Search Results

Search found 1716 results on 69 pages for 'macbook'.

Page 31/69 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • Alternative Methods of Sharing Folders in Windows?

    - by Blaenk
    Hey guys. I'm running Windows 7 and as of now I simply share folders as one usually does in Windows. I then have a MacBook with Leopard (Now Snow Leopard) which I use to connect to my computer to mount the shares by going to Finder, then CMD + K and typing smb://BlaenkPC (The name of my PC) into the address box. This consequently connects to my computer and mounts all of the shares. The problem is that sometimes, if for example I close my MacBook (Which makes it go to sleep) or sometimes even without doing that, the connection somehow drops. Sometimes I close the MacBook and upon re-opening it, everything still works; it's random. It still shows the computer as being connected, but it just shows 'loading' indefinitely. If I hit 'eject' with the intention of re-connecting to the computer, it disappears from the sidebar (The Computer Icon) in Finder, but I cannot re-connect. Activity Monitor (or ps aux, whichever) both show hung instances of umount; one for each share that was mounted. I cannot kill these processes with kill or killall (Yes, even with sudo, and sending signal -9). This has happened to me before, and here is another person who has experienced this. My question boils down to this: Is there an alternative method of sharing folders in Windows, that my Mac can read/understand, that is possibly more reliable and preferably just as fast? I usually use the mounted shares to watch television episodes off my computer, or movies, etc. (In other words, I open them in VLC and they automatically stream from my computer). As far as I can tell, this is a problem with the Samba protocol. I have heard of NFS, but I am not sure if I would have to re-format my drives, or what. I don't mind running a service or daemon to allow the sharing of the folders, I just want it to be done and hopefully in a better way than typical Windows shares through Samba. Usually when I encounter this problem, which is often (read: every day), I have no other option but to restart the MacBook. As I stated in the first question I linked to, shutting down and restarting don't work; I have to manually force the shutdown by holding the power button. I have not modified my installation of Mac OS X in any hackish way, so I doubt it's something with the Operating System, but worst come to worst, I might end up reformatting and doing a clean install to see if that fixes anything, as I am at a complete loss as to what may be causing the problem, and no one else seems to have any idea or care, despite there being quite a few people suffering from this problem, as my research has shown. Any pieces of information that can help are extremely appreciated. You don't have to answer every question on here, but maybe even some insight as to why it might not be possible to kill those hung umount instances for example, or why I may not be able to reconnect using samba (Is it something regarding the way the protocol works?). One thing to note is that I have another computer in the home network that doesn't seem to have this problem. However, it is also running Windows 7 (Note though that I am not using the homegroup feature, but the typical windows sharing feature). My only deduction is that the problem is being caused by the way the Mac (Or Samba implementation, whichever) is handling things. Perhaps it is a limitation.

    Read the article

  • git pull gives error: 401 Authorization Required while accessing https://git.foo.com/bar.git

    - by spuder
    My macbook pro is able to clone/push/pull from the company git server. My cent 6.3 vm gets a 401 error git clone https://git.acme.com/git/torque-setup "error: The requested URL returned error: 401 Authorization Required while accessing https://git.acme.com/git/torque-setup/info/refs As a work around, I've tried creating a folder, with an empty repository, then setting the remote to the company server. I get the same error when trying a git pull The remotes are identical between the machines MacBook Pro (working) git --version git version 1.7.10.2 (Apple Git-33) git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) Cent 6.3 (not working) yum install -y git git --version git version 1.7.1 git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) The git server only allows https. Not git or ssh connections. Why is the macbook pro able to do a git pull, while the cent os machine can't? Solution Update 2013-5-15 As jku mentioned, the culprit is the old version of git installed on the cent box. Unfortunately, 1.7.1 is what you get when you run yum install git The work around is to manually install a newer version of git, or simply add the username to the repo git clone https://[email protected]/git/torque-setup

    Read the article

  • What's slowing for loops/assignment vs. C?

    - by Lee
    I have a collection of PHP scripts that are extremely CPU intensive, juggling millions of calculations across hundreds of simultaneous users. I'm trying to find a way to speed up the internals of PHP variable assignment, and looping sequences vs C. Although PHP is obviously loosely typed, is there any way/extension to specifically assign type (assign, not cast, which seems even more expensive) in a C-style fashion? Here's what I mean. This is some dummy code in C: #include <stdio.h> int main() { unsigned long add=0; for(unsigned long x=0;x<100000000;x++) { add = x*59328409238; } printf("x is %ld\n",add); } Pretty self-explanatory -- it loops 100 million times, multiples each iteration by an arbitrary number of some 59 billion, assigns it to a variable and prints it out. On my Macbook, compiling it and running it produced: lees-macbook-pro:Desktop lee$ time ./test2 x is 5932840864471590762 real 0m0.266s user 0m0.253s sys 0m0.002s Pretty darn fast! A similar script in PHP 5.3 CLI... <?php for($i=0;$i<100000000;$i++){ $a=$i*59328409238; } echo $a."\n"; ?> ... produced: lees-macbook-pro:Desktop lee$ time /Applications/XAMPP/xamppfiles/bin/php test3.php 5.93284086447E+18 real 0m22.837s user 0m22.110s sys 0m0.078s Over 22 seconds vs 0.2! I realize PHP is doing a heck of a lot more behind the scenes than this simple C program - but is there any way to make the PHP internals to behave more 'natively' on primitive types and loops?

    Read the article

  • git stash blunder:

    - by Chirag Patel
    I did a git stash pop and ended up with merge conflicts. I removed the files from the file system and did a git checkout as shown below, but it thinks the files are still unmerged. I then tried replacing the files and doing a git checkout again and same result. I event tried forcing it with -f flag. Any help would be appreciated! chirag-patels-macbook-pro:haloror patelc75$ git status app/views/layouts/_choose_patient.html.erb: needs merge app/views/layouts/_links.html.erb: needs merge # On branch prod-temp # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # modified: db/schema.rb # # Changed but not updated: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # unmerged: app/views/layouts/_choose_patient.html.erb # unmerged: app/views/layouts/_links.html.erb chirag-patels-macbook-pro:haloror patelc75$ git checkout app/views/layouts/_choose_patient.html.erb error: path 'app/views/layouts/_choose_patient.html.erb' is unmerged chirag-patels-macbook-pro:haloror patelc75$ git checkout -f app/views/layouts/_choose_patient.html.erb warning: path 'app/views/layouts/_choose_patient.html.erb' is unmerged

    Read the article

  • Permissions on Mac OSX

    - by Linda
    I think that this is a permissions issue but I am not sure and I am not sure how to repair the problem. I have a new MacBook. I have 2 external drives that were previously used on another MacBook. I have a lot of folders and XCode projects on the external drives. When I try to work on the projects, there is a message similar to this: "This file is not writable. You may not be able to save your changes, but you will be able to Save a Copy somewhere else. Do you want to edit this file anyway?" If I make changes and try to close the project I get this error: "The project and user files project.pbxproj and macbook.pbxuser for project “thirdtry.xcodeproj” are not writeable and cannot be saved. Your changes will be lost if you close the project. You may need to SCM edit these files to gain writability." I have tried just to rename the folder but that permission is not allowed either unless I individually change permissions for every file in an XCode project. As you can imagine, this could be time consuming for tons of files and projects. I can copy the project into internal memory and can run it then after renaming the folder that contains all of the files. This defeats the purpose of having all of the projects on an external drive. Also, in XCode, there is no "Build and Run" there is only "Build and Debug" now. I don't know if this is related or not. Suggestions for how to repair all permissions to all files and folders on my external drives? What about the "Build and Debug" and no "Build and Run" choice? Thanks, Linda

    Read the article

  • trouble setting up anonymous login in ejabberd

    - by sofia
    Hi, In ejabberd.cfg I have the following {host_config, "thisislove-MacBook-2.local", [{auth_method, [internal, anonymous]}, {allow_multiple_connections, false}, {anonymous_protocol, both}]}. but when using speeqe javascript client (speeqe.com) to connect, I see it sends <body rid='1366284187' xmlns='http://jabber.org/protocol/httpbind' to='thisislove-macbook-2.local' xml:lang='en' wait='60' hold='1' window='5' content='text/xml; charset=utf-8' ver='1.6' xmpp:version='1.0' xmlns:xmpp='urn:xmpp:xbosh'/> and the server responds with <body xmlns='http://jabber.org/protocol/httpbind' sid='f89bf034b02fa6b884bb0c55be3f1f69e45e3866' wait='60' requests='2' inactivity='30' maxpause='120' polling='2' ver='1.8' from='thisislove-macbook-2.local' secure='true' authid='353072658' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'><stream:features xmlns:stream='http://etherx.jabber.org/streams'><mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><mechanism>DIGEST-MD5</mechanism><mechanism>PLAIN</mechanism></mechanisms><register xmlns='http://jabber.org/features/iq-register'/></stream:features></body> Notice the mechanisms, DIGEST-MD5 & PLAIN. If I'm not mistaken it should have ANONYMOUS as a mechanism as well. So what happens is that speeqe simply terminates the connection. As such I'm thinking i must be missing something in the anonymous configuration or the muc config. In the mod_muc configg, I have {mod_muc, [ %%{host, "conference.@HOST@"}, {access, muc}, {access_create, muc}, {access_persistent, muc}, {access_admin, muc_admin}, {max_room_name, 190}, {max_room_desc, 190}, {max_users, 500} ]} So what am I missing? Thanks

    Read the article

  • Cannot connect to Github?

    - by user2973438
    so I tried to push some updates onto my repo on github via terminal on Mac OSX 10.8.4 and it doesn't work. I've been getting the same error many times: Lillys-MacBook-Air:Yuewei Lilly$ git push origin master error: Failed connect to github.com:443; Operation timed out while accessing https://github.com/lillybeans/Yuewei.git/info/refs?service=git-receive-pack fatal: HTTP request failed Some background: I've pushed many projects onto github before using terminal (when I was in Canada). I am currently in Shanghai, China, could it be the GFW? But when I was in Beijing, I was able to push projects onto github still. when I do ping github.com: Lillys-MacBook-Air:Yuewei Lilly$ ping github.com PING github.com (192.30.252.131): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 ping: sendto: No route to host Request timeout for icmp_seq 2 ping: sendto: Host is down Request timeout for icmp_seq 3 ping: sendto: Host is down Request timeout for icmp_seq 4 ping: sendto: Host is down Request timeout for icmp_seq 5 ping: sendto: Host is down Request timeout for icmp_seq 6 ping: sendto: Host is down Request timeout for icmp_seq 7 ^C --- github.com ping statistics --- 9 packets transmitted, 0 packets received, 100.0% packet loss Lillys-MacBook-Air:Yuewei Lilly$ I have ShadowSocks (proxy) turned on. Without it I can't access github.com via browser, with it, I can. also when I do "git remote -v" I see both my pull and push remote repos correctly listed. Thank you in advance!

    Read the article

  • Testing radius server from Mac OS X client

    - by Calvin Froedge
    I have a radius server set up on a server running Ubuntu 11.04. I have configured my switch to use the authentication server's IP (192.168.1.2) for RADIUS / 802.1x authentication, and I created a connection to test connecting from my Mac OSX client. Here is my radius configuration for the client: client 192.168.1.0/16 { secret = testing123 } I can successfully authenticate using both 127.0.0.1 (localhost) and 192.168.1.2 (ip of eth1), so I know radius is getting those requests. I set up a connection to test from my macbook, and my requests are timing out. http://screencast.com/t/tMhRLS3H7 Is there a better way to test the radius connection from my macbook? Thanks! UPDATE: I was able to successfully test on Mac OSX client using RadPerf. This is available as a cross-platform command line tool.

    Read the article

  • How do I find out what the Finder is busy with?

    - by Peter S Magnusson
    I'm running Snow Leopard on a MacBook Pro. My Finder has decided to be very busy, and neither restarting Finder nor a reboot cools it down. Spotlight doesn't report activity, Time Machine isn't busy, yet top -ocpu reports Finder is running between 30% and 100%. Update: none of the suggestions have worked. At this point (three months after first asking the question), I'm resigned to wait until the new MacBook Pro comes out and start with a clean install. Very frustrating that there's no way to investigate what the Finder gets stuck on.

    Read the article

  • PPTP VPN on OS X and iOS failed to connect Facebook and Youtube

    - by bGiraffe
    Thnaks for reading. I setup a VPN server on my Buffalo WHR-HP-G300N router at Macau, and use it for access website over China Firewall when i travel in China. On Android and Windows, everything work fine, however on my Macbook Air and iPad, it is not working. I can access blocked site like badoo.com but not facebook and youtube. If i ping it at terminal, it said "ping: cannot resolve facebook.com: Unknown host". After i read this http://cp.hidemynet.com/knowledgebase.php?action=displayarticle&id=26, i find i can restart my router and reboot my Macbook, and connect to VPN before any request to any blocked site so that i can successfully connect to facebook and youtube. However it works sometime but not always. It is really annoying because i need to work on VPN and my Mac, would anyone can help me to solve it? Rather than restarting my router and my Mac every time. Please HELP!!! regards

    Read the article

  • Im getting the "Console Window Host has stopped working" popup in a few places.

    - by m1sk
    Im running Windows 7 on a 17 inch Macbook Pro, late 2011. Last Saturday I opened my laptop(It was either asleep or shutdown before hand) and suddenly had a whole bunch of problem. First off I got a few of pop-errors, my macbook was out of battery. I also had problems with my trackpad(no scrolling or right-click), which I fixed by reinstalling bootcamp. Now a days when ever I run cmd I get the popup Console Window Host has stopped working If I chose the Close the program I get another popup The application was unable to start correctly (0xc0000142) Click OK to close the application. This doesnt happen just with cmd if un/install a program I get similar popups(first one). And in some other case like in visual studio when i was working on class work.

    Read the article

  • Sync files between Mac, PC and Linux automatically

    - by Siriss
    Hello everyone- I have a MacBook Pro, a Windows 7 desktop, and a Fedora 13 netbook. I have been searching far and wide for an automatic solution to sync files (pictures, music, docs, etc...) between the three when they are all on the same LAN. To better explain, when I get home and turn my MacBook on, I want it to sync automatically any file changes to Windows 7 and the netbook. Likewise if I make changes on my Windows 7 box, I want them to be reflected on my Mac. I can use rsync, but it is not automatic as far as I can tell, and I would use Dropbox but I have a lot more that 2 gigs and do not want to pay. I also do not need internet syncing. I just want local LAN. Does anyone have any ideas? Thank you very much in advance.

    Read the article

  • Mac Joining Active Directory Still Prompts For Authentication

    - by David Potter
    My Mac is joined to an Active Directory domain. What I expected to see was the same ease of access to file shares and internal websites that Windows computers joined to the domain experience (i.e., no authentication needed; it just uses Windows Integrated Authentication). Instead I am asked for credentials each time I try to access those shares and protected websites (e.g. SharePoint). Is this normal behavior, or is something wrong with my Mac that it prompts me for my username and password for the domain when I access Windows file shares or intranet sites protected by NTLM/Kerberos? Machines include: MacBook Pros running Mountain Lion MacBook Pros running Lion MacServer running Lion Server

    Read the article

  • PHP Composer Not Working On Mac

    - by Richard Knop
    I have installed a bitnami mac stack mainly because I require at least PHP 5.4.7 version for my project. However, I have run into an issue with composer. This is the error I get when I run: php composer.phar install --dev The error: Richard-Knops-MacBook-Pro:my-project richardknop$ php composer.phar install --dev dyld: Library not loaded: /Applications/MAMP/Library/lib/libiconv.2.dylib Referenced from: /opt/local/bin/php Reason: Incompatible library version: php requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 Trace/BPT trap Richard-Knops-MacBook-Pro:my-project richardknop$ How to solve it?

    Read the article

  • Is it possible to use Logmein to connect to a sleeping (Mac) computer on a wireless network?

    - by jaydles
    I'm using logmein to access my Mac. So I have the local logmein app running on my MacBook Pro, which is on my home wireless network. I access it either from the website (www.logmein.com) or the Logmein Ignition Apps on the iphone or ipad. My problem is that I have to set my MacBook Pro to not sleep at all when plugged in to make this a practical solution, because logmein cant seem to wake it up. I did change the settings in System Preferences to allow "Wake from Lan", but it seems like this won't work with a a Wifi connection. Am I missing anything? Assuming I'm not, is it bad for my computer to basically leave it running and not asleep most of the time?

    Read the article

  • Bluetooth not seeing mouse (Fedora)

    - by Chris
    I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt), blueman-manager, or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

    Read the article

  • Different keyboard layouts at same time for different devices

    - by Joao Carlos
    I have a MacBook Pro running Snow Leopard, and I am using it as a portable but also desktop computer. In order to acheive this, I bought a VGA adapter and I am using it with an external mouse, keyboard, and monitor. The problem is, the external keyboard layout is different from the one on the macbook. It is set to US qwerty (its a logitech G15), and because of that, most keys behave differently than they should. Question is, how can I set up different layouts at same time for different devices? I want US for external keyboard and PT for the default one.

    Read the article

  • Linux Bluetooth [closed]

    - by Chris
    Not sure if this is the proper forum; please forgive me if it's not... I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run either hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt) or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

    Read the article

  • Snow Leopard directories after hard disk crash and restore from Migrate Utility

    - by ennuikiller
    My hard drive on my macbook pro crashed the other day and I got a replacement from Apple with a vanilla snow leopard install. Upon returning home I used the Migration Utility to restore my previous data and configuration. So far, so good! Everything looks and works exactly the same as before the crash. However, I noticed these 2 directories that are taking up quite a bit of space: /Developer (from old Mac) /opt (from old Mac) The question is can I safely remove these? As I said, my macbook pro appears to be restored completely to before the hard drive crash. I can run all my apps and all my files appear to be intact. Therefore it seems the system is not using these directories. Also because of their odd names it doesn't seem that os x is using them for any purpose. Thanks in advance for any help!

    Read the article

  • Diferent keyboard layouts at same time for diferent devices

    - by Joao Carlos
    Hello, I have a MacBook Pro running Snow Leopard, and I am using it was a portable but also desktop computer. In order to acheive this, i bought a VGA adapter and I am using it with an external mouse+keyboard+monitor. The problem is, the external keyboard layout is diferent from the one on the macbook. It is set to US qwerty (its a logitech G15), and because of that, most keys behave diferently from what they are supposed to. Question is, how can I set up diferent layouts at same time for diferent devices? I want US for external keyboard and PT for the default one.

    Read the article

  • Cisco ASA 5505 and slow download speeds for Apple devices

    - by James
    For traffic routing through my ASA 5505, downloads for all Apple devices, including AppleTV iPad gen 1 IMac MacBook Pro are very slow. speedof.me show less than 1 Mbps download (where I should have 20 Mbps +), yet for any Windows-based device, the download speeds are in excess of 20 Mbps. The Windows device, including the iMac and MacBook Pro machines, are connected via ethernet cable. Why are Apple devices experiencing such pain? Is it an ASA setting, or something else? Thanks.

    Read the article

  • Sharing external storage between different operating systems?

    - by CT
    I just received a Lacie 1TB external usb/firewire/esata drive. I have 2 machines. A macbook running osx 10.6 and a desktop running windows 7. I would like to rip my dvd collection to iso and store on my external. Right now I use my macbook's disk utility to rip dvds to iso. However my desktop is what is connected to my hdtv. I mainly just use the desktop for media. I'd like to format the external with a 200 GB partition for time machine backups and have the rest for storage. DVD iso are often above 8GB so that sort of eliminates FAT file systems correct? Do I have any options to be able to have my mac and pc both see the drive?

    Read the article

  • Share files from Windows XP to Mac Snow Leopard

    - by sympleko
    Hi, I have a Windows XP desktop and a MacBook Pro on my home network. I would like to mount my "home directory" (My Documents, or whatever they call it in Windows) onto my MacBook's filesystem. So far I have been able to do this with the Shared Documents folder, using the excellent howto at Maclive. But I'd like to be able to authenticate using my Windows XP username and password, and access my files remotely without exposing them to everyone on the nextwork. Any clues or good links?

    Read the article

  • Different display arrangements for two identical displays

    - by Niels
    I have a MacBook Pro running OSX Lion and two workplaces with identical setups: at both places I have an 27" LED Cinema display. At one workplace my MacBook is on the left side of the external display, and at the other workplace it is on the right. I would like to have two different display arrangements for the two different setups, however, when I change the display arrangements in System Preferences when connected to one display, the arrangement is changed for the other display as well. I used to have a 27" and a 24" Cinema Display, and OSX used to remember the display arrangements for those different displays, but now the displays are identical, so they use the same arrangements setting. Is there any way to tell OSX to handle two identical displays as different ones so I can configure two different arrangements for the two setups?

    Read the article

  • Running rsync on network connect

    I have one mac which is always on and is my main computer. I also have a MacBook and I'm trying to Sync my iphoto library. So I can successfully use rsync to sync files. I'm using a cron to have it run once a day. In reality the macbook isn't always on, so I'm looking for a way to run rsync when ever the two computers are connected on the same wifi network. So I'm guessing the best place is to somehow run rsync when the airport is connected. Whats the best way

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >