Search Results

Search found 1298 results on 52 pages for 'ssd'.

Page 28/52 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Is it safe to use consumer MLC SSDs in a server?

    - by Zypher
    We (and by we I mean Jeff) are looking into the possibility of using Consumer MLC SSD disks in our backup data center. We want to try to keep costs down and usable space up - so the Intel X25-E's are pretty much out at about 700$ each and 64GB of capacity. What we are thinking of doing is to buy some of the lower end SSD's that offer more capacity at a lower price point. My boss doesn't think spending about 5k for disks in servers running out of the backup data center is worth the investment. Just how dangerous of an approach is this and what can be done to mitigate these dangers?

    Read the article

  • Using a CF card as an IDE HDD

    - by dartacus
    I have an old Sony laptop (Vaio TR1-MP) that I like. The HDD has died and since it's a hard-to-find 1.8" IDE hard drive I'm considering buying one of those little CF card adaptors and a 16gb CF card. The total cost of that is about £30 and replacement HDDs for this model are far pricier. Has anyone replaced their HDD with a CF card in this way, and, crucially, is the performance utterly horrible afterwards? ;-) I've seen a couple of threads which hint it's possible but the advice eventually given was just to buy a SSD, but I'm not even sure if its possible to get a 1.8" SSD with an IDE connector that'll fit my laptop. (I freely admit that the most sensible thing to do would be to bin it and just buy a cheap netbook which would be smaller, faster and lighter than the sony, but it does have a very nice widescreen display and dammit I just like it !) Thanks, G

    Read the article

  • How to delete old pagefile.sys and hiberfile.sys on secondary disk (old windows install)

    - by Silvermist
    A while ago I swapped my main hard disk for a SSD. Now the old one is used as a secondary hard disk, and my OS is a fresh windows install on the main SSD disk. Nevertheless, there are still huge pagefile.sys and hiberfile.sys on that secondary hard drive. Those are not the ones used by the current windows, as those do exist on C:. I tried to attrib -s -h them, but it refused with "Access denied". Any idea how to delete those old unused system files and reclaim the space?

    Read the article

  • Developing and implementing a testing plan for a software app deployed on a web server

    - by Abhzoo
    A company in the USA is building a new Web App that will be offered SaaS to customers and the development is being done by a software development team located in a different country(India). They are about to take delivery of a first demo to provide live feedback to the team in India. The overseas team requires a cloud server (Windows + SQL Standard, 8GB Ram, 8 vCPUs, 40GB SSD system disk, 80GB SSD data disk, 1600Mb/s network bandwidth) to serve as a tester server. When the tester is setup the team will install the app on the test server to get live feedback. Q:Explain in detail how you will develop and implement a testing plan for the software App. Be sure to explain the specifics. PLEASE HELP, NEED ANSWER ASAP

    Read the article

  • Best idea dataserver serving small pictures 40 ko

    - by Nicolas Manzini
    I'm designing the server structure for my application in case things go well. I have one server DB connected to multiple server who process connections. All those with lots of RAM and fast processors. (still looking for a way to use the multithread because now it's dumb apache php... so loooots of ram needed). Upon an answer from those servers, the client can then connect to another server to retrieve pictures using the address he previously got from the db. Is it a good idea to have one database server with let's say nginx and ssd disk having to send all pictures to everybody? or should I have multiple server accessing to a shared ssd disk drive or multiple disk updating each other? Also should I put a lot of RAM on the database server? because probably there wont be a picture more popular than another.

    Read the article

  • Activating Windows 7 generates error code 0xc004F061

    - by Jon
    I got a new SSD and wanted to start over with Windows 7 on that disk. I did a clean install (my mistake) on the SSD and just went passed the activation part (left the key blank). Now that I have my system all setup, configured, files pulled back from backup, and ready to go, I'd like to activate Windows 7. However, I now get this error: The following failure occurred while trying to use the product key: Code: 0xC004F061 Description: The Software Licensing Service determined that this specified product key can only be used for upgrading, not for clean installations. Do I really need to wipe my system again, install Windows Vista, and then do the Windows 7 upgrade in order to use my upgrade key? Is there some kind of work around?

    Read the article

  • Windows 7 strange boot issue

    - by JL
    Recently I installed an SSD drive, its now my primary boot drive (OCZ Vertex Turbo 60GB). I'm running Win 7 (64bit). Now I am not sure exactly where the fault lies, but when I do a restart from within Windows, the computer will boot and enter into the loading windows portion, however won't progress beyond there. My solution is to manually hit the reset switch, and then when it boots it enters into a windows menu that offers a start up repair or start windows normally. I select start windows normally, and then it boots fine. I am not entirely sure why I can't just restart the computer from windows normally though. The SSD drive works perfectly, and not even sure if it is the cause to this problem. Any ideas on this?

    Read the article

  • Weird nfs performance: 1 thread better than 8, 8 better than 2!

    - by Joe
    I'm trying to determine the cause of poor nfs performance between two Xen Virtual Machines (client & server) running on the same host. Specifically, the speed at which I can sequentially read a 1GB file on the client is much lower than what would be expected based on the measured network connection speed between the two VMs and the measured speed of reading the file directly on the server. The VMs are running Ubuntu 9.04 and the server is using the nfs-kernel-server package. According to various NFS tuning resources, changing the number of nfsd threads (in my case kernel threads) can affect performance. Usually this advice is framed in terms of increasing the number from the default of 8 on heavily-used servers. What I find in my current configuration: RPCNFSDCOUNT=8: (default): 13.5-30 seconds to cat a 1GB file on the client so 35-80MB/sec RPCNFSDCOUNT=16: 18s to cat the file 60MB/s RPCNFSDCOUNT=1: 8-9 seconds to cat the file (!!?!) 125MB/s RPCNFSDCOUNT=2: 87s to cat the file 12MB/s I should mention that the file I'm exporting is on a RevoDrive SSD mounted on the server using Xen's PCI-passthrough; on the server I can cat the file in under seconds ( 250MB/s). I am dropping caches on the client before each test. I don't really want to leave the server configured with just one thread as I'm guessing that won't work so well when there are multiple clients, but I might be misunderstanding how that works. I have repeated the tests a few times (changing the server config in between) and the results are fairly consistent. So my question is: why is the best performance with 1 thread? A few other things I have tried changing, to little or no effect: increasing the values of /proc/sys/net/ipv4/ipfrag_low_thresh and /proc/sys/net/ipv4/ipfrag_high_thresh to 512K, 1M from the default 192K,256K increasing the value of /proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_max to 1M from the default of 128K mounting with client options rsize=32768, wsize=32768 From the output of sar -d I understand that the actual read sizes going to the underlying device are rather small (<100 bytes) but this doesn't cause a problem when reading the file locally on the client. The RevoDrive actually exposes two "SATA" devices /dev/sda and /dev/sdb, then dmraid picks up a fakeRAID-0 striped across them which I have mounted to /mnt/ssd and then bind-mounted to /export/ssd. I've done local tests on my file using both locations and see the good performance mentioned above. If answers/comments ask for more details I will add them.

    Read the article

  • Use Windows 7 offline sync with external usb hd

    - by René
    Yeah, truly the whole question in the header. Is there a way to use Windows 7 offline sync (which we know from network mapped drives) with a external usb hd? When not, are there similar built in tools or good third party tools? My scenario: I want to buy a ultrabook with SSD which is mostly limited in space. So I'm going to put all files to a external HD and only store current projects on the local SSD. Let's say I have to change project. It would be easy just change sync folders and have the second project synced to my hd too. With network mapped drives it's such easy. Paths do not differ if the drive is offline so in most situations you don't take notice if the folder is offline. And you only have to activate offline file for the folders you courrently need for work. So is there a similar solution for usb hard drives?

    Read the article

  • Running RAID on an internal storage drive

    - by Johnny W
    I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to put my documents on a "normal" HD running under RAID 1. I have four SATA 3GB/s ports on my motherboard (my Windows 8 SSD drive in on a different 6GB/s controller). All four are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive. In my BIOS I can only change settings for the entire controller, not just ports. So my question is: If I turn these four ports into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will a HD or Bluray drive be slower/incompatible with being plugged into a non AHCI SATA port? Thanks.

    Read the article

  • How to uninstall AMD Display Driver from other install of Windows

    - by nar
    So my Windows 7 had a BSOD from an Ati driver file then restarting only gives me some wierd coloured lines at the top of the screen. Starting in safe mode causes the boot up to freeze at AtiPcie.sys and overlays the same coloured lines on the safe mode start up display. It seems to be a problem with the display driver but I can't get into the OS at all to uninstall it. Luckily I have an old install of Windows 7 from when I moved to a SSD still on my HDD and that runs just fine so I'm pretty sure its a software problem (Maybe the SSD corrupted a driver file or something). So does anyone know how I can uninstall the driver files from another Windows 7 install on the same PC? EDIT: What I mean is, I'm running on the broken PC right now but using a different HDD's windows install. I have full access to the not booting up OS drive with the Windows so I can delete any files/load the registry etc...

    Read the article

  • What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

    - by Tyler
    Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

    Read the article

  • How to move a windows machine properly from RAID 1 to raid 10? [migrated]

    - by goober
    Goal I would like to add two more hard drives to my current RAID 1 setup and create a RAID 0 setup on top of the two RAID 1 setups (which I believe is referred to as "RAID 10"). Components Involved Intel P68 Chipset Motherboard 4 SATA ports that can be configured for Raid An intel SSD cache that sits in front of the RAID, and a 64 GB SSD configured in that manner Two 1TB HDDs configured in RAID 1 OS: Windows 7 Professional Resources Consulted so far I found a great resource on LinuxQuestions.org for a good "best practices" process for Linux machines, but I'd like to develop a similar process that I know works on Windows Machines.

    Read the article

  • How to install RAID drivers on already installed Windows 7?

    - by happysencha
    64-bit Windows 7 Ultimate 6GB RAM Intel i7 920 Intel X25-M SSD 80GB 2,5" Club 3D Radeon HD5750 GA-EX58-UD4P Motherboard I've been running fine with Windows 7 installed on the SSD. I wanted to create an mirrored Raid-1 setup for backups using two hard disks, so I ordered two Samsung HD203WI. This motherboard supports two different RAID controllers, the Intel's ICH10R and Gigabyte's SATA2 SATA controller. There are 6 SATA ports behind the ICH10R and 2 SATA ports for the Gigabyte controller. I googled around and seemed that the ICH10R is a better choice and since then I've been trying to make it work. When I activate the [RAID] mode from BIOS, the Windows 7 gives BSOD exactly as described by this guy: "Windows 7 will start to boot, it gets to the screen where there are 4 colors coming together and it blue screens and restarts no matter what I do." First thing I did: turned off the RAID and booted to Windows and tried to install the SATA RAID drivers from Gigabyte. I launch the driver installation program and it gives "This computer does not meet the minimum requirements for installing the software" error. I then tried Intel's Rapid Storage Technology drivers (which apparently is the same as the one offered at Gigabyte's site), but it resulted in exactly the same error. I then detached the new Samsung hard disks from the SATA ports, but left the [RAID] enabled in BIOS. To my surprise, it still BSOD'd, so at this point I knew it is an OS/driver issue. Also, I tried with the Gigabyte's RAID enabled (while the ICH10R RAID disabled) and it booted just fine. So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed." So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks. I mean why would I need to re-install operating system to add RAID setup?

    Read the article

  • Empty MacBook Pro, no SuperDrive. How do I install Windows?

    - by MCcz
    My situation is this: HDD1: Empty 180 GB SSD HDD2: Empty 500 GB HDD (instead of SuperDrive) Accessories: Windows 8 ISO 64 Gig USB stick Second computer SuperDrive in USB enclosure What I need: Install Windows 8 on the SSD in the laptop What I tried: Create bootable USB – Doesn't work. Macbook doesnt show me USB as an option after holding OPTION key. Install Windows through SuperDrive connected via USB – Doesn't work. On the internet, there are thousands of articles telling me all kinds of solutions, expecting me to have Mac OS on my laptop. Is there any solution to this?

    Read the article

  • Booting an EXT4 image file from GRUB2

    - by sjjg
    My friend needed a fast HDD so I gave her my small 64GB SDD. This SSD had my Linux install on it. I used dd to make an image of the partition (boot, root and home on one partition). This partition is now sitting on a traditional 500GB EXT4 formatted drive. Is there any way I can get GRUB to just boot using this .img file I have? I'm not getting my SSD back and I can't be bothered to go through the hassle of setting up my Linux install from scratch. I have come across loopback support in GRUB for ISO images. Does this support EXT4 also? I don't seem to be able to find anything specific and don't want to trash anything. Cheers.

    Read the article

  • Disk Management

    - by Mars
    I'd like to know what's with all those unnamed drives. I've always thought they are what they say they are (recoveries and what not), why are there so many of them? and why do they all say 100% Free (i.e. they're all empty!). If that's the case, what happened to my recovery? Info: I'm on Dell Inspiron 7520 Windows 8 Single Language (Had Kali installed on SSD a couple of days ago, now I've just deleted that and will install Kali on VM on SSD, that's drive (S:). Screenshot (don't have enough reputation): https://www.dropbox.com/s/y8a1mfkycd5grhq/Screenshot%202014-06-08%2012.06.38.png

    Read the article

  • How to move partition with Users to a new SATA controller?

    - by Al Kepp
    Our current situation: X79 chipset. Windows 7 installed on SATA SSD running on Marvell controller. C:\Users contains just Public and computer-name folders, all the other users are created in E:\Users. That partition is on two HDD's running on an Intel RAID controller. (The motherboard has got two SATA/RAID onboard controllers.) The goal is: Without reinstallation, I want to move SSD to a standard SATA controller. Then I want to get rid of RAID1, and move one HDD to the same internal Intel SATA controller and the current E:\Users move to that new place. I want it to stay as E:\users, but I need to reinstall the HDD to let it work in SATA mode without RAID. So I face several problems. I am sure all are solvable with free software utilities, but I don't know how exactly to do it. I can see the particular problems: I have got all users at E:\Users. When I turn off that E:\ disk, I won't be able to login to Windows. I need at least one admin account to be placed back at C:\users. The current C: runs on standard 120 GB SSD, but it is connected to a Marvell SATA/RAID controller. I am affraid the Windows won't let me put it to Intel SATA controller due to hardware/licence check, and I won't be able to use standard W7 recovery disk either, because there probably isn't marvel SATA/RAID driver on it. I haven't tried anything yet, because I am affraid I can end up with computer not working at all. (I want to move it to a standard ICH10 Intel SATA controller to let us have no problems in future with it. I think it is not very safe when we use any nonstandard hardware to boot the computer.) I need to somehow backup current E:\ disk and restore it to a new E:. I hope this will be the easy part (as long as the admin account will reside on C:). The E: RAID array is very large, but it is almost empty (less than 100 GB of data.) So I can make the partition smaller so it can easily fit to a single SATA HDD.

    Read the article

  • Remove dual boot screen

    - by DoubleP90
    some time ago i bought an SSD and since i had to reinstall windows i bought windows 8 with it. I kept windows 7 on my old HDD and i installed Windows 8 on the SSD. For some time i had both, and a dual boot screen would allow me to switch between them. But now i deleted the windows 7 partition and merged it to the partition where i keep all my files, movies etc. But i still have the dual boot screen showing up with windows 8 and windows 7 options. How can i remove the dual boot screen and just make it boot to windows 8?

    Read the article

  • Setup for NEW HDD?

    - by Ed Markey
    Building my FIRST computer. Will start with at least - one HDD, I purchased a WD SATA HDD a 10,000RPM VelociRaptor 500GB. I have read that if you use one of the settings, can't remember what it's called, that it would make an HDD rund at IDE speeds??? Could I or should I run it in RAID instead? Is RAID only for more than one HDD/ssd? I would like to get like a 64GB SSD later to maybe speed things up working together. Thanks

    Read the article

  • Deleting Windows 8 install

    - by Yann4
    I have a windows 7 pc, and I had installed windows 8 on an SSD, so it was the only partition on that SSD. I've now realised that I never use it, so I went to uninstall it and followed these steps. The PC now boots into 7, as expected, however I can't delete or format the drive that has windows 8 on it. The format dropdown selection is greyed out, and I tried to just simply delete all of the files and use the disk as is, but as windows 8 isn't there, I no longer have rights to delete all of the files, apparently. The drive in question has 3 partitions, one that I made for the win8 system, and 2 smaller system-created partitions (one 300MB recovery and 1 100MB EFI) How do I go about formatting the drive?

    Read the article

  • permanently mount multiple directories from different disks under root [on hold]

    - by piotrek
    I have SSD and HDD. Some directories like /var /srv /tmp should be on hdd while /boot /usr /lib on ssd. But do I have to create separate partition for every single directory? i want to have 2 or so partitions. one for each disk and distribute directories as needed. is it possible? and how? i've heard about symlinks, mount --bind, mhddfs but: symlinks are treated differently by tools like cp so i'm not sure if it's safe to have main system directories symlinked i have no idea how can I use mount --bind or mhddfs in fstab

    Read the article

  • Event on SQL Server 2008 Disk IO and the new Complex Event Processing (StreamInsight) feature in R2

    - by tonyrogerson
    Allan Mitchell and myself are doing a double act, Allan is becoming one of the leading guys in the UK on StreamInsight and will give an introduction to this new exciting technology; on top of that I'll being talking about SQL Server Disk IO - well, "Disk" might not be relevant anymore because I'll be talking about SSD and IOFusion - basically I'll be talking about the underpinnings - making sure you understand and get it right, how to monitor etc... If you've any specific problems or questions just ping me an email [email protected]. To register for the event see: http://sqlserverfaq.com/events/217/SQL-Server-and-Disk-IO-File-GroupsFiles-SSDs-FusionIO-InRAM-DBs-Fragmentation-Tony-Rogerson-Complex-Event-Processing-Allan-Mitchell.aspx 18:15 SQL Server and Disk IOTony Rogerson, SQL Server MVPTony's Blog; Tony on TwitterIn this session Tony will talk about RAID levels, how SQL server writes to and reads from disk, the effect SSD has and will talk about other options for throughput enhancement like Fusion IO. He will look at the effect fragmentation has and how to minimise the impact, he will look at the File structure of a database and talk about what benefits multiple files and file groups bring. We will also touch on Database Mirroring and the effect that has on throughput, how to get a feeling for the throughput you should expect.19:15 Break19:45 Complex Event Processing (CEP)Allan Mitchell, SQL Server MVPhttp://sqlis.com/sqlisStreamInsight is Microsoft’s first foray into the world of Complex Event Processing (CEP) and Event Stream Processing (ESP).  In this session I want to show an introduction to this technology.  I will show how and why it is useful.  I will get us used to some new terminology but best of all I will show just how easy it is to start building your first CEP/ESP application.

    Read the article

  • Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

    - by Alkatraz
    windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >