Search Results

Search found 4343 results on 174 pages for 'verizon wireless'.

Page 28/174 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• Wireless router not connection -> AP Not associated

  - by candido

  I can not connect to internet by wireless router after some months with ubuntu 10.04. I can connect with the same portable but with win OS. My SO is ubuntu 10.04 linux 2.6.32-41 arch SMP i686. The internet wireless network controller is Atheros AR9285 chipset (pci express) Kernel module ath9k I have tried a command line connection: $ sudo /etc/init.d/network-manager stop #stop gui network manager $ iwconfig wlan0 essid WLAN_3C key s:C001D20550B3C $ ifconfig Access Point: NOT-ASSOCIATED $dmesg ... AP 00:1a:2b:08:60:49 associated Is the SO has connected to router for booting long ( associated message), after boot and login why the connection to router is not possible by network-manager or command line (NOT associated message)? Thanks in advance

  Read the article

• Dell Latitude E6400 power button and wireless not working or only working intermittently

  - by Droid

  The power button on the laptop stopped working randomly as of a day or two ago. I can only power the laptop on if its attached to a docking station, on which I can use the power button to turn on/off the laptop. Today the wireless card stopped working (the wifi light does not turn on, even after I turn on the wireless switch). What is the problem and how can I fix it? The laptop is about 1 year old. I have not dropped it, but do carry it around a good amount, including docking it/undocking it frequently.

  Read the article

• Setting a wireless access point on Ubuntu server 11.10

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• Configuring Wireless Network

  - by Vinod K

  I have vyataa router on VMware with 2 interfaces eth0 and eth1 eth0 is facing the internet eth0 is in Nat mode with dhcp on eth1 is in bridged mode with my ethernet with ip 10.0.2.34/24 The ethernet card is at ip 10.0.2.95/24 i have defined the nat rule. Hence internet is available at eth1 too. Now i am connecting a wireless router at "eth1" iball router, I have connected the router using a cable to the ethernet interface of my laptop. I have configured the WAN connection type as "Static IP" and given "10.0.2.34/24" All the clients that connect using wireless router cannot connect to the internet though. Could anyone provide me a solution for this.. Thank You!!

  Read the article

• I have a wireless Canon P560 and my computer can't find it

  - by ed

  The printer is wireless and I haven't connected it via USB. I set the configurations for the Wi-Fi access point in the printer and it connected to my Wi-Fi. I have AT&T as the service provider and the 2Wire router. When I access the router in the browser I see that the printer is connected but when I run the software to detect the printer the computer can't find it. I have a Mac with Snow Leopard. I tried to detect the printer with another device and it can't find it. Is there a port that needs to be open for wireless printers? Because I tried putting the routers firewall settings for the device to its lowest and the computer still can't find it. Let me know. Thnx.

  Read the article

• Lenovo tools for windows 7: can't re-enable wireless

  - by pcampbell

  Consider a netbook - Lenovo S10e with Windows 7 and the S10 Lenovo power management tools. Machine has factory BIOS. Fn+F5 is the key combo to toggle the wireless radio on/off. The tool allows the disabling fine; works as expected. The problem is that the re-enable doesn't work, or is confusing on how to re-enable. Previously tried without success: Fn-F5 Fn-Ctrl-F5 Fn-Shift-F5 Fn-Alt-F5 Here's the onscreen display: Question: How can you re-enable the wireless radio using the Function key on a Lenovo netbook?

  Read the article

• Internet wireless connected with limited access, windows vista

  - by Wawa wiya

  Hello I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• recommendations for wireless ergonomic keyboards

  - by oo

  i am looking for a good wireless ergonomic keyboard and wanted to get some feedback.

  Read the article

• is there a way to prevent network manager from storing the password for a wireless network

  - by tolomea

  Our corporate wireless network uses continuously changing passwords with RSA tokens. So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked. Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked. Is there some way to prevent it from storing my password for that network? Or perhaps someway to get the gnome keyring to not store it?

  Read the article

• Keeping the wireless connected.

  - by casr

  I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

  Read the article

• VMware Fusion on MacBook Pro running Vista, not working after installing a wireless card

  - by Shelley

  A tech friend installed VMware on my Mac so I could use my Windows programs as well. It worked great until I inserted my Sierra 881 USB wireless card while in VMware trying to get to the internet while on the road. It worked briefly, then the AT&T Communication manager won't respond when you click on the icon, I can't open Network and Sharing center, I can't sync my palm - shows it can't connect. Looks like it messed up several things, along with not being able to connect to the internet while in windows. This wireless cards works directly from the Mac - but I need internet while in Windows for some work I am doing. How do I uninstall this - when I try - it just gives me an endless reloading circle - not doing anything. I really need to sync my palm and get back to the way it was. I don't know much about VMware at all and I don't have access to my friend right now to get help.

  Read the article

• What is causing my wireless problems?

  - by user34629

  I have a Dell XPS M1330, since I moved to my new house, the wireless barely works on it, my housemates report no problems, so I guess it's something to do with my laptop. It's eratic in normal mode, sometimes not working for days, usually working on-and-off, forcing me to reload pages a few times before they work, etc. It works perfectly in safe mode, the driver I'm using is the Intel PRO/Wireless 3945ABG Network Connection, version 12.4.4.5, with a date at 26/10/2009, the most recent one I could find, bluetooth is not enabled, and I'm running Vista 32-bit Home Premium, which it shipped with. I also tried disabling IPv6 and resetting the IP stack, both to no avail. Can anybody help me?

  Read the article

• Remote Desktop connection breaks the wireless connection

  - by Michal Talaga

  When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

  Read the article

• Windows 7 computer apparently connected to working wireless network but can't access router page or internet

  - by Hemmer

  I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

  Read the article

• How to Make Your Verizon FIOS Router 1000% More Secure

  - by The Geek

  If you’ve just switched to Verizon FIOS and they’ve installed the new router in your house, there’s just one problem: it’s set to use lousy WEP encryption by default, instead of the much more secure WPA2. Here’s how to fix it. The problem with WEP encryption is that it can be cracked really easily—a skilled hacker can do it in a few minutes, and even an unskilled geek can do it in just a little more time with the right tools. Once they’ve done that, they can leech off your internet connection and do anything they want—including illegal stuff coming from your network. Note: if you are using an old Nintendo DS connected to the internet, they usually only support WEP encryption, so you may not want to do this Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser Free Shipping Day is Friday, December 17, 2010 – National Free Shipping Day Find an Applicable Quote for Any Programming Situation

  Read the article

• How to Setup Your Verizon FIOS Router with OpenDNS or Google DNS

  - by The Geek

  Are you still using your service provider’s DNS servers? You might have heard about Comcast’s DNS servers dying and taking down the internet for anybody not using the more reliable OpenDNS or Google DNS. Here’s how to set it up on your Verizon FIOS router for every device on your network. There’s lots of other reasons to use OpenDNS or Google DNS other than just their rock-solid reliability—they are often much faster than your ISP’s DNS server, and in the case of OpenDNS, there’s loads of extra features like content filtering, typo correction, anti-phishing, and child protection controls. If you’re using Windows, be sure and check out some of our other articles on the subject: Speed Up Your Web Browsing with Google Public DNS Easily Add OpenDNS To Your Router Protect Your Kids Online Using Open DNS Otherwise, keep reading for how to set it up on your router. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Deathwing the Destroyer – WoW Cataclysm Dragon Wallpaper Drag2Up Lets You Drag and Drop Files to the Web With Ease The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser

  Read the article

• What is Error 324? Is it related to Google Chrome? Or Verizon Webmail?

  - by Jason Rhodes

  My in-laws are having trouble with signing into their Verizon Webmail account at webmail.verizon.net, only when they are on their wireless network. When they try to log in from wireless they get "Error 324" in the browser, in both Google Chrome AND IE8. But they can access any other site, and they can get on their Verizon email when they plug in directly to the browser. Does anyone know why this is?

  Read the article

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

• What is error 324? Is it related to Google Chrome? Or Verizon Webmail?

  - by Jason Rhodes

  My in-laws are having trouble with signing into their Verizon Webmail account at webmail.verizon.net, only when they are on their wireless network. When they try to log in from wireless they get "Error 324" in the browser, in both Google Chrome and Internet Explorer 8. But they can access any other site, and they can get on their Verizon email when they plug in directly to the browser. Why is this?

  Read the article

• Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

  - by gil b.

  Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

  Read the article

• Why do I have inconsistent network issues with my laptop's wireless?

  - by Jason

  I'm having trouble with my laptop Internet connection. It's patchy at best and resets or freezes a lot. The signal strength is also random. I thought it might be a driver issue but now I don't know. Three other computers using the same wireless network run well. I've switched out wireless routers so I don't think it's the router. I thought it might be the laptop's internal wireless card but I just bought an external USB network card and I'm still having problems. Specs Lenovo T-60p Windows 7 Ultimate Edition Patches/drivers are up to date I only use one of the below at a time, disabling the other: Intel PRO/Wireless 3945ABG v. 13.3.0.137 (Internal wireless) Medialink Wireless-N USB 2.0 Adapter (USB wireless) Any ideas on what might be the problem?

  Read the article

• How do I get a Broadcom Wireless BCM43225 card working?

  - by DanFritz

  During the installation of my Ubuntu 12.10 I could use the wireless connection for extra updates. After the installation I updated Ubuntu and it installed 74 new updates, after that no wireless connection (say what!). So I did try some stuff, I followed the tutorial to load the windows drivers using ndiswrapper (https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper) but I always get that the ndiswrapper module is not loaded (but I did install the extra 3 packages, still doesnt work). ndiswrapper-source ndiswrapper-dkms ndiswrapper-common Please somebody help! Thanks a lot

  Read the article

• How do I get a TP-LINK WN723N wireless USB adapter working?

  - by Bottie

  I am having trouble using a TP-LINK WN723N wireless USB adapter on my computer which is running Ubuntu 12.04. When I plug the adapter in, the computer automatically picks up a signal from my wireless router but only connects to the internet for a short amount of time before losing the connection. I have searched for additional drivers and have tried running the .exe installation file on the WINE drive with no such luck... Am very new to Ubuntu would love some help! Thanks :-)

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >