I could solve the issue?

  Read the article

• Broadcom STA driver doesn't work well with BCM4313

  - by Oli

  Following on from my other question about our new Samsung Q330, I've noticed that the wireless is incredibly flakey. It can connect but after a little use, especially if it does a lot of downloading at once (read: install something from the Software Centre), the connection stops working. Network Manager still see the connection, there's just no network throughput. I've simple tests like pinging other local network hosts and they just fail. The Samsung Q330 has a Broadcom BCM4313 wifi card (it's proper ID: 14e4:4727) and it's running on the Broadcom STA drivers that Jockey suggests (it didn't work at all without this). I did try installing b43-fwcutter but this just didn't do anything. I was expecting a configuration screen to come up (to select a firmware) but it never did. This page suggests the newer brcm80211 driver might be able to help, but I don't know how to install that. If you think this is the right route, please let me know how one goes about installing it.

  Read the article

• Problem with graphic Ubuntu 12.04 (not sure if it's because of the graphic driver)

  - by Duy Nguyen

  Ubuntu 12.04 was functioning properly . Then after an update, some graphic elements stop working properly. I could not launch programs that has 3D elements. Work space switcher's window displays 2D window instead of a 3D like usual. In Details menu, the Graphic row is blank. I am using Intel GMA 4500MHD graphic card. I am guessing that the driver is not properly installed? Anyone has the same issue? Please help!

  Read the article

• Proprietary Driver missing after Kernel upgrade

  - by Chris

  I recently upgraded my kernel to the Linux 3.4 kernel. Upon doing so, I found that it zapped my proprietary driver for my graphics card. As an alternative, I had saved Catalyst 12.8, but now it will not open through Software Center. I tried several other terminal methods, but it seems that many of these postings are bunk. They only work until you're almost done and then you get errors. I just need a little help from somebody who has been there, as I am new to Ubuntu. I'm kind of afraid to reboot because this is my 3rd full load of Ubuntu. Any ideas?

  Read the article

• No Wireless In Ubuntu 13.10 (maybe Need Wireless Driver) [duplicate]

  - by viktorhubinette

  This question already has an answer here: No Wireless In Ubuntu 13.10 2 answers hi after updating to ubuntu 13.10 i cant see the wireless networks on the network meny so what should i do ? tell me some commands you need to see to solve the problem. Thanks (i maybe need a wireless driver becouse i installed one when i haved 12.04 becouse i could not connect to wireless before too) i cant connect to wireless that my problem so what do i need to do to get this wireless working again? some outputs lsmod | grep rt1 nothing sudo modprobe rt18192cu FATAL: Module rt18192cu not found. iwconfig eth0 no wireless extensions. lo no wireless extensions. sudo iwlist wlan0 scan wlan0 Interface doesn't support scanning. rfkill list all nothing

  Read the article

• wireless driver error after install

  - by James

  after following this command to update wifi drivers:1- Boot into Ubuntu 2- Open a terminal by pressing Ctrl+Alt+T 3- Type in the following (verbatim!) sudo apt-get update && sudo apt-get upgrade press Enter, the command will prompt for your password (the one you use to login into Ubuntu), type it and press Enter. Wait for it to finish updating your system. Now type: sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer Wait for the command to finish installing the driver, when done restart your computer. i get a message after the first command when installing has done saying not enough space so it aborts! what do i do to fix this

  Read the article

• Xen 4.1 + NVidia driver = Unity has no window decorations

  - by Shade

  I am running Ubuntu 11.10 with Unity. I installed XEN and booted its kernel. The machine booted normally. However, when I started Unity (3D), there were no window decorations. I tried Unity 2D and the window decorations are present there. I then decided to remove the driver (installed through Additional Drivers) and install it manually like this: IGNORE_XEN_PRESENCE=y CC="gcc -DNV_VMAP_4_PRESENT -DNV_SIGNAL_STRUCT_RLIM" ./NVIDIA* ...but the window decorations were still missing in Unity 3D. The window decorations are there when I boot the regular Ubuntu kernel (without XEN support). What could be the problem and how to fix it?

  Read the article

• Compiz does not work with proprietary nvidia driver

  - by brandizzi

  I have a ThinkPad T420 with an NVidia Quadro video card. It crashes constantly when I close this lid (if you are curious..) and I suspect on a problem with nouveau drivers, so I installed the proprietary NVidia drivers. Howeer, when I install and use this driver, Compiz does not work. If I start a session with uses Compiz, no window manager/decorator is presented. I just can get Metacity working. Does anyone has any idea about what may be causing this problem?

  Read the article

• Nvidia Driver versions?

  - by Patrick Krenz

  I've looked all over and can't find any reason as to why or how Nvidia names their drivers. for example they have a 330.xxx/340.xxx series that are current but also a 300.xxx and i've found that they aren't always release in order by number. Here's an example on there site with version and release date 331.38 - January 13 334.16 - Feb 7 331.49 - Feb 18 I'm really confused about what driver to actually go with, a few different series versions seem to work adequately and I just want to have an understanding of it and what the best option to work from would be. I really appreciate any information

  Read the article

• Ubuntu Server Installer does not detect usb device

  - by Peter

  For some time now I am struggling with the 12.04 Ubuntu Server installer. I am trying to execute a clean, CD based install with the mentioned version onto an SD card. For the sake of the simplicity I have taken out the HDD. However, I had to recognise that the "disk detection" phase simply can not find the SDCARD. It says "No disk drive was detected. If you know the name of the driver needed by your disk drive, you can select from the list." What is really strange that I have tried the older Ubuntu Server installer (11.04) and this is simply recognising the sdcard... Does anyone have any idea? Many thanks, Peter

  Read the article

• Beginner help with compiling a driver into the kernel so my ethernet works

  - by MattC

  I have a Acer Aspire Revo nettop and it seems like it's a common error that Ubuntu doesn't have a driver for the ethernet. Someone recommend following the steps on this page. http://manpages.ubuntu.com/manpages/jaunty/man4/nfe.4freebsd.html The only problem is that I have no clue what to do really. I'm almost like an absolute beginner with linux and was hoping to play with it by doing some apache+php+mysql stuff, however I cannot at the moment. Where is the kernel configuration file? and where is the loader.conf file?

  Read the article

• HW resources for the device driver [closed]

  - by VladimirLenin

  Need to provide memory and IRQ resources to the Linux kernel in order to bring up the CAN controller. Have no idea how to get them. Below is the structure I need to fill in. This structure I have taken for example, this is for the Run-Time Clock, but I need for CAN controller. Both are on the same board, and there are constants for RT Clock (and all other devices), but not for my CAN chip. When looking at the subject chip driver's code (sp_probe() function), I see it needs the same type resources. struct resource tegra_rtc_resources[] = { [0] = { .start = ???, .end = ???, .flags = IORESOURCE_MEM, }, [1] = { .start = ???, .end = ???, .flags = IORESOURCE_IRQ, }, };

  Read the article

• "input not supported" at login screen after ati driver is installed

  - by squalo78

  I'm running ubuntu 11.10 and I installed the Ati driver from the oficial page. When i reboot, the grub and the splash screen are working (at lower resolution) but instead of the login screen, it shows "input not supported" message. If I use "Ctrl+Alt+ keypad +" I can see my login screen at 640x480 resolution and login. I don't know how to make login screen displays 1440x900@60, that is the resolution set on my session. I'm running Ubuntu 11.10 with ati hd4200 video card, a monitor acer aL1916w that supports the resolution 1440x900.

  Read the article

• Unwittingly activate wrong wireless driver and now cannot activate the correct one

  - by Sumeth Chaochuti

  I just installed Kubuntu 10.10 on my MacBook 3,1 and found no wireless connection. Using KPackageKit I activated Broadcom b43 because it had already been selected for me. When I subsequently tried to activate Broadcom STA, however, I was returned with an error. After reading Jockey log I removed the wrong driver and reinstalled all drivers so that I can activate the correct one. It hasn't work even though KPackageKit now shows that I have installed: bcmwl-kernel-source bcmwl-modaliases broadcom-sta-common broadcom-sta-source According to the log it appears as if there are conflicts but I don't know how to rectify it. I'm completely new to the platform, just started using Kubuntu 2 days ago. I'll appreciate any advice anyone can give. Thanks.

  Read the article

• How to install Radeon X600 driver

  - by mmrs151

  I am completely new to Ubuntu and now running into so many problems regarding my display. I will be so grateful to the community to help me out and keep me loving Ubuntu. When I run lspci | grep VGA I get the following output 01:00.0 VGA compatible controller: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] I am not sure if it means the driver is installed. Now the problem is I can not change the resolution like I can do in windows. I wanted to use dual monitor but it can not detect dual monitor. The monitor option in the preference shows 'Unknown' I tried to use a VGA switch for my ps3 and computer, but the computer is stuck with 1024x768 resolution. I have been trying for last three days, couldn't figure out anything. Now asking for you wisdom to get my display work. Regards, MMRAHMAN

  Read the article

• screen driver problem

  - by exilada

  I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

  Read the article

• alx driver not working properly

  - by user292768

  My alx driver seems to be working fine for everything except apt-get. I can navigate to web pages, the ping command works just fine, but whenever I try to do apt-get update or apt-get install it hangs on trying to connect to whatever archive it's trying to pull info from. There's no error message, nothing to imply that it can't connect, it just hangs there and does nothing at all. I've tried re installing alx, upgrading/downgrading my linux kernel, downloading source and building alx from scratch, etc etc but nothing works. Does anybody else have this problem/know how to fix it?

  Read the article

• What driver for nVIDIA GeForce MX440?

  - by ubufan

  I have recently installed (clean install) Ubuntu 12.10 on a desktop PC with nVIDIA GeForce MX440 (AGP 8x) and I have problems with Unity. Although I can see the desktop, however i can't see unity bar and icons. So, I decided to install lubuntu-desktop to see the performance. And yes! I choose lubuntu-desktop from Log On screen and the performance is definetely much better and has nothing to do with the aforementioned on unity. The system has native drivers from the Ubuntu installation. I didn't touch anything in xorg configuration. I also remember that I have managed to have the best performance with this graphic card on my previous Ubuntu 9.10 system, by editing some values in /etc/X11/xorg.conf file. But I can't remember that options, because I formatted the / partition! My question is: Which is the most suitable driver for this card, in order to load the unity feature and have better performance on it?

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >