Search Results

Search found 1275 results on 51 pages for 'nat weiss'.

Page 28/51 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• iptables syn flood countermeasure

  - by Penegal

  I'm trying to adjust my iptables firewall to increase the security of my server, and I found something a bit problematic here : I have to set INPUT policy to ACCEPT and, in addition, to have a rule saying iptables -I INPUT -i eth0 -j ACCEPT. Here comes my script (launched manually for tests) : #!/bin/sh IPT=/sbin/iptables echo "Clearing firewall rules" $IPT -F $IPT -Z $IPT -t nat -F $IPT -t nat -Z $IPT -t mangle -F $IPT -t mangle -Z $IPT -X echo "Defining logging policy for dropped packets" $IPT -N LOGDROP $IPT -A LOGDROP -j LOG -m limit --limit 5/min --log-level debug --log-prefix "iptables rejected: " $IPT -A LOGDROP -j DROP echo "Setting firewall policy" $IPT -P INPUT DROP # Deny all incoming connections $IPT -P OUTPUT ACCEPT # Allow all outgoing connections $IPT -P FORWARD DROP # Deny all forwaring echo "Allowing connections from/to lo and incoming connections from eth0" $IPT -I INPUT -i lo -j ACCEPT $IPT -I OUTPUT -o lo -j ACCEPT #$IPT -I INPUT -i eth0 -j ACCEPT echo "Setting SYN flood countermeasures" $IPT -A INPUT -p tcp -i eth0 --syn -m limit --limit 100/second --limit-burst 200 -j LOGDROP echo "Allowing outgoing traffic corresponding to already initiated connections" $IPT -A OUTPUT -p ALL -m state --state ESTABLISHED,RELATED -j ACCEPT echo "Allowing incoming SSH" $IPT -A INPUT -p tcp --dport 22 -m state --state NEW -m recent --set --name SSH -j ACCEPT echo "Setting SSH bruteforce attacks countermeasures (deny more than 10 connections every 10 minutes)" $IPT -A INPUT -p tcp --dport 22 -m recent --update --seconds 600 --hitcount 10 --rttl --name SSH -j LOGDROP echo "Allowing incoming traffic for HTTP, SMTP, NTP, PgSQL and SolR" $IPT -A INPUT -p tcp --dport 25 -i eth0 -j ACCEPT $IPT -A INPUT -p tcp --dport 80 -i eth0 -j ACCEPT $IPT -A INPUT -p udp --dport 123 -i eth0 -j ACCEPT $IPT -A INPUT -p tcp --dport 5433 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p udp --dport 5433 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p tcp --dport 8983 -i eth0.2654 -s 172.16.0.2 -j ACCEPT $IPT -A INPUT -p udp --dport 8983 -i eth0.2654 -s 172.16.0.2 -j ACCEPT echo "Allowing outgoing traffic for ICMP, SSH, whois, SMTP, DNS, HTTP, PgSQL and SolR" $IPT -A OUTPUT -p tcp --dport 22 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 25 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 43 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 53 -o eth0 -j ACCEPT $IPT -A OUTPUT -p udp --dport 53 -o eth0 -j ACCEPT $IPT -A OUTPUT -p tcp --dport 80 -o eth0 -j ACCEPT $IPT -A OUTPUT -p udp --dport 80 -o eth0 -j ACCEPT #$IPT -A OUTPUT -p tcp --dport 5433 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p udp --dport 5433 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p tcp --dport 8983 -o eth0 -d 176.31.236.101 -j ACCEPT #$IPT -A OUTPUT -p udp --dport 8983 -o eth0 -d 176.31.236.101 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 5433 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p udp --sport 5433 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 8983 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p udp --sport 8983 -o eth0.2654 -j ACCEPT $IPT -A OUTPUT -p icmp -j ACCEPT echo "Allowing outgoing FTP backup" $IPT -A OUTPUT -p tcp --dport 20:21 -o eth0 -d 91.121.190.78 -j ACCEPT echo "Dropping and logging everything else" $IPT -A INPUT -s 0/0 -j LOGDROP $IPT -A OUTPUT -j LOGDROP $IPT -A FORWARD -j LOGDROP echo "Firewall loaded." echo "Maintaining new rules for 3 minutes for tests" sleep 180 $IPT -nvL echo "Clearing firewall rules" $IPT -F $IPT -Z $IPT -t nat -F $IPT -t nat -Z $IPT -t mangle -F $IPT -t mangle -Z $IPT -X $IPT -P INPUT ACCEPT $IPT -P OUTPUT ACCEPT $IPT -P FORWARD ACCEPT When I launch this script (I only have a SSH access), the shell displays every message up to Maintaining new rules for 3 minutes for tests, the server is unresponsive during the 3 minutes delay and then resume normal operations. The only solution I found until now was to set $IPT -P INPUT ACCEPT and $IPT -I INPUT -i eth0 -j ACCEPT, but this configuration does not protect me of any attack, which is a great shame for a firewall. I suspect that the error comes from my script and not from iptables, but I don't understand what's wrong with my script. Could some do-gooder explain me my error, please? EDIT: here comes the result of iptables -nvL with the "accept all input" ($IPT -P INPUT ACCEPT and $IPT -I INPUT -i eth0 -j ACCEPT) solution : Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1 52 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 100/sec burst 200 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 state NEW recent: SET name: SSH side: source 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 recent: UPDATE seconds: 600 hit_count: 10 TTL-Match name: SSH side: source 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 tcp dpt:5433 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 udp dpt:5433 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 tcp dpt:8983 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.2 0.0.0.0/0 udp dpt:8983 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 2 728 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:43 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp spt:5433 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp spt:5433 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp spt:8983 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp spt:8983 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 91.121.190.78 tcp dpts:20:21 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LOGDROP (5 references) pkts bytes target prot opt in out source destination 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix `iptables rejected: ' 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 EDIT #2 : I modified my script (policy ACCEPT, defining authorized incoming packets then logging and dropping everything else) to write iptables -nvL results to a file and to allow only 10 ICMP requests per second, logging and dropping everything else. The result proved unexpected : while the server was unavailable to SSH connections, even already established, I ping-flooded it from another server, and the ping rate was restricted to 10 requests per second. During this test, I also tried to open new SSH connections, which remained unanswered until the script flushed rules. Here comes the iptables stats written after these tests : Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 600 35520 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 6 360 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 100/sec burst 200 0 0 LOGDROP tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "w00tw00t.at.ISC.SANS." ALGO name bm TO 65535 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "Host: anoticiapb.com.br" ALGO name bm TO 65535 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 STRING match "Host: www.anoticiapb.com.br" ALGO name bm TO 65535 105 8820 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 10/sec burst 5 830 69720 LOGDROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 state NEW recent: SET name: SSH side: source 0 0 LOGDROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 recent: UPDATE seconds: 600 hit_count: 10 TTL-Match name: SSH side: source 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT udp -- eth0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:123 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 tcp spt:5433 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 udp spt:5433 0 0 ACCEPT tcp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 tcp spt:8983 0 0 ACCEPT udp -- eth0.2654 * 172.16.0.1 0.0.0.0/0 udp spt:8983 16 1684 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 600 35520 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 0 0 LOGDROP tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 owner UID match 33 0 0 LOGDROP udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 owner UID match 33 116 11136 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:53 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 0 0 ACCEPT udp -- * eth0 0.0.0.0/0 0.0.0.0/0 udp dpt:80 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp dpt:5433 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp dpt:5433 0 0 ACCEPT tcp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 tcp dpt:8983 0 0 ACCEPT udp -- * eth0.2654 0.0.0.0/0 0.0.0.0/0 udp dpt:8983 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 0.0.0.0/0 tcp dpt:43 0 0 ACCEPT tcp -- * eth0 0.0.0.0/0 91.121.190.18 tcp dpts:20:21 7 1249 LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain LOGDROP (11 references) pkts bytes target prot opt in out source destination 35 3156 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 1/sec burst 5 LOG flags 0 level 7 prefix `iptables rejected: ' 859 73013 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Here comes the log content added during this test : Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=52 TOS=0x00 PREC=0x00 TTL=51 ID=55666 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=52 TOS=0x00 PREC=0x00 TTL=51 ID=55667 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55668 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:51 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55669 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:52 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55670 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:54 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55671 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:58 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55672 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=6 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=7 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=8 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=9 Mar 28 09:52:59 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=59 Mar 28 09:53:00 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=152 Mar 28 09:53:01 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=246 Mar 28 09:53:02 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=339 Mar 28 09:53:03 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=432 Mar 28 09:53:04 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=524 Mar 28 09:53:05 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=617 Mar 28 09:53:06 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=711 Mar 28 09:53:07 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=804 Mar 28 09:53:08 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=176.31.236.101 DST=176.31.238.3 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=7430 SEQ=897 Mar 28 09:53:16 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61402 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:19 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61403 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:21 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=64 TOS=0x00 PREC=0x00 TTL=51 ID=55674 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK URGP=0 Mar 28 09:53:25 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=61404 DF PROTO=TCP SPT=57637 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=116 TOS=0x00 PREC=0x00 TTL=51 ID=55675 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=116 TOS=0x00 PREC=0x00 TTL=51 ID=55676 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:37 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55677 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:38 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55678 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:39 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55679 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:39 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5055 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:41 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55680 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:42 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5056 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 Mar 28 09:53:45 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:10:8c:cf:28:39:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=180 TOS=0x00 PREC=0x00 TTL=51 ID=55681 DF PROTO=TCP SPT=57504 DPT=22 WINDOW=501 RES=0x00 ACK PSH URGP=0 Mar 28 09:53:48 localhost kernel: iptables rejected: IN=eth0 OUT= MAC=00:25:90:54:d7:88:c0:62:6b:e3:5c:80:08:00 SRC=194.51.74.245 DST=176.31.238.3 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=5057 DF PROTO=TCP SPT=57638 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 If I correctly interpreted these results, they say that ICMP rules were correctly interpreted by iptables, but SSH rules were not. This does not make any sense... Does somebody understand where my error comes from? EDIT #3 : After some more tests, I found out that commenting the SYN flood countermeasure removes the problem. I continue researches in this way but, meanwhile, if somebody sees my anti SYN flood rule error...

  Read the article

• VPN connection sharing for Ubuntu guest

  - by pzico

  I have Ubuntu 10.04 guest on Windows XP host. I need to use a specific VPN software that works only on Windows. How should I configure virtualbox/guest so that the VPN connection would be visible on guest? I already tried NAT and bridged network settings. With both of these options I get only normal internet connection to work, but sites requiring VPN don't work on guest, only on host.

  Read the article

• Create tunnel through an open SSH connection?

  - by criptych

  I have a remote PC (behind NAT and firewall) set up to create a reverse SSH tunnel to my home PC/server (DMZed). Unfortunately, the tunnel hasn't been working lately. Fortunately -- I think -- the remote PC currently has an SFTP session open to the local one. My question is, can I create a tunnel back to the remote PC through that session? Or am I SOL until I can physically get in to restore the reverse tunnel on the remote PC?

  Read the article

• How to access VMWare localhost from my mac?

  - by Abe Miessler

  I have developed a asp.net application on my VMWare virtual machine that I can access (on my VM) by going to http://localhost:1044 How can I access this from safari on my Mac that is running the VM? I tried running ipconfig on my VM and then using the IP address that was given for "Ethernet adapter Local Area Connection", something like this: http://192.168.179.139:1044/ but this throws a not found error. I am currently using NAT. How can I get to localhost on my VM from my mac?

  Read the article

• Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  - by Mark S. Rasmussen

  As we've been having some problems with sporadic packet loss, I've been preparing a replacement router (also an SSG5) for our current Juniper SSG5. I've setup the new SSG5 identically to the old one. We have a /29 IP range with a single IP setup as a MIP map to a server and two others being used for VIP maps. Each VIP/MIP is accompanied by relevant policies. Long story short - we tried connected the new SSG5 and some things were not working as they should. No problem, I just reconnected the old one. However, some things are still broken, even when I reconnected the old one. I fear I may have inadvertently changed some settings while browsing through old settings in my attempt to reconfigure the new SSG5 unit. All inbound traffic seems to work as expected. However, the 192.168.2.202 server can't initiate any outbound connections. It works perfectly on the local network, but any pings or DNS lookups to external IP's fail. The MIP & VIP map to it works perfectly - I can access it through HTTP and RDP without issues. Any tips on what to debug, or where I've messed up my config? I've attached the full config here (with anonymized IPs): set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin auth timeout 10 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "DMZ" tcp-rst set zone "VLAN" block unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 212.242.193.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 212.242.193.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 212.242.193.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 212.242.193.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 212.242.193.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 212.242.193.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 212.242.193.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 212.242.193.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname iplan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname nzlan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 212.242.193.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set pak-poll p1queue pak-threshold 96 set pak-poll p2queue pak-threshold 32 set flow tcp-mss unset flow tcp-syn-check set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set ike respond-bad-spi 1 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit traffic set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "HTTP" permit traffic priority 0 set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(212.242.193.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(212.242.193.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(212.242.193.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• No network connectivity for my CentOS 6 installed in VMWare Fusion in MacOSX Lion

  - by gilzero

  I installed CentOS 6.2 (CentOS-6.2-x86_64-minimal.iso) with VMWare Fusion(Version 4.1.2). (Not with EasyInstall). I am using MacOSX Lion, connect to internet via WIFI. The centos installed does not have network connectivity. *How may I configure it to connect to wifi? * Thanks for any help. Below is screenshot of ifconfig: With the setting Network Adapter, I tried both NAT and Bridged WiFi.

  Read the article

• Squid 2.7.STABLE3-4.1 as a transparent proxy on Ubuntu Server 9.04

  - by LOGIC9

  Can't get this to work at all! I'm trying to get this linux box to act as a transparent proxy and, with the help of DHCP, force everyone on the network to gate into the proxy. I have two ethernet connections, both to the same switch. And I'm trying to get 192.168.1.234 to become the default gateway. The actual WAN connection is to a gateway 192.168.1.1. eth0 is 192.168.1.234 eth1 is 192.168.1.2 Effectively I'm trying to make eth0 a LAN only interface and eth1 a WAN interface. I've oi should set the gateway for eth1 to point to 192.168.1.234 my squid.conf file has the following directives added at the bottom: nly set eth0 to have a gateway address in /etc/network/interfaces I'm not sure whether http_port 3128 transparent acl lan src 192.168.1.0/24 acl lh src 127.0.0.1/255.255.255.0 http_access allow lan http_access allow lh i've added the following routing commands: iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.1.2:3128 iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 I set a computer with TCP settings 192.168.1.234 as the gateway and opened up google.com, but it comes up with a request error. Any ideas why this isn't working? :( Been searching continuously for a solution to no avail. ----------------------------- EDIT ------------------------------- Managed to get it to route properly to the squid, here's the error I get in the browser: ERROR The requested URL could not be retrieved While trying to process the request: GET / HTTP/1.1 Host: www.google.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-gb,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cache-Control: max-age=0 The following error was encountered: * Invalid Request Some aspect of the HTTP Request is invalid. Possible problems: * Missing or unknown request method * Missing URL * Missing HTTP Identifier (HTTP/1.0) * Request is too large * Content-Length missing for POST or PUT requests * Illegal character in hostname; underscores are not allowed Your cache administrator is webmaster. Generated Mon, 26 Oct 2009 03:41:15 GMT by mjolnir.lloydharrington.local (squid/2.7.STABLE3)

  Read the article

• Forwarding udp ports iptables packets "lost"?

  - by Dindihi

  I have a Linux router (Debian 6.x) where i forward some ports to internal services. Some tcp ports (like 80, 22...) are OK. I have one Application listening on port 54277udp. No return is coming from this app, i only get Data on this port. Router: cat /proc/sys/net/ipv4/conf/all/rp_filter = 1 cat /proc/sys/net/ipv4/conf/eth0/forwarding = 1 cat /proc/sys/net/ipv4/conf/ppp0/forwarding = 1 $IPTABLES -t nat -I PREROUTING -p udp -i ppp0 --dport 54277 -j DNAT --to-destination $SRV_IP:54277 $IPTABLES -I FORWARD -p udp -d $SRV_IP --dport 54277 -j ACCEPT Also MASQUERADING internal traffic to ppp0(internet) is active & working. Default Policy INPUT&OUTPUT&FORWARD is DROP What is strange, when i do: tcpdump -p -vvvv -i ppp0 port 54277 I get a lot of traffic: 18:35:43.646133 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.652301 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.653324 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.655795 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.656727 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.659719 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 tcpdump -p -i eth0 port 54277 (on the same machine, the router) i get much less traffic. also on the destination $SRV_IP there are only a few packets coming in, but not all. INTERNAL SERVER: 19:15:30.039663 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.276112 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.726048 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 So some udp ports are "ignored/dropped" ? Any idea what could be wrong? Edit: This is strange: The Forward rule has data packets, but the PREROUTING rule has 0 packets... iptables -nvL -t filter |grep 54277 Chain FORWARD (policy DROP 0 packets, 0 bytes) 168 8401 ACCEPT udp -- * * 0.0.0.0/0 192.168.215.4 state NEW,RELATED,ESTABLISHED udp dpt:54277 iptables -nvL -t nat |grep 54277 Chain PREROUTING (policy ACCEPT 405 packets, 24360 bytes) 0 0 DNAT udp -- ppp0 * 0.0.0.0/0 my.external.ip udp dpt:54277 state NEW,RELATED,ESTABLISHED to:192.168.215.4

  Read the article

• Gateway on a virtual network interface used by LXC guests

  - by linkdd

  I'm currently having some problems with configuring a gateway for a virtual network interface. Here is what I've done : I created a virtual network interface : # brctl addbr lxc0 # brctl setfd lxc0 0 # ifconfig lxc0 192.168.0.1 promisc up # route add -net default gw 192.168.0.1 lxc0 The output of ifconfig gave me what I wanted : lxc0 Link encap:Ethernet HWaddr 22:4f:e4:40:89:bb inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::88cf:d4ff:fe47:3b6b/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:623 errors:0 dropped:0 overruns:0 frame:0 TX packets:7412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:50329 (49.1 KiB) TX bytes:335738 (327.8 KiB) I configured dnsmasq to provide a DNS server (using the default : 192.168.1.1) and a DHCP server. Then, my LXC guest is configured like this : lxc.network.type=veth lxc.network.link=lxc0 lxc.network.flags=up Every thing is working perfectly, my containers have an IP (192.168.0.57 and 192.168.0.98). I can ping the host and the containers from the containers and from the host : (host)# ping -c 3 192.168.0.114 PING 192.168.0.114 (192.168.0.114) 56(84) bytes of data. 64 bytes from 192.168.0.114: icmp_req=1 ttl=64 time=0.044 ms 64 bytes from 192.168.0.114: icmp_req=2 ttl=64 time=0.038 ms 64 bytes from 192.168.0.114: icmp_req=3 ttl=64 time=0.043 ms --- 192.168.0.114 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.038/0.041/0.044/0.007 ms (guest)# ping -c 3 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.048 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.042 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.042 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.042/0.044/0.048/0.003 ms Now, it's time to configure the host as a gateway for the network 192.168.0.0/24 : #!/bin/sh # Clear rules iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -A FORWARD -i lxc0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o lxc0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward The final test failed completely, ping the outside : (guest)# ping -c 3 google.fr PING google.fr (173.194.67.94) 56(84) bytes of data. From 192.168.0.1: icmp_seq=3 Redirect Host(New nexthop: wi-in-f94.1e100.net (173.194.67.94)) From 192.168.0.1 icmp_seq=1 Destination Host Unreachable From 192.168.0.1 icmp_seq=2 Destination Host Unreachable From 192.168.0.1 icmp_seq=3 Destination Host Unreachable --- google.fr ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms Did I missed something ?

  Read the article

• Does VPN connection on virtual machine bypass host VPN?

  - by Daniel Valland Torgrimsen

  I wanted to see if i could channel my traffic trough two vpns, so as an experiment i set up a windows xp virtual machine in virtualbox (using NAT shared network setting), connected the host pc(windows 7) to a vpn, and then the virtual machine to another vpn. this seams to work fine. However, my question is, is the traffic sent trough both vpn servers, or is the virtual machines vpn bypassing the host machines vpn connection? thanks.

  Read the article

• Lync 2010, Kamailio, & Trixbox 2.6.23 (Asterisk 1.4)

  - by slashp

  I'm having an issue trying to connect Lync 2010 phone calls with our trixbox PBX. I've gotten to the point where Kamailio seems to be functioning properly and acting as a bridge between TCP traffic (from Lync) & UDP traffic (to the trixbox, as Asterisk 1.4 does not support SIP over TCP). Our Lync box IP: 10.100.10.41 Our Kamailio box IP: 10.100.10.44 Our trixbox IP: 10.100.10.2 The issue I'm running into is as follows when enabling SIP debugging for the Kamailio box: <--- SIP read from 10.100.10.44:5060 ---> PRACK sip:TNECLTSLY01.contoso.com:5068;transport=Tcp;maddr=10.100.10.41 SIP/2.0 FROM: <sip:9121;[email protected];user=phone>;epid=CF2380792B;tag=4852bab430 TO: <sip:[email protected];user=phone>;epid=CF2380792B;tag=3684a6a24e CSEQ: 24 PRACK CALL-ID: 192daae6-00e1-4140-bddd-0394b35d475b MAX-FORWARDS: 70 Via: SIP/2.0/UDP 10.100.10.44;branch=z9hG4bKcydzigwkX;i=d VIA: SIP/2.0/TCP 10.100.10.41:51677;branch=z9hG4bK159fc989 CONTACT: <sip:TNECLTSLY01.contoso.com:5068;transport=Tcp;maddr=10.100.10.41> CONTENT-LENGTH: 0 USER-AGENT: RTCC/4.0.0.0 MediationServer RAck: 1 23 INVITE <-------------> --- (12 headers 0 lines) --- Sending to 10.100.10.44 : 5060 (NAT) <--- Transmitting (NAT) to 10.100.10.44:5060 ---> SIP/2.0 481 Call leg/transaction does not exist Via: SIP/2.0/UDP 10.100.10.44;branch=z9hG4bKcydzigwkX;i=d;received=10.100.10.44 Via: SIP/2.0/TCP 10.100.10.41:51677;branch=z9hG4bK159fc989 From: <sip:9121;[email protected];user=phone>;epid=CF2380792B;tag=4852bab430 To: <sip:[email protected];user=phone>;epid=CF2380792B;tag=3684a6a24e Call-ID: 192daae6-00e1-4140-bddd-0394b35d475b CSeq: 24 PRACK User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Content-Length: 0 <------------> trixbox1*CLI> <--- SIP read from 10.100.10.44:5060 ---> ACK sip:[email protected];user=phone SIP/2.0 FROM: "John Jones"<sip:9121;[email protected];user=phone>;tag=4852bab430;epid=CF2380792B TO: <sip:[email protected];user=phone>;tag=3684a6a24e;epid=CF2380792B CSEQ: 23 ACK CALL-ID: 192daae6-00e1-4140-bddd-0394b35d475b MAX-FORWARDS: 70 Via: SIP/2.0/UDP 10.100.10.44;branch=z9hG4bKcydzigwkX;i=d VIA: SIP/2.0/TCP 10.100.10.41:51677;branch=z9hG4bK79a21c CONTENT-LENGTH: 0 My SIP trunk on the trixbox looks like this: [from-lync] exten => _+4XXX!,1,Noop(Stripping + from start of number) exten => _+4XXX!,n,Goto(from-internal,${EXTEN:1}) Though I am still having no luck getting the + stripped or the call to go through. Any ideas would be greatly appreciated. Thank you! -slashp

  Read the article

• Cisco VPN Client Behind ASA 5505

  - by fdf33

  I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I can connect to the other ASA if I use a normal cheap Linksys. Here's the version of my ASA: Result of the command: "sh ver" Cisco Adaptive Security Appliance Software Version 8.4(1) Any help would be great. Thanks running-config : Saved : Written by enable_15 at 23:12:32.378 UTC Fri Jul 1 2011 ! ASA Version 8.4(1) ! hostname aaaasa domain-name aaa.local enable password xxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address xxx.xxx.xxx.xxx 255.255.254.0 ! interface Vlan5 no nameif security-level 50 ip address 172.16.0.254 255.255.255.0 ! interface Vlan500 no nameif security-level 100 ip address 10.10.10.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! boot system disk0:/asa841-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 4.2.2.2 domain-name aaa.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network A_93.97.168.1 host 93.97.168.1 object network rdp host 192.168.1.2 object network NETWORK_OBJ_192.168.1.0_24 subnet 192.168.1.0 255.255.255.0 access-list 101 extended permit tcp any host 192.168.1.2 eq 3389 access-list 101 extended permit icmp any any echo-reply access-list 101 extended permit icmp any any source-quench access-list 101 extended permit icmp any any time-exceeded access-list 101 extended permit icmp any any unreachable access-list 102 extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1492 ip local pool VPNPool 192.168.2.200-192.168.2.210 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-641.bin no asdm history enable arp timeout 14400 ! object network rdp nat (inside,outside) static interface service tcp 3389 3389 ! nat (inside,outside) after-auto source dynamic any interface access-group 101 in interface outside access-group 102 out interface outside ! router ospf 1 network 192.168.1.0 255.255.255.0 area 0 log-adj-changes ! route outside 0.0.0.0 0.0.0.0 93.97.168.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca certificate chain ASDM_TrustPoint0 certificate 8877d64d 30820248 308201b1 a0030201 02020488 77d64d30 0d06092a 864886f7 0d010105 05003036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c301e 170d3131 30353231 30383533 34325a17 0d323130 35313830 38353334 325a3036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100ea 1aa95141 480e616c efee6816 a96d6511 313b6776 cd3dd57b cd84b4d2 5e108aee 7c980086 4d92e2eb b6c7bf66 4585af0a ccbf153a db9270be c6f5c67b db9dd8d1 2f78d033 3348b056 df4be0da 70e08953 53adf294 9db6c020 597d250f bf448b43 b90179c8 ff0b15d8 744632d9 31c1945f 0b11e258 b4c1d224 692efff4 7b2f5102 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014493c 19db183a ab1af9e9 b1e44ad4 2a408b3c 89d1301d 0603551d 0e041604 14493c19 db183aab 1af9e9b1 e44ad42a 408b3c89 d1300d06 092a8648 86f70d01 01050500 03818100 1dd1760a fdd15941 4803fb9a cd6f44a7 2e275854 a1c0fbe1 d19f2cc9 182d43ef a547f854 8df96d15 3ea79c62 cf3fcb1c 5820360b c607dbfc 4de8bb16 19f727e9 b928a085 665816d8 138e4a35 ed610950 7910dd4a 0b1a9dd9 0e26f1c8 b78bc0cc cbf19eb2 4c4c3931 45199ea5 249e3266 661e44fd 7a00d376 dcfc6e4e d43f10b8 quit crypto isakmp nat-traversal 30 crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.36 inside dhcpd dns 4.2.2.2 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host number-of-rate 3 threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 82.219.4.31 source outside prefer ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside anyconnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 anyconnect profiles AnyConnectVPN_client_profile disk0:/AnyConnectVPN_client_profile.xml anyconnect profiles SSLAnyConnectVPN_client_profile disk0:/SSLAnyConnectVPN_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_AnyConnectVPN internal group-policy GroupPolicy_AnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client ssl-clientless default-domain value aaa.local webvpn url-list none anyconnect profiles value AnyConnectVPN_client_profile type user group-policy GroupPolicy_SSLAnyConnectVPN internal group-policy GroupPolicy_SSLAnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client default-domain value aaa.local webvpn anyconnect profiles value SSLAnyConnectVPN_client_profile type user username testuser password xxxxxxxxxxxxxxxxx encrypted privilege 0 username testuser attributes vpn-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLPOL type remote-access tunnel-group SSLPOL general-attributes default-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLAnyConnectVPN type remote-access tunnel-group SSLAnyConnectVPN general-attributes address-pool VPNPool default-group-policy GroupPolicy_SSLAnyConnectVPN tunnel-group SSLAnyConnectVPN webvpn-attributes group-alias SSLAnyConnectVPN enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect sip inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect xdmcp ! service-policy global_policy global prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:94a65341aa27d3929d5e92a32ba22120 : end

  Read the article

• Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine [migrated]

  - by javadba

  I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

  Read the article

• Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine

  - by javadba

  I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

  Read the article

• Allowing connections initiated from outside

  - by Mark S. Rasmussen

  I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  Read the article

• Site-to-Site vpn setup amazon ec2 openswan (left) and cisco asa 5540 (right)

  - by user197279

  Need help on this VPN set-up on amazon EC2 using openswan Left side: EC2: setup a peer ip:- according to client using cisco (must be public) encrypted network:- according to client using cisco (must be public) Right side: Cisco ASA 5540: Peer ip: 3.3.3.3 Peer host/rightsubnet: 3.3.3.30/32 (Public NAT'd ip) The goal is to setup a site-to-site vpn connection with the client and I need guidance on the setup required on EC2. Appreciate the help Thanks.

  Read the article

• IPv6 tunnel broker setup

  - by fred basset

  I'm working on a solution to allow remote Linux nodes that are behind firewalls to be accessible for SSH and web server. Can anyone suggest an IPv6 tunnel scheme that would work with NAT firewalls? And what software would be needed on the remote nodes and the central server? Also I do not believe the ISP at either side does native IPv6. A solution where we could have static IPv6 addresses on the remote Linux nodes would be ideal. Thank you, Fred

  Read the article

• Need help making site available externally

  - by White Island

  I'm trying to open a hole in the firewall (ASA 5505, v8.2) to allow external access to a Web application. Via ASDM (6.3?), I've added the server as a Public Server, which creates a static NAT entry [I'm using the public IP that is assigned to 'dynamic NAT--outgoing' for the LAN, after confirming on the Cisco forums that it wouldn't bring everyone's access crashing down] and an incoming rule "any... public_ip... https... allow" but traffic is still not getting through. When I look at the log viewer, it says it's denied by access-group outside_access_in, implicit rule, which is "any any ip deny" I haven't had much experience with Cisco management. I can't see what I'm missing to allow this connection through, and I'm wondering if there's anything else special I have to add. I tried adding a rule (several variations) within that access-group to allow https to the server, but it never made a difference. Maybe I haven't found the right combination? :P I also made sure the Windows firewall is open on port 443, although I'm pretty sure the current problem is Cisco, because of the logs. :) Any ideas? If you need more information, please let me know. Thanks Edit: First of all, I had this backward. (Sorry) Traffic is being blocked by access-group "inside_access_out" which is what confused me in the first place. I guess I confused myself again in the midst of typing the question. Here, I believe, is the pertinent information. Please let me know what you see wrong. access-list acl_in extended permit tcp any host PUBLIC_IP eq https access-list acl_in extended permit icmp CS_WAN_IPs 255.255.255.240 any access-list acl_in remark Allow Vendor connections to LAN access-list acl_in extended permit tcp host Vendor any object-group RemoteDesktop access-list acl_in remark NetworkScanner scan-to-email incoming (from smtp.mail.microsoftonline.com to PCs) access-list acl_in extended permit object-group TCPUDP any object-group Scan-to-email host NetworkScanner object-group Scan-to-email access-list acl_out extended permit icmp any any access-list acl_out extended permit tcp any any access-list acl_out extended permit udp any any access-list SSLVPNSplitTunnel standard permit LAN_Subnet 255.255.255.0 access-list nonat extended permit ip VPN_Subnet 255.255.255.0 LAN_Subnet 255.255.255.0 access-list nonat extended permit ip LAN_Subnet 255.255.255.0 VPN_Subnet 255.255.255.0 access-list inside_access_out remark NetworkScanner Scan-to-email outgoing (from scanner to Internet) access-list inside_access_out extended permit object-group TCPUDP host NetworkScanner object-group Scan-to-email any object-group Scan-to-email access-list inside_access_out extended permit tcp any interface outside eq https static (inside,outside) PUBLIC_IP LOCAL_IP[server object] netmask 255.255.255.255 I wasn't sure if I needed to reverse that "static" entry, since I got my question mixed up... and also with that last access-list entry, I tried interface inside and outside - neither proved successful... and I wasn't sure about whether it should be www, since the site is running on https. I assumed it should only be https.

  Read the article

• Openvpn mat through access server depending on client

  - by Lucas Kauffman

  I have several services which should be accessible through a VPN. Clients who connect through the VPN server should be NATed so that all their traffic passes through the access server. However server residing on the network should not pass their traffic through the access server their VPN facing services should be accessible, but their internet connections should not pas through the access server. So how can I enable NAT on a per client basis using OpenVPN?

  Read the article

• Router with Wake On LAN

  - by Jaroslav Záruba

  I'm looking for a new WiFi router, and one key feature for me is WOL. Seems like many routers won't do this w/ factory firmware. Given my last router (Asus WL-520g) turned into a disco-brick couple hours after flashed DD-WRT I'd prefer if the new one supported WOL (Wake on LAN) out of the box. Other required features would be: DynDNS service support Port forwarding NAT loopback so I can access services running in my own network using dyndns hostname or public IP w/o getting too old (for example DIR-615 with factory firmware lets you wait literally minutes)

  Read the article

• What decent small-office level routers are there

  - by Glenn Slaven

  So let's say I have a network of less than 20 computers including a server that needs to be accessed externally. What router/firewall solutions would you recommend? It can be either hardware or software and would need to be able to do NAT Firewall DMZ Native VPN if possible Some form of network bandwidth monitoring Update: I've accepted the answer I liked but this question probably doesn't have a definitive answer, it would depend on your requirements. Please leave more suggestions with an explanation as to why it works well in your situation.

  Read the article

• Is it generally a bad idea to have other types of virtual appliances installed along side a firewall

  - by MGSoto

  I want to run my Firewall/NAT software (pfsense) and an internal NAS (looking at freenas right now) for my SOHO on one machine. Right now I have them separated on two different machines, but I'd like to consolidate them. Is this generally a bad idea? I see the security concern where if the firewall or host OS is compromised, then your data is essentially screwed. But is it really a concern for me?

  Read the article

• Why the OS in VM always blue screen by chance ?

  - by Foolish

  it always has this error :driver_irql_not_less_or_equal And as i searched over the internet, I found it might because of the bridged network card problem, it would be OK if i changed to NAT.(but I am not sure) And after I reduce the memory allocated to the VM, the error didn't occurs till now Is there any solution?

  Read the article

• kerio load balance

  - by Azzam

  I use kerio winroute 6.5 , for week ago, i got a second adsl link (2 mbps), i tried to configue the load balancing in kerio , but always , kerio directs the traffic to one route without the other , i enabled NAT for firewall and change the rate between 2 links but always kerio takes the system route to one link , is there a solution for that ?

  Read the article

• My facebook blocking ACL has stopped working

  - by Josh

  This probably very simple. This was setup before I arrived, and has been working to block facebook. I recently eliminated some static port forwarding on this 2691 (as in, I don't think anything else has changed), and now facebook is once again accessible. Why is this list not doing what it seems like it should be doing (and was doing)? Would an extended outbound ACL be more appropriate (I think that would have been my thought if I had been tasked with creating this in the first place)? Something different? I've included below what I believe are the relevant parts of the config. interface FastEthernet0/0 ip address my.pub.ip.add my.ip.add.msk ip access-group 1 in ip nat outside ip virtual-reassembly duplex auto speed auto access-list 1 deny 69.171.224.0 0.0.31.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 deny 66.220.144.0 0.0.15.255 access-list 1 deny 69.63.176.0 0.0.15.255 access-list 1 permit any ip nat inside source list 105 interface FastEthernet0/0 overload access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.8.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 105 permit ip 192.168.1.0 0.0.0.255 any EDIT ACL is once again blocking Facebook. Here is the new definition for those interested... access-list 1 deny 66.220.144.0 0.0.7.255 access-list 1 deny 66.220.152.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.0.255 access-list 1 deny 69.63.184.0 0.0.7.255 access-list 1 deny 69.171.224.0 0.0.15.255 access-list 1 deny 69.171.239.0 0.0.0.255 access-list 1 deny 69.171.240.0 0.0.15.255 access-list 1 deny 69.171.255.0 0.0.0.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 173.252.64.0 0.0.31.255 access-list 1 deny 173.252.70.0 0.0.0.255 access-list 1 deny 173.252.96.0 0.0.31.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 permit any

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >