Search Results

Search found 1275 results on 51 pages for 'nat weiss'.

Page 31/51 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Multicasting and VMWare

  - by John Breakwell

  Cracked a Multicasting problem this evening for one of my Canadian Tweeple. They wanted to mulitcast some MSMQ messages to another machine but nothing was arriving in the listening queue. A local queue could be configured to listen to the particular IP address/port in use and messages would arrive, though. Looking at the network traffic, nothing was going onto the wire for the IP address/port pair until they looked at traffic to the VMWare adapter. The machine had a virtual machine to simulate a remote computer and when they changed the setup from NAT to Bridge, multicasting burst into life.

  Read the article

• VirtualBox Port Forward

  - by john.graves(at)oracle.com

  A great new feature in VirtualBox 4.0 is the ability to use NAT networking and forward ports without needing to use ssh -L/-R tricks.  This is great for booting multiple VM domains simultaneously.  It is possible to have several instances which map back to the host machine and different ports on localhost:* automatically forward to the correct VM.  This avoids the hassle of setting up dns entries or static IP addresses.In this example, I'm mapping the host ports 3xxxx to the VM's well known server ports.Note: It is important to setup the Frontend HTTP host/port to avoid incorrect URL rewriting.You may also need to setup an http channel to deal with local traffic which uses the network address 10.0.2.15Happy VMing.

  Read the article

• How to setup a wifi ap hotspot with ipv6 support?

  - by keyman

  How to setup a wifi ap (access point mode) hotspot, with IPv6 support? I've set up a hotspot according to the guide to wifi ap hotspot setup and it works fine. But via the hotspot I failed to visit IPv6 websites. How can I setup a hotspot able to share Ipv6 Internet access? Thanks! Further: Actually I've tried to setup IPv6 forwarding and masquerading. First enabling IPv6 forwarding: echo 1 | sudo tee net/ipv6/conf/default/forwarding Then I tried to execute: sudo ip6tables -t nat -A POSTROUTING -s 2001:db8:0:1::/64 -o eth0 -j MASQUERADE But it gave me an error: ip6tables v1.4.12: Couldn't load target `MASQUERADE':No such file or directory I searched through the Internet but I get confused. So I'm here for help. Thanks!

  Read the article

• VMWare Player pauses often

  - by pascal

  I'm using a 64bit Windows 8 inside vmplayer, with 2 virtual processor cores, virtual hard disk resides on a fast local disc and is not preallocated; host CPU is Intel i7 3770, should be capable of hardware virtualisation but I don't know if VMWare uses it; NAT networking; Sound card connected, USB connected, accelerated 3D graphics (NVidia 313.30 on host) My problem is, that the VM often pauses for a few seconds, and then speeds up for a few seconds to reach real time again. Time in the VM actually moves faster after the pause, for example all animations using timers speed up. When running, the vmware-vmx process shows ~150% CPU usage in top, but 0% when pausing (and D state i.e. waiting for IO). iotop shows normal disk writes from vmware-vmx threads, but during pauses, the flush kernel thread uses 99%. Are there some options to try so that VMWare doesn't wait for IO? I've tried a few things available from the GUI but the issue never went away…

  Read the article

• How to change time servers in 11.10

  - by Reinis I.

  I'm behind NAT, so I can't access pool.ntp.org or Ubuntu's own time servers directly, and I'd like to change the time servers for my system. When googling, I find references to missing manpages like ntpd.conf(5) and ntpd(8), to a missing GUI for setting the time servers, and to a cron script (/etc/cron.daily/ntpdate) that doesn't seem to exist on my system. I've also found a reference to there being changes to ntpd.conf, so I'm hesitant to just create that file in /etc. How is one supposed to change the time servers in 11.10?

  Read the article

• How to define default gateway with multiple DHCP interfaces?

  - by DrumEater

  How does ifconfig determine which network interface to use as the default when DHCP assigns a default route for each NIC? It seems like it's in a race-condition and I need to have a more reliable solution. Is there a setting in /etc/network/interfaces that could define the preferred gateway? I read about "metric" but that did not seem to function. 10.04 LTS Server with two NICs on a managed network. IP addresses are assigned via DHCP which I do not manage. eth0 is assigned a private NAT address; eth1 is assigned a public IP.

  Read the article

• Which network protocol to use for lightweight notification of remote apps?

  - by Chris Thornton

  I have this situation.... Client-initiated SOAP 1.1 communication between one server and let's say, tens of thousands of clients. Clients are external, coming in through our firewall, authenticated by certificate, https, etc.. They can be anywhere, and usually have their own firewalls, NAT routers, etc... They're truely external, not just remote corporate offices. They could be in a corporate/campus network, DSL/Cable, even Dialup. Client uses Delphi (2005 + SOAP fixes from 2007), and the server is C#, but from an architecture/design standpoint, that shouldn't matter. Currently, clients push new data to the server and pull new data from the server on 15-minute polling loop. The server currently does not push data - the client hits the "messagecount" method, to see if there is new data to pull. If 0, it sleeps for another 15 min and checks again. We're trying to get that down to 7 seconds. If this were an internal app, with one or just a few dozen clients, we'd write a cilent "listener" soap service, and would push data to it. But since they're external, sit behind their own firewalls, and sometimes private networks behind NAT routers, this is not practical. So we're left with polling on a much quicker loop. 10K clients, each checking their messagecount every 10 seconds, is going to be 1000/sec messages that will mostly just waste bandwidth, server, firewall, and authenticator resources. So I'm trying to design something better than what would amount to a self-inflicted DoS attack. I don't think it's practical to have the server send soap messages to the client (push) as this would require too much configuration at the client end. But I think there are alternatives that I don't know about. Such as: 1) Is there a way for the client to make a request for GetMessageCount() via Soap 1.1, and get the response, and then perhaps, "stay on the line" for perhaps 5-10 minutes to get additional responses in case new data arrives? i.e the server says "0", then a minute later in response to some SQL trigger (the server is C# on Sql Server, btw), knows that this client is still "on the line" and sends the updated message count of "5"? 2) Is there some other protocol that we could use to "ping" the client, using information gathered from their last GetMessageCount() request? 3) I don't even know. I guess I'm looking for some magic protocol where the client can send a GetMessageCount() request, which would include info for "oh by the way, in case the answer changes in the next hour, ping me at this address...". Also, I'm assuming that any of these "keep the line open" schemes would seriously impact the server sizing, as it would need to keep many thousands of connections open, simultaneously. That would likely impact the firewalls too, I think. Is there anything out there like that? Or am I pretty much stuck with polling? TIA, Chris

  Read the article

• stun and p2p communication

  - by sr-dusad

  hi I m new in network programming.I want to traverse NAT using Stun .I use the stun client application defined in code project Stun Client .It returned me a mapped ip and port.But i don't know how to use this ip and port for p2p communication in c#.net. Pls Help me . Any help will be appriciated

  Read the article

• Drupal 7: Create a taxonomy term for each node and use the node title as the term name

  - by Spre3

  Is there anyway of doing this by using rules or by some custom code? I did try using rules but I can't find a way of adding a new term and set the name as the node title because the [node:title] token is not avilable. I know this is possible using the NAT module but the way this module changes the taxonomy terms hierarchy if you add a term reference field that uses the same taxonomy vocabulary which ruins the whole purpose of what I am trying to do.

  Read the article

• Which network protocol to use for lightweight notification of remote apps (Delphi 2005)

  - by Chris Thornton

  I have this situation.... Client-initiated SOAP 1.1 communication between one server and let's say, tens of thousands of clients. Clients are external, coming in through our firewall, authenticated by certificate, https, etc.. They can be anywhere, and usually have their own firewalls, NAT routers, etc... They're truely external, not just remote corporate offices. They could be in a corporate/campus network, DSL/Cable, even Dialup. Currently, clients push new data to the server and pull new data from the server on 15-minute polling loop. The server currently does not push data - the client hits the "messagecount" method, to see if there is new data to pull. If 0, it sleeps for another 15 min and checks again. We're trying to get that down to 7 seconds. If this were an internal app, with one or just a few dozen clients, we'd write a cilent "listener" soap service, and would push data to it. But since they're external, sit behind their own firewalls, and sometimes private networks behind NAT routers, this is not practical. So we're left with polling on a much quicker loop. 10K clients, each checking their messagecount every 10 seconds, is going to be 1000/sec messages that will mostly just waste bandwidth, server, firewall, and authenticator resources. So I'm trying to design something better than what would amount to a self-inflicted DoS attack. I don't think it's practical to have the server send soap messages to the client (push) as this would require too much configuration at the client end. But I think there are alternatives that I don't know about. Such as: 1) Is there a way for the client to make a request for GetMessageCount() via Soap 1.1, and get the response, and then perhaps, "stay on the line" for perhaps 5-10 minutes to get additional responses in case new data arrives? i.e the server says "0", then a minute later in response to some SQL trigger (the server is C# on Sql Server, btw), knows that this client is still "on the line" and sends the updated message count of "5"? 2) Is there some other protocol that we could use to "ping" the client, using information gathered from their last GetMessageCount() request? 3) I don't even know. I guess I'm looking for some magic protocol where the client can send a GetMessageCount() request, which would include info for "oh by the way, in case the answer changes in the next hour, ping me at this address...". Also, I'm assuming that any of these "keep the line open" schemes would seriously impact the server sizing, as it would need to keep many thousands of connections open, simultaneously. That would likely impact the firewalls too, I think. Is there anything out there like that? Or am I pretty much stuck with polling? TIA, Chris

  Read the article

• Remote Desktop in Linux like Team Viewer

  - by crissangel

  For Remote Desktop Sessions in Linux, I want to know if there something available equivalent for what Team Viewer does for windows? The main advantage I find of Team viewer is that it can bypass firewalls, needs no NAT configurations or port forwarding rules to be setup in the router.

  Read the article

• How to setup network for Android Honeycomb in VirtualBox?

  - by IHawk

  I have been trying to setup Android Honeycomb (3.2) with VirtualBox according to this tutorial: http://androidspin.com/2011/01/24/howto-install-android-x86-2-2-in-virtualbox/ but using this iso instead: http://code.google.com/p/android-x86/downloads/detail?name=android-x86-3.2-RC1-tegav2.iso&can=2&q When I type netcfg if gives me: 127.0.0.1/8, so apparently it is not connecting in the network. I tried setting the network to NAT and Bridge, but no results.. Is there anything I am missing?

  Read the article

• MySQL on two ports using IPTables - self-access

  - by b0rman

  I trying to make MySQL available by 2 ports: 3306 and 3339 I added rule to iptables: iptables -t nat -A PREROUTING -i bond0 -p tcp --dport 3339 -j REDIRECT --to-port 3306 and everythin is great for remote connections. But if I'm trying to connect it locally, I'm getting an error: mysql -u username -ppassword --port=3339 -h Host.Name ERROR 2003 (HY000): Can't connect to MySQL server on 'Host.Name' (111) Any ideas how can I edit iptables to get local access via 3339 port?

  Read the article

• Redirect-gateway def1

  - by John

  I have setup OpenVPN on my server, and I am able to connect to it just fine, and browse the web, etc, from the client box. If I set the following option in the client config, I can no longer browse the web via domain name: redirect-gateway def1 On the server, I have run the following command: iptables -t nat -s 10.8.0.0/24 -A POSTROUTING -j SNAT --to myserver'sIP but that hasn't changed anything. Can anyone help suggest something?

  Read the article

• How to bridge Debian guest VM to VPN via Cisco AnyConnect Client running on Windows Vista host

  - by bgoodr

  I am running Cisco Anyconnect VPN Client version 2.5.3054 on a laptop running Windows Vista Home Premium (version 6.0.6002) Service Pack 2. I am running the VMware Player version 4.0.2 build-591240. The host operating system running under VMware Player is Debian 6.0.2.1 i386. The laptop is connected to a wireless connection, and I can browse the web from Windows Vista using Firefox just fine. I am able to boot into the Debian VM and open up a browser and access websites on the WAN from within the VM just fine. I can ping real Linux hosts on my LAN via: ping <lan_system>.local where <lan_system> is the hostname returned from uname -a on that system on my LAN. From a DOS CMD shell, I am able to ping hosts that exist on the remote network served by the Cisco AnyConnect Client's VPN network (and without the .local suffix applied as above): ping <remote_system> However, from within the Debian VM, I expect to be able to also ping those same remote hosts (<remote_system>) that are tunnelled over the VPN set up by Cisco AnyConnect Client. Let's say that I can ping a <remote_system> called flubber from a DOS CMD prompt just fine. When I execute Linux ping command from inside the Debian VM via: ping flubber It returns immediately with this output: ping: unknown host flubber For reference since I suspect it will be useful, here is the output of the route print command from the DOS CMD prompt: route print =========================================================================== Interface List 30 ...00 05 9a 3c 7a 00 ...... Cisco AnyConnect VPN Virtual Miniport Adapter for Windows 11 ...00 1b 9e c4 de e5 ...... Atheros AR5007EG Wireless Network Adapter 26 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 28 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 1 ........................... Software Loopback Interface 1 12 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 13 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 32 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4 27 ...00 00 00 00 00 00 00 e0 isatap.{E5292CF6-4FBB-4320-806D-A6B366769255} 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 20 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #8 22 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #10 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #11 25 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #12 29 ...00 00 00 00 00 00 00 e0 isatap.{C3852986-5053-4E2E-BE60-52EA2FCF5899} 41 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #14 =========================================================================== At the top window border of the VM, clicking on Virtual Machine, then clicking on Virtual Machine Settings, then clicking on Network Adapter, I have these two options checked: [X] Bridged: Connected directly to the physical Network [X] Replicate physical network connection state [ ] NAT: used to share the hosts's IP address [ ] Host-only: A private network shared with the host [ ] LAN segment: [ ] <LAN Segments...> <Advanced> I've toyed with the other options such as NAT and Host-only but that had no effect. Is there some way to allow the VM to access those <remote_system>'s?

  Read the article

• Sometimes this script fails to update the iptables

  - by AlJo

  It does not happen often, but sometimes after running the below script, checking the iptables with service iptables status shows that they weren't updated and the script doesn't output any error. The iptables is structured as look-up tree (long repeated sections snipped): #!/bin/sh iptables -t nat -F iptables -t nat -X iptables -F iptables -X iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -s 93.225.0.0/16 -j ACCEPT iptables -A INPUT -s 15.102.0.0/16 -j ACCEPT iptables -A INPUT -s 47.122.0.0/16 -j ACCEPT iptables -N MY_CHAIN_L1-0 iptables -N MY_CHAIN_L1-1 iptables -N MY_CHAIN_L1-2 iptables -N MY_CHAIN_L1-3 iptables -N MY_CHAIN_L1-4 iptables -N MY_CHAIN_L1-5 iptables -N MY_CHAIN_L1-6 iptables -N MY_CHAIN_L1-7 iptables -N MY_CHAIN_L1-8 iptables -N MY_CHAIN_L1-9 iptables -N MY_CHAIN_L1-10 iptables -N MY_CHAIN_L1-11 iptables -N MY_CHAIN_L1-12 iptables -N MY_CHAIN_L1-13 iptables -N MY_CHAIN_L1-14 iptables -N MY_CHAIN_L1-15 iptables -N MY_CHAIN_L1-16 iptables -N MY_CHAIN_L1-17 iptables -N MY_CHAIN_L1-18 iptables -N MY_CHAIN_L1-19 iptables -N MY_CHAIN_L1-20 iptables -N MY_CHAIN_L1-21 iptables -N MY_CHAIN_L1-22 iptables -N MY_CHAIN_L1-23 iptables -N MY_CHAIN_L1-24 iptables -N MY_CHAIN_L1-25 iptables -N MY_CHAIN_L1-26 iptables -N MY_CHAIN_L1-27 iptables -N MY_CHAIN_L1-28 iptables -N MY_CHAIN_L1-29 iptables -N MY_CHAIN_L1-30 iptables -N MY_CHAIN_L1-31 iptables -N MY_CHAIN_L1-32 iptables -N MY_CHAIN_L1-33 iptables -N MY_CHAIN_L1-34 iptables -N MY_CHAIN_L1-35 iptables -N MY_CHAIN_L1-36 iptables -N MY_CHAIN_L1-37 iptables -A INPUT -m iprange --src-range 1.54.96.0-5.133.179.255 -j MY_CHAIN_L1-0 iptables -A INPUT -m iprange --src-range 5.133.180.0-24.113.159.255 -j MY_CHAIN_L1-1 [snip] iptables -A INPUT -m iprange --src-range 195.13.45.0-198.11.255.255 -j MY_CHAIN_L1-29 iptables -A INPUT -m iprange --src-range 198.12.64.0-199.19.215.255 -j MY_CHAIN_L1-30 iptables -A INPUT -m iprange --src-range 199.21.96.0-200.31.3.255 -j MY_CHAIN_L1-31 iptables -A INPUT -m iprange --src-range 200.31.11.0-202.171.255.255 -j MY_CHAIN_L1-32 iptables -A INPUT -m iprange --src-range 203.130.134.192-206.212.255.255 -j MY_CHAIN_L1-33 iptables -A INPUT -m iprange --src-range 206.214.64.0-211.155.95.255 -j MY_CHAIN_L1-34 iptables -A INPUT -m iprange --src-range 212.19.128.0-216.176.191.255 -j MY_CHAIN_L1-35 iptables -A INPUT -m iprange --src-range 216.189.0.0-218.23.255.255 -j MY_CHAIN_L1-36 iptables -A INPUT -m iprange --src-range 218.30.96.0-223.255.231.255 -j MY_CHAIN_L1-37 iptables -A MY_CHAIN_L1-0 -s 1.54.96.0/20 -j DROP iptables -A MY_CHAIN_L1-0 -s 1.208.0.0/12 -j DROP iptables -A MY_CHAIN_L1-0 -s 1.224.0.0/11 -j DROP [snip] iptables -A MY_CHAIN_L1-0 -s 5.133.178.0/23 -j DROP iptables -A MY_CHAIN_L1-0 -j ACCEPT iptables -A MY_CHAIN_L1-1 -s 5.133.180.0/22 -j DROP iptables -A MY_CHAIN_L1-1 -s 5.135.0.0/16 -j DROP iptables -A MY_CHAIN_L1-1 -s 5.153.232.0/21 -j DROP [snip] iptables -A MY_CHAIN_L1-1 -s 24.113.128.0/19 -j DROP iptables -A MY_CHAIN_L1-1 -j ACCEPT . . . iptables -A MY_CHAIN_L1-29 -s 195.13.45.0/24 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.20.224.0/19 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.31.216.0/26 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.58.245.0/24 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.60.164.0/23 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.60.240.0/22 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.62.10.0/23 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.110.30.0/23 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.154.0.0/16 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.190.13.0/24 -j DROP iptables -A MY_CHAIN_L1-29 -s 195.211.152.0/22 -j DROP iptables -A MY_CHAIN_L1-1 -j ACCEPT [snip more of same to end of script] Can anyone see why this script would silently fail to update the iptables sometimes? Maybe it's not the script? Thanks

  Read the article

• routing specific IP to ppp0 tunnel

  - by gompertz

  Hi All, I feel I've struggled with this long enough and need some help. I have a pptp tunnel and am trying to route destination traffic from 208.85.40.20 to the pptp tunnel (ppp0). (Keen observers may recognize the ip as being that of pandora.com). I am doing all this configuration on a router... and I know it's not working successfully as traceroute yields nothing but astericks. I've pasted relevant outputs below: (with some "security" editing to the addresses) root@OpenWrt:~# ifconfig br0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28185 errors:0 dropped:0 overruns:0 frame:0 TX packets:24936 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4894242 (4.6 MiB) TX bytes:5941902 (5.6 MiB) eth0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:51829 errors:0 dropped:0 overruns:0 frame:0 TX packets:56824 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11490288 (10.9 MiB) TX bytes:11857913 (11.3 MiB) Interrupt:4 eth2 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:15426 TX packets:9529 errors:21 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:423 (423.0 B) TX bytes:596036 (582.0 KiB) Interrupt:2 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:30 errors:0 dropped:0 overruns:0 frame:0 TX packets:30 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2300 (2.2 KiB) TX bytes:2300 (2.2 KiB) ppp0 Link encap:Point-Point Protocol inet addr:68.68.39.250 P-t-P:172.16.20.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:165 errors:2 dropped:0 overruns:0 frame:0 TX packets:68 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:7006 (6.8 KiB) TX bytes:3462 (3.3 KiB) vlan0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:28182 errors:0 dropped:0 overruns:0 frame:0 TX packets:33813 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5006544 (4.7 MiB) TX bytes:6609774 (6.3 MiB) vlan1 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:173.183.111.3 Bcast:173.183.111.255 Mask:255.255.224.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:23653 errors:0 dropped:0 overruns:0 frame:0 TX packets:23012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5522012 (5.2 MiB) TX bytes:4982944 (4.7 MiB) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@OpenWrt:~# cat /etc/ppp/ip-up iptables -A FORWARD -t filter -i br0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -t filter -i ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -s 192.168.1.1/24 -d 0/0 -j MASQUERADE iptables -A forwarding_rule -o ppp0 -j ACCEPT iptables -A forwarding_rule -i ppp0 -j ACCEPT iptables -t nat -A postrouting_rule -o ppp0 -j MASQUERADE root@OpenWrt:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.16.20.1 * 255.255.255.255 UH 0 0 0 ppp0 208.85.40.20 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 173.183.192.0 * 255.255.224.0 U 0 0 0 vlan1 default d173-183-192-1. 0.0.0.0 UG 0 0 0 vlan1 default 192.168.1.1 0.0.0.0 UG 0 0 0 br0 Any advice is greatly appreciated, I'm not too great with network but am pretty astute at learning ;-)

  Read the article

• Weird Network Behavior of Home Router

  - by Stilgar

  First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

  Read the article

• http request via iptables --to-destination ip redirect results in no response

  - by Wouter Vegter

  I have two Ubuntu servers with each having their own ip addresses. Let's call them server1 and server2, having respectively ip 1.1.1.1 and 2.2.2.2 I have a nginx running on server2. The sole purpose I want server1 to have is to redirect all incoming http (so port 80) requests to server2 without clients noticing that their request is being redirected. I tried the following command on server1: iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination 2.2.2.2 But when I enter 1.1.1.1 in my browser I get no respond: the page keeps trying to load without giving any message or error message (I get a time-out after 2-3 mins). But when I do remove the above iptables rule I immediately do get a "page not found error" when I enter 1.1.1.1 in my browser; so something is working but not as it should: when I enter 1.1.1.1 I want the html page to load that is hosted on 2.2.2.2 Because when i enter 2.2.2.2 in my browser I do see the webpage loaded. Could anyone please help me with this? I am searching quite some time (on severfault & Google) on this now so that's why I ask. Many thanks for reading my question! Update: Thank you all for you information. Unfortunately I still get no response I have the following iptables configuration: root@ip-10-48-238-216:/home/ubuntu# sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination root@ip-10-48-238-216:/home/ubuntu# sudo iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere anywhere tcp dpt:www to:2.2.2.2 Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination When i run tcpdump and do request via chrome to 1.1.1.1 i get the following root@ip-10-48-238-216:/home/ubuntu# sudo tcpdump -i eth0 port 80 -vv tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:56:18.346625 IP (tos 0x0, ttl 52, id 12055, offset 0, flags [DF], proto TCP (6), length 60) 212-123-161-112.ip.telfort.nl.16386 ip-10-48-238-216.eu-west-1.compute.internal.www: Flags [S], cksum 0xb398 (correct), seq 2639758575, win 5840, options [mss 1460,sackOK,TS val 1223672 ecr 0,nop,wscale 6], length 0 13:56:18.346662 IP (tos 0x0, ttl 51, id 12055, offset 0, flags [DF], proto TCP (6), length 60) 212-123-161-112.ip.telfort.nl.16386 ww1dc1.shopreme.com.www: Flags [S], cksum 0x9ee0 (correct), seq 2639758575, win 5840, options [mss 1460,sackOK,TS val 1223672 ecr 0,nop,wscale 6], length 0 13:56:18.598747 IP (tos 0x0, ttl 52, id 10138, offset 0, flags [DF], proto TCP (6), length 60) 212-123-161-112.ip.telfort.nl.16387 ip-10-48-238-216.eu-west-1.compute.internal.www: Flags [S], cksum 0xac40 (correct), seq 2645658541, win 5840, options [mss 1460,sackOK,TS val 1223735 ecr 0,nop,wscale 6], length 0 13:56:18.598777 IP (tos 0x0, ttl 51, id 10138, offset 0, flags [DF], proto TCP (6), length 60) 212-123-161-112.ip.telfort.nl.16387 ww1dc1.shopreme.com.www: Flags [S], cksum 0x9788 (correct), seq 2645658541, win 5840, options [mss 1460,sackOK,TS val 1223735 ecr 0,nop,wscale 6], length 0 ^C 4 packets captured 4 packets received by filter 0 packets dropped by kernel the mentioned address relate to the following 212-123-161-112.ip.telfort.nl.16386 : my personal computer ww1dc1.shopreme.com.www : dns of server2 (2.2.2.2) ip-10-48-238-216.eu-west-1.compute.internal.www : amazon web services ec2 internal address of server1 (1.1.1.1) However, the tcpdump log on server2 (2.2.2.2) stays empty and I get no response back in my browser. I am able to ping from server1 to server2. And net.ipv4.ip_forward is set to 1 and so is /proc/sys/net/ipv4/ip_forward Could there be anything else that is missing?

  Read the article

• FreeBSD with Vagrant - don't know how to check guest additions version

  - by joelmaranhao

  On Mac OS X 10.9.3 Picked a box from the VagrantCloud Init the vagrant box $ vagrant init chef/freebsd-9.2-i386 A `Vagrantfile` has been placed in this directory. You are now ready to `vagrant up` your first virtual environment! Please read the comments in the Vagrantfile as well as documentation on `vagrantup.com` for more information on using Vagrant. List the files $ ls -al -rw-r--r-- 1 joel staff 4831 Jun 5 17:17 Vagrantfile Vagrantfile content VAGRANTFILE_API_VERSION = "2" Vagrant.configure(VAGRANTFILE_API_VERSION) do |config| config.vm.box = "chef/freebsd-9.2-i386" end Starting my virtual box leads to Errors $ vagrant up Bringing machine 'default' up with 'virtualbox' provider... ==> default: Box 'chef/freebsd-9.2-i386' could not be found. Attempting to find and install... default: Box Provider: virtualbox default: Box Version: >= 0 ==> default: Loading metadata for box 'chef/freebsd-9.2-i386' default: URL: https://vagrantcloud.com/chef/freebsd-9.2-i386 ==> default: Adding box 'chef/freebsd-9.2-i386' (v1.0.0) for provider: virtualbox default: Downloading: https://vagrantcloud.com/chef/freebsd-9.2-i386/version/1/provider/virtualbox.box ==> default: Successfully added box 'chef/freebsd-9.2-i386' (v1.0.0) for 'virtualbox'! ==> default: Importing base box 'chef/freebsd-9.2-i386'... ==> default: Matching MAC address for NAT networking... ==> default: Checking if box 'chef/freebsd-9.2-i386' is up to date... ==> default: Setting the name of the VM: freebsd92-i386_default_1401982167145_49633 ==> default: Fixed port collision for 22 => 2222. Now on port 2201. ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat ==> default: Forwarding ports... default: 22 => 2201 (adapter 1) ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2201 default: SSH username: vagrant default: SSH auth method: private key default: Warning: Connection timeout. Retrying... default: Warning: Connection timeout. Retrying... ==> default: Machine booted and ready! Sorry, don't know how to check guest version of Virtualbox Guest Additions on this platform. Stopping installation. ==> default: Checking for guest additions in VM... default: The guest additions on this VM do not match the installed version of default: VirtualBox! In most cases this is fine, but in rare cases it can default: prevent things such as shared folders from working properly. If you see default: shared folder errors, please make sure the guest additions within the default: virtual machine match the version of VirtualBox you have installed on default: your host and reload your VM. default: default: Guest Additions Version: 4.2.16 default: VirtualBox Version: 4.3 ==> default: Mounting shared folders... default: /vagrant => /Users/joel/Code/anybots/operations/robot/freebsd92-i386 Vagrant attempted to execute the capability 'mount_virtualbox_shared_folder' on the detect guest OS 'freebsd', but the guest doesn't support that capability. This capability is required for your configuration of Vagrant. Please either reconfigure Vagrant to avoid this capability or fix the issue by creating the capability. Note that I have recently installed the latest version of VirtualBox, but somehow I can't find the Guest Additions.

  Read the article

• ASA 5505 stops local internet when connected to VPN

  - by g18c

  Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

  Read the article

• Cisco 678 Will Not Work using PPPoE - Possibly Because I Configured it Incorrectly..?

  - by Brian Stinar

  I am attempting to configure a Cisco 678 because I am totally sick on my Actiontec. However, I am running into some problems. It seems as though the Cisco is able to train the line, but I am unable to ping out. I am all right at programming, but still learning a lot when it comes to being a system administrator. I apologize in advance if I did something ridiculous, or am attempting to configure this device to do something it was not designed to do. It is almost like I am not correctly configuring the device to grab it's IP using PPPoA (like my Actiontec.) The output from "show running" (below) makes me think this too. Below are the commands I ran in order to configure this: # en # set nvram erase # write # reboot # en # set nat enable # set dhcp server enable # set PPP wan0-0 ipcp 0.0.0.0 # set ppp wan0-0 dns 0.0.0.0 # set PPP wan0-0 login xxxxx // My actual login # set PPP wan0-0 password yyyyy // My actual password # set PPP restart enabled # set int wan0-0 close # set int wan0-0 vpi 0 # set int wan0-0 vci 32 # set int wan0-0 open # write # reboot Here is the output from a few commands I thought could provide some useful information: cbos#ping 74.125.224.113 Sending 1 8 byte ping(s) to 74.125.224.113 every 2 second(s) Request timed out cbos#show version Cisco Broadband Operating System CBOS (tm) 678 Software (C678-I-M), Version v2.4.9 - Release Software Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Nov 17 2004 15:26:29 DMT FULL firmware version G96 NVRAM image at 0x1030f000 cbos#show errors - Current Error Messages - ## Ticks Module Level Message 0 000:00:00:00 PPP Info IPCP Open Event on wan0-0 1 000:00:00:14 ATM Info Wan0 Up 2 000:00:00:14 PPP Info PPP Up Event on wan0-0 3 000:00:01:54 PPP Info PPP Down Event on wan0-0 Total Number of Error Messages: 4 cbos#show interface wan0 wan0 ADSL Physical Port Line Trained Actual Configuration: Overhead Framing: 3 Trellis Coding: Enabled Standard Compliance: T1.413 Downstream Data Rate: 1184 Kbps Upstream Data Rate: 928 Kbps Interleave S Downstream: 4 Interleave D Downstream: 16 Interleave R Downstream: 16 Interleave S Upstream: 4 Interleave D Upstream: 8 Interleave R Upstream: 16 Modem Microcode: G96 DSP version: 0 Operating State: Showtime/Data Mode Configured: Echo Cancellation: Disabled Overhead Framing: 3 Coding Gain: Auto TX Power Attenuation: 0dB Trellis Coding: Enabled Bit Swapping: Disabled Standard Compliance: T1.413 Remote Standard Compliance: T1.413 Tx Start Bin: 0x6 Tx End Bin: 0x1f Data Interface: Utopia L1 Status: Local SNR Margin: 19.0dB Local Coding Gain: 7.5dB Local Transmit Power: 12.5dB Local Attenuation: 46.0dB Remote Attenuation: 31.0dB Local Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 2 No Cell Delineation Interleaved: 0 Out of Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 Remote Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 1 No Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 cbos#show int wan0-0 WAN0-0 ATM Logical Port PVC (VPI 0, VCI 32) is configured. ScalaRate set to Auto AAL 5 UBR Traffic IP Port Enabled cbos#show running Warning: traffic may pause while NVRAM is being accessed [[ CBOS = Section Start ]] NSOS MD5 Enable Password = XXXX NSOS MD5 Root Password = XXXX NSOS MD5 Commander Password = XXXX [[ PPP Device Driver = Section Start ]] PPP Port User Name = 00, "XXXX" PPP Port User Password = 00, XXXX PPP Port Option = 00, IPCP,IP Address,3,Auto,Negotiation Not Required,Negotiable ,IP,0.0.0.0 PPP Port Option = 00, IPCP,Primary DNS Server,129,Auto,Negotiation Not Required, Negotiable,IP,0.0.0.0 PPP Port Option = 00, IPCP,Secondary DNS Server,131,Auto,Negotiation Not Require d,Negotiable,IP,0.0.0.0 [[ ATM WAN Device Driver = Section Start ]] ATM WAN Virtual Connection Parms = 00, 0, 32, 0 [[ DHCP = Section Start ]] DHCP Server = enabled [[ IP Routing = Section Start ]] IP NAT = enabled [[ WEB = Section Start ]] WEB = enabled cbos# wtf...? Thank you all very much for taking the time to read this, and the help.

  Read the article

• Configuring a PIX 506e for Asterisk

  - by orthogonal3

  Hi all! I'm having problems configuring a old Cisco PIX running 6.3 and wondered if anyone can lend a hand? Simply put I have a PIX 506e that I want to put in my VoIP data path. I can't update it and getting a compat version of Java for that version of PIX is tough so I can't log onto the web interface. The PIX straddles two networks..... 192.168.5.0 on the inside, ...50.0 on the outside both net masks are 255.255.255.0 I have a local Asterisk server cluster with a single service IP (<local asterisk>) SIP is on UDP 5060 and RTP (for the voip data) is on UDP 18000-18999 I know thats a big range but hey may as well. I need the 192.168.5.0 net to have web and ftp access for updates and the like. DHCP, DNS and NTP is already provided on that network so I don't need external DNS access. So I think I want the following rules: SIP or RTP from <my itsp> arriving at <outside voip ip> NATed to <local asterisk> SIP or RTP able to do the reverse route (should be covered by high sec - low sec??) HTTP and FTP access outbound for software update for the servers etc I have the following config at the minute - and I think I'm almost there (I hope)... interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password wouldyouliketobeapeppertoo encrypted passwd wouldyouliketobeapeppertoo encrypted hostname afirewall domain-name adomain fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 access-list acl_ping permit icmp any any access-list voip permit ip host <my itsp> host <local asterisk> mtu outside 1500 mtu inside 1500 ip address outside <outside pix ip> 255.255.255.0 ip address inside <inside pix ip> 255.255.255.0 arp timeout 14400 global (outside) 1 <outside generic ip> nat (inside) 1 192.168.5.0 255.255.255.0 0 0 static (inside,outside) <outside voip ip> <local asterisk> netmask 255.255.255.255 0 0 static (outside,inside) <local asterisk> <outside voip ip> netmask 255.255.255.255 0 0 access-group acl_ping in interface outside access-group acl_ping in interface inside route outside 0.0.0.0 0.0.0.0 <my next hop router> 1 route outside <my itsp> 255.255.255.255 <my next hop router> 1 I think I just need a hand with the access-lists and NAT/static rules. Would anyone be able to help as I've RTFM'd the Cisco docs a few times and they're heavy. Wishing I'd completed my CCNA now! Thanks all for any help, Phil

  Read the article

• Network config / gear question

  - by mcgee1234

  I have been tasked with setting up a fairly straightforward rack in a data center (we do not even need a whole rack, but this is the smallest allotment available). In a nutshell, 4 to 6 servers need to be able to reach 2 (maybe 3) vendors. The servers needs to be reachable over the internet. A little more detail - the networks the servers need to reach are inside of the data center, and are "trusted". Connections to these networks will be achieved through intra data center cross connects. It is kind of like a manufacturing line where we receive data from one vendor (burst-able up to 200 Mbits), churn through it on the servers, and then send out data to another vendor (bursts up to 20 Mbits). This series of events is very latency sensitive, so much so that it is common practice not to use NAT or a firewall on these segments (or so I hear). To reach the servers over the internet, I plan to use a site to site VPN. (This part is only relevant as far as hardware selection goes). I have 2 configurations in mind: Cisco 2911 (2921) (with the additional wan ports module) and a layer 2 switch - in this scenario, I would use the router also for VPN. Cisco 3560 layer 3 switch to interconnect the networks inside of the data center and an ASA 5510 (which is total overkill, but the 5505 is not rack mountable) as a firewall for the Wan side (internet) and VPN. I envision the setup to be as follows: Internet - ASA - 3560 Vendors - 3560 - Servers The general idea is that the ASA acts as a firewall and VPN device and the 3560 does all the heavy lifting. The first is a fairly traditional setup but my concern is performance. The second is somewhat unorthodox in that the vendors are directly connected to the layer 3 switch without passing through a firewall. Based on my understanding however, a layer 3 switch will perform substantially better as it will do hardware (ASIC) vs. software switching. (Note that number 2 is a little over the budget, but not unworkable (double negative, ugh)) Since this is my first time dealing with a data center, I am not sure what the IP space is going to look like. I suspect I will retain a block(s) of public IPs, vlan them to individual interfaces for the vendor connections and the servers (which will not reachable from the wan side of course) and setup routing on the switch. So here are my questionss: Is there a substantial performance difference between 1 and 2, i.e. hardware based switching on a layer 3 vs a software base on the 2911? I have trolled the internet and found a lot of Cisco literature, but nothing that I could really use to get a good handle. The vendors we connect to are secure and trusted (famous last words) and as I understand it, it is common practice not to NAT or firewall these connections (because of the aforementioned latency sensitivity). But what what kind of latency are we really talking about if I push the data through a router (or even ASA for that matter)? For our purposes, 5 ms will not kill us, 20 or 30 can be very costly. Others measure in microseconds, but they are out of our league. Is there any issues with using public IPs on a layer 3 switch? I am certainly not married to either of these configs, and I am totally open to any ideas. My knowledge (and I use the term loosely) is largely from books so I welcome any advice / insight. Thanks in advance.

  Read the article

• The Value of SOA Specialization - Fujitsu

  - by Jürgen Kress

  Thanks for the nice ink The Value of Specialization In my last post  I talked about Fujitsu's achievement in obtaining SOA and other specializations, but I have heard murmurings from other partners about what just is the value? I think Oracle have to do more to advertise the benefits to customers, we need to see customers asking for specialization for it to really work, but Oracle have made great promises about only recommending those partners who are specialized. For us there was another benefit. Oracle was sponsoring the 3rd Annual SOA Symposium in Berlin and invited us as their first specialized partner to take part. There is a great blog about the symposium on the SOA community blog site. This is real commitment from Oracle and we have other marketing opportunities being worked on with Jürgen. This does generate leads so my message to other Oracle Partners is, you need to do this, it is worthwhile.   Fujitsu - First SOA Specialized Partner Globally Just before Oracle Open World I found out that Fujitsu had achieved the first SOA Specialization globally. I think most partners know what the requirements are for Specialization and that in itself is challenging but the bureaucracy around the actual submission is an exercise in tenacity. I won’t go into that now; I have had my dig at Oracle this month, but enough to say the process could be improved. As a platinum partner we needed 5 specializations and we decided to go for SOA first. The reasoning behind this is that our Oracle Practice is known for being applications centric. We have always had an excellent technical capability but no one ever talked about that, it was just part and parcel of an implementation. However today we have just as many bids that are technology lead as there is applications lead, so it seemed a good plan to work on the areas we were not known for. We appointed a capability lead to be responsible for putting the team through the training and testing and Rosemary (Kell) was excellent, she ensured that everyone was on track and that it wasn’t just getting put into the ‘to do list’. In Fujitsu everyone in the Oracle Practice has an objective to achieve the competency tests in their area, so achieving the 2 pre sales, 2 sales and 1 support was no problem at all. We actually had 22 with the support capability proficiency.  The implementation specialist exams are much harder, more like OCP in the database area. We had help from the Oracle SOA Community; Jürgen Kress who runs this in EMEA is really motivational. At the time we started SOA was a beta exam which means you do not get the results immediately but again we put forward more than we needed. Manjit Chopra, Sukhraj Sahota, Emely Patra, Ian Scorrer and Sunny Sidhu all took the exam and eventually got the results they wanted they had passed. Congratulations. Here is Jurgen expalining why specialization is important. After the tests came the submissions where you need to include deals and experience, this was my bit, and persuading Oracle we really deserved the specialization. Finally we got the news we had been awarded the specialization, and a few days later that we were first globally. I am very proud. However there is no rest for the wicked and we plodded on to make the 5 specializations needed for Platinum and now we are working on the new Diamond status and I think SOA will be one of our 5 ‘super specializations’. This is a global Fujitsu initiative and I work closely with my colleague in Germany Jessika Weiss. It was nice to be able to have a press release about this and a comment from Judson Althoff  head of Oracle Alliances. For more information on SOA Specialization and the SOA Partner Community please feel free to register at www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Wiki Website Technorati Tags: SOA,SOA Community,OPN,Oracle,Fujitsu,Debra Lilley,Jürgen Kress,Specialization,SOA Specialization

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >