Search Results

Search found 1716 results on 69 pages for 'macbook'.

Page 28/69 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Automatically allowing SSH into a machine behind a UPNP router?

    - by GJ
    Hi I have a MacBook connecting to the Internet from behind various routers from time to time (home, office, etc). All of the routers support UPNP. I need to allow a co-worker to SSH into the machine, without configuring each router each time to forward port 22 to the MacBook. Is there any way to get the MacBook to use UPNP (or some other method) to automatically configure any supporting router that it is behind to forward port 22 to itself? That would allow the co-worker to SSH into the MacBook but just knowing its external IP, which is easy.

    Read the article

  • How do I use an SSH public key from a remote machine?

    - by kubi
    Setup The public keys are set up on a Macbook. I can do a passwordless push to github and a server (iMac) on the local network. The Problem I know the keys are partially setup correctly, because I everything works if I'm sitting at the Macbook. What doesn't work is when I SSH into the Macbook remotely and attempt to push to github or to the iMac server. I'm prompted to input my SSH key passphrase. What am I missing to enable pushing to github from the Macbook while logged in remotely from the iMac?

    Read the article

  • Apache on Mac Mavericks issue

    - by Michael
    Trying to run Apache so that I can create a testing server on my mac.When I start apache it starts, but it doesn't run (no connection to local host. Ill upload the unix,you'll see that after starting there is no processes, and I did a check to show you what was running on my port 80... I don't entirely know that means. Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start Michaels-MacBook-Pro-3:~ michaelramos$ ps aux | grep httpd michaelramos 348 0.0 0.0 2442000 624 s000 S+ 8:51AM 0:00.00 grep httpd Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start org.apache.httpd: Already loaded Michaels-MacBook-Pro-3:~ michaelramos$ sudo lsof -i ':80' COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ocspd 96 root 18u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 20u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 21u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED) ocspd 96 root 23u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED)

    Read the article

  • Mac OSX DHCP Stopped Working [on hold]

    - by Jesse James Richard
    Tethering a Raspberry PI to a MacBook (Mavericks) via ethernet is proving to be a real pain. This worked for about a day. My MacBook required a rare reboot and once it came back up the Pi won't get an address. I've confirmed it's not a problem with the Pi. It's a problem with the MacBook for sure. It's basically just stopped giving out IPs. I've read as much as I've found about how to fix this friggin' problem, but I've thus far come up blank. Internet sharing Wi-fi Ethernet enabled, and/or Edited /etc/bootpd.plist as described here (http://www.jacquesf.com/2011/04/mac-os-x-dhcp-server/ - this worked initially and now no longer does) Pi connected directly to the router has no problems. My MacBook DHCP server will no longer give out addresses. Any help would be much appreciated.

    Read the article

  • Can't burn 8.1G iso onto 8.4GB DVD - "Media does not have enough free space"

    - by Max Williams
    I'm trying to burn a dvd on a mac with an external (firewire-connected) dvd drive. I'm checking the size of the iso thus: DVD-4:dvd_files macbook$ ls -l /tmp/hybrid.iso -rw-r--r-- 1 macbook wheel 8700884992 Aug 22 10:57 /tmp/hybrid.iso DVD-4:dvd_files macbook$ ls -lh /tmp/hybrid.iso -rw-r--r-- 1 macbook wheel 8.1G Aug 22 10:57 /tmp/hybrid.iso The "human-readable" size is 8.1 Gig but when i try to burn, onto an 8.4G dual-layer dvd, it says "Media does not have enough free space" The definition of a "Gigabyte" according to Wikipedia is 1 billion bytes, so the iso size should actually be 8.7 Gig according to this definition, in which case the disk definitely isn't big enough, and it's just that the -h option to ls is misleading. Is the discrepancy just due to the ls command using a different definition of "G" (eg 1024 Meg aka 1.07 Gig? This comes out as 8.103 which fits what ls is displaying)

    Read the article

  • .NET development on Macs

    - by Jeff
    I posted the “exciting” conclusion of my laptop trade-ins and issues on my personal blog. The links, in chronological order, are posted below. While those posts have all of the details about performance and software used, I wanted to comment on why I like using Macs in the first place. It started in 2006 when Apple released the first Intel-based Mac. As someone with a professional video past, I had been using Macs on and off since college (1995 graduate), so I was never terribly religious about any particular platform. I’m still not, but until recently, it was staggering how crappy PC’s were. They were all plastic, disposable, commodity crap. I could never justify buying a PowerBook because I was a Microsoft stack guy. When Apple went Intel, they removed that barrier. They also didn’t screw around with selling to the low end (though the plastic MacBooks bordered on that), so even the base machines were pretty well equipped. Every Mac I’ve had, I’ve used for three years. Other than that first one, I’ve also sold each one, for quite a bit of money. Things have changed quite a bit, mostly within the last year. I’m actually relieved, because Apple needs competition at the high end. Other manufacturers are finally understanding the importance of industrial design. For me, I’ll stick with Macs for now, because I’m invested in OS X apps like Aperture and the Mac versions of Adobe products. As a Microsoft developer, it doesn’t even matter though… with Parallels, I Cmd-Tab and I’m in Windows. So after three and a half years with a wonderful 17” MBP and upgraded SSD, it was time to get something lighter and smaller (traveling light is critical with a toddler), and I eventually ended up with a 13” MacBook Air, with the i7 and 8 gig upgrades, and I love it. At home I “dock” it to a Thunderbolt Display. A new laptop .NET development on a Retina MacBook Pro with Windows 8 Returning my MacBook Pro with Retina display .NET development on a MacBook Air with Windows 8

    Read the article

  • Ruby on Rails undefined method `camelize' for "app":String

    - by Lukasz
    Hi! I just tried to play with Ruby on Rails on Snow Leopard. I was following this tutorial: http://developer.apple.com/tools/rubyonrails.html Whatever I try to do with rails I end up with: MacBook-Pro-lm:~ lukasz$ rails blog **undefined method `camelize' for "app":String** MacBook-Pro-lm:~ lukasz$ rails --help **undefined method `camelize' for "app":String** Really basic things... however - verbosing rails works: MacBook-Pro-lm:bin lukasz$ rails -v Rails 2.3.5 MacBook-Pro-lm:~ lukasz$ ruby -v ruby 1.8.7 (2010-01-10 patchlevel 249) [i686-darwin10] MacBook-Pro-lm:bin lukasz$ gem -v 1.3.7 So it seems I have installed and upgarded ruby (using macports), rubygems and rails successfully (according to terminal). There are also few other packages installed to support we development like passenger and mysql5, etc... I can find ruby installed in the /opt/local/bin directory. My environment PATH variable is: PATH=/opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin The is something fishy going on. It must be some stupid basic problem. Google says that there could be a problem with ruby-iconv library but I can not find/install this package using port or gem commands. Plese help.... what am I missing here?

    Read the article

  • Trying to find a good strategy using Git for personal development on local/personal machine

    - by AJ
    A noob here. I have a personal Macbook and I want to use Git to track the changes etc. I want to just init a repo on my macbook and work there. Is this a good idea? What if: I have a main repo somewhere in my Macbook HD, like, /Users/user/projects/project1 and clone it to another area on my macbook where I actually perform development? But there is a lot of redundancy in this. I am a little confused and want to know what are the usual steps folks take in a similar personal development environment. Thanks a lot.

    Read the article

  • CGContextFillEllipseInRect: invalid context

    - by hakewake
    Hi all, when I launch my app, I keep getting this CGContextFillEllipseInRect: invalid context error. My app is simply to make the circle 'pinchable'. The debugger shows me this: [Session started at 2010-05-23 18:21:25 +0800.] 2010-05-23 18:21:27.140 Erase[8045:207] I'm being redrawn. Sun May 23 18:21:27 Sidwyn-Kohs-MacBook-Pro.local Erase[8045] <Error>: CGContextFillEllipseInRect: invalid context 2010-05-23 18:21:27.144 Erase[8045:207] New value of counter is 1 2010-05-23 18:21:27.144 Erase[8045:207] I'm being redrawn. Sun May 23 18:21:27 Sidwyn-Kohs-MacBook-Pro.local Erase[8045] <Error>: CGContextFillEllipseInRect: invalid context 2010-05-23 18:21:27.144 Erase[8045:207] New value of counter is 2 2010-05-23 18:21:27.144 Erase[8045:207] I'm being redrawn. Sun May 23 18:21:27 Sidwyn-Kohs-MacBook-Pro.local Erase[8045] <Error>: CGContextFillEllipseInRect: invalid context 2010-05-23 18:21:27.144 Erase[8045:207] New value of counter is 3 2010-05-23 18:21:27.145 Erase[8045:207] I'm being redrawn. Sun May 23 18:21:27 Sidwyn-Kohs-MacBook-Pro.local Erase[8045] <Error>: CGContextFillEllipseInRect: invalid context 2010-05-23 18:21:27.145 Erase[8045:207] New value of counter is 4 2010-05-23 18:21:27.148 Erase[8045:207] I'm being redrawn. Sun May 23 18:21:27 Sidwyn-Kohs-MacBook-Pro.local Erase[8045] <Error>: CGContextFillEllipseInRect: invalid context 2010-05-23 18:21:27.149 Erase[8045:207] New value of counter is 5 2010-05-23 18:21:27.150 Erase[8045:207] I'm being redrawn. Sun May 23 18:21:27 Sidwyn-Kohs-MacBook-Pro.local Erase[8045] <Error>: CGContextFillEllipseInRect: invalid context 2010-05-23 18:21:27.150 Erase[8045:207] New value of counter is 6 My implementation file is: // // ImageView.m // Erase // #import "ImageView.h" #import "EraseViewController.h" @implementation ImageView -(void)setNewRect:(CGRect)anotherRect{ newRect = anotherRect; } - (id)initWithFrame:(CGRect)frame { if (self = [super initWithFrame:frame]) { newRect = CGRectMake(0,0,0,0); ref = UIGraphicsGetCurrentContext(); } return self; } - (void)drawRect:(CGRect)rect { static int counter = 0; CGRect veryNewRect = CGRectMake(30.0, 210.0, 60.0, 60.0); NSLog(@"I'm being redrawn."); if (counter == 0){ CGContextFillEllipseInRect(ref, veryNewRect); } else{ CGContextFillEllipseInRect(ref, rect); } counter++; NSLog(@"New value of counter is %d", counter); } - (void)setNeedsDisplay{ [super setNeedsDisplay]; [self drawRect:newRect]; } - (void)dealloc { [super dealloc]; } @end I've got two questions: 1) Why is it updating counter 6 times? I removed the line [super setNeedsDisplay]; but it becomes 4 times. 2) What is that invalid context error? Thanks guys.

    Read the article

  • Does the combo of PHP5, MySQL, and a Macbook Pro constitute a LAMP stack? If not, what does?

    - by RedEye
    Hello - I mostly code in Visual Studio, I like it, but lately it's making me feel a little claustrophobic. On my MacBook Pro, I've set up PHP5 and MySQL (natively). With the built-in server on the mac, does this constitute a LAMP stack? Is Mac OSX considered a Linux Environment? I have VMWare Fusion 3, should I set up a Linux OS virtually in order to implement a LAMP stack? Should I just use CakePHP or Zend? Any guidance would be greatly appreciated.

    Read the article

  • Looking for an ultra portable laptop for Ubuntu

    - by prule
    Hi, I'm in the market for a new laptop, and portability is important since I really only use it when I'm travelling to and from work - primarily for programming. I've been searching high and low for something like this: less than 2kg hopefully Intel i5 (but negotiable) NO dvd drive - just don't need it 4G ram either 7200rpm disk or SSD (ssd preferable) 13 inch screen not too pricey (MacBook Air is about $1700 AUD) available in Australia The Dell Inspiron 13z and Lenovo Edge 13 look close, but I've not found anything that says I'm not going to have a fight with compatibility. The MacBook Air 13 looks like the PERFECT hardware, but I'm afraid it will just be easier to run MacOS than Ubuntu. I want to stay with Ubuntu, but the MacBook Air is only $1700 so I'm in danger of becoming another apple fanboi if I can't find anything competitive. Going through all the sites looking for stuff has been a huge waste of time System 76 doesn't deliver to Australia http://www.linux-laptop.net/ and http://www.linlap.com/ are hard work and not confidence inspiring http://www.vgcomputing.com.au/nsintro.html is hard work again, searching for every laptop they say has excellent compatibility on the web to find out what spec it is http://zareason.com/shop/Strata-Pro-13.html (at $1345 USD) looks interesting, but I've got no idea how much I'll get stung by customs importing Dell Inspiron 13z with i5, 4G, 320 7200rpm disk, ATI Mobility Radeon HD5430 - 1GB, Dell Wireless 1501 802.11b/g/n @ $1200 AUD seems like the only competitor but is it compatible? (Dell support offer no opinion - as far as they are concerned they only have 2 models that are certified for ubuntu) Am I worrying too much about the compatibility? Should I just go with Dell? Or switch to MacOS? (It would be good to have a searchable database that had the full machine specs, and compatibility - I'm thinking about building something... but I don't have much time right now...) Thanks. UPDATE I went with a MacBook Air. The price/weight/power was just right. Everything else was either too pricy (i5) or too heavy, or underpowered (SU7300 1.3GHz). Its a pity, because I didn't really want to leave Ubuntu. I'll still run it on my media center and spare (heavy) laptop.

    Read the article

  • CoreStore Encryption Error on Mac Lion

    - by Michael
    I am trying to encrypt an external drive using diskutil CoreStorage on Mac Lion 10.7.4. I thought the only requirements were that the drive have GUID partition scheme and Journaled HFS+ file system. I think my drive is configured accordingly but when I type the following command I get an error message back: Michaels-MacBook-Pro:~ Michael$ diskutil cs convert disk2 -passphrase TestPassword Error converting disk to CoreStorage: The given file system is not supported on Core Storage (-69756) Here are the details reported for the drive in question: Michaels-MacBook-Pro:~ Michael$ diskutil list disk2 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Test1 499.8 GB disk2s2 Michaels-MacBook-Pro:~ Michael$ diskutil list disk2 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk2 1: EFI 209.7 MB disk2s1 2: Apple_HFS Test1 499.8 GB disk2s2 Michaels-MacBook-Pro:~ Michael$ diskutil info disk2s2 Device Identifier: disk2s2 Device Node: /dev/disk2s2 Part of Whole: disk2 Device / Media Name: Test1 Volume Name: Test1 Escaped with Unicode: Test1 Mounted: Yes Mount Point: /Volumes/Test1 Escaped with Unicode: /Volumes/Test1 File System Personality: Journaled HFS+ Type (Bundle): hfs Name (User Visible): Mac OS Extended (Journaled) Journal: Journal size 40960 KB at offset 0xe8e000 Owners: Disabled Partition Type: Apple_HFS OS Can Be Installed: Yes Media Type: Generic Protocol: FireWire SMART Status: Not Supported Volume UUID: 1024D0B8-1C45-3057-B040-AE5C3841DABF Total Size: 499.8 GB (499763888128 Bytes) (exactly 976101344 512-Byte-Blocks) Volume Free Space: 499.3 GB (499315826688 Bytes) (exactly 975226224 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: No Ejectable: Yes Whole: No Internal: No I'm a little concerned that the "Partition Type: Apple_HFS" entry is causing the problem, but I don't know how to change that. I only seem to be able to control the "File System Personality: Journaled HFS+" in Disk Utility. Can anyone shed some light on this for me?

    Read the article

  • Netbook (Samsung N220) on Ubuntu 10.04 slows down WiFi for other computers

    - by Joachim
    I encountered a really odd problem with my new netbook. I am running Ubuntu 10.04 on a Samsung N220 Mito. So far everything worked fine. Now I tried the machine for the first time in our work group where we have a wifi (with internet access) for all laptops. The wifi is controlled by a computer running Suse 9.3 which provides a DHCP server and imposes a firewall. At the moment there is only a macbook in the wifi, where no problems with the internet or wifi connection are encountered. Now coming to my actual problem: In addition to the macbook i connect the Samsung N220 to the Wifi. Problem: My download speed is for some reason limited to 70KB/s max. This is neither a limitation of the server/website i browse on, nor a configuration of the netbook: at home i have 500KB/s download speeds. Furthermore, it is not a default limitation for "untrusted" or "new machines" in the wifi, as for instance other new laptops get full speed internet with our wifi. Problem: Once the Samsung N220 is generating traffic in the wifi, the wifi is slowed down dramatically for all other machines: I run a ping to the router from the macbook. The ping times with the N220 ideling are 2-6ms. When I start downloading or browsing in the web with the N220 the ping speed drops to 800ms. Vice versa, when the macbook is generating the traffic the ping of the N220 to the rooter stays constant at around 2-6ms. So clearly, it is some problem originating from my netbook or maybe its treatment in the wifi. Thanks for any help

    Read the article

  • Set up Linux box as WAP for MyBookLive?

    - by AcidFlask
    I inherited an old Linux box as well as a MyBookLive and would like to make the MyBookLive available over my wireless, essentially using the Linux box as a wireless access point. I just wiped the Linux box (home) and installed Ubuntu 12.04 on it. My network setup currently looks like this: (192.168.0.1 netmask 255.255.255.0) ISP --- wireless router --- wlan0 on home (192.168.0.12) | eth0 on home --- MyBookLive MacBook (192.168.0.11) so that the MyBookLive is basically a glorified external hard drive. The router does have an Ethernet port, but it is being used by my roommate's computer so I can't plug the MyBookLive directly into it. Right now I can ping MyBookLive.local and MacBook.local from home, but I am having trouble understanding and figuring out what the correct iptables commands are to make my MacBook see my MyBookLive through the Bonjour network. Also, I'm not sure if I need to set up DNS to forward xxx.local Bonjour/Zeroconf addresses. I tried the following to forward my entire wired network (which has only my MyBookLive) to a single IP address: sysctl net.ipv4.ip_forward=1 iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT iptables -t nat -A PREROUTING -i eth0 -p tcp -j DNAT --to 192.168.0.66 iptables -t nat -A PREROUTING -i eth0 -p udp -j DNAT --to 192.168.0.66 but I can't ping this address from my MacBook. This is probably horribly wrong, but I am a complete noob at setting up this kind of network and could use some expert help with setting this up properly.

    Read the article

  • How to remap "Dashboard" key to show the Desktop on OSX [Snow] Leopard?

    - by Mike
    I use my Desktop far more often than I use my Dashboard. However, my MacBook Pro comes with a dedicated key for Dashboard but it doesn't come with one for Desktop. Using this article, I was able to remap my Dashboard key to show the desktop by changing the values for keys 62 and 63 ("Dashboard") to the same values used by keys 36 and 37 ("Show Desktop"). Specifically, I changed the value for both array index #1s to 111. This worked great for my external (kinesis freestyle) keyboard. But when I went back to my internal macbook keyboard, I discovered that the Dashboard key still mapped to the Dashboard rather than the Desktop. How can I complete this mapping for all of my keyboards? The Kinesis Freestyle, my internal MacBook Pro keyboard, and my external Apple Aluminum Bluetooth keyboard? Update: I'm definitely not looking for a solution that involves using the Function keys instead of the special keys. I wish to keep using my Function keys as function keys as they're indispensable for other applications.

    Read the article

  • Mac OS X: How do I disable SSID Broadcasting with Internet Sharing over Airport?

    - by Jack Chu
    I'm currently using Internet Sharing from my Ethernet over Airport on my Macbook Pro, however I don't want my SSID broadcasted†. There doesn't seem to be an option in Sharing/System Preferences to hide my ssid or prevent broadcasting. Any ideas? † My parent's restaurant has a wifi router, but it's on the roof level where the cable was installed. The signal it gets is weak, but works for the macbook. Their iPhones and 802.11G based computers can't get the wifi connection, maybe 802.11N on the macbook gets better penetration. I figure they could use the airport sharing from the laptop. For a restaurant type setting I don't think having WPA or WPA2 is super important. There's nothing sensitive or insecure on the network, so I figure hiding the SSID would be good enough for their purposes. It's not even active 100% of the time.

    Read the article

  • Apple MagicMouse randomly loses connection

    - by Yuval
    My Magic Mouse periodically randomly loses connection to my macbook, sitting approximately a foot and a half away from it. There are no software updates available for Snow Leopard (10.6.3). I have a bluetooth keyboard (that sits a little closer to the macbook, though I'm not sure this is the issue) that rarely suffers from this problem. Google results mostly suggest to update the software but I have the most updated version of it already. Does anybody have any idea what could be causing the issue? Is this simply a defective mouse? Additional info: I tried replacing the batteries with new ones, making sure they are sitting tightly in their position with no change in behavior (still disconnects periodically). Also, this doesn't seem to be a problem that the mouse is turning itself off to save battery - it does not reconnect when I move or click it. If I wait long enough (a couple of minutes) it reconnects on its own. Otherwise I have to go to the bluetooth menu with my macbook touchpad and choose "yuval's mouse - Connect"

    Read the article

  • Enable H.264 (or x264) in AVIDemux

    - by Thomas
    I am trying to get AVIDemux set up with the X264 codec using this tutorial. The following is what goes down when I get to the ./configure --enable-mp4-output command Thomas-Phillipss-MacBook:x264 tomdabomb2u$ sudo ./configure --enable-mp4-output Password: Unknown option --enable-mp4-output, ignored Found no assembler Minimum version is yasm-0.6.2 If you really want to compile without asm, configure with --disable-asm. So I tried it. Thomas-Phillipss-MacBook:x264 tomdabomb2u$ sudo ./configure --enable-mp4-output --disable-asm Unknown option --enable-mp4-output, ignored Warning: gpac is too old, update to 2007-06-21 UTC or later Platform: X86_64 System: MACOSX asm: no avs: no lavf: no ffms: no gpac: no pthread: yes filters: crop select_every debug: no gprof: no PIC: no shared: no visualize: no bit depth: 8 You can run 'make' or 'make fprofiled' now. I issued make, and then Thomas-Phillipss-MacBook:x264 tomdabomb2u$ ./x264 -v -q 20 -o foreman.mp4 foreman_part_qcif.yuv 176x144. And as expected, the results are: x264 [error]: not compiled with MP4 output support So I'm stuck. Any ideas?

    Read the article

  • Options for gaming remotely on a LAN?

    - by Schwern
    I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

    Read the article

  • Picture syncing on Multiple Macs, iPhones, and iPad together so each device can update them all

    - by cohortq
    Hello! One of the owners of my company has put me to task to sync his pictures between the following devices together. (2) iPhones (2) iMacs (1) Macbook Air (1) iPad Here is what is happening 1) He has a camera that can upload pictures into iPhoto in either (1) of his iMacs, or Macbook Air. 2) He has (2) different iPhones. And here are how they are paired up iPhone - iMac Home iPhone - Macbook Air 3) He has MobileMe syncing Calendar, Contacts, and Notes across all devices 4) Currently we are using MobileMe web galleries to sync all photos, by having ME create each album and upload them to the MobileMe web gallery. Not the problem is. He wants to just take pictures, and once he does that it syncs with all his devices, he'll even dock the iPad. Is there a better way to sync photos between all devices?

    Read the article

  • Get songs off of Windows iPod and onto a Mac

    - by Justing
    I have been using iTunes on a Dell running Windows XP to sync about 60 gigs of songs with my old school iPod. Well, the Dell's hard drive died the other day, and the only place that I have my music is on the iPod (I do have the CDs, but really don't want to have to re-rip 60 gigs of music). So, now I have a shiny new MacBook Pro. Is there a way to get my songs off of my iPod and onto the MacBook? I googled, and found Senuti. But, I'm leery of accidentally formating the iPod and losing my songs, and I can't tell if it is Snow Leopard compatible yet. Has anyone recently gone through this process? Please provide suggestions for copying songs from an iPod formated to work with Windows onto a MacBook Pro running Snow Leopard. Thanks!

    Read the article

  • How to setup an iTunes library to use between two Macs?

    - by stead1984
    As you can tell this is no where near work related. I have an iMac G5 where my itunes is currently hosted, I have also just got a new MacBook Pro. What I want to be able to do is sync my itunes library from my iMac to my MacBook Pro, that way it can be accessible away from my home network, then if I make any changes to the itunes library (like change a track name) it will sync these changes back once I connect back to the home network. My current itunes contains music, videos, podcasts, playlists and iPhone apps, I would also like iTunes to track play counts collectively between the iMac and the MacBook Pro.

    Read the article

  • wireshark not seeing all packets on WiFi

    - by Caffeine Coma
    I'm using Wireshark on OSX, trying to sniff my home network over WiFi. While I can see packets that are sent to/from the host I'm sniffing on, I'm not seeing anything else that goes over the WiFi. It's like I'm not in promiscuous mode or something (the promiscuous mode box is in fact checked). The router is an Apple Airport Extreme, protected by WPA2. I'm attached to the network I'm trying to sniff, so I'm confused about why I can't see other traffic. Edit: I solved this by the following: Plug Macbook directly into the Airport Extreme router Enable "internet sharing" on Macbook, with no password. Bind wireless device (the one I wanted to sniff) to the WiFi hotspot generated by Internet sharing in step 2. Run Wireshark on the Macbook, bound to device en1. Don't forget to disable sharing after you're done. :-)

    Read the article

  • Is there a way to make scp run faster on a Mac OS X?

    - by paul_sns
    I'm trying to a upload a Flex generated SWF file from my Macbook (running Snow Leopard) using the command scp main.swf server.com:/ I had setup key authentication to prevent typing the user/pass every time. This process normally takes up to two minutes using my connection at home (768kbps down/300+ kbps up). The interesting part is that when I use WinSCP in my Windows XP machine, the process only takes 30 seconds max. Both my MacBook and Windows XP machine use the same internet connection. The MacBook is connected to the router via cable (which should be faster right?) while the Windows XP connects through Wifi. Let me know if you need additional information in order to diagnose the problem. Thanks!

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >