Search Results

Search found 26977 results on 1080 pages for 'input device'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 28/1080 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • network manager says "device not managed"

    - by Daniella Glover
    I used to be able to share my network connection by editing the Auto Eth0 to share with other computers in the Ipv4 section and now I upgraded my laptop to 11.10 . Now are there no wired connections in the network manager. When I click my connections applet at the top of the tray it also says wired device not managed! when I type ifconfig -a daniella@daniella-1001HA:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 eth0:avahi Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc inet addr:169.254.13.40 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:45 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:25:d3:90:43:41 inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe90:4341/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12881 errors:0 dropped:0 overruns:0 frame:0 TX packets:12867 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8851081 (8.8 MB) TX bytes:2343199 (2.3 MB)

    Read the article

  • Developing an iOS app for a single device - licensing issue

    - by bfavaretto
    I'm developing an iOS app for a museum as a freelancer. It's a very simple video player, to be installed on a single iPad that will be part of a permanent exhibition, basically acting as a kiosk. It turns out the iPad is the ideal device for that if you're looking for a small and affordable touchscreen. The problem is: as far as I can tell, none of the Apple Developer Program options available will allow me to distribute an app like that. The relevant options are (from the link above): iOS Developer Program ($99/year) Select this program if you would like to distribute apps on the App Store as an individual, sole proprietor, company, organization, government entity or educational institution. iOS Developer Enterprise Program ($299/year) Select this program if you would like to develop proprietary apps for internal distribution within your company, organization, government entity or educational institution. The regular program requires distribution through the App Store. The Enterprise version is for internal distribution within my own organization. Neither is the case here! It seems like I'm doomed to violate Apple's terms of service (and I can think of at least two ways of doing that: jailbreaking, or changing the iPad's date so it won't know the provisioning profile expired). Is that really so, or did I get the descriptions wrong? Has anyone here been in a similar situation?

    Read the article

  • C String input confusion

    - by ahref
    C really isn't my strong point and after reading 3 chapters of a book on the subject and spending ages trying to get stuff working it just doesn't: #include <stdio.h> char *a,*b; int main( ) { char input[10]; fgets(input,sizeof input, stdin); a = input; fgets(input,sizeof input, stdin); b = input; printf("%s : %s",a,b); } I've isolated the problem from my main project. This code is meant to read in two strings and then print them however it seems to be setting a and b to point to input. Sample output from this code when A and B are entered is(don't worry about the \n's i can remove them): A B B : B How do i store the value of input in another variable eg. a or b so that in the above case A B A : B Is output? Thanks

    Read the article

  • SSIS - Access Denied with UNC paths - The file name is a device or contains invalid characters

    - by simonsabin
    I spent another day tearing my hair out yesterday trying to resolve an issue with SSIS packages runnning in SQLAgent (not got much left at the moment, maybe I should contact the SSIS team for a wig). My situation was that I am deploying packages to a development server, and to provide isolation I was running jobs with a proxy account that only had access to the development servers. Proxies are an awesome feature and mean that you should never have to "just run the job as sysadmin". The issue I was facing was that the job step was failing. The job step was a simple execution of the package.The following errors appeared in my log file. I always check the "Log step output in history" for a job step, this ensures you get all the output from the command that you run. I'll blog about this later. If looking at the output in sysdtslog90 then you will have an entry with datacode -1073573533 and error message File or directory "<filename>" represented by connection "<connection>" does not exist.  Not exactly helpful. If you get the output from the console then you will also get these errors. 0xC0202070 "The file name property is not valid. The file name is a device or contains invalid characters." 0xC001401E "specified in the connection was not valid." It appears this error is due to the use of a UNC path and the account runnnig the package not having access to all the folders in the path. Solution To solve this you need to ensure that the proxy account has access to ALL folders in the path you are accessing. To check this works, logon as the relevant proxy user, or run a command window as the specified user. Then try and do net use \\server\share and then do a dir for each folder in the path and check you have access. If these work and you still have the problem then you have some other problem, sorry. The following are posts on experts exchange that also discuss this,http://www.experts-exchange.com/Microsoft/Development/MS-SQL-Server/SSIS/Q_24056047.htmlhttp://www.experts-exchange.com/Microsoft/Development/MS-SQL-Server/SSIS/Q_23968903.html This blog had a post about it being a 64 bit issue. That definitely wasn't the issue for me as I was on a 32 bit server http://blogs.perkinsconsulting.com/post/64-bit-SQL-Server-2005-SSIS-and-UNC-paths-Part-2.aspx  

    Read the article

  • Cannot find root device after latest kernel upgrade

    - by DisgruntledGoat
    I'm running Ubuntu 13.04. Yesterday I tried to install updates but there was an error, and it suggested running apt-get -f install which I did. Now when I try to boot, I get an error "Gave up waiting for root device". The text is almost identical to the text shown in this and this question. However, the "built-in shell" simply doesn't work! Nothing I type shows up on the screen or does anything. I tried adding a rootdelay to grub but it just waits longer and shows the same screen. Loading the previous kernel works (although there are a few graphics glitches) but as far as I can tell, it should be booting the exact same stuff. The new kernel is 3.8.0-31-generic and the previous working one is 3.8.0-25-generic. Here is my entire /boot/grub/menu.lst file, comments removed: default 0 timeout 3 title Ubuntu 13.04, kernel 3.8.0-31-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-31-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac rootdelay=120 ro quiet splash initrd /boot/initrd.img-3.8.0-31-generic quiet title Ubuntu 13.04, kernel 3.8.0-31-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-31-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-31-generic title Ubuntu 13.04, kernel 3.8.0-25-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-25-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro quiet splash initrd /boot/initrd.img-3.8.0-25-generic quiet title Ubuntu 13.04, kernel 3.8.0-25-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-25-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-25-generic title Ubuntu 13.04, kernel 3.8.0-23-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-23-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro quiet splash initrd /boot/initrd.img-3.8.0-23-generic quiet title Ubuntu 13.04, kernel 3.8.0-23-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-23-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-23-generic title Ubuntu 13.04, memtest86+ uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/memtest86+.bin quiet title -------------------------------- root title Windows Vista rootnoverify (hd0,2) savedefault makeactive chainloader +1 As you can see the UUID is the same for all kernels. Why am I getting this problem, and what can I do to fix it?

    Read the article

  • Networking gampeplay - Sending controller inputs vs. sending game actions

    - by liortal
    I'm reading about techniques for implementing game networking. Some of the resources i've read state that it is a common practice (at least for some games) to send the actual controller input across the network, to be fed into the remote game's loop for processing. This seems a bit odd to me and i'd like to know what are the benefits of using such a method? To me, it seems that controller input is merely a way to gather data to be fed into the game, which in turn determines how to translate these into specific game actions. Why would i want to send the control data and not the game actions themselves?

    Read the article

  • Log Debug Messages without Debug Serial on Shipped Device

    - by Kate Moss' Open Space
    Debug message is one of the ancient but useful way for problem resolving. Message is redirected to PB if KITL is enabled otherwise it goes to default debug port, usually a serial port on most of the platform but it really depends on how OEMWriteDebugString and OEMWriteDebugByte are implemented. For many reasons, we don't want to have a debug serial port, for example, we don't have enough spare serial ports and it can affect the performance. So some of the BSP designers decide to dump the messages into other media, could be a log file, shared memory or any solution that is suitable for the need. In CE 5.0 and previous, OAL and Kernel are linked into one binaries; in the other word, you can use whatever function in kernel, such as SC_CreateFileW to access filesystem in OAL, even this is strongly not recommended. But since the OAL is being a standalone executable in CE 6.0, we no longer can use this back door but only interface exported in NKGlobal which just provides enough for OAL but no more. Accessing filesystem or using sync object to communicate to other drivers or application is even not an option. Sounds like the kernel lock itself up; of course, OAL is in kernel space, you can still do whatever you want to hack into kernel, but once again, it is not only make it a dirty solution but also fragile. So isn't there an elegant solution? Let's see how a debug message print out. In private\winceos\COREOS\nk\kernel\printf.c, the OutputDebugStringW is the one for pumping out the messages; most of the code is for error handling and serialization but what really interesting is the following code piece     if (g_cInterruptsOff) {         OEMWriteDebugString ((unsigned short *)str);     } else {         g_pNKGlobal->pfnWriteDebugString ((unsigned short *)str);     }     CELOG_OutputDebugString(dwActvProcId, dwCurThId, str); It outputs the message to default debug output (is redirected to KITL when available) or OAL when needed but note that highlight part, it also invokes CELOG_OutputDebugString. Follow the thread to private\winceos\COREOS\nk\logger\CeLogInstrumentation.c, this function dump whatever input to CELOG. So whatever the debug message is we always got a clone in CELOG. General speaking, all of the debug message is logged to CELOG already, so what you need to do is using celogflush.exe with CELZONE_DEBUG zone, and then viewing the data using the by Readlog tool. Here are some information about these tools CELOG - http://msdn.microsoft.com/en-us/library/ee479818.aspx READLOG - http://msdn.microsoft.com/en-us/library/ee481220.aspx Also for advanced reader, I encourage you to dig into private\winceos\COREOS\nk\celog\celogdll, the source of CELOG.DLL and use it as a starting point to create a more lightweight debug message logger for your own device!

    Read the article

  • Cannot use apt-get/dpkg -- Input/output error

    - by mecho
    I have bumped into an issue that doesn't allow me to do anything related to apt-get: install, remove, etc. Whenever I try to do something (e.g. sudo apt-get install firefox -f) it gives me the same error message: Reading database ... dpkg: unrecoverable fatal error, aborting: unable to open files list file for package `fontconfig-config': Input/output error E: Sub-process /usr/bin/dpkg returned an error code (2) I have tried to deal with the package `fontconfig-config' without success. I have found that the "Input/output error" is usually linked with physical problems of the hd, but I do not think that's the case I am using that hd without any other problem. I have tried removing the mention to the package in /var/lib/dpkg/status as mentioned here. I have tried deleting all files related to the package in /var/lib/dpkg/info as I found somewhere. But I still cannot do anything. The funny bit comes when I look for the file that is giving me troubles: mecho@Ansible-MS-7680:/var/lib/dpkg/info$ ls fontconfig* ls: cannot access fontconfig-config.list: Input/output error fontconfig.list fontconfig.postinst fontconfig.preinst fontconfig.triggers fontconfig.md5sums fontconfig.postrm fontconfig.prerm This is done after I deleted all files ... it looks like fontconfig-config.list still exists but it doesn't show up! Any idea about how to solve the problem? I am on kubuntu precise, fontconfig-config_2.8.0-3ubuntu9.1

    Read the article

  • Acer Allionone Z5810 Touchscreen Issues 12.04

    - by Johannes
    I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • ubuntu 13.04 recognizes usb mobile broadband modem as ethernet connection

    - by Bence Mihalka
    When I plug in my usb mobile broadband modem (ZTE MF-667), in the network manager instead of a mobile broadband connection, I get an ethernet connection, called: Ethernet Network (ZTE WCDMA Technologies MSM), which of course doesn't work. Here is my lsusb output and the relevant parts of dmesg output: lsusb: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 001 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM dmesg: [ 195.328467] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 195.423545] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1225 [ 195.423555] usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 195.423561] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 195.423567] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 195.423572] usb 2-1.1: SerialNumber: P680A1ZTED000000 [ 195.426319] scsi7 : usb-storage 2-1.1:1.0 [ 196.425354] scsi 7:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 197.447919] usb 2-1.1: USB disconnect, device number 3 [ 197.457582] sr0: scsi3-mmc drive: 243x/186x xa/form2 cdda pop-up [ 197.457594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 197.459058] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 197.459483] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 197.759186] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 197.854543] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1405 [ 197.854556] usb 2-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=5 [ 197.854564] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 197.854572] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 197.854579] usb 2-1.1: SerialNumber: P680A1ZTED010000 [ 197.957739] scsi8 : usb-storage 2-1.1:1.2 [ 198.076554] cdc_ether 2-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 00:a0:c6:00:00:00 [ 198.076583] usbcore: registered new interface driver cdc_ether [ 198.955985] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 198.956797] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 I created the appropriate mobile broadband connection manually, but I cannot enable it in network manager, since the device is not recognized as mobile broadband. Any tips how to make it work?

    Read the article

  • Set iPhone Style Location Based Alerts On Your Android Device With Google Now

    - by Gopinath
    Location based alerts of iPhone are very useful. You can set an alert to popup as soon as you reach a specific location like “Pickup milk and eggs” when I’m near a grocery store. This feature was missing in Android for a long time, but last week at Google I/O conference Google released an update to Google Now which supports location based alerts. To setup a location based alert 1. Launch Google Now 2. Type or say add reminder 3. By default it shows time based alert interface, switch it location based by touching Location icon 4. Set reminder text, choose a location and touch Set reminder 5. Your alert is set now and as soon as you are close by the specified location, you’ll see an alert on your device. This is a nice feature and I’m using it quite often for the past couple of days.  There are couple of things missing from the current version of Google Now location based alerts– recurring alerts and ability to set alerts on leaving a specific location. It is not possible to recur location based alerts. You will be alerted only once as soon as you reach the location and it is not possible to repeat the alert next time you visit the location. Lets say you want to be reminded to say hi to friend’s parents whenever you are travelling close by their home. It does not work. The second missing feature is something basic and some how Google did not incorporate in their first iteration. Lets say you are at office now and you want to set up alert to pickup flowers when you leave office. Sounds like a simple use case for location based alerts right? But there is no way to set this type of alerts. Google Now alerts you as soon as you reach a location, but not when you leave a location. Do you have an Android that supports Google Now? If so what are your thoughts on location based alerts?

