Search Results

Search found 4144 results on 166 pages for 'macbook recovery'.

Page 28/166 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Google penalty recovery

  - by sajeev

  I have a site, which is a spiritual site and has nothing to do with commercial or business thing. It was in the first page with the keyword RADHANATH SWAMI. Then suddenly, in sep'13, the site went out from google search. When I checked my WebmasterTools, I saw that there were 40,000 backlinks from a site named http://freeguestbooks.net. But manual action section in WebmasterToolssaid "No Manual webspam actions found" and till date, it shows the same. Then I contacted the webmaster of freeguestbooks.net and requested him to remove the 40K odd backlinks and he very kindly removed it. The WebmasterTools now shows 21,777 backlinks from this site. But since 2 months, the decrease rate of these backlinks is very slow, almost zero. Again, I had contacted the webmaster of freeguestbooks.net and he confirmed that there are no backlinks pointing to his site. I am also told that my anchor text is over-optimised... Total backlinks to my site as per WebmasterTools is only 24,937 out of which 21,777 are the links from freeguestbooks.net as shown in WebmasterTools. Could an expert suggest a way out to get back into google.... Sajeev, India

  Read the article

• External hard drive failing, is backup recovery possible?

  - by backitup

  I have a Seagate Freeagent external hard drive. While I was backing it up on Windows XP my pc crashed and I received the horrifying "Delayed Write Error" when I rebooted citing "$MFT" and a few other files. I tried to unmount it, but to no avail. Now my pc just crashes when I try to access it via Windows. In Ubuntu I am able to view it through disk utility. SMART status is "DISK FAILURE IMMINENT". Fdisk doesn't work, and the SMART tests fail on "Reallocated Sector Count". Is there any way for me to rescue any of my data. I can still access the drive but as soon as I do that it crashes.

  Read the article

• System crashed while upgrading, now unable to recover. Please help

  - by longloop

  Yesterday while upgrading from 11.4 to 11.10, due to power cut my system crashed. Ubuntu is unable to boot. While booting I get two options in grub, one is for recovery mode and the other is for normal ubuntu booting (and others are also thr for mem check and booting to windows). When I try to boot it normally, it pauses booting while displaying ' Checking battery statues' . Though i am not using a laptop, I am on a desktop. And In recovery mode the menu has 4 options - resume boot, fsck , remount and root ( to goto shell prompt) . If I go to shell and type ' apt-get dist upgrade' , it shows - W: not using locking for read only lock file /var/lib/dpkg/lock E:unable to write to /var/cache/apt E:The package lists or status files could not be parsed or opened. Please instruct me to recover from this situation.

  Read the article

• How do I recover my accidentally lost Windows partitions after installing Ubuntu?

  - by Totally newbie

  I have a Toshiba satellite A-200 laptop with a Vista OS on it with 4 NTFS partitions (C:) Vista (D:) Entertainment (E:) Work (F:) Sources and I wanted to start using Ubuntu instead. So I tried it first from the live CD and everything was OK and all the partitions were shown and working and so I decided to install Ubuntu to replace Vista on the (C:) drive. After I did that I can no longer find my folders and files on the (D:), (E:), (F:) partitions and the only file system that is shown is one 198 GB although my HDD is 320 GB. I can't access the lost data on the remaining 120 GB which I hope is still there and not totally lost I am now working from the live CD but I am unable to install testdisk. Can I recover the Vista partitions by the product recovery CD to get my laptop back to the factory settings? Can I recover the NTFS partitions using a recovery program for Windows or will that make the problem worse? I need these data badly as I don't have a backup for them.

  Read the article

• How Google does disaster recovery

  Will you be ready when disaster strikes? It's an uncomfortable question for many IT administrators, because answering it with confidence usually requires boatloads of money, immense complexity, and...

  Read the article

• Simplified Restores with SQL Server 2012 Recovery Advisor

  Occasionally, a DBA may need to restore a database from a multiple backup files that originated from multiple servers. This requirement might arise, for example, in a database-mirroring configuration, where backups may be from either of the servers. Get smart with SQL Backup ProGet faster, smaller backups with integrated verification.Quickly and easily DBCC CHECKDB your backups. Learn more.

  Read the article

• Practically Cloudy: SQL Server Disaster Recovery to Microsoft Azure - Backups

  In the first in a series on the practicalities of using the Microsoft Azure Platform for the SQL Server professional, Buck Woody shows that, whatever your version of SQL Server, there is a way of storing offsite backups in the cloud. Can 41,000 DBAs really be wrong? Join 41,000 other DBAs who are following the new series from the DBA Team: the 5 Worst Days in a DBA’s Life. Part 3, As Corrupt As It Gets, is out now – read it here.

  Read the article

• Windows Backup (2008 R2) recovery and timezone

  - by GrZeCh

  Hello, does difference between timezones on Windows Server 2008 where backup was made and reovery console makes difference? Recovery console (wbadmin from command line too) is not finding any backup on local hard drive connected to server. Thanks EDIT: I'm working on Windows Server 2008 R2 EDIT2: This is not related to timezone. When I connected backup hard drive from Windows 2008 R2 Release Candidate recovery console runned from RTM system version DVD found stored backups from it without problems.

  Read the article

• Recovery partition is 'visible' while hidden

  - by jroeleveld

  For some reason the recovery partition of windows is appearing while it is hidden. With hidden I mean hidden in Disk management and Diskpart. This partition causes the screen to flicker sometimes, as it is continuously switching between being visible and hidden. Sometimes however, it is just visible. In the attached screenshots you can see the configuration. Translation: partitie=partition, In orde = OK, Verborgen = hidden, Lokale schijf = local disk, Herstelpartitie = recovery partition

  Read the article

• How to Get MacBook-Style Finger Gestures on Ubuntu Linux

  - by Zainul Franciscus

  Apple users have been swiping, pinching, and rotating Mac’s user interfaces to their fingers’ content. In today’s article, we’ll show you how to do groovy things like expanding and reducing windows, and changing desktops using finger gestures. To accomplish this, we’ll use a piece of software called TouchEgg, which enhances Ubuntu’s multi touch capability by allowing us to configure actions to the finger gestures that TouchEgg supports. If you’re a Windows user and like the idea of finger-gestures, we also wrote a tutorial on how to enable MacBook-Style finger gestures on Windows Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines SnapBird Supercharges Your Twitter Searches Google’s New Personal Blocklist Extension Kills Search Engine Spam KeyCounter Tracks Your Keystrokes and Mouse Clicks Add Custom LED Ambient Lighting to Your PC or Media Center The Trackor Monitors Amazon Prices; Integrates with Chrome, Firefox, and Safari Four Awesome TRON Legacy Themes for Chrome and Iron

  Read the article

• Can no longer boot with rEFIt and Grub on early 2006 MacBook Pro

  - by Don Quixote

  I don't know what happened to cause this. I have Snow Leopard, Ubuntu 11.04 Natty Narwhal and Windows XP SP3 on my early 2006 MacBook Pro. It is a Core Duo unit, NOT Core 2 Duo, so it is 32-bit only - Model Identifier MacBookPro1,1. I use rEFIt 0.14 for my boot menu. For some reason neither XP nor Ubuntu would boot anymore. I'd just get a black screen with a rapidly flashing underscore in the top-left corner. Having both those OSes failing to boot suggested a problem with the boot loader in my MBR. The rEFIT partition tool verified that my MBR partitions were still synced with my GPT partitions, so I rewrote my MBR partition table with fdisk while booted from Parted Magic: # fdisk /dev/sda (fdisk warns about the disk having a GPT. I press on anyway.) p (Print the existing partition table to make sure it's OK.) w (Write the old partition table back to disk. This also writes a new MBR boot loader.) After this XP would boot but Ubuntu would not, with the same symptom. Now I used update-grub while chrooted into Ubuntu from Parted Magic: # mount /dev/sda3 /mnt # mount --bind /dev /mnt/dev # mount --bind /sys /mnt/sys # mount --bind /proc /mnt/proc # chroot /mnt Chroot issues some warnings about not being able to identify some group IDs. I don't know why that happens, or whether it is a problem. At this point while I am still booted off of Parted Magic's kernel, I am running from Natty's filesystem. # update-grub Update-grub detects each of my operating systems then claims to complete successfully, but still won't boot. I asked this same question over at rEFIt's Sourceforge support forum but there have been no replies yet. I also Googled quite a bit, and see many who have the same black screen problem, but none of their situations seem quite like mine. Thanks for any help you can give me. -- Don Quixote

  Read the article

• "Missing Operating System" after installing Ubuntu 12.04 from a CD on a Macbook Pro

  - by Pierre

  I followed this guide to install Ubuntu 12.04 on my Macbook Pro 8,2 (late 2011): https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation I used a CD. I synced the partition table on rEFIt, and it went fine. I do have an icon to boot on Linux, but when I launch it, after a few seconds I have "Missing Operating System" displayed, and that's all... How can I fix that? The only thing I see is, in the guide, it is mentioned this: On the last dialog of the installer, be sure to click the “Advanced” button and choose to install the boot loader (grub) to your root Ubuntu partition, for example /dev/sda3. This will be the only partition with the EXT4 file system. In Ubuntu 12.04 installation process, there is not such an option, but there is a dropdown menu to select where the grub bootloader should be installed. It was /dev/sda by default, but I selected my root Ubuntu partition (in my case, /dev/sda5). I got a warning message (but actually, it was the same warning message even when I selected /dev/sda), and I continued the installation... Thanks in advance for your help!

  Read the article

• Help reinstalling Ubuntu on macbook pro

  - by pipsqueaker117

  Ok. I recently installed ubuntu on my macbook pro. Unfortunately, while trying to install the nvidia graphics drivers the system wouldn't reboot, the screen grey for hours. I concluded that I had broken ubuntu, and proceeded to boot into osx and remove the ubuntu partitions. After I had done that, after a reboot, I noticed that "boot linux from hd" was still listed in the bootloader (i'm using rEFIT). I dismissed it. Now, I'm trying to reinstall ubuntu, using the same USB that I successfully installed with earlier. Now, however, when the ubuntu installer is on the "copying files" part this error (more or less) pops up. ERRNO 5: We're sorry, the installer crashed. This error frequently is caused by faulty installation media, the hard disk being too hot... and so on and so forth. I'm not sure what's causing the problem, but I have a hunch that whatever's the reason that's causing linux to show up in rEFIT is the root reason. If anyone could respond, that would be great. PS, and unfortunately no, i do not have a time machine backup.

  Read the article

• setup L2TP on Ubuntu 10.10

  - by luca

  I'm following this guide to setup a VPS on my Ubuntu VPS: http://riobard.com/blog/2010-04-30-l2tp-over-ipsec-ubuntu/ My config files are setup as in that guide, openswan version is 2.6.26 I think.. It doesn't work, I can show you my auth.log (on the VPS): Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [RFC 3947] method set to=109 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Feb 18 06:11:07 maverick pluto[6909]: packet from 93.36.127.12:500: received Vendor ID payload [Dead Peer Detection] Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: responding to Main Mode from unknown peer 93.36.127.12 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: STATE_MAIN_R1: sent MR1, expecting MI2 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): peer is NATed Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: STATE_MAIN_R2: sent MR2, expecting MI3 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: Main mode peer ID is ID_IPV4_ADDR: '10.0.1.8' Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[7] 93.36.127.12 #7: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: deleting connection "L2TP-PSK-NAT" instance with peer 93.36.127.12 {isakmp=#0/ipsec=#0} Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: new NAT mapping for #7, was 93.36.127.12:500, now 93.36.127.12:36810 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Feb 18 06:11:07 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: received and ignored informational message Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: the peer proposed: 69.147.233.173/32:17/1701 -> 10.0.1.8/32:17/0 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: responding to Quick Mode proposal {msgid:183463cf} Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: us: 69.147.233.173<69.147.233.173>[+S=C]:17/1701 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: them: 93.36.127.12[10.0.1.8,+S=C]:17/64111===10.0.1.8/32 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Feb 18 06:11:08 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #8: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x0b1cf725 <0x0b719671 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=93.36.127.12:36810 DPD=none} Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: received Delete SA(0x0b1cf725) payload: deleting IPSEC State #8 Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: netlink recvfrom() of response to our XFRM_MSG_DELPOLICY message for policy eroute_connection delete was too long: 100 > 36 Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: netlink recvfrom() of response to our XFRM_MSG_DELPOLICY message for policy [email protected] was too long: 168 > 36 Feb 18 06:11:28 maverick pluto[6909]: | raw_eroute result=0 Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: received and ignored informational message Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12 #7: received Delete SA payload: deleting ISAKMP State #7 Feb 18 06:11:28 maverick pluto[6909]: "L2TP-PSK-NAT"[8] 93.36.127.12: deleting connection "L2TP-PSK-NAT" instance with peer 93.36.127.12 {isakmp=#0/ipsec=#0} Feb 18 06:11:28 maverick pluto[6909]: packet from 93.36.127.12:36810: received and ignored informational message and my system log on OSX (from where I'm connecting): Feb 18 13:11:09 luca-ciorias-MacBook-Pro pppd[68656]: pppd 2.4.2 (Apple version 412.3) started by luca, uid 501 Feb 18 13:11:09 luca-ciorias-MacBook-Pro pppd[68656]: L2TP connecting to server '69.147.233.173' (69.147.233.173)... Feb 18 13:11:09 luca-ciorias-MacBook-Pro pppd[68656]: IPSec connection started Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: Connecting. Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: receive success. (Initiator, Main-Mode message 2). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: receive success. (Initiator, Main-Mode message 4). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Phase1 AUTH: success. (Initiator, Main-Mode Message 6). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: receive success. (Initiator, Main-Mode message 6). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Phase1 Initiator: success. (Initiator, Main-Mode). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Information message). Feb 18 13:11:09 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Information-Notice: transmit success. (ISAKMP-SA). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Feb 18 13:11:10 luca-ciorias-MacBook-Pro racoon[68453]: Connected. Feb 18 13:11:10 luca-ciorias-MacBook-Pro pppd[68656]: IPSec connection established Feb 18 13:11:30 luca-ciorias-MacBook-Pro pppd[68656]: L2TP cannot connect to the server Feb 18 13:11:30 luca-ciorias-MacBook-Pro configd[20]: SCNCController: Disconnecting. (Connection tried to negotiate for, 22 seconds). Feb 18 13:11:30 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Information message). Feb 18 13:11:30 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Feb 18 13:11:30 luca-ciorias-MacBook-Pro racoon[68453]: IKE Packet: transmit success. (Information message). Feb 18 13:11:30 luca-ciorias-MacBook-Pro racoon[68453]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Feb 18 13:11:31 luca-ciorias-MacBook-Pro racoon[68453]: Disconnecting. (Connection was up for, 20.157953 seconds).

  Read the article

• What is the Apple Mikey HID Driver for?

  - by Ivan Vucica

  Cheers, does anyone know what component in Macbook identifies itself as "Apple Mikey HID Driver"? Joystick and Gamepad Tester detected my gamepad, the keyboard (with each key as a separate axis/button/whatever) and this mysterious device (with single axis/button identified as 'Page: 0x6, Usage: 0x22' which doesn't update). This is in white Unibody Macbook '09. Remark: While Googling for the component, I stumbled upon this mailing list post mentioning Apple IR?

  Read the article

• Unable to boot directly to Mac OS X

  - by Prashant

  I was trying to install Windows 7 on my Macbook pro using bootcamp, after creating partition I found out that I missed my DVD at office desk. Later I deleted the partition, but when I restart the macbook it kept telling that "No bootable device found" even after deleting the partition, I'm expecting it to boot directly to Mac OSX. Is there any solution to fix this problem?

  Read the article

• where is backspace key of Mac?

  - by George2

  I am using a MacBook Pro running Mac OS X 10.5. I am new to this development environment, and previously worked on Windows. I am wondering what is the backspace key of Mac (i.e. which is used to delete the character previous to current cursor position in text editor)? Windows keyboard has a dedicated backspace key, but I did not find such a key on my MacBook Pro keyboard. Thanks in advance.

  Read the article

• Can I restore files from a Time Machine backup onto a different computer?

  - by Daryl Spitzer

  I have a Time Machine backup (of personal files only) made from my MacBook Pro provided by my previous employer. Now I have a new job and a new (employer-provided) MacBook Pro. Can I somehow restore files from that backup onto my new machine using the Time Machine UI?

  Read the article

• How to spy on a Mac from a PC

  - by Phenom

  I have a desktop running Windows 7 and a Macbook Pro running Snow Leopard. If someone is using my Macbook Pro, and from my Windows 7 machine I want to see what they see on their screen, is there a way to do that?

  Read the article

• .NET development on a “Retina” MacBook Pro

  - by Jeff

  The rumor that Apple would release a super high resolution version of its 15” laptop has been around for quite awhile, and one I watched closely. After more than three years with a 17” MacBook Pro, and all of the screen real estate it offered, I was ready to replace it with something much lighter. It was a fantastic machine, still doing 6 or 7 hours after 460 charge cycles, but I wanted lighter and faster. With the SSD I put in it, I was able to sell it for $750. The appeal of higher resolution goes way back, when I would plug into a projector and scale up. Consolas, as it turns out, is a nice looking font for code when it’s bigger. While I have mostly indifference for iOS, I have to admit that a higher dot pitch on the iPhone and iPad is pretty to look at. So I ordered the new 15” “Retina” model as soon as the Apple Store went live with it, and got it seven days later. I’ve been primarily using Parallels as my VM of choice from OS X for about five years. They recently put out an update for compatibility with the display, though I’m not entirely sure what that means. I figured there would have to be some messing around to get the VM to look right. The combination that seems to work best is this: Set the display in OS X to “more room,” which is roughly the equivalent of the 1920x1200 that my 17” did. It’s not as stunning as the text at the default 1440x900 equivalent (in OS X), but it’s still quite readable. Parallels still doesn’t entirely know what to do with the high resolution, though what it should do is somehow treat it as native. That flaw aside, I set the Windows 7 scaling to 125%, and it generally looks pretty good. It’s not really taking advantage of the display for sharpness, but hopefully that’s something that Parallels will figure out. Screen tweaking aside, I got the base model with 16 gigs of RAM, so I give the VM 8. I can boot a Windows 7 VM in 9 seconds. Nine seconds! The Windows Experience Index scores are all 7 and above, except for graphics, which are both at 6. Again, that’s in a VM. It’s hard to believe there’s something so fast in a little slim package like that. Hopefully this one gets me at least three years, like the last one.

  Read the article

• Install OS X 10.5 on Intel 1GB Macbook

  - by Moshe

  I'm trying to install Mac OS X 10.5 on a MacBook that previously had 10.4 on it. i am getting an error after selecting the language. What could be causing a box on the screen that says: Mac OS X cannot be installed on this computer. It's an Intel MacBook with 1GB of DDR2 memory. 80GB hard drive. It has been formatted now, so there's no going back. According to the System Profiler on the 10.5 boot CD, the MacBook is version MacBook2,1. Thanks!

  Read the article

• Windows recovery partition with GRUB2

  - by Actorclavilis

  So I recently got a new Toshiba laptop and installed Ubuntu 12.04 on it. Since it is a "Windows 7 Enabled" machine or some other proprietary nonsense like that, a few hardware features are designed only to work with W7. Eventually I found a way to enable these hardware functions by booting into the W7 recovery disc; however, they sporadically stop working. I'm moderately surprised that I was able to get anything to work at all, so I don't especially want to spend more time fixing the problems in a different fashion. Now I don't actually own the recovery disc; it's my father's. Since it's a pain to have to go asking for the disc every time the features stop working, I made an image of the disc and was hoping to make a 'recovery' partition like some computers have. However, unetbootin and GRUB2 both want a kernel and initrd to point to on startup, and something like set root=(hd0,1) loopback lo /w7r.iso set root=(lo) chainloader +1 in the spirit of the makeactive/ chainloader +1 commands that I used to use to dual-boot Linux and Windows simply gives me a file-not-found error. My question, therefore, is: Is it possible to, having written a Windows iso to a partition (such as with dd if=w7r.iso of=/dev/sda4) to a partition, convince GRUB2 to boot from it? Thanks in advance.

  Read the article

• Install ubuntu on MacBook Pro

  - by n179911

  Hi, Can you please tell me what is the preferred way to install Ubuntu on MacBook Pro? I have a MacBook Pro with MacOSX 10.5. I need a Linux environment some times. So what is the best way to achieve that? 1. Make it dual boot? (but I don't know if that is possible with MacBook) 2. Install Virtual Box and then put Ununtu on top of it? (But I am not sure if this configuration will be slow, so I need a Linux environment for coding, so it needs to do compiling and debugging and stuff). Thank you for any tips.

  Read the article

• Shrinking windows and recovery partitions on the samsung new series 9

  - by bobbaluba

  I just bought a samsung NP900X3C, and as I was going to install linux, I noticed the windows partitions and recovery partitions occupied a major portion of the disk. The disk is a 128 GB SSD, and I want to keep the windows partition in order to play some games once in a while, but the windows disk is already 45GB full (with no installed programs) and the recovery partition is 20GB. That leaves under 60 GB for linux, which is not optimal, since that is what I'm going to be using most of the time, and there would be no room for games on the windows partition. There are also two small partitions that I don't know what are doing, one 100mb at the start of the disk that I'm guessing is some kind of boot partition, and one 5GB, that is described as an OS/2 hidden C: drive What I'm wondering is: can i delete the recovery partition? What about the mystical 5gb partition? Here is what fdisk reports: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 128.0 GB, 128035676160 bytes 255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x83953ffc Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 198273023 99033088 7 HPFS/NTFS/exFAT /dev/sda3 198273024 207276031 4501504 84 OS/2 hidden C: drive /dev/sda4 207276032 250068991 21396480 27 Hidden NTFS WinRE

  Read the article

• Windows 7 not booting after installing Ubuntu 12.10

  - by Imran Choudhry

  I have Samsung sf511 with Windows 7 Home preinstalled. I installed Ubuntu 12.10 last night. First I mounted downloaded ubuntu 12.10 iso on a DVD from Windows 7, then I restarted, changed the boot option to DVD and let the Ubuntu DVD run. I selected "Install ubuntu alongside windows 7". In the next step I allocated the diskspace . Ubuntu installed perfectly and it ranned OK. I spent a good time exploring Ubuntu. When I restarted to start my work on Windows again and selected Windows 7 to boot, it showed blue screen after booting up (after logging in). I tried restarting several times but the same blue screen keep showing at the same point of bootup. I also restored windows to an earlier time. Left with no option I booted from Samsung provided windows recovery option. The recovery process ran fine but when it restarted to boot Windows for the first time all I see is a black screen. Nothing happens. It switches between dark command promt screen to a pitch black screen as if it's rebooting after every 10 seconds or so. The laptop can be booted from the DVD Drive or USB drive but is not booting from Harddisk. What should I do in order to use both Windows 7 and Ubuntu?

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >