Search Results

Search found 740 results on 30 pages for 'snake eyes'.

Page 28/30 | < Previous Page | 24 25 26 27 28 29 30  | Next Page >

• HDMI video connection cuts top and bottom borders of screen

  - by Luis Alvarado

  Ok this is an extension of another problem I had with a VGA connection and an Nvidia Geforce GT 440 card. Here is goes the explanation of this particular problem: I have a Soneview 32' TV. This TV has many connections including VGA (First reason I bought it), HDMI (Second reason but did not have a HDMI cable at that time) and DVI. I have had this TV for little over a month now, actually I had it to celebrate the release of Ubuntu 11.10 and started using it exactly on that date (I know too much fan there but hey, I like geek stuff). I started using it with the VGA cable. After 2 weeks I bought an Nvidia GT440 card. The previous 9500GT was working correctly with no problems whatsoever. I installed the GT440 and the first problem that I encountered using this latest card is mentioned here: Nvidia GT 440 black screen problem when loading lightdm greeter. The solution to this problem was to actually disconnect then connect again the VGA cable. This would result in the screen showing me the lightdm screen for my login. If I did not disconnect then connect the cable I could be there forever thinking that there is no video signal. I got tired of looking for answers that did not work and for solutions that made me literally have to install Ubuntu again. I just went and bought a HDMI cable and changed the VGA one for that one. It worked and I did not have to disconnect/connect the cable but now I have this problem when using any resolution. My normal resolution is 1920x1080 (This TV is 1080HD) so in VGA I could use this resolution with no problem, but on HDMI am getting the borders cut out. Here is a pic: As you can see from the PIC, the Launcher icons only show less than 50% of their witdh. Forget about the top and bottom parts, I can access them with the mouse but I can not visualize them in the screen. It is like it's outside of the TVs view. Basically there is like 20 to 30 pixels gone from all sides. I searched around and came to running xrand --verbose to see what it could detect from the TV. I got this: cyrex@cyrex:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 175, current 1920 x 1080, maximum 1920 x 1080 default connected 1920x1080+0+0 (0x164) normal (normal) 0mm x 0mm Identifier: 0x163 Timestamp: 465485 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1920x1080 (0x164) 103.7MHz *current h: width 1920 start 0 end 0 total 1920 skew 0 clock 54.0KHz v: height 1080 start 0 end 0 total 1080 clock 50.0Hz 1920x1080 (0x165) 105.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 55.1KHz v: height 1080 start 0 end 0 total 1080 clock 51.0Hz 1920x1080 (0x166) 107.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 56.2KHz v: height 1080 start 0 end 0 total 1080 clock 52.0Hz 1920x1080 (0x167) 109.9MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 57.2KHz v: height 1080 start 0 end 0 total 1080 clock 53.0Hz 1920x1080 (0x168) 112.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 58.3KHz v: height 1080 start 0 end 0 total 1080 clock 54.0Hz 1920x1080 (0x169) 114.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 59.4KHz v: height 1080 start 0 end 0 total 1080 clock 55.0Hz 1680x1050 (0x16a) 98.8MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 58.8KHz v: height 1050 start 0 end 0 total 1050 clock 56.0Hz 1680x1050 (0x16b) 100.5MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 59.9KHz v: height 1050 start 0 end 0 total 1050 clock 57.0Hz 1600x1024 (0x16c) 95.0MHz h: width 1600 start 0 end 0 total 1600 skew 0 clock 59.4KHz v: height 1024 start 0 end 0 total 1024 clock 58.0Hz 1440x900 (0x16d) 76.5MHz h: width 1440 start 0 end 0 total 1440 skew 0 clock 53.1KHz v: height 900 start 0 end 0 total 900 clock 59.0Hz 1360x768 (0x171) 65.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 48.4KHz v: height 768 start 0 end 0 total 768 clock 63.0Hz 1360x768 (0x172) 66.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 49.2KHz v: height 768 start 0 end 0 total 768 clock 64.0Hz 1280x1024 (0x173) 85.2MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.6KHz v: height 1024 start 0 end 0 total 1024 clock 65.0Hz 1280x960 (0x176) 83.6MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 65.3KHz v: height 960 start 0 end 0 total 960 clock 68.0Hz 1280x960 (0x177) 84.8MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.2KHz v: height 960 start 0 end 0 total 960 clock 69.0Hz 1280x720 (0x178) 64.5MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 50.4KHz v: height 720 start 0 end 0 total 720 clock 70.0Hz 1280x720 (0x179) 65.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.1KHz v: height 720 start 0 end 0 total 720 clock 71.0Hz 1280x720 (0x17a) 66.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.8KHz v: height 720 start 0 end 0 total 720 clock 72.0Hz 1152x864 (0x17b) 72.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.1KHz v: height 864 start 0 end 0 total 864 clock 73.0Hz 1152x864 (0x17c) 73.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.9KHz v: height 864 start 0 end 0 total 864 clock 74.0Hz ....Many Resolutions later... 320x200 (0x1d1) 10.2MHz h: width 320 start 0 end 0 total 320 skew 0 clock 31.8KHz v: height 200 start 0 end 0 total 200 clock 159.0Hz 320x175 (0x1d2) 9.0MHz h: width 320 start 0 end 0 total 320 skew 0 clock 28.0KHz v: height 175 start 0 end 0 total 175 clock 160.0Hz 1920x1080 (0x1dd) 333.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 173.9KHz v: height 1080 start 0 end 0 total 1080 clock 161.0Hz If it helps, the Refresh Rate at 1920x1080 is 60. There is a flickering effect at this resolution using HDMI but not VGA which I imagine is related to the borders cut off issue am asking here. I have also done the following but this will only solve the problem on lower resolutions than 1920x1080 or on others TV (My father has a Sony TV where this problem is also solved): NVIDIA WAY Go to Nvidia-Settings and there will be an option that will have more features if a HDMI cable is connected. In the next pic the option is DFP-1 (CNDLCD) but this name changes depending on what device the PC is connected to: Uncheck Force Full GPU Scaling What this will do for resolutions LOWER than 1920x1080 (At least in my case) is solve the flickering problem and fix the borders cut by the monitor. Save to Xorg.conf file the changes made after changing to a resolution acceptable to your eyes. TV WAY If you TV has OSD Menu and this menu has options for scanning the screen resolution or auto adjusting to it, disable them. Specifically the option about SCAN. If you have an option for AV Mode disable it. Basically disable any option that needs to scan and scale the resolution. Test one by one. In the case of my father's TV this did it. In my case, the Nvidia solved it for lower resolutions. NOTE: In the case this is not solved in the next couple of weeks I will add this as the answer but take into consideration that the issue is still active with 1920x1080 resolutions.

  Read the article

• The hidden cost of interrupting knowledge workers

  - by Piet

  The November issue of pragpub has an interesting article on interruptions. The article is written by Brian Tarbox, who also mentions the article on his blog. I like the subtitle: ‘Simple Strategies for Avoiding Dumping Your Mental Stack’. Brian talks about the effective cost of interrupting a ‘knowledge worker’, often with trivial questions or distractions. In the eyes of the interruptor, the interruption only costs the time the interrupted had to listen to the question and give an answer. However, depending on what the interrupted was doing at the time, getting fully immersed in their task again might take up to 15-20 minutes. Enough interruptions might even cause a knowledge worker to mentally call it a day. According to this article interruptions can consume about 28% of a knowledge worker’s time, translating in a $588 billion loss for US companies each year. Looking for a new developer to join your team? Ever thought about optimizing your team’s environment and the way they work instead? Making non knowledge workers aware You can’t. Well, I haven’t succeeded yet. And believe me: I’ve tried. When you’ve got a simple way to really increase your productivity (’give me 2 hours of uninterrupted time a day’) it wouldn’t be right not to tell your boss or team-leader about it. The problem is: only productive knowledge workers seem to understand this. People who don’t fall into this category just seem to think you’re joking, being arrogant or anti-social when you tell them the interruptions can really have an impact on your productivity. Also, knowledge workers often work in a very concentrated mental state which is described here as: It is the same mindfulness as ecstatic lovemaking, the merging of two into a fluidly harmonious one. The hallmark of flow is a feeling of spontaneous joy, even rapture, while performing a task. Yes, coding can be addictive and if you’re interrupting a programmer at the wrong moment, you’re effectively bringing down a junkie from his high in just a few seconds. This can result in seemingly arrogant, almost aggressive reactions. How to make people aware of the production-cost they’re inflicting: I’ve been often pondering that question myself. The article suggests that solutions based on that question never seem to work. To be honest: I’ve never even been able to find a half decent solution for this question. People who are not in this situations just don’t understand the issue, no matter how you try to explain it. Fun (?) thing I’ve noticed: Programmers or IT people in general who don’t get this are often the kind of people who just don’t get anything done. Interrupt handling (interruption management?) IRL Have non-urgent questions handled in a non-interruptive way It helps a bit to educate people into using non-interruptive ways to ask questions: “duh, I have no idea, but I’m a bit busy here now could you put it in an email so I don’t forget?”. Eventually, a considerable amount of people will skip interrupting you and just send an email right away. Some stubborn-headed people however will continue to just interrupt you, saying “you’re 10 meters from my desk, why can’t we just talk?”. Just remember to disable your email notifications, it can be hard to resist opening your email client when you know a new email just arrived. Use Do Not Disturb signals When working in a group of programmers, often the unofficial sign you can only be interrupted for something important is to put on headphones. And when the environment is quiet enough, often people aren’t even listening to music. Otherwise music can help to block the indirect distractions (someone else talking on the phone or tapping their feet). You might get a “they’re all just surfing and listening to music”-reaction from outsiders though. Peopleware talks about a team where the no-interruption sign was placing a shawl on the desk. If I remember correctly, I am unable to locate my copy of this really excellent must-read book. If you have all standardized on the same IM tool, maybe that tool has a ‘do not disturb’ setting. Also some phone-systems have a ‘DND’ (do not disturb) setting. Hide Brian offers a number of good suggestions, some obvious like: hide away somewhere they can’t find you. Not sure how long it’ll be till someone thinks you’re just taking a nap somewhere though. Also, this often isn’t possible or your boss might not understand this. And if you really get caught taking a nap, make sure to explain that your were powernapping. Counter-act interruptions Another suggestion he offers is when you’re being interrupted to just hold up your hand, blocking the interruption, and at least giving you time to finish your sentence or your block/line of code. The last suggestion works more as a way to make it obvious to the interruptor that they really are interrupting your work and to offload some of the cost on the interruptor. In practice, this can also helps you cool down a bit so you don’t start saying nasty things to the interruptor. Unfortunately I’ve sometimes been confronted with people who just ignore this signal and keep talking, as if they’re sure that whatever they’ve got to say is really worth listening to and without a doubt more important than anything you might be doing. This behaviour usually leaves me speechless (not good when someone just asked a question). I’ve noticed that these people are usually also the first to complain when being interrupted themselves. They’re generally not very liked as colleagues, so try not to imitate their behaviour. TDD as a way to minimize recovery time I don’t like Test Driven Development. Mainly for only one reason: It interrupts flow. At least, that’s what it does for me, but maybe I’m just not grown used to TDD yet. BUT a positive effect TDD has on me when I have to work in an interruptive environment and can’t really get into the ‘flow’ (also supposedly called ‘the zone’ by software developers, although I’ve never heard it 1st hand), TDD helps me to concentrate on the tasks at hand and helps me to get back at work after an interruption. I feel when using TDD, I can get by without the need for being totally ‘in’ the project and I can be reasonably productive without obtaining ‘flow’. Do you have a suggestion on how to make people aware of the concept of ‘flow’ and the cost of interruptions? (without looking like an arrogant ass or a weirdo)

  Read the article

• Developer’s Life – Disaster Lessons – Notes from the Field #039

  - by Pinal Dave

  [Note from Pinal]: This is a 39th episode of Notes from the Field series. What is the best solution do you have when you encounter a disaster in your organization. Now many of you would answer that in this scenario you would have another standby machine or alternative which you will plug in. Now let me ask second question – What would you do if you as an individual faces disaster?  In this episode of the Notes from the Field series database expert Mike Walsh explains a very crucial issue we face in our career, which is not technical but more to relate to human nature. Read on this may be the best blog post you might read in recent times. Howdy! When it was my turn to share the Notes from the Field last time, I took a departure from my normal technical content to talk about Attitude and Communication.(http://blog.sqlauthority.com/2014/05/08/developers-life-attitude-and-communication-they-can-cause-problems-notes-from-the-field-027/) Pinal said it was a popular topic so I hope he won’t mind if I stick with Professional Development for another of my turns at sharing some information here. Like I said last time, the “soft skills” of the IT world are often just as important – sometimes more important – than the technical skills. As a consultant with Linchpin People – I see so many situations where the professional skills I’ve gained and use are more valuable to clients than knowing the best way to tune a query. Today I want to continue talking about professional development and tell you about the way I almost got myself hit by a train – and why that matters in our day jobs. Sometimes we can learn a lot from disasters. Whether we caused them or someone else did. If you are interested in learning about some of my observations in these lessons you can see more where I talk about lessons from disasters on my blog. For now, though, onto how I almost got my vehicle hit by a train… The Train Crash That Almost Was…. My family and I own a little schoolhouse building about a 10 mile drive away from our house. We use it as a free resource for families in the area that homeschool their children – so they can have some class space. I go up there a lot to check in on the property, to take care of the trash and to do work on the property. On the way there, there is a very small Stop Sign controlled railroad intersection. There is only two small freight trains a day passing there. Actually the same train, making a journey south and then back North. That’s it. This road is a small rural road, barely ever a second car driving in the neighborhood there when I am. The stop sign is pretty much there only for the train crossing. When we first bought the building, I was up there a lot doing renovations on the property. Being familiar with the area, I am also familiar with the train schedule and know the tracks are normally free of trains. So I developed a bad habit. You see, I’d approach the stop sign and slow down as I roll through it. Sometimes I’d do a quick look and come to an “almost” stop there but keep on going. I let my impatience and complacency take over. And that is because most of the time I was going there long after the train was done for the day or in between the runs. This habit became pretty well established after a couple years of driving the route. The behavior reinforced a bit by the success ratio. I saw others doing it as well from the neighborhood when I would happen to be there around the time another car was there. Well. You already know where this ends up by the title and backstory here. A few months ago I came to that little crossing, and I started to do the normal routine. I’d pretty much stopped looking in some respects because of the pattern I’d gotten into.  For some reason I looked and heard and saw the train slowly approaching and slammed on my brakes and stopped. It was an abrupt stop, and it was close. I probably would have made it okay, but I sat there thinking about lessons for IT professionals from the situation once I started breathing again and watched the cars loaded with sand and propane slowly labored down the tracks… Here are Those Lessons… It’s easy to get stuck into a routine – That isn’t always bad. Except when it’s a bad routine. Momentum and inertia are powerful. Once you have a habit and a routine developed – it’s really hard to break that. Make sure you are setting the right routines and habits TODAY. What almost dangerous things are you doing today? How are you almost messing up your production environment today? Stop doing that. Be Deliberate – (Even when you are the only one) – Like I said – a lot of people roll through that stop sign. Perhaps the neighbors or other drivers think “why is he fully stopping and looking… The train only comes two times a day!” – they can think that all they want. Through deliberate actions and forcing myself to pay attention, I will avoid that oops again. Slow down. Take a deep breath. Be Deliberate in your job. Pay attention to the small stuff and go out of your way to be careful. It will save you later. Be Observant – Keep your eyes open. By looking around, observing the situation and understanding what your servers, databases, users and vendors are doing – you’ll notice when something is out of place. But if you don’t know what is normal, if you don’t look to make sure nothing has changed – that train will come and get you. Where can you be more observant? What warning signs are you ignoring in your environment today? In the IT world – trains are everywhere. Projects move fast. Decisions happen fast. Problems turn from a warning sign to a disaster quickly. If you get stuck in a complacent pattern of “Everything is okay, it always has been and always will be” – that’s the time that you will most likely get stuck in a bad situation. Don’t let yourself get complacent, don’t let your team get complacent. That will lead to being proactive. And a proactive environment spends less money on consultants for troubleshooting problems you should have seen ahead of time. You can spend your money and IT budget on improving for your customers. If you want to get started with performance analytics and triage of virtualized SQL Servers with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• When OneTug Just Isn&rsquo;t Enough&hellip;

  - by onefloridacoder

  I stole that from the back of a T-shirt I saw at the Orlando Code Camp 2010.  This was my first code camp and my first time volunteering for an event like this as well.  It was an awesome day.  I cannot begin to count the “aaahh”, “I did-not-know I could do that”, in the crowds and for myself.  I think it was a great day of learning for everyone at all levels.  All of the presenters were different and provided great insights into the topics they were presenting.  Here’s a list of the ones that I attended. KodeFuGuru, “Pirates vs. Ninjas” He touched on many good topics to relax some of the ways we think when we are writing out code, and still looks good, readable, etc.  As he pointed out in all of his examples, we might not always realize everything that’s going on under the covers.  He exposed a bug in his own code, and verbalized the mental gymnastics he went through when he knew there was something wrong with one of his IEnumerable implementations.  For me, it was great to hear that someone else labors over these gut reactions to code quickly snapped together, to the point that we rush to the refactor stage to fix what’s bothering us – and learn.  He has some content on extension methods that was very interesting.  My “that is so cool” moment was when he swapped out AddEntity method on an entity class and used a With extension method instead.  Some of the LINQ scales fell off my eyes at that moment, and I realized my own code could be a lot more powerful (and readable) if incorporate a few of these examples at the appropriate times.  And he cautioned as well… “don’t go crazy with this stuff”, there’s a place and time for everything.  One of his examples demo’d toward the end of the talk is on his sight where he’s chaining methods together, cool stuff. Quotes I liked: “Extension Methods - Extension methods to put features back on the model type, without impacting the type.” “Favor Declarative Code” – Check out the ? and ?? operators if you’re not already using them. “Favor Fluent Code” “Avoid Pirate Ninja Zombies!  If you see one run!” I’m definitely going to be looking at “Extract Projection” when I get into VS2010. BDD 101 – Sean Chambers http://github.com/schambers This guy had a whole host of gremlins against him, final score Sean 5, Gremlins 1.  He ran the code samples from his github repo  in the code github code viewer since the PC they school gave him to use didn’t have VS installed. He did a great job of converting the grammar between BDD and TDD, and how this style of development can be used in integration tests as well as the different types of gated builds on a CI box – he didn’t go into a discussion around CI, but we could infer that it could work. Like when we use WSSF, it does cause a class explosion to happen however the amount of code per class it limit to just covering the concern at hand – no more, no less.  As in “When I as a <Role>, expect {something} to happen, because {}”  This keeps us (the developer) from gold plating our solutions and creating less waste.  He basically keeps the code that prove out the requirement to two lines of code.  Nice. He uses SpecUnit to merge this grammar into his .NET projects and gave an overview on how this ties into writing his own BDD tests.  Some folks were familiar with Given / When / Then as story acceptance criteria and here’s how he mapped it: “Given <Context>  When <Something Happens> Then <I expect...>”  There are a few base classes and overrides in the SpecUnit framework that help with setting up the context for each test which looked very handy. Successfully Running Your Own Coding Business The speaker ran through a list of items that sounded like common sense stuff LLC, banking, separating expenses, etc.  Then moved into role playing with business owners and an ISV.  That was pretty good stuff, it pays to be a good listener all of the time even if your client is sitting on the other side of the phone tearing you head off for you – but that’s all it is, and get used to it its par for the course.  Oh, yeah always answer the phone was one simple thing that you can do to move  your business forward.  But like Cory Foy tweeted this week, “If you owe me a lot of money, don’t have a message that says your away for five weeks skiing in Colorado.”  Lots of food for thought that’s on my list of “todo’s and to-don’ts”. Speaker Idol Next, I had the pleasure of helping Russ Fustino tape this part of Code Camp as my primary volunteer opportunity that day.  You remember Russ, “know the code” from the awesome Russ’ Tool Shed series.  He did a great job orchestrating and capturing the Speaker Idol finals.   So I didn’t actually miss any sessions, but was able to see three back to back in one setting.  The idol finalists gave a 10 minute talk and very deep subjects, but different styles of talks.  No one walked away empty handed for jobs very well done.  Russ has details on his site.  The pictures and  video captured is supposed to be published on Channel 9 at a later date.  It was also a valuable experience to see what makes technical speakers effective in their talks.  I picked up quite a few speaking tips from what I heard from the judges and contestants. Design For Developers – Diane Leeper If you are a great developer, you’re probably a lousy designer.  Diane didn’t come to poke holes in what we think we can do with UI layout and design, but she provided some tools we can use to figure out metaphors for visualizing data.  If you need help with that check out Silverlight Pivot – that’s what she was getting at.  I was first introduced to her at one of John Papa’s talks last year at a Lakeland User Group meeting and she’s very passionate about design.  She was able to discuss different elements of Pivot, while to a developer is just looked cool. I believe she was providing the deck from her talk to folks after her talk, so send her an email if you’re interested.   She says she can talk about design for hours and hours – we all left that session believing her.   Rinse and Repeat Orlando Code Camp 2010 was awesome, and would totally do it again.  There were lots of folks from my shop there, and some that have left my shop to go elsewhere.  So it was a reunion of sorts and a great celebration for the simple fact that its great to be a developer and there’s a community that supports and recognizes it as well.  The sponsors were generous and the organizers were very tired, namely Esteban Garcia and Will Strohl who were responsible for making a lot of this magic happen.  And if you don’t believe me, check out the chatter on Twitter.

  Read the article

• ASP.NET MVC 3 Hosting :: Rolling with Razor in MVC v3 Preview

  - by mbridge

  Razor is an alternate view engine for asp.net MVC.  It was introduced in the “WebMatrix” tool and has now been released as part of the asp.net MVC 3 preview 1.  Basically, Razor allows us to replace the clunky <% %> syntax with a much cleaner coding model, which integrates very nicely with HTML.  Additionally, it provides some really nice features for master page type scenarios and you don’t lose access to any of the features you are currently familiar with, such as HTML helper methods. First, download and install the ASP.NET MVC Preview 1.  You can find this at http://www.microsoft.com/downloads/details.aspx?FamilyID=cb42f741-8fb1-4f43-a5fa-812096f8d1e8&displaylang=en. Now, follow these steps to create your first asp.net mvc project using Razor: 1. Open Visual Studio 2010 2. Create a new project.  Select File->New->Project (Shift Control N) 3. You will see the list of project types which should look similar to what’s shown:   4. Select “ASP.NET MVC 3 Web Application (Razor).”  Set the application name to RazorTest and the path to c:projectsRazorTest for this tutorial. If you select accidently select ASPX, you will end up with the standard asp.net view engine and template, which isn’t what you want. 5. For this tutorial, and ONLY for this tutorial, select “No, do not create a unit test project.”  In general, you should create and use a unit test project.  Code without unit tests is kind of like diet ice cream.  It just isn’t very good. Now, once we have this done, our brand new project will be created.    In all likelihood, Visual Studio will leave you looking at the “HomeController.cs” class, as shown below: Immediately, you should notice one difference.  The Index action used to look like: public ActionResult Index () { ViewData[“Message”] = “Welcome to ASP.Net MVC!”; Return View(); } While this will still compile and run just fine, ASP.Net MVC 3 has a much nicer way of doing this: public ActionResult Index() { ViewModel.Message = “Welcome to ASP.Net MVC!”; Return View(); } Instead of using ViewData we are using the new ViewModel object, which uses the new dynamic data typing of .Net 4.0 to allow us to express ourselves much more cleanly.  This isn’t a tutorial on ALL of MVC 3, but the ViewModel concept is one we will need as we dig into Razor. What comes in the box? When we create a project using the ASP.Net MVC 3 Template with Razor, we get a standard project setup, just like we did in ASP.NET MVC 2.0 but with some differences.  Instead of seeing “.aspx” view files and “.ascx” files, we see files with the “.cshtml” which is the default razor extension.  Before we discuss the details of a razor file, one thing to keep in mind is that since this is an extremely early preview, intellisense is not currently enabled with the razor view engine.  This is promised as an updated before the final release.  Just like with the aspx view engine, the convention of the folder name for a set of views matching the controller name without the word “Controller” still stands.  Similarly, each action in the controller will usually have a corresponding view file in the appropriate view directory.  Remember, in asp.net MVC, convention over configuration is key to successful development! The initial template organizes views in the following folders, located in the project under Views: - Account – The default account management views used by the Account controller.  Each file represents a distinct view. - Home – Views corresponding to the appropriate actions within the home controller. - Shared – This contains common view objects used by multiple views.  Within here, master pages are stored, as well as partial page views (user controls).  By convention, these partial views are named “_XXXPartial.cshtml” where XXX is the appropriate name, such as _LogonPartial.cshtml.  Additionally, display templates are stored under here. With this in mind, let us take a look at the index.cshtml file under the home view directory.  When you open up index.cshtml you should see 1:   @inherits System.Web.Mvc.WebViewPage 2:  @{ 3:          View.Title = "Home Page"; 4:       LayoutPage = "~/Views/Shared/_Layout.cshtml"; 5:   } 6:  <h2>@View.Message</h2> 7:  <p> 8:     To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC     9:    Website">http://asp.net/mvc</a>. 10:  </p> So looking through this, we observe the following facts: Line 1 imports the base page that all views (using Razor) are based on, which is System.Web.Mvc.WebViewPage.  Note that this is different than System.Web.MVC.ViewPage which is used by asp.net MVC 2.0 Also note that instead of the <% %> syntax, we use the very simple ‘@’ sign.  The View Engine contains enough context sensitive logic that it can even distinguish between @ in code and @ in an email.  It’s a very clean markup.  Line 2 introduces the idea of a code block in razor.  A code block is a scoping mechanism just like it is in a normal C# class.  It is designated by @{… }  and any C# code can be placed in between.  Note that this is all server side code just like it is when using the aspx engine and <% %>.  Line 3 allows us to set the page title in the client page’s file.  This is a new feature which I’ll talk more about when we get to master pages, but it is another of the nice things razor brings to asp.net mvc development. Line 4 is where we specify our “master” page, but as you can see, you can place it almost anywhere you want, because you tell it where it is located.  A Layout Page is similar to a master page, but it gains a bit when it comes to flexibility.  Again, we’ll come back to this in a later installment.  Line 6 and beyond is where we display the contents of our view.  No more using <%: %> intermixed with code.  Instead, we get to use very clean syntax such as @View.Message.  This is a lot easier to read than <%:@View.Message%> especially when intermixed with html.  For example: <p> My name is @View.Name and I live at @View.Address </p> Compare this to the equivalent using the aspx view engine <p> My name is <%:View.Name %> and I live at <%: View.Address %> </p> While not an earth shaking simplification, it is easier on the eyes.  As  we explore other features, this clean markup will become more and more valuable.

  Read the article

• Week in Geek: IPv6 Capable Smartphones Compromise User Privacy Edition

  - by Asian Angel

  This week we learned how to “clone a disk, resize static windows, and create system function shortcuts”, use 45 different services, sites, and apps to help read favorite sites, add MP3 support to Audacity (for saving in MP3 format), install a Wii game loader for easy backups and fast load times, create a Blue Screen of Death in any color, and more. Photo by legofenris. Weekly News Links Photo by The H Security. IPv6: Smartphones compromise users’ privacy Since version 4 of the iOS operating system, Apple’s iPhones, iPads and iPods have been capable of handling IPv6, and most Android devices have been capable since version 2.1. However, the operating systems transfer an ID that discloses information about their users. Dumb phones can be attacked too Much of the discussion of security threats to mobile phones revolves around smartphones, but researchers have found that less advanced “feature phones,” still used by the majority of people around the world, also are vulnerable to attack. SCADA exploit – the dragon awakes The recent publication of an exploit for KingView, a software package for visualising industrial process control systems, appears to be having an effect. Threatpost reports that both the Chinese vendor Wellintech and Chinese CERT (CN-CERT) have now reacted. Sophos: Spam to get more malicious Spam is becoming more malicious in nature as trickery tactics change in line with current user interests, according to a new report released Tuesday by Sophos. Global spam traffic rebounds as Rustock wakes Spam is on the rise after the Rustock botnet awoke from its Christmas slumber, according to Symantec. Cracking WPA keys in the cloud At the forthcoming Black Hat conference, blogger Thomas Roth plans to demonstrate how weak WPA PSKs can be cracked quickly and easily using Amazon’s Elastic Compute Cloud (EC2) service. Microsoft Security Advisory: Vulnerability in Internet Explorer could allow remote code execution Provides a link to more details about the vulnerability and shows a work-around/fix for the problem. Adobe plans to make it easier to delete Flash cookies in web browsers The new API, NPAPI:ClearSiteData, will allow Flash cookies – also known as Local Shared Objects (LSO) – to be deleted directly in the browser’s settings. Firefox beta getting new database standard The ninth beta version of Firefox is set to get support for a standard called IndexedDB that provides a database interface useful for offline data storage and other tasks needing information on a browser’s computer. MetroPCS accused of blocking certain Net content MetroPCS is violating the FCC’s recently approved Net neutrality rules by blocking certain Internet content, say several public interest groups. Server and Tools chief Muglia to leave Microsoft in summer 2011 Microsoft veteran and Server & Tools Business (STB) President Bob Muglia is leaving Microsoft, according to an email that CEO Steve Ballmer sent to employees on January 10. Report: DOJ nearing decision on Google-ITA The U.S. Department of Justice is gearing up for a possible formal antitrust investigation into whether or not Google should be allowed to purchase travel software company ITA Software, according to a report. South Korea says Google Street View broke law Police in South Korea reportedly say Google broke the country’s law when its Street View service captured personal data from unsecure Wi-Fi networks. The backlash over Google’s HTML5 video bet Choosing strategies based on what you believe to be long-term benefits is generally a good idea when running a business, but if you manage to alienate the world in the process, the long term may become irrelevant. Google answers critics on HTML5 Web video move Google responded to critics of its decision to drop support for a popular HTML5 video codec by declaring that a royalty-supported standard for Web video will hold the Web hostage. Random TinyHacker Links A Special GiveAway: a Great Book & Great Security Software The team from 7 Tutorials has a special giveaway running during the month of January. Signed copies of their latest book, full 1-year licenses of BitDefender Internet Security 2011 and free 3-month trials for everyone willing to participate. One Click Rooting For Android Phones Here’s a nice tool that helps you root your Android phone effortlessly. New Angry Birds Free version 1.0 Available in the App Store. Google Code University Learn programming at Google Code University. Capture and Share Your Favorite Part Of a YouTube Video SnipSnip.it lets you share only the part of the video that you like. Super User Questions More great questions and answers from this past week’s popular topics at Super User. What are the Windows A: and B: drives used for? Does OS X support linux-like features? What is the easiest way to make a backup of an entire hard disk? Will shifting from Wireless to Wired network result in better performance? Is it legal to install Windows 7 Home Premium Retail inside VMware virtual machine? How-To Geek Weekly Article Recap Enjoy reading through our hottest articles from this past week. The 50 Best Ways to Disable Built-in Windows Features You Don’t Want The Best of CES (Consumer Electronics Show) in 2011 How to Upgrade Windows 7 Easily (And Understand Whether You Should) The Worst of CES (Consumer Electronics Show) in 2011 The How-To Geek Guide to Audio Editing: Basic Noise Removal One Year Ago on How-To Geek More great articles from one year ago filled with helpful geeky goodness for you to enjoy. Share Text & Images the Easy Way with JustPaste.it Start Portable Firefox in Safe Mode Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible Extensions Protect Your Computer from “Little Hands” with KidSafe Lock Prying Eyes Out of Your Minimized Windows Custom Crocheted Cylon-Cthulhu Hybrid What happens when you let your Cylon Centurion figure and your crocheted Cthulhu spend too many lonely nights together? A Cylon-Cthulhu hybrid, of course! You can get your own from the Cthulhu Chick store over on Etsy. Note: This is not an ad…Ruth is a friend of ours, and this Cylon-Cthulhu hybrid makes the perfect guard for the new MVP trophy in our office. The Geek Note Whether it is a geeky indoor project or just getting outside, we hope that you and your families have a terrific fun-filled weekend! Remember to keep sending those great tips in to us at [email protected]. Photo by qwrrty. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

  Read the article

• My raycaster is putting out strange results, how do I fix it?

  - by JamesK89

  I'm working on a raycaster in ActionScript 3.0 for the fun of it, and as a learning experience. I've got it up and running and its displaying me output as expected however I'm getting this strange bug where rays go through corners of blocks and the edges of blocks appear through walls. Maybe somebody with more experience can point out what I'm doing wrong or maybe a fresh pair of eyes can spot a tiny bug I haven't noticed. Thank you so much for your help! Screenshots: http://i55.tinypic.com/25koebm.jpg http://i51.tinypic.com/zx5jq9.jpg Relevant code: function drawScene() { rays.graphics.clear(); rays.graphics.lineStyle(1, rgba(0x00,0x66,0x00)); var halfFov = (player.fov/2); var numRays:int = ( stage.stageWidth / COLUMN_SIZE ); var prjDist = ( stage.stageWidth / 2 ) / Math.tan(toRad( halfFov )); var angStep = ( player.fov / numRays ); for( var i:int = 0; i < numRays; i++ ) { var rAng = ( ( player.angle - halfFov ) + ( angStep * i ) ) % 360; if( rAng < 0 ) rAng += 360; var ray:Object = castRay(player.position, rAng); drawRaySlice(i*COLUMN_SIZE, prjDist, player.angle, ray); } } function drawRaySlice(sx:int, prjDist, angle, ray:Object) { if( ray.distance >= MAX_DIST ) return; var height:int = int(( TILE_SIZE / (ray.distance * Math.cos(toRad(angle-ray.angle))) ) * prjDist); if( !height ) return; var yTop = int(( stage.stageHeight / 2 ) - ( height / 2 )); if( yTop < 0 ) yTop = 0; var yBot = int(( stage.stageHeight / 2 ) + ( height / 2 )); if( yBot > stage.stageHeight ) yBot = stage.stageHeight; rays.graphics.moveTo( (ray.origin.x / TILE_SIZE) * MINI_SIZE, (ray.origin.y / TILE_SIZE) * MINI_SIZE ); rays.graphics.lineTo( (ray.hit.x / TILE_SIZE) * MINI_SIZE, (ray.hit.y / TILE_SIZE) * MINI_SIZE ); for( var x:int = 0; x < COLUMN_SIZE; x++ ) { for( var y:int = yTop; y < yBot; y++ ) { buffer.setPixel(sx+x, y, clrTable[ray.tile-1] >> ( ray.horz ? 1 : 0 )); } } } function castRay(origin:Point, angle):Object { // Return values var rTexel = 0; var rHorz = false; var rTile = 0; var rDist = MAX_DIST + 1; var rMap:Point = new Point(); var rHit:Point = new Point(); // Ray angle and slope var ra = toRad(angle) % ANGLE_360; if( ra < ANGLE_0 ) ra += ANGLE_360; var rs = Math.tan(ra); var rUp = ( ra > ANGLE_0 && ra < ANGLE_180 ); var rRight = ( ra < ANGLE_90 || ra > ANGLE_270 ); // Ray position var rx = 0; var ry = 0; // Ray step values var xa = 0; var ya = 0; // Ray position, in map coordinates var mx:int = 0; var my:int = 0; var mt:int = 0; // Distance var dx = 0; var dy = 0; var ds = MAX_DIST + 1; // Horizontal intersection if( ra != ANGLE_180 && ra != ANGLE_0 && ra != ANGLE_360 ) { ya = ( rUp ? TILE_SIZE : -TILE_SIZE ); xa = ya / rs; ry = int( origin.y / TILE_SIZE ) * ( TILE_SIZE ) + ( rUp ? TILE_SIZE : -1 ); rx = origin.x + ( ry - origin.y ) / rs; mx = 0; my = 0; while( mx >= 0 && my >= 0 && mx < world.size.x && my < world.size.y ) { mx = int( rx / TILE_SIZE ); my = int( ry / TILE_SIZE ); mt = getMapTile(mx,my); if( mt > 0 && mt < 9 ) { dx = rx - origin.x; dy = ry - origin.y; ds = ( dx * dx ) + ( dy * dy ); if( rDist >= MAX_DIST || ds < rDist ) { rDist = ds; rTile = mt; rMap.x = mx; rMap.y = my; rHit.x = rx; rHit.y = ry; rHorz = true; rTexel = int(rx % TILE_SIZE) } break; } rx += xa; ry += ya; } } // Vertical intersection if( ra != ANGLE_90 && ra != ANGLE_270 ) { xa = ( rRight ? TILE_SIZE : -TILE_SIZE ); ya = xa * rs; rx = int( origin.x / TILE_SIZE ) * ( TILE_SIZE ) + ( rRight ? TILE_SIZE : -1 ); ry = origin.y + ( rx - origin.x ) * rs; mx = 0; my = 0; while( mx >= 0 && my >= 0 && mx < world.size.x && my < world.size.y ) { mx = int( rx / TILE_SIZE ); my = int( ry / TILE_SIZE ); mt = getMapTile(mx,my); if( mt > 0 && mt < 9 ) { dx = rx - origin.x; dy = ry - origin.y; ds = ( dx * dx ) + ( dy * dy ); if( rDist >= MAX_DIST || ds < rDist ) { rDist = ds; rTile = mt; rMap.x = mx; rMap.y = my; rHit.x = rx; rHit.y = ry; rHorz = false; rTexel = int(ry % TILE_SIZE); } break; } rx += xa; ry += ya; } } return { angle: angle, distance: Math.sqrt(rDist), hit: rHit, map: rMap, tile: rTile, horz: rHorz, origin: origin, texel: rTexel }; }

  Read the article

• The Great Divorce

  - by BlackRabbitCoder

  I have a confession to make: I've been in an abusive relationship for more than 17 years now.  Yes, I am not ashamed to admit it, but I'm finally doing something about it. I met her in college, she was new and sexy and amazingly fast -- and I'd never met anything like her before.  Her style and her power captivated me and I couldn't wait to learn more about her.  I took a chance on her, and though I learned a lot from her -- and will always be grateful for my time with her -- I think it's time to move on. Her name was C++, and she so outshone my previous love, C, that any thoughts of going back evaporated in the heat of this new romance.  She promised me she'd be gentle and not hurt me the way C did.  She promised me she'd clean-up after herself better than C did.  She promised me she'd be less enigmatic and easier to keep happy than C was.  But I was deceived.  Oh sure, as far as truth goes, it wasn't a complete lie.  To some extent she was more fun, more powerful, safer, and easier to maintain.  But it just wasn't good enough -- or at least it's not good enough now. I loved C++, some part of me still does, it's my first-love of programming languages and I recognize its raw power, its blazing speed, and its improvements over its predecessor.  But with today's hardware, at speeds we could only dream to conceive of twenty years ago, that need for speed -- at the cost of all else -- has died, and that has left my feelings for C++ moribund. If I ever need to write an operating system or a device driver, then I might need that speed.  But 99% of the time I don't.  I'm a business-type programmer and chances are 90% of you are too, and even the ones who need speed at all costs may be surprised by how much you sacrifice for that.   That's not to say that I don't want my software to perform, and it's not to say that in the business world we don't care about speed or that our job is somehow less difficult or technical.  There's many times we write programs to handle millions of real-time updates or handle thousands of financial transactions or tracking trading algorithms where every second counts.  But if I choose to write my code in C++ purely for speed chances are I'll never notice the speed increase -- and equally true chances are it will be far more prone to crash and far less easy to maintain.  Nearly without fail, it's the macro-optimizations you need, not the micro-optimizations.  If I choose to write a O(n2) algorithm when I could have used a O(n) algorithm -- that can kill me.  If I choose to go to the database to load a piece of unchanging data every time instead of caching it on first load -- that too can kill me.  And if I cross the network multiple times for pieces of data instead of getting it all at once -- yes that can also kill me.  But choosing an overly powerful and dangerous mid-level language to squeeze out every last drop of performance will realistically not make stock orders process any faster, and more likely than not open up the system to more risk of crashes and resource leaks. And that's when my love for C++ began to die.  When I noticed that I didn't need that speed anymore.  That that speed was really kind of a lie.  Sure, I can be super efficient and pack bits in a byte instead of using separate boolean values.  Sure, I can use an unsigned char instead of an int.  But in the grand scheme of things it doesn't matter as much as you think it does.  The key is maintainability, and that's where C++ failed me.  I like to tell the other developers I work with that there's two levels of correctness in coding: Is it immediately correct? Will it stay correct? That is, you can hack together any piece of code and make it correct to satisfy a task at hand, but if a new developer can't come in tomorrow and make a fairly significant change to it without jeopardizing that correctness, it won't stay correct. Some people laugh at me when I say I now prefer maintainability over speed.  But that is exactly the point.  If you focus solely on speed you tend to produce code that is much harder to maintain over the long hall, and that's a load of technical debt most shops can't afford to carry and end up completely scrapping code before it's time.  When good code is written well for maintainability, though, it can be correct both now and in the future. And you know the best part is?  My new love is nearly as fast as C++, and in some cases even faster -- and better than that, I know C# will treat me right.  Her creators have poured hundreds of thousands of hours of time into making her the sexy beast she is today.  They made her easy to understand and not an enigmatic mess.  They made her consistent and not moody and amorphous.  And they made her perform as fast as I care to go by optimizing her both at compile time and a run-time. Her code is so elegant and easy on the eyes that I'm not worried where she will run to or what she'll pull behind my back.  She is powerful enough to handle all my tasks, fast enough to execute them with blazing speed, maintainable enough so that I can rely on even fairly new peers to modify my work, and rich enough to allow me to satisfy any need.  C# doesn't ask me to clean up her messes!  She cleans up after herself and she tries to make my life easier for me by taking on most of those optimization tasks C++ asked me to take upon myself.  Now, there are many of you who would say that I am the cause of my own grief, that it was my fault C++ didn't behave because I didn't pay enough attention to her.  That I alone caused the pain she inflicted on me.  And to some extent, you have a point.  But she was so high maintenance, requiring me to know every twist and turn of her vast and unrestrained power that any wrong term or bout of forgetfulness was met with painful reminders that she wasn't going to watch my back when I made a mistake.  But C#, she loves me when I'm good, and she loves me when I'm bad, and together we make beautiful code that is both fast and safe. So that's why I'm leaving C++ behind.  She says she's changing for me, but I have no interest in what C++0x may bring.  Oh, I'll still keep in touch, and maybe I'll see her now and again when she brings her problems to my door and asks for some attention -- for I always have a soft spot for her, you see.  But she's out of my house now.  I have three kids and a dog and a cat, and all require me to clean up after them, why should I have to clean up after my programming language as well?

  Read the article

• SQL University: What and why of database refactoring

  - by Mladen Prajdic

  This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 3 - Tools of the trade This is a second part of the series and in it we’ll take a look at what database refactoring is and why do it. Why refactor a database To know why refactor we first have to know what refactoring actually is. Code refactoring is a process where we change module internals in a way that does not change that module’s input/output behavior. For successful refactoring there is one crucial thing we absolutely must have: Tests. Automated unit tests are the only guarantee we have that we haven’t broken the input/output behavior before refactoring. If you haven’t go back ad read my post on the matter. Then start writing them. Next thing you need is a code module. Those are views, UDFs and stored procedures. By having direct table access we can kiss fast and sweet refactoring good bye. One more point to have a database abstraction layer. And no, ORM’s don’t fall into that category. But also know that refactoring is NOT adding new functionality to your code. Many have fallen into this trap. Don’t be one of them and resist the lure of the dark side. And it’s a strong lure. We developers in general love to add new stuff to our code, but hate fixing our own mistakes or changing existing code for no apparent reason. To be a good refactorer one needs discipline and focus. Now we know that refactoring is all about changing inner workings of existing code. This can be due to performance optimizations, changing internal code workflows or some other reason. This is a typical black box scenario to the outside world. If we upgrade the car engine it still has to drive on the road (preferably faster) and not fly (no matter how cool that would be). Also be aware that white box tests will break when we refactor. What to refactor in a database Refactoring databases doesn’t happen that often but when it does it can include a lot of stuff. Let us look at a few common cases. Adding or removing database schema objects Adding, removing or changing table columns in any way, adding constraints, keys, etc… All of these can be counted as internal changes not visible to the data consumer. But each of these carries a potential input/output behavior change. Dropping a column can result in views not working anymore or stored procedure logic crashing. Adding a unique constraint shows duplicated data that shouldn’t exist. Foreign keys break a truncate table command executed from an application that runs once a month. All these scenarios are very real and can happen. With the proper database abstraction layer fully covered with black box tests we can make sure something like that does not happen (hopefully at all). Changing physical structures Physical structures include heaps, indexes and partitions. We can pretty much add or remove those without changing the data returned by the database. But the performance can be affected. So here we use our performance tests. We do have them, right? Just by adding a single index we can achieve orders of magnitude performance improvement. Won’t that make users happy? But what if that index causes our write operations to crawl to a stop. again we have to test this. There are a lot of things to think about and have tests for. Without tests we can’t do successful refactoring! Fixing bad code We all have some bad code in our systems. We usually refer to that code as code smell as they violate good coding practices. Examples of such code smells are SQL injection, use of SELECT *, scalar UDFs or cursors, etc… Each of those is huge code smell and can result in major code changes. Take SELECT * from example. If we remove a column from a table the client using that SELECT * statement won’t have a clue about that until it runs. Then it will gracefully crash and burn. Not to mention the widely unknown SELECT * view refresh problem that Tomas LaRock (@SQLRockstar on Twitter) and Colin Stasiuk (@BenchmarkIT on Twitter) talk about in detail. Go read about it, it’s informative. Refactoring this includes replacing the * with column names and most likely change to application using the database. Breaking apart huge stored procedures Have you ever seen seen a stored procedure that was 2000 lines long? I have. It’s not pretty. It hurts the eyes and sucks the will to live the next 10 minutes. They are a maintenance nightmare and turn into things no one dares to touch. I’m willing to bet that 100% of time they don’t have a single test on them. Large stored procedures (and functions) are a clear sign that they contain business logic. General opinion on good database coding practices says that business logic has no business in the database. That’s the applications part. Refactoring such behemoths requires writing lots of edge case tests for the stored procedure input/output behavior and then start to refactor it. First we split the logic inside into smaller parts like new stored procedures and UDFs. Those then get called from the master stored procedure. Once we’ve successfully modularized the database code it’s best to transfer that logic into the applications consuming it. This only leaves the stored procedure with common data manipulation logic. Of course this isn’t always possible so having a plethora of performance and behavior unit tests is absolutely necessary to confirm we’ve actually improved the codebase in some way.   Refactoring is not a popular chore amongst developers or managers. The former don’t like fixing old code, the latter can’t see the financial benefit. Remember how we talked about being lousy at estimating future costs in the previous post? But there comes a time when it must be done. Hopefully I’ve given you some ideas how to get started. In the last post of the series we’ll take a look at the tools to use and an example of testing and refactoring.

  Read the article

• Finally, upgrade from Nokia X3 to Samsung Galaxy S III

  This time, something slightly different but nonetheless not less interesting, hopefully. Living on a remote island like Mauritius, ill-praised 'Cyber Island' in the Indian Ocean, has its advantages in life style and relaxed environment to life in but in terms of technological aspects it can be quite a nightmare. Well, I guess this might be different story to report about... one day. Cyber Island Mauritius Despite it's shiny advertisement as Cyber Island and business in ICT hub to Africa, Mauritius is not on the latest track of available models in computer hardware or, in the context of this article, cellulars or smart-phone, or communication technology in general. Okay, I have to admit that this statement is only partly true. Money can buy, even here in Mauritius. Luckily, there are ways and ways to deal with this outcry of modern, read: technological, civilisation issues. Online shopping you might think? Yes, for sure, until you discover in your checkout procedure that a small island in the Indian Ocean isn't a preferred destination for delivery and the precious time you spent on putting your items into your cart and feeding your personal level of anticipation gets ruined on the last stint. Ordering from abroad saves you money Anyway, I got in touch with my personal courier and luckily there were some extra-kilos left in the luggage. First obstacle sorted, we have a Transporter! Okay, on the next occasion off to Amazon online and using their Prime service for fast delivery. Actually, the order was placed on Saturday evening and everything got delivered on Tuesday morning - nice job in less than 72 hours. Okay, among the items of that shopping rush I ordered a shiny Samsung Galaxy S III 16GB in oceanic blue - did I mention, that you hardly get a blue model in Mauritius? - for my BWE. Interesting side-notes: First, Amazon Germany dropped the prices for roughly 30% on the S3, and we got the 16GB model for less than 500 Euro (or approx. Rs. 19.500,-) compared to the usual Rs. 27.000,- on the local market. It even varies whether the local price is inclusive or exclusive VAT (15%). Second, since a while she was bothering me to get an iPhone and an iPad for her, fair enough I thought, decent hardware, posh design and reliable services. Until we watched the 'magical' introduction of Samsung's new models at the IFA exhibition, she read the bashing comments on Google+ on the iPhone 5 and I gave her a brief summary on the law suit between Apple and Samsung in the USA. So, yes, Samsung USA is right, the next big thing is already here - literally. My BWE loves the look and touch of the Galaxy S3. And for me it was more cost-effective in terms of purchases done at the App Store, ups, Play Store. Transfer of contacts, text messages and media files Okay, now that the hardware is in place, how to transfer all those contacts, text messages, media files, etc. between those two devices? In the past, I used to use the Nokia Communication Suite between various models but now for Android? Well, as usual Google and Bing are reliable friends and among the first hits I came across an article about How to Transfer Contacts from Nokia to Android. Couldn't be easier, right? Well, sort of... my main Windows systems are already running on Windows 8, and this actually caused problems with the mobile/smart-phone device drivers. The article provides the download for an older version 1.10 which upgrades to 2.11 (as time of writing this entry) but both couldn't get the Galaxy S3 and the Nokia connected. Shame on me... the product page clearly doesn't mention Windows 8 (for now) and Windows 8 isn't available for the general audience at all... After I took a spare machine running on Windows Vista everything went smooth. Software installed, upgrade done, device drivers for Android automatically downloaded and installed, and the same painless routine for the Nokia part. I think, I rebooted the system twice during the whole setup procedure but hey, it was more or less a distraction while coding some stuff in ASP.NET MVC and Telerik Kendo UI. The transfer of contacts and text messages was done via Wondershare MobileGo for Android, and all media files by moving the additional microSD card from one device to the other. But even without an external SD card, it would have been very easy to copy the files via Windows Explorer directly. Little catch and excellent service Fine, we are almost done and the only step left is to shift the SIM card... Ouch, gotcha! The X3 uses a standard size SIM card while the S III only accepts microSIM form factor. What an irony, bigger smartphone needs smaller SIM card. Luckily, the next showroom of Emtel is just 5 mins away up the road, and the service staff over there know their job. Finally, after roughly 10 mins of paper work, activation and small chit-chat, the S3 came to life on the mobile network. Owning a smart-phone now and knowing that my BWE would like to interact more on social networks away from home, especially to upload pictures and provide local 'check-ins', I activated a data package for her in advance, too. Even that it is Saturday, everything was already done and ready to be used. Nice bonus: The Emtel clerk directly offered me to set up the configuration for the Emtel data services, yes sure, go ahead, this saves me to search for that in the settings. Okay, spoiler-alert here, setting a static APN to access the Emtel network and the internet wouldn't be a challenge. But hey, she already had the phone in her hands and I could keep my eyes on the children. Well done, Emtel! Resume Thanks to the useful software package by Wondershare is was a hands-free experience to transfer all the data from a Nokia mobile on Symbian S60 to a Samsung Galaxy S III on Android Ice Cream Sandwich (ICS). In the future, this wont be a serious issue at all anymore thanks to synchronisation services and cloud storage. And for now, I'm only waiting for the official upgrades for Jelly Bean.

  Read the article

• Finally, upgrade from Nokia X3 to Samsung Galaxy S III

  This time, something slightly different but nonetheless not less interesting, hopefully. Living on a remote island like Mauritius, ill-praised 'Cyber Island' in the Indian Ocean, has its advantages in life style and relaxed environment to life in but in terms of technological aspects it can be quite a nightmare. Well, I guess this might be different story to report about... one day. Cyber Island Mauritius Despite it's shiny advertisement as Cyber Island and business in ICT hub to Africa, Mauritius is not on the latest track of available models in computer hardware or, in the context of this article, cellulars or smart-phone, or communication technology in general. Okay, I have to admit that this statement is only partly true. Money can buy, even here in Mauritius. Luckily, there are ways and ways to deal with this outcry of modern, read: technological, civilisation issues. Online shopping you might think? Yes, for sure, until you discover in your checkout procedure that a small island in the Indian Ocean isn't a preferred destination for delivery and the precious time you spent on putting your items into your cart and feeding your personal level of anticipation gets ruined on the last stint. Ordering from abroad saves you money Anyway, I got in touch with my personal courier and luckily there were some extra-kilos left in the luggage. First obstacle sorted, we have a Transporter! Okay, on the next occasion off to Amazon online and using their Prime service for fast delivery. Actually, the order was placed on Saturday evening and everything got delivered on Tuesday morning - nice job in less than 72 hours. Okay, among the items of that shopping rush I ordered a shiny Samsung Galaxy S III 16GB in oceanic blue - did I mention, that you hardly get a blue model in Mauritius? - for my BWE. Interesting side-notes: First, Amazon Germany dropped the prices for roughly 30% on the S3, and we got the 16GB model for less than 500 Euro (or approx. Rs. 19.500,-) compared to the usual Rs. 27.000,- on the local market. It even varies whether the local price is inclusive or exclusive VAT (15%). Second, since a while she was bothering me to get an iPhone and an iPad for her, fair enough I thought, decent hardware, posh design and reliable services. Until we watched the 'magical' introduction of Samsung's new models at the IFA exhibition, she read the bashing comments on Google+ on the iPhone 5 and I gave her a brief summary on the law suit between Apple and Samsung in the USA. So, yes, Samsung USA is right, the next big thing is already here - literally. My BWE loves the look and touch of the Galaxy S3. And for me it was more cost-effective in terms of purchases done at the App Store, ups, Play Store. Transfer of contacts, text messages and media files Okay, now that the hardware is in place, how to transfer all those contacts, text messages, media files, etc. between those two devices? In the past, I used to use the Nokia Communication Suite between various models but now for Android? Well, as usual Google and Bing are reliable friends and among the first hits I came across an article about How to Transfer Contacts from Nokia to Android. Couldn't be easier, right? Well, sort of... my main Windows systems are already running on Windows 8, and this actually caused problems with the mobile/smart-phone device drivers. The article provides the download for an older version 1.10 which upgrades to 2.11 (as time of writing this entry) but both couldn't get the Galaxy S3 and the Nokia connected. Shame on me... the product page clearly doesn't mention Windows 8 (for now) and Windows 8 isn't available for the general audience at all... After I took a spare machine running on Windows Vista everything went smooth. Software installed, upgrade done, device drivers for Android automatically downloaded and installed, and the same painless routine for the Nokia part. I think, I rebooted the system twice during the whole setup procedure but hey, it was more or less a distraction while coding some stuff in ASP.NET MVC and Telerik Kendo UI. The transfer of contacts and text messages was done via Wondershare MobileGo for Android, and all media files by moving the additional microSD card from one device to the other. But even without an external SD card, it would have been very easy to copy the files via Windows Explorer directly. Little catch and excellent service Fine, we are almost done and the only step left is to shift the SIM card... Ouch, gotcha! The X3 uses a standard size SIM card while the S III only accepts microSIM form factor. What an irony, bigger smartphone needs smaller SIM card. Luckily, the next showroom of Emtel is just 5 mins away up the road, and the service staff over there know their job. Finally, after roughly 10 mins of paper work, activation and small chit-chat, the S3 came to life on the mobile network. Owning a smart-phone now and knowing that my BWE would like to interact more on social networks away from home, especially to upload pictures and provide local 'check-ins', I activated a data package for her in advance, too. Even that it is Saturday, everything was already done and ready to be used. Nice bonus: The Emtel clerk directly offered me to set up the configuration for the Emtel data services, yes sure, go ahead, this saves me to search for that in the settings. Okay, spoiler-alert here, setting a static APN to access the Emtel network and the internet wouldn't be a challenge. But hey, she already had the phone in her hands and I could keep my eyes on the children. Well done, Emtel! Resume Thanks to the useful software package by Wondershare is was a hands-free experience to transfer all the data from a Nokia mobile on Symbian S60 to a Samsung Galaxy S III on Android Ice Cream Sandwich (ICS). In the future, this wont be a serious issue at all anymore thanks to synchronisation services and cloud storage. And for now, I'm only waiting for the official upgrades for Jelly Bean.

  Read the article

• first install for windows eight.....da beta

  - by raysmithequip

  The W8 preview is now installed and I am enjoying it.  I remember the learning curve of my first unix machine back in the eighties, this ain't that.It is normal for me to do the first os install with a keyboard and low end monitor...you never know what you'll encounter out in the field.  The OS took like a fish to water.  I used a low end INTEL motherboard dp55w I gathered on the cheap, an 1157 i5 from the used bin a pair of 6 gig ddr3 sticks, a rosewell 550 watt power supply a cheap used twenty buck sub 200g wd sata drive, a half working dvd burner and an asus fanless nvidia vid card, not a great one but Sub 50.00 on newey eggey...I did have to hunt the ms forums for a key and of course to activate the thing, if dos would of needed this outmoded ritual, we would still be on cpm and osborne would be a household name, of course little do people know that this ritual was common as far back as the seventies on att unix installs....not, but it was possible, I used to joke about when I ran a bbs, what hell would of been wrought had dos 3.2 machines been required to dial into my bbs to send fido mail to ms and wait for an acknowledgement.  All in all the thing was pushing a seven on the ms richter scale, not including the vid card, sadly it came in at just a tad over three....I wanted to evaluate it for a possible replacement on critical machines that in the past went down due to a vid card fan failure....you have no idea what a customer thinks when you show them a failed vid card fan..."you mean that little plastic piece of junk caused all this!!??!!!"...yea man.  Some production machines don't need any sort of vid, I will at least keep it on the maybe list for those, MTBF is a very important factor, some big box stores should put percentage of failure rate within 24 month estimates on the outside of the carton for sure.  And a warning that the power supplies are already at their limit.  Let's face it, today even 550w can be iffy.A few neat eye candy improvements over the earlier windows is nice, the metro screen is nice, anyone who has used a newer phone recently will intuitively drag their fingers across the screen....lot of good that was with no mouse or touch screen though.  Lucky me, I have been using windows since day one, I still have a copy of win 2.0 (and every other version) for no good reason.  Still the old ix collection of disks is much larger, recompiling any kernal is another silly ritual, same machine, different day, same recompile...argh. Rh is my all time fav, mandrake was always missing something, like it rewrote the init file or something, novell is ok as long as you stay on the beaten path and of course ubuntu normally recompiles with the same errors consistantly....makes life easy that way....no errors on windows eight, just a screen that did not match the installed hardware, natuarally I alt tabbed right out of it, then hit the flag key to find the start menu....no start button. I miss the start button already. Keyboard cowboy funnin and I was browsing the harddrive, nothing stunning there, I like that, means I can find stuff. Only I can't find what I want, the start button....the start menu is that first screen for touch tablets. No biggie for useruser, that is where they will want to be, I can see that. Admins won't want to be there, it is easy enough to get the control panel a bazzilion other ways though, just not the start button. (see a pattern here?). Personally, from the keyboard I find it fun to hit the carets along the location bar at the top of the explorer screen with tabs and arrows and choose SHOW ALL CONTROL PANEL ITEMS, or thereabouts. Bottom line, I love seven and I'll love eight even more!...very happy I did not have to follow the normal rule of thumb (a customer watching me build a system and asking questions said "oh I get it, so every piece you put in there is basically a hundred bucks, right?)...ok, sure, pretty much, more or less, well, ya dude.  It will be WAY past october till I get a real touch screen but I did pick up a pair of cheap tatungs so I can try the NEW main start screen, I parse a lot of folders and have a vision of how a pair of touch screens will be easier than landing a rover on mars.  Ok.  fine, they are way smallish, and I don't expect multitouch to work but we are talking a few percent of a new 21 inch viewsonic touch screen.  Will this OS be a game changer?  I don't know.  Bottom line with all the pads and droids in the world, it is more of a catch up move at first glance.  Not something ms is used to.  An app store?  I can see ms's motivation, the others have it.  I gather there will not be gadgets there, go ahead and see what ms did  to the once populated gadget page...go ahead, google gadgets and take a gander, used to hundreds of gadgets, they are already gone.  They replaced gadgets?  sort of, I'll drop that, it's a bit of a sore point for me.  More of interest was what happened when I downloaded stuff off codeplex and some other normal programs that I like, like orbitron, top o' my list!!...cardware it is...anyways, click on the exe, get a screen, normal for windows, this one indicated that I was not running a normal windows program and had a button for  exit the install, naw, I hit details, a hidden run program anyways came into view....great, my path to the normal windows has detected a program tha.....yea ok, acl is on, fine, moving along I got orbitron installed in record time and was tracking the iss on the newest Microsoft OS, beta of course, felt like the first time I setup bsd all those year ago...FUN!!...I suppose I gotta start to think about budgeting for the real os when it comes out in october, by then I should have a rasberry pi and be done with fedora remixed.  Of course that sounds like fun too!!  I would use this OS on a tablet or phone.  I don't like the idea of being hearded to an app store, don't like that on anything, we are americans and want real choices not marketed hype, lest you are younger with opm (other peoples money).   This os would be neat on a zune, but I suspect the zune is a gonner, I am rooting for microsoft, after all their default password is not admin anymore, nor alpine,  it's blank. Others force a password, my first fawn password was so long I could not even log into it with the password in front of me, who the heck uses %$# anyways, and if I was writing a brute force attack what the heck kinda impasse is that anyways at .00001 microseconds of a code execution cycle (just a non qualified number, not a real clock speed)....AI is where it will be before too long, MS is on that path, perhaps soon someone will sit down and write an app for the kinect that watches your eyes while you scan the new main start screen, clicking on the big E icon when you blink.....boy is that going to be fun!!!! sure. Blink,dammit,blink,dammit...... OPM no doubt.I like windows eight, we are moving forwards, better keep a close eye on ubuntu.  The real clinch comes when open source becomes paid source......don't blink, I already see plenty of very expensive 'ix apps, some even in app stores already.  more to come.......

  Read the article

• Community Outreach - Where Should I Go

  - by Roger Brinkley

  A few days ago I was talking to person new to community development and they asked me what guidelines I used to determine the worthiness of a particular event. After our conversation was over I thought about it a little bit more and figured out there are three ways to determine if any event (be it conference, blog, podcast or other social medias) is worth doing: Transferability, Multiplication, and Impact. Transferability - Is what I have to say useful to the people that are going to hear it. For instance, consider a company that has product offering that can connect up using a number of languages like Scala, Grovey or Java. Sending a Scala expert to talk about Scala and the product is not transferable to a Java User Group, but a Java expert doing the same talk with a Java slant is. Similarly, talking about JavaFX to any Java User Group meeting in Brazil was pretty much a wasted effort until it was open sourced. Once it was open sourced it was well received. You can also look at transferability in relation to the subject matter that you're dealing with. How transferable is a presentation that I create. Can I, or a technical writer on the staff, turn it into some technical document. Could it be converted into some type of screen cast. If we have a regular podcast can we make a reference to the document, catch the high points or turn it into a interview. Is there a way of using this in the sales group. In other words is the document purely one dimensional or can it be re-purposed in other forms. Multiplication - On every trip I'm looking for 2 to 5 solid connections that I can make with developers. These are long term connections, because I know that once that relationship is established it will lead to another 2 - 5 from that connection and within a couple of years were talking about some 100 connections from just one developer. For instance, when I was working on JavaHelp in 2000 I hired a science teacher with a programming background. We've developed a very tight relationship over the year though we rarely see each other more than once a year. But at this JavaOne, one of his employees came up to me and said, "Richard (Rick Hard in Czech) told me to tell you that he couldn't make it to JavaOne this year but if I saw you to tell you hi". Another example is from my Mobile & Embedded days in Brasil. On our very first FISL trip about 5 years ago there were two university students that had created a project called "Marge". Marge was a Bluetooth framework that made connecting bluetooth devices easier. I invited them to a "Sun" dinner that evening. Originally they were planning on leaving that afternoon, but they changed their plans recognizing the opportunity. Their eyes were as big a saucers when they realized the level of engineers at the meeting. They went home started a JUG in Florianoplis that we've visited more than a couple of times. One of them went to work for Brazilian government lab like Berkley Labs, MIT Lab, John Hopkins Applied Physicas Labs or Lincoln Labs in the US. That presented us with an opportunity to show Embedded Java as a possibility for some of the work they were doing there. Impact - The final criteria is how life changing is what I'm going to say be to the individuals I'm reaching. A t-shirt is just a token, but when I reach down and tug at their developer hearts then I know I've succeeded. I'll never forget one time we flew all night to reach Joan Pasoa in Northern Brazil. We arrived at 2am went immediately to our hotel only to be woken up at 6 am to travel 2 hours by car to the presentation hall. When we arrived we were totally exhausted. Outside the facility there were 500 people lined up to hear 6 speakers for the day. That itself was uplifting.  I delivered one of my favorite talks on "I have passion". It was a talk on golf and embedded java development, "Find your passion". When we finished a couple of first year students came up to me and said how much my talk had inspired them. FISL is another great example. I had been about 4 years in a row. FISL is a very young group of developers so capturing their attention is important. Several of the students will come back 2 or 3 years later and ask me questions about research or jobs. And then there's Louis. Louis is one my favorite Brazilians. I can only describe him as a big Brazilian teddy bear. I see him every year at FISL. He works primarily in Java EE but he's attended every single one of my talks over the last 4 years. I can't tell you why, but he always greets me and gives me a hug. For some reason I've had a real impact. And of course when it comes to impact you don't just measure a presentation but every single interaction you have at an event. It's the hall way conversations, the booth conversations, but more importantly it's the conversations at dinner tables or in the cars when you're getting transported to an event. There's a good story that illustrates this. Last year in the spring I was traveling to Goiânia in Brazil. I've been there many times and leaders there no me well. One young man has picked me up at the airport on more than one occasion. We were going out to dinner one evening and he brought his girl friend along. One thing let to another and I eventually asked him, in front of her, "Why haven't you asked her to marry you?" There were all kinds of excuses and she just looked at him and smiled. When I came back in December for JavaOne he came and sought me. "I just want to tell you that I thought a lot about what you said, and I asked her to marry me. We're getting married next Spring." Sometimes just one presentation is all it takes to make an impact. Other times it takes years. Some impacts are directly related to the company and some are more personal in nature. It doesn't matter which it is because it's having the impact that matters.

  Read the article

• Alcatel-Lucent: Enterprise 2.0: The Top 5 Things I would Do Over

  - by Kellsey Ruppel

  Happy Monday! Does anyone else feel as if the weekend went entirely too quickly? At least for those of us in the United States, we have the 4th of July Holiday next week to look forward to This week on the blog, we are going to focus on "WebCenter by Example" and highlight best practices from customers and partners. I recently came across this article and I think this is a great example of how we can learn from one another when it comes to social collaboration adoption. Do you agree with Jem? What things or best practices have you learned in your organizations?  By Jem Janik, Enterprise community manager, Alcatel-Lucent  Not so long ago, Engage, the Alcatel-Lucent employee social network and collaboration platform, celebrated its third birthday. With more than 25,000 members actively interacting each month, Engage has been a big enough success that it’s been the subject of external articles, and often those of us who helped launch it will go out and speak about what aspects contributed to that success. Hindsight is still 20/20 and what it takes to successfully launch an enterprise 2.0 community is fairly well-known now.  Today I want to tell you what I suspect you really want to know about.  As the enterprise community manager for Engage, after three years in, what are the top 5 things I wish we (and I mostly mean me) could do over? #5 Define your analytics solution from the start There is so much to do when you launch a community and initially growing it without complete chaos is quite a task.  It doesn’t take too long to get to a point where you want to focus your continued efforts in growing company collaboration.  Do people truly talk across regional boundaries or have we shifted siloed conversations to a new platform.  Is there one organization that doesn’t interact with another? If you are lucky you’ll have someone in your community team well versed in the world of databases and SQL queries, but it takes time to figure out what backend analytics data actually means. Professional support can be expensive and it may be hard to justify later as it typically has the community manager as the only main customer.  Figure out what you think you’ll want to know and how to get it early on. The sooner the better even if it doesn’t seem that critical at the time. #4 Lobbies guide you to the right places One piece of feedback that comes up more and more as we keep growing Engage is it’s hard to find stuff, or new people are not sure where to start. Something we’re doing now is defining some general topic areas of interest to be like “lobbies” into the platform and some common hashtags to go with them. I liken this to walking into a large medical or professional building for the first time.  There are hundreds of offices, and you look to a sign in the lobby to get guided to the right place for you.  We’re building that sign for members now, but again we missed the boat as the majority of the company has had their initial Engage experience. #3 Clean up, clean up, clean up Knowledge work and folksonomies are messy! The day we opened the doors to Engage I would have said we should keep everything ever created in Engage with an argument that it was a window into our collective knowledge so nothing should go.  Well, 6000+ groups and 200,000+ pieces of content later, I’ve changed my mind.  As previously mentioned, with too much “stuff” the system can be overwhelming to new members and it makes it harder to get what you’re looking for.   Do we need that help document about a tool we no longer have? NO!  Do we need that group that had 1 document and 2 discussions in the last two years? NO! Should we only have one group about a given topic instead of 4?  YES! Last fall, Engage defined a cleanup process for groups not used for a long time.  We also formed a volunteer cleaning army who are extra eyes on the hunt for “stuff” that should be updated, merged, or deleted.  It’s better late than never, but in line with what’s becoming a theme I wish these efforts had started earlier. #2 Communications & local community management One of the most important aspects of my job is to make sure people who should be talking to each other are actually doing it.  Connecting people to the other people they should know, the groups they should join, a piece of content that shouldn’t be missed.   I have worked both inside and outside of communications teams, and they are the best informed people in your company.  They know when something big is coming, how it impacts employees, how it fits with strategy, who else knows more, etc.  Having communications professionals who are power users can help scale up community management because they are already so well connected.  They also need to have the platform skills to pay attention without suffering email overload, how to grab someone’s attention, etc.  I wish I’d had figured this out much earlier.  If I had I would have groomed more communications colleagues into advocates and power members right at the start. #1 Grooming advocates vs. natural advocates I’ve just alluded to this above already. The very best advocates are those who naturally embrace your platform and automatically start to see new ways to work within it.  Those advocates seem to come out of the woodwork naturally since some of them are early adopters.  Not surprisingly, our best advocates today are those same people who were willing to come kick the tires when the community was completely empty.  Unfortunately, we didn’t get a global spread of those natural advocates.  I did ask around when we first launched for other people who might be good candidates, but didn’t push too hard as there were so many other things to get ready.  That was a mistake.  If I could get a redo I would have formally asked for people to be assigned where there were gaps and groomed them into an advocate.  Today as we find new advocates to fill the gaps, people are hesitant as the initial set has three years of practice are ahead of the curve power members; it definitely would have been easier earlier on. As fairly early adopters to corporate scale enterprise collaboration, there hasn’t been a roadmap to follow as we’ve grown Engage, which is part of the fun! It’s clear a lot of issues are more easily tackled the earlier you identify and begin to correct them, and I’ve identified the main five I wish I could redo.  In the spirit of collaboration, I hope someone else learns from my mistakes! View the original article by Jem here. 

  Read the article

• The How-To Geek Holiday Gift Guide (Geeky Stuff We Like)

  - by The Geek

  Welcome to the very first How-To Geek Holiday Gift Guide, where we’ve put together a list of our absolute favorites to help you weed through all of the junk out there to pick the perfect gift for anybody. Though really, it’s just a list of the geeky stuff we want. We’ve got a whole range of items on the list, from cheaper gifts that most anybody can afford, to the really expensive stuff that we’re pretty sure nobody is giving us. Stocking Stuffers Here’s a couple of ideas for items that won’t break the bank. LED Keychain Micro-Light   Magcraft 1/8-Inch Rare Earth Cube Magnets Best little LED keychain light around. If they don’t need the penknife of the above item this is the perfect gift. I give them out by the handfuls and nobody ever says anything but good things about them. I’ve got ones that are years old and still running on the same battery.  Price: $8   Geeks cannot resist magnets. Jason bought this pack for his fridge because he was sick of big clunky magnets… these things are amazing. One tiny magnet, smaller than an Altoid mint, can practically hold a clipboard right to the fridge. Amazing. I spend more time playing with them on the counter than I do actually hanging stuff.  Price: $10 Lots of Geeky Mugs   Astronomy Powerful Green Laser Pointer There’s loads of fun, geeky mugs you can find on Amazon or anywhere else—and they are great choices for the geek who loves their coffee. You can get the Caffeine mug pictured here, or go with an Atari one, Canon Lens, or the Aperture mug based on Portal. Your choice. Price: $7   No, it’s not a light saber, but it’s nearly bright enough to be one—you can illuminate low flying clouds at night or just blind some aliens on your day off. All that for an extremely low price. Loads of fun. Price: $15       Geeky TV Shows and Books Sometimes you just want to relax and enjoy a some TV or a good book. Here’s a few choices. The IT Crowd Fourth Season   Doctor Who, Complete Fifth Series Ridiculous, funny show about nerds in the IT department, loved by almost all the geeks here at HTG. Justin even makes this required watching for new hires in his office so they’ll get his jokes. You can pre-order the fourth season, or pick up seasons one, two, or three for even cheaper. Price: $13   It doesn’t get any more nerdy than Eric’s pick, the fifth all-new series of Doctor Who, where the Daleks are hatching a new master plan from the heart of war-torn London. There’s also alien vampires, humanoid reptiles, and a lot more. Price: $52 Battlestar Galactica Complete Series   MAKE: Electronics: Learning Through Discovery Watch the epic fight to save the human race by finding the fabled planet Earth while being hunted by the robotic Cylons. You can grab the entire series on DVD or Blu-ray, or get the seasons individually. This isn’t your average sci-fi TV show. Price: $150 for Blu-ray.   Want to learn the fundamentals of electronics in a fun, hands-on way? The Make:Electronics book helps you build the circuits and learn how it all works—as if you had any more time between all that registry hacking and loading software on your new PC. Price: $21       Geeky Gadgets for the Gadget-Loving Geek Here’s a few of the items on our gadget list, though lets be honest: geeks are going to love almost any gadget, especially shiny new ones. Klipsch Image S4i Premium Noise-Isolating Headset with 3-Button Apple Control   GP2X Caanoo MAME/Console Emulator If you’re a real music geek looking for some serious quality in the headset for your iPhone or iPod, this is the pair that Alex recommends. They aren’t terribly cheap, but you can get the less expensive S3 earphones instead if you prefer. Price: $50-100   Eric says: “As an owner of an older version, I can say the GP2X is one of my favorite gadgets ever. Touted a “Retro Emulation Juggernaut,” GP2X runs Linux and may be the only open source software console available. Sounds too good to be true, but isn’t.” Price: $150 Roku XDS Streaming Player 1080p   Western Digital WD TV Live Plus HD Media Player If you do a lot of streaming over Netflix, Hulu Plus, Amazon’s Video on Demand, Pandora, and others, the Roku box is a great choice to get your content on your TV without paying a lot of money.  It’s also got Wireless-N built in, and it supports full 1080P HD. Price: $99   If you’ve got a home media collection sitting on a hard drive or a network server, the Western Digital box is probably the cheapest way to get that content on your TV, and it even supports Netflix streaming too. It’ll play loads of formats in full HD quality. Price: $99 Fujitsu ScanSnap S300 Color Mobile Scanner   Doxie, the amazing scanner for documents Trevor said: “This wonderful little scanner has become absolutely essential to me. My desk used to just be a gigantic pile of papers that I didn’t need at the moment, but couldn’t throw away ‘just in case.’ Now, every few weeks, I’ll run that paper pile through this and then happily shred the originals!” Price: $300   If you don’t scan quite as often and are looking for a budget scanner you can throw into your bag, or toss into a drawer in your desk, the Doxie scanner is a great alternative that I’ve been using for a while. It’s half the price, and while it’s not as full-featured as the Fujitsu, it might be a better choice for the very casual user. Price: $150       (Expensive) Gadgets Almost Anybody Will Love If you’re not sure that one of the more geeky presents is gonna work, here’s some gadgets that just about anybody is going to love, especially if they don’t have one already. Of course, some of these are a bit on the expensive side—but it’s a wish list, right? Amazon Kindle       The Kindle weighs less than a paperback book, the screen is amazing and easy on the eyes, and get ready for the kicker: the battery lasts at least a month. We aren’t kidding, either—it really lasts that long. If you don’t feel like spending money for books, you can use it to read PDFs, and if you want to get really geeky, you can hack it for custom screensavers. Price: $139 iPod Touch or iPad       You can’t go wrong with either of these presents—the iPod Touch can do almost everything the iPhone can do, including games, apps, and music, and it has the same Retina display as the iPhone, HD video recording, and a front-facing camera so you can use FaceTime. Price: $229+, depending on model. The iPad is a great tablet for playing games, browsing the web, or just using on your coffee table for guests. It’s well worth buying one—but if you’re buying for yourself, keep in mind that the iPad 2 is probably coming out in 3 months. Price: $500+ MacBook Air  The MacBook Air comes in 11” or 13” versions, and it’s an amazing little machine. It’s lightweight, the battery lasts nearly forever, and it resumes from sleep almost instantly. Since it uses an SSD drive instead of a hard drive, you’re barely going to notice any speed problems for general use. So if you’ve got a lot of money to blow, this is a killer gift. Price: $999 and up. Stuck with No Idea for a Present? Gift Cards! Yeah, you’re not going to win any “thoughtful present” awards with these, but you might just give somebody what they really want—the new Angry Birds HD for their iPad, Cut the Rope, or anything else they want. ITunes Gift Card   Amazon.com Gift Card Somebody in your circle getting a new iPod, iPhone, or iPad? You can get them an iTunes gift card, which they can use to buy music, games or apps. Yep, this way you can gift them a copy of Angry Birds if they don’t already have it. Or even Cut the Rope.   No clue what to get somebody on your list? Amazon gift cards let them buy pretty much anything they want, from organic weirdberries to big screen TVs. Yeah, it’s not as thoughtful as getting them a nice present, but look at the bright side: maybe they’ll get you an Amazon gift card and it’ll balance out. That’s the highlights from our lists—got anything else to add? Share your geeky gift ideas in the comments. Latest Features How-To Geek ETC The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography Happy Snow Bears Theme for Chrome and Iron [Holiday] Download Full Command and Conquer: Tiberian Sun Game for Free Scorched Cometary Planet Wallpaper Quick Fix: Add the RSS Button Back to the Firefox Awesome Bar Dropbox Desktop Client 1.0.0 RC for Windows, Linux, and Mac Released Hang in There Scrat! – Ice Age Wallpaper

  Read the article

• Dotfuscator Deep Dive with WP7

  - by Bil Simser

  I thought I would share some experience with code obfuscation (specifically the Dotfuscator product) and Windows Phone 7 apps. These days twitter is a buzz with black hat and white operations coming out about how the marketplace is insecure and Microsoft failed, blah, blah, blah. So it’s that much more important to protect your intellectual property. You should protect it no matter what when releasing apps into the wild but more so when someone is paying for them. You want to protect the time and effort that went into your code and have some comfort that the casual hacker isn’t going to usurp your next best thing. Enter code obfuscation. Code obfuscation is one tool that can help protect your IP. Basically it goes into your compiled assemblies, rewrites things at an IL level (like renaming methods and classes and hiding logic flow) and rewrites it back so that the assembly or executable is still fully functional but prying eyes using a tool like ILDASM or Reflector can’t see what’s going on.  You can read more about code obfuscation here on Wikipedia. A word to the wise. Code obfuscation isn’t 100% secure. More so on the WP7 platform where the OS expects certain things to be as they were meant to be. So don’t expect 100% obfuscation of every class and every method and every property. It’s just not going to happen. What this does do is give you some level of protection but don’t put all your eggs in one basket and call it done. Like I said, this is just one step in the process. There are a few tools out there that provide code obfuscation and support the Windows Phone 7 platform (see links to other tools at the end of this post). One such tool is Dotfuscator from PreEmptive solutions. The thing about Dotfuscator is that they’ve struck a deal with Microsoft to provide a *free* copy of their commercial product for Windows Phone 7. The only drawback is that it only runs until March 31, 2010. However it’s a good place to start and the focus of this article. Getting Started When you fire up Dotfuscator you’re presented with a dialog to start a new project or load a previous one. We’ll start with a new project. You’re then looking at a somewhat blank screen that shows an Input tab (among others) and you’re probably wondering what to do? Click on the folder icon (first one) and browse to where your xap file is. At this point you can save the project and click on the arrow to start the process. Bam! You’re done. Right? Think again. The program did indeed run and create a new version of your xap (doing it’s thing and rewriting back your *obfuscated* assemblies) but let’s take a look at the assembly in Reflector to see the end result. Remember a xap file is really just a glorified zip file (or cab file if you prefer). When you ran Dotfuscator for the first time with the default settings you’ll see it created a new version of your xap in a folder under “My Documents” called “Dotfuscated” (you can configure the output directory in settings). Here’s the new xap file. Since a xap is just a zip, rename it to .cab or .zip or something and open it with your favorite unarchive program (I use WinRar but it doesn’t matter as long as it can unzip files). If you already have the xap file associated with your unarchive tool the rename isn’t needed. Once renamed extract the contents of the xap to your hard drive: Now you’ll have a folder with the contents of the xap file extracted: Double click or load up your assembly (WindowsPhoneDataBoundApplication1.dll in the example) in Reflector and let’s see the results: Hmm. That doesn’t look right. I can see all the methods and the code is all there for my LoadData method I wanted to protect. Product failure. Let’s return it for a refund. Hold your horses. We need to check out the settings in the program first. Remember when we loaded up our xap file. It started us on the Input tab but there was a settings tab before that. Wonder what it does? Here’s the default settings: Renaming Taking a closer look, all of the settings in Feature are disabled. WTF? Yeah, it leaves me scratching my head why an obfuscator by default doesn’t obfuscate. However it’s a simple fix to change these settings. Let’s enable Renaming as it sounds like a good start. Renaming obscures code by renaming methods and fields to names that are not understandable. Great. Run the tool again and go through the process of unzipping the updated xap and let’s take a look in Reflector again at our project. This looks a lot better. Lots of methods named a, b, c, d, etc. That’ll help slow hackers down a bit. What about our logic that we spent days weeks on? Let’s take a look at the LoadData method: What gives? We have renaming enabled but all of our code is still there. If you look through all your methods you’ll find it’s still sitting there out in the open. Control Flow Back to the settings page again. Let’s enable Control Flow now. Control Flow obfuscation synthesizes branching, conditional, and iterative constructs (such as if, for, and while) that produce valid executable logic, but yield non-deterministic semantic results when decompilation is attempted. In other words, the code runs as before, but decompilers cannot reproduce the original code. Do the dance again and let’s see the results in Reflector. Ahh, that’s better. Methods renamed *and* nobody can look at our LoadData method now. Life is good. More than Minimum This is the bare minimum to obfuscate your xap to at least a somewhat comfortable level. However I did find that while this worked in my Hello World demo, it didn’t work on one of my real world apps. I had to do some extra tweaking with that. Below are the screens that I used on one app that worked. I’m not sure what it was about the app that the approach above didn’t work with (maybe the extra assembly?) but it works and I’m happy with it. YMMV. Remember to test your obfuscated app on your device first before submitting to ensure you haven’t obfuscated the obfuscator. settings tab: rename tab: string encryption tab: premark tab: A few final notes Play with the settings and keep bumping up the bar to try to get as much obfuscation as you can. The more the better but remember you can overdo it. Always (always, always, always) deploy your obfuscated xap to your device and test it before submitting to the marketplace. I didn’t and got rejected because I had gone overboard with the obfuscation so the app wouldn’t launch at all. Not everything is going to be obfuscated. Specifically I don’t see a way to obfuscate auto properties and a few other language features. Again, if you crank the settings up you might hide these but I haven’t spent a lot of time optimizing the process. Some people might say to obfuscate your xaml using string encryption but again, test, test, test. Xaml is picky so too much obfuscation (or any) might disable your app or produce odd rendering effets. Remember, obfuscation is not 100% secure! Don’t rely on it as a sole way of protecting your assets. Other Tools Dotfuscator is one just product and isn’t the end-all be-all to obfuscation so check out others below. For example, Crypto can make it so Reflector doesn’t even recognize the app as a .NET one and won’t open it. Others can encrypt resources and Xaml markup files. Here are some other obfuscators that support the Windows Phone 7 platform. Feel free to give them a try and let people know your experience with them! Dotfuscator Windows Phone Edition Crypto Obfuscator for .NET DeepSea Obfuscation

  Read the article

• CodePlex Daily Summary for Saturday, May 12, 2012

  CodePlex Daily Summary for Saturday, May 12, 2012Popular ReleasesKanboxAPI: KanboxAPI beta: ????? Token Info List DownloadMedia Companion: Media Companion 3.502b: It has been a slow week, but this release addresses a couple of recent bugs: Movies Multi-part Movies - Existing .nfo files that differed in name from the first part, were missed and scraped again. Trailers - MC attempted to scrape info for existing trailers. TV Shows Show Scraping - shows available only in the non-default language would not show up in the main browser. The correct language can now be selected using the TV Show Selector for a single show. General Will no longer prompt for ...NewLife XCode ??????: XCode v8.5.2012.0508、XCoder v4.7.2012.0320: X????： 1，????For .Net 4.0?? XCoder????： 1，???????，????X????，?????? XCode????： 1，Insert/Update/Delete???????????????，???SQL???? 2，IEntityOperate?????? 3，????????IEntityTree 4，????????????????? 5，?????????? 6，??????????????dycom: v1.0: DYCom ????????：Silverlight, Windows phone 7.5.NETMF_for_STM32: Beta 1 Release: First public beta release.Google Book Downloader: Google Books Downloader Lite 1.0: Google Books Downloader Lite 1.0Python Tools for Visual Studio: 1.5 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports Cpython, IronPython, Jython and Pypy • Python editor with advanced member, signature intellisense and refactoring • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 1: JayData 1.0.0 RC1 Refresh 1 JayData is a unified data access API to webSQL, indexedDB, OData, Facebook and YQL. Overview The major feature of this release is related to OData provider, FunctionImport is now generally supported. Now you can consume OData service operations (WebMethods). We extended the JaySvcUtil to generate the necessary metadata. We included many fixes, such as the Visual Studio 2010 IntelliSense optimalization (RC1 was optimized only to VS11). It's recommended to upgrade...AD Gallery: AD Gallery 1.2.7: NewsFixed a bug which caused the current thumbnail not to be highlighted Added a hook to take complete control over how descriptions are handled, take a look under Documentation for more info Added removeAllImages()51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.4.8: One Click Install from NuGet Data ChangesIncludes 42 new browser properties in both the Lite and Premium data sets. Premium Data includes many new devices including Nokia Lumia 900, BlackBerry 9220 and HTC One, the Samsung Galaxy Tab 2 range and Samsung Galaxy S III. Lite data includes devices released in January 2012. Changes to Version 2.1.4.81. The IsFirstTime method of the RedirectModule will now return the same value when called multiple times for the same request. This was prevent...Mugen Injection: Mugen Injection ver 2.2 (WinRT supported): Added NamedParameterAttribute, OptionalParameterAttribute. Added behaviors ICycleDependencyBehavior, IResolveUnregisteredTypeBehavior. Added WinRT support. Added support for NET 4.5. Added support for MVC 4.NShape - .Net Diagramming Framework for Industrial Applications: NShape 2.0.1: Changes in 2.0.1:Bugfixes: IRepository.Insert(Shape shape) and IRepository.Insert(IEnumerable<Shape> shapes) no longer insert shape connections. Several context menu items did display although the required permission was not granted Display did not reset the visible and active layers when changing the diagram NullReferenceException when pressing Del key and no shape was selected Changed Behavior: LayerCollection.Find("") no longer throws an exception. Improvements: Display does not rese...AcDown????? - Anime&Comic Downloader: AcDown????? v3.11.6: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...sb0t: sb0t 4.64: New commands added: #scribble <url> #adminscribble on #adminscribble offDocument.Editor: 2012.4: Whats new for Document.Editor 2012.4: Improved Template support Improved Options Dialog Minor Bug Fix's, improvements and speed upsJson.NET: Json.NET 4.5 Release 5: New feature - Added ItemIsReference, ItemReferenceLoopHandling, ItemTypeNameHandling, ItemConverterType to JsonPropertyAttribute New feature - Added ItemRequired to JsonObjectAttribute New feature - Added Path to JsonWriterException Change - Improved deserializer call stack memory usage Change - Moved the PDB files out of the NuGet package into a symbols package Fix - Fixed infinite loop from an input error when reading an array and error handling is enabled Fix - Fixed base objec...BlackJumboDog: Ver5.6.1: 2012.05.07 Ver5.6.1 (1)????????????????(Ver5.6.0??)??? (2)HTTP?????SSL????????????（Ver5.6.0??）??? (3)HTTP?????2G??????????????????????????? (4)HTP????　?????????ExtAspNet: ExtAspNet v3.1.5: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-05-06 v3.1.5 -????????：grid/grid_twogrid.aspx。 +?...SharpDevelop: SharpDevelop 4.2: Please see http://community.sharpdevelop.net/forums/t/15772.aspx for the release announcement.Desktop Google Reader: 1.4.4: Taskbar icon overlay (number of unread items) can now be switched off in preferences (Windows Vista / 7 only) Maximize button now can be toggled to be fullscreen (as befor) or only normal maximize (taskbar stays visible) in preferences List of feeds is now sorted by alphabetNew Projects3D Scene Editor: A generic 3d level editor built using XNA to speed up designing and building game levels.Attribute Based Cache using Unity Interception: Unity interception handler attribute for Caching which allows to apply boiler plate caching pattern to classes, and class members directly, without configuring them in the application configuration file. Configure your choice of Cache Provider (ObjectCache, Azure included) in the Unity IoC Container and apply the attribute to the method which you want to cache AutoCompleteBox for WinRT: None yetBAC2 Bachelor's Thesis Source Code: The source code of my Bachelor's ThesisBAMabase: It's a bamabase.BBSProject: BBSProjectBrain 2 - Game Engine: Brain 2 is a Game Engine that runs on multiple platforms.cobra-winldtp: Cobra - Windows version of Linux Desktop Testing Project (WinLDTP) - http://ldtp.freedesktop.org LDTP is a GUI test automation tool works on both Windows and Linux platform Windows GUI test automation tool written in C# and test scripts can be written in Python for now. Ruby API will be added soon.CS322: C# Programski jezikDoxBotPlugin: The DoxBotPlugin is a Plug-In for Ice-Chat9 that allows a user to use Icechat9 as both a normal IRC client and to switch on bot mode in certain channels to have DoxBotPlugin act on their behalf.dycom: DYCom??(DY Communication)???????????,?????????????????.????????????????. ??????????????????????,?????????????????。Eyes Protector: PL: Program pomagajacy w ochronie oczu przed przemeczeniem zwiazanym ze zbyt dluga praca przy komputerze. EN: ---kshell: ????Linux??????Lumia: This is Lumia project.MacroDoc: MacroDoc is an engine written in C# for composing documents from reusable pieces of structure and content.Mssql: This is Sql Server project.NETMF_for_STM32: This is the Codeplex project for NETMF for STM32 (F4 Edition). Ocular - a free, open source WYSIWYG editor for HTML: Ocular is a free C# WYSIWYG HTML editor, similar to Adobe Dreamweaver. We are always looking for contributors, so please help us!PeopleCredit: Prototype web service to maintain all employee credits.Project Server workflow: This workflow creates the project site for Basic project plan EPT when workflow task is approved.(This is the correction done over the Branching workflow provided with Project Server 2010 SDK). Workflow task is created using PSWApprovalTask Content type in Project Server Workflow Task List. Quick Reminder: PL: Program pomagajacy zapisac szybkie przypomnienia podczas pracy przy komputerze. EN: ---Random Projects: My random projects...Recommendation Engine Demo: How does the Amazon recommendation works? This is about visualizing the item to item collaborations filtering mechanism using a item-to-item matrix table. The item-to-item matrix, the vectors and the calculated data values are displayed. There are n different items and the item recommendation can display up to m items. There are implemented different item-to-item neighborhood functions. A simple max count of seen neighbor items, the Cosine Similarity and the Jaccard Index. A t...SaveSeaTurtle: Sea TurtleSharpGpx: SharpGpx implements an object model for reading and writing GPX (GPS eXchange Format).SlimDo: SlimDo is a scripting language coded in C#Spring: This is Spring.Net projectSQL Server Quick Tools Pack: SQL Server Quick Tools Pack for your sql server SuLD framework: Supported Link Discovery framework (SuLD) is a tool to discover links to multiple Linked Data datasets. Finding is supported by various features like synonym module or autocomplete.TQuery.Net: .Net??????WAAP - World of warcraft Auction house Analysis Project: A project in which we try to analyse prices and auctioneers on the various World of Warcraft Auction housesxhttp.net: The Xhttp.Net framework is a dotnet implementation of the Extended Hypertext Transfer Protocol (http://www.xhttp.org), with simple service integration, full arguments support including Base64 and DateTime, single and multiple asynchronous requests, data streaming, remote API creation from XHTTP service schemas, and a runtime plugin architecture.

  Read the article

• Book Review - Programming Windows Azure by Siriram Krishnan

  - by BuckWoody

  As part of my professional development, I’ve created a list of books to read throughout the year, starting in June of 2011. This a review of the first one, called Programming Windows Azure by Siriram Krishnan. You can find my entire list of books I’m reading for my career here: http://blogs.msdn.com/b/buckwoody/archive/2011/06/07/head-in-the-clouds-eyes-on-the-books.aspx  Why I Chose This Book: As part of my learning style, I try to read multiple books about a single subject. I’ve found that at least 3 books are necessary to get the right amount of information to me. This is a “technical” work, meaning that it deals with technology and not business, writing or other facets of my career. I’ll have a mix of all of those as I read along. I chose this work in addition to others I’ve read since it covers everything from an introduction to more advanced topics in a single book. It also has some practical examples of actually working with the product, particularly on storage. Although it’s dated, many examples normally translate. I also saw that it had pretty good reviews. What I learned: I learned a great deal about storage, and many useful code snippets. I do think that there could have been more of a focus on the application fabric - but of course that wasn’t as mature a feature when this book was written. I learned some great architecture examples, and in one section I learned more about encryption. In that example, however, I would rather have seen the examples go the other way - the book focused on moving data from on-premise to Azure storage in an encrypted fashion. Using the Application Fabric I would rather see sensitive data left in a hybrid fashion on premise, and connect to for the Azure application. Even so, the examples were very useful. If you’re looking for a good “starter” Azure book, this is a good choice. I also recommend the last chapter as a quick read for a DBA, or Database Administrator. It’s not very long, but useful. Note that the limits described are incorrect - which is one of the dangers of reading a book about any cloud offering. The services offered are updated so quickly that the information is in constant danger of being “stale”. Even so, I found this a useful book, which I believe will help me work with Azure better. Raw Notes: I take notes as I read, calling that process “reading with a pencil”. I find that when I do that I pay attention better, and record some things that I need to know later. I’ll take these notes, categorize them into a OneNote notebook that I synchronize in my Live.com account, and that way I can search them from anywhere. I can even read them on the web, since the Live.com has a OneNote program built in. Note that these are the raw notes, so they might not make a lot of sense out of context - I include them here so you can watch my though process. Programming Windows Azure by Siriram Krishnan: Learning about how to select applications suitable for Distributed Technology. Application Fabric gets the least attention; probably because it was newer at the time. Very clear (Chapter One) Good foundation Background and history, but not too much I normally arrange my descriptions differently, starting with the use-cases and moving to physicality, but this difference helps me. Interesting that I am reading this using Safari Books Online, which uses many of these concepts. Taught me some new aspects of a Hypervisor – very low-level information about the Azure Fabric (not to be confused with the Application Fabric feature) (Chapter Two) Good detail of what is included in the SDK. Even more is available now. CS = Cloud Service (Chapter 3) Place Storage info in the configuration file, since it can be streamed in-line with a running app. Ditto for logging, and keep separated configs for staging and testing. Easy-switch in and switch out.  (Chapter 4) There are two Runtime API’s, one of external and one for internal. Realizing how powerful this paradigm really is. Some places seem light, and to drop off but perhaps that’s best. Managing API is not charged, which is nice. I don’t often think about the price, until it comes to an actual deployment (Chapter 5) Csmanage is something I want to dig into deeper. API requires package moves to Blob storage first, so it needs a URL. Csmanage equivalent can be written in Unix scripting using openssl. Upgrades are possible, and you use the upgradeDomainCount attribute in the Service-Definition.csdef file  Always use a low-privileged account to test on the dev fabric, since Windows Azure runs in partial trust. Full trust is available, but can be dangerous and must be well-thought out. (Chapter 6) Learned how to run full CMD commands in a web window – not that you would ever do that, but it was an interesting view into those links. This leads to a discussion on hosting other runtimes (such as Java or PHP) in Windows Azure. I got an expanded view on this process, although this is where the book shows its age a little. Books can be a problem for Cloud Computing for this reason – things just change too quickly. Windows Azure storage is not eventually consistent – it is instantly consistent with multi-phase commit. Plumbing for this is internal, not required to code that. (Chapter 7) REST API makes the service interoperable, hybrid, and consistent across code architectures. Nicely done. Use affinity groups to keep data and code together. Side note: e-book readers need a common “notes” feature. There’s a decent quick description of REST in this chapter. Learned about CloudDrive code – PowerShell sample that mounts Blob storage as a local provider. Works against Dev fabric by default, can be switched to Account. Good treatment in the storage chapters on the differences between using Dev storage and Azure storage. These can be mitigated. No, blobs are not of any size or number. Not a good statement (Chapter 8) Blob storage is probably Azure’s closest play to Infrastructure as a Service (Iaas). Blob change operations must be authenticated, even when public. Chapters on storage are pretty in-depth. Queue Messages are base-64 encoded (Chapter 9) The visibility timeout ensures processing of message in a disconnected system. Order is not guaranteed for a message, so if you need that set an increasing number in the queue mechanism. While Queues are accessible via REST, they are not public and are secured by default. Interesting – the header for a queue request includes an estimated count. This can be useful to create more worker roles in a dynamic system. Each Entity (row) in the Azure Table service is atomic – all or nothing. (Chapter 10) An entity can have up to 255 Properties  Use “ID” for the class to indicate the key value, or use the [DataServiceKey] Attribute.  LINQ makes working with the Azure Table Service much easier, although Interop is certainly possible. Good description on the process of selecting the Partition and Row Key.  When checking for continuation tokens for pagination, include logic that falls out of the check in case you are at the last page.  On deleting a storage object, it is instantly unavailable, however a background process is dispatched to perform the physical deletion. So if you want to re-create a storage object with the same name, add retry logic into the code. Interesting approach to deleting an index entity without having to read it first – create a local entity with the same keys and apply it to the Azure system regardless of change-state.  Although the “Indexes” description is a little vague, it’s interesting to see a Folding and Stemming discussion a-la the Porter Stemming Algorithm. (Chapter 11)  Presents a better discussion of indexes (at least inverted indexes) later in the chapter. Great treatment for DBA’s in Chapter 11. We need to work on getting secondary indexes in Table storage. There is a limited form of transactions called “Entity Group Transactions” that, although they have conditions, makes a transactional system more possible. Concurrency also becomes an issue, but is handled well if you’re using Data Services in .NET. It watches the Etag and allows you to take action appropriately. I do not recommend using Azure as a location for secure backups. In fact, I would rather have seen the examples in (Chapter 12) go the other way, showing how data could be brought back to a local store as a DR or HA strategy. Good information on cryptography and so on even so. Chapter seems out of place, and should be combined with the Blob chapter.  (Chapter 13) on SQL Azure is dated, although the base concepts are OK.  Nice example of simple ADO.NET access to a SQL Azure (or any SQL Server Really) database.  

  Read the article

• 8 Reasons Why Even Microsoft Agrees the Windows Desktop is a Nightmare

  - by Chris Hoffman

  Let’s be honest: The Windows desktop is a mess. Sure, it’s extremely powerful and has a huge software library, but it’s not a good experience for average people. It’s not even a good experience for geeks, although we tolerate it. Even Microsoft agrees about this. Microsoft’s Surface tablets with Windows RT don’t support any third-party desktop apps. They consider this a feature — users can’t install malware and other desktop junk, so the system will always be speedy and secure. Malware is Still Common Malware may not affect geeks, but it certainly continues to affect average people. Securing Windows, keeping it secure, and avoiding unsafe programs is a complex process. There are over 50 different file extensions that can contain harmful code to keep track of. It’s easy to have theoretical discussions about how malware could infect Mac computers, Android devices, and other systems. But Mac malware is extremely rare, and has  generally been caused by problem with the terrible Java plug-in. Macs are configured to only run executables from identified developers by default, whereas Windows will run everything. Android malware is talked about a lot, but Android malware is rare in the real world and is generally confined to users who disable security protections and install pirated apps. Google has also taken action, rolling out built-in antivirus-like app checking to all Android devices, even old ones running Android 2.3, via Play Services. Whatever the reason, Windows malware is still common while malware for other systems isn’t. We all know it — anyone who does tech support for average users has dealt with infected Windows computers. Even users who can avoid malware are stuck dealing with complex and nagging antivirus programs, especially since it’s now so difficult to trust Microsoft’s antivirus products. Manufacturer-Installed Bloatware is Terrible Sit down with a new Mac, Chromebook, iPad, Android tablet, Linux laptop, or even a Surface running Windows RT and you can enjoy using your new device. The system is a clean slate for you to start exploring and installing your new software. Sit down with a new Windows PC and the system is a mess. Rather than be delighted, you’re stuck reinstalling Windows and then installing the necessary drivers or you’re forced to start uninstalling useless bloatware programs one-by-one, trying to figure out which ones are actually useful. After uninstalling the useless programs, you may end up with a system tray full of icons for ten different hardware utilities anyway. The first experience of using a new Windows PC is frustration, not delight. Yes, bloatware is still a problem on Windows 8 PCs. Manufacturers can customize the Refresh image, preventing bloatware rom easily being removed. Finding a Desktop Program is Dangerous Want to install a Windows desktop program? Well, you’ll have to head to your web browser and start searching. It’s up to you, the user, to know which programs are safe and which are dangerous. Even if you find a website for a reputable program, the advertisements on that page will often try to trick you into downloading fake installers full of adware. While it’s great to have the ability to leave the app store and get software that the platform’s owner hasn’t approved — as on Android — this is no excuse for not providing a good, secure software installation experience for typical users installing typical programs. Even Reputable Desktop Programs Try to Install Junk Even if you do find an entirely reputable program, you’ll have to keep your eyes open while installing it. It will likely try to install adware, add browse toolbars, change your default search engine, or change your web browser’s home page. Even Microsoft’s own programs do this — when you install Skype for Windows desktop, it will attempt to modify your browser settings t ouse Bing, even if you’re specially chosen another search engine and home page. With Microsoft setting such an example, it’s no surprise so many other software developers have followed suit. Geeks know how to avoid this stuff, but there’s a reason program installers continue to do this. It works and tricks many users, who end up with junk installed and settings changed. The Update Process is Confusing On iOS, Android, and Windows RT, software updates come from a single place — the app store. On Linux, software updates come from the package manager. On Mac OS X, typical users’ software updates likely come from the Mac App Store. On the Windows desktop, software updates come from… well, every program has to create its own update mechanism. Users have to keep track of all these updaters and make sure their software is up-to-date. Most programs now have their act together and automatically update by default, but users who have old versions of Flash and Adobe Reader installed are vulnerable until they realize their software isn’t automatically updating. Even if every program updates properly, the sheer mess of updaters is clunky, slow, and confusing in comparison to a centralized update process. Browser Plugins Open Security Holes It’s no surprise that other modern platforms like iOS, Android, Chrome OS, Windows RT, and Windows Phone don’t allow traditional browser plugins, or only allow Flash and build it into the system. Browser plugins provide a wealth of different ways for malicious web pages to exploit the browser and open the system to attack. Browser plugins are one of the most popular attack vectors because of how many users have out-of-date plugins and how many plugins, especially Java, seem to be designed without taking security seriously. Oracle’s Java plugin even tries to install the terrible Ask toolbar when installing security updates. That’s right — the security update process is also used to cram additional adware into users’ machines so unscrupulous companies like Oracle can make a quick buck. It’s no wonder that most Windows PCs have an out-of-date, vulnerable version of Java installed. Battery Life is Terrible Windows PCs have bad battery life compared to Macs, IOS devices, and Android tablets, all of which Windows now competes with. Even Microsoft’s own Surface Pro 2 has bad battery life. Apple’s 11-inch MacBook Air, which has very similar hardware to the Surface Pro 2, offers double its battery life when web browsing. Microsoft has been fond of blaming third-party hardware manufacturers for their poorly optimized drivers in the past, but there’s no longer any room to hide. The problem is clearly Windows. Why is this? No one really knows for sure. Perhaps Microsoft has kept on piling Windows component on top of Windows component and many older Windows components were never properly optimized. Windows Users Become Stuck on Old Windows Versions Apple’s new OS X 10.9 Mavericks upgrade is completely free to all Mac users and supports Macs going back to 2007. Apple has also announced their intention that all new releases of Mac OS X will be free. In 2007, Microsoft had just shipped Windows Vista. Macs from the Windows Vista era are being upgraded to the latest version of the Mac operating system for free, while Windows PCs from the same era are probably still using Windows Vista. There’s no easy upgrade path for these people. They’re stuck using Windows Vista and maybe even the outdated Internet Explorer 9 if they haven’t installed a third-party web browser. Microsoft’s upgrade path is for these people to pay $120 for a full copy of Windows 8.1 and go through a complicated process that’s actaully a clean install. Even users of Windows 8 devices will probably have to pay money to upgrade to Windows 9, while updates for other operating systems are completely free. If you’re a PC geek, a PC gamer, or someone who just requires specialized software that only runs on Windows, you probably use the Windows desktop and don’t want to switch. That’s fine, but it doesn’t mean the Windows desktop is actually a good experience. Much of the burden falls on average users, who have to struggle with malware, bloatware, adware bundled in installers, complex software installation processes, and out-of-date software. In return, all they get is the ability to use a web browser and some basic Office apps that they could use on almost any other platform without all the hassle. Microsoft would agree with this, touting Windows RT and their new “Windows 8-style” app platform as the solution. Why else would Microsoft, a “devices and services” company, position the Surface — a device without traditional Windows desktop programs — as their mass-market device recommended for average people? This isn’t necessarily an endorsement of Windows RT. If you’re tech support for your family members and it comes time for them to upgrade, you may want to get them off the Windows desktop and tell them to get a Mac or something else that’s simple. Better yet, if they get a Mac, you can tell them to visit the Apple Store for help instead of calling you. That’s another thing Windows PCs don’t offer — good manufacturer support. Image Credit: Blanca Stella Mejia on Flickr, Collin Andserson on Flickr, Luca Conti on Flickr     

  Read the article

• Apache + Codeigniter + New Server + Unexpected Errors

  - by ngl5000

  Alright here is the situation: I use to have my codeigniter site at bluehost were I did not have root access, I have since moved that site to rackspace. I have not changed any of the PHP code yet there has been some unexpected behavior. Unexpected Behavior: http://mysite.com/robots.txt Both old and new resolve to the robots file http://mysite.com/robots.txt/ The old bluehost setup resolves to my codeigniter 404 error page. The rackspace config resolves to: Not Found The requested URL /robots.txt/ was not found on this server. **This instance leads me to believe that there could be a problem with my mod rewrites or lack there of. The first one produces the error correctly through php while it seems the second senario lets the server handle this error. The next instance of this problem is even more troubling: 'http://mysite.com/search/term/9 x 1-1%2F2 white/' New site results in: Bad Request Your browser sent a request that this server could not understand. Old site results in: The actual page being loaded and the search term being unencoded. I have to assume that this has something to do with the fact that when I went to the new server I went from root level htaccess file to httpd.conf file and virtual server default and default-ssl. Here they are: Default file: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName mysite.com DocumentRoot /var/www <Directory /> Options +FollowSymLinks AllowOverride None </Directory> <Directory /var/www> Options -Indexes +FollowSymLinks -MultiViews AllowOverride None Order allow,deny allow from all RewriteEngine On RewriteBase / # force no www. (also does the IP thing) RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} !^mysite\.com [NC] RewriteRule ^(.*)$ http://mysite.com/$1 [R=301,L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)\.(\d+)\.(js|css|png|jpg|gif)$ $1.$3 [L] # index.php remove any index.php parts RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] # codeigniter direct RewriteCond $0 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^.*$ index.php [L] </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Default-ssl File <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost ServerName mysite.com DocumentRoot /var/www <Directory /> Options +FollowSymLinks AllowOverride None </Directory> <Directory /var/www> Options -Indexes +FollowSymLinks -MultiViews AllowOverride None Order allow,deny allow from all RewriteEngine On RewriteBase / RewriteCond %{SERVER_PORT} !^443 RewriteRule ^ https://mysite.com%{REQUEST_URI} [R=301,L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)\.(\d+)\.(js|css|png|jpg|gif)$ $1.$3 [L] # index.php remove any index.php parts RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] # codeigniter direct RewriteCond $0 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^.*$ index.php [L] </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # Use our self-signed certificate by default SSLCertificateFile /etc/apache2/ssl/certs/www.mysite.com.crt SSLCertificateKeyFile /etc/apache2/ssl/private/www.mysite.com.key # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. # SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem # SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 # MSIE 7 and newer should be able to use keepalive BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown httpd.conf File Just a lot of stuff from html5 boiler plate, I will post it if need be Old htaccess file <IfModule mod_rewrite.c> # index.php remove any index.php parts RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] RewriteCond $1 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^(.*)/$ /$1 [r=301,L] # codeigniter direct RewriteCond $1 !^(index\.php|assets|robots\.txt|sitemap\.xml|favicon\.ico) RewriteRule ^(.*)$ /index.php/$1 [L] </IfModule> Any Help would be hugely appreciated!!

  Read the article

• Solaris: What comes next?

  - by alanc

  As you probably know by now, a few months ago, we released Solaris 11 after years of development. That of course means we now need to figure out what comes next - if Solaris 11 is “The First Cloud OS”, then what do we need to make future releases of Solaris be, to be modern and competitive when they're released? So we've been having planning and brainstorming meetings, and I've captured some notes here from just one of those we held a couple weeks ago with a number of the Silicon Valley based engineers. Now before someone sees an idea here and calls their product rep wanting to know what's up, please be warned what follows are rough ideas, and as I'll discuss later, none of them have any committment, schedule, working code, or even plan for integration in any possible future product at this time. (Please don't make me force you to read the full Oracle future product disclaimer here, you should know it by heart already from the front of every Oracle product slide deck.) To start with, we did some background research, looking at ideas from other Oracle groups, and competitive OS'es. We examined what was hot in the technology arena and where the interesting startups were heading. We then looked at Solaris to see where we could apply those ideas. Making Network Admins into Socially Networking Admins We all know an admin who has grumbled about being the only one stuck late at work to fix a problem on the server, or having to work the weekend alone to do scheduled maintenance. But admins are humans (at least most are), and crave companionship and community with their fellow humans. And even when they're alone in the server room, they're never far from a network connection, allowing access to the wide world of wonders on the Internet. Our solution here is not building a new social network - there's enough of those already, and Oracle even has its own Oracle Mix social network already. What we proposed is integrating Solaris features to help engage our system admins with these social networks, building community and bringing them recognition in the workplace, using achievement recognition systems as found in many popular gaming platforms. For instance, if you had a Facebook account, and a group of admin friends there, you could register it with our Social Network Utility For Facebook, and then your friends might see: Alan earned the achievement Critically Patched (April 2012) for patching all his servers. Matt is only at 50% - encourage him to complete this achievement today! To avoid any undue risk of advertising who has unpatched servers that are easier targets for hackers to break into, this information would be tightly protected via Facebook's world-renowned privacy settings to avoid it falling into the wrong hands. A related form of gamification we considered was replacing simple certfications with role-playing-game-style Experience Levels. Instead of just knowing an admin passed a test establishing a given level of competency, these would provide recruiters with a more detailed level of how much real-world experience an admin has. Achievements such as the one above would feed into it, but larger numbers of experience points would be gained by tougher or more critical tasks - such as recovering a down system, or migrating a service to a new platform. (As long as it was an Oracle platform of course - migrating to an HP or IBM platform would cause the admin to lose points with us.) Unfortunately, we couldn't figure out a good way to prevent (if you will) “gaming” the system. For instance, a disgruntled admin might decide to start ignoring warnings from FMA that a part is beginning to fail or skip preventative maintenance, in the hopes that they'd cause a catastrophic failure to earn more points for bolstering their resume as they look for a job elsewhere, and not worrying about the effect on your business of a mission critical server going down. More Z's for ZFS Our suggested new feature for ZFS was inspired by the worlds most successful Z-startup of all time: Zynga. Using the Social Network Utility For Facebook described above, we'd tie it in with ZFS monitoring to help you out when you find yourself in a jam needing more disk space than you have, and can't wait a month to get a purchase order through channels to buy more. Instead with the click of a button you could post to your group: Alan can't find any space in his server farm! Can you help? Friends could loan you some space on their connected servers for a few weeks, knowing that you'd return the favor when needed. ZFS would create a new filesystem for your use on their system, and securely share it with your system using Kerberized NFS. If none of your friends have space, then you could buy temporary use space in small increments at affordable rates right there in Facebook, using your Facebook credits, and then file an expense report later, after the urgent need has passed. Universal Single Sign On One thing all the engineers agreed on was that we still had far too many "Single" sign ons to deal with in our daily work. On the web, every web site used to have its own password database, forcing us to hope we could remember what login name was still available on each site when we signed up, and which unique password we came up with to avoid having to disclose our other passwords to a new site. In recent years, the web services world has finally been reducing the number of logins we have to manage, with many services allowing you to login using your identity from Google, Twitter or Facebook. So we proposed following their lead, introducing PAM modules for web services - no more would you have to type in whatever login name IT assigned and try to remember the password you chose the last time password aging forced you to change it - you'd simply choose which web service you wanted to authenticate against, and would login to your Solaris account upon reciept of a cookie from their identity service. Pinning notes to the cloud We also all noted that we all have our own pile of notes we keep in our daily work - in text files in our home directory, in notebooks we carry around, on white boards in offices and common areas, on sticky notes on our monitors, or on scraps of paper pinned to our bulletin boards. The contents of the notes vary, some are things just for us, some are useful for our groups, some we would share with the world. For instance, when our group moved to a new building a couple years ago, we had a white board in the hallway listing all the NIS & DNS servers, subnets, and other network configuration information we needed to set up our Solaris machines after the move. Similarly, as Solaris 11 was finishing and we were all learning the new network configuration commands, we shared notes in wikis and e-mails with our fellow engineers. Users may also remember one of the popular features of Sun's old BigAdmin site was a section for sharing scripts and tips such as these. Meanwhile, the online "pin board" at Pinterest is taking the web by storm. So we thought, why not mash those up to solve this problem? We proposed a new BigAddPin site where users could “pin” notes, command snippets, configuration information, and so on. For instance, once they had worked out the ideal Automated Installation manifest for their app server, they could pin it up to share with the rest of their group, or choose to make it public as an example for the world. Localized data, such as our group's notes on the servers for our subnet, could be shared only to users connecting from that subnet. And notes that they didn't want others to see at all could be marked private, such as the list of phone numbers to call for late night pizza delivery to the machine room, the birthdays and anniversaries they can never remember but would be sleeping on the couch if they forgot, or the list of automatically generated completely random, impossible to remember root passwords to all their servers. For greater integration with Solaris, we'd put support right into the command shells — redirect output to a pinned note, set your path to include pinned notes as scripts you can run, or bring up your recent shell history and pin a set of commands to save for the next time you need to remember how to do that operation. Location service for Solaris servers A longer term plan would involve convincing the hardware design groups to put GPS locators with wireless transmitters in future server designs. This would help both admins and service personnel trying to find servers in todays massive data centers, and could feed into location presence apps to help show potential customers that while they may not see many Solaris machines on the desktop any more, they are all around. For instance, while walking down Wall Street it might show “There are over 2000 Solaris computers in this block.” [Note: this proposal was made before the recent media coverage of a location service aggregrator app with less noble intentions, and in hindsight, we failed to consider what happens when such data similarly falls into the wrong hands. We certainly wouldn't want our app to be misinterpreted as “There are over $20 million dollars of SPARC servers in this building, waiting for you to steal them.” so it's probably best it was rejected.] Harnessing the power of the GPU for Security Most modern OS'es make use of the widespread availability of high powered GPU hardware in today's computers, with desktop environments requiring 3-D graphics acceleration, whether in Ubuntu Unity, GNOME Shell on Fedora, or Aero Glass on Windows, but we haven't yet made Solaris fully take advantage of this, beyond our basic offering of Compiz on the desktop. Meanwhile, more businesses are interested in increasing security by using biometric authentication, but must also comply with laws in many countries preventing discrimination against employees with physical limations such as missing eyes or fingers, not to mention the lost productivity when employees can't login due to tinted contacts throwing off a retina scan or a paper cut changing their fingerprint appearance until it heals. Fortunately, the two groups considering these problems put their heads together and found a common solution, using 3D technology to enable authentication using the one body part all users are guaranteed to have - pam_phrenology.so, a new PAM module that uses an array USB attached web cams (or just one if the user is willing to spin their chair during login) to take pictures of the users head from all angles, create a 3D model and compare it to the one in the authentication database. While Mythbusters has shown how easy it can be to fool common fingerprint scanners, we have not yet seen any evidence that people can impersonate the shape of another user's cranium, no matter how long they spend beating their head against the wall to reshape it. This could possibly be extended to group users, using modern versions of some of the older phrenological studies, such as giving all users with long grey beards access to the System Architect role, or automatically placing users with pointy spikes in their hair into an easy use mode. Unfortunately, there are still some unsolved technical challenges we haven't figured out how to overcome. Currently, a visit to the hair salon causes your existing authentication to expire, and some users have found that shaving their heads is the only way to avoid bad hair days becoming bad login days. Reaction to these ideas After gathering all our notes on these ideas from the engineering brainstorming meeting, we took them in to present to our management. Unfortunately, most of their reaction cannot be printed here, and they chose not to accept any of these ideas as they were, but they did have some feedback for us to consider as they sent us back to the drawing board. They strongly suggested our ideas would be better presented if we weren't trying to decipher ink blotches that had been smeared by the condensation when we put our pint glasses on the napkins we were taking notes on, and to that end let us know they would not be approving any more engineering offsites in Irish themed pubs on the Friday of a Saint Patrick's Day weekend. (Hopefully they mean that situation specifically and aren't going to deny the funding for travel to this year's X.Org Developer's Conference just because it happens to be in Bavaria and ending on the Friday of the weekend Oktoberfest starts.) They recommended our research techniques could be improved over just sitting around reading blogs and checking our Facebook, Twitter, and Pinterest accounts, such as considering input from alternate viewpoints on topics such as gamification. They also mentioned that Oracle hadn't fully adopted some of Sun's common practices and we might have to try harder to get those to be accepted now that we are one unified company. So as I said at the beginning, don't pester your sales rep just yet for any of these, since they didn't get approved, but if you have better ideas, pass them on and maybe they'll get into our next batch of planning.

  Read the article

• alot questings since i wanted to make a new SSB game or mario game(that use 3d models) [closed]

  - by user20465

  i have just started to study programming and i know already ppl will say why make a so big project like as a SSB game for a noob game development? cuz i always wanted a SSB engine like as Mugen is a fighter game engine but is not like as SSB´s gameplay + is not using 3d models too so i will call it SSBmugen(until i find a better title for it i got afew ideas for titles) also i wanted to make this game so it can use SSBbrawl files(models+animations mainly) the moveset+Stage coding files i wanted to redo cuz so anything can be possible like make a teleporter or a pipe teleporter(like as Super mario bros game) on a stag e or make some stuff there is impossible in SSBbrawl for moveset coding but is not in SSBmugen like make so a char. summon a Clone and the clone will do a attack and then is gone or some attacks/moves also i will make a moveset/stage Coding editor so it will be really easy to make moveset/stages coding for yours 3d models/animations moveset+stage Coding i mean: hitboxes/hurtboxes/moving Stuff/moving bones like cape or hair bones that is moving by wind effects or falling or other stuff like that/other stuff that needed to be coded i have planed to make a editor(for moveset/char. coding) or add the editor in brawlbox for my game so other ppl can easy make moveset/stages Coding to they´s models/animations so it will be easy so even kids can make a custom movesets/stages why using SSBbrawl files?: cuz ppl have made alot of models or textures/custom movesets/custom stages like goku/other anime/not brawl stuff for super smash bros brawl hacking(a.k.a modding) so ppl dont have to redo anything if they wanted to have the custom models or textures/custom movesets/custom stages from SSBbrawl to SSBmugen +there is the program named brawlbox that can open brawl files like model/animations and can edit models or animations and import models from 3ds max to be the right model format for SSBbrawl and i also wanted it so easy to add(a.k.a installer) Recolours or alt. models(like as oneslot doctor mario model over mario´s boneset) or textures/Movesets/new char. slots/new stages so easy so you only needing to download themplace them in right foldername them the right nameStart the gameRecolours or alt. models or textures/Movesets/new char. slots/new stages works an loading right so you wont needing to edit any files for add something so kids/not so smart ppl can easy use the mods other ppl is making/uploading for this game here is the file format i wanted to know if they can be readed/opened if making a game that use these files: .mld0(brawl model file) .chr0(model animation for moving/scale/rota the bones) .srt0(animations for texture like moving eyes or blinking) .vis0(Animations for get polygons to hide/show with visibilitybones on the model there is also some polygons there ) .brres(a file format where stuff like model files or textures or animations is inside) .pac(a file format where the .brres is inside to keep model+textures+model for the shadow in 1 file) .wav (for SoundFX effects or voices to char. or stages) i am sure that one is possible the .wav files is inside a other file format for brawl but that file can´t you add more .wav files inside only replace so i wanted the .wav files outside so its easy to add/replace/remove SoundFX effects or voices to char. or stages .brstm(brawl music file so the music is looped perfect so it loop in middel of the music and not start over again then the music is done) afew more file formats (mainly for the Graphics effects like fire/aura/hit effects if not needing to redo them)so only coding in the editor i will make is needed to be done for port a SSBB hack(a.k.a mod)(moveset/stage coding) to this game wanted the game to be able to load these files and load them right like if loading wait1.chr0(idle animation) it will also load at same time wait1.srt0/wait1.vis0 and all kinda of animations is inside the same .brres file i am needing since it to be able to load the file format i wanted cuz: -the animations can´t be converted to any other animation file format and i dont think ppl want to redo these animations(inc. me for Goku to SSBbrawl) -models can be converted but then they lose all the shader/materials stuff like a shine effect or lighting on the model -.brstm can be converted to .wav but then there will be no loop so i prefer it can load this file format too for the music to stage/menu -brawlbox is really easy to use for make animation for the char. and import models from 3ds max so even around "not too stupid" 10 year kids can make SSBB mods(not try to be rude but to say how easy it is) also i wanted the folder setup for characters/stages/moveset/other stuff to be like this: https://www.dropbox.com/s/2oolm5z5ri234tz/SSBmugen%20Folder%20setup.txt just uploaded a txt file since it is a wall of text and this post is already a wall of test so it easy to place stuff (if not i do a program for to that so it auto place the stuff on right place) not 100% sure what to use of game engine to make this possible but i got a dll file from that brawlbox program that can open/read/edit these file formats if that helps i also got open source of brawlbox i have kinda learned programming(since its kinda the same thing but still not 100% same) from Super smash bros modding/hacking like coding a moveset for the new animations/models + have readed alittle about it but i am soon starting for real to study it for ppl who is alittle confuse for what i am asking for here is the list: -what game engine should i use to make a SSB clone? but at same time to make all this stuff i just said possible so ppl can make they own mods and share them and use the already made mods from SSBbrawl? and easy to use aswell so noob programmors can use it? -where to learning programming on internet to be even more ready to make a game like this? and dont wanted to start in the small like making small boring 2d games that no one care about anyway ps. i am also planing a other project like as SSBmugen but it will be Super mario bros open (again tittle unsure but open means open source) i will make a Mario game engine that also use 3d models and can have 2d or 3d gameplay with any mario powerups/gameplay(from any mario platform games) there is ever made multiplayer like as in New super mario bros wii maybe multiplay over lan or online but for now over 1 PC also alittle planed for that to my SSBmugen a Level/world map editor for it too(easy to use so even kids can use it and make levels for it) so it just place the objects/enemies and options for them enemies since they are not 100% same AI in all mario game like to choose a goomba have AI from SM64 the Editor will be able to change the gameplay on a level while have a other gameplay on a other level like this: 1 level have Super mario bros 3 gameplay (then it will be a 3d model remake) a other level have super mario galaxy gameplay but in a Super mario 3d land level yet a other level have super mario 64 gameplay but with powerups from a other mario game like powerups from mario 3d land or can ride on Yoshi so you can easy remake your fav. level from a old mario game in this mario engine/editor or just make a custom one with yours fav. mario gameplay/powerups so it will be like turn off/on: walljump/triple jump/other kinda or jumps/2x punch and 1 kick+Air kick/SMG spin attack/Fludd/other stuff like that so you can make the gameplay from the first mario game to the newest or make custom gameplay on a level also the star(from 64/sunshine/galaxy) will be replaced with the flag from new super mario bros/mario 3d land since the game is not so much about getting stars its more about making/download the levels you wanted and share them to other ppl and play these level so after have killed like the boss from SM64 bomb omb field(if one have made that) you will get the flag instead of star since i wanted it to be simple to make levels in the editor to make the bosses/new enemies/new powerups/custom char. idk what to do to make that simple yet also thinking the mario game will use brawl files since it almost already got all needed animations/models for this since i dont wanted to redo animations/models and if needing more animations i can just make them easy in brawlbox since thats the program i am most used to make animations but that will be after my SSBmugen project if not this game will be easyer then SSBmugen to make since i am planing then 1 of them is done i use the that game as base to make the other (since both is kinda platfrom games and possible using same file format for both) also wanted to ask what is best to start with out of these 2 games? also will maybe make a DLC site(or ingame) for both of these games if they get done so it wont end up like as Mugen where you needing to look all over the internet to find the stuff you wanted but for my game all the mods for my game is on same place not sure about online mode for SSBmugen or super mario bros open but i can always add that then i get better at programming both games also need to have options on controls/if using joystick also that i have planed these game for a long time and got even more ideas for them but first i wanted to get them to work so i can add the other stuff later(like DLC or online mode or some other stuff later) right now i know 0,0001% to programming(in my option) maybe i know more then that since i have been study it alittle but i learning while making stuff like this that was also my plan for make these game learn while making them and get better to programming so again i say it i kinda dont want to hear dont do these projects cuz i already know it will be hard so dont wanted so much to heard stuff like: you can´t do it since you just started learning programming or this project will fail since somewhere i needing to get started with programming and this is where i want to start to make my dream games(possible other´s dream games too) and i dont think this project will fail if i work hard on it (as i possible will) and ppl will maybe help i think this was all my questing/ideas for now (sorry for it sounds more like ideas then questings) but i needing to say my ideas so you ppl can see what i needing to use for make this possible

  Read the article

• CodePlex Daily Summary for Monday, September 17, 2012

  CodePlex Daily Summary for Monday, September 17, 2012Popular ReleasesMetodología General Ajustada - MGA: 03.01.06: Cambios Parmenio: Actualizaciones al formato 2 de programación, se corrigió las vigencias y los estados de los botones. Cambios John: Integración de código con cambios enviados por Parmenio Bonilla. Generación de instaladores. Soporte técnico por correo electrónico y telefónico.Visual Studio Icon Patcher: Version 1.5.1: This fixes a bug in the 1.5 release where it would crash when no language packs were installed for VS2010.WPF Animated GIF: WPF Animated GIF 1.2: Improvements Added support for using the repeat count from GIF metadata (Netscape application block) if the RepeatBehavior is not explicitly specified. If the repeat count can't be found in the metadata, the behavior will default to Forever Note: the default value for the RepeatBehavior property has been changed to 0x (the default value for this type) instead of Forever. This might be a breaking change in some cases. If you need the animation to run forever regardless of the repeat count spe...Layered Architecture Solution Guidance (LASG): LASG 1.0.0.6 for Visual Studio 2012: PRE-REQUISITES Open GAX SQL Server 2008 R2 Management Objects Microsoft Enterprise Library 5.0 (for the generated code) Windows Azure SDK (for layered cloud applications) Silverlight 5 SDK (for Silverlight applications) THE RELEASE This is release only works on Visual Studio 2012. For the Visual Studio 2010 version, please visit here. To read more about the features in this version, please visit here. Take note that LASG is not meant to generate an entire application but just th...DeForm: DeForm v1.1: New javascript client app New effects: brightness, hue, saturationsheetengine - Isometric HTML5 JavaScript Display Engine: sheetengine v1.1.0: This release of sheetengine introduces major drawing optimizations. A background canvas is created with the full drawn scenery onto which only the changed parts are redrawn. For example a moving object will cause only its bounding box to be redrawn instead of the full scene. This background canvas is copied to the main canvas in each iteration. For this reason the size of the bounding box of every object needs to be defined and also the width and height of the background canvas. The example...VFPX: Desktop Alerts 1.0.2: This update for the Desktop Alerts contains changes to behavior for setting custom sounds for alerts. I have removed ALERTWAV.TXT from the project, and also removed DA_DEFAULTSOUND from the VFPALERT.H file. The AlertManager class and Alert class both have a "default" cSound of ADDBS(JUSTPATH(_VFP.ServerName))+"alert.wav" --- so, as long as you distribute a sound file with the file name "alert.wav" along with the EXE, that file will be used. You can set your own sound file globally by setti...MCEBuddy 2.x: MCEBuddy 2.2.15: Changelog for 2.2.15 (32bit and 64bit) 1. Added support for %originalfilepath% to get the source file full path. Used for custom commands only. 2. Added support for better parsing of Media Portal XML files to extract ShowName and Episode Name and download additional details from TVDB (like Season No, Episode No etc). 3. Added support for TVDB seriesID in metadata 4. Added support for eMail non blocking UI testRazor-sharp your skills: CSharp 4.0 Examples: Dynamic word Covariant and contravariant generic type parameters Optional Parameters and Named Arguments Tuples Task Parallel LibraryDECnet 2.0 Router: Second Alpha Release: This second alpha release fixes some bugs and limitations. It has been tested in two DECnet areas and seems to be stable enough for more extensive testing. ThisCrashReporter.NET : Exception reporting library for C# and VB.NET: CrashReporter.NET 1.2: *Added html mail format which shows hierarchical exception report for better understanding.DotNetNuke Search Engine Sitemaps Provider: Version 02.00.00: New release of the Search Engine Sitemap Providers New version - not backwards compatible with 1.x versions New sandboxing to prevent exceptions in module providers interfering with main provider Now installable using the Host->Extensions page New sitemaps available for Active Forums and Ventrian Property Agent Now derived from DotNetNuke Provider base for better framework integration DotNetNuke minimum compatibility raised to DNN 5.2, .NET to 3.5Annoying Manager: 1.0.0.0: Annoying Manager is in beta stage no longer! The main improvement in this release is the task report feature, where users can check their tasks.PDF Viewer Web part: PDF Viewer Web Part: PDF Viewer Web PartIIS Express Manager: IIS Express Manager v 0.5B: Several added features, including adding site and right click menu for sites; which allows you to start/stop site, view it directly in browser etc.Chris on SharePoint Solutions: View Grid Banding - v1.0: Initial release of the View Creation and Management Page Column Selector Banding solution.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.67: Fix issue #18629 - incorrectly handling null characters in string literals and not throwing an error when outside string literals. update for Issue #18600 - forgot to make the ///#DEBUG= directive also set a known-global for the given debug namespace. removed the kill-switch for disregarding preprocessor define-comments (///#IF and the like) and created a separate CodeSettings.IgnorePreprocessorDefines property for those who really need to turn that off. Some people had been setting -kil...Lakana - WPF Framework: Lakana V2: Lakana V2 contains : - Lakana WPF Forms (with sample project) - Lakana WPF Navigation (with sample project)Microsoft SQL Server Product Samples: Database: OData QueryFeed workflow activity: The OData QueryFeed sample activity shows how to create a workflow activity that consumes an OData resource, and renders entity properties in a Microsoft Excel 2010 worksheet or Microsoft Word 2010 document. Using the sample QueryFeed activity, you can consume any OData resource. The sample activity uses LINQ to project OData metadata into activity designer expression items. By setting activity expressions, a fully qualified OData query string is constructed consisting of Resource, Filter, Or...Arduino for Visual Studio: Arduino 1.x for Visual Studio 2012, 2010 and 2008: Register for the forum for more news and updates Version 1209.15 is beta and resolves a number of issues in Visual Studio 2012 and minor debugger fixes for all vs versions. After you have tested a working installation, if you would like to beta the debug tool then email beta at visualmicro.com. Version 1208.19 (click the downloads tab) is considered stable for visual studio 2010 and 2008. Key Features of 1209.10 Support for Visual Studio 2012 (.NET 4.5) Debug tools beta team can re-e...New ProjectsApertium.NET: This is a Windows 8 library to use Apertium easelyAsyncFtp: AsyncFtp is a library, which enables support for async ftp transactions in .NET Framework.Computer Club System: Computer Club System - designed to manage client machines in a computer club.Dynamic Time Warp for Time Series Analysis: This is a conversion to C# of Stan Salvador, Philip Chan Fast DTW algorithm originally implemented in Java. G.Controls: win8 ????????htmlhelp: ??????????????HtmlMaker: ?html?????if、for、foreach??????????，????c#???，????????html??。 ??????，?????????~~JsonSerializerLite: JsonSerializerLite is a C#.NET library that aims to be a compliant, easy-to-use and lightweight JSON serializer/deserializer. Launchbar: Access all your favorite applications at lightning speed.LP 2012: Calculates football stats and predicts the winners. This is a closed project at the moment. We are not asking for any help.Malibu Project: to be definedPersonal Family Record System: In April, 2012, person family information management project was begun. This is a project for K14T students of Van Lang University. PPCalc: ProPoints/WeightWatchers points calculator for Windows 8.SA Plugins: The code available in this project is open source, the know-how is not, sorry.SapientS School Management System: This is a software to manage a Advanced level classes of a school in a efficient manner.Sonar: Sonar is .NET ORM written in C# 4.0VB.net: Project này là c?a nhóm Tùng và Phu?c cùng làm v? nh?ng ?ng d?ng qu?n lýWebser Web Browser: One of the worlds most basic browsers ever designed. Its nice on the eyes and can get you surfing the web in less than five minutes.

  Read the article

• SVN Server not responding

  - by Rob Forrest

  I've been bashing my head against a wall with this one all day and I would greatly appreciate a few more eyes on the problem at hand. We have an in-house SVN Server that contains all live and development code for our website. Our live server can connect to this and get updates from the repository. This was all working fine until we migrated the SVN Server from a physical machine to a vSphere VM. Now, for some reason that continues to fathom me, we can no longer connect to the SVN Server. The SVN Server runs CentOS 6.2, Apache and SVN 1.7.2. SELinux is well and trully disabled and the problem remains when iptables is stopped. Our production server does run an older version of CentOS and SVN but the same system worked previously so I don't think that this is the issue. Of note, if I have iptables enabled, using service iptables status, I can see a single packet coming in and being accepted but the production server simply hangs on any svn command. If I give up waiting and do a CTRL-C to break the process I get a "could not connect to server". To me it appears to be something to do with the SVN Server rejecting external connections but I have no idea how this would happen. Any thoughts on what I can try from here? Thanks, Rob Edit: Network topology Production server sits externally to our in-house SVN server. Our IPCop (?) firewall allows connections from it (and it alone) on port 80 and passes the connection to the SVN Server. The hardware is all pretty decent and I don't doubt that its doing its job correctly, especially as iptables is seeing the new connections. subversion.conf (in /etc/httpd/conf.d) LoadModule dav_svn_module modules/mod_dav_svn.so <Location /repos> DAV svn SVNPath /var/svn/repos <LimitExcept PROPFIND OPTIONS REPORT> AuthType Basic AuthName "SVN Server" AuthUserFile /var/svn/svn-auth Require valid-user </LimitExcept> </Location> ifconfig eth0 Link encap:Ethernet HWaddr 00:0C:29:5F:C8:3A inet addr:172.16.0.14 Bcast:172.16.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe5f:c83a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:32317 errors:0 dropped:0 overruns:0 frame:0 TX packets:632 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2544036 (2.4 MiB) TX bytes:143207 (139.8 KiB) netstat -lntp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 1484/mysqld tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1135/rpcbind tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1351/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 1230/cupsd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1575/master tcp 0 0 0.0.0.0:58401 0.0.0.0:* LISTEN 1153/rpc.statd tcp 0 0 0.0.0.0:5672 0.0.0.0:* LISTEN 1626/qpidd tcp 0 0 :::139 :::* LISTEN 1678/smbd tcp 0 0 :::111 :::* LISTEN 1135/rpcbind tcp 0 0 :::80 :::* LISTEN 1615/httpd tcp 0 0 :::22 :::* LISTEN 1351/sshd tcp 0 0 ::1:631 :::* LISTEN 1230/cupsd tcp 0 0 ::1:25 :::* LISTEN 1575/master tcp 0 0 :::445 :::* LISTEN 1678/smbd tcp 0 0 :::56799 :::* LISTEN 1153/rpc.statd iptables --list -v -n (when iptables is stopped) Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination iptables --list -v -n (when iptables is running, after one attempted svn connection) Chain INPUT (policy ACCEPT 68 packets, 6561 bytes) pkts bytes target prot opt in out source destination 19 1304 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:80 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 17 packets, 1612 bytes) pkts bytes target prot opt in out source destination tcpdump 17:08:18.455114 IP 'production server'.43255 > 'svn server'.local.http: Flags [S], seq 3200354543, win 5840, options [mss 1380,sackOK,TS val 2011458346 ecr 0,nop,wscale 7], length 0 17:08:18.455169 IP 'svn server'.local.http > 'production server'.43255: Flags [S.], seq 629885453, ack 3200354544, win 14480, options [mss 1460,sackOK,TS val 816478 ecr 2011449346,nop,wscale 7], length 0 17:08:19.655317 IP 'svn server'.local.http > 'production server'k.43255: Flags [S.], seq 629885453, ack 3200354544, win 14480, options [mss 1460,sackOK,TS val 817679 ecr 2011449346,nop,wscale 7], length 0

  Read the article

• Object array updates one instance repeatedly [on hold]

  - by MGN001

  I'm making a 2D shooter, and the player object holds an array of bullets that represent how many shots the player can have on screen at once. At least, this is what I'm trying for. What's happening is that each time any of the objects in the array is called, it seems to update a single object in memory. So, if I fire and then fire again, the object "starts over" from where I shot from and moves twice as fast. I've spent weeks trying to fix this and I've managed nothing. Hopefully another pair of eyes will see something I've missed. Player.cpp #include "Player.h" const int startLives = 3; const int maxHealth = 2; const float speed = 1; const int maxVelocity = 500; const int topBound = WINDOW_HEIGHT / 5 * 3; const int slowRate = 500; const int accRate = 1000; const int maxBullets = 5; const float spriteWidth = 99; const float spriteHeight = 75; const Vector2f startPosition = { (WINDOW_WIDTH / 2) - (spriteWidth / 2), (WINDOW_HEIGHT / 4 * 3) - (spriteHeight / 2) }; Bullet bullets[maxBullets]; Bullet * bulletPointers[maxBullets]; SDL_Texture * playerHealthy; SDL_Texture * playerDamaged; SDL_Texture * currentSprite; SDL_Rect * rect; Vector2f position; Vector2f velocity; int Health; int Lives; Player::Player() { rect = new SDL_Rect(); } Player::~Player() { SDL_DestroyTexture(playerHealthy); SDL_DestroyTexture(playerDamaged); SDL_DestroyTexture(currentSprite); rect = NULL; } void Player::Initialize(SDL_Renderer * renderer) { SDL_Surface * temp; temp = IMG_Load(".\\Sprites\\player.png"); if (temp == NULL) { printf("Initialization Error: %s\n", IMG_GetError()); exit(PLAYER_INITIALIZATION_ERROR); } playerHealthy = SDL_CreateTextureFromSurface(renderer, temp); temp = IMG_Load(".\\Sprites\\playerDamaged.png"); if (temp == NULL) { printf("Initialization Error: %s\n", IMG_GetError()); exit(PLAYER_INITIALIZATION_ERROR); } playerDamaged = SDL_CreateTextureFromSurface(renderer, temp); temp = IMG_Load(".\\Sprites\\laserGreen.png"); if (temp == NULL) { printf("Initialization Error: %s\n", IMG_GetError()); exit(PLAYER_INITIALIZATION_ERROR); } SDL_Texture * bullet = SDL_CreateTextureFromSurface(renderer, temp); temp = IMG_Load(".\\Sprites\\laserGreenShot.png"); if (temp == NULL) { printf("Initialization Error: %s\n", IMG_GetError()); exit(PLAYER_INITIALIZATION_ERROR); } SDL_Texture * explosion = SDL_CreateTextureFromSurface(renderer, temp); for (int i = 0; i < maxBullets; i++) { bullets[i].Initialize(renderer, bullet, explosion); bulletPointers[i] = NULL; } temp = NULL; rect->h = spriteHeight; rect->w = spriteWidth; Reset(); } void Player::Update(Input input, float deltaTime) { if (abs(velocity.x) < slowRate * deltaTime) { velocity.x = 0; } else if (velocity.x > 0) { velocity.x -= slowRate * deltaTime; } else if (velocity.x < 0) { velocity.x += slowRate * deltaTime; } if (abs(velocity.y) < slowRate * deltaTime) { velocity.y = 0; } if (velocity.y > 0) { velocity.y -= slowRate * deltaTime; } else if (velocity.y < 0) { velocity.y += slowRate * deltaTime; } if (Health <= 0) { --Lives; Spawn(); } velocity.x += UnitVector(input.InputNew.movement).x * accRate * deltaTime; velocity.y += UnitVector(input.InputNew.movement).y * accRate * deltaTime; if (Magnitude(velocity) > maxVelocity) { velocity.x = UnitVector(velocity).x * maxVelocity; velocity.y = UnitVector(velocity).y * maxVelocity; } position.x += velocity.x * deltaTime * speed; position.y += velocity.y * deltaTime * speed; if (input.InputNew.JumpLeft && !input.InputOld.JumpLeft) { position.x -= spriteWidth; } if (input.InputNew.JumpRight && !input.InputOld.JumpRight) { position.x += spriteWidth; } Boundaries(); rect->x = position.x; rect->y = position.y; if (input.InputNew.Fire && !input.InputOld.Fire) { Fire(); } for (int i = 0; i < maxBullets; ++i) { if (bulletPointers[i] != NULL) { bullets[i].Update(deltaTime); if (bullets[i].getPosition().y < -33) { bulletPointers[i] = NULL; } } } } void Player::Draw(SDL_Renderer * renderer) { for (int i = 0; i < maxBullets; ++i) { if (bulletPointers[i] != NULL) { bullets[i].Draw(renderer); } } SDL_RenderCopy(renderer, currentSprite, NULL, rect); } void Player::Spawn() { position = startPosition; Health = maxHealth; currentSprite = playerHealthy; rect->x = position.x; rect->y = position.y; } void Player::Boundaries() { if (position.x < 0) { position.x = 0; velocity.x *= -1; } else if (position.x > WINDOW_WIDTH - spriteWidth) { position.x = WINDOW_WIDTH - spriteWidth; velocity.x *= -1; } if (position.y < topBound) { position.y = topBound; velocity.y *= -1; } else if (position.y > WINDOW_HEIGHT - spriteHeight) { position.y = WINDOW_HEIGHT - spriteHeight; velocity.y *= -1; } } int Player::getLives() { return Lives; } void Player::Reset() { Lives = startLives; Spawn(); } void Player::Fire() { for (int i = 0; i < maxBullets; ++i) { if (bulletPointers[i] == NULL) { bulletPointers[i] = &bullets[i]; bullets[i].Fire(position,velocity.x/2); break; } } } Bullet.cpp #include "Bullet.h" const int speed = 500; Vector2f bulletVelocity; float ExplosionMax = 0.5f; float ExplosionTimer; const Vector2f fireOffset = { 45.5f, 10.0f }; const Vector2f explosionOffset = { 23.5f, -27.0f }; const Vector2i bulletSize = { 9, 33 }; const Vector2i explosionSize = { 56, 54 }; Vector2f bulletPosition; SDL_Texture * bulletSprite; SDL_Texture * explosionSprite; SDL_Texture * bulletCurrentSprite; SDL_Rect * bulletRect; Bullet::Bullet() { } Bullet::~Bullet() { } void Bullet::Initialize(SDL_Renderer * renderer, SDL_Texture * bullet, SDL_Texture * explosion) { bulletSprite = bullet; explosionSprite = explosion; bulletRect = new SDL_Rect(); } void Bullet::Update(float deltaTime) { bulletPosition.y -= bulletVelocity.y * deltaTime; bulletPosition.x += bulletVelocity.x * deltaTime; bulletRect->x = static_cast<int>(bulletPosition.x); bulletRect->y = static_cast<int>(bulletPosition.y); } void Bullet::Draw(SDL_Renderer * renderer) { SDL_RenderCopy(renderer, bulletCurrentSprite, NULL, bulletRect); } void Bullet::Fire(Vector2f pos, float xSpeed) { bulletPosition.x = pos.x + fireOffset.x; bulletPosition.y = pos.y + fireOffset.y; bulletVelocity.x = xSpeed; bulletVelocity.y = speed; bulletCurrentSprite = bulletSprite; bulletRect->h = bulletSize.y; bulletRect->w = bulletSize.x; bulletRect->x = static_cast<int>(bulletPosition.x); bulletRect->y = static_cast<int>(bulletPosition.y); } Vector2f Bullet::getPosition() { return bulletPosition; } void Bullet::Hit() { bulletCurrentSprite = explosionSprite; bulletVelocity = { 0.0f, 0.0f }; ExplosionTimer = ExplosionMax; bulletPosition.x += explosionOffset.x; bulletPosition.y += explosionOffset.y; bulletRect->w = explosionSize.x; bulletRect->h = explosionSize.y; }

  Read the article

< Previous Page | 24 25 26 27 28 29 30  | Next Page >