    Read the article

  • WWW.yoursite.com or HTTP://yoursite.com which one is futureproof?

    - by Sam
    http://yoursite.com www.yoursite.com http://www.yoursite.com yoursite.com Which of these would you choose as your favourite to work with, if you were to make a site for 2011 and beyond, which domainname would you provide to clients, websites linking to you, your letterhead, contact cards. Why one OR other? Which to avoid? Thinking of the following aspects: validity, correctly loading URL audience, most geeks know http://, most seniors/clients don't easiest to remember / URL as a brand misspellings by user input (in mobile phone or desktop browser) browsers not understanding protocol-less links total length of chars for easy user input method of peferance by major search engines/social media sites consistency sothat links dont fragment but all point to the same

    Read the article

  • How do I simulate the mouse and keyboard using C# or C++?

    - by Art
    I want to start develop for Kinect, but hardest theme for it - how to send keyboard and mouse input to any application. In previous question I got an advice to develop my own driver for this devices, but this will take a while. I imagine application like a gate, that can translate SendMessage's into system wide input or driver application with API to send this inputs. So I wonder, is there are drivers or simulators that can interact with C# or C++? Small edition: SendMessage, PostMessage, keybd_event will work only on Windows application with common messages loop. So I need driver application that will work on low, kernel, level.

    Read the article

  • Alfa AWUS036H USB wireless adapter not recognized

    - by GFiasco
    The Alfa AWUS036H USB wireless adapter will not be recognized by my netbook (Ubuntu 14.04, Asus X201E). As I understand it, the drivers should already be built in to this version of Linux, but I tried a make/make install of the latest Realtek drivers (as mentioned on How do I install drivers for the Alfa AWUS036H USB wireless adapter?) and it didn't work. I then followed the advice of this thread (ALFA AWUS036NH driver) and did a make/make install of the most up-to-date backport of the drivers, but that didn't work. At this point I tried a series of commands from this thread (http://ubuntuforums.org/showthread.php?t=2187780) in an attempt to identify the problem, but at no point could I get the laptop to ever recognize the USB adapter. I have also troubleshot the USB cable itself, tried both the USB 2.0 and 3.0 ports on the laptop, have never received an error message regarding a need to update the firmware, and have seemingly successfully installed all manner of variation of Realtek drivers which were supposed to make the adapter work. (I also tried to delete/clean up after each install, in the hope I wasn't making things worse.) Not sure what I should do next. Please let me know if I need to post any more information. Thanks very much for your help. EDIT: Before inserting Alpha USB adapter: :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub After inserting Alpha USB adapter (USB 3.0 port, no change): :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Ran tail -f /var/log/syslog, inserted device, no recognition (last entry is dated 16:17:01, so an hour ago). Going to check on an Ubuntu 14.04 laptop and Windows XP desktop. I'll update after. Thanks for your help to this point.

    Read the article

  • Checking whether a specific key was pressed in enchantJS

    - by MxyL
    I am using enchantJS and would like to use the letters and numbers as well as numpad on a keyboard to do different things (eg: hotkeys). From this page http://users.csc.calpoly.edu/~foaad/enchant/guide/playerInput.html By default, enchant.js provides input listeners for six buttons: UP, DOWN, LEFT, RIGHT, A, and B. By default, the directions are bound to the arrow keys. Any of the six buttons may also be bound to any key with an ASCII value. We’ll address that later. So enchant provides the ability to bind keys to different input such as up, down, left, right...but how can I simply check whether the D or X key was pressed, and if so, perform certain actions based on that event?

    Read the article

  • Wake up from sleep with GPIO (I2C)

    - by spambas
    My situation: Ubuntu 10.10 running on an atom driven main board the main board has a GPIO chip integrated (F75111 by Fintek). They communicate through I2C(SMBus). We have a driver running that works, we can send outputs and read inputs. Great! We would like to use the I/O interface to suspend (sleep) and wake up again. Sleep is no problem. On an incoming input: run s2both. Ubuntu goes to sleep and prepares a hibernate state, so when the power-cord is unplugged by accident, it will wake from hibernate. But the big question: how to wake on an input if the OS is already sleeping! You can wake from a lot of devices (lan, usb, ring, etc) but I can't find out how to wake from a I2C card. PLEASE HELP!

    Read the article

  • Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

    - by IcarusNM
    I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

    Read the article

  • Sony Ericsson Windows driver problem

    - by alex
    I've installed Update Service and MediaGo for my Sony Ericsson phone but one of the drivers that was installed along with the software is causing problems in Windows 7 x64. Looking in the Event Log I see the following warning: Detected unrecognized USB driver (\Driver\seehcri) This is the driver corresponding to the Sony Ericsson seehcri Control Device. The failure to recognize the USB driver is causing problems with other services, namely the VMware USB Arbitration Service. It should normally start automatically but, due to the failure to recognize the seehcri USB driver, it fails with the following error: Error 31: A device attached to the system is not functioning. Disabling the driver has not helped at all. The VMWare service still refuses to start and I keep getting both warnings in the Event Log. I would like to remove the Sony Ericsson driver but unfortunately, that's not possible. Uninstalling the Sony Ericsson seehcri Control Device from Device Manager causes Windows to almost completely freeze up while trying to look for drivers for unrecognized hardware. Windows tries over and over again to locate and install drivers for an Unknown device, failing every time. Looking in Device Manager, it simply fills up with hundreds of unknown devices, also using up the CPU to almost 85% in the process. What should I do? How can I safely remove the driver without causing Windows to look for a new driver?

    Read the article

  • How can I find out which processes on my computer are accessing the microphone?

    - by Vinayak
    After reading this interesting Lifehacker post and reading the comments on the page, one person was wondering if it would be possible to use the Physical Device Object Names of other hardware such as the microphone to find out the names of processes using that device. I tried the same approach, but so far it only seems to work for the webcam. Is there any other way I could get this to work in Process Explorer? UPDATE: The Lifehacker post was about finding out which Windows process is currently using your webcam. This is how they went about doing it: Start Device Manager (WIN+R → "devmgmt.msc" → OK) Find your webcam among the list of devices (check under Imaging Devices) Open the properties window of the device and switch to the Details tab (Right click → Properties → Details) In the dropdown menu, select Physical Device Object Name and copy the string(Right click → Copy) Download Process Explorer Make sure you have opened Process Explorer in Administrator Mode(File → Show Details for All Processes) Hit CTRL+F and enter the string you copied earlier(it should be something like \Device\000000XX) Hit the Search button and you should see a list of processes using the webcam(if there are any)

    Read the article

  • How do you test your blackberry application on the device?

    - by Kai
    This may sound very noobish, but I can't seem to get my app to my blackberry. I was trying to follow the beginning blackberry development book's guide, but maybe I just missed the point somewhere. For remote download, Is it really as simple as drop the COD and JAD files in the same folder on your server then just navigate to the URL with your device's browser? The book says it should prompt a download screen, but all I get is a page full of cryptic characters. My app is a simple slideshow. Uses no signed things and is not MDS enabled. Did I forget something? Any help would be appreciated. Thanks

    Read the article

  • Why can't I input the integers from a file?

    - by Anthony Glyadchenko
    I'm trying to get this C++ code to input a series of numbers from a text file: int x = 0; cin >> x; ifstream iffer; int numbers[12]; iffer.open("input.txt"); for (int i = 0; i < 12; i++){ iffer >> numbers[i]; } This doesn't seem to work on the Mac. Every cell will equal to 0 regardless of the values in the text file. In other words, the ifstream isn't assigning the numbers. How can I make this work? Is it a Mac issue and if so, how can I get it to work? Thanks! Anthony Glyadchenko

    Read the article

  • Very Intermittent Orientation on Device & Simulator

    - by Michael Waterfall
    I've noticed that I'm getting very intermittent orientation on my device & the simulator. I have a modal view controller that I present, and that is the only thing in my app which supports rotation. If I launch the app in portrait without moving the device, open the modal VC and then rotate the device, it usually works. However sometimes if I open the app holding the device in landscape, then rotate to portrait, launch the VC and then rotate the device, no rotation occurs. It seems very intermittent. Sometimes if I launch the app in portrait mode and then open the VC and rotate the device, nothing happens, and until I quit and relaunch it no orientation occurs in the app. It's strange because 50% of the time it works! Whenever I launch it through Xcode and set breakpoints in shouldAutorotateToInterfaceOrientation it always works! Anyone ever had this or know what's going on?

    Read the article

  • Question about Linux Device Drivers.

    - by smwikipedia
    I have just installed the Xubuntu. My box runs quite slower than before when installed with a Win7. I am wondering if I am missing some device drivers. I can use gnome-device-manager to list my devices. In the device list view, I saw several blue question mark on the left side of devices. Based on my windows experience, the question mark should indicate the device is not properly configured. Is it the same with gnome-device-manager? And most importantly, how could I know for sure whether or not the corresponding device drivers have been installed? Many thanks.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >