Search Results

Search found 2441 results on 98 pages for 'vmware thinapp'.

Page 28/98 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• What does ESXI server do

  - by Mirage

  I installed ESXI server on my machine hoping that it will be similar to workstation where i can install virtual machines. But when i installed it , it shows one screen with no options for making virtual machines. If can't make virtual machines from ESXI , then what is it used for. I formatted my Harddisk just for ESXi but then again had to install windows and then VM workstation.

  Read the article

• (simple) linux HA with vmware vsphere?

  - by derhelge

  I hope my upcoming question is specific enough, and you are able and willing to support :-) We have several openSUSE VMs in an ESX-Cluster (three ESX-Servers) with an attached iSCSI-SAN. All of those Linux VMs are "single point of failure"-configured, which means in the case of a Web-Server: LAMP, storage, etc. everything on this machine. This was very simple and in case of a failure (in the last years: kernel panics or apache crashes) a simple reboot triggered by a script did it. But the problem is: How to upgrade/maintain the w(eb-)application or the underlying OS without downtime? This wasn't really managable and i did this in the early morning ;) How can i achieve a "simple" High-Availability Cluster now? I thought of: DRBD with heartbeat with 2 VMs. And for the storage a RDM (raw device mapped) LUN and change the read-write-permissions for both VMs. Is this a good idea? Anyone has a better solution?

  Read the article

• What's better a better VM app: VMWare, Parallels or Virtual PC

  - by LantisGaius

  From a Windows developer's perspective, which VM application is the best? Why?

  Read the article

• VMWare guest OS internet access issues

  - by Qua Phan

  My host is running Win 7 ultimate 64bit, ESET NOD32 AV 4.0 (64 bit). My guest OS is Windows XP Professional (Sp3) Using bridge mode, I can ping gateway just fine, even ping public dns server (8.8.8.8 or 208.67.222.222). But cannot resolve any dns request. I tried using nslookup with public dns, my gateway but no good. I can access my host share file normally thou. Any suggestions?

  Read the article

• VMware vCenter Server Standard and Foundation Editions

  - by ToreTrygg

  Wondering whether anyone could advise as to the differences between these two products, from my understanding the difference is the latter allows control of more than 3 hosts. What I really wanted to know was, the (cool) features like chargeback and extended Application monitoring are they included in both versions or am I missing something....

  Read the article

• VMWare fusion cant get IP

  - by Mark Sutton

  Whenever I start my VM (Server 2003) it fails to pick up an IP address. It doesnt matter whether bridged or host and affects more than one image. If I set a static iP in the image on the same subnet as the host I cant ping anything on the network. Any ideas?

  Read the article

• ESXi 5.1 on Poweredge 510 freezes after base-esx update

  - by goober

  Background / Problem Just experienced an issue where an ESXi host was upgraded from 5.0 -- 5.1 perfectly fine. Then, I did a scan and remediated a patch (ESXi510-201210401-BG) Looking into the host on via the kvm switch, this appears to complete successfully. However, on reboot, the server hangs at the "Initializing Power Management" phase. I've read from various spots around the internet that this usually clears itself up again upon a cold boot, but given that our servers are in a different building with different access rules, the less I have to physically go there, the better. :) Question Is there anything I can do to avoid an ESXi host hanging at the "initialize power management" phase of boot after remediating the host to apply patches?

  Read the article

• About can't export the performance problems.

  - by kyrathy

  At first,let me describe my environment My VirtualCenter is install on window 2008 ,and theDataBase that VC used is SQL 2008 I really want to ask is ..... When I use vsphere clinet to connect VC.....I got a problem. the performance chart only can show "realtime "...... whatever I only want to view the chart , or I want to export the performance log . when i manually want to export performance, and I select the time to 1 hour ,1 day ,1 month, or from a to b. it showed "No performance data to report for selected objects" only select realtime can export data normally. Before I install Vsphere 4 , I install the SQL 2008 , used the schema in the install CD(I follow the step to create SQL DB for vSphere) Could anybody help me how to solve this problem? And if need any information ,just tell me to provide. Thanks a lot.

  Read the article

• How many virtual processors or cores should I assign to my Guest OS?

  - by reidLinden

  I've just received an upgraded Host machine, and am looking to push some of those advances to my workstations Guest OS(s). In particular, I used to have a single processor, with 2 cores, so my Guest OS only had 1/1. Now, I've got a single processor with 8 cores, so I'm curious about what would be recommended for my Guest OS now? 1 processor/4 cores? 2 processors/2 cores? 4 processors/1 core? My instinct says to stick with the number of physical processors (or less), but, is that based on reality? I spent a good while looking for an answer to this, but perhaps my google-karma isn't in my favor today.

  Read the article

• VMware view for Remote Non Admin Users

  - by jcw248

  Has anyone came up with a way that I can connect to a view enviroment and not have to copy files or install software yet? I have heard of virtualizing the client. I would like to see it work similar to connecting to a view enviroment using a Linux machine. Where the desktop is launched through the browser.

  Read the article

• ESXi boot time with 9 iSCSI targets

  - by Myles Gray

  Our ESXi hosts have always been slow booting when it came to iscsi_vmk loaded successfully - sitting here for almost 5 minutes. In all a full server reboot takes almost 12 minutes. We have 9 iSCSI targets per host (5 SANs with redundant interfaces) configured as dynamic discovery targets. Has anyone experienced this? Can it be remedied with static discovery mode? Are there any debug steps we can work through to help diagnose this? (All our targets are accessible at boot so i'm assuming the host isn't stuck retrying to connect to a target)

  Read the article

• NFS Datastore Appears Empty!

  - by daemonchild

  Hi guys, I've got an NFS server problem. The datastore connected and seems to be a valid datastore in both the vSphere client and under /vmfs/volumes. The issue is that it appears to be empty! I can create files (eg: touch /vmfs/volumes/nfs_common/thefile) and it is correctly written to the nfs store. I can verify this by looking on the nfs server itself. But the vmkernel only sees an empty datastore; the file disappears. Another freebsd box can mount the same NFS share and see the files correctly. Some useful data: ESXi 4.0.0 Build 208167 NFS is unfsd running on a Buffalo Linkstation Pro Duo (a bit hacky I know). The share has file system permissions set to 777 at the moment. My /etc/exports is as follows, and as I say it connects fine. /mnt/array1/ESX_Shared 192.168.16.0/255.255.255.0(insecure,rw,sync,no_root_squash,no_subtree_check) The ESXi servers can also successfully mount NFS shares from other NFS servers. Any ideas guys? Thanks, Tom

  Read the article

• Are there any inexpensive network adapters that will work with ESXi?

  - by Corey

  I have an ASUS motherboard (P5M2-E/4L) with on-board quad-ethernet (Marvell 88E8056), but ESXi does not see them. I need 4 ports for my setup. Would like to stay under $200.00.

  Read the article

• faking NAT with a VMware distributed switch across multiple hosts

  - by romant

  Have a VM that will act as the router, and will be connected to both networks (NAT + 'real'). I spread the distributed switch across the hosts, although any VM that is not on the same physical host as the router/dhcpd simply doesn't get an IP. So its obviously my dvSwitch config. Has anyone achieved a NAT solution using a dvSwitch before that they could share?! Thanks.

  Read the article

• vmware problems

  - by AO

  I renamed some of my virtual machine files and never did a backup before doing so. Now I can't get the machine to start again as it asks for the old files. I have updated references to these files in the project setting files which are in plain text. The virtual machine keeps on asking for the files anyway. I never shut off the machine properly before starting to rename the files. How can I save my work done on the virtual machine disk? I have tried to create a new machine and adding the disk from the old virtual machine only but there seems to be dependencies between disk files. The parent drive cannot be found I am told when trying to add the drive of interest. Any suggestion on how to resolve the issue?

  Read the article

• faking NAT with a VMware distributed switch across multiple hosts

  - by romant

  I need to construct a NAT for certain machines within the network. Wish to do this with dvSwitch - as it seems the logical way of attacking the problem as in this scenario there's just under 30 hosts. In order for the NAT'ed VM's to have access to the 'real' network. I am providing a 'router' VM, which will have access to the WAN/outside network, and also act as the DHCP server for the NAT'ed machines. Problem Space When the machines connected to the NAT interface and the router are on the same host, then they get an IP from the router VM, and work perfectly (routed outside). Unfortunately machines on other Hosts that are connected to the dvSwitch do not get an IP and further tcpdump shows no network data getting through across the hosts within the dvSwitch. Has anyone achieved a NAT solution using a dvSwitch before that they could share?! Thank you. EDIT: Including the diagram.

  Read the article

• Best way to provide redundant switching/links to server

  - by Myles Gray

  We have 3x ESX hosts and 2x SANS that we wish to move to a redundant 10G networking infrastructure. We have 4x Dell PowerConnect 8024F's to provide our backbone and are configured as so (only core switches relevant to this question): So the questions are: 1) Do the interconnects between the 4x 8024F's need to be LAG'd or just STP'd 2) As the NICs on the servers are split across 2 switches, does any special configuration need to be done here or on the switches? 3) If a link or switch fails will the switches automatically find a new path to the Server/SAN?

  Read the article

• FreeNas running on ESXi - sometimes gets very slugish.

  - by Luma

  Hello everyone, I have a ESXi server (dual quad core, 8GB of DDR3 ram, 6x 1TB WD Blacks running in RAid 5 on the PErc 6/i controller. I have a 64bit freenas VM running, on this VM I keep about 200Gigs of stuff that my windows machines access. every now and then the throughput of this VM just dies, for example right now it can't even handle streaming a song and when I tried to transfer a folder the speed goes from 10-400KB/s. Might I add at this point that the ESXi box has dual gigabit network cards plugged into a good solid gigabit switch and other linux and windows VM's are just fine I have seen speeds over 90MB/s (frequently) The server still has ram left over (plenty actually) and cpu is very low (500-1000mhz) any ideas what could cause this? thanks. Luc

  Read the article

• Win7 VM @ ESXi Server @ VMWorkstation (Win7) - ping works only from VM -> HostOS, not vice versa

  - by DK2000

  right now I'm toying around with VM Ware stuff and not having any pcs then my laptop I decided to run an ESXi Server inside of VWmware Workstation. I was just curios to see if the server would allow to setup and run a VM. And after some tweaking there it was, working like a charm. Okay not that fast but startin' the VM from vSphere and "opening a console" gave my direct access to that VM. Now I wanted to see if I could ping the host from the VM (VM Workstation Network is set to "host only"). And it worked, at least from the VM I could ping the ESXi server and the host. From the host I am able to ping the ESXi Server but I can't ping the VM! I asked myself anyway where the VM got its ip adress from. At the DCHPs IP there is at no machine after all. I even tried to use that DHCP adress for my Host and it didn't work out. You can see my settings from the screenshot here (it's pretty wide so just a link): http://yfrog.com/n4desktopfeop The only thing that got me thinking was when I once changed the ESXi's IP from 192.168.92.137 to 192.168.0.137. I still was able to connect to the ESXi server via its new IP but when I tried to run the VM console from vSphere I got an error after a while that said "couldnt connect to 192.168.92.137:903". So vSphere connects just through a port of the ESXi server to the VM?!? Could I setup a Linux VM to use it as a DHCP that I'd at least have control over the IPs that are given. Which lowest end linux could be used for this purpose?!? Thank you for your time! :)

  Read the article

• VMWare guest OS is not using full hard drive space

  - by syuusuke

  Hey everyone, I'm wondering if you can give me some insight on how to figure this out. I've recently virtualized a w2k3 server that had 10GB C:\ drive size. Once I finished virtualizing it, I expanded the disk to 20GB for C:\ and within guest OS (W2K3) computer management settings, you can see it recognizes as 20GB partition C:. But for some reason, if I opened windows explorer and see the properties of C:\, it will only show total size of 10GB. Does anyone know how to solve this or even had this problem before?

  Read the article

• ESXi configuration

  - by Simone Falcini

  I just bought a dedicated server on online.net I have a public and a private ip. I installed esxi from their panel and I can connect successfully with my vsphere client. The problem is this: I want to create some instances and I want to give them different private ips. I also want to create some NAT rules to forward all users coming to my public ip port 80 to a specific instance. How can I do that? Thanks

  Read the article

• Why do I have to manually 'Restart Management Network' on vSphere 5 host after reboot to get networking available?

  - by growse

  I've got a couple of vSphere 5.0 hosts in a small lab environment here and I've noticed a strange behaviour. When on of the hosts gets rebooted, it is unresponsive to the network until I log into the ESX console, Press F2 to customize and select Restart management network. Once this is done, the networking works perfectly as expected. Each host has two NICs which are trunked together using Etherchannel to a Cisco 3750. The link is also a .1q VLAN trunk and the management network is configured on VLAN121 with the VM traffic configured on VLAN118. Why would the host be completely dead to the world until I physically kick it? Edit Sample switch config for trunk: interface Port-channel2 description Blade 1 EtherChannel Trunk switchport trunk encapsulation dot1q switchport mode trunk end ! ! interface GigabitEthernet4/0/1 description Bladecenter1 CPM 1A switchport trunk encapsulation dot1q switchport mode trunk speed 1000 duplex full channel-group 2 mode on end Vswitch teaming settings: Management port group settings:

  Read the article

• Virtual Machine Library not updating

  - by jeremyyip

  Hi, I have a problem with my library window. I use to have a XP VM, which I deleted and now have a Vista VM. Every time I start Fusion, the XP VM shortcut will still be in the library (File not found), and the Vista VM won't be. I have tried re-installing Fusion but the same XP shortcut keeps coming up. Fusion doesn't seem to be updating the list of VM I currently have for some reason. Any ideas? Lots of thanks Jeremy

  Read the article

• Has anyone achieved true differential sync with rsync in ESXi?

  - by Julius

  Berate me later on the fact that I'm using the service console to do anything in ESXi... I've got a working rsync binary (v3.0.4) that I can use in ESXi 4.1U1. I tend to use rsync over cp when copying VM's or backups from one local datastore to another local datastore. I've used rsync to copy data from one ESXi box to another but that was just for small files. In now trying to do true differential syncs of backups taken via ghettoVCB between my primary ESXi machine and a secondary one. But even when I do this locally (one datastore to another datastore on the same ESXi machine) rsync appears to copy the files in their entirety. I've got two VMDK's totally 80GB in size, and rsync still takes anywhere between 1 and 2 hours but the VMDK's aren't growing that much daily. Below is the rsync command I'm executing. I am copying locally because ultimately these files will get copied onto a datastore created from a LUN on a remote system. Its not an rsync that'll be serviced by an rsync daemon on a remote system. rsync -avPSI VMBACKUP_2011-06-10_02-27-56/* VMBACKUP_2011-06-01_06-37-11/ --stats --itemize-changes --existing --modify-window=2 --no-whole-file sending incremental file list >f..t...... VM-flat.vmdk 42949672960 100% 15.06MB/s 0:45:20 (xfer#1, to-check=5/6) >f..t...... VM.vmdk 556 100% 4.24kB/s 0:00:00 (xfer#2, to-check=4/6) >f..t...... VM.vmx 3327 100% 25.19kB/s 0:00:00 (xfer#3, to-check=3/6) >f..t...... VM_1-flat.vmdk 42949672960 100% 12.19MB/s 0:56:01 (xfer#4, to-check=2/6) >f..t...... VM_1.vmdk 558 100% 2.51kB/s 0:00:00 (xfer#5, to-check=1/6) >f..t...... STATUS.ok 30 100% 0.02kB/s 0:00:01 (xfer#6, to-check=0/6) Number of files: 6 Number of files transferred: 6 Total file size: 85899350391 bytes Total transferred file size: 85899350391 bytes Literal data: 2429682778 bytes Matched data: 83469667613 bytes File list size: 129 File list generation time: 0.001 seconds File list transfer time: 0.000 seconds Total bytes sent: 2432530094 Total bytes received: 5243054 sent 2432530094 bytes received 5243054 bytes 295648.92 bytes/sec total size is 85899350391 speedup is 35.24 Is this because ESXi is itself making so many changes to the VMDK's that as far as rsync is concerned the entire file has to be retransmitted? Has anyone actually achieved actual diff sync with ESXi?

  Read the article

• RHEL raw device (over VMware RDM) performance issues

  - by jifa

  I'm running RHEL 5.3 over vSphere 4.0U1. I configured multiple LUNs on my NetApp (Fibre) storage, and added the RDM on two (Linux) VMs, using the Paravirtual SCSI adapter. One LUN is 100GB in size, successfully mapped to /dev/sdb on both VMs, 5 more are 500MB in size (mapped to /dev/sd{c-g}. I also created one partition per device. I have encountered two issues: First, writing directly to /dev/sdb1 gives me ~50MB/s, while any of the /dev/sd{c-g}1 gives me ~9MB/s. There is no difference in configuration of the LUNs apart from their size. I am wondering what causes this but this is not my main problem, as I would settle for 9 MB/s. I created raw devices using udev pretty straightforwardly: ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N" per device Writing to any of the new raw devices dramatically slows down performance to just over 900KB/s. Can anyone point me in a helpful direction? Thanks in advance, -- jifa

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >