Search Results

Search found 4144 results on 166 pages for 'macbook recovery'.

Page 31/166 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Trying to get to the command prompt through recovery disk

  - by cody

  I'm trying to reach the command prompt through a vista recovery disk I have, and it boots from the disk and gets to the point where it asks which installation I want to repair and then says the disk is not compatible with my version of windows. I have a dual boot setup with Vista and server 2008 R2. Is there another was to run check disk? I can't boot in safemode or normally, I suspect a driver (atipcie) is the problem

  Read the article

• Windows 7 system drive says it is raw, but System Recovery starts without issues

  - by iulianchira

  I have been running Windows 7 RC1 since it was available a couple of months ago and had no issues whatsoever until today. When I start my laptop, Windows does not boot but instead Windows System Recovery starts. I've used diskpart to list the partitions on the drive and my system partition (c:) has a RAW filesystem. I really need to save all data on the disk as fast as I cant and I would really like not to have to reinstall my system.

  Read the article

• Can't Mount Databases in the Recovery Storage Group in Exchange 2003

  - by Kyle Brandt

  After restoring some mail stores, mounting them in the recovery storage group errors out. So far a repair with eseutil (which the log says was successful) and a server reboot has been tried. A defrag is currently running on the mail store I need to go through this again to post the exact error codes, so I will be updating this question. But I thought someone who does this a lot might have a "More times than not..." answer in the meantime.

  Read the article

• Windows 7 system drive says it is raw, but System Recovery starts without issues

  - by Iulian Chira

  I have been running Windows 7 RC1 since it was available a couple of months ago and had no issues whatsoever until today. When I start my laptop, Windows does not boot but instead Windows System Recovery starts. I've used diskpart to list the partitions on the drive and my system partition (c:) has a RAW filesystem. I really need to save all data on the disk as fast as I cant and I would really like not to have to reinstall my system.

  Read the article

• Ubuntu not booting, recovery mode not loading

  - by TNC

  I have a dual-boot Ubuntu 11.10 and Windows 7 machine setup and last night I had to force shutdown Ubuntu during updates because it wasn't responding. Since then, Ubuntu will not boot up, only flashing a blank lit screen for a split second every couple of seconds. Booting in recovery mode does not help either, as it doesn't load at all. If anyone can help me diagnose what's wrong and figure out what to do, that would be greatly appreciated!

  Read the article

• Internet Explorer Enable Automatic Crash Recovery

  - by Derek Ekins

  In IE8 there is the option: Enable Automatic Crash Recovery I want to disable it using the registry but cannot find the setting for it. Does anyone know what it is?

  Read the article

• data recovery after windows format with ubuntu 10.10

  - by mathew

  Hello, I had a system running Win 7 Home premium and ubuntu 10.04, side by side dual boot.I got an ubuntu 10.10 image disk so I decided to update.But during the installation I think I made a mistake by specifying the whole partition, and after installation of ubuntu 10.10 I saw that my windows and all the other data was gone.there was around 250GB of it.Is there any way I can recover this data??I had a lot of irreplacable photos and collections on the drive.I do have a recovery cd for my windows, but it does not detect any windows os.thanku very much. [email protected]

  Read the article

• Windows 7 Error Recovery upon boot

  - by nijikunai

  My system doesn't boot at all, upon starting it takes me to the Windows Error Recovery screen saying "Windows failed to start, a recent software or hardware change might be the cause" and gives two options Launch System Repair (Recommended) Start Windows normally But neither options work, upon clicking either of them, some progress bars get displayed and the screen just freezes on "Starting Windows". I tried booting from the Windows 7 disk but it too freezes on the "Starting Windows" screen. I even tried booting from ubuntu, slax linux, but they don't work too.

  Read the article

• What is the BRU Server Disaster Recovery Procedure?

  - by Jonskichov

  How do I go about performing a full, bare metal disaster recovery from BRU Server backups? I have backed up the entire C:\ (including Windows, Program Files etc) of a test machine (using Open File Manager) and want to restore this to a new server. What is the procedure I need to go through to restore to a clean server using my backup? How does this work with various services such as DHCP, DNS, Active Directory, SQL Server, Windows Registry etc? Thanks in advance.

  Read the article

• Ati X1600 driver problem on Mac

  - by Mulot

  Hi all, I currently own a 06' Macbook pro 1.1, and since some months I have recurrent problems of displays bug or artifacts. I searched quickly around to see that a lot of other users on Mac (iMac or Macbook pro) also have the same problem due to a problem for the X1600 video card. Apparently it's due to overheating problem, in my case even without warming a lot I have very bad display bugs such as colorful pixel lines, or glitches, and freeze and crash, all of this on Tiger, Leopard and Snow Leopard. I found this interesting article here talking about this problem and trying to gather people so that Apple take the serious GPU problem in consideration. In one of the comments, an user said he removed all bundle named with "radeon" and then he had no more problems under Leopard, and seems ot work fine well too on Snow Leopard. I did the same thing, I removed the bundles of the driver, restart, and no more problems, but not more 3D acceleration, which is not an acceptable solution. For those interested, here is the list of files to be deleted to stop having this problem. /System/Library/Extensions/ATIRadeonX1000.kext /System/Library/Extensions/ATIRadeonX1000GA.plugin /System/Library/Extensions/ATIRadeonX1000GLDriver.bundle /System/Library/Extensions/ATIRadeonX1000VADriver.bundle /System/Library/Extensions/ATIRadeonX2000.kext /System/Library/Extensions/ATIRadeonX2000GA.plugin /System/Library/Extensions/ATIRadeonX2000GLDriver.bundle /System/Library/Extensions/ATIRadeonX2000VADriver.bundle I would like to know if there is a way to fix this using other drivers if that's possible or by creating a group to force Apple to make a replacement program in place. Edit : How to locate those files on your hard drive if you are not under Snow Tiger : sudo find / -iname "*radeon*"

  Read the article

• Copying large files from USB devices to the internal hard drive fails on Mac OS

  - by John M. P. Knox

  I have a second-generation 13" MacBook Air running Mac OS X 10.6.6 with a 2.13 GHz processor, 4 GB of RAM, and a 256 GB SSD hard disk. I often get failures when I attempt to copy a large file or large collection of files from an external USB drive (typically a "Firewire" generation Drobo) to the internal drive. The failure behaves almost exactly as if I had pulled the USB cable from the computer in mid-transfer. I get a warning that I have removed the hard disk improperly. After this event, the drive no longer appears mounted in the finder, and I have to unplug and reinsert the USB cable to mount the drive again. I have also seen a similar problem when using Aperture 3 to import a large number of photos and videos from a USB Compact Flash card reader. The import will fail and I will have to unplug the Card Reader and import the missing items. Oddly, reversing the direction of the copy seems pretty reliable. I've never had a problem copying a large file to a USB device, meaning that I have quite a few large files which are stranded on my Drobo. Model Identifier: MacBookAir3,2 Boot ROM Version: MBA31.0061.B01 I have seen a similar issue reported on Apple's website: http://discussions.apple.com/thread.jspa?threadID=2648590&tstart=0 The only suggested resolutions there seems to be switching to another form of connectivity (e.g. firewire, which does not exist on MacBook Air), or downgrading to Mac OS 10.6.4, or reverting the USB kernel extensions to the 10.6.4 versions: http://discussions.apple.com/message.jspa?messageID=12566073#12582956 I'm not too keen on the idea of downgrading kernel extensions. Does anyone know of a hardware revision without this issue that I can trade up to? Are there any other potential solutions out there?

  Read the article

• Time Machine is getting stuck at "Preparing to Back Up" and my Trash isn't emptying

  - by zarose

  I have encountered two separate problems, but I am putting them in the same question in case they are related. First, my Trash would not empty. It seems to be getting stuck on certain files, because I will reset my Macbook and some of the files will be deleted, and then if I remove a file or two at random, more can be deleted. Some of these files had strange characters in their names. I tried changing the names to single characters, but this did not help. Next, I attempted to backup my Macbook using Time Machine. I plugged in the HDD I've been using for this, but every time I try to start the backup, Time Machine gets stuck at "Preparing to Back Up". I definitely need to know how to fix the Time Machine problem, but I am curious how to solve the trash problem as well, and whether or not these problems are related. EDIT: Console.app logged the following this morning before I left on a trip. I did not bring the HDD with me. 6/5/12 7:41:28.312 AM com.apple.backupd: Starting standard backup 6/5/12 7:41:46.877 AM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 7:41:58.368 AM com.apple.backupd: Backup failed with error: 19 6/5/12 7:59:08.999 AM com.apple.backupd: Starting standard backup 6/5/12 7:59:10.187 AM com.apple.backupd: Backing up to: /Volumes/Seagate 3TB Mac/Backups.backupdb 6/5/12 7:59:13.308 AM com.apple.backupd: Event store UUIDs don't match for volume: Macintosh HD 6/5/12 7:59:13.331 AM com.apple.backupd: Event store UUIDs don't match for volume: Blank 6/5/12 7:59:13.683 AM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|new event db| 6/5/12 8:23:31.807 AM com.apple.backupd: Backup canceled. 6/5/12 8:23:33.373 AM com.apple.backupd: Stopping backup to allow backup destination disk to be unmounted or ejected. 6/5/12 9:51:21.572 PM com.apple.backupd: Starting standard backup 6/5/12 9:51:22.515 PM com.apple.backupd: Error -35 while resolving alias to backup target 6/5/12 9:51:32.741 PM com.apple.backupd: Backup failed with error: 19

  Read the article

• Macbook cannot see specific wireless network after being connected to it for a while

  - by donut

  Okay, so there's a single wireless network that my laptop has troubles with. My Macbook Pro used to be fine with it until it changed to using channel 13 (or 11?). Since then, after being connected to it for a while it disappears from my laptop's view. Other networks are showing up fine and other computers (including several Macs) have no troubles connecting to this network. If I clear my system cache using Onyx and then restart (sometimes a couple times) my laptop can see and connect to it again. But it seems that if I disconnect and try reconnecting I have to clear my cache again. One thing to note is that if I put my computer to sleep while connected to this network it has no problems reconnecting on wake up. I've got a 15" Macbook Pro 2,2 with Leopard 10.5.8.

  Read the article

• 13-inch Macbook Pro Battery Not Charging

  - by hkhalidz

  I have a 13 inch Macbook Pro. From last night on, it says 'Battery Not Charging'. The charger's light is always green and if I remove the charger it turns off(means the battery is completely empty). I tried reseting the PRAM and SMC, but not dice. I also tried using different chargers with out any success. The Macbook Pro is from the new generations and is over a year old. The Power Information section indicates 458 for the Power Cycles. Any help would be greatly appreciated.

  Read the article

• Remap Apple MacBook Eject key in Windows?

  - by user1238528

  I have a MacBook with Windows 7 on it as my daily driver. My MacBook has a nearly useless Eject key, but I wish it was a forward delete key. KeyRemap4Macboook works great in OS X. Is there any software that is equivalent in Windows? I have tried KeyTweaks and HotKeys and neither of them will recognize the Eject key. I looked it up and I think it is key 161. Is there any way to make the key into a more useful forward delete? Could I just go into the registry and do it that way?

  Read the article

• Editing "Time to display recovery options when needed" timeout value using a program

  - by chandra

  Hi all, I want to edit the timeout value of 'Time to display recovery options when needed' without using the UI display option. To navigate, Right click on 'Mycomputer' - Properties - Advanced tab - click on SETTINGS of 'Startup and recovery' = 2nd displayed check box. The value thought to be in c:\boot.ini file, but it has value of other timeout 'Time to display other operating systems'. After some searching, i found that 'c:\windows\bootstat.dat' file holds the timeout value for 'Time to display recovery options when needed'... but, i am not able to decode the .dat file or edit that file.. any suggestions would he helpful for me.. Thanks in advance

  Read the article

• Recording with audio input MacBook Air

  - by Milla Well

  I'm trying to record analogue stereo sound with my MacBookAir. The external mic is plugged to the headphones jack, but it is not being shown in the System Preferences. I did a little bit of research, and there is some rumor, that the headphone jack only supports digital-in for mics. Is there a built-in way to use the analogue stereo sound without purchasing an external converter or a new mic? With my old MacBook 2,1 it was usual for me to do this, but with my new MacBook Air 4,1 it seems to be a tough task.

  Read the article

• Linux/OS X dualboot on a Macbook Pro with RAID

  - by GaretJax

  I'd like to install Gentoo Linux on my Macbook Pro by keeping my current OS X installation. I currently have OS X installed on a RAID 0 on two 160GB Intel SSDs and I'd like to create a new partition for Gentoo alongside OS X without losing the RAID setup but, from what I read on the net, Apple's software RAID is poorly (read "not at all") supported: BootCamp refuses to create a windows partition on a RAID volume rEFIt is not able to boot an OS from a software RAID even Apple's recovery partition for Lion can't be created on a RAID volume Is there a way to dual boot my Macbook while keeping the RAID solution?

  Read the article

• Sharing files from my Macbook to Windows Desktop

  - by Vahe

  What's the most dependable way to share files and folders on a OS X to Windows (I'm using 7). I've followed this guide: http://support.apple.com/kb/HT1812 However, this method does not seem dependable (Works only some of the time). My Macbook does not always show up under the Network on Windows. On certain occasions, turning off windows file sharing completely (in OS X preferences), restarting my Macbook and turning it back on helps. Is there any reason why this is happening? Is there an alternative method?

  Read the article

• Ubuntu 12.04 suddenly will not boot after compiz crash on lockscreen

  - by schonjones

  Yesterday i went to work and closed my laptop. When i got home I couldn't get the lock screen to come back up. ctrl+alt+f2 to get to a terminal and Tried to kill compiz, compiz was not running so I tried to restart it got an error opening the display so i tried to restart lightdm again couldn't open display. so I restarted and now I am stuck on the loading screen. I tried booting in recovery mode and all options hang except root, but i'm stuck with read only. booting from a live cd I can mount the drive but again stuck with read only. I'm completely stuck here. checking my default-display-manager returns "/usr/sbin/elsa" as the only line and can't edit it. I've got an 11.10 live cd and my /home is encrypted so i can't try to back anything up at the moment either. How can i resolve this or at the least back up some of my data? Please help!

  Read the article

• Cannot Boot, How to recover

  - by Kendor

  Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

  Read the article

• Installed ubuntu over windows vista..cant reinstall windows

  - by Marcuz J Hinojoz

  I recently used the "compress hard drive" option within windows. i got the horid "boot mngr is compressed" after the restart. i tried booting my system back to windows vista but it doesnt read the cd that came with my computer. i tried going into system recovery and going back to a previous date but it didnt work. i kept pressing f8 but nothing. i installed ubuntu(the ubuntu cd worked but windows didnt?) i installed ubuntu so i could atleast get in my computer, and i still wasnt able to install windows from there. my hard drive got reformatted to a ext4? and windows cant install because it doesnt read it? im not sure, but its very frustrating. my computer is a gateway gt5668e windows vista home premium with sp1. im a graphic designer and use programs such as photoshop and cinema 4d to do my projects..i have been at a unfortunate halt with my work and i am really bummed out and dont know what to do... any help?

  Read the article

• Move entire OS from NTFS drive to bigger ext4 drive.

  - by pangel

  According to SMART data, the hard drive I curently use is about to fail. I bought a new, bigger drive to copy the system to a safer place. The old drive is 160GB. Ubuntu was installed with Wubi, and the partition is NTFS. There are a few other partitions around (recovery partition, swap...) that I don't care about. The new drive is 320GB. I would like the new system to run on ext4, not on NTFS. I looked at solutions that use dd, or clonezilla, but it seems that moving to a different filesystem prevents me from using them. I considered installing a brand new ubuntu on the new hard drive and then copy /home from the old drive to the new drive, but I heard that there would be file permission problems. I would also have to reinstall all my software. One last thing: the NTFS drive has dead sectors. I don't know how this can influence the copy process, but I mention it just in case. edit: I do not care about the windows partition. I just want Ubuntu to make the transition.

  Read the article

• On a failing hard drive, I am able to view data but unable to copy it - why?

  - by Tom

  I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

  Read the article

• Accidentally mounted a ReiserFS drive as MBR on my windows box - how do I recover?

  - by Ryan

  I had a WD Netcenter with a 160GB drive that kept dropping off the network. I opened up the enclosure and removed the hard drive, connected to a Windows box without knowing the drive used ReiserFS.... When mounting on the Windows box, I chose "MBR" as filesystem. 70GB of data corrupted: 90% of data is word documents, excel spreadsheets, and jpg's - all mission critical. Attempted recovery on Linux box (ubuntu) using TestDisk: I could see the container, but couldn't get anything out – according to TestDisk this was because I chose "none" as filesystem. Attempted recovery using Nucleus Kernel Recovery for windows: 98% of what was recovered is incomplete and/or unusable. I need to know if a way exists to recover or rebuild original ReiserFS MBR, or what tools/techniques might give me the best results in recovering the data. Found a Windows version of TestDisk and I ran it yesterday - here are the results: TestDisk 6.14-WIP, Data Recovery Utility, May 2012 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sda - 160 GB / 149 GiB - CHS 19457 255 63 The harddisk (160 GB / 149 GiB) seems too small! (< 519 GB / 483 GiB) Check the harddisk size: HD jumpers settings, BIOS detection... The following partitions can't be recovered: Partition Start End Size in sectors > ReiserFS 3.6 62 241 8 19458 0 18 311581568 ReiserFS 3.6 62 248 55 19458 8 2 311581568 ReiserFS 3.6 62 254 37 19458 13 47 311581568 ReiserFS 3.6 63 6 28 19458 20 38 311581568 ReiserFS 3.6 63 13 11 19458 27 21 311581568 ReiserFS 3.6 63 21 43 19458 35 53 311581568 ReiserFS 3.6 63 27 41 19458 41 51 311581568 ReiserFS 3.6 63 37 35 19458 51 45 311581568 ReiserFS 3.6 63 54 20 19458 68 30 311581568 ReiserFS 3.6 63 76 26 19458 90 36 311581568

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >