Search Results

Search found 2609 results on 105 pages for 'htc hd 7'.

Page 28/105 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

  - by IcarusNM

  I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

  Read the article

• I cannot change the screen brightness

  - by user1793249

  here's my problem: Ever since I installed Ubuntu 12.10 on my computer I haven't been able to change the screen brightness, it was always set to the maximum. I did take a look at this post: Decrease Backlight Below Minimum And it helped me resolved the issue with the unbearable brightness, however one problem persists: I cannot change it through "Brightness & Lock" or the function buttons (F2 and F3), when I press the buttons, the animation shows up but nothing happens. I tried the following: http://www.refreshit.info/2012/08/solved-brightness-increase-and-decrease.html It did nothing... If it helps: I have an HP-dv6 6185la, it has an ATI Radeon 6770M HD card and an Intel HD Integrated Graphics Card It only detects the "Intel® Sandybridge Mobile" Thanks in advance.

  Read the article

• Install Ubuntu on iMac 21.5" (mid 2011)

  - by Mystic Mark le Maverick

  I has a dual boot system with MacOSX 10.8.2 and Microsoft Windows 7 Home Premium x64. I would like to install Ubuntu alongside the two existing operating systems for cross platform development purposes. My System specs are listed below. iMac 21.5-inch (mid 2011) Intel Core i7 @2.80GHz AMD Radeon HD 6770M Facetime HD Internet Camera Thunderbolt port Wireless Airport adapter card Apple 8x Superdrive Apple Magic Mouse and wired keyboard with numeric keypad Will rEFIt install properly on my machine too? Thanks you very much for the help.

  Read the article

• Pfz.Caching - ViewIds instead of ViewStates

  Framework for caching data that includes the possibility to store ViewStates in files, reutilizing identical files as an way to avoid too much HD usage

  Read the article

• How to resize(increase) a root+home cloned partition from a smaller hdd?

  - by saulo

  Here is my story: I had a hd failing so I cloned it with dd to larger 500gb hd. It seemed to have worked well, but I have all this unallocated free space at the end of the disk (230gb). I tried to used gparted from a liveUSB to allocate all this space to my root+home partition (other than that I only have a small extended partition with the swap). It won't let me do this. I can only create another partition, or allocate the free space to the extend partition. I can however reduce the size of the root+home partition since I wasn't using all the space Is there a way to put this free space to my root+home partition after all? Or do I have to go with another partition. If so I'd like to separate my home from the root, reduce the root partition and create a ext4 logical home partition. What would be the best safest way to do this? Thanks so much in advance, aloha

  Read the article

• Clean install of 12.04 won't boot from HDD

  - by MarchingKazoo

  Downloaded 12.04.2. Made CD. Machine boots from CD as expected. Installed onto HD. Upon reboot, "Read error" message appears. Upon booting from CD, the HD appears as expected: One partition for Ubuntu, taking up about 12 gig, the rest empty. Lather, rinse, repeat five times. Results of "sudo fdisk -l": Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000dfa3e Device Boot Start End Blocks Id System /dev/sda1 * 2048 386596863 193297408 83 Linux /dev/sda2 386598910 390721535 2061313 5 Extended /dev/sda5 386598912 390721535 2061312 82 Linux swap / Solaris Should this be complicate? Seems no.

  Read the article

• Ubuntu will not install on my Dell Inspiron 580

  - by AndrewC

  I'm trying to install ubuntu on my Inspiron 580 (Intel Core i3 4Gb Ram Intel HD Graphics) but am having no success installing from CD or Windows installer all result in a purple rapidly flashing screen with the Ubuntu with 5 dots below it splash which doesn't change. I have tried releases 12.04.1 LTS (CD and windows installer), 11.10 (CD after reading it was certified for the 580) and today 12.10 (CD) all produce the same install failure. My Dell 1704PT monitor is connected to the intel HD board using an HDMI to DVI adaptor though I have tried a VGA cable and still got the same flashing screen. Any help gratefully received as i want to get away from Windows 7 Home Premium.

  Read the article

• camera preview on androd - strange lines on 1.5 version of sdk

  - by Marko

  Hi all, I am developing the camera module for an android application. In main application when user clicks on 'take picture' button, new view with SurfaceView control is opened and camera preview is shown. When users click on dpad center, camera takes picture and save it to the disc. Pretty simple and straightforward. Everything works fine on my device - HTC Tattoo, minsdkversion 1.6 ...but when I tested application on HTC Hero minsdkversion 1.5, when camera preview is shown,some strange lines occur. Anyone has idea what is going on? p.s. altough preview is crashed, taking of pictures works fine here is the picture: Thanx Marko

  Read the article

• android get contact phone number

  - by ng93

  hi, im trying to get a contacts name and phone number from the contacts list. im using: contactname = Curser.getString(Curser.getColumnIndex(Contacts.DISPLAY_NAME)); to get their name and it works fine. But using: contactphone = Curser.getString(Curser.getColumnIndex(ContactsContract.CommonDataKinds.Phone.NUMBER)); causes no warnings or errors and builds fine, yet force closes in both the emulator (2.1) and my htc desire (nexus one 2.2 rom/htc desire 2.1 rom). Any ideas how to fix it? oh and contactname and contactphone are both strings thanks, ng93

  Read the article

• Connecting PC via Bluetooth SNP

  - by Nicholas

  Hi, I have a widcomm example BluChat "WIDCOMM SDK RFComm Service" running on my PC with an USB dongle (BT-2400P). I would like to connect this chat from my HTC Desire. So I stared with the Java example http://developer.android.com/resources/samples/BluetoothChat/index.html. This is also using BT RFComm. If I'm using my HTC as a server it work's fine, but I would like to use my PC as a server. Then .connect() comes back with "Service Discovery Failure". I have modified the UUID string in the Java example to match the PC-application mmSocket = mmDevice.createRfcommSocketToServiceRecord(UUID.fromString("5fc2a42e-144e-4bb5-b43f-4e61711d1c32")); mmSocket.connect(); What is missing? Any help appreciated. Nicholas

  Read the article

• Is the use of a proxy required to consume a WCF service?

  - by Tone

  I have a WCF Service that I want my client to be able to consume from IIS without going through a proxy. The client was consuming asmx service in vbscript using the htc behavior: <div id="oWSInterop" style="behavior:url(webservice.htc)"></div> oWSInterop.useService "http://localhost/WSInteroperability.asmx", "WSInteroperability" Set response = oWSInterop.WSInteroperability.callServiceSync("BuildSingleDoc", 1002, 19499, XMLEncode(sAdditionalDetail)) So basically I just want to make this work with making as few changes as possible on the existing client. Am I forced to use a proxy when consuming a WCF service? I do understand the benefits of a proxy and am not opposed to using it for most other client implementations, but in this case I'm not sure I have the time to deal with it on the client - i just want it to work the way it has been with only the endpoint changing.

  Read the article

• Android application not working on 1.5 firmware?

  - by UMMA

  dear friends, i have created a single page application of showing phonebook data in a list. i am using 2.1 sdk in emulator and application works fine. but in my HTC hero firmware is 1.5 when i try to intall same application on HTC hero application is installed successfully but when i click on app icon it gives me force close error even i have set minsdkversion property in manifest file to 3 here is the log Cat [2010-05-17 12:28:18 - AddressBook]Starting activity com.example.AddressBook.AddressBook on device [2010-05-17 12:28:19 - AddressBook]ActivityManager: Can't dispatch DDM chunk 46454154: no handler defined [2010-05-17 12:28:19 - AddressBook]ActivityManager: Can't dispatch DDM chunk 4d505251: no handler defined [2010-05-17 12:28:20 - AddressBook]ActivityManager: Starting: Intent { comp={com.example.AddressBook/com.example.AddressBook.AddressBook} } please help me out whats wrong? any help would be appriciated.

  Read the article

• <embed> in HTML loaded by Webview Broken in Sense UI

  - by Justin

  I have a WebView that loads HTML that contains an <embed>. When loading in stock android (G1, NexusOne, Ion, etc) it looks fine and can be clicked on to watch it in the YouTube app. But when loading it using either the HTC EVO or Incredible (both Sense UI phones ) the space where the content should be is completely blank. Try this code below... Any ideas? I'm stumped. Certainly looks like an HTC Sense bug? WebView wv = (WebView) findViewById(R.id.wv1); wv.getSettings().setJavaScriptEnabled(true); wv.getSettings().setBuiltInZoomControls(true); wv.getSettings().setPluginsEnabled(true); wv.loadData("Here is the test embed: ", "text/html", "UTF-8"); In my testing, this will run fine on all Android versions, without SenseUI, but it shows blank for what looks like any SenseUI phone, so the user can't click on it.

  Read the article

• Layout Problem on Bigger resolution Phone like Nexus one?

  - by UMMA

  dear friends, i have created application using layout font sizes in "pixels" font and other layout looks fine on HTC hero and Motorola Droid but in nexus one which is bigger resolution phone every thing is messed up. for example , i have used font 18px which is bigger size in HTC Hero and Motorola but in Nexus one it is looking very small. same is the case with image height and width a banner looks fine on both phones but in nexus one very small. actually we dont have height and width in percentage thats why i am not able to solve this problem. layout_width="fill_parent" also not helping.. kindly help me out what should i do to make application look same in all the phones with different resolutions.

  Read the article

• Time machine disk icon on boot disk

  - by Ben Lings

  The icon for Macintosh HD (my boot disk) shows as a Time Machine disk. There is a file .com.apple.timemachine.supported in the root of the disk. If I delete the file and restart the computer, the icon goes back to a normal HD icon. However, the .com.apple.timemachine.supported file is recreated at some point on boot because when I log in again, the file has been recreated. If then reboot again, the icon goes back to being a Time Machine one. Any ideas about what is creating this file and why? More importantly - how can I get it to stop? It looks like something thinks the boot disk should be a Time Machine volume, but what? Console.app shows the following messages at approximately hourly intervals: 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Starting standard backup 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Cookie file is not readable or does not exist at path: /.<12 hex digits of MAC address for en0> 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Volume at path / does not appear to be the correct backup volume for this computer. (Cookies do not match) 19/01/2010 19:23:59 /System/Library/CoreServices/backupd[7459] Backup failed with error: 18 Other possibly relevant information: The boot HD isn't the original - the original failed so this is a SuperDuper'd clone of the original drive. I used to use the same disk for a SuperDuper clone as for Time Machine. These are the same same symptoms as this and this.

  Read the article

• NVidia ION and /dev/mapper/nvidia_... issues.

  - by Ritsaert Hornstra

  I have an NVidia ION board with 4 SATA ports and want to use that to run a Linux Server (CentOS 5.4). I first hooed up 3 HDs (that will be a RAID5 array) and a forth small boot HD. I first started to use the onboard RAID capability but that does not work correctly under Linux: the raid capacity is not a real RAID but uses lvm to define some arays. After setting the BIOS back to normal SATA mode and whiping the HDs, the first boot harddisk (/dev/sda) is seen as /dev/sda BEFORE mounting and after mounting as /dev/mapper/nvidia_. CentOS is unable to install on it (and grub is not installable on it either). So somehow the harddisk is still seen as if it belongs to some lvm volume. I tried to clean out the HD by issuing a few dd if=/dev/zero of=/dev/sda commands to wipe the starting cylinders and final cylinders but to no avail. Did anyone see this problem and did anyone find a solution? UPDATE When I create only a single ext3 partition on the first HD (/dev/mapper/nvidia_...) no LVM partitions are seen and I can boot from /dev/mapper/nvidia_.... Now the next step is to see how I can get rid of this folly.

  Read the article

• Resize Debian in VirtualBox

  - by Poni

  I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

  Read the article

• How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

  - by McCoy

  Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

  Read the article

• Why my hard disk can't boot from the BIOS?

  - by Mario

  I installed a new sata DVD burner. When I turned on the machine (windows 7) it didn't boot. It can boot from a lubuntu CD. There is an option on lubuntu to boot form the first hard disk. If I select it, the machine boots normally to windows 7. So from the CD I can boot but not from the BIOS. I checked all the options more than once: boot from HD, not boot from removable, boot from USB, boot from optical. The order of the boot sequence is HD then DVD. I tried booting only with the HD; I disconnected both DVDs. I even tried recovery of the MBR: bootsect, bootrec, fixmbr, buildbcd, nt60, etc. So, the question is, does this have a reason, what's the difference between booting from the BIOS (as I think) to from the DVD?. The BIOS is intel, it has BIOS codes on the right bottom corner, it stays at 5A for a while. 5A is "Resetting PATA/SATA bus and all devices".

  Read the article

• Windows Bluescreen - atikmpag.sys

  - by Mochan

  Information Name: atikmpag.sys bluescreen (BSOD or BlueScreen of Death) Error code: 0x00000116 Appears when: Playing games, watching videos Can be reproduced: Yes Cause: Graphics Card is the main assumption System Specifications Before we begin - I will inform you of my specifications. OS: Windows 7 x64 Home Edition Model: Dell Inspiron 15R Special Edition (aka Inspiron 7520) (Add 2GB of RAM to the model linked) Hard Drive: 1TB CPU: Intel Quad-Core i7 Sandy Bridge (I think) Processor at 2.10GHz (I think it can be clocked to 3GHz?) RAM: 6GB (I think 1 x 4GB and 1 x 2GB) Display: 15.6" HD (1366x768) Graphics: AMD Radeon HD 7500M 2GB Details So now that you know some basics about my computer, I'll get to the problem. Being an Ubuntu user I hardly use Windows, but occasionally I do. Like to run Skyrim and other games incompatible with Linux and WINE. The new Sims 3 Seasons patch is also now not supported. When playing these two games and other ones, theoretically. I have also heard others saying that while watching HD movies and video series it also happens. While watching the bluescreen as it happens, I see it is the 'atikmpag.sys' error. I have not installed much and nothing significant. I think I have downloaded Skyrim, Firefox and The Sims 3. I haven't done much more... since Ubuntu is definitely the best in comparison! (No hate, just a joke :P). I can reproduce it easily (just by running a game for less than a minute). It is always there each time, but it's never at a specific time or anything. So far I have found that it may be caused by lack of power to the graphics card, or it may be damaged or fried. Since I've had the computer for a mere 4 months (and have had other problems with it also). I have contacted Dell but they are useless beyond belief. Anyone with any information, solutions or details are encouraged to share your knowledge, as it would be immensely appreciated.

  Read the article

• Toshiba External Hard Drive freezes computer

  - by Ephraim

  I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

  Read the article

• How can I connect integrated webcam with virtualbox

  - by Mike Stumpf

  I am trying to use a Windows XP VM for VirtualBox on my Windows 8.1 laptop. I have tried the usual attaching USB device but I get an error saying "USB device is busy with previous request". My webcam is not active in any applications and this happens after a clean reboot of the host, the guest, and VirtualBox. Here are the details: Host -HP Pavilion 17 Notebook PC (stock) -Windows 8.1 -AMD A10-5750M APU -HP Truevision HD (integrated webcam) VM I got the VM here: http://www.modern.ie/en-us/virtualization-tools VirtualBox -VirtualBox 4.3.12 installed -VirtualBox Extension pack installed -Guest additions are installed for 4.3.12 -Enable USB Controller is checked -It does not matter if enable 2.0 controller is checked or not -It does not matter if a USB device filter is set up for the webcam or not -Here is the error message: Failed to attach the USB device DDFEQ01G45BFBV HP Truevision HD [0004] to the virtual machine IE8 - WinXP. USB device 'DDFEQ01G45BFBV HP Truevision HD' with UUID {7a2e2a45-974d-482b-9b4e-9f9abbcd0ebb} is busy with a previous request. Please try again later. Result Code: E_INVALIDARG (0x80070057) Component: HostUSBDevice Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee: IConsole {8ab7c520-2442-4b66-8d74-4ff1e195d2b6} I read on some VirtualBox forums that disabling USB 2.0 support in the host BIOS solved their issue but I wanted to know if there were any other ideas before I muck around in there. Thanks

  Read the article

• How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

  - by McCoy

  Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

  Read the article

• Ubuntu and Windows and Separate HDs, oh my!

  - by LuxuryMode

  Need some major help. Running a Dell XPS/Dimension 630i. It came with "SATA 2 RAID 0 With Dual 500GB Hard Drives." I have installed a new, third non-raided drive and installed Ubuntu on it. So now I have Windows on the original hard drive and Ubuntu Linux on the new HD. When I get to the boot menu where I can select an OS, if I select windows I get an error: "No such drive, no such disk." Also, strangely in the first place, in order to even get to the bootloader menu I have had to disable ALL ports under the RAID config. Unless I do this, I will just get to a never-ending blinking cursor. I have tried every conceivable CMOS config and nothing else works. Tried setting port 3 (the new HD w/ Ubuntu) to first hard disk boot priority. Tried disabling all other ports and enabling the Ubuntu HD port and vice versa. Here's a pic of the error I get when I try to boot to Windows: http://imgur.com/TJ1mS. Also, please note that I can actually access all files from the raided Windows drive through Ubuntu. (Someone suggested just reinstalling windows from installation CD. Agree?)

  Read the article

• Help with Ubuntu and Windows, separate HDs

  - by LuxuryMode

  Need some major help. Running a Dell XPS/Dimension 630i. It came with "SATA 2 RAID 0 With Dual 500GB Hard Drives." I have installed a new, third non-raided drive and installed Ubuntu on it. So now I have Windows on the original hard drive and Ubuntu Linux on the new HD. When I get to the boot menu where I can select an OS, if I select windows I get an error: "No such drive, no such disk." Also, strangely in the first place, in order to even get to the bootloader menu I have had to disable ALL ports under the RAID config. Unless I do this, I will just get to a never-ending blinking cursor. I have tried every conceivable CMOS config and nothing else works. Tried setting port 3 (the new HD w/ Ubuntu) to first hard disk boot priority. Tried disabling all other ports and enabling the Ubuntu HD port and vice versa. I have some pictures of boot up: first one is strange error i get after messing with CMOS to finally get ubuntu install to work. http://imgur.com/5sqJa then boot menu: http://imgur.com/TWtLq then error: http://imgur.com/TJ1mS. Also, please note that I can actually access all files from the raided Windows drive through Ubuntu.

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >