Search Results

Search found 2372 results on 95 pages for 'flashing the bios'.

Page 28/95 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Freezing with black screen after booting OS with AMD Catalyst driver

    - by Oleg
    I have ATI Mobility Radeon HD 5470 on my HP laptop. A few weeks ago I was confused with a weird trouble in proprietary drivers for my graphics card. When I start X server (or just boot Windows) system sometimes totally hangs up with black screen. The most annoying thing is that issue appearing is absolutely random (2 success, 3 fails, 1 success, 7 fails, etc.). It appears both on Linux (Arch, Debian 7) and Windows XP. I've tried reinstalling OS, drivers, etc. I've also tried updating BIOS. Then boot was successful for the next few times and issue appeared again (probably it was just a coincidence, because another BIOS updates gave no results). I really don't know what to do. Any ideas?

    Read the article

  • Mac Air Bootcamp Windows 7 Installation and USB3 Hurdles

    - by Casey
    I am trying to load windows 7 on a new Mac Air(OS X 10.9 Mavericks) using Boot camp, a downloaded windows 7 iso file, and USB3 flash drive. No obvious issues with stepping through the initial phases of boot camp and disc partition, but when the system reboots to load windows setup/install from the USB3 flash, it stalls after a few screens and gives a "missing cd/dvd drive" error. I have read similar posts regarding this fail that imply there is possibly a windows 7 compatibility concern with USB3, and that if a USB2 port is available....or if you can change your BIOS to make your USB3 look like USB2...then you can get around this error. Unfortunately I only have USB3 ports on this system, and it appears accessing the PC equivalent "BIOS" on the new Macs is very difficult....and if you screw it up you can ruin the system. Does anyone have any suggestions? I should also mention that there is NOT a CD/DVD drive on the Mac Air....and I can't migrate to Windows8 (for various reasons). Any help is much appreciated!!

    Read the article

  • Windows 7 installation asks for DVD drivers

    - by koen
    I have installed Windows XP on my machine (Company CQ5020NL). Before I was able to do that, I set the SATA controller to IDE in the bios. Now I want to install Windows 7 upgrade. The DVD boots into the installation setup, but when I click "Install now" and am asked to load "A required CD/DVD drive device". When I click "Browse" I can browse the installation dvd and the drive I want to install to. I have tried all the SATA options in the bios already. I have no idea what to do... can anybody help me out?

    Read the article

  • PERC 5/i Enable alarm on disks failures

    - by Andy M
    I'm trying to enable one the alarm of my server's raid controller PERC 5/i. Using this documentation, under the chapter Audible Alarm Warnings, it's explained that enabling an audible alarm is allowed in order to quickly spot failures on my hard disks. My trouble is that when entering the disk controller configuration (Ctrl+R at boot time), I'm able to set up lot of things but I cannot navigate to Enable Audible Alarm. I have : Enable Controller BIOS Enable Alarm Enable BIOS stop on Error I can navigate with my arrow keys to both the first and third items, but I cannot navigate to or select the second! It's not greyed out, and seems like I should be able to select go on this entry, but my cursor keep skipping it. Any ideas about what I'm missing here?

    Read the article

  • "Error loading operating system": Win7/Vista

    - by LookitsPuck
    Hey fellas, Have this computer for about 2 years now. Originally had Vista installed, now have Windows 7 installed. Both on separate hard drives. Also have another drive used strictly for media. About a week ago, the Vista hard drive started going on its way out. Was getting problems on startup. After a few BIOS settings, I was able to get into Windows 7 and everything was fine. However, I started remembering the startup issues, so I deleted the bootup for Vista under msconfig. Didn't restart the computer at that time, though. For a few days, everything was ok. Last night I play a little poker, then hit the hay. I wake up to a good ole "Error loading operating system" on the screen. Just wonderful. Looks like the computer restarted overnight (auto updates, anyone?). So, after a big of finagling and half hearted tries, I can't get past the "Error loading operating system" screen. FWIW, in the BIOS it can see my hard drives fine. So I move on. I get my Windows 7 installation disk to try and do a repair. Go in the BIOS, change boot priority to DVD drive, and we're on our merry way. After loading from the disc, I first try jumping into the "Repair your computer" section. That opens up the System Recovery Options. However, this is where the problem comes into play. I don't see any operating systems here. Nada. What's odd though is if I click on the Load Drivers button, I can see my Windows 7 partition (C:), and can go through the files and folders without issue. What do I do at this point? I can't repair it. It seems like I can traverse the hard drive without issue when in an open dialog in the System Recovery Options, but I'm getting the good ole "Error loading computer" on bootup. Suggestions? Thanks all!!

    Read the article

  • Ubuntu 9.10 is not starting on netbook

    - by anonymous
    I installed Ubuntu 9.10 onto my external hard drive cause it's cool to be able to borrow a friend's laptop and be able to have my entire system. It works on the 2 systems i tested it on: my desktop and my mom's laptop. I had to work on something earlier so i borrowed my friend's netbook. I started it up, chose Ubuntu 9.10.20 and it got to the Ubuntu loading screen with the 3 people holding hands right before user selection then it suddenly went black. Naturally, i freaked out because it wasn't my laptop. I held the power button down and reset the netbook but the screen was still black, it didn't even show the BIOS. I repeated the process without my hard drive, and it was still black without the BIOS showing up. I had to remove the battery, plug it to a power source, and power up to start the netbook up again. Can anyone tell me what happened?

    Read the article

  • Notebook fan spinning at max after trying Linux

    - by Igor Kulman
    I have a Thinkpad T420 (4178-BSG) I use with Windows. The fan (cpu) was always very quiet and I was completely satisfied with it. A few days ago I booted Backtrack Linux from a flashdrive and the fan started to spin at maximum and was very loud. The problem is that this state persists. When I start the Thinkpad and boot Windows as usual the fan start spining at max and never stops. It drives me mad. It looks like somehow the Linux change some settings and I have to suffer. I tried reseting BIOS, updating BIOS, nothing helpes. I even removed the keyboard, looked at the fan but there is no dust.

    Read the article

  • Grub loading. The symbol ' ' not found. Aborted. Press any key...

    - by John
    Hi there, I have a dual boot system on dell xps 9000 with windows 7 and ubuntu. But after I performed system backup on it as requested by windows 7 I am no longer able to boot into the computer, instead at the beginning after bios I get the following message: Grub loading. The symbol ' ' not found. Aborted. Press any key... I tried to change bios booting config to starting with harddrive and it still returned the same message. Using windows boot disk only asks me to do another system backup or threatens to delete my harddrive completely. The only solution I have so far is to reinstall ubuntu, but that leaves 2 additional copies of ubuntu on my computer. Is there a simpler way to fix the situation so I can actually boot into windows? Thanks so much.

    Read the article

  • Wrong Sound Blaster's PCI ID within Windows

    - by pavian
    I own Sound Blaster X-Fi Titanium, it was working with no problems under Linux or Windows 7. It's original PCI ID is 1102:000b but now I see different within MS Windows. BIOS setup: 1102:000b GNU/Linux: 1102:000b Windows 7: 1102:000d Windows 8: 1102:000d In last days I'm experimenting with IOMMU PCI passthrough in Xen and I tried to pass this device to virtual Windows 7 and 8. Here I found this problem. I don't know if this is just coincidence or reason of my problem but it's wrong even in physical system. Windows detects 1102:000d as a High Definition Audio sound device (I guess this name, I have localized Windows, but this is general name, the same was with Realtek HDA before drivers), it's playing but it's unstable (Windows speaker testing can crash that application) and I can't install Creative software. Used driver is hdaudio.sys. Booting in BIOS or UEFI mode doesn't change anything. Nor CMOS clean. Someone met the same problem.

    Read the article

  • Computer cannot detect hard disk

    - by Nrew
    Details: BIOS: AMI Bios, set primary master to Auto OS: Windows XP Sp2 Memory: 384 Mb Processor: Pentium 3 yeah this one is really very old. And some of the capacitors in the motherboard are already bulging. It detected the hdd yesterday when were trying to fix it and install xp. But today it cannot boot and said: Boot failure. What can you suggest that I would do to revive this old machine. What would be the problem, is it the hdd, the ide cable or the motherboard.

    Read the article

  • Change Linux Console's Default Monitor

    - by Tim M
    Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

    Read the article

  • Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

    - by Pro Backup
    In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

    Read the article

  • Problem setting up DL360G5 with scsi RAID

    - by ernelli
    I have a problem with reinstalling OS on a DL360G5. The BIOS [F9] do not detect any disc controllers and the HP SmartSetup did not find any compatible controllers. Inside the server, the two SCSI disks are conncted to a RAID controller using BCM8603 chipset. How is disc contoller supposed to be setup? I have tried to do a full BIOS reset. EDIT At the moment we suspect that the Smart Array controller E200i/412205-001 is broken. Are there any status LED's that indicate failure or success during start up? At the moment all LED's are off.

    Read the article

  • Thinkpad Bluetooth turns itself on upon restart/hibernate

    - by Traveling Tech Guy
    I have a T400 with Windows 7 64bit. About 3 weeks ago, the Lenovo update pushed a Bluetooth update that added a 2.1 driver and device experience. Since then, my bluetooth turns itself on whenever the OS comes up (full restarts as well as waking from hibernation). I can turn it of using the <Fn>+<F5> Radio menu, but it just turns itself on again the next time. If I forget to turn it off, it just eats my battery that much faster.I've been scouring the web and couldn't find similar occurrences. Is this a hardware issue, a BIOS issue (although no reference to BT in any of the BIOS menus), a driver issue or (shudder) a user issue? Thanks for your help.

    Read the article

  • How to control fan speed on Compaq Presario under Ubuntu?

    - by Josh
    I have a Compaq Presario R4000 running Ubuntu Linux 9.10 karmic. The system runs very hot and one of the fans is wither never running or always running at the slowest speed. For a while I thought the fan was dead but I just updated the BIOS (Phoenix BIOS) and during the update, that fan suddenly kicked in at full speed! How can I get that fan to spin up during normal usage? I have tried sensores-detect but all it found was k8temp, no fans... (SpeedFan under windows found no fans either)

    Read the article

  • Does dual-channel work only with an even number of RAM sticks?

    - by iconiK
    I have noticed that on the ASUS P5QL Pro motherboard the BIOS says "Dual Channel Asymmetric Mode" during POST. The motherboard has three 2GB Kingston ValueRAM 800 MHz DIMMs populated in the first 3 slots from the CPU socket. I have not run any benchmarks to verify that dual-channel is somehow being used, but I believed that dual-channel has to have an even number of sticks (and for triple channel, a multiple of 3). Another example is the Intel DX58SO motherboard; it has four DIMM slots, yet it's an LGA 1366 motherboard which does triple-channel. Apparently triple-channel still works with four DIMMs, instead of falling back to dual-channel. What does the BIOS' POST message mean in those case? Is dual-channel really used for the first two DIMMs, with the other one being an odd one in single-channel mode?

    Read the article

  • How do I overclock a dual core processor?

    - by Pankaj Bhardwaj
    This is a serious problem. I want to speed up my compilation process. I have never been especially fond of overclocking, however my current compilation time for my project makes my crazy! I found information about which parameters I should change to overclock and which values are safe. However, I have one basic problem. I don't have the ability to change this option in my BIOS. It is possible that these options have been blocked by the system administrators? Getting a faster processor is not an option. How do I edit the proper values to overclock my CPU. Do I need to flash my bios to another version? My specs: Entium Dual-Core Cpu E5400 @2.7GHz Asrock motherboard 4GB RAM Windows 7 Ultimate 32-bit

    Read the article

  • Is there a point to using theft tracking software like Prey on my laptop, if you have login security?

    - by Reckage
    Hey, so I have a Thinkpad that I use in a variety of places (coffee shops, work, etc.). I don't generally abandon it, but I figure there's a chance I might get careless and it gets stolen at some point. I was thinking of installing something like Prey (http://preyproject.com/), but my OS installs are password secured, and on top of that, I have a fingerprint reader that you need just to get through the BIOS. So: is there actually any benefit to setting up software that tracks the laptop's whereabouts? I imagine that either: The laptop won't boot or login, if the thief doesn't get past the security. If the thief goes around said security somehow, presumably they've split the laptop for parts or bypassed BIOS security, gotten stuck on Windows security and formatted it. Given that it's highly unlikely that the thief would go to the trouble, what's the utility in installing laptop tracking software like Prey?

    Read the article

  • Sony VGN-NR260E "External Device Boot"

    - by user72158
    [A LITTLE BACKGROUND] On all modern Dell computers pushing the F12 on bios boot will allow for a screen that lets you choose what boot option you need. For example if I want to boot off of a USB flash drive to boot into a live Linux distribution in order to clean virus's on netbooks that do not have CD drives to boot from I would push F12 and choose USB device from the list of options. If this does not show up then I can always go to the F2 bios setup and choose flash drive to be the first option. When I restart the computer it will boot into the flash device. I understand that I can purchase an external USB CD drive and then boot from that. I do not want to use that option. The reason for using a flash device instead of a CD is: A: This USB flash device has several different boot OS's on it that are used. B: The antivirus disks are updated often and burning cd's and throwing away others is wasteful compared to simply updating a flash drive. There is nothing wrong with the flash drive. It works perfect on many other PC's. [PROBLEM] Booting this flashdrive has been working for years on hundreds of computers... I just have this ONE computer that I cannot figure out how to get it to boot on... I have a Sony Vaio that will not boot to this device. I've tried pushing every key combo I can think of (F12, Esc, Del, F10...) and none of these key combinations will bring up the boot menu. I chose F2 and went into the bios and changed the first boot device to USB flash device. This did not work either. There is an astrix next to the device and the note states: "This Drive is available when External Device Boot is Enable." [WHAT I NEED] I need to know How to enable External Device Boot on the Sony Vaio VGN-NR260E laptop. OR How to bring up the Boot Menu to allow me to boot off a flash device. Thanks for anyone that can help!

    Read the article

  • Ubuntu 9.10 LiveCD stalls after "Install Ubuntu" selected from boot menu on eMachines

    - by nicorellius
    I am trying to install Ubuntu 9.10 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the boot menu: Try Ubuntu Install Ubuntu etc I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated. Edit - I just tried running the hard drive as the master on the primary IDE and the CD drive as the slave on the primary with the same results. Maybe flash the BIOS?

    Read the article

  • PC wont boot with more than 1 stick of RAM.

    - by Aidan
    Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

    Read the article

  • PC wont boot with more than 1 stick of RAM.

    - by Aidan
    Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

    Read the article

  • Computer sending data while turned of

    - by Nicklas Ansman
    I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >