Search Results

Search found 753 results on 31 pages for 'perlin noise'.

Page 28/31 | < Previous Page | 24 25 26 27 28 29 30 31  | Next Page >

• Airport Express chokes Wi-Fi for a few seconds, several times per hour. Any idea why?

  - by user13727

  I'm using a MacBookPro connected to an AiportExpress' Wi-FI network. Every once in a while, the Wi-Fi will choke up and either drop some packets, or lag horribly for several seconds. I'm losing hair over this because every time I chat on Skype, the call hangs randomly due to this problem. Any idea what's wrong? Some more details: two networks are set up: 2.4Ghz and 5Ghz, and the issue happens on both the network uses WPA2 Personal for security the Airport is in the same room with my computer the Airport is fairly new, bought this summer, model number off the back: A1392 tried connecting to a neighbours wifi to see if it's a problem with my computer, or interference. It's not, it doesn't happen on their network. tried resetting it several times tried changing channels manually Ping results are below, so you can see what I'm talking about. EDIT: 10.0.1.1 is the Airport's IP 64 bytes from 10.0.1.1: icmp_seq=1795 ttl=255 time=0.813 ms 64 bytes from 10.0.1.1: icmp_seq=1796 ttl=255 time=3.335 ms 64 bytes from 10.0.1.1: icmp_seq=1797 ttl=255 time=3.403 ms 64 bytes from 10.0.1.1: icmp_seq=1798 ttl=255 time=3.414 ms 64 bytes from 10.0.1.1: icmp_seq=1799 ttl=255 time=3.227 ms 64 bytes from 10.0.1.1: icmp_seq=1800 ttl=255 time=3.274 ms 64 bytes from 10.0.1.1: icmp_seq=1801 ttl=255 time=3.253 ms 64 bytes from 10.0.1.1: icmp_seq=1802 ttl=255 time=3.292 ms >>>> choke starts <<< 64 bytes from 10.0.1.1: icmp_seq=1803 ttl=255 time=53.977 ms 64 bytes from 10.0.1.1: icmp_seq=1804 ttl=255 time=35.049 ms 64 bytes from 10.0.1.1: icmp_seq=1805 ttl=255 time=19.820 ms >>>> choke ends <<< 64 bytes from 10.0.1.1: icmp_seq=1806 ttl=255 time=0.716 ms 64 bytes from 10.0.1.1: icmp_seq=1807 ttl=255 time=0.705 ms 64 bytes from 10.0.1.1: icmp_seq=1808 ttl=255 time=0.919 ms 64 bytes from 10.0.1.1: icmp_seq=1809 ttl=255 time=0.659 ms 64 bytes from 10.0.1.1: icmp_seq=1810 ttl=255 time=0.877 ms 64 bytes from 10.0.1.1: icmp_seq=1811 ttl=255 time=0.679 ms 64 bytes from 10.0.1.1: icmp_seq=1812 ttl=255 time=0.854 ms 64 bytes from 10.0.1.1: icmp_seq=1813 ttl=255 time=0.644 ms 64 bytes from 10.0.1.1: icmp_seq=1814 ttl=255 time=3.779 ms ... time passes .. 64 bytes from 10.0.1.1: icmp_seq=1599 ttl=255 time=0.674 ms 64 bytes from 10.0.1.1: icmp_seq=1600 ttl=255 time=0.930 ms 64 bytes from 10.0.1.1: icmp_seq=1601 ttl=255 time=0.665 ms 64 bytes from 10.0.1.1: icmp_seq=1602 ttl=255 time=1.085 ms Request timeout for icmp_seq 1603 Request timeout for icmp_seq 1604 64 bytes from 10.0.1.1: icmp_seq=1605 ttl=255 time=104.969 ms 64 bytes from 10.0.1.1: icmp_seq=1606 ttl=255 time=11.521 ms 64 bytes from 10.0.1.1: icmp_seq=1607 ttl=255 time=0.926 ms 64 bytes from 10.0.1.1: icmp_seq=1608 ttl=255 time=0.993 ms 64 bytes from 10.0.1.1: icmp_seq=1609 ttl=255 time=0.745 ms And the Signal-Noise ratio:

  Read the article

• how to setup kismet.conf on Ubuntu

  - by Registered User

  I installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine. but when I launch it I see following error kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. I followed this guide http://www.ubuntugeek.com/kismet-an-802-11-wireless-network-detector-sniffer-and-intrusion-detection-system.html#more-1776 how ever in kismet.conf I am not clear with following line source=none,none,addme as to what should I change this to. lspci -vnn shows 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Subsystem: Dell Device [1028:000c] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f69fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, ssb and iwconfig shows lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"WIKUCD" Mode:Managed Frequency:2.462 GHz Access Point: <00:43:92:21:H5:09> Bit Rate=11 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Managementmode:All packets received Link Quality=1/5 Signal level=-81 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:169 Invalid misc:0 Missed beacon:0 So what should I be putting in place of source=none,none,addme with output I mentioned above ?

  Read the article

• System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

  - by MGOwen

  Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

  Read the article

• Need help troubleshooting highly variable ping times

  - by Elliot.Bradshaw

  I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

  Read the article

• AGENT: The World's Smartest Watch

  - by Rob Chartier

  AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013.  All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3.  The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK.  You can download the tooling now and get started with Apps and Faces immediately.  The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework.   Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models.   The watch on the tiny QI Charter   If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message.   An app showing the premium weather data!   Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

  Read the article

• Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

  - by Jason Fitzpatrick

  You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

  Read the article

• Seriously, It’s Time to Get Your Content Act Together

  - by Mike Stiles

  Branded content, content marketing, social content, brand journalism, we’re seeing those terms more and more. Why? The technology tools are coming together. We should know. We can gather big data, crunch it, listen to the public, moderate, respond, get to know the customer intimately, know what they like, know what they want, we can target, distribute, amplify, measure engagement and reaction, modify strategy and even automate a great deal of all that. An amazing machine, a sleek, smooth-running engine has been built such that all the parts can interact and work together to deliver peak performance and maximum output. But that engine isn’t going anywhere without any gas. Content is the gas. Yes, we curate other people’s content. We can siphon their gas. There’s tech to help with that too. But as for the creation of original, worthwhile content made for a specific audience, our audience, machines can’t do that…at least not yet. Curated content is great. But somebody has to originate the content for it to be curated and shared. And since the need for good, curated content is obviously large and the desire to share is there, it’s a winning proposition for a brand to be a consistent producer of original content. And yet, it feels like content is an issue we’re avoiding. There’s a reluctance to build a massive pipeline if you have no idea what you’re going to run through it. The C-suite often doesn’t know what content is, that it’s different from ads, where to get it, who makes it, how long it should be, what the point of it is if there’s no hard sell of the product, what it costs, how to use it, how to measure it, how to make sure it’s good, or how to make sure it will keep flowing. It could be the reason many brands aren’t pulling the trigger on socially enabling the enterprise. And that’s a shame, because there are a lot of creative, daring, experimental, uniquely talented entertainers and journalists chomping at the bit to execute content for brands. But for many corporate executives, content is “weird,” and the people who make it are even weirder. The content side of the equation is human. It’s art, but art that can be informed by data. The natural inclination is for brands to turn to their agencies for such creative endeavors. But agencies are falling into one of two categories. They’re failing to transition from ads to content. In “Content Era, What’s the Role of Agencies?” Alexander Jutkowitz says agencies were made for one-hit campaigns, not ongoing content. Or, they’re ready and capable but can’t get clients to do the right things. Agencies have to make money, even if it means continuing to do the wrong things because that’s all the client will agree to. So what we wind up with in the pipeline is advertising, marketing-heavy content, content that was obviously created or spearheaded by non-creative executives, random & inconsistent content, copy written for SEO bots, and other completely uninteresting nightmares. Frank Rose, author of “The Art of Immersion,” writes, “Content without story and excitement is noise pollution.” In the old days, you made an ad and inserted it into shows made by people who knew what they were doing. You could bask in that show’s success and leverage their audience. Now, you are tasked with attracting, amassing and holding your own audience. You may just want to make, advertise and sell your widgets. But now there’s a war on for a precious commodity, attention. People are busy. They have filters to keep uninteresting and irrelevant things out. They value their time and expect value back when they give it up. Joe Pulizzi, founder of the Content Marketing Institute, says, "Your customers don't care about you, your products, your services…they care about themselves, their wants and their needs." Is it worth getting serious about content and doing it right? 61% of consumers feel better about a company that delivers custom content (Custom Content Council). Interesting content is one of the top 3 reasons people follow brands on social (Content+). 78% of consumers think organizations that provide custom content want to build good relationships with them (TMG Custom Media). On the B2B side, 80% of business decision makers prefer to get company info in a series of articles vs. an ad. So what’s the hang-up? Cited barriers to content marketing are lack of human resources (42%) and lack of budget (35%). 54% of brands don’t have a single on-site, dedicated content creator. And only 38% of brands have a content marketing strategy. Tech has built the biggest, most incredible stage for brands that’s ever been built. Putting something on that stage is your responsibility. Do a bad show, or no show at all, and you’ll be the beautiful, talented actress that never got discovered. @mikestilesPhoto: Gabriella Fabbri, stock.xchng

  Read the article

• CQRS - Benefits

  - by Dylan Smith

  Thanks to all the comments and feedback from the last post I think I have a better understanding now of the benefits of CQRS (separate from the benefits of Event Sourcing). I’m going to try and sum it up here, and point out some areas where I could still use some advice: CQRS Benefits Sounds like the primary benefit of CQRS as an architecture is it allows you to create a simpler domain model by sucking out everything related to queries. I can definitely see the benefit to this, in general the domain logic related to commands is the high-value behavior in the software, but the logic required to service the queries would add a lot of low-value “noise” to the domain model that would dilute the high-value (command) behavior – sorting, paging, filtering, pre-fetch paths, etc. Also the most appropriate domain structure for implementing commands might not be the most optimal for implementing queries. To paraphrase Greg, this usually results in a domain model that is mediocre at both, piss-poor at one, or more likely piss-poor at both commands and queries. Not only will you be able to simplify your domain model by pulling out all the query logic, but at least a handful of commands in most systems will probably be “pass-though” type commands with little to no logic that just generate events. If these can be implemented directly in the command-handler and never touch the domain model, this allows you to slim down the domain model even more. Also, if you were to do event sourcing without CQRS, you no longer have a database containing the current state (only the domain model would) which makes it difficult (or impossible) to support ad-hoc querying and/or reporting that is common in most business software. Of course CQRS provides some great scalability benefits, not only scalability but I have to assume that it provides extremely low latency for most operations, especially if you have an asynchronous event bus. I know Greg says that you get a 3x scaling (Commands, Queries, Client) of your ability to perform parallel development, but IMHO, it seems like it only provides 1.5x scaling since even without CQRS you’re going to have your client loosely coupled to your domain - which is still a great benefit to be able to realize. Questions / Concerns If all the queries against an aggregate get pulled out to the Query layer, what if the only commands for that aggregate can be handled in a “pass-through” manner with the command handler directly generating events. Is it possible to have an aggregate that isn’t modeled in the domain model? Are there any issues or downsides to this? I know in the feedback from my previous posts it was suggested that having one domain model handling both commands and queries requires implementing a lot of traversals between objects that wouldn’t be necessary if it was only servicing commands. My question is, do you include traversals in your domain model based on the needs of the code, or based on the conceptual domain model? If none of my Commands require a Customer.Orders traversal, but the conceptual domain includes the concept of a set of orders belonging to a customer – should I model that in my domain model or not? I like the idea of using the Query side of the architecture as a place to put junior devs where the risk of them screwing something up has minimal impact. But I’m not sold on the idea that you can actually outsource it. Like I said in one of my comments on my previous post, the code to handle a query and generate DTO’s is going to be dead simple, but the code to process events and apply them to the tables on the query side is going to require a significant amount of domain knowledge to know which events to listen for to update each of the de-normalized tables (and what changes need to be made when each event is processed). I don’t know about everybody else, but having Indian/Russian/whatever outsourced developers have to do anything that requires significant domain knowledge has never been successful in my experience. And if you need to spec out for each new query which events to listen to and what to do with each one, well that’s probably going to be just as much work to document as it would be to just implement it. Greg made the point in a comment that doing an aggregate query like “Total Sales By Customer” is going to be inefficient if you use event sourcing but not CQRS. I don’t understand why that would be the case. I imagine in that case you’d simply have a method/property on the Customer object that calculated total sales for that customer by enumerating over the Orders collection. Then the application services layer would generate DTO’s off of the Customers collection that included say the CustomerID, CustomerName, TotalSales, or whatever the case may be. As long as you use a snapshotting implementation, I don’t see why that would be anymore inefficient in a DDD+Event Sourcing implementation than in a typical DDD implementation. Like I mentioned in my last post I still have some questions about query logic that haven’t been answered yet, but before I start asking those I want to make sure I have a strong grasp on what benefits CQRS provides.  My main concern with the query logic was that I know I could just toss it all into the query side, but I was concerned that I would be losing the benefits of using CQRS in the first place if I did that.  I want to elaborate more on this though with some example situations in an upcoming post.

  Read the article

• Exitus Acta Probat: The Post-Processing Module

  - by Phil Factor

  Sometimes, one has to make certain ethical compromises to ensure the success of a corporate IT project. Exitus Acta Probat (literally 'the result validates the deeds' meaning that the ends justify the means)It was a while back, whilst working as a Technical Architect for a well-known international company, that I was given the task of designing the architecture of a rather specialized accounting system. We'd tried an off-the-shelf (OTS) Windows-based solution which crashed with dispiriting regularity, and didn't quite do what the business required. After a great deal of research and planning, we commissioned a Unux-based system that used X-terminals for the desktops of  the participating staff. X terminals are now obsolete, but were then hot stuff; stripped-down Unix workstations that provided client GUIs for networked applications long before the days of AJAX, Flash, Air and DHTML. I've never known a project go so smoothly: I'd been initially rather nervous about going the Unix route, believing then that  Unix programmers were excitable creatures who were prone to  indulge in role-play enactments of elves and wizards at the weekend, but the programmers I met from the company that did the work seemed to be rather donnish, earnest, people who quickly grasped our requirements and were faultlessly professional in their work.After thinking lofty thoughts for a while, there was considerable pummeling of keyboards by our suppliers, and a beautiful robust application was delivered to us ahead of dates.Soon, the department who had commissioned the work received shiny new X Terminals to replace their rather depressing lavatory-beige PCs. I modestly hung around as the application was commissioned and deployed to the department in order to receive the plaudits. They didn't come. Something was very wrong with the project. I couldn't put my finger on the problem, and the users weren't doing any more than desperately and futilely searching the application to find a fault with it.Many times in my life, I've come up against a predicament like this: The roll-out of an application goes wrong and you are hearing nothing that helps you to discern the cause but nit-*** noise. There is a limit to the emotional heat you can pack into a complaint about text being in the wrong font, or an input form being slightly cramped, but they tried their best. The answer is, of course, one that every IT executive should have tattooed prominently where they can read it in emergencies: In Vino Veritas (literally, 'in wine the truth', alcohol loosens the tongue. A roman proverb) It was time to slap the wallet and get the department down the pub with the tab in my name. It was an eye-watering investment, but hedged with an over-confident IT director who relished my discomfort. To cut a long story short, The real reason gushed out with the third round. We had deprived them of their PCs, which had been good for very little from the pure business perspective, but had provided them with many hours of happiness playing computer-based minesweeper and solitaire. There is no more agreeable way of passing away the interminable hours of wage-slavery than minesweeper or solitaire, and the employees had applauded the munificence of their employer who had provided them with the means to play it. I had, unthinkingly, deprived them of it.I held an emergency meeting with our suppliers the following day. I came over big with the notion that it was in their interests to provide a solution. They played it cool, probably knowing that it was my head on the block, not theirs. In the end, they came up with a compromise. they would temporarily descend from their lofty, cerebral stamping grounds  in order to write a server-based Minesweeper and Solitaire game for X Terminals, and install it in a concealed place within the system. We'd have to pay for it, though. I groaned. How could we do that? "Could we call it a 'post-processing module?" suggested their account executive.And so it came to pass. The application was a resounding success. Every now and then, the staff were able to indulge in some 'post-processing', with what turned out to be a very fine implementation of both minesweeper and solitaire. There were several refinements: A single click in a 'boss' button turned the games into what looked just like a financial spreadsheet.  They even threw in a multi-user version of Battleships. The extra payment for the post-processing module went through the change-control process without anyone untoward noticing, and peace once more descended. Only one thing niggles. Those games were good. Do they still survive, somewhere in a Linux library? If so, I'd like to claim a small part in their production.

  Read the article

• Get your content off Blogger.com

  - by Daniel Moth

  Due to blogger.com deprecating FTP users I've decided to move my blog. When I think of the content of a blog, 4 items come to mind: blog posts, comments, binary files that the blog posts linked to (e.g. images, ZIP files) and the CSS+structure of the blog. 1. Binaries The binary files you used in your blog posts are sitting on your own web space, so really blogger.com is not involved with that. Nothing for you to do at this stage, I'll come back to these in another post. 2. CSS and structure In the best case this exists as a separate CSS file on your web space (so no action for now) or in a worst case, like me, your CSS is embedded with the HTML. In the latter case, simply navigate from you dashboard to "Template" then "Edit HTML" and copy paste the contents of the box. Save that locally in a txt file and we'll come back to that in another post. 3. Blog posts and Comments The blog posts and comments exist in all the HTML files on your own web space. Parsing HTML files to extract that can be painful, so it is easier to download the XML files from blogger's servers that contain all your blog posts and comments. 3.1 Single XML file, but incomplete The obvious thing to do is go into your dashboard "Settings" and under the "Basic" tab look at the top next to "Blog Tools". There is a link there to "Export blog" which downloads an XML file with both comments and posts. The problem with that is that it only contains 200 comments - if you have more than that, you will lose the surplus. Also, this XML file has a lot of noise, compared to the better solution described next. (note that a tool I will refer to in a future post deals with either kind of XML file) 3.2 Multiple XML files First you need to find your blog ID. In case you don't know what that is, navigate to the "Template" as described in section 2 above. You will find references to the blog id in the HTML there, but you can also see it as part of the URL in your browser: blogger.com/template-edit.g?blogID=YOUR_NUMERIC_ID. Mine is 7 digits. You can now navigate to these URLs to download the XML for your posts and comments respectively: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=1 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=1 Note that you can only get 500 posts at a time and only 200 comments at a time. To get more than that you have to change the URL and download the next batch. To get you started, to get the XML for the next 500 posts and next 200 comments respectively you’d have to use these URLs: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=501 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=201 ...and so on and so forth. Keep all the XML files in the same folder on your local machine (with nothing else in there). 4. Validating the XML aka editing older blog posts The XML files you just downloaded really contain HTML fragments inside for all your blog posts. If you are like me, your blog posts did not conform to XHTML so passing them to an XML parser (which is what we will want to do) will result in the XML parser choking. So the next step is to fix that. This can be no work at all for you, or a huge time sink or just a couple hours of pain (which was my case). The process I followed was to attempt to load the XML files using XmlDocument.Load and wait for the exception to be thrown from my code. The exception would point to the exact offending line and column which would help me fix the issue. Rather than fix it in the XML itself, I would go back and edit the offending blog post and fix it there - recommended! Then I'd repeat the cycle until the XML could be loaded in the XmlDocument. To give you an idea, some of the issues I encountered are: extra or missing quotes in img and href elements, direct usage of chevrons instead of encoding them as &lt;, missing closing tags, mismatched nested pairs of elements and capitalization of html elements. For a full list of things that may go wrong see this. 5. Opportunity for other changes I also found a few posts that did not have a category assigned so I fixed those too. I took the further opportunity to create new categories and tag some of my blog posts with that. Note that I did not remove/change categories of existing posts, but only added.   In an another post we'll see how to use the XML files you stored in the local folder… Comments about this post welcome at the original blog.

  Read the article

• Red Gate does Byte Night 2012

  - by red(at)work

  On the 5th of October 2012, a team of nine plucky Red Gaters braved the howling wind and the driving rain to sleep outside. No tents or mattresses were allowed – all we took for protection were sleeping bags, groundsheets, plastic sacks and Colin’s enormous fishing umbrella (a godsend in umbrella-y disguise). Why would we do such a thing? For Byte Night, an annual tech sector sleepout in support of Action for Children, who tackle the causes as well as the consequences of youth homelessness. Byte Night encourages technology professionals to do for one night a year what thousands of young people have to do every night – sleep rough.  We signed up for Byte Night in the warm, heady midst of the British summer, thinking it couldn’t possibly be all that bad. Even on the night itself – before the rain began to fall, sat in the comfort and warmth of a company canteen, drinking wine and eating chill and preparing to win the pub quiz – we were excited and optimistic about the night that lay ahead of us. All of that changed as soon as we stepped out into one of the worst rainstorms of the year. Brian, the team’s birthday boy, describes it best: Picture the scene: it’s 3 am on a Friday. I’m lying outside, fully clothed in a sleeping bag, wearing a raincoat, trussed up inside a large plastic pocket, on a ground sheet beneath a giant umbrella, wedged so tightly between two of my colleagues that I can’t move my arms. I’m wide awake, staring up at the grey sky beyond the edge of the umbrella; a limp, flickering white glow hints at a moon somewhere behind the drifting clouds. I haven’t slept since we first moved outside at 11 pm. Outside. Did I mention we were outside? I’m hung over. I need the loo. But there is no way on earth that I’m getting out of this sleeping bag. It’s cold. It’s raining. Not just raining, but chucking it down. It’s been doing this non-stop since 10pm. The rain sounds like a hyperactive drummer on the fishing umbrella, and the noise is loud and relentless. Puddles of water are forming all over the groundsheet, and, despite being ensconced inside the plastic pouch, I am wet. The fishing umbrella is protecting me from the worst of the driving rain, but not all of me is under it, and five hours of rain is no match for it. Everything is wet. My left side has become horribly damp. My trainers, which I placed next to my sleeping bag, are now completely soaked through. Mmm. That’ll be fun in the morning. My head is next to Colin’s head on one side, and a multi-pack of McCoy’s cheddar and onion crisps on the other. Don’t ask about the tub of hummus. That’s somewhere down by my ankles, abandoned to the night. Jess, who is lying next to me, rolls over onto her side. A mini waterfall cascades from her rain-pouch onto my face. Bah. I continue to stare into the heavens, willing the dawn to hurry up. Something lands on my face. It’s a mosquito. Great. Midnight, when this still seemed like fun – when we opened some champagne and my colleagues presented me with a caterpillar birthday cake, when everyone was drunk and jolly and full of stoic resolve – feels like a long time ago. Did I mention that today is my birthday? The remains of the caterpillar cake endure the same fate as the hummus, left out in the rain like a metaphor for sadness. It’s getting colder. I can see my breath. Silence has descended on the group, apart from the rustle of plastic. And the rain, obviously. Someone snores, and I envy whoever it is the sweet escape of sleep. I try to wriggle a bit further down inside my sleeping bag, but it doesn’t want to be wriggled into. Only 3 hours till dawn. 180 minutes. I begin to count them off, one at a time.  All nine of us got to go home in the morning, but thousands of children across the UK don’t have that luxury. If you’d like to sponsor the Red Gate Byte Night team, our JustGiving page can be found here.   Chris, before the outside bit actually happened. More photos from Byte Night Cambridge 2012 can be found here.

  Read the article

• Happy 3rd Birthday SilverlightCream!

  - by Dave Campbell

  Happy 3rd Birthday!     Yesterday (May 16) was the 'Birthday' of SilverlightCream, which started just after MIX in 2007 with a post "Interesting Silverlight posts today: Silverlight Control & Silverlight Pad". Too many good posts flying around led me to want to archive them, particularly since I was being aggregated at a new site Silverlight.net, and I could give some of that 'reach' to the community. Saturday's post was number 862, and as of that post, there were 5697 blog posts archived in the database all tagged up and searchable at SilverlightCream.com using the search page. The search needs to be better, and that's another discussion, but it does work. The blog didn't begin life as the SilverlightCream blog, as is obvious from the name, but once I realized people were following it closely, I've tried to keep the signal-to-noise ratio very high. I even secured another blog for when I just want to rant about something to keep that stuff out of this one :) If you've been around since MIX07 days you've heard all this, but after talking to some people at MIX10 I realized not everyone knows all the ways the information is presented, so I figured doing a post like this once a year probably isn't a bad idea :) I scrounge through an ever-growing list of blogs (right now sitting at 505) looking for good stuff. I try to spin through the list every day, but with the list growing that large, it's getting tough. I usually use it as a background task while working or watching TV. If I just sit and go through the blogs it takes about an hour. The list is long enough now that from time to time, I'll only get partway through it and have 10 to 13 entries, so I'll just stop there and go on the next day... I don't like to have more than 15 in any single post. It's all pattern recognition as in "seen that", "seen that", "that's new", etc... so if you're a blogger, look at a heading below for some comments about blogging from my perspective. When I see something new, I make sure you're not pulling a 'Mike Taulty' on me and dumping 6 or 8 new posts in one day :), and I tag the ones I want to review. If there's not a lot going on, I may just push the posts as I come across them. Some days there may be 60 posts in that 'to review' list! Some are non-Silverlight, some are essentially duplicates of others, some are demos, ads, new releases of something, session materials, etc. I push lots of material into a database at WynApse.com, and the "Tagged Posts" menu on the left sidebar there takes you to a tag cloud of (at this very moment) "9224 articles tagged 13915 different ways using 459 unique tags". There are links in there on Gibson guitars, Jazz Guitar instructional stuff, Ford F-250 links, and tons of technical and non-technical stuff I've been aggregating for about 5 years now. So when I decide to blog (or shoutout) something, I first push it into the database at WynApse.com. Then I tag it all up and push it into the database at SilverlightCream.com. Then it gets pushed to @SilverlightNews. For a little over a year now, we're tracking unique IP hits on posts launched from either the blog post or from one of the SilverlightCream.com pages, and the posts with top hits from unique IP addresses in the last 7 days are displayed in a 'Skim' page at SilverlightCream... and that page needs work as well. The Skim page and tracking was the brainchild of my buddy Michael Washington. What I blog/shoutout After some time doing posts, I decided there were things that probably have no need to be searchable, but are good information, so I post those as 'Shoutouts'. Eventually I also decided the Shoutouts should get posted to @SilverlightNews, and that's now taking place. Notes to bloggers Remember I said spinning throught the Big List-o-BlogsTM is pattern recognition... that means I don't spend a lot of time on any individual blog deciding if it has new content. If you're familiar with the term 'Above the Fold', then you're probably ok. If I have to scroll the page to see if there's something new, or wade through some maze of menus, I'm probably going to miss new stuff. Likewise if you only show the latest on the front page and make it a puzzle to find the rest of them, or if you make the titles and initial graphics almost identical to the previous article, I'll miss it. Another thing is name/brand-recognition. Far be it for me (WynApse) to comment on someone blogging with a pseudonym, but if you want to get get some recognition, you are going to want your name to be available somewhere. I can think right off the top of my head of a couple good blogs that I have no idea of the individuals' real names. I can pull that off a bit because I've been around so long almost everyone knows who I am, but if you're new to the blog-o-sphere, being able to be name-recognized is as important as getting your brand out there. Kick my tires Finally, stuff happens... I may hit the wrong key and delete your blog, or a post might slip past me and I not realize it's new because of the naming, and never blog it. If you think I missed something, send me an email or use the submit page at SilverlightCream.com. Some bloggers have figured out that if they submit (one way or another) to me, their posts will go out next. I try to honor anyone that takes the time to submit with a quicker 'Cream posting. Thanks! Finally, thanks to everyone that contributes to the community as a whole... the blogs, the videos, and the presentations. A special thanks to everyone that reads SilverlightCream, or follows @WynApse or @SilverlightNews. Keep it all coming, and... Stay in the 'Light

  Read the article

• Top ten things that don't make sense in The Walking Dead

  - by iamjames

  For those of you that don't know, The Walking Dead is a popular American TV show on AMC about a group of people trying to survive in a zombie-filled world.Here's the top ten eleven things that don't make sense on the show (and have never been explained) 1)  They never visit stores.  No Walmarts, Kmarts, Targets, shopping malls, pawn shops, gas stations, etc.  You'd think that would be the first place you'd visit for supplies, but they never have.  Not once.  There was a tiny corner store they visited in a small town, and while many products were already gone they did find several useful items.  2)  They never raid houses.  Why not?  One would imagine that they would want to search houses for useful items, but they don't.3)  They don't use 2 way radios.  Modern 2-way radios have a 36-mile range.  That's probably best possible range, but even if the range is only 10% of that, 3.6 miles, that's still more than enough for most situations, for the occasional "hey zombies attacking can you give me a hand?" or "there's zombies walking by stay inside until they leave" or "remember to pick up milk at the store love mom".  And yes they would need batteries or recharging, but they have been using gas-powered generators on the show and I'm sure a car charger would work.4)  They use gas-guzzling vehicles.  Every vehicle they have is from the 80s or 90s except for the new Kia SUV there for product placement.  Why?  They should all be driving new small SUVs or hybrids.  Visit a dealership and steal more fuel-efficient vehicles, because while the Walmart's might be empty from people raiding them for supplies, I'm sure most people weren't thinking "Gee, I should go car shopping" when the infection hit5)  They drive a motorcycle.  Seriously?  Let's find the least protective vehicle and drive that.  And while motorcycles get reasonable gas mileage, 5 people in a SUV gets better gas mileage per person than 5 people all driving motorcycles so it doesn't make economical sense either.6)  They drive loud vehicles.  The motorcycle used is commonly referred to as a chopper and is about as loud as a motorcycle can get.  The zombies are attracted to loud noise, so wouldn't it make more sense to drive vehicles that makes less sound?  Because as soon as you stop the bike and get off you're surrounded by zombies that heard you coming.  And it's not just the bike, the ~1980s Chevy SUV in the show is also very loud.7)  They never run out of food.  Seems like that would be a almost daily struggle, keeping enough food available for about a dozen people, yet I've never seen them visit a grocery store or local convenience store to stock up.8)  They don't carry swords, machetes, clubs, etc.  Let's face it, biting is not a very effective means of attack.  It's good for animals because they have fangs and little else, but humans have been finding better ways of killing each other since forever.  So why doesn't everyone on the show carry a sword or machete or at least a baseball bat?  Anything is better than wasting valuable bullets all the time.  Sure, dozen zombies approaching?  Shoot them.  One zombie approaching?  Save the bullet, cut off it's head.  9)  They do not wear protective clothing.  Human teeth are not exactly the sharpest teeth in the animal kingdom.  The leather shoes your dog ripped to shreds within minutes would probably take you days to bite through.  So why do they walk around half-naked?  Yes I know it's hot in Atlanta, but you'd think they'd at least have some tough leather coats or something for protection.  Maybe put a few small vent holes in the fabric if it's really hot.  Or better:  make your own chainmail.  Chainmail was used for thousands of years for protection from swords and is still used by scuba divers for protection from sharks.  If swords and sharks can't puncture it, human teeth don't stand a chance.  10)  They don't build barricades or dig trenches around properties.  In Season 2 they stayed at a farm in the middle of no where.  While being far away from people is a great way to stay far away from zombies, it would still make sense to build some sort of defenses.  Hordes of zombies would knock down almost any fence, but what about a trench or moat?  Maybe something not too wide so it can be jumped over easily but a zombie would fall into because I haven't seen too many jumping zombies on the show.  11)  They don't live in a mall or tall office building.  A mall would be perfect.  They have large security gates designed to keep even hundreds of people from breaking in and offer lots of supplies and food.  They're usually hundreds of thousands of square feet and fully enclosed, one could probably live their entire life happily in a mall.  Tall office building with on-site cafeteria would be another good choice.  They also usually offer good security and office furniture could be pushed out of the windows to crush approaching zombies, and the cafeteria is usually stocked to provide food for hundreds or thousands of office workers so food wouldn't be a problem for a long time. So there you have it, eleven things that don't make sense in The Walking Dead.  Have any of your own you'd like to add or were one of these things covered in the show?  Let me know in the comments.

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• Customer Engagement: Are Your Customers Engaged With Your Brands?

  - by Michael Snow

  Engaging Customers is Critical for Business Growth This week we'll be spending some time looking at Customer Engagement. We all have stories about how we try to engage our customers better than ever before.  We all know that successfully engaging customers is critical to an organization’s business success. We also know that engaging our customers is more challenging today than ever before. There is so much noise to compete with for getting anyone's attention. Over the last decade and a half we’ve watched as the online channel became a primary one for conducting our business and even managing our lives. And during this whole process or evolution, the customer journey has grown increasingly complex. Customers themselves have assumed increasing power and influence over the purchase process and for setting the tone and pace of the relationships they have with brands and you see the evidence of this in the really high expectations that customers have today. They expect brand experiences that are personalized and relevant -- In other words they want experiences that demonstrate that the brand understands their interests, preferences and past interactions with them. They also expect their experience with a brand and the community surrounding it to be social and interactive – it’s no longer acceptable to have a static, one-way dialogue with your customer base or to fail to connect your customers with fellow customers, or with your employees and partners. And on top of all this, customers expect us to deliver this rich and engaging, personalized and interactive experience, in a consistent way across a variety of channels including web, mobile and social channels or even offline venues such as in-store or via a call center. And as a result, we see that delivery on these expectations and successfully engaging your customers is a great challenge today. Customers expect a personal, engaging and consistent online customer experience. Today’s consumer expects to engage with your brand and the community surrounding it in an interactive and social way. Customers have come to expect a lot for the online customer experience.  ·        They expect it to be personal: o   Accessible:  - Regardless of my device  Via my existing online identities  o   Relevant:  Content that interests me  o   Customized:  To be able to tailor my online experience  ·        They expect it to be engaging: o   Social:  So I can share content with my social networks  o   Intuitive:  To easily find what I need   o   Interactive:  So I can interact with online communities And they expect it to be consistent across the online experience – so you better have your brand and information ducks in a row. These expectations are not only limited to your customers by any means. Your employees (and partners) are also expecting to be empowered with engagement tools across their internal and external communications and interactions with customers, partners and other employees. We had a great conversation with Ted Schadler from Forrester Research entitled: "Mobile is the New Face of Engagement" that is now available On-Demand. Take a look at all the webcasts available to watch from our Social Business Thought Leader Series. Social capabilities have become so pervasive and changed customers’ expectations for their online experiences. The days of one-direction communication with customers are at an end. Today’s customers expect to engage in a dialogue with your brand and the community surrounding it in an interactive and social way. You have at a very short window of opportunity to engage a customer before they go to another site in their pursuit of information, product, or services. In fact, customers who engage with brands via social media tend to spend more that customers who don’t, between 20% and 40% more.  And your customers are also increasingly influenced by their social networks too – 40% of consumers say they factor in Facebook recommendations when making purchasing decisions.  This means a few different things for today’s businesses. Incorporating forms of social interaction such as commenting or reviews as well as tightly integrating your online experience with your customers’ social networking experiences into the online customer experience are crucial for maintaining the eyeballs on your desired pages. --- Notes/Sources: 93% - Cone Finds that Americans Expect Companies to Have a Presence in Social Media - http://www.coneinc.com/content1182 40% of consumers factor in Facebook recommendations when making decisions about purchasing (Increasing Campaign Effectiveness with Social Media, Syncapse, March 2011) 20%-40% - Customers who engage with a company via social media spend this percentage more with that company than other customers (Source: Bain & Company Report – Putting Social Media to Work)

  Read the article

• Computer Networks UNISA - Chap 15 &ndash; Network Management

  - by MarkPearl

  After reading this section you should be able to Understand network management and the importance of documentation, baseline measurements, policies, and regulations to assess and maintain a network’s health. Manage a network’s performance using SNMP-based network management software, system and event logs, and traffic-shaping techniques Identify the reasons for and elements of an asset managements system Plan and follow regular hardware and software maintenance routines Fundamentals of Network Management Network management refers to the assessment, monitoring, and maintenance of all aspects of a network including checking for hardware faults, ensuring high QoS, maintaining records of network assets, etc. Scope of network management differs depending on the size and requirements of the network. All sub topics of network management share the goals of enhancing the efficiency and performance while preventing costly downtime or loss. Documentation The way documentation is stored may vary, but to adequately manage a network one should at least record the following… Physical topology (types of LAN and WAN topologies – ring, star, hybrid) Access method (does it use Ethernet 802.3, token ring, etc.) Protocols Devices (Switches, routers, etc) Operating Systems Applications Configurations (What version of operating system and config files for serve / client software) Baseline Measurements A baseline is a report of the network’s current state of operation. Baseline measurements might include the utilization rate for your network backbone, number of users logged on per day, etc. Baseline measurements allow you to compare future performance increases or decreases caused by network changes or events with past network performance. Obtaining baseline measurements is the only way to know for certain whether a pattern of usage has changed, or whether a network upgrade has made a difference. There are various tools available for measuring baseline performance on a network. Policies, Procedures, and Regulations Following rules helps limit chaos, confusion, and possibly downtime. The following policies and procedures and regulations make for sound network management. Media installations and management (includes designing physical layout of cable, etc.) Network addressing policies (includes choosing and applying a an addressing scheme) Resource sharing and naming conventions (includes rules for logon ID’s) Security related policies Troubleshooting procedures Backup and disaster recovery procedures In addition to internal policies, a network manager must consider external regulatory rules. Fault and Performance Management After documenting every aspect of your network and following policies and best practices, you are ready to asses you networks status on an on going basis. This process includes both performance management and fault management. Network Management Software To accomplish both fault and performance management, organizations often use enterprise-wide network management software. There various software packages that do this, each collect data from multiple networked devices at regular intervals, in a process called polling. Each managed device runs a network management agent. So as not to affect the performance of a device while collecting information, agents do not demand significant processing resources. The definition of a managed devices and their data are collected in a MIB (Management Information Base). Agents communicate information about managed devices via any of several application layer protocols. On modern networks most agents use SNMP which is part of the TCP/IP suite and typically runs over UDP on port 161. Because of the flexibility and sophisticated network management applications are a challenge to configure and fine-tune. One needs to be careful to only collect relevant information and not cause performance issues (i.e. pinging a device every 5 seconds can be a problem with thousands of devices). MRTG (Multi Router Traffic Grapher) is a simple command line utility that uses SNMP to poll devices and collects data in a log file. MRTG can be used with Windows, UNIX and Linux. System and Event Logs Virtually every condition recognized by an operating system can be recorded. This is typically done using event logs. In Windows there is a GUI event log viewer. Similar information is recorded in UNIX and Linux in a system log. Much of the information collected in event logs and syslog files does not point to a problem, even if it is marked with a warning so it is important to filter your logs appropriately to reduce the noise. Traffic Shaping When a network must handle high volumes of network traffic, users benefit from performance management technique called traffic shaping. Traffic shaping involves manipulating certain characteristics of packets, data streams, or connections to manage the type and amount of traffic traversing a network or interface at any moment. Its goals are to assure timely delivery of the most important traffic while offering the best possible performance for all users. Several types of traffic prioritization exist including prioritizing traffic according to any of the following characteristics… Protocol IP address User group DiffServr VLAN tag in a Data Link layer frame Service or application Caching In addition to traffic shaping, a network or host might use caching to improve performance. Caching is the local storage of frequently needed files that would otherwise be obtained from an external source. By keeping files close to the requester, caching allows the user to access those files quickly. The most common type of caching is Web caching, in which Web pages are stored locally. To an ISP, caching is much more than just convenience. It prevents a significant volume of WAN traffic, thus improving performance and saving money. Asset Management Another key component in managing networks is identifying and tracking its hardware. This is called asset management. The first step to asset management is to take an inventory of each node on the network. You will also want to keep records of every piece of software purchased by your organization. Asset management simplifies maintaining and upgrading the network chiefly because you know what the system includes. In addition, asset management provides network administrators with information about the costs and benefits of certain types of hardware or software. Change Management Networks are always in a stage of flux with various aspects including… Software changes and patches Client Upgrades Shared Application Upgrades NOS Upgrades Hardware and Physical Plant Changes Cabling Upgrades Backbone Upgrades For a detailed explanation on each of these read the textbook (Page 750 – 761)

  Read the article

• Computer Networks UNISA - Chap 14 &ndash; Insuring Integrity &amp; Availability

  - by MarkPearl

  After reading this section you should be able to Identify the characteristics of a network that keep data safe from loss or damage Protect an enterprise-wide network from viruses Explain network and system level fault tolerance techniques Discuss issues related to network backup and recovery strategies Describe the components of a useful disaster recovery plan and the options for disaster contingencies What are integrity and availability? Integrity – the soundness of a networks programs, data, services, devices, and connections Availability – How consistently and reliably a file or system can be accessed by authorized personnel A number of phenomena can compromise both integrity and availability including… security breaches natural disasters malicious intruders power flaws human error users etc Although you cannot predict every type of vulnerability, you can take measures to guard against the most damaging events. The following are some guidelines… Allow only network administrators to create or modify NOS and application system users. Monitor the network for unauthorized access or changes Record authorized system changes in a change management system’ Install redundant components Perform regular health checks on the network Check system performance, error logs, and the system log book regularly Keep backups Implement and enforce security and disaster recovery policies These are just some of the basics… Malware Malware refers to any program or piece of code designed to intrude upon or harm a system or its resources. Types of Malware… Boot sector viruses Macro viruses File infector viruses Worms Trojan Horse Network Viruses Bots Malware characteristics Some common characteristics of Malware include… Encryption Stealth Polymorphism Time dependence Malware Protection There are various tools available to protect you from malware called anti-malware software. These monitor your system for indications that a program is performing potential malware operations. A number of techniques are used to detect malware including… Signature Scanning Integrity Checking Monitoring unexpected file changes or virus like behaviours It is important to decide where anti-malware tools will be installed and find a balance between performance and protection. There are several general purpose malware policies that can be implemented to protect your network including… Every compute in an organization should be equipped with malware detection and cleaning software that regularly runs Users should not be allowed to alter or disable the anti-malware software Users should know what to do in case the anti-malware program detects a malware virus Users should be prohibited from installing any unauthorized software on their systems System wide alerts should be issued to network users notifying them if a serious malware virus has been detected. Fault Tolerance Besides guarding against malware, another key factor in maintaining the availability and integrity of data is fault tolerance. Fault tolerance is the ability for a system to continue performing despite an unexpected hardware or software malfunction. Fault tolerance can be realized in varying degrees, the optimal level of fault tolerance for a system depends on how critical its services and files are to productivity. Generally the more fault tolerant the system, the more expensive it is. The following describe some of the areas that need to be considered for fault tolerance. Environment (Temperature and humidity) Power Topology and Connectivity Servers Storage Power Typical power flaws include Surges – a brief increase in voltage due to lightening strikes, solar flares or some idiot at City Power Noise – Fluctuation in voltage levels caused by other devices on the network or electromagnetic interference Brownout – A sag in voltage for just a moment Blackout – A complete power loss The are various alternate power sources to consider including UPS’s and Generators. UPS’s are found in two categories… Standby UPS – provides continuous power when mains goes down (brief period of switching over) Online UPS – is online all the time and the device receives power from the UPS all the time (the UPS is charged continuously) Servers There are various techniques for fault tolerance with servers. Server mirroring is an option where one device or component duplicates the activities of another. It is generally an expensive process. Clustering is a fault tolerance technique that links multiple servers together to appear as a single server. They share processing and storage responsibilities and if one unit in the cluster goes down, another unit can be brought in to replace it. Storage There are various techniques available including the following… RAID Arrays NAS (Storage (Network Attached Storage) SANs (Storage Area Networks) Data Backup A backup is a copy of data or program files created for archiving or safekeeping. Many different options for backups exist with various media including… These vary in cost and speed. Optical Media Tape Backup External Disk Drives Network Backups Backup Strategy After selecting the appropriate tool for performing your servers backup, devise a backup strategy to guide you through performing reliable backups that provide maximum data protection. Questions that should be answered include… What data must be backed up At what time of day or night will the backups occur How will you verify the accuracy of the backups Where and for how long will backup media be stored Who will take responsibility for ensuring that backups occurred How long will you save backups Where will backup and recovery documentation be stored Different backup methods provide varying levels of certainty and corresponding labour cost. There are also different ways to determine which files should be backed up including… Full backup – all data on all servers is copied to storage media Incremental backup – Only data that has changed since the last full or incremental backup is copied to a storage medium Differential backup – Only data that has changed since the last backup is coped to a storage medium Disaster Recovery Disaster recovery is the process of restoring your critical functionality and data after an enterprise wide outage has occurred. A disaster recovery plan is for extreme scenarios (i.e. fire, line fault, etc). A cold site is a place were the computers, devices, and connectivity necessary to rebuild a network exist but they are not appropriately configured. A warm site is a place where the computers, devices, and connectivity necessary to rebuild a network exists with some appropriately configured devices. A hot site is a place where the computers, devices, and connectivity necessary to rebuild a network exists and all are appropriately configured.

  Read the article

• Agile Testing Days 2012 – My First Conference!

  - by Chris George

  I’d like to give you a bit of background first… so please bear with me! In 1996, whilst studying for my final year of my degree, I applied for a job as a C++ Developer at a small software house in Hertfordshire  After bodging up the technical part of the interview I didn’t get the job, but was offered a position as a QA Engineer instead. The role sounded intriguing and the pay was pretty good so in the absence of anything else I took it. Here began my career in the world of software testing! Back then, testing/QA was often an afterthought, something that was bolted on to the development process and very much a second class citizen. Test automation was rare, and tools were basic or non-existent! The internet was just starting to take off, and whilst there might have been testing communities and resources, we were certainly not exposed to any of them. After 8 years I moved to another small company, and again didn’t find myself exposed to any of the changes that were happening in the industry. It wasn’t until I joined Red Gate in 2008 that my view of testing and software development as a whole started to expand. But it took a further 4 years for my view of testing to be totally blown open, and so the story really begins… In May 2012 I was fortunate to land the role of Head of Test Engineering. Soon after, I received an email with details for the “Agile Testi However, in my new role, I decided that it was time to bite the bullet and at least go to one conference. Perhaps I could get some new ideas to supplement and support some of the ideas I already had.ng Days” conference in Potsdam, Germany. I looked over the suggested programme and some of the talks peeked my interest. For numerous reasons I’d shied away from attending conferences in the past, one of the main ones being that I didn’t see much benefit in attending loads of talks when I could just read about stuff like that on the internet. So, on the 18th November 2012, myself and three other Red Gaters boarded a plane at Heathrow bound for Potsdam, Germany to attend Agile Testing Days 2012. Tutorial Day – “Software Testing Reloaded” We chose to do the tutorials on the 19th, I chose the one titled “Software Testing Reloaded – So you wanna actually DO something? We’ve got just the workshop for you. Now with even less powerpoint!”. With such a concise and serious title I just had to see what it was about! I nervously entered the room to be greeted by tables, chairs etc all over the place, not set out and frankly in one hell of a mess! There were a few people in there playing a game with dice. Okaaaay… this is going to be a long day! Actually the dice game was an exercise in deduction and simplification… I found it very interesting and is certainly something I’ll be using at work as a training exercise! (I won’t explain the game here cause I don’t want to let the cat out of the bag…) The tutorial consisted of several games, exploring different aspects of testing. They were all practical yet required a fair amount of thin king. Matt Heusser and Pete Walen were running the tutorial, and presented it in a very relaxed and light-hearted manner. It was really my first experience of working in small teams with testers from very different backgrounds, and it was really enjoyable. Matt & Pete were very approachable and offered advice where required whilst still making you work for the answers! One of the tasks was to devise several strategies for testing some electronic dice. The premise was that a Vegas casino wanted to use the dice to appeal to the twenty-somethings interested in tech, but needed assurance that they were as reliable and random as traditional dice. This was a very interesting and challenging exercise that forced us to challenge various assumptions, determine/clarify requirements but most of all it was frustrating because the dice made a very very irritating beeping noise. Multiple that by at least 12 dice and I was dreaming about them all that night!! Some of the main takeaways that were brilliantly demonstrated through the games were not to make assumptions, challenge requirements, and have fun testing! The tutorial lasted the whole day, but to be honest the day went very quickly! My introduction into the conference experience started very well indeed, and I would talk to both Matt and Pete several times during the 4 days. Days 1,2 & 3 will be coming soon…  

  Read the article

• Namespaces are obsolete

  - by Bertrand Le Roy

  To those of us who have been around for a while, namespaces have been part of the landscape. One could even say that they have been defining the large-scale features of the landscape in question. However, something happened fairly recently that I think makes this venerable structure obsolete. Before I explain this development and why it’s a superior concept to namespaces, let me recapitulate what namespaces are and why they’ve been so good to us over the years… Namespaces are used for a few different things: Scope: a namespace delimits the portion of code where a name (for a class, sub-namespace, etc.) has the specified meaning. Namespaces are usually the highest-level scoping structures in a software package. Collision prevention: name collisions are a universal problem. Some systems, such as jQuery, wave it away, but the problem remains. Namespaces provide a reasonable approach to global uniqueness (and in some implementations such as XML, enforce it). In .NET, there are ways to relocate a namespace to avoid those rare collision cases. Hierarchy: programmers like neat little boxes, and especially boxes within boxes within boxes. For some reason. Regular human beings on the other hand, tend to think linearly, which is why the Windows explorer for example has tried in a few different ways to flatten the file system hierarchy for the user. 1 is clearly useful because we need to protect our code from bleeding effects from the rest of the application (and vice versa). A language with only global constructs may be what some of us started programming on, but it’s not desirable in any way today. 2 may not be always reasonably worth the trouble (jQuery is doing fine with its global plug-in namespace), but we still need it in many cases. One should note however that globally unique names are not the only possible implementation. In fact, they are a rather extreme solution. What we really care about is collision prevention within our application. What happens outside is irrelevant. 3 is, more than anything, an aesthetical choice. A common convention has been to encode the whole pedigree of the code into the namespace. Come to think about it, we never think we need to import “Microsoft.SqlServer.Management.Smo.Agent” and that would be very hard to remember. What we want to do is bring nHibernate into our app. And this is precisely what you’ll do with modern package managers and module loaders. I want to take the specific example of RequireJS, which is commonly used with Node. Here is how you import a module with RequireJS: var http = require("http"); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This is of course importing a HTTP stack module into the code. There is no noise here. Let’s break this down. Scope (1) is provided by the one scoping mechanism in JavaScript: the closure surrounding the module’s code. Whatever scoping mechanism is provided by the language would be fine here. Collision prevention (2) is very elegantly handled. Whereas relocating is an afterthought, and an exceptional measure with namespaces, it is here on the frontline. You always relocate, using an extremely familiar pattern: variable assignment. We are very much used to managing our local variable names and any possible collision will get solved very easily by picking a different name. Wait a minute, I hear some of you say. This is only taking care of collisions on the client-side, on the left of that assignment. What if I have two libraries with the name “http”? Well, You can better qualify the path to the module, which is what the require parameter really is. As for hierarchical organization, you don’t really want that, do you? RequireJS’ module pattern does elegantly cover the bases that namespaces used to cover, but it also promotes additional good practices. First, it promotes usage of self-contained, single responsibility units of code through the closure-based, stricter scoping mechanism. Namespaces are somewhat more porous, as using/import statements can be used bi-directionally, which leads us to my second point… Sane dependency graphs are easier to achieve and sustain with such a structure. With namespaces, it is easy to construct dependency cycles (that’s bad, mmkay?). With this pattern, the equivalent would be to build mega-components, which are an easier problem to spot than a decay into inter-dependent namespaces, for which you need specialized tools. I really like this pattern very much, and I would like to see more environments implement it. One could argue that dependency injection has some commonalities with this for example. What do you think? This is the half-baked result of some morning shower reflections, and I’d love to read your thoughts about it. What am I missing?

  Read the article

• Using Objective-C Blocks

  - by Sean

  Today I was experimenting with Objective-C's blocks so I thought I'd be clever and add to NSArray a few functional-style collection methods that I've seen in other languages: @interface NSArray (FunWithBlocks) - (NSArray *)collect:(id (^)(id obj))block; - (NSArray *)select:(BOOL (^)(id obj))block; - (NSArray *)flattenedArray; @end The collect: method takes a block which is called for each item in the array and expected to return the results of some operation using that item. The result is the collection of all of those results. (If the block returns nil, nothing is added to the result set.) The select: method will return a new array with only the items from the original that, when passed as an argument to the block, the block returned YES. And finally, the flattenedArray method iterates over the array's items. If an item is an array, it recursively calls flattenedArray on it and adds the results to the result set. If the item isn't an array, it adds the item to the result set. The result set is returned when everything is finished. So now that I had some infrastructure, I needed a test case. I decided to find all package files in the system's application directories. This is what I came up with: NSArray *packagePaths = [[[NSSearchPathForDirectoriesInDomains(NSAllApplicationsDirectory, NSAllDomainsMask, YES) collect:^(id path) { return (id)[[[NSFileManager defaultManager] contentsOfDirectoryAtPath:path error:nil] collect:^(id file) { return (id)[path stringByAppendingPathComponent:file]; }]; }] flattenedArray] select:^(id fullPath) { return [[NSWorkspace sharedWorkspace] isFilePackageAtPath:fullPath]; }]; Yep - that's all one line and it's horrid. I tried a few approaches at adding newlines and indentation to try to clean it up, but it still feels like the actual algorithm is lost in all the noise. I don't know if it's just a syntax thing or my relative in-experience with using a functional style that's the problem, though. For comparison, I decided to do it "the old fashioned way" and just use loops: NSMutableArray *packagePaths = [NSMutableArray new]; for (NSString *searchPath in NSSearchPathForDirectoriesInDomains(NSAllApplicationsDirectory, NSAllDomainsMask, YES)) { for (NSString *file in [[NSFileManager defaultManager] contentsOfDirectoryAtPath:searchPath error:nil]) { NSString *packagePath = [searchPath stringByAppendingPathComponent:file]; if ([[NSWorkspace sharedWorkspace] isFilePackageAtPath:packagePath]) { [packagePaths addObject:packagePath]; } } } IMO this version was easier to write and is more readable to boot. I suppose it's possible this was somehow a bad example, but it seems like a legitimate way to use blocks to me. (Am I wrong?) Am I missing something about how to write or structure Objective-C code with blocks that would clean this up and make it clearer than (or even just as clear as) the looped version?

  Read the article

• Running same powershell script multiple asynchronous times with separate runspace

  - by teqnomad

  Hi, I have a powershell script which is called by a batch script which is called by Trap Receiver (which also passes environment variables) (running on windows 2008). The traps are flushed out at times in sets of 2-4 trap events, and the batch script will echo the trap details for each message to a logfile, but the powershell script on the next line of the batch script will only appear to process the first trap message (the powershell script writes to the same logfile). My interpetation is that the defaultrunspace is common to all iterations of the script running and this is why the others appear to be ignored. I've tried adding "-sta" when I invoke the powershell script using "powershell.exe -command", but this didn't help. I've researched and found a method using C# but I don't know this language, and busy enough learning powershell, so hoping to find a more direct solution especially as interleaving a "wrapper" between batch and powershell will involve passing the environment variables. http://www.codeproject.com/KB/threads/AsyncPowerShell.aspx I've hunted through stackoverflow, and again the only question of similar vein was using C#. Any suggestions welcome. Some script background: The powershell script is actually a modification of a great script found at gregorystrike website - cant post the link as I'm limited to one link but its the one for Lefthand arrays. Lots of mods so it can do multiple targets from one .ini file, taking in the environment variables, and options to run portions of the script interactively with winform. But you can see the gist of the original script. The batch script is pretty basic. The keys things are I'm trying to filter out trap noise using the :~ operator, and I tried -sta option to see if this would compartmentalise the powershell script. set debug=off set CMD_LINE_ARGS="%*" set LHIPAddress="%2" set VARBIND8="%8" shift shift shift shift shift shift shift set CHASSIS="%9" echo %DATE% %TIME% "Trap Received: %LHIPAddress% %CHASSIS% %VARBIND8%" >> C:\Logs\trap_out.txt set ACTION="%VARBIND8:~39,18%" echo %DATE% %TIME% "Action substring is %ACTION%" 2>&1 >> C:\Logs\trap_out.txt if %ACTION%=="Remote Copy Volume" ( echo Prepostlefthand_env_v2.9 >> C:\Logs\trap_out.txt c:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe -sta -executionpolicy unrestricted -command " & 'C:\Scripts\prepostlefthand_env_v2.9.ps1' Backupsettings.ini ALL" 2>&1 >> C:\Logs\trap_out.txt ) ELSE ( echo %DATE% %TIME% Action substring is %ACTION% so exiting" 2>&1 >> C:\Logs\trap.out.txt ) exit

  Read the article

• do I need to close an audio Clip?

  - by Michael

  have an application that processes real-time data and is supposed to beep when a certain event occurs. The triggering event can occur multiple times per second, and if the beep is already playing when another event triggers the code is just supposed to ignore it (as opposed to interrupting the current beep and starting a new one). Here is the basic code: Clip clickClip public void prepareProcess() { super.prepareProcess(); clickClip = null; try { clipFile = new File("C:/WINDOWS/Media/CHIMES.wav"); ais = AudioSystem.getAudioInputStream(clipFile); clickClip = AudioSystem.getClip(); clickClip.open(ais); fileIsLoaded = true; } catch (Exception ex) { clickClip = null; fileIsLoaded = false; } } public void playSound() { if (fileIsLoaded) { if ((clickClip==null) || (!clickClip.isRunning())) { try { clickClip.setFramePosition(0); clickClip.start(); } catch (Exception ex) { System.out.println("Cannot play click noise"); ex.printStackTrace(); } } } The prepareProcess method gets run once in the beginning, and the playSound method is called every time a triggering event occurs. My question is: do I need to close the clickClip object? I know I could add an actionListener to monitor for a Stop event, but since the event occurs so frequently I'm worried the extra processing is going to slow down the real-time data collection. The code seems to run fine, but my worry is memory leaks. The code above is based on an example I found while searching the net, but the example used an actionListener to close the Clip specifically "to eliminate memory leaks that would occur when the stop method wasn't implemented". My program is intended to run for hours so any memory leaks I have will cause problems. I'll be honest: I have no idea how to verify whether or not I've got a problem. I'm using Netbeans, and running the memory profiler just gave me a huge list of things that I don't know how to read. This is supposed to be the simple part of the program, and I'm spending hours on it. Any help would be greatly appreciated! Michael

  Read the article

• Programming a callback function within a jQuery plugin

  - by ILMV

  I'm writing a jQuery plug-in so I can reuse this code in many places as it is a very well used piece of code, the code itself adds a new line to a table which has been cloned from a hidden row, it continues to perform a load of manipulations on the new row. I'm currently referencing it like this: $(".abc .grid").grid(); But I want to include a callback so each area the plug-in is called from can do something a bit more unique when the row has been added. I've used the jQuery AJAX plug-in before, so have used the success callback function, but cannot understand how the code works in the background. Here's what I want to achieve: $(".abc .grid").grid({ row_added: function() { // do something a bit more specific here } }); Here's my plug-in code (function($){ $.fn.extend({ //pass the options variable to the function grid: function() { return this.each(function() { grid_table=$(this).find('.grid-table > tbody'); grid_hidden_row=$(this).find('.grid-hidden-row'); //console.debug(grid_hidden_row); $(this).find('.grid-add-row').click(function(event) { /* * clone row takes a hidden dummy row, clones it and appends a unique row * identifier to the id. Clone maintains our jQuery binds */ // get the last id last_row=$(grid_table).find('tr:last').attr('id'); if(last_row===undefined) { new_row=1; } else { new_row=parseInt(last_row.replace('row',''),10)+1; } // append element to target, changes it's id and shows it $(grid_table).append($(grid_hidden_row).clone(true).attr('id','row'+new_row).removeClass('grid-hidden-row').show()); // append unique row identifier on id and name attribute of seledct, input and a $('#row'+new_row).find('select, input, a').each(function(id) { $(this).appendAttr('id','_row'+new_row); $(this).replaceAttr('name','_REPLACE_',new_row); }); // disable all the readonly_if_lines options if this is the first row if(new_row==1) { $('.readonly_if_lines :not(:selected)').attr('disabled','disabled'); } }); $(this).find('.grid-remove-row').click(function(event) { /* * Remove row does what it says on the tin, as well as a few other house * keeping bits and pieces */ // remove the parent tr $(this).parents('tr').remove(); // recalculate the order value5 //calcTotal('.net_value ','#gridform','#gridform_total'); // if we've removed the last row remove readonly locks row_count=grid_table.find('tr').size(); console.info(row_count); if(row_count===0) { $('.readonly_if_lines :disabled').removeAttr('disabled'); } }); }); } }); })(jQuery); I've done the usually searching on elgooG... but I seem to be getting a lot of noise with little result, any help would be greatly appreciated. Thanks!

  Read the article

• C strange array behaviour

  - by LukeN

  After learning that both strncmp is not what it seems to be and strlcpy not being available on my operating system (Linux), I figured I could try and write it myself. I found a quote from Ulrich Drepper, the libc maintainer, who posted an alternative to strlcpy using mempcpy. I don't have mempcpy either, but it's behaviour was easy to replicate. First of, this is the testcase I have #include <stdio.h> #include <string.h> #define BSIZE 10 void insp(const char* s, int n) { int i; for (i = 0; i < n; i++) printf("%c ", s[i]); printf("\n"); for (i = 0; i < n; i++) printf("%02X ", s[i]); printf("\n"); return; } int copy_string(char *dest, const char *src, int n) { int r = strlen(memcpy(dest, src, n-1)); dest[r] = 0; return r; } int main() { char b[BSIZE]; memset(b, 0, BSIZE); printf("Buffer size is %d", BSIZE); insp(b, BSIZE); printf("\nFirst copy:\n"); copy_string(b, "First", BSIZE); insp(b, BSIZE); printf("b = '%s'\n", b); printf("\nSecond copy:\n"); copy_string(b, "Second", BSIZE); insp(b, BSIZE); printf("b = '%s'\n", b); return 0; } And this is its result: Buffer size is 10 00 00 00 00 00 00 00 00 00 00 First copy: F i r s t b = 46 69 72 73 74 00 62 20 3D 00 b = 'First' Second copy: S e c o n d 53 65 63 6F 6E 64 00 00 01 00 b = 'Second' You can see in the internal representation (the lines insp() created) that there's some noise mixed in, like the printf() format string in the inspection after the first copy, and a foreign 0x01 in the second copy. The strings are copied intact and it correctly handles too long source strings (let's ignore the possible issue with passing 0 as length to copy_string for now, I'll fix that later). But why are there foreign array contents (from the format string) inside my destination? It's as if the destination was actually RESIZED to match the new length.

  Read the article

• Lighttpd + fastcgi + python (for django) slow on first request

  - by EagleOne

  I'm having a problem with a django website I host with lighttpd + fastcgi. It works great but it seems that the first request always takes up to 3seconds. Subsequent requests are much faster (<1s). I activated access logs in lighttpd in order to track the issue. But I'm kind of stuck. Here are logs where I 'lose' 4s (from 10:04:17 to 10:04:21): 2012-12-01 10:04:17: (mod_fastcgi.c.3636) handling it in mod_fastcgi 2012-12-01 10:04:17: (response.c.470) -- before doc_root 2012-12-01 10:04:17: (response.c.471) Doc-Root : /var/www 2012-12-01 10:04:17: (response.c.472) Rel-Path : /finderauto.fcgi 2012-12-01 10:04:17: (response.c.473) Path : 2012-12-01 10:04:17: (response.c.521) -- after doc_root 2012-12-01 10:04:17: (response.c.522) Doc-Root : /var/www 2012-12-01 10:04:17: (response.c.523) Rel-Path : /finderauto.fcgi 2012-12-01 10:04:17: (response.c.524) Path : /var/www/finderauto.fcgi 2012-12-01 10:04:17: (response.c.541) -- logical -> physical 2012-12-01 10:04:17: (response.c.542) Doc-Root : /var/www 2012-12-01 10:04:17: (response.c.543) Rel-Path : /finderauto.fcgi 2012-12-01 10:04:17: (response.c.544) Path : /var/www/finderauto.fcgi 2012-12-01 10:04:21: (response.c.128) Response-Header: HTTP/1.1 200 OK Last-Modified: Sat, 01 Dec 2012 09:04:21 GMT Expires: Sat, 01 Dec 2012 09:14:21 GMT Content-Type: text/html; charset=utf-8 Cache-Control: max-age=600 Transfer-Encoding: chunked Date: Sat, 01 Dec 2012 09:04:21 GMT Server: lighttpd/1.4.28 I guess that if there is a problem, it's whith my configuration. So here is the way I launch my django app: python manage.py runfcgi method=threaded host=127.0.0.1 port=3033 And here is my lighttpd conf: server.modules = ( "mod_access", "mod_alias", "mod_compress", "mod_redirect", "mod_rewrite", "mod_fastcgi", "mod_accesslog", ) server.document-root = "/var/www" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/var/log/lighttpd/error.log" server.pid-file = "/var/run/lighttpd.pid" server.username = "www-data" server.groupname = "www-data" accesslog.filename = "/var/log/lighttpd/access.log" debug.log-request-header = "enable" debug.log-response-header = "enable" debug.log-file-not-found = "enable" debug.log-request-handling = "enable" debug.log-timeouts = "enable" debug.log-ssl-noise = "enable" debug.log-condition-cache-handling = "enable" debug.log-condition-handling = "enable" fastcgi.server = ( "/finderauto.fcgi" => ( "main" => ( # Use host / port instead of socket for TCP fastcgi "host" => "127.0.0.1", "port" => 3033, #"socket" => "/home/finderadmin/finderauto.sock", "check-local" => "disable", "fix-root-scriptname" => "enable", ) ), ) alias.url = ( "/media" => "/home/user/django/contrib/admin/media/", ) url.rewrite-once = ( "^(/media.*)$" => "$1", "^/favicon\.ico$" => "/media/favicon.ico", "^(/.*)$" => "/finderauto.fcgi$1", ) index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", " index.lighttpd.html" ) url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ## Use ipv6 if available #include_shell "/usr/share/lighttpd/use-ipv6.pl" dir-listing.encoding = "utf-8" server.dir-listing = "enable" compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ( "application/x-javascript", "text/css", "text/html", "text/plain" ) include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" If any of you could help me finding out where I lose these 3 or 4 s. I would much appreciate. Thanks in advance!

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31  | Next Page >