Search Results

Search found 701 results on 29 pages for 'wo shi ni ba ba'.

Page 28/29 | < Previous Page | 24 25 26 27 28 29  | Next Page >

• e2fsck extremely slow, although enough memory exists

  - by kaefert

  I've got this external USB-Disk: kaefert@blechmobil:~$ lsusb -s 2:3 Bus 002 Device 003: ID 0bc2:3320 Seagate RSS LLC As can be seen in this dmesg output, there is some problem that prevents that disk from beeing mounted: kaefert@blechmobil:~$ dmesg ... [ 113.084079] usb 2-1: new high-speed USB device number 3 using ehci_hcd [ 113.217783] usb 2-1: New USB device found, idVendor=0bc2, idProduct=3320 [ 113.217787] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 113.217790] usb 2-1: Product: Expansion Desk [ 113.217792] usb 2-1: Manufacturer: Seagate [ 113.217794] usb 2-1: SerialNumber: NA4J4N6K [ 113.435404] usbcore: registered new interface driver uas [ 113.455315] Initializing USB Mass Storage driver... [ 113.468051] scsi5 : usb-storage 2-1:1.0 [ 113.468180] usbcore: registered new interface driver usb-storage [ 113.468182] USB Mass Storage support registered. [ 114.473105] scsi 5:0:0:0: Direct-Access Seagate Expansion Desk 070B PQ: 0 ANSI: 6 [ 114.474342] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.475089] sd 5:0:0:0: [sdb] Write Protect is off [ 114.475092] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 114.475959] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 114.477093] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.501649] sdb: sdb1 [ 114.502717] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.504354] sd 5:0:0:0: [sdb] Attached SCSI disk [ 116.804408] EXT4-fs (sdb1): ext4_check_descriptors: Checksum for group 3976 failed (47397!=61519) [ 116.804413] EXT4-fs (sdb1): group descriptors corrupted! ... So I went and fired up my favorite partition manager - gparted, and told it to verify and repair the partition sdb1. This made gparted call e2fsck (version 1.42.4 (12-Jun-2012)) e2fsck -f -y -v /dev/sdb1 Although gparted called e2fsck with the "-v" option, sadly it doesn't show me the output of my e2fsck process (bugreport https://bugzilla.gnome.org/show_bug.cgi?id=467925 ) I started this whole thing on Sunday (2012-11-04_2200) evening, so about 48 hours ago, this is what htop says about it now (2012-11-06-1900): PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 3704 root 39 19 1560M 1166M 768 R 98.0 19.5 42h56:43 e2fsck -f -y -v /dev/sdb1 Now I found a few posts on the internet that discuss e2fsck running slow, for example: http://gparted-forum.surf4.info/viewtopic.php?id=13613 where they write that its a good idea to see if the disk is just that slow because maybe its damaged, and I think these outputs tell me that this is not the case in my case: kaefert@blechmobil:~$ sudo hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 3562 MB in 2.00 seconds = 1783.29 MB/sec Timing buffered disk reads: 82 MB in 3.01 seconds = 27.26 MB/sec kaefert@blechmobil:~$ sudo hdparm /dev/sdb /dev/sdb: multcount = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 364801/255/63, sectors = 5860533160, start = 0 However, although I can read quickly from that disk, this disk speed doesn't seem to be used by e2fsck, considering tools like gkrellm or iotop or this: kaefert@blechmobil:~$ iostat -x Linux 3.2.0-2-amd64 (blechmobil) 2012-11-06 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 14,24 47,81 14,63 0,95 0,00 22,37 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0,59 8,29 2,42 5,14 43,17 160,17 53,75 0,30 39,80 8,72 54,42 3,95 2,99 sdb 137,54 5,48 9,23 0,20 587,07 22,73 129,35 0,07 7,70 7,51 16,18 2,17 2,04 Now I researched a little bit on how to find out what e2fsck is doing with all that processor time, and I found the tool strace, which gives me this: kaefert@blechmobil:~$ sudo strace -p3704 lseek(4, 41026998272, SEEK_SET) = 41026998272 write(4, "\212\354K[_\361\3nl\212\245\352\255jR\303\354\312Yv\334p\253r\217\265\3567\325\257\3766"..., 4096) = 4096 lseek(4, 48404766720, SEEK_SET) = 48404766720 read(4, "\7t\260\366\346\337\304\210\33\267j\35\377'\31f\372\252\ffU\317.y\211\360\36\240c\30`\34"..., 4096) = 4096 lseek(4, 41027002368, SEEK_SET) = 41027002368 write(4, "\232]7Ws\321\352\t\1@[+5\263\334\276{\343zZx\352\21\316`1\271[\202\350R`"..., 4096) = 4096 lseek(4, 48404770816, SEEK_SET) = 48404770816 read(4, "\17\362r\230\327\25\346//\210H\v\311\3237\323K\304\306\361a\223\311\324\272?\213\tq \370\24"..., 4096) = 4096 lseek(4, 41027006464, SEEK_SET) = 41027006464 write(4, "\367yy>x\216?=\324Z\305\351\376&\25\244\210\271\22\306}\276\237\370(\214\205G\262\360\257#"..., 4096) = 4096 lseek(4, 48404774912, SEEK_SET) = 48404774912 read(4, "\365\25\0\21|T\0\21}3t_\272\373\222k\r\177\303\1\201\261\221$\261B\232\3142\21U\316"..., 4096) = 4096 ^CProcess 3704 detached around 16 of these lines every second, so 4 read and 4 write operations every second, which I don't consider to be a lot.. And finally, my question: Will this process ever finish? If those numbers from fseek (48404774912) represent bytes, that would be something like 45 gigabytes, with this beeing a 3 terrabyte disk, which would give me 134 days to go, if the speed stays constant, and e2fsck scans the disk like this completly and only once. Do you have some advice for me? I have most of the data on that disk elsewhere, but I've put a lot of hours into sorting and merging it to this disk, so I would prefer to getting this disk up and running again, without formatting it anew. I don't think that the hardware is damaged since the disk is only a few months and since I can't see any I/O errors in the dmesg output. UPDATE: I just looked at the strace output again (2012-11-06_2300), now it looks like this: lseek(4, 1419860611072, SEEK_SET) = 1419860611072 read(4, "3#\f\2447\335\0\22A\355\374\276j\204'\207|\217V|\23\245[\7VP\251\242\276\207\317:"..., 4096) = 4096 lseek(4, 43018145792, SEEK_SET) = 43018145792 write(4, "]\206\231\342Y\204-2I\362\242\344\6R\205\361\324\177\265\317C\334V\324\260\334\275t=\10F."..., 4096) = 4096 lseek(4, 1419860615168, SEEK_SET) = 1419860615168 read(4, "\262\305\314Y\367\37x\326\245\226\226\320N\333$s\34\204\311\222\7\315\236\336\300TK\337\264\236\211n"..., 4096) = 4096 lseek(4, 43018149888, SEEK_SET) = 43018149888 write(4, "\271\224m\311\224\25!I\376\16;\377\0\223H\25Yd\201Y\342\r\203\271\24eG<\202{\373V"..., 4096) = 4096 lseek(4, 1419860619264, SEEK_SET) = 1419860619264 read(4, ";d\360\177\n\346\253\210\222|\250\352T\335M\33\260\320\261\7g\222P\344H?t\240\20\2548\310"..., 4096) = 4096 lseek(4, 43018153984, SEEK_SET) = 43018153984 write(4, "\360\252j\317\310\251G\227\335{\214`\341\267\31Y\202\360\v\374\307oq\3063\217Z\223\313\36D\211"..., 4096) = 4096 So the numbers in the lseek lines before the reads, like 1419860619264 are already a lot bigger, standing for 1.29 terabytes if those numbers are bytes, so it doesn't seem to be a linear progress on a big scale, maybe there are only some areas that need work, that have big gaps in between them. UPDATE2: Okey, big disappointment, the numbers are back to very small again (2012-11-07_0720) lseek(4, 52174548992, SEEK_SET) = 52174548992 read(4, "\374\312\22\\\325\215\213\23\0357U\222\246\370v^f(\312|f\212\362\343\375\373\342\4\204mU6"..., 4096) = 4096 lseek(4, 46603526144, SEEK_SET) = 46603526144 write(4, "\370\261\223\227\23?\4\4\217\264\320_Am\246CQ\313^\203U\253\274\204\277\2564n\227\177\267\343"..., 4096) = 4096 so either e2fsck goes over the data multiple times, or it just hops back and forth multiple times. Or my assumption that those numbers are bytes is wrong. UPDATE3: Since it's mentioned here http://forums.fedoraforum.org/showthread.php?t=282125&page=2 that you can testisk while e2fsck is running, i tried that, though not with a lot of success. When asking testdisk to display the data of my partition, this is what I get: TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org 1 P Linux 0 4 5 45600 40 8 732566272 Can't open filesystem. Filesystem seems damaged. And this is what strace currently gives me (2012-11-07_1030) lseek(4, 212460343296, SEEK_SET) = 212460343296 read(4, "\315Mb\265v\377Gn \24\f\205EHh\2349~\330\273\203\3375\206\10\r3=W\210\372\352"..., 4096) = 4096 lseek(4, 47347830784, SEEK_SET) = 47347830784 write(4, "]\204\223\300I\357\4\26\33+\243\312G\230\250\371*m2U\t_\215\265J \252\342Pm\360D"..., 4096) = 4096 (times are in CET)

  Read the article

• Alternate way to create a clone of a UNIX System

  - by Spirit

  THE STORY: (If you don't like to read much, down below is the question :) ) Where I work we have two HP RP2470 servers same hardware same number of hard drives same everything :). One of them is a production server and runs HP-UX 11.00. The poor ba***rd hasn't been turned off for years and now I have to make a clone of it on the other server - just in case, for redundancy. The problem is simple (or not simple) as I have to make the the other server exactly the same. However the old version of OS (UX 11.00 is a history now) and the old software running on it, have made my task almost impossible. On the production server there is also a cloning/recover utility Ignite-UX. I tried many times to create a recovery tape with it. Then when I load the tape on the backup server, it succeeds with the loading of the tape (no errors no warnings) but on the next restart it fails to load the OS :S and drops into HP`s ISL prompt. --- THE QUESTION: Is there an alternate way to create a clone of the Unix System? The environment is: 1. 2x HP RP2470 Servers (non-Intel), same hardware, same number od HDDs (two each of them) same everything. 2. OS running: HP-UX 11.00 The production server has to be cloned without downtime - sadly :( as I hope that they will reconsider on this one For example (like on Windows platforms), if you try to copy an entire HDD with Windows inside on another HDD, and then put that HDD on another PC it will still work, as long as the hardware is the same. Can I do something like that with a Unix system? Can I somehow COPY the contents of the entire HDD, put those on another HDD, and then just load the HDD into the other server? (If you haven't read the story the servers are exactly the same) Will it work? Can it be done with ordinary commands like cp or dump or something like that? Does any one have a similar experience? --- UPDATE: 26.01.2012 NOTE: The update is related to "The Story". If you haven't read that part then you can skip this update. This is just a short update on the recover logs from the Ignite Tape.. someone with more exp. might notice something.. ... --- READING CONTENTS OF THE IGNITE TAPE --- --- OUTPUT OMITED --- ... ... x ./configure3, 413696 bytes, 808 tape blocks x ./monitor_bpr, 20480 bytes, 40 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (Recovery Archive). * Wed Jan 25 15:27:32 EST 2012: Starting archive load of the source (Recovery Archive). * Positioning the tape (/dev/rmt/0mn). * Archive extraction from tape is beginning. Please wait. * Wed Jan 25 15:39:52 EST 2012: Completed archive load of the source (Recovery Archive). * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_l". * Running in recovery mode (os_arch_post_l). * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for sdisk instance 0 address 0/0/1/1.15.0 insf: Installing special files for sdisk instance 1 address 0/0/2/0.1.0 insf: Installing special files for sdisk instance 2 address 0/0/2/1.15.0 insf: Installing special files for stape instance 0 address 0/0/1/0.3.0 insf: Installing special files for btlan instance 0 address 0/0/0/0 insf: Installing special files for btlan instance 1 address 0/2/0/0 insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver sad * Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link permissions. * Constructing the bootconf file. * Setting primary boot path to "0/0/1/1.15.0". * Executing: "/var/adm/sw/products/PHSS_20146/pfiles/iux_postload". * Executing: "/var/adm/sw/products/PHSS_25982/pfiles/iux_postload". NOTE: tlinstall is searching filesystem - please be patient NOTE: Successfully completed * Loading_software: Complete * Build_Kernel: Begin NOTE: Since the /stand/vmunix kernel is already in place, the kernel will not be re-built. Note that no mod_kernel directives will be processed. * Build_Kernel: Complete * Boot_From_Client_Disk: Begin * Rebooting machine as expected. NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done Console reset done. Boot device reset done. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF OFF ON ON LED State: Running non-OS code. (i.e. Boot or Diagnostics) ... ... ... --- SERVER IS PERFORMING POST SEQUENCE HERE --- --- OUTPUT OMITED --- ... ... ... ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.50 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 650 MHz Active Functional 750 KB 1.5 MB 1 650 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 120 Available Memory : 2097152 KB Good Memory Required : 16140 KB Primary boot path: 0/0/1/1.15 Alternate boot path: 0/0/2/1.15 Console path: 0/0/4/1.643 Keyboard path: 0/0/4/0.0 Processor is starting autoboot process. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.38 OCT 26, 1994 ISL booting hpux ISL>

  Read the article

• Ubuntu 14.04 Failed to load module udlfb

  - by jar276705

  DisplayLink doesn't load and run. The adapter is recognized and /dev/FB1 is created. USB bus info: Bus 001 Device 006: ID 17e9:0198 DisplayLink Xorg.0.log: X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 44708.386] X Protocol Version 11, Revision 0 [ 44708.389] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 44708.392] Current Operating System: Linux rrl 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 [ 44708.392] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6b719a77-29e0-4668-8f16-57d0d3a73a3f ro quiet splash vt.handoff=7 [ 44708.399] Build Date: 16 April 2014 01:40:08PM [ 44708.402] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 44708.405] Current version of pixman: 0.30.2 [ 44708.412] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 44708.412] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 44708.427] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 1 09:38:27 2014 [ 44708.431] (==) Using config file: "/etc/X11/xorg.conf" [ 44708.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 44708.435] (==) ServerLayout "X.org Configured" [ 44708.435] (**) |-->Screen "DisplayLinkScreen" (0) [ 44708.435] (**) | |-->Monitor "DisplayLinkMonitor" [ 44708.435] (**) | |-->Device "DisplayLinkDevice" [ 44708.435] (**) |-->Screen "Screen0" (1) [ 44708.435] (**) | |-->Monitor "Monitor0" [ 44708.435] (**) | |-->Device "Card0" [ 44708.435] (**) |-->Input Device "Mouse0" [ 44708.435] (**) |-->Input Device "Keyboard0" [ 44708.435] (==) Automatically adding devices [ 44708.435] (==) Automatically enabling devices [ 44708.435] (==) Automatically adding GPU devices [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 44708.435] (**) ModulePath set to "/usr/lib/xorg/modules" [ 44708.435] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 44708.435] (WW) Disabling Mouse0 [ 44708.435] (WW) Disabling Keyboard0 [ 44708.435] (II) Loader magic: 0xb77106c0 [ 44708.435] (II) Module ABI versions: [ 44708.435] X.Org ANSI C Emulation: 0.4 [ 44708.435] X.Org Video Driver: 15.0 [ 44708.435] X.Org XInput driver : 20.0 [ 44708.435] X.Org Server Extension : 8.0 [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card0) [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card1) [ 44708.437] (--) PCI:*(0:1:5:0) 1002:9616:105b:0e26 rev 0, Mem @ 0xf0000000/134217728, 0xfeae0000/65536, 0xfe900000/1048576, I/O @ 0x0000b000/256 [ 44708.441] Initializing built-in extension Generic Event Extension [ 44708.444] Initializing built-in extension SHAPE [ 44708.448] Initializing built-in extension MIT-SHM [ 44708.452] Initializing built-in extension XInputExtension [ 44708.456] Initializing built-in extension XTEST [ 44708.460] Initializing built-in extension BIG-REQUESTS [ 44708.464] Initializing built-in extension SYNC [ 44708.468] Initializing built-in extension XKEYBOARD [ 44708.471] Initializing built-in extension XC-MISC [ 44708.475] Initializing built-in extension SECURITY [ 44708.479] Initializing built-in extension XINERAMA [ 44708.483] Initializing built-in extension XFIXES [ 44708.487] Initializing built-in extension RENDER [ 44708.491] Initializing built-in extension RANDR [ 44708.494] Initializing built-in extension COMPOSITE [ 44708.498] Initializing built-in extension DAMAGE [ 44708.502] Initializing built-in extension MIT-SCREEN-SAVER [ 44708.506] Initializing built-in extension DOUBLE-BUFFER [ 44708.510] Initializing built-in extension RECORD [ 44708.513] Initializing built-in extension DPMS [ 44708.517] Initializing built-in extension Present [ 44708.521] Initializing built-in extension DRI3 [ 44708.525] Initializing built-in extension X-Resource [ 44708.528] Initializing built-in extension XVideo [ 44708.532] Initializing built-in extension XVideo-MotionCompensation [ 44708.535] Initializing built-in extension SELinux [ 44708.539] Initializing built-in extension XFree86-VidModeExtension [ 44708.542] Initializing built-in extension XFree86-DGA [ 44708.546] Initializing built-in extension XFree86-DRI [ 44708.549] Initializing built-in extension DRI2 [ 44708.549] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 44708.549] (WW) "xmir" is not to be loaded by default. Skipping. [ 44708.549] (II) LoadModule: "glx" [ 44708.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 44708.550] (II) Module glx: vendor="X.Org Foundation" [ 44708.550] compiled for 1.15.1, module version = 1.0.0 [ 44708.550] ABI class: X.Org Server Extension, version 8.0 [ 44708.550] (==) AIGLX enabled [ 44708.553] Loading extension GLX [ 44708.553] (II) LoadModule: "udlfb" [ 44708.554] (WW) Warning, couldn't open module udlfb [ 44708.554] (II) UnloadModule: "udlfb" [ 44708.554] (II) Unloading udlfb [ 44708.554] (EE) Failed to load module "udlfb" (module does not exist, 0) [ 44708.554] (II) LoadModule: "modesetting" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.554] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 0.8.1 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (==) Matched fglrx as autoconfigured driver 0 [ 44708.554] (==) Matched ati as autoconfigured driver 1 [ 44708.554] (==) Matched fglrx as autoconfigured driver 2 [ 44708.554] (==) Matched ati as autoconfigured driver 3 [ 44708.554] (==) Matched modesetting as autoconfigured driver 4 [ 44708.554] (==) Matched fbdev as autoconfigured driver 5 [ 44708.554] (==) Matched vesa as autoconfigured driver 6 [ 44708.554] (==) Assigned the driver to the xf86ConfigLayout [ 44708.554] (II) LoadModule: "fglrx" [ 44708.554] (WW) Warning, couldn't open module fglrx [ 44708.554] (II) UnloadModule: "fglrx" [ 44708.554] (II) Unloading fglrx [ 44708.554] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 44708.554] (II) LoadModule: "ati" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 44708.554] (II) Module ati: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 7.3.0 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (II) LoadModule: "radeon" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 44708.555] (II) Module radeon: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 7.3.0 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "modesetting" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.555] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.8.1 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) UnloadModule: "modesetting" [ 44708.555] (II) Unloading modesetting [ 44708.555] (II) Failed to load module "modesetting" (already loaded, 0) [ 44708.555] (II) LoadModule: "fbdev" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 44708.555] (II) Module fbdev: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.4.4 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "vesa" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 44708.555] (II) Module vesa: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 2.3.3 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 44708.555] (II) RADEON: Driver for ATI Radeon chipsets: [ 44708.560] (II) FBDEV: driver for framebuffer: fbdev [ 44708.560] (II) VESA: driver for VESA chipsets: vesa [ 44708.560] (--) using VT number 7 [ 44708.578] (II) modesetting(0): using drv /dev/dri/card0 [ 44708.578] (II) modesetting(G0): using drv /dev/dri/card1 [ 44708.578] (WW) Falling back to old probe method for fbdev [ 44708.578] (II) Loading sub module "fbdevhw" [ 44708.578] (II) LoadModule: "fbdevhw" [ 44708.578] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 44708.578] (II) Module fbdevhw: vendor="X.Org Foundation" [ 44708.578] compiled for 1.15.1, module version = 0.0.2 [ 44708.578] ABI class: X.Org Video Driver, version 15.0 [ 44708.578] (WW) Falling back to old probe method for vesa [ 44708.578] (**) modesetting(0): Depth 16, (--) framebuffer bpp 16 [ 44708.578] (==) modesetting(0): RGB weight 565 [ 44708.578] (==) modesetting(0): Default visual is TrueColor [ 44708.578] (II) modesetting(0): ShadowFB: preferred YES, enabled YES [ 44708.608] (II) modesetting(0): Output VGA-0 using monitor section DisplayLinkMonitor [ 44708.610] (II) modesetting(0): Output DVI-0 has no monitor section [ 44708.640] (II) modesetting(0): EDID for output VGA-0 [ 44708.640] (II) modesetting(0): Manufacturer: ACR Model: 74 Serial#: 2483090993 [ 44708.640] (II) modesetting(0): Year: 2009 Week: 40 [ 44708.640] (II) modesetting(0): EDID Version: 1.3 [ 44708.640] (II) modesetting(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.640] (II) modesetting(0): Sync: Separate [ 44708.640] (II) modesetting(0): Max Image Size [cm]: horiz.: 53 vert.: 29 [ 44708.640] (II) modesetting(0): Gamma: 2.20 [ 44708.640] (II) modesetting(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.641] (II) modesetting(0): First detailed timing is preferred mode [ 44708.641] (II) modesetting(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 [ 44708.641] (II) modesetting(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 44708.641] (II) modesetting(0): Supported established timings: [ 44708.641] (II) modesetting(0): 720x400@70Hz [ 44708.641] (II) modesetting(0): 640x480@60Hz [ 44708.641] (II) modesetting(0): 640x480@72Hz [ 44708.641] (II) modesetting(0): 640x480@75Hz [ 44708.641] (II) modesetting(0): 800x600@56Hz [ 44708.641] (II) modesetting(0): 800x600@60Hz [ 44708.641] (II) modesetting(0): 800x600@72Hz [ 44708.641] (II) modesetting(0): 800x600@75Hz [ 44708.641] (II) modesetting(0): 1024x768@60Hz [ 44708.641] (II) modesetting(0): 1024x768@70Hz [ 44708.641] (II) modesetting(0): 1024x768@75Hz [ 44708.641] (II) modesetting(0): 1280x1024@75Hz [ 44708.641] (II) modesetting(0): Manufacturer's mask: 0 [ 44708.641] (II) modesetting(0): Supported standard timings: [ 44708.641] (II) modesetting(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.641] (II) modesetting(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.641] (II) modesetting(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 44708.641] (II) modesetting(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 44708.641] (II) modesetting(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 44708.641] (II) modesetting(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 44708.641] (II) modesetting(0): Supported detailed timing: [ 44708.641] (II) modesetting(0): clock: 138.5 MHz Image Size: 531 x 298 mm [ 44708.641] (II) modesetting(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 44708.641] (II) modesetting(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 44708.641] (II) modesetting(0): Monitor name: H243H [ 44708.641] (II) modesetting(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz [ 44708.641] (II) modesetting(0): Serial No: LEW0C0044002 [ 44708.641] (II) modesetting(0): EDID (in hex): [ 44708.641] (II) modesetting(0): 00ffffffffffff000472740031f60094 [ 44708.641] (II) modesetting(0): 2813010368351d78ea6085a6564a9c25 [ 44708.641] (II) modesetting(0): 125054afcf008180714f9500950fa940 [ 44708.641] (II) modesetting(0): b300010101011a3680a070381f403020 [ 44708.641] (II) modesetting(0): 3500132a2100001a000000fc00483234 [ 44708.642] (II) modesetting(0): 33480a20202020202020000000fd0038 [ 44708.642] (II) modesetting(0): 4c1f5312000a202020202020000000ff [ 44708.642] (II) modesetting(0): 004c45573043303034343030320a003c [ 44708.642] (II) modesetting(0): Printing probed modes for output VGA-0 [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz UeP) [ 44708.642] (II) modesetting(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 44708.642] (II) modesetting(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.645] (II) modesetting(0): EDID for output DVI-0 [ 44708.645] (II) modesetting(0): Output VGA-0 connected [ 44708.645] (II) modesetting(0): Output DVI-0 disconnected [ 44708.645] (II) modesetting(0): Using user preference for initial modes [ 44708.645] (II) modesetting(0): Output VGA-0 using initial mode 1280x1024 [ 44708.645] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.645] (==) modesetting(0): DPI set to (96, 96) [ 44708.645] (II) Loading sub module "fb" [ 44708.645] (II) LoadModule: "fb" [ 44708.645] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.645] (II) Module fb: vendor="X.Org Foundation" [ 44708.645] compiled for 1.15.1, module version = 1.0.0 [ 44708.645] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.645] (II) Loading sub module "shadow" [ 44708.645] (II) LoadModule: "shadow" [ 44708.646] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 44708.646] (II) Module shadow: vendor="X.Org Foundation" [ 44708.646] compiled for 1.15.1, module version = 1.1.0 [ 44708.646] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.646] (**) modesetting(G0): Depth 16, (--) framebuffer bpp 16 [ 44708.646] (==) modesetting(G0): RGB weight 565 [ 44708.646] (==) modesetting(G0): Default visual is TrueColor [ 44708.646] (II) modesetting(G0): ShadowFB: preferred NO, enabled NO [ 44708.727] (II) modesetting(G0): Output DVI-1-0 using monitor section DisplayLinkMonitor [ 44708.808] (II) modesetting(G0): EDID for output DVI-1-0 [ 44708.808] (II) modesetting(G0): Manufacturer: WDE Model: 1702 Serial#: 0 [ 44708.808] (II) modesetting(G0): Year: 2005 Week: 14 [ 44708.808] (II) modesetting(G0): EDID Version: 1.3 [ 44708.808] (II) modesetting(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.808] (II) modesetting(G0): Sync: Separate [ 44708.808] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 44708.808] (II) modesetting(G0): Gamma: 2.20 [ 44708.808] (II) modesetting(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.808] (II) modesetting(G0): Default color space is primary color space [ 44708.808] (II) modesetting(G0): First detailed timing is preferred mode [ 44708.808] (II) modesetting(G0): GTF timings supported [ 44708.808] (II) modesetting(G0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608 [ 44708.808] (II) modesetting(G0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329 [ 44708.808] (II) modesetting(G0): Supported established timings: [ 44708.808] (II) modesetting(G0): 720x400@70Hz [ 44708.808] (II) modesetting(G0): 640x480@60Hz [ 44708.808] (II) modesetting(G0): 640x480@67Hz [ 44708.808] (II) modesetting(G0): 640x480@72Hz [ 44708.808] (II) modesetting(G0): 640x480@75Hz [ 44708.808] (II) modesetting(G0): 800x600@56Hz [ 44708.808] (II) modesetting(G0): 800x600@60Hz [ 44708.808] (II) modesetting(G0): 800x600@72Hz [ 44708.808] (II) modesetting(G0): 800x600@75Hz [ 44708.808] (II) modesetting(G0): 832x624@75Hz [ 44708.808] (II) modesetting(G0): 1024x768@60Hz [ 44708.808] (II) modesetting(G0): 1024x768@70Hz [ 44708.808] (II) modesetting(G0): 1024x768@75Hz [ 44708.809] (II) modesetting(G0): 1280x1024@75Hz [ 44708.809] (II) modesetting(G0): Manufacturer's mask: 0 [ 44708.809] (II) modesetting(G0): Supported standard timings: [ 44708.809] (II) modesetting(G0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.809] (II) modesetting(G0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.809] (II) modesetting(G0): Supported detailed timing: [ 44708.809] (II) modesetting(G0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 44708.809] (II) modesetting(G0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 44708.809] (II) modesetting(G0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 44708.809] (II) modesetting(G0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz [ 44708.809] (II) modesetting(G0): Monitor name: WDE LCM-17v2 [ 44708.809] (II) modesetting(G0): Serial No: 0 [ 44708.809] (II) modesetting(G0): EDID (in hex): [ 44708.809] (II) modesetting(G0): 00ffffffffffff005c85021700000000 [ 44708.809] (II) modesetting(G0): 0e0f010368221b78ef8bc5a45a489b25 [ 44708.809] (II) modesetting(G0): 1a5054bfef008180714f010101010101 [ 44708.809] (II) modesetting(G0): 010101010101302a009851002a403070 [ 44708.809] (II) modesetting(G0): 1300520e1100001e000000fd00324b1e [ 44708.809] (II) modesetting(G0): 520e000a202020202020000000fc0057 [ 44708.809] (II) modesetting(G0): 4445204c434d2d313776320a000000ff [ 44708.809] (II) modesetting(G0): 00300a202020202020202020202000e7 [ 44708.809] (II) modesetting(G0): Printing probed modes for output DVI-1-0 [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP) [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz) [ 44708.810] (II) modesetting(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.810] (==) modesetting(G0): DPI set to (96, 96) [ 44708.810] (II) Loading sub module "fb" [ 44708.810] (II) LoadModule: "fb" [ 44708.810] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.810] (II) Module fb: vendor="X.Org Foundation" [ 44708.810] compiled for 1.15.1, module version = 1.0.0 [ 44708.811] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.811] (II) UnloadModule: "radeon" [ 44708.811] (II) Unloading radeon [ 44708.811] (II) UnloadModule: "fbdev" [ 44708.811] (II) Unloading fbdev [ 44708.811] (II) UnloadSubModule: "fbdevhw" [ 44708.811] (II) Unloading fbdevhw [ 44708.811] (II) UnloadModule: "vesa" [ 44708.811] (II) Unloading vesa [ 44708.811] (==) modesetting(G0): Backing store enabled [ 44708.811] (==) modesetting(G0): Silken mouse enabled [ 44708.812] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(G0): DPMS enabled [ 44708.812] (WW) modesetting(G0): Option "fbdev" is not used [ 44708.812] (==) modesetting(0): Backing store enabled [ 44708.812] (==) modesetting(0): Silken mouse enabled [ 44708.812] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(0): DPMS enabled [ 44708.812] (WW) modesetting(0): Option "fbdev" is not used [ 44708.856] (--) RandR disabled [ 44708.867] (II) SELinux: Disabled on system [ 44708.868] (II) AIGLX: Screen 0 is not DRI2 capable [ 44708.868] (EE) AIGLX: reverting to software rendering [ 44708.878] (II) AIGLX: Loaded and initialized swrast [ 44708.878] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 44708.879] (II) modesetting(G0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Setting screen physical size to 338 x 270 [ 44708.900] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 44708.918] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 44708.918] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.918] (II) LoadModule: "evdev" [ 44708.918] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 44708.918] (II) Module evdev: vendor="X.Org Foundation" [ 44708.918] compiled for 1.15.0, module version = 2.8.2 [ 44708.918] Module class: X.Org XInput Driver [ 44708.918] ABI class: X.Org XInput driver, version 20.0 [ 44708.918] (II) Using input driver 'evdev' for 'Power Button' [ 44708.918] (**) Power Button: always reports core events [ 44708.918] (**) evdev: Power Button: Device: "/dev/input/event1" [ 44708.918] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.918] (--) evdev: Power Button: Found keys [ 44708.918] (II) evdev: Power Button: Configuring as keyboard [ 44708.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 44708.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 44708.918] (**) Option "xkb_rules" "evdev" [ 44708.918] (**) Option "xkb_model" "pc105" [ 44708.918] (**) Option "xkb_layout" "us" [ 44708.919] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 44708.919] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.919] (II) Using input driver 'evdev' for 'Power Button' [ 44708.919] (**) Power Button: always reports core events [ 44708.919] (**) evdev: Power Button: Device: "/dev/input/event0" [ 44708.919] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.919] (--) evdev: Power Button: Found keys [ 44708.919] (II) evdev: Power Button: Configuring as keyboard [ 44708.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" Is there anything I can do to fix this problem.

  Read the article

• Can't install graphic drivers in 12.04

  - by yinon

  The driver is ATI/AMD proprietary FGLRX graphics driver. After clicking Activate, it asks for my password and starts downloading. Then it shows an error message: 2012-10-03 16:16:04,227 DEBUG: updating <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> 2012-10-03 16:16:06,172 DEBUG: reading modalias file /lib/modules/3.2.0-29-generic-pae/modules.alias 2012-10-03 16:16:06,383 DEBUG: reading modalias file /usr/share/jockey/modaliases/b43 2012-10-03 16:16:06,386 DEBUG: reading modalias file /usr/share/jockey/modaliases/disable-upstream-nvidia 2012-10-03 16:16:06,456 DEBUG: loading custom handler /usr/share/jockey/handlers/pvr-omap4.py 2012-10-03 16:16:06,506 WARNING: modinfo for module omapdrm_pvr failed: ERROR: modinfo: could not find module omapdrm_pvr 2012-10-03 16:16:06,509 DEBUG: Instantiated Handler subclass __builtin__.PVROmap4Driver from name PVROmap4Driver 2012-10-03 16:16:06,682 DEBUG: PowerVR SGX proprietary graphics driver for OMAP 4 not available 2012-10-03 16:16:06,682 DEBUG: loading custom handler /usr/share/jockey/handlers/cdv.py 2012-10-03 16:16:06,727 WARNING: modinfo for module cedarview_gfx failed: ERROR: modinfo: could not find module cedarview_gfx 2012-10-03 16:16:06,728 DEBUG: Instantiated Handler subclass __builtin__.CdvDriver from name CdvDriver 2012-10-03 16:16:06,728 DEBUG: cdv.available: falling back to default 2012-10-03 16:16:06,772 DEBUG: Intel Cedarview graphics driver availability undetermined, adding to pool 2012-10-03 16:16:06,772 DEBUG: loading custom handler /usr/share/jockey/handlers/vmware-client.py 2012-10-03 16:16:06,781 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2012-10-03 16:16:06,781 DEBUG: Instantiated Handler subclass __builtin__.VmwareClientHandler from name VmwareClientHandler 2012-10-03 16:16:06,795 DEBUG: VMWare Client Tools availability undetermined, adding to pool 2012-10-03 16:16:06,796 DEBUG: loading custom handler /usr/share/jockey/handlers/fglrx.py 2012-10-03 16:16:06,801 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-10-03 16:16:06,805 DEBUG: Instantiated Handler subclass __builtin__.FglrxDriverUpdate from name FglrxDriverUpdate 2012-10-03 16:16:06,805 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:06,833 DEBUG: ATI/AMD proprietary FGLRX graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:06,836 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-10-03 16:16:06,840 DEBUG: Instantiated Handler subclass __builtin__.FglrxDriver from name FglrxDriver 2012-10-03 16:16:06,840 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:06,873 DEBUG: ATI/AMD proprietary FGLRX graphics driver availability undetermined, adding to pool 2012-10-03 16:16:06,873 DEBUG: loading custom handler /usr/share/jockey/handlers/dvb_usb_firmware.py 2012-10-03 16:16:06,925 DEBUG: Instantiated Handler subclass __builtin__.DvbUsbFirmwareHandler from name DvbUsbFirmwareHandler 2012-10-03 16:16:06,926 DEBUG: Firmware for DVB cards not available 2012-10-03 16:16:06,926 DEBUG: loading custom handler /usr/share/jockey/handlers/nvidia.py 2012-10-03 16:16:06,961 WARNING: modinfo for module nvidia_96 failed: ERROR: modinfo: could not find module nvidia_96 2012-10-03 16:16:06,967 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver96 from name NvidiaDriver96 2012-10-03 16:16:06,968 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:06,980 DEBUG: XorgDriverHandler(nvidia_96, nvidia-96, None): Disabling as package video ABI xorg-video-abi-10 does not match X.org video ABI xorg-video-abi-11 2012-10-03 16:16:06,980 DEBUG: NVIDIA accelerated graphics driver not available 2012-10-03 16:16:06,983 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-10-03 16:16:06,987 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverCurrent from name NvidiaDriverCurrent 2012-10-03 16:16:06,987 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,015 DEBUG: NVIDIA accelerated graphics driver availability undetermined, adding to pool 2012-10-03 16:16:07,018 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-10-03 16:16:07,021 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriverCurrentUpdates from name NvidiaDriverCurrentUpdates 2012-10-03 16:16:07,022 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,066 DEBUG: NVIDIA accelerated graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:07,069 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-10-03 16:16:07,072 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver173Updates from name NvidiaDriver173Updates 2012-10-03 16:16:07,073 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,105 DEBUG: NVIDIA accelerated graphics driver (post-release updates) availability undetermined, adding to pool 2012-10-03 16:16:07,112 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-10-03 16:16:07,118 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver173 from name NvidiaDriver173 2012-10-03 16:16:07,119 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,159 DEBUG: NVIDIA accelerated graphics driver availability undetermined, adding to pool 2012-10-03 16:16:07,166 WARNING: modinfo for module nvidia_96_updates failed: ERROR: modinfo: could not find module nvidia_96_updates 2012-10-03 16:16:07,171 DEBUG: Instantiated Handler subclass __builtin__.NvidiaDriver96Updates from name NvidiaDriver96Updates 2012-10-03 16:16:07,171 DEBUG: nvidia.available: falling back to default 2012-10-03 16:16:07,188 DEBUG: XorgDriverHandler(nvidia_96_updates, nvidia-96-updates, None): Disabling as package video ABI xorg-video-abi-10 does not match X.org video ABI xorg-video-abi-11 2012-10-03 16:16:07,188 DEBUG: NVIDIA accelerated graphics driver (post-release updates) not available 2012-10-03 16:16:07,188 DEBUG: loading custom handler /usr/share/jockey/handlers/madwifi.py 2012-10-03 16:16:07,195 WARNING: modinfo for module ath_pci failed: ERROR: modinfo: could not find module ath_pci 2012-10-03 16:16:07,195 DEBUG: Instantiated Handler subclass __builtin__.MadwifiHandler from name MadwifiHandler 2012-10-03 16:16:07,196 DEBUG: Alternate Atheros "madwifi" driver availability undetermined, adding to pool 2012-10-03 16:16:07,196 DEBUG: loading custom handler /usr/share/jockey/handlers/sl_modem.py 2012-10-03 16:16:07,213 DEBUG: Instantiated Handler subclass __builtin__.SlModem from name SlModem 2012-10-03 16:16:07,234 DEBUG: Software modem not available 2012-10-03 16:16:07,234 DEBUG: loading custom handler /usr/share/jockey/handlers/broadcom_wl.py 2012-10-03 16:16:07,239 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2012-10-03 16:16:07,277 DEBUG: Instantiated Handler subclass __builtin__.BroadcomWLHandler from name BroadcomWLHandler 2012-10-03 16:16:07,277 DEBUG: Broadcom STA wireless driver availability undetermined, adding to pool 2012-10-03 16:16:07,278 DEBUG: all custom handlers loaded 2012-10-03 16:16:07,278 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027D8sv00001043sd000082EAbc04sc03i00') 2012-10-03 16:16:07,568 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel'} 2012-10-03 16:16:07,699 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,699 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel'} 2012-10-03 16:16:07,699 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_hda_intel', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,699 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0000v0000p0000e0000-e0,5,kramlsfw6,') 2012-10-03 16:16:07,704 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,704 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,704 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027DAsv00001043sd00008179bc0Csc05i00') 2012-10-03 16:16:07,707 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'i2c_i801'} 2012-10-03 16:16:07,707 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'i2c_i801', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0C01:') 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0B00:') 2012-10-03 16:16:07,707 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00001969d00001026sv00001043sd00008304bc02sc00i00') 2012-10-03 16:16:07,710 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'atl1e'} 2012-10-03 16:16:07,710 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'atl1e', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,710 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0003v04F2p0816e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw') 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,711 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:pcspkr') 2012-10-03 16:16:07,711 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'pcspkr'} 2012-10-03 16:16:07,711 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'pcspkr', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,712 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_pcsp'} 2012-10-03 16:16:07,712 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_pcsp', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,712 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'usb:v1D6Bp0001d0302dc09dsc00dp00ic09isc00ip00') 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'input:b0019v0000p0001e0000-e0,1,k74,ramlsfw') 2012-10-03 16:16:07,724 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'evbug'} 2012-10-03 16:16:07,724 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'evbug', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,724 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid'} 2012-10-03 16:16:07,724 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'mac_hid', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0C04:') 2012-10-03 16:16:07,724 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:eisa') 2012-10-03 16:16:07,725 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000027CCsv00001043sd00008179bc0Csc03i20') 2012-10-03 16:16:07,728 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'platform:Fixed MDIO bus') 2012-10-03 16:16:07,728 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00008086d000029C0sv00001043sd000082B0bc06sc00i00') 2012-10-03 16:16:07,731 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'usb:v045Ep0766d0101dcEFdsc02dp01ic01isc01ip00') 2012-10-03 16:16:07,777 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'snd_usb_audio'} 2012-10-03 16:16:07,777 DEBUG: no corresponding handler available for {'driver_type': 'kernel_module', 'kernel_module': 'snd_usb_audio', 'jockey_handler': 'KernelModuleHandler'} 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0F03:PNP0F13:') 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'acpi:PNP0000:') 2012-10-03 16:16:07,777 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xb7231a0c> about HardwareID('modalias', 'pci:v00001002d000095C5sv0000174Bsd0000E400bc03sc00i00') 2012-10-03 16:16:08,072 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'fglrx_updates', 'package': 'fglrx-updates'} 2012-10-03 16:16:08,133 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,134 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:16:08,072 DEBUG: found match in handler pool xorg:fglrx_updates([FglrxDriverUpdate, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver (post-release updates)) 2012-10-03 16:16:08,136 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-10-03 16:16:08,147 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:08,173 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,173 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:16:08,162 DEBUG: got handler xorg:fglrx_updates([FglrxDriverUpdate, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver (post-release updates)) 2012-10-03 16:16:08,173 DEBUG: searching handler for driver ID {'driver_type': 'kernel_module', 'kernel_module': 'fglrx', 'package': 'fglrx'} 2012-10-03 16:16:08,184 DEBUG: fglrx.enabled(fglrx): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None 2012-10-03 16:16:08,184 DEBUG: fglrx is not the alternative in use 2012-10-03 16:16:08,173 DEBUG: found match in handler pool xorg:fglrx([FglrxDriver, nonfree, disabled] ATI/AMD proprietary FGLRX graphics driver) 2012-10-03 16:16:08,187 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-10-03 16:16:08,190 DEBUG: fglrx.available: falling back to default 2012-10-03 16:16:08,216 DEBUG: fglrx.enabled(fglrx): target_alt None current_alt /usr/lib/i386-linux-gnu/mesa/ld.so.conf other target alt None other current alt None . . . 2012-10-03 16:18:10,552 DEBUG: install progress initramfs-tools 62.500000 2012-10-03 16:18:22,249 DEBUG: install progress libc-bin 62.500000 2012-10-03 16:18:23,251 DEBUG: Selecting previously unselected package dkms. (Reading database ... 142496 files and directories currently installed.) Unpacking dkms (from .../dkms_2.2.0.3-1ubuntu3_all.deb) ... Selecting previously unselected package fakeroot. Unpacking fakeroot (from .../fakeroot_1.18.2-1_i386.deb) ... Selecting previously unselected package fglrx-updates. Unpacking fglrx-updates (from .../fglrx-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Selecting previously unselected package fglrx-amdcccle-updates. Unpacking fglrx-amdcccle-updates (from .../fglrx-amdcccle-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot dpkg: error processing libxss1 (--configure): package libxss1 is already installed and configured dpkg: error processing chromium-codecs-ffmpeg (--configure): package chromium-codecs-ffmpeg is already installed and configured dpkg: error processing chromium-browser (--configure): package chromium-browser is already installed and configured dpkg: error processing chromium-browser-l10n (--configure): package chromium-browser-l10n is already installed and configured Setting up dkms (2.2.0.3-1ubuntu3) ... No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Setting up fakeroot (1.18.2-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up fglrx-updates (2:8.960-0ubuntu1.1) ... update-alternatives: using /usr/lib/fglrx/ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in auto mode. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: using /usr/lib/fglrx/alt_ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in auto mode. update-initramfs: deferring update (trigger activated) Loading new fglrx-updates-8.960 DKMS files... First Installation: checking all kernels... Building only for 3.2.0-29-generic-pae Building for architecture i686 Building initial module for 3.2.0-29-generic-pae Done. fglrx_updates: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-29-generic-pae/updates/dkms/ depmod...... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle-updates (2:8.960-0ubuntu1.1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-29-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: libxss1 chromium-codecs-ffmpeg chromium-browser chromium-browser-l10n Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) 2012-10-03 16:18:23,256 ERROR: Package failed to install: Selecting previously unselected package dkms. (Reading database ... 142496 files and directories currently installed.) Unpacking dkms (from .../dkms_2.2.0.3-1ubuntu3_all.deb) ... Selecting previously unselected package fakeroot. Unpacking fakeroot (from .../fakeroot_1.18.2-1_i386.deb) ... Selecting previously unselected package fglrx-updates. Unpacking fglrx-updates (from .../fglrx-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Selecting previously unselected package fglrx-amdcccle-updates. Unpacking fglrx-amdcccle-updates (from .../fglrx-amdcccle-updates_2%3a8.960-0ubuntu1.1_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot dpkg: error processing libxss1 (--configure): package libxss1 is already installed and configured dpkg: error processing chromium-codecs-ffmpeg (--configure): package chromium-codecs-ffmpeg is already installed and configured dpkg: error processing chromium-browser (--configure): package chromium-browser is already installed and configured dpkg: error processing chromium-browser-l10n (--configure): package chromium-browser-l10n is already installed and configured Setting up dkms (2.2.0.3-1ubuntu3) ... No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Setting up fakeroot (1.18.2-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up fglrx-updates (2:8.960-0ubuntu1.1) ... update-alternatives: using /usr/lib/fglrx/ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_GL.conf (i386-linux-gnu_gl_conf) in auto mode. update-alternatives: warning: skip creation of /etc/OpenCL/vendors/amdocl64.icd because associated file /usr/lib/fglrx/etc/OpenCL/vendors/amdocl64.icd (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalcl.so because associated file /usr/lib32/fglrx/libaticalcl.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: warning: skip creation of /usr/lib32/libaticalrt.so because associated file /usr/lib32/fglrx/libaticalrt.so (of link group i386-linux-gnu_gl_conf) doesn't exist. update-alternatives: using /usr/lib/fglrx/alt_ld.so.conf to provide /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf (x86_64-linux-gnu_gl_conf) in auto mode. update-initramfs: deferring update (trigger activated) Loading new fglrx-updates-8.960 DKMS files... First Installation: checking all kernels... Building only for 3.2.0-29-generic-pae Building for architecture i686 Building initial module for 3.2.0-29-generic-pae Done. fglrx_updates: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/3.2.0-29-generic-pae/updates/dkms/ depmod...... DKMS: install completed. update-initramfs: deferring update (trigger activated) Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up fglrx-amdcccle-updates (2:8.960-0ubuntu1.1) ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-29-generic-pae Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: libxss1 chromium-codecs-ffmpeg chromium-browser chromium-browser-l10n Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) 2012-10-03 16:18:23,590 WARNING: /sys/module/fglrx_updates/drivers does not exist, cannot rebind fglrx_updates driver 2012-10-03 16:18:43,601 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:43,601 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:43,617 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:43,617 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,143 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,144 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,154 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,154 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,182 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,182 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-03 16:18:54,215 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,215 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,229 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,229 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,268 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,268 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,279 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,279 DEBUG: fglrx_updates is not the alternative in use 2012-10-03 16:18:54,298 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-03 16:18:54,298 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-03 16:18:57,828 DEBUG: Shutting down I don't know how to troubleshoot from looking at the log file, could somebody assist me with this please? You can download the log file at: https://www.dropbox.com/s/a59d2hyabo02q5z/jockey.log

  Read the article

• Ubuntu missing from the Grub menu

  - by varevarao

  Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

  Read the article

• MPM Prefork Apache Uses Absurd Amount of Memory

  - by Charlie JM

  Help! My apache processes are all using 115MB of memory on startup. Relevant information: Linux version (uname -a) Linux 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686 GNU/Linux Apache version (/usr/sbin/apache2 -v) Server version: Apache/2.2.8 (Ubuntu) Server built: Mar 9 2010 20:45:36 Top display (top -u www-data) PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 23377 www-data 20 0 115m 94m 3908 S 28 1.6 0:04.59 apache2 23375 www-data 20 0 119m 99m 5892 S 9 1.6 0:05.04 apache2 23324 www-data 20 0 116m 96m 5144 S 2 1.6 0:04.73 apache2 23283 www-data 20 0 115m 95m 4480 S 1 1.6 0:04.89 apache2 23259 www-data 20 0 116m 96m 5380 S 0 1.6 0:05.55 apache2 23370 www-data 20 0 115m 94m 4396 S 0 1.6 0:04.75 apache2 23229 www-data 20 0 116m 96m 6096 S 0 1.6 0:05.43 apache2 ... and so on ... Memory map (pmap $(pidof apache2)) (actually, just one apache2 process) Most of the memory is [anon], see line 5 23324: /usr/sbin/apache2 -k start 08048000 332K r-x-- /usr/sbin/apache2 0809b000 8K rw--- /usr/sbin/apache2 0809d000 12K rw--- [ anon ] 093a0000 92812K rw--- [ anon ] b5b6c000 4K rw--- [ anon ] b5b6d000 512K rw-s- [ shmid=0x13528003 ] b5fa8000 16K r-x-- /lib/tls/i686/cmov/libnss_dns-2.7.so b5fac000 8K rw--- /lib/tls/i686/cmov/libnss_dns-2.7.so b5fae000 120K r-x-- /usr/lib/php5/20060613+lfs/suhosin.so b5fcc000 16K rw--- /usr/lib/php5/20060613+lfs/suhosin.so b5fd0000 4K rw--- [ anon ] b5fd1000 76K r-x-- /usr/lib/php5/20060613+lfs/pdo.so b5fe4000 8K rw--- /usr/lib/php5/20060613+lfs/pdo.so b5fe6000 92K r-x-- /usr/lib/php5/20060613+lfs/mysqli.so b5ffd000 8K rw--- /usr/lib/php5/20060613+lfs/mysqli.so b5fff000 1648K r-x-- /usr/lib/libmysqlclient.so.15.0.0 b619b000 268K rw--- /usr/lib/libmysqlclient.so.15.0.0 b61de000 4K rw--- [ anon ] b61f0000 92K r-x-- /usr/lib/libxcb.so.1.0.0 b6207000 4K rw--- /usr/lib/libxcb.so.1.0.0 b6208000 164K r-x-- /usr/lib/libfontconfig.so.1.3.0 b6231000 4K rw--- /usr/lib/libfontconfig.so.1.3.0 b6232000 124K r-x-- /usr/lib/libjpeg.so.62.0.0 b6251000 4K rw--- /usr/lib/libjpeg.so.62.0.0 b6252000 136K r-x-- /usr/lib/libpng12.so.0.15.0 b6274000 4K rw--- /usr/lib/libpng12.so.0.15.0 b6275000 60K r-x-- /usr/lib/libXpm.so.4.11.0 b6284000 4K rw--- /usr/lib/libXpm.so.4.11.0 b6285000 912K r-x-- /usr/lib/libX11.so.6.2.0 b6369000 12K rw--- /usr/lib/libX11.so.6.2.0 b636c000 424K r-x-- /usr/lib/libfreetype.so.6.3.16 b63d6000 12K rw--- /usr/lib/libfreetype.so.6.3.16 b63d9000 236K r-x-- /usr/lib/libt1.so.5.1.1 b6414000 12K rw--- /usr/lib/libt1.so.5.1.1 b6417000 84K rw--- [ anon ] b642c000 116K r-x-- /usr/lib/libgd.so.2.0.0 b6449000 128K rw--- /usr/lib/libgd.so.2.0.0 b6469000 16K rw--- [ anon ] b646d000 88K r-x-- /usr/lib/php5/20060613+lfs/gd.so b6483000 16K rw--- /usr/lib/php5/20060613+lfs/gd.so b6487000 192K r-x-- /usr/lib/libidn.so.11.5.30 b64b7000 4K rw--- /usr/lib/libidn.so.11.5.30 b64b8000 232K r-x-- /usr/lib/libcurl.so.4.0.1 b64f2000 4K rw--- /usr/lib/libcurl.so.4.0.1 b64f8000 44K r-x-- /usr/lib/php5/20060613+lfs/mysql.so b6503000 4K rw--- /usr/lib/php5/20060613+lfs/mysql.so b6504000 268K r-x-- /usr/lib/libgmp.so.3.4.2 b6547000 4K rw--- /usr/lib/libgmp.so.3.4.2 b6548000 648K r-x-- /usr/lib/libclamav.so.5.0.4 b65ea000 44K rw--- /usr/lib/libclamav.so.5.0.4 b65f8000 52K r-x-- /usr/lib/php5/20060613+lfs/curl.so b6605000 4K rw--- /usr/lib/php5/20060613+lfs/curl.so b6606000 148K r-x-- /usr/lib/libmcrypt.so.4.4.7 b662b000 8K rw--- /usr/lib/libmcrypt.so.4.4.7 b662d000 28K rw--- [ anon ] b6634000 24K r-x-- /usr/lib/php5/20060613+lfs/pdo_mysql.so b663a000 4K rw--- /usr/lib/php5/20060613+lfs/pdo_mysql.so b663b000 16K r-x-- /usr/lib/libXdmcp.so.6.0.0 b663f000 4K rw--- /usr/lib/libXdmcp.so.6.0.0 b6640000 12K r-x-- /usr/lib/php5/20060613+lfs/clamav.so b6643000 4K rw--- /usr/lib/php5/20060613+lfs/clamav.so b6644000 1036K r-x-- /usr/lib/libc-client.so.2007.0 b6747000 28K rw--- /usr/lib/libc-client.so.2007.0 b674e000 4K rw--- [ anon ] b6750000 24K r-x-- /usr/lib/libltdl.so.3.1.6 b6756000 4K rw--- /usr/lib/libltdl.so.3.1.6 b6757000 32K r-x-- /usr/lib/php5/20060613+lfs/mcrypt.so b675f000 4K rw--- /usr/lib/php5/20060613+lfs/mcrypt.so b6760000 88K r-x-- /usr/lib/php5/20060613+lfs/imap.so b6776000 4K rw--- /usr/lib/php5/20060613+lfs/imap.so b6777000 104K r-x-- /usr/local/lib/libssh2.so b6791000 4K rw--- /usr/local/lib/libssh2.so b6792000 1324K r-x-- /usr/lib/ZendOptimizer.so b68dd000 68K rw--- /usr/lib/ZendOptimizer.so b68ee000 20K rw--- [ anon ] b68f3000 8K r-x-- /usr/lib/libXau.so.6.0.0 b68f5000 4K rw--- /usr/lib/libXau.so.6.0.0 b68f6000 52K r-x-- /usr/lib/php5/20060613+lfs/ssh2.so b6903000 4K rw--- /usr/lib/php5/20060613+lfs/ssh2.so b6904000 252K r---- /usr/lib/locale/en_US.utf8/LC_CTYPE b6974000 64K rw-s- /dev/zero (deleted) b6984000 36K r-x-- /lib/tls/i686/cmov/libnss_files-2.7.so b698d000 8K rw--- /lib/tls/i686/cmov/libnss_files-2.7.so b698f000 32K r-x-- /lib/tls/i686/cmov/libnss_nis-2.7.so b6997000 8K rw--- /lib/tls/i686/cmov/libnss_nis-2.7.so b6999000 28K r-x-- /lib/tls/i686/cmov/libnss_compat-2.7.so b69a0000 8K rw--- /lib/tls/i686/cmov/libnss_compat-2.7.so b69a2000 36K r-x-- /lib/libpam.so.0.81.6 b69ab000 4K rw--- /lib/libpam.so.0.81.6 b69ac000 28K r--s- /usr/lib/gconv/gconv-modules.cache b69b3000 8K r-x-- /usr/lib/apache2/modules/mod_userdir.so b69b5000 4K rw--- /usr/lib/apache2/modules/mod_userdir.so b69b6000 148K r-x-- /usr/lib/apache2/modules/mod_ssl.so b69db000 8K rw--- /usr/lib/apache2/modules/mod_ssl.so b69dd000 8K rw--- [ anon ] b69df000 8K r-x-- /usr/lib/apache2/modules/mod_setenvif.so b69e1000 4K rw--- /usr/lib/apache2/modules/mod_setenvif.so b69e2000 1128K r-x-- /usr/lib/libxml2.so.2.6.31 b6afc000 20K rw--- /usr/lib/libxml2.so.2.6.31 b6b01000 4K rw--- [ anon ] b6b02000 80K r-x-- /lib/tls/i686/cmov/libnsl-2.7.so b6b16000 8K rw--- /lib/tls/i686/cmov/libnsl-2.7.so b6b18000 8K rw--- [ anon ] b6b1a000 140K r-x-- /lib/tls/i686/cmov/libm-2.7.so b6b3d000 8K rw--- /lib/tls/i686/cmov/libm-2.7.so b6b3f000 60K r-x-- /lib/libbz2.so.1.0.4 b6b4e000 4K rw--- /lib/libbz2.so.1.0.4 b6b4f000 4K r-x-- /usr/lib/libxcb-xlib.so.0.0.0 b6b50000 4K rw--- /usr/lib/libxcb-xlib.so.0.0.0 b6b51000 56K r-x-- /usr/lib/apache2/modules/mod_rewrite.so b6b5f000 4K rw--- /usr/lib/apache2/modules/mod_rewrite.so b6b60000 5060K r-x-- /usr/lib/apache2/modules/libphp5.so b7051000 208K rw--- /usr/lib/apache2/modules/libphp5.so b7085000 20K rw--- [ anon ] b708a000 28K r-x-- /usr/lib/apache2/modules/mod_negotiation.so b7091000 4K rw--- /usr/lib/apache2/modules/mod_negotiation.so b7092000 12K r-x-- /usr/lib/apache2/modules/mod_mime.so b7095000 4K rw--- /usr/lib/apache2/modules/mod_mime.so b7096000 36K r-x-- /usr/lib/apache2/modules/mod_include.so b709f000 4K rw--- /usr/lib/apache2/modules/mod_include.so b70a0000 4K r-x-- /usr/lib/apache2/modules/mod_env.so b70a1000 4K rw--- /usr/lib/apache2/modules/mod_env.so b70a2000 4K r-x-- /usr/lib/apache2/modules/mod_dir.so b70a3000 4K rw--- /usr/lib/apache2/modules/mod_dir.so b70a4000 20K r-x-- /usr/lib/apache2/modules/mod_cgi.so b70a9000 4K rw--- /usr/lib/apache2/modules/mod_cgi.so b70aa000 28K r-x-- /usr/lib/apache2/modules/mod_autoindex.so b70b1000 4K rw--- /usr/lib/apache2/modules/mod_autoindex.so b70b2000 4K r-x-- /usr/lib/apache2/modules/mod_authz_user.so b70b3000 4K rw--- /usr/lib/apache2/modules/mod_authz_user.so b70b4000 8K r-x-- /usr/lib/apache2/modules/mod_authz_host.so b70b6000 4K rw--- /usr/lib/apache2/modules/mod_authz_host.so b70b7000 8K r-x-- /usr/lib/apache2/modules/mod_authz_groupfile.so b70b9000 4K rw--- /usr/lib/apache2/modules/mod_authz_groupfile.so b70ba000 8K rw--- [ anon ] b70bc000 12K r-x-- /lib/libgpg-error.so.0.3.0 b70bf000 4K rw--- /lib/libgpg-error.so.0.3.0 b70c0000 4K rw--- [ anon ] b70c1000 8K r-x-- /lib/libkeyutils-1.2.so b70c3000 4K rw--- /lib/libkeyutils-1.2.so b70c4000 28K r-x-- /usr/lib/libkrb5support.so.0.1 b70cb000 4K rw--- /usr/lib/libkrb5support.so.0.1 b70cc000 136K r-x-- /usr/lib/libk5crypto.so.3.1 b70ee000 4K rw--- /usr/lib/libk5crypto.so.3.1 b70ef000 300K r-x-- /lib/libgcrypt.so.11.2.3 b713a000 8K rw--- /lib/libgcrypt.so.11.2.3 b713c000 80K r-x-- /usr/lib/libz.so.1.2.3.3 b7150000 4K rw--- /usr/lib/libz.so.1.2.3.3 b7151000 4K rw--- [ anon ] b7152000 60K r-x-- /usr/lib/libtasn1.so.3.0.12 b7161000 4K rw--- /usr/lib/libtasn1.so.3.0.12 b7162000 160K r-x-- /usr/lib/libgssapi_krb5.so.2.2 b718a000 4K rw--- /usr/lib/libgssapi_krb5.so.2.2 b718b000 8K r-x-- /lib/libcom_err.so.2.1 b718d000 4K rw--- /lib/libcom_err.so.2.1 b718e000 556K r-x-- /usr/lib/libkrb5.so.3.3 b7219000 8K rw--- /usr/lib/libkrb5.so.3.3 b721b000 1192K r-x-- /usr/lib/i686/cmov/libcrypto.so.0.9.8 b7345000 84K rw--- /usr/lib/i686/cmov/libcrypto.so.0.9.8 b735a000 16K rw--- [ anon ] b735e000 248K r-x-- /usr/lib/i686/cmov/libssl.so.0.9.8 b739c000 16K rw--- /usr/lib/i686/cmov/libssl.so.0.9.8 b73a0000 452K r-x-- /usr/lib/libgnutls.so.13.9.1 b7411000 20K rw--- /usr/lib/libgnutls.so.13.9.1 b7416000 88K r-x-- /usr/lib/libsasl2.so.2.0.22 b742c000 4K rw--- /usr/lib/libsasl2.so.2.0.22 b742d000 60K r-x-- /lib/tls/i686/cmov/libresolv-2.7.so b743c000 8K rw--- /lib/tls/i686/cmov/libresolv-2.7.so b743e000 8K rw--- [ anon ] b7440000 8K r-x-- /lib/tls/i686/cmov/libdl-2.7.so b7442000 8K rw--- /lib/tls/i686/cmov/libdl-2.7.so b7444000 36K r-x-- /lib/tls/i686/cmov/libcrypt-2.7.so b744d000 8K rw--- /lib/tls/i686/cmov/libcrypt-2.7.so b744f000 160K rw--- [ anon ] b7477000 28K r-x-- /lib/tls/i686/cmov/librt-2.7.so b747e000 8K rw--- /lib/tls/i686/cmov/librt-2.7.so b7480000 12K r-x-- /lib/libuuid.so.1.2 b7483000 4K rw--- /lib/libuuid.so.1.2 b7484000 124K r-x-- /usr/lib/libexpat.so.1.5.2 b74a3000 8K rw--- /usr/lib/libexpat.so.1.5.2 b74a5000 396K r-x-- /usr/lib/libsqlite3.so.0.8.6 b7508000 8K rw--- /usr/lib/libsqlite3.so.0.8.6 b750a000 120K r-x-- /usr/lib/libpq.so.5.1 b7528000 4K rw--- /usr/lib/libpq.so.5.1 b7529000 1172K r-x-- /usr/lib/libdb-4.6.so b764e000 8K rw--- /usr/lib/libdb-4.6.so b7650000 4K rw--- [ anon ] b7651000 48K r-x-- /usr/lib/liblber-2.4.so.2.0.5 b765d000 4K rw--- /usr/lib/liblber-2.4.so.2.0.5 b765e000 244K r-x-- /usr/lib/libldap_r-2.4.so.2.0.5 b769b000 4K rw--- /usr/lib/libldap_r-2.4.so.2.0.5 b769c000 8K rw--- [ anon ] b769e000 1316K r-x-- /lib/tls/i686/cmov/libc-2.7.so b77e7000 4K r---- /lib/tls/i686/cmov/libc-2.7.so b77e8000 8K rw--- /lib/tls/i686/cmov/libc-2.7.so b77ea000 12K rw--- [ anon ] b77ed000 80K r-x-- /lib/tls/i686/cmov/libpthread-2.7.so b7801000 8K rw--- /lib/tls/i686/cmov/libpthread-2.7.so b7803000 8K rw--- [ anon ] b7805000 136K r-x-- /usr/lib/libapr-1.so.0.2.11 b7827000 4K rw--- /usr/lib/libapr-1.so.0.2.11 b7828000 4K rw--- [ anon ] b7829000 100K r-x-- /usr/lib/libaprutil-1.so.0.2.11 b7842000 4K rw--- /usr/lib/libaprutil-1.so.0.2.11 b7843000 152K r-x-- /usr/lib/libpcre.so.3.12.1 b7869000 4K rw--- /usr/lib/libpcre.so.3.12.1 b786a000 4K r-x-- /usr/lib/apache2/modules/mod_authz_default.so b786b000 4K rw--- /usr/lib/apache2/modules/mod_authz_default.so b786c000 4K r-x-- /usr/lib/apache2/modules/mod_authn_file.so b786d000 4K rw--- /usr/lib/apache2/modules/mod_authn_file.so b786e000 24K r-x-- /usr/lib/apache2/modules/mod_auth_digest.so b7874000 4K rw--- /usr/lib/apache2/modules/mod_auth_digest.so b7875000 8K r-x-- /usr/lib/apache2/modules/mod_auth_basic.so b7877000 4K rw--- /usr/lib/apache2/modules/mod_auth_basic.so b7878000 8K r-x-- /usr/lib/apache2/modules/mod_alias.so b787a000 4K rw--- /usr/lib/apache2/modules/mod_alias.so b787b000 8K rw--- [ anon ] b787d000 4K r-x-- [ anon ] b787e000 104K r-x-- /lib/ld-2.7.so b7898000 8K rw--- /lib/ld-2.7.so bfd68000 76K rwx-- [ stack ] bfd7b000 8K rw--- [ anon ] total 119008K I have no idea what's going on. I've tried adjusting the usual parameters (MaxClients, MaxRequestsPerClient, etc, but those don't do anything.) Note, also, that this is memory usage on startup - it doesn't grow, it just starts like this and then stays more or less constant. Ideas?

  Read the article

• GRUB doesn't recognize partitions on one harddisk

  - by knizz

  I have a dualboot computer with Windows Vista (on hd0) and Ubuntu 9.10. The bootloader is GRUB and the windows bootloader lets me decide between Vista and Ubuntu-Installation (broken WuBi). But now (i don't know why that changed) I can't use start the windows-bootloader anymore. I tried "ls" on the grub-prompt and it gave me a list like: (hd0) (hd1) (hd1,0) (hd1,1) (hd1,2) ... (fd0) It recognizes all partitions of hd1 (the ubuntu-harddisk) but not of hd0(the win-disk). .. WHY? Here is the result of the "boot info script" for the technical details: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=a7c510e3-2399-437b-ab92-fa609e48d63f)/boot/grub. => No boot loader is installed in the MBR of /dev/sdb sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows Vista Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe /wubildr.mbr /wubildr sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unbekannter Dateisystemtyp „“ sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: Bios Boot Partition Boot sector type: - Boot sector info: sdb4: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 9.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Platte /dev/sda: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x52554d66 Partition Boot Start End Size Id System /dev/sda1 * 2,048 307,202,047 307,200,000 7 HPFS/NTFS /dev/sda2 307,202,048 1,250,258,943 943,056,896 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Platte /dev/sdb: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x00000000 Partition Boot Start End Size Id System /dev/sdb1 1 1,250,263,727 1,250,263,727 ee GPT GUID Partition Table detected. Partition Start End Size System /dev/sdb1 34 262,177 262,144 Microsoft Windows /dev/sdb2 262,178 1,131,253,933 1,130,991,756 Linux or Data /dev/sdb3 1,131,253,934 1,131,255,887 1,954 Bios Boot Partition /dev/sdb4 1,131,255,888 1,245,312,528 114,056,641 Linux or Data /dev/sdb5 1,245,312,529 1,250,263,694 4,951,166 Linux Swap blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 AE1440441440122F ntfs /dev/sda2 3AE66E4DE66E0A09 ntfs data /dev/sdb2 5419D16119DAA4DE ntfs LaufwerkD /dev/sdb4 a7c510e3-2399-437b-ab92-fa609e48d63f ext4 /dev/sdb5 60a0143a-e01b-450a-bbd1-f22059e47b65 swap ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb4 / ext4 (rw,errors=remount-ro) =========================== sdb4/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s /boot/grub/grubenv ]; then have_grubenv=true load_env fi set default="0" if [ ${prev_saved_entry} ]; then saved_entry=${prev_saved_entry} save_env saved_entry prev_saved_entry= save_env prev_saved_entry fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/white ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry "Ubuntu, Linux 2.6.31-20-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-14-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" { insmod ntfs set root=(hd0,1) search --no-floppy --fs-uuid --set ae1440441440122f chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### =============================== sdb4/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sdb4 during installation UUID=a7c510e3-2399-437b-ab92-fa609e48d63f / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb5 during installation UUID=60a0143a-e01b-450a-bbd1-f22059e47b65 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 =================== sdb4: Location of files loaded by Grub: =================== 583.8GB: boot/grub/core.img 583.8GB: boot/grub/grub.cfg 579.7GB: boot/initrd.img-2.6.31-14-generic 580.0GB: boot/initrd.img-2.6.31-20-generic 579.7GB: boot/vmlinuz-2.6.31-14-generic 579.8GB: boot/vmlinuz-2.6.31-20-generic 580.0GB: initrd.img 579.7GB: initrd.img.old 579.8GB: vmlinuz 579.7GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sdb1 00000000 54 34 dc 3b 8b ff 6c fa 3e 59 3d 24 25 af 5f 9b |T4.;..l.>Y=$%._.| 00000010 72 f8 36 3d 56 30 22 fd c6 08 5e 39 7f dc 29 48 |r.6=V0"...^9..)H| 00000020 48 e5 24 52 77 b0 fc 64 b6 ce 48 c3 07 ce b5 81 |H.$Rw..d..H.....| 00000030 06 68 60 4f 6e fb 83 92 df 3a 54 b9 df 21 2a cd |.h`On....:T..!*.| 00000040 1e 2f e2 49 fe cf 81 2d 52 17 1a 4e 66 b4 f3 f0 |./.I...-R..Nf...| 00000050 41 25 e3 96 26 28 fe 19 61 72 75 f8 40 a3 b7 ef |A%..&(..aru.@...| 00000060 5f 79 dc cb 28 44 44 7c 9b 9a 7b 6c 4b 4b 60 0f |_y..(DD|..{lKK`.| 00000070 a9 97 87 bc 85 9f db bb d2 1a 88 9f aa 49 18 d5 |.............I..| 00000080 92 2d db 7e fe f7 8d 7a 18 c0 33 c5 bd 7a 46 07 |.-.~...z..3..zF.| 00000090 c8 27 13 66 94 49 62 9f bc 99 56 55 25 fb 94 a9 |.'.f.Ib...VU%...| 000000a0 3f b2 a7 0a 87 d0 a4 4e 51 f1 09 02 c4 29 eb ff |?......NQ....)..| 000000b0 26 3b 51 3e 5a 0c db ee a6 57 a7 c3 ba a1 74 90 |&;Q>Z....W....t.| 000000c0 ee 70 08 18 cc b8 d0 22 ce 96 c7 cb 68 40 98 20 |.p....."....h@. | 000000d0 49 3d 07 ec df d1 8d cf 19 bc 42 90 70 24 01 b4 |I=........B.p$..| 000000e0 28 cf c6 50 d3 95 5a 1b 18 15 33 c7 b2 a8 95 92 |(..P..Z...3.....| 000000f0 bb 93 fe 18 2b 81 c1 6b 9c 30 f1 65 50 6a 80 3d |....+..k.0.ePj.=| 00000100 74 37 a8 59 a6 51 8a 63 b6 d8 16 9f a9 47 2a 7c |t7.Y.Q.c.....G*|| 00000110 04 a7 fe 69 47 02 bf e9 b7 1b 7a ea 60 5c 3c 53 |...iG.....z.`\<S| 00000120 5b 10 78 dc 4d d2 a8 22 30 45 37 fb 56 06 9f 06 |[.x.M.."0E7.V...| 00000130 aa df cf 87 3a 3e cf 72 f2 e5 a6 c6 aa e2 7c 1c |....:>.r......|.| 00000140 64 c2 fc 80 ce 02 fc 7f 0f c6 60 81 bf cd 3b 5a |d.........`...;Z| 00000150 37 a5 38 1b 0c 1b 39 2e d6 f6 3d a2 36 e5 87 c3 |7.8...9...=.6...| 00000160 17 b5 fd ee 33 c7 ce a3 d9 c2 57 dc ee 85 48 9d |....3.....W...H.| 00000170 33 60 02 cd c5 83 44 44 ea b6 07 25 0a 4b a6 6e |3`....DD...%.K.n| 00000180 fc 51 42 cd 84 0b 65 b6 19 a1 e5 b2 eb 14 0c fa |.QB...e.........| 00000190 24 77 f5 44 6e 5d 39 dd b6 8e cc f8 30 fe 21 46 |$w.Dn]9.....0.!F| 000001a0 9c ff 95 c6 c7 b5 0a df 54 ca d2 ac bc 64 d0 97 |........T....d..| 000001b0 94 54 d9 29 0f 91 60 20 c3 e4 53 c2 b0 e4 40 72 |.T.)..` ..S...@r| 000001c0 7e 25 bc 81 06 ad 05 46 14 a7 e6 71 6b 5c db 9c |~%.....F...qk\..| 000001d0 0a 5e 76 23 ae 06 01 36 98 21 65 2c 90 e7 4b 1a |.^v#...6.!e,..K.| 000001e0 2a 2d 80 a5 48 db 9e 14 e0 9f e9 aa 00 e3 77 32 |*-..H.........w2| 000001f0 0f fd 94 db 55 a6 64 46 be ae ca de da ee 89 68 |....U.dF.......h| 00000200 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde

  Read the article

• UAC being turned off once a day on Windows 7

  - by Mehper C. Palavuzlar

  I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. Actually, this does not happen if it happened once on a specific day. For example, when I start the machine in the morning, it shows up; but it never shows up in the subsequent restarts within that day. On the next day, the same thing happens again. I never disable UAC, but obviously some rootkit or virus causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I can't fix it. First, I have run a full scan on the computer for any probable virus and malware/rootkit activity, but TrendMicro OfficeScan said that no viruses have been found. I went to an old Restore Point using Windows System Restore, but the problem was not solved. What I have tried so far (which couldn't find the rootkit): TrendMicro OfficeScan Antivirus AVAST Malwarebytes' Anti-malware Ad-Aware Vipre Antivirus GMER TDSSKiller (Kaspersky Labs) HiJackThis RegRuns UnHackMe SuperAntiSpyware Portable Tizer Rootkit Razor (*) Sophos Anti-Rootkit SpyHunter 4 There are no other strange activities on the machine. Everything works fine except this bizarre incident. What could be the name of this annoying rootkit? How can I detect and remove it? EDIT: Below is the log file generated by HijackThis: Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 13:07:04, on 17.01.2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal Running processes: C:\Windows\system32\taskhost.exe C:\Windows\system32\Dwm.exe C:\Windows\Explorer.EXE C:\Program Files\CheckPoint\SecuRemote\bin\SR_GUI.Exe C:\Windows\System32\igfxtray.exe C:\Windows\System32\hkcmd.exe C:\Windows\system32\igfxsrvc.exe C:\Windows\System32\igfxpers.exe C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe C:\Program Files\Synaptics\SynTP\SynTPEnh.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe C:\Program Files\Analog Devices\Core\smax4pnp.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\VolCtrl.exe C:\Program Files\LightningFAX\LFclient\lfsndmng.exe C:\Program Files\Common Files\Java\Java Update\jusched.exe C:\Program Files\Microsoft Office Communicator\communicator.exe C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe C:\Program Files\Trend Micro\OfficeScan Client\PccNTMon.exe C:\Program Files\Microsoft LifeCam\LifeExp.exe C:\Program Files\Hewlett-Packard\Shared\HpqToaster.exe C:\Program Files\Windows Sidebar\sidebar.exe C:\Program Files\mimio\mimio Studio\system\aps_tablet\atwtusb.exe C:\Program Files\Microsoft Office\Office12\OUTLOOK.EXE C:\Program Files\Babylon\Babylon-Pro\Babylon.exe C:\Program Files\Mozilla Firefox\firefox.exe C:\Users\userx\Desktop\HijackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = about:blank R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,AutoConfigURL = http://www.yaysat.com.tr/proxy/proxy.pac R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: Babylon IE plugin - {9CFACCB6-2F3F-4177-94EA-0D2B72D384C1} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe O4 - HKLM\..\Run: [HotKeysCmds] C:\Windows\system32\hkcmd.exe O4 - HKLM\..\Run: [Persistence] C:\Windows\system32\igfxpers.exe O4 - HKLM\..\Run: [hpWirelessAssistant] C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe O4 - HKLM\..\Run: [SynTPEnh] C:\Program Files\Synaptics\SynTP\SynTPEnh.exe O4 - HKLM\..\Run: [QlbCtrl.exe] C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exe /Start O4 - HKLM\..\Run: [SoundMAXPnP] C:\Program Files\Analog Devices\Core\smax4pnp.exe O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [lfsndmng] C:\Program Files\LightningFAX\LFclient\LFSNDMNG.EXE O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Common Files\Java\Java Update\jusched.exe" O4 - HKLM\..\Run: [Communicator] "C:\Program Files\Microsoft Office Communicator\communicator.exe" /fromrunkey O4 - HKLM\..\Run: [AgentUiRunKey] "C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe" -ni -sss -e http://localhost:16386/ O4 - HKLM\..\Run: [OfficeScanNT Monitor] "C:\Program Files\Trend Micro\OfficeScan Client\pccntmon.exe" -HideWindow O4 - HKLM\..\Run: [Babylon Client] C:\Program Files\Babylon\Babylon-Pro\Babylon.exe -AutoStart O4 - HKLM\..\Run: [LifeCam] "C:\Program Files\Microsoft LifeCam\LifeExp.exe" O4 - HKCU\..\Run: [Sidebar] C:\Program Files\Windows Sidebar\sidebar.exe /autoRun O4 - Global Startup: mimio Studio.lnk = C:\Program Files\mimio\mimio Studio\mimiosys.exe O8 - Extra context menu item: Microsoft Excel'e &Ver - res://C:\PROGRA~1\MICROS~1\Office12\EXCEL.EXE/3000 O8 - Extra context menu item: Translate this web page with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/ActionTU.htm O8 - Extra context menu item: Translate with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/Action.htm O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~1\Office12\REFIEBAR.DLL O9 - Extra button: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O9 - Extra 'Tools' menuitem: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O16 - DPF: {00134F72-5284-44F7-95A8-52A619F70751} (ObjWinNTCheck Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/WinNTChk.cab O16 - DPF: {08D75BC1-D2B5-11D1-88FC-0080C859833B} (OfficeScan Corp Edition Web-Deployment SetupCtrl Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/setup.cab O17 - HKLM\System\CCS\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\Software\..\Telephony: DomainName = yaysat.com O17 - HKLM\System\CS1\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\System\CS2\Services\Tcpip\Parameters: Domain = yaysat.com O18 - Protocol: qcom - {B8DBD265-42C3-43E6-B439-E968C71984C6} - C:\Program Files\Common Files\Quest Shared\CodeXpert\qcom.dll O22 - SharedTaskScheduler: FencesShellExt - {1984DD45-52CF-49cd-AB77-18F378FEA264} - C:\Program Files\Stardock\Fences\FencesMenu.dll O23 - Service: Andrea ADI Filters Service (AEADIFilters) - Andrea Electronics Corporation - C:\Windows\system32\AEADISRV.EXE O23 - Service: AgentService - Iron Mountain Incorporated - C:\Program Files\Iron Mountain\Connected BackupPC\AgentService.exe O23 - Service: Agere Modem Call Progress Audio (AgereModemAudio) - LSI Corporation - C:\Program Files\LSI SoftModem\agrsmsvc.exe O23 - Service: BMFMySQL - Unknown owner - C:\Program Files\Quest Software\Benchmark Factory for Databases\Repository\MySQL\bin\mysqld-max-nt.exe O23 - Service: Com4QLBEx - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\Com4QLBEx.exe O23 - Service: hpqwmiex - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\Shared\hpqwmiex.exe O23 - Service: OfficeScanNT RealTime Scan (ntrtscan) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\ntrtscan.exe O23 - Service: SMS Task Sequence Agent (smstsmgr) - Unknown owner - C:\Windows\system32\CCM\TSManager.exe O23 - Service: Check Point VPN-1 Securemote service (SR_Service) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Service.exe O23 - Service: Check Point VPN-1 Securemote watchdog (SR_Watchdog) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Watchdog.exe O23 - Service: Trend Micro Unauthorized Change Prevention Service (TMBMServer) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\..\BM\TMBMSRV.exe O23 - Service: OfficeScan NT Listener (tmlisten) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\tmlisten.exe O23 - Service: OfficeScan NT Proxy Service (TmProxy) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\TmProxy.exe O23 - Service: VNC Server Version 4 (WinVNC4) - RealVNC Ltd. - C:\Program Files\RealVNC\VNC4\WinVNC4.exe -- End of file - 8204 bytes As suggested in this very similar question, I have run full scans (+boot time scans) with RegRun and UnHackMe, but they also did not find anything. I have carefully examined all entries in the Event Viewer, but there's nothing wrong. Now I know that there is a hidden trojan (rootkit) on my machine which seems to disguise itself quite successfully. Note that I don't have the chance to remove the HDD, or reinstall the OS as this is a work machine subjected to certain IT policies on a company domain. Despite all my attempts, the problem still remains. I strictly need a to-the-point method or a pukka rootkit remover to remove whatever it is. I don't want to monkey with the system settings, i.e. disabling auto runs one by one, messing the registry, etc. EDIT 2: I have found an article which is closely related to my trouble: Malware can turn off UAC in Windows 7; “By design” says Microsoft. Special thanks(!) to Microsoft. In the article, a VBScript code is given to disable UAC automatically: '// 1337H4x Written by _____________ '// (12 year old) Set WshShell = WScript.CreateObject("WScript.Shell") '// Toggle Start menu WshShell.SendKeys("^{ESC}") WScript.Sleep(500) '// Search for UAC applet WshShell.SendKeys("change uac") WScript.Sleep(2000) '// Open the applet (assuming second result) WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{ENTER}") WScript.Sleep(2000) '// Set UAC level to lowest (assuming out-of-box Default setting) WshShell.SendKeys("{TAB}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") '// Save our changes WshShell.SendKeys("{TAB}") WshShell.SendKeys("{ENTER}") '// TODO: Add code to handle installation of rebound '// process to continue exploitation, i.e. place something '// evil in Startup folder '// Reboot the system '// WshShell.Run "shutdown /r /f" Unfortunately, that doesn't tell me how I can get rid of this malicious code running on my system. EDIT 3: Last night, I left the laptop open because of a running SQL task. When I came in the morning, I saw that UAC was turned off. So, I suspect that the problem is not related to startup. It is happening once a day for sure no matter if the machine is rebooted.

  Read the article

• Form contents not showing in email

  - by fmz

  This is a followup to a question I posted yesterday. I thought everything was working fine, but today, I am not getting any results in the email from the drop down field. Here is the form code in question: <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" name="purpose" style="width: 300px; height:35px;"> <option value="" selected="selected">-- Select One --</option> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> It is then processed in PHP and should output the selected option to an email, however the Reason for Contact line always comes through with nothing in it. Here is the PHP code: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> Any assistance would be greatly appreciated. Thanks!

  Read the article

• Why "menus" unit is finalized too early?

  - by Harriv

  I tested my application with FastMM and FullDebugMode turned on, since I had some shutdown problems. After solving bunch of my own problems FastMM started to complain about calling virtual method on a freed object in TPopupList. I tried to move the menus unit as early as possible in uses so that it would be finalized last, but it didn't help. Is this real problem, a bug in vcl or false alarm from FastMM? Here's the full report from FastMM: FastMM has detected an attempt to call a virtual method on a freed object. An access violation will now be raised in order to abort the current operation. Freed object class: TPopupList Virtual method: Offset +16 Virtual method address: 4714E4 The allocation number was: 220 The object was allocated by thread 0x1CC0, and the stack trace (return addresses) at the time was: 403216 [sys\system.pas][System][System.@GetMem][2654] 404A4F [sys\system.pas][System][System.TObject.NewInstance][8807] 404E16 [sys\system.pas][System][System.@ClassCreate][9472] 404A84 [sys\system.pas][System][System.TObject.Create][8822] 7F2602 [Menus.pas][Menus][Menus.Menus][4223] 40570F [sys\system.pas][System][System.InitUnits][11397] 405777 [sys\system.pas][System][System.@StartExe][11462] 40844F [SysInit.pas][SysInit][SysInit.@InitExe][663] 7F6368 [PCCSServer.dpr][PCCSServer][PCCSServer.PCCSServer][148] 7C90DCBA [ZwSetInformationThread] 7C817077 [Unknown function at RegisterWaitForInputIdle] The object was subsequently freed by thread 0x1CC0, and the stack trace (return addresses) at the time was: 403232 [sys\system.pas][System][System.@FreeMem][2699] 404A6D [sys\system.pas][System][System.TObject.FreeInstance][8813] 404E61 [sys\system.pas][System][System.@ClassDestroy][9513] 428D15 [common\Classes.pas][Classes][Classes.TList.Destroy][2914] 404AB3 [sys\system.pas][System][System.TObject.Free][8832] 472091 [Menus.pas][Menus][Menus.Finalization][4228] 4056A7 [sys\system.pas][System][System.FinalizeUnits][11256] 4056BF [sys\system.pas][System][System.FinalizeUnits][11261] 7C9032A8 [RtlConvertUlongToLargeInteger] 7C90327A [RtlConvertUlongToLargeInteger] 7C92AA0F [Unknown function at towlower] The current thread ID is 0x1CC0, and the stack trace (return addresses) leading to this error is: 4714B8 [Menus.pas][Menus][Menus.TPopupList.MainWndProc][3779] 435BB2 [common\Classes.pas][Classes][Classes.StdWndProc][11583] 7E418734 [Unknown function at GetDC] 7E418816 [Unknown function at GetDC] 7E428EA0 [Unknown function at DefWindowProcW] 7E428EEC [Unknown function at DefWindowProcW] 7C90E473 [KiUserCallbackDispatcher] 7E42B1A8 [DestroyWindow] 47CE31 [Controls.pas][Controls][Controls.TWinControl.DestroyWindowHandle][6857] 493BE4 [Forms.pas][Forms][Forms.TCustomForm.DestroyWindowHandle][4564] 4906D9 [Forms.pas][Forms][Forms.TCustomForm.Destroy][2929] Current memory dump of 256 bytes starting at pointer address 7FF9CFF0: 2C FE 82 00 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 C4 A3 2D 0C 00 00 00 00 B1 D0 F9 7F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 C0 00 00 00 16 32 40 00 9D 5B 40 00 C8 5B 40 00 CE 82 40 00 3C 40 91 7C B0 B1 94 7C 0A 77 92 7C 84 77 92 7C 7C F0 96 7C 94 B3 94 7C 84 77 92 7C C0 1C 00 00 32 32 40 00 12 5B 40 00 EF 69 40 00 BA 20 47 00 A7 56 40 00 BF 56 40 00 A8 32 90 7C 7A 32 90 7C 0F AA 92 7C 0A 77 92 7C 84 77 92 7C C0 1C 00 00 0E 00 00 00 00 00 00 00 C7 35 65 59 2C FE 82 00 80 80 80 80 80 80 80 80 80 80 38 CA 9A A6 80 80 80 80 80 80 00 00 00 00 51 D1 F9 7F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 C1 00 00 00 16 32 40 00 9D 5B 40 00 C8 5B 40 00 CE 82 40 00 3C 40 91 7C B0 B1 94 7C 0A 77 92 7C 84 77 92 7C 7C F0 96 7C 94 B3 94 7C 84 77 92 7C , þ ‚ . € € € € € € € € € € € € € € € € Ä £ - . . . . . ± Ð ù . . . . . . . . . . . . . . . . À . . . . 2 @ . [ @ . È [ @ . Î ‚ @ . < @ ‘ | ° ± ” | . w ’ | „ w ’ | | ð – | ” ³ ” | „ w ’ | À . . . 2 2 @ . . [ @ . ï i @ . º G . § V @ . ¿ V @ . ¨ 2 | z 2 | . ª ’ | . w ’ | „ w ’ | À . . . . . . . . . . . Ç 5 e Y , þ ‚ . € € € € € € € € € € 8 Ê š ¦ € € € € € € . . . . Q Ñ ù . . . . . . . . . . . . . . . . Á . . . . 2 @ . [ @ . È [ @ . Î ‚ @ . < @ ‘ | ° ± ” | . w ’ | „ w ’ | | ð – | ” ³ ” | „ w ’ | I'm using Delphi 2007 and FastMM 4.97.

  Read the article

• Did I lose my RAID again?

  - by BarsMonster

  Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful that it even can reshape arrays, so you can start with a smaller array and then grow it as you need. I've bought 3x1Tb drives and made a RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as spares and run a command to grow array to 7-disks. It started working, but speed was ridiculously slow, ~100kb/sec. After processing first 37Mb at such an amazing speed, one of old HDDs fails. I properly shutdown the PC and disconnected the failed drive. After bootup it appeared that it recreated the intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlock, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lose my data again? Any suggestions on how can I make this work? OS is Ubuntu Server 10.04.2. PS. Needless to say, the data is inaccessible - I cannot mount /dev/md0 to save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it. Update: It appears there is some nice info in kern.log: 21:38:48 ...: [ 166.522055] raid5: reshape will continue 21:38:48 ...: [ 166.522085] raid5: device sdb1 operational as raid disk 1 21:38:48 ...: [ 166.522091] raid5: device sdg1 operational as raid disk 4 21:38:48 ...: [ 166.522097] raid5: device sdf1 operational as raid disk 5 21:38:48 ...: [ 166.522102] raid5: device sde1 operational as raid disk 6 21:38:48 ...: [ 166.522107] raid5: device sdd1 operational as raid disk 0 21:38:48 ...: [ 166.522111] raid5: device sdc1 operational as raid disk 3 21:38:48 ...: [ 166.523942] raid5: allocated 7438kB for md0 21:38:48 ...: [ 166.524041] 1: w=1 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524050] 4: w=2 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524056] 5: w=3 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524062] 6: w=4 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524068] 0: w=5 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524073] 3: w=6 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524079] raid5: raid level 6 set md0 active with 6 out of 7 devices, algorithm 2 21:38:48 ...: [ 166.524519] RAID5 conf printout: 21:38:48 ...: [ 166.524523] --- rd:7 wd:6 21:38:48 ...: [ 166.524528] disk 0, o:1, dev:sdd1 21:38:48 ...: [ 166.524532] disk 1, o:1, dev:sdb1 21:38:48 ...: [ 166.524537] disk 3, o:1, dev:sdc1 21:38:48 ...: [ 166.524541] disk 4, o:1, dev:sdg1 21:38:48 ...: [ 166.524545] disk 5, o:1, dev:sdf1 21:38:48 ...: [ 166.524550] disk 6, o:1, dev:sde1 21:38:48 ...: [ 166.524553] ...ok start reshape thread 21:38:48 ...: [ 166.524727] md0: detected capacity change from 0 to 2999995858944 21:38:48 ...: [ 166.524735] md: reshape of RAID array md0 21:38:48 ...: [ 166.524740] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. 21:38:48 ...: [ 166.524745] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reshape. 21:38:48 ...: [ 166.524756] md: using 128k window, over a total of 976561152 blocks. 21:39:05 ...: [ 166.525013] md0: 21:42:04 ...: [ 362.520063] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520068] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520073] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:42:04 ...: [ 362.520083] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520092] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:42:04 ...: [ 362.520100] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:42:04 ...: [ 362.520107] Call Trace: 21:42:04 ...: [ 362.520133] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520148] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520159] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:42:04 ...: [ 362.520169] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:42:04 ...: [ 362.520179] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520188] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520194] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520205] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:42:04 ...: [ 362.520214] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:42:04 ...: [ 362.520222] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:42:04 ...: [ 362.520230] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:42:04 ...: [ 362.520236] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:42:04 ...: [ 362.520244] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:42:04 ...: [ 362.520251] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:42:04 ...: [ 362.520258] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:42:04 ...: [ 362.520265] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:42:04 ...: [ 362.520272] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:42:04 ...: [ 362.520279] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:42:04 ...: [ 362.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520290] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520297] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:42:04 ...: [ 362.520304] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:42:04 ...: [ 362.520310] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:42:04 ...: [ 362.520317] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:42:04 ...: [ 362.520324] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:42:04 ...: [ 362.520331] [<ffffffff811a7938>] check_partition+0x138/0x190 21:42:04 ...: [ 362.520338] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:42:04 ...: [ 362.520344] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:42:04 ...: [ 362.520350] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520356] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520362] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520369] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520377] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520385] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520391] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520398] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520406] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:42:04 ...: [ 362.520414] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520421] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520428] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520437] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520446] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520450] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520454] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:42:04 ...: [ 362.520462] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520470] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:42:04 ...: [ 362.520478] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:42:04 ...: [ 362.520485] Call Trace: 21:42:04 ...: [ 362.520495] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520502] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520508] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:42:04 ...: [ 362.520514] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:42:04 ...: [ 362.520520] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:42:04 ...: [ 362.520527] [<ffffffff81145375>] __fput+0xf5/0x210 21:42:04 ...: [ 362.520534] [<ffffffff811454b5>] fput+0x25/0x30 21:42:04 ...: [ 362.520540] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:42:04 ...: [ 362.520546] [<ffffffff81141697>] sys_close+0xb7/0x120 21:42:04 ...: [ 362.520553] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520559] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520563] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520567] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:42:04 ...: [ 362.520575] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520582] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:42:04 ...: [ 362.520590] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:42:04 ...: [ 362.520597] Call Trace: 21:42:04 ...: [ 362.520608] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520616] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520626] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:42:04 ...: [ 362.520634] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520644] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:42:04 ...: [ 362.520651] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:42:04 ...: [ 362.520658] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:42:04 ...: [ 362.520668] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:42:04 ...: [ 362.520675] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:42:04 ...: [ 362.520681] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520688] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:42:04 ...: [ 362.520694] [<ffffffff81084416>] kthread+0x96/0xa0 21:42:04 ...: [ 362.520701] [<ffffffff810131ea>] child_rip+0xa/0x20 21:42:04 ...: [ 362.520707] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:42:04 ...: [ 362.520713] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:42:04 ...: [ 362.520718] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520721] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520725] mdadm D 0000000000000000 0 2288 1 0x00000000 21:42:04 ...: [ 362.520733] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520741] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:42:04 ...: [ 362.520748] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:42:04 ...: [ 362.520755] Call Trace: 21:42:04 ...: [ 362.520763] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520771] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:42:04 ...: [ 362.520777] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520783] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:42:04 ...: [ 362.520790] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520795] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520801] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520808] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520815] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520821] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520828] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520834] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520841] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:42:04 ...: [ 362.520848] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:42:04 ...: [ 362.520855] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:42:04 ...: [ 362.520862] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520868] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520874] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520882] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520065] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520077] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:44:04 ...: [ 482.520087] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520096] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:44:04 ...: [ 482.520104] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:44:04 ...: [ 482.520112] Call Trace: 21:44:04 ...: [ 482.520139] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520154] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520165] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:44:04 ...: [ 482.520175] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:44:04 ...: [ 482.520185] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520194] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520201] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520212] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:44:04 ...: [ 482.520221] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:44:04 ...: [ 482.520229] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:44:04 ...: [ 482.520237] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:44:04 ...: [ 482.520244] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:44:04 ...: [ 482.520252] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:44:04 ...: [ 482.520258] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:44:04 ...: [ 482.520266] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:44:04 ...: [ 482.520273] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:44:04 ...: [ 482.520280] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:44:04 ...: [ 482.520286] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:44:04 ...: [ 482.520293] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520299] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520306] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:44:04 ...: [ 482.520313] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:44:04 ...: [ 482.520319] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:44:04 ...: [ 482.520327] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:44:04 ...: [ 482.520334] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:44:04 ...: [ 482.520341] [<ffffffff811a7938>] check_partition+0x138/0x190 21:44:04 ...: [ 482.520348] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:44:04 ...: [ 482.520355] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:44:04 ...: [ 482.520361] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520367] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520373] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520380] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520388] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520396] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520403] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520410] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520417] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:44:04 ...: [ 482.520426] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520432] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520438] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520447] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520458] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520462] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520467] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:44:04 ...: [ 482.520475] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520483] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:44:04 ...: [ 482.520490] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:44:04 ...: [ 482.520498] Call Trace: 21:44:04 ...: [ 482.520508] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520515] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520521] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:44:04 ...: [ 482.520527] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:44:04 ...: [ 482.520533] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:44:04 ...: [ 482.520541] [<ffffffff81145375>] __fput+0xf5/0x210 21:44:04 ...: [ 482.520547] [<ffffffff811454b5>] fput+0x25/0x30 21:44:04 ...: [ 482.520554] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:44:04 ...: [ 482.520560] [<ffffffff81141697>] sys_close+0xb7/0x120 21:44:04 ...: [ 482.520568] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520574] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520578] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520582] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:44:04 ...: [ 482.520590] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520597] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:44:04 ...: [ 482.520605] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:44:04 ...: [ 482.520612] Call Trace: 21:44:04 ...: [ 482.520623] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520633] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520643] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:44:04 ...: [ 482.520651] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520661] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:44:04 ...: [ 482.520668] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:44:04 ...: [ 482.520675] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:44:04 ...: [ 482.520685] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:44:04 ...: [ 482.520692] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:44:04 ...: [ 482.520699] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520705] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:44:04 ...: [ 482.520711] [<ffffffff81084416>] kthread+0x96/0xa0 21:44:04 ...: [ 482.520718] [<ffffffff810131ea>] child_rip+0xa/0x20 21:44:04 ...: [ 482.520725] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:44:04 ...: [ 482.520730] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:44:04 ...: [ 482.520735] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520739] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520743] mdadm D 0000000000000000 0 2288 1 0x00000000 21:44:04 ...: [ 482.520751] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520759] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:44:04 ...: [ 482.520767] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:44:04 ...: [ 482.520774] Call Trace: 21:44:04 ...: [ 482.520782] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520790] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:44:04 ...: [ 482.520797] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520804] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:44:04 ...: [ 482.520810] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520816] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520822] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520829] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520837] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520843] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520850] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520857] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520864] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:44:04 ...: [ 482.520871] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:44:04 ...: [ 482.520878] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:44:04 ...: [ 482.520885] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520891] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520897] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520905] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520053] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520059] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520065] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:46:04 ...: [ 602.520075] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520084] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:46:04 ...: [ 602.520091] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:46:04 ...: [ 602.520099] Call Trace: 21:46:04 ...: [ 602.520127] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:46:04 ...: [ 602.520142] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:46:04 ...: [ 602.520153] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:46:04 ...: [ 602.520162] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:46:04 ...: [ 602.520171] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:46:04 ...: [ 602.520180] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520187] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520197] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:46:04 ...: [ 602.520206] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:46:04 ...: [ 602.520215] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:46:04 ...: [ 602.520222] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:46:04 ...: [ 602.520229] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:46:04 ...: [ 602.520237] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:46:04 ...: [ 602.520244] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:46:04 ...: [ 602.520252] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:46:04 ...: [ 602.520259] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:46:04 ...: [ 602.520266] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:46:04 ...: [ 602.520273] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:46:04 ...: [ 602.520279] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520292] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:46:04 ...: [ 602.520300] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:46:04 ...: [ 602.520306] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:46:04 ...: [ 602.520314] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:46:04 ...: [ 602.520321] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:46:04 ...: [ 602.520328] [<ffffffff811a7938>] check_partition+0x138/0x190 21:46:04 ...: [ 602.520335] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:46:04 ...: [ 602.520342] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:46:04 ...: [ 602.520348] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:46:04 ...: [ 602.520354] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:46:04 ...: [ 602.520359] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:46:04 ...: [ 602.520367] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:46:04 ...: [ 602.520375] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:46:04 ...: [ 602.520383] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:46:04 ...: [ 602.520390] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:46:04 ...: [ 602.520397] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:46:04 ...: [ 602.520404] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:46:04 ...: [ 602.520413] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:46:04 ...: [ 602.520419] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:46:04 ...: [ 602.520425] [<ffffffff811418b0>] sys_open+0x20/0x30 21:46:04 ...: [ 602.520434] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520443] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520447] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520451] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:46:04 ...: [ 602.520460] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520468] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:46:04 ...: [ 602.520475] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:46:04 ...: [ 602.520483] Call Trace: 21:46:04 ...: [ 602.520492] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:46:04 ...: [ 602.520500] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:46:04 ...: [ 602.520506] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:46:04 ...: [ 602.520512] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:46:04 ...: [ 602.520518] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:46:04 ...: [ 602.520526] [<ffffffff81145375>] __fput+0xf5/0x210 21:46:04 ...: [ 602.520533] [<ffffffff811454b5>] fput+0x25/0x30 21:46:04 ...: [ 602.520539] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:46:04 ...: [ 602.520545] [<ffffffff81141697>] sys_close+0xb7/0x120 21:46:04 ...: [ 602.520552] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b

  Read the article

• Debian squeeze keyboard and touchpad not working / detected on laptop

  - by Esa

  They work before gdm3 starts. a connected mouse also stops working, but functions after removal and re-plug. no xorg.conf. log doesn't show any loading of drivers for kbd/touchpad [ 33.783] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 33.783] X Protocol Version 11, Revision 0 [ 33.783] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian [ 33.783] Current Operating System: Linux sus 3.2.0-0.bpo.2-amd64 #1 SMP Sun Mar 25 10:33:35 UTC 2012 x86_64 [ 33.783] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=8686f840-d165-4d1e-b995-2ebbd94aa3d2 ro quiet [ 33.783] Build Date: 28 August 2011 09:39:43PM [ 33.783] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <[email protected]>) [ 33.783] Current version of pixman: 0.16.4 [ 33.783] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 33.783] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 33.783] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 28 09:34:04 2012 [ 33.837] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 33.936] (==) No Layout section. Using the first Screen section. [ 33.936] (==) No screen section available. Using defaults. [ 33.936] (**) |-->Screen "Default Screen Section" (0) [ 33.936] (**) | |-->Monitor "<default monitor>" [ 33.936] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 33.936] (==) Automatically adding devices [ 33.936] (==) Automatically enabling devices [ 34.164] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 34.164] Entry deleted from font path. [ 34.226] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 34.226] (==) ModulePath set to "/usr/lib/xorg/modules" [ 34.226] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 34.226] (II) Loader magic: 0x7d3ae0 [ 34.226] (II) Module ABI versions: [ 34.226] X.Org ANSI C Emulation: 0.4 [ 34.226] X.Org Video Driver: 10.0 [ 34.226] X.Org XInput driver : 12.2 [ 34.226] X.Org Server Extension : 5.0 [ 34.227] (--) PCI:*(0:1:5:0) 1002:9712:103c:1661 rev 0, Mem @ 0xd0000000/268435456, 0xf1400000/65536, 0xf1300000/1048576, I/O @ 0x00008000/256 [ 34.227] (--) PCI: (0:2:0:0) 1002:6760:103c:1661 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072 [ 34.227] (II) Open ACPI successful (/var/run/acpid.socket) [ 34.227] (II) LoadModule: "extmod" [ 34.249] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 34.277] (II) Module extmod: vendor="X.Org Foundation" [ 34.277] compiled for 1.10.4, module version = 1.0.0 [ 34.277] Module class: X.Org Server Extension [ 34.277] ABI class: X.Org Server Extension, version 5.0 [ 34.277] (II) Loading extension SELinux [ 34.277] (II) Loading extension MIT-SCREEN-SAVER [ 34.277] (II) Loading extension XFree86-VidModeExtension [ 34.277] (II) Loading extension XFree86-DGA [ 34.277] (II) Loading extension DPMS [ 34.277] (II) Loading extension XVideo [ 34.277] (II) Loading extension XVideo-MotionCompensation [ 34.277] (II) Loading extension X-Resource [ 34.277] (II) LoadModule: "dbe" [ 34.277] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 34.299] (II) Module dbe: vendor="X.Org Foundation" [ 34.299] compiled for 1.10.4, module version = 1.0.0 [ 34.299] Module class: X.Org Server Extension [ 34.299] ABI class: X.Org Server Extension, version 5.0 [ 34.299] (II) Loading extension DOUBLE-BUFFER [ 34.299] (II) LoadModule: "glx" [ 34.299] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 34.477] (II) Module glx: vendor="X.Org Foundation" [ 34.477] compiled for 1.10.4, module version = 1.0.0 [ 34.477] ABI class: X.Org Server Extension, version 5.0 [ 34.477] (==) AIGLX enabled [ 34.477] (II) Loading extension GLX [ 34.477] (II) LoadModule: "record" [ 34.478] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 34.481] (II) Module record: vendor="X.Org Foundation" [ 34.481] compiled for 1.10.4, module version = 1.13.0 [ 34.481] Module class: X.Org Server Extension [ 34.481] ABI class: X.Org Server Extension, version 5.0 [ 34.481] (II) Loading extension RECORD [ 34.481] (II) LoadModule: "dri" [ 34.481] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 34.512] (II) Module dri: vendor="X.Org Foundation" [ 34.512] compiled for 1.10.4, module version = 1.0.0 [ 34.512] ABI class: X.Org Server Extension, version 5.0 [ 34.512] (II) Loading extension XFree86-DRI [ 34.512] (II) LoadModule: "dri2" [ 34.512] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 34.515] (II) Module dri2: vendor="X.Org Foundation" [ 34.515] compiled for 1.10.4, module version = 1.2.0 [ 34.515] ABI class: X.Org Server Extension, version 5.0 [ 34.515] (II) Loading extension DRI2 [ 34.515] (==) Matched ati as autoconfigured driver 0 [ 34.515] (==) Matched vesa as autoconfigured driver 1 [ 34.515] (==) Matched fbdev as autoconfigured driver 2 [ 34.515] (==) Assigned the driver to the xf86ConfigLayout [ 34.515] (II) LoadModule: "ati" [ 34.706] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 34.724] (II) Module ati: vendor="X.Org Foundation" [ 34.724] compiled for 1.10.3, module version = 6.14.2 [ 34.724] Module class: X.Org Video Driver [ 34.724] ABI class: X.Org Video Driver, version 10.0 [ 34.724] (II) LoadModule: "radeon" [ 34.725] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 34.923] (II) Module radeon: vendor="X.Org Foundation" [ 34.923] compiled for 1.10.3, module version = 6.14.2 [ 34.923] Module class: X.Org Video Driver [ 34.923] ABI class: X.Org Video Driver, version 10.0 [ 34.945] (II) LoadModule: "vesa" [ 34.945] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 34.988] (II) Module vesa: vendor="X.Org Foundation" [ 34.988] compiled for 1.10.3, module version = 2.3.0 [ 34.988] Module class: X.Org Video Driver [ 34.988] ABI class: X.Org Video Driver, version 10.0 [ 34.988] (II) LoadModule: "fbdev" [ 34.988] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 35.020] (II) Module fbdev: vendor="X.Org Foundation" [ 35.020] compiled for 1.10.3, module version = 0.4.2 [ 35.020] ABI class: X.Org Video Driver, version 10.0 [ 35.020] (II) RADEON: Driver for ATI Radeon chipsets: <snip> [ 35.023] (II) VESA: driver for VESA chipsets: vesa [ 35.023] (II) FBDEV: driver for framebuffer: fbdev [ 35.023] (++) using VT number 7 [ 35.033] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 35.033] (II) [KMS] Kernel modesetting enabled. [ 35.033] (WW) Falling back to old probe method for vesa [ 35.034] (WW) Falling back to old probe method for fbdev [ 35.034] (II) Loading sub module "fbdevhw" [ 35.034] (II) LoadModule: "fbdevhw" [ 35.034] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 35.185] (II) Module fbdevhw: vendor="X.Org Foundation" [ 35.185] compiled for 1.10.4, module version = 0.0.2 [ 35.185] ABI class: X.Org Video Driver, version 10.0 [ 35.288] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 35.288] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 35.288] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 35.288] (==) RADEON(0): Default visual is TrueColor [ 35.288] (==) RADEON(0): RGB weight 888 [ 35.288] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 35.288] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 4200" (ChipID = 0x9712) [ 35.288] (II) RADEON(0): PCI card detected [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: Searching for BusID pci:0000:01:05.0 [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: drmOpenMinor returns 9 [ 35.288] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 [ 35.288] (II) Loading sub module "exa" [ 35.288] (II) LoadModule: "exa" [ 35.288] (II) Loading /usr/lib/xorg/modules/libexa.so [ 35.335] (II) Module exa: vendor="X.Org Foundation" [ 35.335] compiled for 1.10.4, module version = 2.5.0 [ 35.335] ABI class: X.Org Video Driver, version 10.0 [ 35.335] (II) RADEON(0): KMS Color Tiling: disabled [ 35.335] (II) RADEON(0): KMS Pageflipping: enabled [ 35.335] (II) RADEON(0): SwapBuffers wait for vsync: enabled [ 35.360] (II) RADEON(0): Output VGA-0 has no monitor section [ 35.360] (II) RADEON(0): Output LVDS has no monitor section [ 35.364] (II) RADEON(0): Output HDMI-0 has no monitor section [ 35.388] (II) RADEON(0): EDID for output VGA-0 [ 35.388] (II) RADEON(0): EDID for output LVDS [ 35.388] (II) RADEON(0): Manufacturer: LGD Model: 2ac Serial#: 0 [ 35.388] (II) RADEON(0): Year: 2010 Week: 0 [ 35.388] (II) RADEON(0): EDID Version: 1.3 [ 35.388] (II) RADEON(0): Digital Display Input [ 35.388] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 35.388] (II) RADEON(0): Gamma: 2.20 [ 35.388] (II) RADEON(0): No DPMS capabilities specified [ 35.388] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 35.388] (II) RADEON(0): First detailed timing is preferred mode [ 35.388] (II) RADEON(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606 [ 35.388] (II) RADEON(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329 [ 35.388] (II) RADEON(0): Manufacturer's mask: 0 [ 35.388] (II) RADEON(0): Supported detailed timing: [ 35.388] (II) RADEON(0): clock: 69.3 MHz Image Size: 344 x 194 mm [ 35.388] (II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0 [ 35.388] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0 [ 35.388] (II) RADEON(0): LG Display [ 35.388] (II) RADEON(0): LP156WH2-TLQB [ 35.388] (II) RADEON(0): EDID (in hex): [ 35.388] (II) RADEON(0): 00ffffffffffff0030e4ac0200000000 [ 35.388] (II) RADEON(0): 00140103802213780ac1259d5f5b9b27 [ 35.388] (II) RADEON(0): 19505400000001010101010101010101 [ 35.388] (II) RADEON(0): 010101010101121b567850000e302020 [ 35.388] (II) RADEON(0): 240058c2100000190000000000000000 [ 35.388] (II) RADEON(0): 00000000000000000000000000fe004c [ 35.388] (II) RADEON(0): 4720446973706c61790a2020000000fe [ 35.388] (II) RADEON(0): 004c503135365748322d544c514200c1 [ 35.388] (II) RADEON(0): Printing probed modes for output LVDS [ 35.388] (II) RADEON(0): Modeline "1366x768"x59.6 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 35.388] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz) [ 35.388] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz) [ 35.388] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 35.388] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 35.388] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz) [ 35.388] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz) [ 35.388] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) [ 35.392] (II) RADEON(0): EDID for output HDMI-0 [ 35.392] (II) RADEON(0): Output VGA-0 disconnected [ 35.392] (II) RADEON(0): Output LVDS connected [ 35.392] (II) RADEON(0): Output HDMI-0 disconnected [ 35.392] (II) RADEON(0): Using exact sizes for initial modes [ 35.392] (II) RADEON(0): Output LVDS using initial mode 1366x768 [ 35.392] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 35.392] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fba0000 [ 35.392] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM [ 35.392] (==) RADEON(0): DPI set to (96, 96) [ 35.392] (II) Loading sub module "fb" [ 35.392] (II) LoadModule: "fb" [ 35.392] (II) Loading /usr/lib/xorg/modules/libfb.so [ 35.492] (II) Module fb: vendor="X.Org Foundation" [ 35.492] compiled for 1.10.4, module version = 1.0.0 [ 35.492] ABI class: X.Org ANSI C Emulation, version 0.4 [ 35.492] (II) Loading sub module "ramdac" [ 35.492] (II) LoadModule: "ramdac" [ 35.492] (II) Module "ramdac" already built-in [ 35.492] (II) UnloadModule: "vesa" [ 35.492] (II) Unloading vesa [ 35.492] (II) UnloadModule: "fbdev" [ 35.492] (II) Unloading fbdev [ 35.492] (II) UnloadModule: "fbdevhw" [ 35.492] (II) Unloading fbdevhw [ 35.492] (--) Depth 24 pixmap format is 32 bpp [ 35.492] (II) RADEON(0): [DRI2] Setup complete [ 35.492] (II) RADEON(0): [DRI2] DRI driver: r600 [ 35.492] (II) RADEON(0): Front buffer size: 4224K [ 35.492] (II) RADEON(0): VRAM usage limit set to 228096K [ 35.615] (==) RADEON(0): Backing store disabled [ 35.615] (II) RADEON(0): Direct rendering enabled [ 35.658] (II) RADEON(0): Setting EXA maxPitchBytes [ 35.658] (II) EXA(0): Driver allocated offscreen pixmaps [ 35.658] (II) EXA(0): Driver registered support for the following operations: [ 35.658] (II) Solid [ 35.658] (II) Copy [ 35.658] (II) Composite (RENDER acceleration) [ 35.658] (II) UploadToScreen [ 35.658] (II) DownloadFromScreen [ 35.687] (II) RADEON(0): Acceleration enabled [ 35.687] (==) RADEON(0): DPMS enabled [ 35.687] (==) RADEON(0): Silken mouse enabled [ 35.721] (II) RADEON(0): Set up textured video [ 35.721] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 35.721] (--) RandR disabled [ 35.721] (II) Initializing built-in extension Generic Event Extension [ 35.721] (II) Initializing built-in extension SHAPE [ 35.721] (II) Initializing built-in extension MIT-SHM [ 35.721] (II) Initializing built-in extension XInputExtension [ 35.721] (II) Initializing built-in extension XTEST [ 35.721] (II) Initializing built-in extension BIG-REQUESTS [ 35.721] (II) Initializing built-in extension SYNC [ 35.721] (II) Initializing built-in extension XKEYBOARD [ 35.721] (II) Initializing built-in extension XC-MISC [ 35.721] (II) Initializing built-in extension SECURITY [ 35.721] (II) Initializing built-in extension XINERAMA [ 35.721] (II) Initializing built-in extension XFIXES [ 35.721] (II) Initializing built-in extension RENDER [ 35.721] (II) Initializing built-in extension RANDR [ 35.721] (II) Initializing built-in extension COMPOSITE [ 35.721] (II) Initializing built-in extension DAMAGE [ 35.721] (II) SELinux: Disabled on system [ 35.982] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 35.982] (II) AIGLX: enabled GLX_INTEL_swap_event [ 35.982] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 35.982] (II) AIGLX: enabled GLX_SGI_make_current_read [ 35.982] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 35.982] (II) AIGLX: Loaded and initialized /usr/lib/dri/r600_dri.so [ 35.982] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 35.999] (II) RADEON(0): Setting screen physical size to 361 x 203 [ 43.896] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.896] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.896] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.924] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.924] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.924] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.988] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.988] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.988] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 67.375] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 67.376] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 67.376] (II) LoadModule: "evdev" [ 67.376] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (II) Module evdev: vendor="X.Org Foundation" [ 67.392] compiled for 1.10.3, module version = 2.6.0 [ 67.392] Module class: X.Org XInput Driver [ 67.392] ABI class: X.Org XInput driver, version 12.2 [ 67.392] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 67.392] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (**) Logitech USB Optical Mouse: always reports core events [ 67.392] (**) Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 67.392] (--) Logitech USB Optical Mouse: Found 12 mouse buttons [ 67.392] (--) Logitech USB Optical Mouse: Found scroll wheel(s) [ 67.392] (--) Logitech USB Optical Mouse: Found relative axes [ 67.392] (--) Logitech USB Optical Mouse: Found x and y relative axes [ 67.392] (II) Logitech USB Optical Mouse: Configuring as mouse [ 67.392] (II) Logitech USB Optical Mouse: Adding scrollwheel support [ 67.392] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 67.392] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 67.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input14/event1" [ 67.392] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE) [ 67.392] (II) Logitech USB Optical Mouse: initialized for relative axes. [ 67.392] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 67.392] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 67.392] (II) No input driver/identifier specified (ignoring) [ 78.692] (II) Logitech USB Optical Mouse: Close [ 78.692] (II) UnloadModule: "evdev" [ 78.692] (II) Unloading evdev

  Read the article

• Nginx and client certificates from hierarchical OpenSSL-based certification authorities

  - by Fmy Oen

  I'm trying to set up root certification authority, subordinate certification authority and to generate the client certificates signed by any of this CA that nginx 0.7.67 on Debian Squeeze will accept. My problem is that root CA signed client certificate works fine while subordinate CA signed one results in "400 Bad Request. The SSL certificate error". Step 1: nginx virtual host configuration: server { server_name test.local; access_log /var/log/nginx/test.access.log; listen 443 default ssl; keepalive_timeout 70; ssl_protocols SSLv3 TLSv1; ssl_ciphers AES128-SHA:AES256-SHA:RC4-SHA:DES-CBC3-SHA:RC4-MD5; ssl_certificate /etc/nginx/ssl/server.crt; ssl_certificate_key /etc/nginx/ssl/server.key; ssl_client_certificate /etc/nginx/ssl/client.pem; ssl_verify_client on; ssl_session_cache shared:SSL:10m; ssl_session_timeout 5m; location / { proxy_pass http://testsite.local/; } } Step 2: PKI infrastructure organization for both root and subordinate CA (based on this article): # mkdir ~/pki && cd ~/pki # mkdir rootCA subCA # cp -v /etc/ssl/openssl.cnf rootCA/ # cd rootCA/ # mkdir certs private crl newcerts; touch serial; echo 01 > serial; touch index.txt; touch crlnumber; echo 01 > crlnumber # cp -Rvp * ../subCA/ Almost no changes was made to rootCA/openssl.cnf: [ CA_default ] dir = . # Where everything is kept ... certificate = $dir/certs/rootca.crt # The CA certificate ... private_key = $dir/private/rootca.key # The private key and to subCA/openssl.cnf: [ CA_default ] dir = . # Where everything is kept ... certificate = $dir/certs/subca.crt # The CA certificate ... private_key = $dir/private/subca.key # The private key Step 3: Self-signed root CA certificate generation: # openssl genrsa -out ./private/rootca.key -des3 2048 # openssl req -x509 -new -key ./private/rootca.key -out certs/rootca.crt -config openssl.cnf Enter pass phrase for ./private/rootca.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:rootca Email Address []: Step 4: Subordinate CA certificate generation: # cd ../subCA # openssl genrsa -out ./private/subca.key -des3 2048 # openssl req -new -key ./private/subca.key -out subca.csr -config openssl.cnf Enter pass phrase for ./private/subca.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:subca Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: Step 5: Subordinate CA certificate signing by root CA certificate: # cd ../rootCA/ # openssl ca -in ../subCA/subca.csr -extensions v3_ca -config openssl.cnf Using configuration from openssl.cnf Enter pass phrase for ./private/rootca.key: Check that the request matches the signature Signature ok Certificate Details: Serial Number: 1 (0x1) Validity Not Before: Feb 4 10:49:43 2013 GMT Not After : Feb 4 10:49:43 2014 GMT Subject: countryName = AU stateOrProvinceName = Some-State organizationName = Internet Widgits Pty Ltd commonName = subca X509v3 extensions: X509v3 Subject Key Identifier: C9:E2:AC:31:53:81:86:3F:CD:F8:3D:47:10:FC:E5:8E:C2:DA:A9:20 X509v3 Authority Key Identifier: keyid:E9:50:E6:BF:57:03:EA:6E:8F:21:23:86:BB:44:3D:9F:8F:4A:8B:F2 DirName:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca serial:9F:FB:56:66:8D:D3:8F:11 X509v3 Basic Constraints: CA:TRUE Certificate is to be certified until Feb 4 10:49:43 2014 GMT (365 days) Sign the certificate? [y/n]:y 1 out of 1 certificate requests certified, commit? [y/n]y ... # cd ../subCA/ # cp -v ../rootCA/newcerts/01.pem certs/subca.crt Step 6: Server certificate generation and signing by root CA (for nginx virtual host): # cd ../rootCA # openssl genrsa -out ./private/server.key -des3 2048 # openssl req -new -key ./private/server.key -out server.csr -config openssl.cnf Enter pass phrase for ./private/server.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:test.local Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in server.csr -out certs/server.crt -config openssl.cnf Step 7: Client #1 certificate generation and signing by root CA: # openssl genrsa -out ./private/client1.key -des3 2048 # openssl req -new -key ./private/client1.key -out client1.csr -config openssl.cnf Enter pass phrase for ./private/client1.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:Client #1 Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in client1.csr -out certs/client1.crt -config openssl.cnf Step 8: Client #1 certificate converting to PKCS12 format: # openssl pkcs12 -export -out certs/client1.p12 -inkey private/client1.key -in certs/client1.crt -certfile certs/rootca.crt Step 9: Client #2 certificate generation and signing by subordinate CA: # cd ../subCA/ # openssl genrsa -out ./private/client2.key -des3 2048 # openssl req -new -key ./private/client2.key -out client2.csr -config openssl.cnf Enter pass phrase for ./private/client2.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: State or Province Name (full name) [Some-State]: Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]: Organizational Unit Name (eg, section) []: Common Name (eg, YOUR name) []:Client #2 Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: # openssl ca -in client2.csr -out certs/client2.crt -config openssl.cnf Step 10: Client #2 certificate converting to PKCS12 format: # openssl pkcs12 -export -out certs/client2.p12 -inkey private/client2.key -in certs/client2.crt -certfile certs/subca.crt Step 11: Passing server certificate and private key to nginx (performed with OS superuser privileges): # cd ../rootCA/ # cp -v certs/server.crt /etc/nginx/ssl/ # cp -v private/server.key /etc/nginx/ssl/ Step 12: Passing root and subordinate CA certificates to nginx (performed with OS superuser privileges): # cat certs/rootca.crt > /etc/nginx/ssl/client.pem # cat ../subCA/certs/subca.crt >> /etc/nginx/ssl/client.pem client.pem file look like this: # cat /etc/nginx/ssl/client.pem -----BEGIN CERTIFICATE----- MIID6TCCAtGgAwIBAgIJAJ/7VmaN048RMA0GCSqGSIb3DQEBBQUAMFYxCzAJBgNV BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX aWRnaXRzIFB0eSBMdGQxDzANBgNVBAMTBnJvb3RjYTAeFw0xMzAyMDQxMDM1NTda ... -----END CERTIFICATE----- Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) ... -----BEGIN CERTIFICATE----- MIID4DCCAsigAwIBAgIBATANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJBVTET MBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJuZXQgV2lkZ2l0cyBQ dHkgTHRkMQ8wDQYDVQQDEwZyb290Y2EwHhcNMTMwMjA0MTA0OTQzWhcNMTQwMjA0 ... -----END CERTIFICATE----- It looks like everything is working fine: # service nginx reload # Reloading nginx configuration: Enter PEM pass phrase: # nginx. # Step 13: Installing *.p12 certificates in browser (Firefox in my case) gives the problem I've mentioned above. Client #1 = 200 OK, Client #2 = 400 Bad request/The SSL certificate error. Any ideas what should I do? Update 1: Results of SSL connection test attempts: # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/rootca.crt -cert ~/pki/rootCA/certs/client1.crt -key ~/pki/rootCA/private/client1.key -showcerts Enter pass phrase for tmp/testcert/client1.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 --- Certificate chain 0 s:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=test.local i:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca -----BEGIN CERTIFICATE----- MIIDpjCCAo6gAwIBAgIBAjANBgkqhkiG9w0BAQUFADBWMQswCQYDVQQGEwJBVTET MBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJuZXQgV2lkZ2l0cyBQ dHkgTHRkMQ8wDQYDVQQDEwZyb290Y2EwHhcNMTMwMjA0MTEwNjAzWhcNMTQwMjA0 ... -----END CERTIFICATE----- 1 s:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca i:/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca -----BEGIN CERTIFICATE----- MIID6TCCAtGgAwIBAgIJAJ/7VmaN048RMA0GCSqGSIb3DQEBBQUAMFYxCzAJBgNV BAYTAkFVMRMwEQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBX aWRnaXRzIFB0eSBMdGQxDzANBgNVBAMTBnJvb3RjYTAeFw0xMzAyMDQxMDM1NTda ... -----END CERTIFICATE----- --- Server certificate subject=/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=test.local issuer=/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca --- Acceptable client certificate CA names /C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca /C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca --- SSL handshake has read 3395 bytes and written 2779 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: zlib compression Expansion: zlib compression SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 15BFC2029691262542FAE95A48078305E76EEE7D586400F8C4F7C516B0F9D967 Session-ID-ctx: Master-Key: 23246CF166E8F3900793F0A2561879E5DB07291F32E99591BA1CF53E6229491FEAE6858BFC9AACAF271D9C3706F139C7 Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None TLS session ticket: 0000 - c2 5e 1d d2 b5 6d 40 23-b2 40 89 e4 35 75 70 07 .^...m@#[email protected]. 0010 - 1b bb 2b e6 e0 b5 ab 10-10 bf 46 6e aa 67 7f 58 ..+.......Fn.g.X 0020 - cf 0e 65 a4 67 5a 15 ba-aa 93 4e dd 3d 6e 73 4c ..e.gZ....N.=nsL 0030 - c5 56 f6 06 24 0f 48 e6-38 36 de f1 b5 31 c5 86 .V..$.H.86...1.. ... 0440 - 4c 53 39 e3 92 84 d2 d0-e5 e2 f5 8a 6a a8 86 b1 LS9.........j... Compression: 1 (zlib compression) Start Time: 1359989684 Timeout : 300 (sec) Verify return code: 0 (ok) --- Everything seems fine with Client #2 and root CA certificate but request returns 400 Bad Request error: # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/rootca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 ... Compression: 1 (zlib compression) Start Time: 1359989989 Timeout : 300 (sec) Verify return code: 0 (ok) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request Server: nginx/0.7.67 Date: Mon, 04 Feb 2013 15:00:43 GMT Content-Type: text/html Content-Length: 231 Connection: close <html> <head><title>400 The SSL certificate error</title></head> <body bgcolor="white"> <center><h1>400 Bad Request</h1></center> <center>The SSL certificate error</center> <hr><center>nginx/0.7.67</center> </body> </html> closed Verification fails with Client #2 certificate and subordinate CA certificate: # openssl s_client -connect test.local:443 -CAfile ~/pki/subCA/certs/subca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify error:num=19:self signed certificate in certificate chain verify return:0 ... Compression: 1 (zlib compression) Start Time: 1359990354 Timeout : 300 (sec) Verify return code: 19 (self signed certificate in certificate chain) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request ... Still getting 400 Bad Request error with concatenated CA certificates and Client #2 (but still everything ok with Client #1): # cat certs/rootca.crt ../subCA/certs/subca.crt > certs/concatenatedca.crt # openssl s_client -connect test.local:443 -CAfile ~/pki/rootCA/certs/concatenatedca.crt -cert ~/pki/subCA/certs/client2.crt -key ~/pki/subCA/private/client2.key -showcerts Enter pass phrase for tmp/testcert/client2.key: CONNECTED(00000003) depth=1 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = rootca verify return:1 depth=0 C = AU, ST = Some-State, O = Internet Widgits Pty Ltd, CN = test.local verify return:1 --- ... Compression: 1 (zlib compression) Start Time: 1359990772 Timeout : 300 (sec) Verify return code: 0 (ok) --- GET / HTTP/1.0 HTTP/1.1 400 Bad Request ... Update 2: I've managed to recompile nginx with enabled debug. Here is the part of successfull conection by Client #1 track: 2013/02/05 14:08:23 [debug] 38701#0: *119 accept: <MY IP ADDRESS> fd:3 2013/02/05 14:08:23 [debug] 38701#0: *119 event timer add: 3: 60000:2856497512 2013/02/05 14:08:23 [debug] 38701#0: *119 kevent set event: 3: ft:-1 fl:0025 2013/02/05 14:08:23 [debug] 38701#0: *119 malloc: 28805200:660 2013/02/05 14:08:23 [debug] 38701#0: *119 malloc: 28834400:1024 2013/02/05 14:08:23 [debug] 38701#0: *119 posix_memalign: 28860000:4096 @16 2013/02/05 14:08:23 [debug] 38701#0: *119 http check ssl handshake 2013/02/05 14:08:23 [debug] 38701#0: *119 https ssl handshake: 0x16 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL server name: "test.local" 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_do_handshake: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL handshake handler: 0 2013/02/05 14:08:23 [debug] 38701#0: *119 verify:1, error:0, depth:1, subject:"/C=AU /ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 14:08:23 [debug] 38701#0: *119 verify:1, error:0, depth:0, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=Client #1",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_do_handshake: 1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL: TLSv1, cipher: "AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1" 2013/02/05 14:08:23 [debug] 38701#0: *119 http process request line 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 http process request line 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: 1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: 524 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_read: -1 2013/02/05 14:08:23 [debug] 38701#0: *119 SSL_get_error: 2 2013/02/05 14:08:23 [debug] 38701#0: *119 http request line: "GET / HTTP/1.1" And here is the part of unsuccessfull conection by Client #2 track: 2013/02/05 13:51:34 [debug] 38701#0: *112 accept: <MY_IP_ADDRESS> fd:3 2013/02/05 13:51:34 [debug] 38701#0: *112 event timer add: 3: 60000:2855488975 2013/02/05 13:51:34 [debug] 38701#0: *112 kevent set event: 3: ft:-1 fl:0025 2013/02/05 13:51:34 [debug] 38701#0: *112 malloc: 28805200:660 2013/02/05 13:51:34 [debug] 38701#0: *112 malloc: 28834400:1024 2013/02/05 13:51:34 [debug] 38701#0: *112 posix_memalign: 28860000:4096 @16 2013/02/05 13:51:34 [debug] 38701#0: *112 http check ssl handshake 2013/02/05 13:51:34 [debug] 38701#0: *112 https ssl handshake: 0x16 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL server name: "test.local" 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL handshake handler: 0 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL handshake handler: 0 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:0, error:20, depth:1, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:0, error:27, depth:1, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=rootca" 2013/02/05 13:51:34 [debug] 38701#0: *112 verify:1, error:27, depth:0, subject:"/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=Client #2",issuer: "/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd/CN=subca" 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_do_handshake: 1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL: TLSv1, cipher: "AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1" 2013/02/05 13:51:34 [debug] 38701#0: *112 http process request line 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: 1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: 524 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_read: -1 2013/02/05 13:51:34 [debug] 38701#0: *112 SSL_get_error: 2 2013/02/05 13:51:34 [debug] 38701#0: *112 http request line: "GET / HTTP/1.1" So I'm getting OpenSSL error #20 and then #27. According to verify documentation: 20 X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: unable to get local issuer certificate the issuer certificate could not be found: this occurs if the issuer certificate of an untrusted certificate cannot be found. 27 X509_V_ERR_CERT_UNTRUSTED: certificate not trusted the root CA is not marked as trusted for the specified purpose.

  Read the article

• PC hangs and reboots from time to time

  - by Bevor

  Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

  Read the article

• You Might Be a DBA

  - by BuckWoody

  With all apologies to Jeff Foxworthy, I was up late Friday night on a holiday weekend (which translated into T-SQL becomes “Maintenance Window”) and I got bored in between the two or three minutes I had between clicks. So I started a “Twitter” meme – and it just took off. I haven’t cleaned these up much, but here, in author order as of Saturday the 29th of May is the list “You might be a DBA” from around the Twitterverse: buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA  buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA  buckwoody You have at least one set of scripts you won't share #youmightbeaDBA  buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA  buckwoody You have children older than the rest of your team #youmightbeaDBA  buckwoody You and the Oracle DBA would kill each other, but you'll happily fight off a developer together first #youmightbeaDBA  buckwoody You've threatened to quit if they give anyone the sa password on production #youmightbeaDBA  buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA  buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA  buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA  buckwoody You have at least one set of scripts you won't share #youmightbeaDBA  buckwoody You refer to co-workers as "carbon-units" #youmightbeaDBA  buckwoody Being paranoid is on your resume at the top #youmightbeaDBA  buckwoody Everyone comes to your cube to find the MSDN DVD's #youmightbeaDBA  buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA  buckwoody You've worn down developers to get your way by explaining normalization levels #youmightbeaDBA  buckwoody You refer to clothes as "Data Abstractions" #youmightbeaDBA  buckwoody Users pester you to be able to put data in a database, then they pester you to take it out and put it in Excel #youmightbeaDBA  buckwoody Others try to de-duplicate data, you try to copy it to more than three locations #youmightbeaDBA  buckwoody You have at least one DLT tape in the trunk of your car #youmightbeaDBA  buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA  buckwoody Your spouse knows what "ETL" means #youmightbeaDBA  buckwoody You've referred to yourself as the "Data Janitor" #youmightbeaDBA  buckwoody You don't have positive connotations of the word "upgrade" #youmightbeaDBA  buckwoody You get your coffee before you check your servers, because you know you won't get any if you don't #youmightbeaDBA  buckwoody You always come to work through the back door so no one hijacks you on the way to your cube #youmightbeaDBA  buckwoody You check your server logs before you check your e-mail in the morning so you can reply "Yeah, I already fixed that." #youmightbeaDBA  buckwoody You have more conference badges than clean socks #youmightbeaDBA  buckwoody Your coffee mug says "It depends" #youmightbeaDBA  buckwoody You can convince a boss that you need 16GB of RAM in your laptop #youmightbeaDBA  buckwoody You've used ebay to find production equipment #youmightbeaDBA  buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA  buckwoody You know when your company is acquiring another even before the CFO #youmightbeaDBA  buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA  buckwoody You call aspirin "work vitamins" #youmightbeaDBA  buckwoody You get the same amount of sleep even after you have a child #youmightbeaDBA  buckwoody You obsess about performance metrics from over one year ago #youmightbeaDBA  buckwoody The first thing you buy after the database software is aftermarket tools to manage the database software #youmightbeaDBA  buckwoody You've tried to convince someone else to become a DBA #youmightbeaDBA  buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA  buckwoody You only know other DBA's by their Tweet Handle #youmightbeaDBA  buckwoody You've explained the difference between 32 and 64-bit to more than one manager in terms they can understand, using puppets #youmightbeaDBA  buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA  buckwoody You've driven to the Datacenter to install SQL Server because "you don't trust those NOC admins" #youmightbeaDBA  buckwoody You pay more for faster Internet connections than cable at home so you don't have to drive in #youmightbeaDBA  buckwoody You call texting a "queuing system" #youmightbeaDBA  buckwoody You know that if someone can read Perl, they manage an Oracle system #youmightbeaDBA  buckwoody You have an e-mail rule for backup notifications #youmightbeaDBA  buckwoody Your food pyramid includes coffee, salt and fat #youmightbeaDBA  buckwoody You wish everything had a graphical query plan #youmightbeaDBA  buckwoody You refactor your e-mails #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA  buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody You've written blog posts on technology you've never actually implemented in production #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody @MidnightDBA Click the #youmightbeaDBA tag. I've had WAY too much coffee today.  buckwoody There is no other position that is 1-deep except you and the CEO #youmightbeaDBA  buckwoody When you watch "The Office" you call it "OJT" #youmightbeaDBA  buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA  buckwoody Your blog would make a "best practices" or "worst practices" book #youmightbeaDBA  buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA  buckwoody The first thing you install on your netbook is SSMS #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody Your watch is set to UTC because it's just easier #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA  buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA  buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody * == bad #youmightbeaDBA  buckwoody * == bad #youmightbeaDBA  buckwoody There are just as many females in your technical field as males #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA  buckwoody You refer to time as a "Clustered Index" #youmightbeaDBA  buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA  buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA  buckwoody You think a millisecond is a really long time #youmightbeaDBA  buckwoody You're sitting and typing #youmightbeaDBA when you could be outside #youmightbeaDBA  buckwoody You can't wait for a technical conference so you can wear a kilt - and you're not Scottish #youmightbeaDBA  buckwoody You know that "DBA" stands for "Default Blame Acceptor" #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You know what "the truth, thole truth and nothing but the truth, so help me Codd" means #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You can't talk fast enough to get a concept out of your head so you tweet it instead #youmightbeaDBA  buckwoody You cry when someone doesn't use a WHERE clause #youmightbeaDBA  buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA  buckwoody You think "Set theory" is not an verb but a noun #youmightbeaDBA  buckwoody You try to convince random strangers to vote on your Connect item #youmightbeaDBA  buckwoody You think 3 hours of contiguous sleep is a good thing #youmightbeaDBA or #youmightbeamother  buckwoody You don't like Oracle, and not just because of what she did to Neo #youmightbeaDBA  buckwoody You know when to say "sequel" and "s-q-l" #youmightbeaDBA  buckwoody You know where the data is #youmightbeaDBA  buckwoody You refer to your children as "Fully Redundant Mirrors" #youmightbeaDBA  buckwoody Holiday == "Maintenance Window" #youmightbeaDBA  buckwoody Your laptop is more powerful than the servers in most companies - including your own #youmightbeaDBA  buckwoody You capitalize SELECTed words #youmightbeaDBA  buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA  buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA  buckwoody You cringe in public when the word "upgrade" is used in a sentence #youmightbeaDBA  buckwoody Holiday == "Maintenance Window" #youmightbeaDBA  buckwoody All Data Is MetaData means something to you #youmightbeaDBA  buckwoody You've never seen the driveway to your house in the daylight #youmightbeaDBA  buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA  buckwoody Most of your bloodstream is composed of caffeine #youmightbeaDBA  buckwoody Your task list is labeled "CRUD Matrix" #youmightbeaDBA  buckwoody You call your wife/husband a "Linked Server" #youmightbeaDBA  anonythemouse When someone tells you they are going to take a dump and you wonder of which database then #youmightbeaDBA  anonythemouse When it's 11pm on a holiday weekend and you are working #youmightbeaDBA  anonythemouse When you sit down at a table and look for it's primary key #youmightbeaDBA  anonythemouse When getting milk from the fridge you check the expiry date is > getdate() #youmightbeaDBA  blakmk when you wake up dreaming about sql #youmightbeaDBA  CharlesGarver You think a @buckwoody bobblehead would be a cool thing to have on the dashboard of your car #youmightbeaDBA  CharlesGarver Your friends don't understand why you think there's a difference between single and double quotes #youmightbeaDBA  CharlesGarver Even the newest employees know your name from all the downtime notices you've sent out #youmightbeaDBA  CharlesGarver You sometimes feel anxious and think "I should test restoring those backups" and then the feeling passes #youmightbeadba  CharlesGarver You know what a co-worker means when they ask "how is your squirrel server?" #youmightbeadba  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver You're willing to move someone's job up in priority for a box of #voodoodonuts #youmightbeaDBA  CharlesGarver Each person in your company seems to think you work for THEM #youmightbeaDBA  CharlesGarver You have a Love/Hate relationship going on with #Microsoft #youmightbeaDBA  CharlesGarver People ask you to troubleshoot their Access program #youmightbeaDBA  CharlesGarver The first words you hear in the morning are 'your voicemail box is full' #youmightbeaDBA  CharlesGarver The thought of disrupting 500 people's work so you can do something doesn't phase you #youmightbeaDBA  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver Your home computer is backed up in 3 different places #youmightbeaDBA  CharlesGarver Your wardrobe for work includes pajamas #youmightbeaDBA  CharlesGarver Someone tells you to look in the INDEX and you look puzzled before finally going to the back of the book. #youmightbeaDBA  chuckboycejr If you have ever set up a SQLAgent job to email your mobile phone to serve as an alarm clock #youmightbeaDBA  chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA  chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA  chuckboycejr If you'd wrestle a SysAdmin to the ground to implement #DPA best practices as per @aspiringgeek #youmightbeaDBA  databaseguy I need to be up in 7 hours, so I'm off to bed! I'll have to read the rest of @buckwoody's #youmightbeaDBA posts in the AM. (g'night Buck!)  databaseguy When people ask you about your house, the first thing you describe is the network. #youmightbeaDBA  databaseguy The last thing you say at the office each day is, "is anybody else here? I'm shutting off the lights!" #youmightbeaDBA  databaseguy Your blood pressure rises when you read application specs drafted by marketing. #youmightbeaDBA  databaseguy A good day at work is one when nobody pays you no mind. #youmightbeaDBA  databaseguy You care about latches and wait states. #youmightbeaDBA  databaseguy You have worked over 200 hours on a performance tuning project that required no application changes at all. #youmightbeaDBA  databaseguy The late-night security guard knows the names of your spouse and kids. #youmightbeaDBA  databaseguy You have had vigorous debates about whether it should be pronounced "sequel" or "ess-queue-ell". #youmightbeaDBA  databaseguy You have VPN and RDP software installed on your phone ... just in case. #youmightbeaDBA  databaseguy You have edited a data file by hand, just to see what would happen. #youmightbeaDBA  databaseguy You decorate your office walls with database catalog posters. #youmightbeaDBA  databaseguy You've built programs that access data just to keep other developers from asking you to run queries all the time. #youmightbeaDBA  databaseguy When you watch movies like The Matrix, you find yourself calculating the fasibility of storing all that data. #youmightbeaDBA  databaseguy You have tried to convince someone to spend money on an SSD storage array. #youmightbeaDBA  databaseguy When CPU is spiked on a server, you want to gather forensic evidence. #youmightbeaDBA  databaseguy You have to remind developers not to push code to production without checking if the database is ready. #youmightbeaDBA  databaseguy Nobody cares what you wear to work, as long as the thing keeps running. #youmightbeaDBA  databaseguy Telepathy is a job requirement when working with app dev teams. #youmightbeaDBA  databaseguy You read database statistics for the educational value. #youmightbeaDBA  databaseguy And your boss freely admits this to anyone within earshot. #youmightbeaDBA  databaseguy Your boss cannot explain or understand what you do. #youmightbeaDBA  databaseguy You envision ERDs when you see a GUI. #youmightbeaDBA  databaseguy You say things like "applications come and go, but data lasts forever." #youmightbeaDBA  databaseguy You have memorized the names of several of the AdventureWorks employees. #youmightbeaDBA  databaseguy You know what MAXDOP setting you can get away with for a big query based on current server load. #youmightbeaDBA  databaseguy And you immediately recognize the recursion in my last tweet. #youmightbeaDBA  databaseguy You find 50 simultaneous tweets from @buckwoody about #youmightbeaDBA :O)  DBAishness You have "funny stories" about the times your developers accidentally deleted the T-log in their test environment. #youmightbeaDBA  DBAishness Planning to slice and dice your MDW data with PowerPivot makes you giggle like a schoolgirl. #youmightbeaDBA  donalddotfarmer You think @buckwoody lives in the "real world." #youmightbeaDBA  jamach09 @buckwoody #youmightbeaDBA Why go outside when you can sit in the nice cool server room?  jamach09 If you refer to procreation as "Replication", #youmightbeaDBA.  jamach09 If you think ORM is a four-letter word, #youmightbeaDBA  JamesMarsh If you have ever preached the value of Source Code Control, #YouMightBeADBA  jethrocarr @venzann You store your shopping list in a ACID compliant DB #youmightbeaDBA  joe_positive @buckwoody thought it stood for "Don't Bother Asking" #youmightbeaDBA  joe_positive when you check your IT Events Calendar before making weekend plans #youmightbeaDBA  LadyRuna You cringe whenever someone calls Excel a database #youmightbeaDBA  LadyRuna When the waiter says he'll be your server today, you ask how many terabytes he is #youmightbeaDBA  LadyRuna you always call the asterisk a "Star" #youmightbeaDBA  LadyRuna You walk into a server room, say "Nice RACK!" and everyone there knows you're talking about server rack... #youmightbeaDBA  LadyRuna You receive more messages from servers than from friends #youmightbeaDBA  LadyRuna hmmm... #youmightbeaDBA if your recipe for gumbo is "SELECT * FROM Refrigerator"  markjholmes @SQLSoldier Heh. #youmightbeaDBA if you correct other DBAs' spelling of @PaulRandal  markjholmes #youmightbeaDBA if you actually test RAID5 vs RAID10 on your SAN because when it comes to configuration, "it depends."  markjholmes #youmightbeaDBA if you have at least 3 definitions of the word "cluster"  MarlonRibunal 3 Words: @BrentO, snicker, & Access #youmightbeaDBA  MarlonRibunal @onpnt @mikeSQL my appeal was a couple of mins late. Enjoying #youmightbeaDBA  MarlonRibunal @mikeSQL @onpnt pls, don't mention bacon #youmightbeaDBA  merv @buckwoody You HATE 3-way joins #youmightbeaDBA  MidnightDBA If you're up at midnight Tweeting about SQL #youmightbeaDBA  MidnightDBA @buckwoody I'd noticed that. :) #youmightbeaDBA  mikeSQL when people talk about "their type" you're thinking varchar, bigint, binary, etc #youmightbeadba  mikeSQL people ask you to go to lunch , but you can't go because you're attending #SQLlunch #youmightbeadba  mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba  mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba  mrdenny If you think that @buckwoody's demo using PowerPivot to analyze index usage data from DMVs is awesome then #youmightbeaDBA  mrdenny You wish @PaulRandal still worked at Microsoft so that they would make a bobble head of him #youmightbeadba  mrdenny When it's 11pm on a holiday weekend, and your posting stupid jokes on Twitter then #youmightbeadba  mrdenny If you go out with friends and wonder why no one's wearing a kilt then #YouMightBeADBA  mrdenny You can't do basic math, but you know off the top of your head how many CALs $14,412 can buy you. #YoumightbeaDBA  mrdenny If you've ever setup a SQL Job to email you to get you out of a regularly scheduled meeting #YouMightBeADBA.  mrdenny You throw up in your mouth a little when ever you here the word "Access". Even if it doesn't relate to a MS product. #YouMightBeADBA  msdtjones You spend more time listening to @buckwoody than your wife #youmightbeaDBA  NFDotCom You perform "hail deltas" on a regular basis. #YouMightBeADBA  NoelMcKinney If you tell your wife you want to go to Columbus Ohio for your wedding anniversary so you can attend #sqlsat42 then #youmightbeaDBA  NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA  NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA  NoelMcKinney Someone asks you to throw another log on the fire and you tell them not to worry about it because Autogrowth is turned on #youmightbeaDBA  Nuurdygirl Even if you have a girlfriend...its possible #youmightbeadba. Yeah-i said its possible!  Nuurdygirl When your girlfriend has to lean around the laptop to kiss you goodnight #youmightbeadba  Old_Man_Fish If you worry about how big your package is and how long it takes to finish #youmightbeaDBA  Old_Man_Fish If you no longer wonder if someone is in trouble or died if you are getting calls at 2AM #youmightbeaDBA  Old_Man_Fish If, when you hear the word ACCESS with no connotation you blood pressure jumps 50 points, #youmightbeaDBA  onpnt When you hear the word inject you immediately get concerned if your databases are OK #youmightbeaDBA  onpnt Your servers haven't been rebooted in a year #youmightbeaDBA  onpnt You know why it's funny when @PaulRandal has the word, "Sheep" in a tweet #youmightbeaDBA  onpnt You have read BOL without actually having a problem to figure out #youmightbeaDBA  onpnt You can type "SELECT columns FROM tables" without typos but tipen ni Banglish ares a messis #youmightbeaDBA  onpnt DR strategies doesn't include the word, RAID in them #youmightbeaDBA  onpnt you can move a SQL Server instance to a new server without the users ever knowing #youmightbeaDBA  onpnt You have made an SSIS package that is more than one step #youmightbeaDBA  onpnt You have the balls to say no to your boss when they ask for the sa password #youmightbeaDBA  onpnt you google to trouble shoot a problem and end up at your own blog (and it fixes it) #youmightbeaDBA  onpnt You talk your wife into moving the family vacation a week earlier so you can attend the areas local SSUG meeting #youmightbeaDBA  onpnt you can explain to a nontechnical person what a deadlock is #youmightbeaDBA  onpnt You hope a girl asks you what your collation is #youmightbeaDBA  onpnt you make jokes that include the words shrink, truncate and 1205. And you are the only one that laughs at them #youmightbeaDBA  onpnt You rate your ability to stay awake to work longer on blogs, twitter, forums and your day to day job with the 5 9's goal #youmightbeaDBA  onpnt you have major surgery and beg the doctor to release you back to work 5 days later because you miss your servers #youmightbeaDBA #TrueStory  onpnt You do have backups and you know how to use them #youmightbeaDBA  onpnt It's the network #youmightbeaDBA  onpnt When the developers get to work your mood changes rapidly #youmightbeaDBA  onpnt When someone says, "PASS", you first think of karaoke #youmightbeaDBA  onpnt Recruiters try to get you to call them *just* because they think you'll give them @BrentO contact info #youmightbeaDBA  onpnt You chuckle every time you go to grab the "CLR" Calcium, Lime and Rust Remover to clean something #youmightbeaDBA  onpnt @MarlonRibunal @mikeSQL Sorry man, it was already in motion ;-) #youmightbeaDBA  onpnt When you have an "I love bacon" sticker on your laptop. #youmightbeaDBA http://twitpic.com/1ry671  onpnt You sing SELECT statements in the shower #youmightbeaDBA  onpnt When you see a chicken it doesn't remind you of food. It reminds you of a guy named Jorge #youmightbeaDBA  onpnt At time, SQL is your mistress #youmightbeaDBA  onpnt Your wife wonders if SQL is the code name of your mistress at times #youmightbeaDBA  onpnt it's Friday and you are on twitter thinking really hard about what would be funny for hash tag #youmightbeaDBA  onpnt You organize your wife's "decorative"pillows on the bed in a B-Tree structure #youmightbeaDBA  PaulWhiteNZ If you: SELECT TOP (1) milk FROM fridge WHERE use_by_date >= GET_DATE() ORDER BY use_by_date ASC #YouMightBeaDBA  RonDBA #youmightbeaDBA if you read @buckwoody's and @BrentO's blogs.  ryaneastabrook @buckwoody omg, you have to stand up a website with these on them, they are awesome #youmightbeaDBA  soulvy @StrateSQL @LadyRuna Or a "Splat" #youmightbeaDBA  speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA  speedracer You retweet @buckwoody on a Friday night #youmightbeaDBA  speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA  speedracer Developers make you twitch #youmightbeaDBA  sqlagentman You know what X/1024*8 is. #YouMightBeADBA  SqlAsylum Your still in the office at 5:00 on memorial day weekend. #youmightbeadba :)  SQLBob Whenever someone you know gets pregnant you bring up INNER JOINs or SQL Injection attacks... #youmightbeaDBA  SQLChicken You know one or more SQL folks in the community with an animal in their username #youmightbeaDBA  SQLChicken You've used one or more car analogies to explain how a database works #youmightbeaDBA  SQLChicken “@sqljoe: #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you” lmao nice!  SQLChicken When talking about SSIS your discussions break down into various jokes about packages #youmightbeaDBA  SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA  SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA  SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  SQLCraftsman You really own a "Stick of Much Developer Whacking" #YouMightBeADBA  SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA  SQLCraftsman Default Blame Acceptor #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  SQLCraftsman Default Blame Acceptor #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  sqljoe #youmightbeaDBA if you wished your wife knew T-sql. USE ShoppingList SELECT NecessaryItems from Supermarket WHERE Category<> ("junk food")  sqljoe #youmightbeaDBA if the first thing you kiss when you wake up is your mobile for not waking you up in the middle of the night  sqljoe #youmightbeaDBA if your wife has a "Do Not Fly" family vacation list of her own including your laptop and mobile  sqljoe #youmightbeaDBA if you have researched for DBA Anonymous groups and attended a #SSUG willing to drop your database (vice)  sqljoe #youmightbeaDBA if your only maintenance windows are staff meetings  sqljoe #youmightbeaDBA if you think of yourself as "The One" in The Matrix "balancing the equation" from The Architect's (developers) poor coding  sqljoe #youmightbeaDBA if you think @PaulRandal should have played the Oracle in The Matrix  sqljoe #youmightbeaDBA if home CD & Movie collection is stored in secured containers,in logical order & naming convention,and with a backup copy  sqljoe #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you  sqljoe #youmightbeaDBA if you have tried to TiVo @MidnightDBA broadcasts  sqljoe #youmightbeaDBA if your #sql user group feels like #AA meetings  sqljoe #youmightbeaDBA if you thought of bringing your #sql books to #sqlsaturday and #sqlpass for autographs  sqljoe #youmightbeaDBA if #sqlpass feels like the #oscars  sqljoe #youmightbeaDBA if you are proud of your small package  SQLLawman #youmightbeaDBA when you hear MDX and Acura is not first thought that comes to mind.  sqlrunner If your wife double checks that there isn't a SQLSat within 200 miles of your vacation destination #youmightbeaDBA  sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA  sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA  sqlrunner You treat the word 'access' as a verb, not a noun #youmightbeaDBA  sqlrunner If you are happy with sub-second performance #youmightbeaDBA  sqlrunner When you know the names of the NOC people AND their families #youmightbeadba  sqlrunner When you know the names of the NOC people AND their families #youmightbeadba  sqlrunner Your company set's up international phone coverage for your cruise #youmightbeaDBA  sqlsamson @buckwoody if your manager asks you for data and you respond with "there's a script for that" #youmightbeadba  sqlsamson @buckwoody If you receive more messages from your server then your spouse #youmightbeadba  SQLSoldier You've spent all night Valentines Day upgrading the SQL Servers and forgot to tell your wife you'd be working late. #youmightbeadba  SQLSoldier You're flattered when someone calls you a geek. #youmightbeadba  SQLSoldier @llangit @mrdenny it's 11pm on a holiday weekend, & your reading stupid jokes on Twitter then #youmightbeadba  SQLSoldier Your manager borrows lunch money from you because your salary is 30% higher than his. #youmightbeaDBA  SQLSoldier You think "intellisense" is a double negative because it's not intelligent nor makes sense. #youmightbeaDBA  SQLSoldier 75% of the emails you receive at home have the phrase "now following you on Twitter!" in the subject line. #youmightbeaDBA  SQLSoldier You petition Ken Burns to remake Office Space because it should have been 18 hours long. #youmightbeaDBA  SQLSoldier You select a candidate for a Jr DBA position because his resume said he's willing to get your coffee. #youmightbeaDBA  SQLSoldier Somebody misquotes @PaulRandall and you call him on your cell to verify. #youmightbeaDBA  SQLSoldier You wish the elevator in your building was slower because it's the last time you'll be left alone all day. #youmightbeaDBA  SQLSoldier The developers sacrifice small animals before giving you their code for review. #youmightbeaDBA  SQLSoldier Developers bring you coffee and a BLT when you review their code. #youmightbeaDBA #IWish  SQLSoldier You can get out of any family get-together by saying you have to work and nobody questions it. #youmightbeaDBA  SQLSoldier You've requested a HP Superdome for you "test" box. #youmightbeaDBA  SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA  SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier A dev. asks if you've heard about some great new feature in SQL and you show the 16 blog posts you wrote on it ... last year #youmightbeaDBA  SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA #TrueStory  SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA  SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA  SQLSoldier You use a cell phone service coverage map to plan your next vacation. #youmightbeaDBA  SQLSoldier You come in to work at 7 AM because it gives you at least 3 hours without any developers around. #youmightbeaDBA  SQLSoldier You figure out a way to make take your wife on a cruise and deduct it as a business expense. #youmightbeaDBA #sqlcruise  SQLSoldier You name your cat SQLDog because the name @SQLCat was already taken. #youmightbeaDBA  SQLSoldier You rate your blog posts based on the number of retweets you get. #youmightbeaDBA  SQLSoldier You disable random logins just to mess with people. #youmightbeaDBA  SQLSoldier You fall for the pickup line, "Hey baby, what's your collation?" #youmightbeaDBA  SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA  SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier Your think the 4 food groups are coffee, bacon, fast food, and Mountain Dew. #youmightbeaDBA  SQLSoldier You tell someone your job title and they ask "What?" You describe it and they ask "What?". So you say "computer geek". #youmightbeaDBA  SQLSoldier The #1 referrer to your blog is Twitter.com. #youmightbeaDBA  SQLSoldier Your idea of a good time on a Saturday involves free training. #youmightbeaDBA #sqlsat43  SQLSoldier You write a book that all of your co-workers have and none have read it. #youmightbeaDBA  SQLSoldier You write a book that sells a couple thousand copies and is heralded a best seller. #youmightbeaDBA  SQLSoldier No matter how sick you are, you go to work if it's time to pass the pager on to the next guy. #youmightbeaDBA #TrueStory  SQLSoldier You go out on the town, and strangers walk up to you and say, "Hey you're that SQL guy" #youmightbeaDBA #TrueStory  SQLSoldier Your wife asks you to fix something, and you request a downtime window. #youmightbeaDBA  SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA  SQLSoldier Your best pickup line, "Hey baby, what's your collation?" #youmightbeaDBA  SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA  SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA  SQLSoldier You list TSQL as your native language on the 2010 census. #youmightbeaDBA  SQLSoldier Starbucks' stock price drops every time you go on vacation. #youmightbeaDBA  SQLSoldier You're happy when the web master says that the website is down. #youmightbeaDBA  SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA  SQLSoldier You get mad when someone calls your car a "heap" because you've always considered it to be a "clustered index". #youmightbeaDBA  SQLSoldier Your blog has more hits than your company's website. #youmightbeaDBA  SQLSoldier You systematically remove the asterisk key from all keyboards in the company except yours. #youmightbeaDBA  SQLSoldier When asked if you recycle, you reply that you run sp_cycle_errorlog every night at midnight #youmightbeaDBA  SQLSoldier You wouldn't allow someone named @AdamMachanic to work on your car. #youmightbeaDBA  SQLSoldier You switch offices every 3 days to avoid developers #youmightbeaDBA  SQLSoldier PSS has your number on speed dial. #youmightbeaDBA  SQLSoldier You frown when you they tell Neo that he's going to the Oracle #youmightbeaDBA  swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA  swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA  Tarwn A pleasurable saturday means spending the day learning more about what you already do the rest of the week #youmightbeaDBA ...oh, wait...  thelostforum For great justice; all our base are belong to YOU !! #youmightbeadba  thelostforum @SQLSoldier: You need a witness to use a mirror #youmightbeaDBA ;)  TimCost you capitalize key words. always. everywhere. you can't help it, usually don't even notice. #youmightbeaDBA  Toshana Your the only one in your company not impressed with the developers new application. #youmightbeaDBA  venzann Coming soon from a (respected) book publisher - @buckwoody's #youmightbeaDBA  venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets...  venzann I love the #youmightbeaDBA tag. Found at least 6 new DBAs to follow..  venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets...  venzann You use #sqlhelp as a primary resource during troubleshooting #youmightbeaDBA  venzann You insist on stricter password security for your sql servers than you implement on your own laptop #youmightbeaDBA  WesBrownSQL @buckwoody you are up so late the only tweets you see are from @buckwoody #youmightbeaDBA  WesBrownSQL @SQLSoldier you are upgrading all your 2005 prod servers to 2008 R2 on a three day weekend... #youmightbeaDBA  zippy1981 #youmightbeaDBA if everytime you do something with #mongodb you think of the Vulcan proverb "only Nixon could go to China."  Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Getting Selected Dropdown content to show in a form-generated email

  - by fmz

  I have a small contact form: <form method="post" action="contact.php" name="contactform" id="contactform"> <fieldset> <legend>Please fill in the following form to contact us</legend> <label for="name"><span class="required">*</span> Your Name</label> <input name="name" type="text" id="name" size="30" value="" /> <br /> <label for="company"><span class="required">*</span> Company</label> <input name="company" type="text" id="name" size="30" value="" /> <br /> <label for="email"><span class="required">*</span> Email</label> <input name="email" type="text" id="email" size="30" value="" /> <br /> <label for="phone"><span class="required">*</span> Phone</label> <input name="phone" type="text" id="phone" size="30" value="" /> <br /> <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" style="width: 300px; height:35px;"> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> <br /> <label for=comments><span class="required">*</span> Comments</label> <textarea name="comments" cols="40" rows="3" id="comments" style="width: 350px;"></textarea> <p><span class="required">*</span> Please help us control spam.</p> <label for=verify accesskey=V>&nbsp;&nbsp;&nbsp;3 + 1 =</label> <input name="verify" type="text" id="verify" size="4" value="" style="width: 30px;" /><br /><br /> <input type="submit" class="submit" id="submit" value="Submit" /> </fieldset> </form> I want to send the results of the form in a php generated email. Everything is coming through except the selected contents of the "purpose" drop down. Here is the PHP: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($company) == '') { echo '<div class="error_message">Attention! Please enter your company name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> What am I missing? Thanks.

  Read the article

• Zend/PHP: Problem uploading/downloading file to/from MySQL's BLOB field.

  - by NAVEED

  I am uploading file(any type) like this: (It is uploading content of file in blob field of mysql) $organizationModel = new Model_Organization_Object( organizationId ); $myFile = file_get_contents( '../path/to/my/file/filename.ext' ); $organizationModel->setOrganizationProfile( $myFile ); $organizationModel->save(); Now I want to get that file from database and want to download. I doing this in controller's action: (I am aspecting pdf file here therefore it is hardcoded below. But in future I want to download any file from blob field) $organizationModel = new Model_Organization_Object( $organizationId ); $content = $organizationModel->getOrganizationProfile(); header('Content-Type: application/octet-stream'); header("Content-Length: " . strlen($content) ); header('Content-Disposition: attachment; filename=orgProfile.pdf'); $this->view->organizationProfile = $content; Now in view file I am doing this: echo $this-organizationProfile; But above download process print(echo) the content of file in firbug and does not download file in orignal format. My echo output in firebug is like this: %PDF-1.3 %???? 84 0 obj << /Linearized 1 /O 86 /H [ 541 212 ] /L 958398 /E 11238 /N 27 /T 956600 >> endobj xref 84 7 0000000016 00000 n 0000000486 00000 n 0000000753 00000 n 0000000982 00000 n 0000001102 00000 n 0000000541 00000 n 0000000732 00000 n trailer << /Size 91 /Info 83 0 R /Root 85 0 R /Prev 956590 /ID[<0a8d7035bf08791da591e8cae39b8c49><0a8d7035bf08791da591e8cae39b8c49>] >> startxref 0 %%EOF 85 0 obj << /Type /Catalog /Pages 82 0 R >> endobj 89 0 obj << /S 151 /Filter /FlateDecode /Length 90 0 R >> stream H?b```f``?e`b`?f`@\0?.????\\I~aV$?X??dO????bA?Az?lv1o#?{-????1+??G?????N`?b? >?-?? \0\0D40 endstream endobj 90 0 obj 106 endobj 86 0 obj << /Type /Page /Contents 87 0 R /Parent 79 0 R /Resources << /XObject << /img0 88 0 R >> /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] >> /MediaBox [ 0 0 612 792 ] /CropBox [ 0 0 612 792 ] /Rotate 0 >> endobj 87 0 obj << /Filter /FlateDecode /Length 46 >> stream x?+T05???P0\0Bs#SC=S3c3??\\???t?|?@.\0??? endstream endobj 88 0 obj << /Filter /FlateDecode /Type /XObject /Length 8926 /BitsPerComponent 8 /Height 1122 /ColorSpace [ /Indexed /DeviceRGB 255 (\0\0\0JJJkkk{{{????????????????????????????????????\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0) ] /Subtype /Image /Width 793 >> stream x???v??\0?bF???mf?\\3??k?~? ?7uj??\\\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0~??/\0~??/\0~?&|??tp?pKS ????Fc???!?Q~?72?&???>???]?$?KUo????9?Tx??E8U}?????? _#=??6 Q{????v?T|s?>\\??w??.|??8?7Q????o.?o????????G??x??|?Is:??????oN>4???jJ?F?v? ? V?q<???P?????I>?.|?iT? ???Ç?Q?m????G?8c`????a`<?.|??~`????OG!?x7j??K*]??S?1??_??1\'?D?????0??\"?w\\?e?????<F:4????E-??Fa????O?v????9??_ m???P??8iuTr?i?FX?????<C? ????t:?(0??I>?2`????.???:??pv:???A??<$M??????e9??\\c???.0???t?kum?K;??<???\\@?]f/?h??m_???g???l?8&??*??2?-??Ew?4[j?v?(?????p?T???M--?8 cb??]?h??pN???kt?J$?m???X???5Cr?]?Jm?VP?X?Ð!? ?$???-?PM??O]??,?h???r=???qV}?p*?c?uq??t??????R6v??l8?I?e?9 {s\\K _?CN?^??W?8%p\']?2U?D{???Z?EB?*?d?va1^??Z\"?7?t]?TL?^??d???.|?4?q?2?&2??S{(??G?vNi4?D?K?)_^?]???D]DK???j?9????OQ?]???us?n?T4?om?P??E?|?t??w?????c?7>!]?\"}$??:??<????[9?C??Wi?u?su#9?\0?t?u=??=w??Q??A??.?dyb vN?N\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0??U/????<??v????S?A\\??qkm? !???&??J????!,??+?w;????{?!D???K×%5?E???????|n?FT*,? ?? ?j#Q??uT~r:}\\?_?????v???8Q?&? ???T?S?I\"?(>Y??????}H??aj?3??u?h?T?X?Z?-~??c\'P?^??d?????????]_???z??O]?q?????7??|?mN%??????T?????o???sUzT???m?v8?q? ??e]?wS???C~Ta???.??[%!??????2x]n~?7??????6.????K??;c }????r?)V?? u???*?7?$c\\???m?~???r??)U{?????????R?? ??D1L_????WUog?>??/?????????~?%???M???}\'?? ;???y??K`?????O?,??????<?,0???;3 #??m?v???aZ=?N?u?J`??dwnm;??.??k?n?K1-M?7????H&??????s?C??? ?}Z?1????c?(0?q?_1??7?%???G7U/??h9I??????S?Q??4nc?Lq??H6??;??c(/O??2???-?*_????%?I?/??I?o????ô?k??<????q??\'??]v?\"??+????,????qxgk?\\\\?6???7??Y???.G???Y??8??.??*???M_??J?hu1????z??W?o_??F?/???s?:?Y~??>0?g\\E?l?K5e???&L?/????k$????{?:\\>??Fs?-??l?>c??o?????9?V+?2;??}q?4 ?zS?|u?A`dK???n~?s???K?hiY?j??#p???S?M\\???0P2?\\*?m+?L5Er????[W?>9|???i?????}`Nmc:Qv??]&|?_????fx???????Ns~w??to????K?M???uN????0J6q1??u(b?M?_?????7?]?m?\':????S@???4?????\\??@~Mn?????|}?9?F6_Vr ??7??{?_??_????Y?Go?9??f1????E?|?Ucd? ????????t7k?? }??:??n?M?_????#?M$DG???:Z??y??;g:?|????F?m??e?F*?uJ?C??-?v?%??^?*??????z:l???w?e???9??i?5j???x?~??Ao???a?x?{?UL??? ??#:???\'^?????W??f;?u???ejq¯?u[?2K8??e?>/?ug?@S??L???? ??u0uI~?z?YYV???[[O?T??-Y?u?j?M?_???n&??7O?f??s??z`.`?,W??#?l??n???s??\'?????=??&#?z?M7_????s???x??y? ??u?p?G???0?e?G????8]{??N?1}??}~Q?[)?XF??_??*? p7iQ????M?(?l????????????f??6????*??U;@~\\k?i??w_??*?#???^?j?\\?L??/?}?Y?[??V??t~?w?n??a???m?O?(.?n;??ji:??W?ZnQ[9?n=?^??sE9??;?.??u3\"???<?L??y8?<H???g??u??\\?q???71p?U??}???f`?Y??m3b*C?t{?SX??7m<??6??8K??[Qs??&_??(M??:?Z???W?????W? ??4d??4?A????lw?e?d?>? ?pCV??h?SS?Z?T??4?N?,?? ?8=-?%???4?p?a??~??R?L??=J??j}??"??,?(?x?????????o?ï??t??X7???~jQ?aK???Z*YL????X??/?m?ot?9&s0???O5??j=?7sb?l?Mh???y?}Q\\4?MM?i5&?Yf??hS??N????\'?\0?????i?9??G?$??R?A1[??Y?t??4b?}????u??3?Y??Il????{??[u??f??q???Z_;??|*?t?uTO??}b?a?0>????>?>w\'P?E??]????6???v?^?,?;?uE?f?;?> yo?eNS@?C???I??????Otf????4I??? ?s????*??G?\'?>?</?=T?CE??5NR?~??%?1?d^V??O??????????e||/b??^ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0~????+?W8??t????????}????????X?????7??/???\\}LM?????b?#?q];J??[U???(0N??t?????[??_V?!??%????-?7:?m???9??Dau?o]??^????*??,???h?o3f??[%?FW?W!?X#; ?>HC?-?\'/??^??\'?*?)??!?_?e?+TC?7O??I.?[?tN?,??Rs???u???^???????q??S??.?c?UR?????? ????M????FS???A????>?^K?|[?]z~7??7u???7V]L?|??l???]?[e?+u?????{U}???Em??IWbV7????/v?x?zk??F@.??5?G?Í>f??_???Gg?}??tc??&R???n???G-?N]/?w?? ????f?}Ue%?;?~?:????`6(??_???g???`? E~?p06?}#/?G=????;??<$Y???l??m?T??@Y??p?????r??.?H?>\0.Ih??~???!?N/^o? ??&v??R???9?suJ?r???JZg?z?Y?7??^?J??H>{[?vQ????qw?e{{?l????????u]?.Z?xh%7??>?|???b`?K?|I\"?nh?m?????m?z5Qpw??N3???y?)??k??????,?Ws*SJ]????????!?o?Iq3~x??Az{?v]\'?k????k???Dc ?]??l?)L??? I8eG#r?dC??;??/C???l???rm???????e?6?M??fP?4?r??)?!?\\s???{??!cN??h??>?? ??o>??m?dO=&<??P??]=]???n?v??y?l??\"?K??????rF?I???)Z??]n?J??N?w???S/S??w???R6}\'u??kN?K`?C/???N??,??o??I?>?S?(??hOV????-]?p?r??0??u?(?,a????/???\"o;???44????P?9K!O]??x?r?}??8?????w?4?|?el7U??l.}|w?- ?=?Lq??e<&??g?/z8??7??:n?????ï??~??_?a???&?7sy???,?3?1??rV???m?????s??C?x50?????g???\\??!??????e?????/Cl?Y???:??jz3??????/?a?]}??\\n???BZ?0?J-+u??????x?=??CC??M??W[??v<???S14?????\\C?Z ??g???q:?u?C?k?vc?K?;??\"Y?t?r]??G?z????w???r??????0??????e?:??/f?*^?W?Q8WsN??9}*?|??~x)?N?=6J?l????M?b??????M45?C?k]??r?u??????r ] Can someone help that how to download file or I am doing something wrong with uploading process. setOrganizationProfile() and getOrganizationProfile() function are created by me which are working fine while storing/getting data to/from database. Thanks

  Read the article

• java inserting special characters with preparedstatement fails

  - by phill

  I am using an HTML form which sends <input type=hidden name=longdesc value='SMARTNET%^" 8X5XNBD'> this is done by the following javascript code: function masinsert(id) { var currentTime=new Date(); var button = document.getElementById("m"+id); button.onclick=""; button.value="Inserting"; var itemdescription = document.getElementById("itemdescription"+id).value; function handleHttpResponse() { if (http.readyState == 4) { button.value="Item Added"; } } var http = getHTTPObject(); // We create the HTTP Object var tempUrl = "\AInsert"; tempUrl += "itemdescription="+itemdescription+"&"+"itemshortdescription="+itemdescription.substring(0,37)+; alert(tempUrl); http.open("GET", tempUrl, true); http.onreadystatechange = handleHttpResponse; http.send(null); } to a java servlet. AInsert.java in the AInsert.java file, I do a String itemdescription = request.getParameter("longdesc"); which then sends the value to a preparedstatement to run an insert query. In the query, there are sometimes special characters which throw it off. For example, when I run the following insert into itemdescription (longdesc) values ('SMARTNET%^" 8X5XNBD') here is the actual snippet: PreparedStatement ps = conn.prepareStatement("INSERT INTO itemdescription (longdesc) values(?)"); ps.setString(1, itemdescription); ps.executeUpdate(); It will produce an error saying : Cannot insert the value NULL into column 'LongDesc', table 'App.dbo.itemdescription'; column does not allow nulls. Insert fails I have tried urlencode/urldecode String encodedString = URLEncoder.encode(longdesc, "UTF-8"); String decitemdescription = URLDecoder.decode(itemdescription, "UTF-8"); and i've also tried these functions //BEGIN URL Encoder final static String[] hex = { "%00", "%01", "%02", "%03", "%04", "%05", "%06", "%07", "%08", "%09", "%0a", "%0b", "%0c", "%0d", "%0e", "%0f", "%10", "%11", "%12", "%13", "%14", "%15", "%16", "%17", "%18", "%19", "%1a", "%1b", "%1c", "%1d", "%1e", "%1f", "%20", "%21", "%22", "%23", "%24", "%25", "%26", "%27", "%28", "%29", "%2a", "%2b", "%2c", "%2d", "%2e", "%2f", "%30", "%31", "%32", "%33", "%34", "%35", "%36", "%37", "%38", "%39", "%3a", "%3b", "%3c", "%3d", "%3e", "%3f", "%40", "%41", "%42", "%43", "%44", "%45", "%46", "%47", "%48", "%49", "%4a", "%4b", "%4c", "%4d", "%4e", "%4f", "%50", "%51", "%52", "%53", "%54", "%55", "%56", "%57", "%58", "%59", "%5a", "%5b", "%5c", "%5d", "%5e", "%5f", "%60", "%61", "%62", "%63", "%64", "%65", "%66", "%67", "%68", "%69", "%6a", "%6b", "%6c", "%6d", "%6e", "%6f", "%70", "%71", "%72", "%73", "%74", "%75", "%76", "%77", "%78", "%79", "%7a", "%7b", "%7c", "%7d", "%7e", "%7f", "%80", "%81", "%82", "%83", "%84", "%85", "%86", "%87", "%88", "%89", "%8a", "%8b", "%8c", "%8d", "%8e", "%8f", "%90", "%91", "%92", "%93", "%94", "%95", "%96", "%97", "%98", "%99", "%9a", "%9b", "%9c", "%9d", "%9e", "%9f", "%a0", "%a1", "%a2", "%a3", "%a4", "%a5", "%a6", "%a7", "%a8", "%a9", "%aa", "%ab", "%ac", "%ad", "%ae", "%af", "%b0", "%b1", "%b2", "%b3", "%b4", "%b5", "%b6", "%b7", "%b8", "%b9", "%ba", "%bb", "%bc", "%bd", "%be", "%bf", "%c0", "%c1", "%c2", "%c3", "%c4", "%c5", "%c6", "%c7", "%c8", "%c9", "%ca", "%cb", "%cc", "%cd", "%ce", "%cf", "%d0", "%d1", "%d2", "%d3", "%d4", "%d5", "%d6", "%d7", "%d8", "%d9", "%da", "%db", "%dc", "%dd", "%de", "%df", "%e0", "%e1", "%e2", "%e3", "%e4", "%e5", "%e6", "%e7", "%e8", "%e9", "%ea", "%eb", "%ec", "%ed", "%ee", "%ef", "%f0", "%f1", "%f2", "%f3", "%f4", "%f5", "%f6", "%f7", "%f8", "%f9", "%fa", "%fb", "%fc", "%fd", "%fe", "%ff" }; /** * Encode a string to the "x-www-form-urlencoded" form, enhanced * with the UTF-8-in-URL proposal. This is what happens: * * <ul> * <li><p>The ASCII characters 'a' through 'z', 'A' through 'Z', * and '0' through '9' remain the same. * * <li><p>The unreserved characters - _ . ! ~ * ' ( ) remain the same. * * <li><p>The space character ' ' is converted into a plus sign '+'. * * <li><p>All other ASCII characters are converted into the * 3-character string "%xy", where xy is * the two-digit hexadecimal representation of the character * code * * <li><p>All non-ASCII characters are encoded in two steps: first * to a sequence of 2 or 3 bytes, using the UTF-8 algorithm; * secondly each of these bytes is encoded as "%xx". * </ul> * * @param s The string to be encoded * @return The encoded string */ public static String encode(String s) { StringBuffer sbuf = new StringBuffer(); int len = s.length(); for (int i = 0; i < len; i++) { int ch = s.charAt(i); if ('A' <= ch && ch <= 'Z') { // 'A'..'Z' sbuf.append((char)ch); } else if ('a' <= ch && ch <= 'z') { // 'a'..'z' sbuf.append((char)ch); } else if ('0' <= ch && ch <= '9') { // '0'..'9' sbuf.append((char)ch); } else if (ch == ' ') { // space sbuf.append('+'); } else if (ch == '-' || ch == '_' // unreserved || ch == '.' || ch == '!' || ch == '~' || ch == '*' || ch == '\'' || ch == '(' || ch == ')') { sbuf.append((char)ch); } else if (ch <= 0x007f) { // other ASCII sbuf.append(hex[ch]); } else if (ch <= 0x07FF) { // non-ASCII <= 0x7FF sbuf.append(hex[0xc0 | (ch >> 6)]); sbuf.append(hex[0x80 | (ch & 0x3F)]); } else { // 0x7FF < ch <= 0xFFFF sbuf.append(hex[0xe0 | (ch >> 12)]); sbuf.append(hex[0x80 | ((ch >> 6) & 0x3F)]); sbuf.append(hex[0x80 | (ch & 0x3F)]); } } return sbuf.toString(); } //end encode and //decode url private static String unescape(String s) { StringBuffer sbuf = new StringBuffer () ; int l = s.length() ; int ch = -1 ; int b, sumb = 0; for (int i = 0, more = -1 ; i < l ; i++) { /* Get next byte b from URL segment s */ switch (ch = s.charAt(i)) { case '%': ch = s.charAt (++i) ; int hb = (Character.isDigit ((char) ch) ? ch - '0' : 10+Character.toLowerCase((char) ch) - 'a') & 0xF ; ch = s.charAt (++i) ; int lb = (Character.isDigit ((char) ch) ? ch - '0' : 10+Character.toLowerCase ((char) ch)-'a') & 0xF ; b = (hb << 4) | lb ; break ; case '+': b = ' ' ; break ; default: b = ch ; } /* Decode byte b as UTF-8, sumb collects incomplete chars */ if ((b & 0xc0) == 0x80) { // 10xxxxxx (continuation byte) sumb = (sumb << 6) | (b & 0x3f) ; // Add 6 bits to sumb if (--more == 0) sbuf.append((char) sumb) ; // Add char to sbuf } else if ((b & 0x80) == 0x00) { // 0xxxxxxx (yields 7 bits) sbuf.append((char) b) ; // Store in sbuf } else if ((b & 0xe0) == 0xc0) { // 110xxxxx (yields 5 bits) sumb = b & 0x1f; more = 1; // Expect 1 more byte } else if ((b & 0xf0) == 0xe0) { // 1110xxxx (yields 4 bits) sumb = b & 0x0f; more = 2; // Expect 2 more bytes } else if ((b & 0xf8) == 0xf0) { // 11110xxx (yields 3 bits) sumb = b & 0x07; more = 3; // Expect 3 more bytes } else if ((b & 0xfc) == 0xf8) { // 111110xx (yields 2 bits) sumb = b & 0x03; more = 4; // Expect 4 more bytes } else /*if ((b & 0xfe) == 0xfc)*/ { // 1111110x (yields 1 bit) sumb = b & 0x01; more = 5; // Expect 5 more bytes } /* We don't test if the UTF-8 encoding is well-formed */ } return sbuf.toString() ; } but the decoding doesn't change it back to the original special characters. Any ideas? thanks in advance UPDATE: I tried adding these two statements to grab the request String itemdescription = URLDecoder.decode(request.getParameter("itemdescription"), "UTF-8"); String itemshortdescription = URLDecoder.decode(request.getParameter("itemshortdescription"), "UTF-8"); System.out.println("processRequest | short descrip "); and this is failing as well if that helps. UPDATE2: I created an html form and did a direct insert with the encoded itemdescription such as and the insertion works correctly with the special charaters and everything. I guess there is something going on with my javascript submit. Any ideas on this?

  Read the article

• Referencing movie clips from within an actionscript class

  - by Ant

  Hi all, I have been given the task of adding a scoring system to various flash games. This simply involves taking input, adding functionality such as pausing and replaying and then outputting the score, time left etc. at the end. I've so far successfully edited two games. Both these games used the "actions" code on frames. The latest game I'm trying to do uses an actionscript class which makes it both easier and harder. I'm not very adept at flash at all, but I've worked it out so far. I've added various movie clips that are to be used for displaying the pause screen background, buttons for replaying etc. I've been showing and hiding these using: back._visible = true; //movie clip, instance of back (back.png) I doubt it's best practice, but it's quick and has been working. However, now with the change of coding style to classes, this doesn't seem to work. I kinda understand why, but I'm now unsure how to hide/show these elements. Any help would be greatly appreciated :) I've attached the modified AS. class RivalOrbs extends MovieClip { var infinite_levels, orbs_start, orbs_inc, orbs_per_level, show_timer, _parent, one_time_per_level, speed_start, speed_inc_percent, max_speed, percent_starting_on_wrong_side, colorize, colors, secs_per_level; function RivalOrbs() { super(); mc = this; this.init(); } // End of the function function get_num_orbs() { if (infinite_levels) { return (orbs_start + (level - 1) * orbs_inc); } else if (level > orbs_per_level.length) { return (0); } else { return (orbs_per_level[level - 1]); } // end else if } // End of the function function get_timer_str(secs) { var _loc2 = Math.floor(secs / 60); var _loc1 = secs % 60; return ((_loc2 > 0 ? (_loc2) : ("0")) + ":" + (_loc1 >= 10 ? (_loc1) : ("0" + _loc1))); } // End of the function function frame() { //PLACE PAUSE CODE HERE if (!Key.isDown(80) and !Key.isDown(Key.ESCAPE)) { _root.offKey = true; } else if (Key.isDown(80) or Key.isDown(Key.ESCAPE)) { if (_root.offKey and _root.game_mode == "play") { _root.game_mode = "pause"; /* back._visible = true; btn_resume._visible = true; btn_exit._visible = true; txt_pause._visible = true; */ } else if (_root.offKey and _root.game_mode == "pause") { _root.game_mode = "play"; } _root.offKey = false; } if (_root.game_mode == "pause" or paused) { return; } else { /* back._visible = false; btn_resume._visible = false; btn_exit._visible = false; txt_pause._visible = false; */ } if (show_timer && total_secs != -1 || show_timer && _parent.timesup) { _loc7 = total_secs - Math.ceil((getTimer() - timer) / 1000); var diff = oldSeconds - (_loc7 + additional); if (diff > 1) additional = additional + diff; _loc7 = _loc7 + additional; oldSeconds = _loc7; trace(oldSeconds); mc.timer_field.text = this.get_timer_str(Math.max(0, _loc7)); if (_loc7 <= -1 || _parent.timesup) { if (one_time_per_level) { _root.gotoAndPlay("Lose"); } else { this.show_dialog(false); return; } // end if } // end if } // end else if var _loc9 = _root._xmouse; var _loc8 = _root._ymouse; var _loc6 = {x: _loc9, y: _loc8}; mc.globalToLocal(_loc6); _loc6.y = Math.max(-mc.bg._height / 2 + gap / 2, _loc6.y); _loc6.y = Math.min(mc.bg._height / 2 - gap / 2, _loc6.y); mc.wall1._y = _loc6.y - gap / 2 - mc.wall1._height / 2; mc.wall2._y = _loc6.y + gap / 2 + mc.wall1._height / 2; var _loc5 = true; for (var _loc4 = 0; _loc4 < this.get_num_orbs(); ++_loc4) { var _loc3 = mc.stage["orb" + _loc4]; _loc3.x_last = _loc3._x; _loc3.y_last = _loc3._y; _loc3._x = _loc3._x + _loc3.x_speed; _loc3._y = _loc3._y + _loc3.y_speed; if (_loc3._x < l_thresh) { _loc3.x_speed = _loc3.x_speed * -1; _loc3._x = l_thresh + (l_thresh - _loc3._x); _loc3.gotoAndPlay("hit"); } // end if if (_loc3._x > r_thresh) { _loc3.x_speed = _loc3.x_speed * -1; _loc3._x = r_thresh - (_loc3._x - r_thresh); _loc3.gotoAndPlay("hit"); } // end if if (_loc3._y < t_thresh) { _loc3.y_speed = _loc3.y_speed * -1; _loc3._y = t_thresh + (t_thresh - _loc3._y); _loc3.gotoAndPlay("hit"); } // end if if (_loc3._y > b_thresh) { _loc3.y_speed = _loc3.y_speed * -1; _loc3._y = b_thresh - (_loc3._y - b_thresh); _loc3.gotoAndPlay("hit"); } // end if if (_loc3.x_speed > 0) { if (_loc3._x >= m1_thresh && _loc3.x_last < m1_thresh || _loc3._x >= m1_thresh && _loc3._x <= m2_thresh) { if (_loc3._y <= mc.wall1._y + mc.wall1._height / 2 || _loc3._y >= mc.wall2._y - mc.wall2._height / 2) { _loc3.x_speed = _loc3.x_speed * -1; _loc3._x = m1_thresh - (_loc3._x - m1_thresh); _loc3.gotoAndPlay("hit"); } // end if } // end if } else if (_loc3._x <= m2_thresh && _loc3.x_last > m2_thresh || _loc3._x >= m1_thresh && _loc3._x <= m2_thresh) { if (_loc3._y <= mc.wall1._y + mc.wall1._height / 2 || _loc3._y >= mc.wall2._y - mc.wall2._height / 2) { _loc3.x_speed = _loc3.x_speed * -1; _loc3._x = m2_thresh + (m2_thresh - _loc3._x); _loc3.gotoAndPlay("hit"); } // end if } // end else if if (_loc3.side == 1 && _loc3._x > 0) { _loc5 = false; } // end if if (_loc3.side == 2 && _loc3._x < 0) { _loc5 = false; } // end if } // end of for if (_loc5) { this.end_level(); } // end if } // End of the function function colorize_hex(mc, hex) { var _loc4 = hex >> 16; var _loc5 = (hex ^ hex >> 16 << 16) >> 8; var _loc3 = hex >> 8 << 8 ^ hex; var _loc2 = new flash.geom.ColorTransform(0, 0, 0, 1, _loc4, _loc5, _loc3, 0); mc.transform.colorTransform = _loc2; } // End of the function function tint_hex(mc, hex, amount) { var _loc4 = hex >> 16; var _loc5 = hex >> 8 & 255; var _loc3 = hex & 255; this.tint(mc, _loc4, _loc5, _loc3, amount); } // End of the function function tint(mc, r, g, b, amount) { var _loc4 = 100 - amount; var _loc1 = new Object(); _loc1.ra = _loc1.ga = _loc1.ba = _loc4; var _loc2 = amount / 100; _loc1.rb = r * _loc2; _loc1.gb = g * _loc2; _loc1.bb = b * _loc2; var _loc3 = new Color(mc); _loc3.setTransform(_loc1); } // End of the function function get_num_levels() { if (infinite_levels) { return (Number.MAX_VALUE); } else { return (orbs_per_level.length); } // end else if } // End of the function function end_level() { _global.inputTimeAvailable = _global.inputTimeAvailable - (60 - oldSeconds); ++level; _parent.levelOver = true; if (level <= this.get_num_levels()) { this.show_dialog(true); } else { _root.gotoAndPlay("Win"); } // end else if } // End of the function function get_speed() { var _loc3 = speed_start; for (var _loc2 = 0; _loc2 < level - 1; ++_loc2) { _loc3 = _loc3 + _loc3 * (speed_inc_percent / 100); } // end of for return (Math.min(_loc3, Math.max(max_speed, speed_start))); } // End of the function function init_orbs() { var _loc6 = this.get_speed(); var _loc7 = Math.max(1, Math.ceil(this.get_num_orbs() * (percent_starting_on_wrong_side / 100))); for (var _loc3 = 0; _loc3 < this.get_num_orbs(); ++_loc3) { var _loc2 = null; if (_loc3 % 2 == 0) { _loc2 = mc.stage.attachMovie("Orb1", "orb" + _loc3, _loc3); _loc2.side = 1; if (colorize && color1 != -1) { this.colorize_hex(_loc2.orb.bg, color1); } // end if _loc2._x = Math.random() * (mc.bg._width * 4.000000E-001) - mc.bg._width * 2.000000E-001 - mc.bg._width / 4; } else { _loc2 = mc.stage.attachMovie("Orb2", "orb" + _loc3, _loc3); _loc2.side = 2; if (colorize && color2 != -1) { this.colorize_hex(_loc2.orb.bg, color2); } // end if _loc2._x = Math.random() * (mc.bg._width * 4.000000E-001) - mc.bg._width * 2.000000E-001 + mc.bg._width / 4; } // end else if _loc2._width = _loc2._height = orb_w; _loc2._y = Math.random() * (mc.bg._height * 8.000000E-001) - mc.bg._height * 4.000000E-001; if (_loc3 < _loc7) { _loc2._x = _loc2._x * -1; } // end if var _loc5 = Math.random() * 60; var _loc4 = _loc5 / 180 * 3.141593E+000; _loc2.x_speed = Math.cos(_loc4) * _loc6; _loc2.y_speed = Math.sin(_loc4) * _loc6; if (Math.random() >= 5.000000E-001) { _loc2.x_speed = _loc2.x_speed * -1; } // end if if (Math.random() >= 5.000000E-001) { _loc2.y_speed = _loc2.y_speed * -1; } // end if } // end of for } // End of the function function init_colors() { if (colorize && colors.length >= 2) { color1 = colors[Math.floor(Math.random() * colors.length)]; for (color2 = colors[Math.floor(Math.random() * colors.length)]; color2 == color1; color2 = colors[Math.floor(Math.random() * colors.length)]) { } // end of for this.tint_hex(mc.side1, color1, 40); this.tint_hex(mc.side2, color2, 40); } else { color1 = -1; color2 = -1; } // end else if } // End of the function function get_total_secs() { if (show_timer) { if (secs_per_level.length > 0) { if (level > secs_per_level.length) { return (secs_per_level[secs_per_level.length - 1]); } else { return (secs_per_level[level - 1]); } // end if } // end if } // end else if return (-1); } // End of the function function start_level() { trace ("start_level"); _parent.timesup = false; _parent.levelOver = false; _parent.times_up_comp.start_timer(); this.init_orbs(); mc.level_field.text = "LEVEL " + level; total_secs = _global.inputTimeAvailable; if (total_secs > 60) total_secs = 60; timer = getTimer(); paused = false; mc.dialog.gotoAndPlay("off"); } // End of the function function clear_orbs() { for (var _loc2 = 0; mc.stage["orb" + _loc2]; ++_loc2) { mc.stage["orb" + _loc2].removeMovieClip(); } // end of for } // End of the function function show_dialog(new_level) { mc.back._visible = false; trace("yes"); paused = true; if (new_level) { this.init_colors(); } // end if this.clear_orbs(); mc.dialog.gotoAndPlay("level"); if (!new_level || _parent.timesup) { mc.dialog.level_top.text = "Time\'s Up!"; /* dyn_line1.text = "Goodbye " + _global.inputName + "!"; dyn_line2.text = "You scored " + score; //buttons if (_global.inputTimeAvailable > 60) btn_replay._visible = true; btn_resume._visible = false; btn_exit._visible = false; txt_pause._visible = false; sendInfo = new LoadVars(); sendLoader = new LoadVars(); sendInfo.game_name = 'rival_orbs'; sendInfo.timeavailable = _global.inputTimeAvailable; if (sendInfo.timeavailable < 0) sendInfo.timeavailable = 0; sendInfo.id = _global.inputId; sendInfo.score = level*_global.inputFactor; sendInfo.directive = 'record'; //sendInfo.sendAndLoad('ncc1701e.aspx', sendLoader, "GET"); sendInfo.sendAndLoad('http://keyload.co.uk/output.php', sendLoader, "POST"); */ } else if (level > 1) { mc.dialog.level_top.text = "Next Level:"; } else { mc.dialog.level_top.text = ""; } // end else if mc.dialog.level_num.text = "LEVEL " + level; mc.dialog.level_mid.text = "Number of Orbs: " + this.get_num_orbs(); _root.max_level = level; var _this = this; mc.dialog.btn.onRelease = function () { _this.start_level(); }; } // End of the function function init() { var getInfo = new LoadVars(); var getLoader = new LoadVars(); getInfo.directive = "read"; getInfo.sendAndLoad('http://keyload.co.uk/input.php', getLoader, "GET"); getLoader.onLoad = function (success) { if (success) { _global.inputId = this.id; _global.inputTimeAvailable = this.timeavailable; _global.inputFactor = this.factor; _global.inputName = this.name; } else { trace("Failed"); } } _root.game_mode = "play"; /* back._visible = false; btn_exit._visible = false; btn_replay._visible = false; btn_resume._visible = false; txt_pause._visible = false; */ l_thresh = -mc.bg._width / 2 + orb_w / 2; t_thresh = -mc.bg._height / 2 + orb_w / 2; r_thresh = mc.bg._width / 2 - orb_w / 2; b_thresh = mc.bg._height / 2 - orb_w / 2; m1_thresh = -wall_w / 2 - orb_w / 2; m2_thresh = wall_w / 2 + orb_w / 2; this.show_dialog(true); mc.onEnterFrame = frame; } // End of the function var mc = null; var orb_w = 15; var wall_w = 2; var l_thresh = 0; var r_thresh = 0; var t_thresh = 0; var b_thresh = 0; var m1_thresh = 0; var m2_thresh = 0; var color1 = -1; var color2 = -1; var level = 1; var total_secs = 30; var gap = 60; var timer = 0; var additional = 0; var oldSeconds = 0; var paused = true; var _loc7 = 0; } // End of Class

  Read the article

• How to set up dual quadro cards on RHEL 5.5?

  - by Alex J. Roberts

  I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). Neither separate X screens nor Xinerama are working. The kernel version is 2.6.18-194.el5 I've tried nvidia drivers 185.18.36 (the ones that i was using on 5.2) and the latest 260.19.36 and neither works. My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:10:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:129:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection And the Xorg Log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.18-164.11.1.el5 x86_64 Red Hat, Inc. Current Operating System: Linux blur.svsdsde 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 Build Date: 06 March 2010 Build ID: xorg-x11-server 1.1.1-48.76.el5 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 09:52:08 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Device1" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) FontPath set to: unix/:7100 (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Option "Xinerama" "1" (**) Xinerama: enabled (==) Max clients allowed: 512, resource mask: 0xfffff (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 103c,1500 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0051 card 103c,1500 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 103c,1500 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 103c,1500 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 103c,1500 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 103c,1500 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 103c,1500 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 103c,1500 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:05:0: chip 104c,8023 card 103c,1500 rev 00 class 0c,00,10 hdr 00 (II) PCI: 0a:00:0: chip 10de,009d card 10de,02af rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf5000000 - 0xf50fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 10: bridge is at (0:14:0), (0,10,10), BCTRL: 0x000a (VGA_EN is set) (II) Bus 10 I/O range: [0] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B] (II) Bus 10 non-prefetchable memory range: [0] -1 0 0xf3000000 - 0xf4ffffff (0x2000000) MX[B] (II) Bus 10 prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(10:0:0) nVidia Corporation Quadro FX 4500 rev 161, Mem @ 0xf3000000/24, 0xc0000000/28, 0xf4000000/24, I/O @ 0x3000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 0a:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:10:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 4500 at PCI:10:0:0: (--) NVIDIA(0): DELL 3007WFP (DFP-0) (--) NVIDIA(0): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(0): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) NVIDIA(GPU-1): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:129:0:0 (GPU-1) (--) NVIDIA(GPU-1): Memory: 524288 kBytes (--) NVIDIA(GPU-1): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU (--) NVIDIA(GPU-1): Connected display device(s) on Quadro FX 4500 at PCI:129:0:0: (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0) (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Disabling Composite since Xinerama is enabled (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) Open ACPI successful (/var/run/acpid.socket) (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Mouse0: ps2EnableDataReporting: succeeded (the snipped part can be changed if necessary) Any help at all would be appreciated. Cheers, Alex

  Read the article

• Why is my PE file invalid?

  - by Pindatjuh

  I already asked a similar question, "PE Header requirements", but I'm not really satisfied with it's answer. I am building an assembler/linker, in Java SE 1.6. I have read about 5 different documentations/specifications about the PE/COFF header and file format, but I'm stuck at a problem: My generated file is not valid, says Windows: "X is not a valid Win32 application." I'm clueless of what can be wrong; I have double-checked every entry in the PE Header and PE Optional Header, and all seems to be right. I've got four sections: code (RVA 0x1000, File 0x400) data (RVA 0x2000, File 0x600) import (RVA 0x3000, File 0x800) reloc (RVA 0x4000, File 0xA00) My entrypoint value is at 0x1000 (the beginning of code) and my imagebase is 0x400000. Section alignment is 0x1000 and file alignment is 0x200. Here is the file (3 kb): 4D 5A 6C 00 01 00 00 00 04 00 11 00 FF FF 03 00 00 01 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 00 00 00 0E 1F BA 0E 00 B4 09 CD 21 B8 00 4C CD 21 54 68 69 73 20 70 72 6F 67 72 61 6D 20 72 65 71 75 69 72 65 73 20 57 69 6E 33 32 0D 0A 24 00 00 00 00 50 45 00 00 4C 01 04 00 6A C4 4D 69 00 00 00 00 00 00 00 00 E0 00 02 01 0B 01 08 00 00 10 00 00 00 10 00 00 00 00 00 00 00 10 00 00 00 10 00 00 00 20 00 00 00 00 40 00 00 10 00 00 00 02 00 00 04 00 00 00 0D 00 25 00 04 00 00 00 00 00 00 00 04 0A 00 00 00 04 00 00 00 00 00 00 02 00 00 00 00 00 04 00 00 10 01 00 00 00 10 00 00 10 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2E 63 6F 64 65 00 00 00 00 10 00 00 00 10 00 00 23 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 60 2E 64 61 74 61 00 00 00 00 10 00 00 00 20 00 00 23 00 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 C0 2E 69 6D 70 6F 72 74 00 00 10 00 00 00 30 00 00 90 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 50 2E 72 65 6C 6F 63 00 00 00 10 00 00 00 40 00 00 04 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 52 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 68 00 00 00 00 68 0D 20 40 00 68 00 20 40 00 68 00 00 00 00 E8 64 30 40 00 68 00 00 00 00 E8 6C 30 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 48 65 6C 6C 6F 20 57 6F 72 6C 64 21 00 48 65 6C 6C 6F 20 53 74 61 63 6B 20 4F 76 65 72 66 6C 6F 77 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 54 30 00 00 00 00 00 00 00 00 00 00 3C 30 00 00 64 30 00 00 5C 30 00 00 00 00 00 00 00 00 00 00 47 30 00 00 6C 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 75 73 65 72 33 32 2E 64 6C 6C 00 6B 65 72 6E 65 6C 33 32 2E 64 6C 6C 00 74 30 00 00 00 00 00 00 82 30 00 00 00 00 00 00 74 30 00 00 00 00 00 00 82 30 00 00 00 00 00 00 00 00 4D 65 73 73 61 67 65 42 6F 78 41 00 00 00 45 78 69 74 50 72 6F 63 65 73 73 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 74 65 73 74 So: I grabbed a valid PE file (a simple "Hello World" message box application), and started to modify it, with a hex-editor (HxD). I got a lot of different error messages, not the "X is not a valid Win32 application.": I'm aware that my code content is not "valid" code, but I've tested it out: invalid code gives an Application Crash error. If the import-section content is invalid in the "Hello World" PE file, it gives me the error "Procedure point cannot be found in [...]", or "Application has failed to start because [..] dll is not found.", or an Application Crash. These errors are all very useful; they all give me some clue what was wrong. But my PE file, with the error "X is not a valid Win32 application.", drives me insane: What is wrong with my PE file?

  Read the article

• Ubuntu 10.04 not detecting multiple monitors

  - by user28837

  I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks. As per request: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-25-server i686 Ubuntu Current Operating System: Linux jeff-desktop 2.6.32-22-generic-pae #33-Ubuntu SMP Wed Apr 28 14:57:29 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=852e1013-4ed6-40fd-a462-c29087888383 ro quiet splash Build Date: 23 April 2010 05:11:50PM xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 08:24:52 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Default Device" (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81f0e80 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9442:174b:e104 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xfe7e0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 1002:954f:1462:1618 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 (II) ATI Proprietary Linux Driver Version Identifier:8.72.11 (II) ATI Proprietary Linux Driver Release Identifier: 8.723.1 (II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29 (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Assigning device section with no busID to primary device (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found (--) Chipset Supported AMD Graphics Processor (0x9442) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found (**) ChipID override: 0x954F (**) Chipset Supported AMD Graphics Processor (0x954F) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x9428aa0 (II) pEnt->device->identifier=(nil) (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 11, (OK) ukiOpenByBusid: ukiOpenMinor returns 11 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe104) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 (--) fglrx(0): MMIO registers at 0xfe7e0000 (--) fglrx(0): I/O port at 0x0000a000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 11.13 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: RV770 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series" (Chipset = 0x954f) (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1618) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfe8e0000 (--) fglrx(0): I/O port at 0x0000b000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): Interrupt handler installed at IRQ 31. (II) fglrx(0): Using adapter: 2:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP on external TMDS [tmds2] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: DEL Model: a038 Serial#: 810829397 (II) fglrx(0): Year: 2008 Week: 51 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 (II) fglrx(0): Supported established timings: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 298 mm (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 (II) fglrx(0): Serial No: Y183D8CF0TFU (II) fglrx(0): Monitor name: DELL S2409W (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff0010ac38a055465430 (II) fglrx(0): 3312010380351e78eeee91a3544c9926 (II) fglrx(0): 0f5054a54b00714f8180d1c001010101 (II) fglrx(0): 010101010101023a801871382d40582c (II) fglrx(0): 4500132a2100001e000000ff00593138 (II) fglrx(0): 3344384346305446550a000000fc0044 (II) fglrx(0): 454c4c205332343039570a20000000fd (II) fglrx(0): 00324c1e5311000a2020202020200059 (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP2 has no monitor section (II) fglrx(0): Output DFP_EXTTMDS has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP2 disconnected (II) fglrx(0): Output DFP_EXTTMDS connected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP_EXTTMDS using initial mode 1920x1080 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6996000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.72.11 (II) fglrx(0): Date: Apr 8 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic-pae (II) fglrx(0): Build-Kernel MODVERSIONS: yes (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 320 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (==) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (--) RandR disabled (II) Found 2 VGA devices: arbiter wrapping enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 507 x 285 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Power Button (/dev/input/event0) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3) (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Found relative axes (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event6) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event6" (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as keyboard (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event7) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event7" (II) KEYBOARD: Found 14 mouse buttons (II) KEYBOARD: Found scroll wheel(s) (II) KEYBOARD: Found relative axes (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as mouse (II) KEYBOARD: Configuring as keyboard (**) KEYBOARD: YAxisMapping: buttons 4 and 5 (**) KEYBOARD: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (EE) KEYBOARD: failed to initialize for relative axes. (II) config/udev: Adding input device KEYBOARD (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

  Read the article

• Too many sleeping processes?

  - by user55859

  I'm running Debian Lenny (x86_64) on a cloud VPS (Xen) and top command tells me there are 210 processes running and 209 are sleeping: top - 14:49:29 up 15:18, 1 user, load average: 0.09, 0.11, 0.05 Tasks: 210 total, 1 running, 209 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 532288k total, 437316k used, 94972k free, 30584k buffers Swap: 1048568k total, 408k used, 1048160k free, 219772k cached And here is what ps aux command gives me: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.1 10380 812 ? Ss Sep30 0:00 init [2] root 2 0.0 0.0 0 0 ? S< Sep30 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< Sep30 0:00 [events/0] root 6 0.0 0.0 0 0 ? S< Sep30 0:00 [khelper] root 7 0.0 0.0 0 0 ? S< Sep30 0:05 [xenwatch] root 8 0.0 0.0 0 0 ? S< Sep30 0:13 [xenbus] root 10 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/1] root 11 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/1] root 12 0.0 0.0 0 0 ? S< Sep30 0:00 [events/1] root 13 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/2] root 14 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/2] root 15 0.0 0.0 0 0 ? S< Sep30 0:00 [events/2] root 16 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/3] root 17 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/3] root 18 0.0 0.0 0 0 ? S< Sep30 0:00 [events/3] root 19 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/4] root 20 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/4] root 21 0.0 0.0 0 0 ? S< Sep30 0:00 [events/4] root 22 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/5] root 23 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/5] root 24 0.0 0.0 0 0 ? S< Sep30 0:00 [events/5] root 25 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/6] root 26 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/6] root 27 0.0 0.0 0 0 ? S< Sep30 0:00 [events/6] root 28 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/7] root 29 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/7] root 30 0.0 0.0 0 0 ? S< Sep30 0:00 [events/7] root 31 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/8] root 32 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/8] root 33 0.0 0.0 0 0 ? S< Sep30 0:00 [events/8] root 34 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/9] root 35 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/9] root 36 0.0 0.0 0 0 ? S< Sep30 0:00 [events/9] root 37 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/10] root 38 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/10] root 39 0.0 0.0 0 0 ? S< Sep30 0:04 [events/10] root 40 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/11] root 41 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/11] root 42 0.0 0.0 0 0 ? S< Sep30 0:00 [events/11] root 43 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/12] root 44 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/12] root 45 0.0 0.0 0 0 ? S< Sep30 0:00 [events/12] root 46 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/13] root 47 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/13] root 48 0.0 0.0 0 0 ? S< Sep30 0:00 [events/13] root 49 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/14] root 50 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/14] root 51 0.0 0.0 0 0 ? S< Sep30 0:00 [events/14] root 52 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/15] root 53 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/15] root 54 0.0 0.0 0 0 ? S< Sep30 0:00 [events/15] root 55 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/0] root 56 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/1] root 57 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/2] root 58 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/3] root 59 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/4] root 60 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/5] root 61 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/6] root 62 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/7] root 63 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/8] root 64 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/9] root 65 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/10] root 66 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/11] root 67 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/12] root 68 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/13] root 69 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/14] root 70 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/15] root 71 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/0] root 72 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/1] root 73 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/2] root 74 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/3] root 75 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/4] root 76 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/5] root 77 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/6] root 78 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/7] root 79 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/8] root 80 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/9] root 81 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/10] root 82 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/11] root 83 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/12] root 84 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/13] root 85 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/14] root 86 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/15] root 87 0.0 0.0 0 0 ? S< Sep30 0:00 [cqueue] root 88 0.0 0.0 0 0 ? S< Sep30 0:00 [kseriod] root 89 0.0 0.0 0 0 ? S Sep30 0:00 [pdflush] root 90 0.0 0.0 0 0 ? S Sep30 0:00 [pdflush] root 91 0.0 0.0 0 0 ? S< Sep30 0:00 [kswapd0] root 92 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/0] root 93 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/1] root 94 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/2] root 95 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/3] root 96 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/4] root 97 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/5] root 98 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/6] root 99 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/7] root 100 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/8] root 101 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/9] root 102 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/10] root 103 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/11] root 104 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/12] root 105 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/13] root 106 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/14] root 107 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/15] root 108 0.0 0.0 0 0 ? S< Sep30 0:00 [kpsmoused] root 167 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/0] root 168 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/1] root 169 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/2] root 170 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/3] root 171 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/4] root 172 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/5] root 173 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/6] root 174 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/7] root 175 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/8] root 176 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/9] root 177 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/10] root 178 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/11] root 179 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/12] root 180 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/13] root 181 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/14] root 182 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/15] root 315 0.0 0.0 0 0 ? S< Sep30 0:00 [xfs_mru_cache] root 316 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/0] root 317 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/1] root 318 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/2] root 319 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/3] root 320 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/4] root 321 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/5] root 322 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/6] root 323 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/7] root 324 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/8] root 325 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/9] root 326 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/10] root 327 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/11] root 328 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/12] root 329 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/13] root 330 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/14] root 331 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/15] root 332 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/0] root 333 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/1] root 334 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/2] root 335 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/3] root 336 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/4] root 337 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/5] root 338 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/6] root 339 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/7] root 340 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/8] root 341 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/9] root 342 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/10] root 343 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/11] root 344 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/12] root 345 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/13] root 346 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/14] root 347 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/15] root 399 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsIO] root 400 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 401 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 402 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 403 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 404 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 405 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 406 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 407 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 408 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 409 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 410 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 411 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 412 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 413 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 414 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 415 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 416 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsSync] root 673 0.0 0.0 0 0 ? S< Sep30 0:00 [kjournald] root 727 0.0 0.1 16840 960 ? S<s Sep30 0:00 udevd --daemon root 1273 0.0 0.3 122036 2016 ? Sl Sep30 0:00 /usr/sbin/rsyslogd -c3 root 1306 0.0 0.2 48960 1224 ? Ss Sep30 0:00 /usr/sbin/sshd root 1809 0.0 0.2 21276 1076 ? Ss Sep30 0:00 /usr/sbin/cron root 1873 0.0 1.5 41460 8360 ? Ss Sep30 0:02 /usr/sbin/munin-node root 1896 0.0 0.1 3864 608 tty1 Ss+ Sep30 0:00 /sbin/getty 38400 tty1 root 1897 0.0 0.1 3864 604 tty2 Ss+ Sep30 0:00 /sbin/getty 38400 tty2 root 1898 0.0 0.1 3864 604 tty3 Ss+ Sep30 0:00 /sbin/getty 38400 tty3 root 1899 0.0 0.1 3864 608 tty4 Ss+ Sep30 0:00 /sbin/getty 38400 tty4 root 1900 0.0 0.1 3864 608 tty5 Ss+ Sep30 0:00 /sbin/getty 38400 tty5 root 1901 0.0 0.1 3864 604 tty6 Ss+ Sep30 0:00 /sbin/getty 38400 tty6 101 4526 0.0 0.1 42820 1052 ? Ss 12:27 0:00 /usr/sbin/exim4 -bd -q30m root 8865 0.0 0.2 11668 1432 pts/0 S 13:18 0:00 /bin/sh /usr/bin/mysqld_safe mysql 8980 0.0 9.0 175284 48368 pts/0 Sl 13:18 0:05 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/my root 8981 0.0 0.1 6480 684 pts/0 S 13:18 0:00 logger -t mysqld -p daemon.error root 13730 0.0 0.8 149144 4712 ? Ss 14:05 0:00 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf www-data 13731 0.2 11.4 172756 61136 ? S 14:05 0:05 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf www-data 13732 0.2 8.9 158516 47712 ? S 14:05 0:05 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf www-data 13733 0.1 8.1 156576 43468 ? S 14:05 0:04 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf root 14601 0.0 0.2 30600 1240 ? Ss 14:15 0:00 nginx: master process /usr/sbin/nginx www-data 14602 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14603 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14604 0.0 0.5 31552 2852 ? S 14:15 0:00 nginx: worker process www-data 14605 0.0 0.4 31240 2580 ? S 14:15 0:00 nginx: worker process www-data 14606 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14607 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14608 0.0 0.4 31244 2536 ? S 14:15 0:00 nginx: worker process www-data 14609 0.0 0.5 31544 2788 ? S 14:15 0:00 nginx: worker process root 17169 0.0 0.2 17456 1160 pts/0 R+ 14:45 0:00 ps aux root 26391 0.0 0.6 66168 3284 ? Ss 10:32 0:00 sshd: root@notty root 26394 0.0 0.3 42376 2120 ? Ss 10:32 0:00 /usr/lib/openssh/sftp-server root 31500 0.0 0.6 66140 3248 ? Ss 11:33 0:00 sshd: root@pts/0 root 31503 0.0 0.3 20248 1924 pts/0 Ss 11:33 0:00 -bash root 31509 0.0 0.6 66168 3264 ? Ss 11:34 0:00 sshd: root@notty root 31512 0.0 0.3 42180 1984 ? Ss 11:34 0:00 /usr/lib/openssh/sftp-server I'm wondering if this is normal situation? Do I need all of those process? Thanks for any suggestions!

  Read the article

• High Linux loads on low CPU/memory usage

  - by user13323

  Hi. I have quite strange situation, where my CentOS 5.5 box loads are high, but the CPU and memory used are pretty low: top - 20:41:38 up 42 days, 6:14, 2 users, load average: 19.79, 21.25, 18.87 Tasks: 254 total, 1 running, 253 sleeping, 0 stopped, 0 zombie Cpu(s): 3.8%us, 0.3%sy, 0.1%ni, 95.0%id, 0.6%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 4035284k total, 4008084k used, 27200k free, 38748k buffers Swap: 4208928k total, 242576k used, 3966352k free, 1465008k cached free -mt total used free shared buffers cached Mem: 3940 3910 29 0 37 1427 -/+ buffers/cache: 2445 1495 Swap: 4110 236 3873 Total: 8050 4147 3903 Iostat also shows good results: avg-cpu: %user %nice %system %iowait %steal %idle 3.83 0.13 0.41 0.58 0.00 95.05 Here is the ps aux output: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 10348 80 ? Ss 2010 2:11 init [3] root 2 0.0 0.0 0 0 ? S< 2010 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/0] root 5 0.0 0.0 0 0 ? S< 2010 0:02 [migration/1] root 6 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/1] root 7 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/1] root 8 0.0 0.0 0 0 ? S< 2010 0:02 [migration/2] root 9 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/2] root 10 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/2] root 11 0.0 0.0 0 0 ? S< 2010 0:02 [migration/3] root 12 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/3] root 13 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/3] root 14 0.0 0.0 0 0 ? S< 2010 0:03 [migration/4] root 15 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/4] root 16 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/4] root 17 0.0 0.0 0 0 ? S< 2010 0:01 [migration/5] root 18 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/5] root 19 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/5] root 20 0.0 0.0 0 0 ? S< 2010 0:11 [migration/6] root 21 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/6] root 22 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/6] root 23 0.0 0.0 0 0 ? S< 2010 0:01 [migration/7] root 24 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/7] root 25 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/7] root 26 0.0 0.0 0 0 ? S< 2010 0:00 [migration/8] root 27 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/8] root 28 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/8] root 29 0.0 0.0 0 0 ? S< 2010 0:00 [migration/9] root 30 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/9] root 31 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/9] root 32 0.0 0.0 0 0 ? S< 2010 0:08 [migration/10] root 33 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/10] root 34 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/10] root 35 0.0 0.0 0 0 ? S< 2010 0:05 [migration/11] root 36 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/11] root 37 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/11] root 38 0.0 0.0 0 0 ? S< 2010 0:02 [migration/12] root 39 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/12] root 40 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/12] root 41 0.0 0.0 0 0 ? S< 2010 0:14 [migration/13] root 42 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/13] root 43 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/13] root 44 0.0 0.0 0 0 ? S< 2010 0:04 [migration/14] root 45 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/14] root 46 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/14] root 47 0.0 0.0 0 0 ? S< 2010 0:01 [migration/15] root 48 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/15] root 49 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/15] root 50 0.0 0.0 0 0 ? S< 2010 0:00 [events/0] root 51 0.0 0.0 0 0 ? S< 2010 0:00 [events/1] root 52 0.0 0.0 0 0 ? S< 2010 0:00 [events/2] root 53 0.0 0.0 0 0 ? S< 2010 0:00 [events/3] root 54 0.0 0.0 0 0 ? S< 2010 0:00 [events/4] root 55 0.0 0.0 0 0 ? S< 2010 0:00 [events/5] root 56 0.0 0.0 0 0 ? S< 2010 0:00 [events/6] root 57 0.0 0.0 0 0 ? S< 2010 0:00 [events/7] root 58 0.0 0.0 0 0 ? S< 2010 0:00 [events/8] root 59 0.0 0.0 0 0 ? S< 2010 0:00 [events/9] root 60 0.0 0.0 0 0 ? S< 2010 0:00 [events/10] root 61 0.0 0.0 0 0 ? S< 2010 0:00 [events/11] root 62 0.0 0.0 0 0 ? S< 2010 0:00 [events/12] root 63 0.0 0.0 0 0 ? S< 2010 0:00 [events/13] root 64 0.0 0.0 0 0 ? S< 2010 0:00 [events/14] root 65 0.0 0.0 0 0 ? S< 2010 0:00 [events/15] root 66 0.0 0.0 0 0 ? S< 2010 0:00 [khelper] root 107 0.0 0.0 0 0 ? S< 2010 0:00 [kthread] root 126 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/0] root 127 0.0 0.0 0 0 ? S< 2010 0:03 [kblockd/1] root 128 0.0 0.0 0 0 ? S< 2010 0:01 [kblockd/2] root 129 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/3] root 130 0.0 0.0 0 0 ? S< 2010 0:05 [kblockd/4] root 131 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/5] root 132 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/6] root 133 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/7] root 134 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/8] root 135 0.0 0.0 0 0 ? S< 2010 0:02 [kblockd/9] root 136 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/10] root 137 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/11] root 138 0.0 0.0 0 0 ? S< 2010 0:04 [kblockd/12] root 139 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/13] root 140 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/14] root 141 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/15] root 142 0.0 0.0 0 0 ? S< 2010 0:00 [kacpid] root 281 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/0] root 282 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/1] root 283 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/2] root 284 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/3] root 285 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/4] root 286 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/5] root 287 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/6] root 288 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/7] root 289 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/8] root 290 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/9] root 291 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/10] root 292 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/11] root 293 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/12] root 294 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/13] root 295 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/14] root 296 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/15] root 299 0.0 0.0 0 0 ? S< 2010 0:00 [khubd] root 301 0.0 0.0 0 0 ? S< 2010 0:00 [kseriod] root 490 0.0 0.0 0 0 ? S 2010 0:00 [khungtaskd] root 493 0.1 0.0 0 0 ? S< 2010 94:48 [kswapd1] root 494 0.0 0.0 0 0 ? S< 2010 0:00 [aio/0] root 495 0.0 0.0 0 0 ? S< 2010 0:00 [aio/1] root 496 0.0 0.0 0 0 ? S< 2010 0:00 [aio/2] root 497 0.0 0.0 0 0 ? S< 2010 0:00 [aio/3] root 498 0.0 0.0 0 0 ? S< 2010 0:00 [aio/4] root 499 0.0 0.0 0 0 ? S< 2010 0:00 [aio/5] root 500 0.0 0.0 0 0 ? S< 2010 0:00 [aio/6] root 501 0.0 0.0 0 0 ? S< 2010 0:00 [aio/7] root 502 0.0 0.0 0 0 ? S< 2010 0:00 [aio/8] root 503 0.0 0.0 0 0 ? S< 2010 0:00 [aio/9] root 504 0.0 0.0 0 0 ? S< 2010 0:00 [aio/10] root 505 0.0 0.0 0 0 ? S< 2010 0:00 [aio/11] root 506 0.0 0.0 0 0 ? S< 2010 0:00 [aio/12] root 507 0.0 0.0 0 0 ? S< 2010 0:00 [aio/13] root 508 0.0 0.0 0 0 ? S< 2010 0:00 [aio/14] root 509 0.0 0.0 0 0 ? S< 2010 0:00 [aio/15] root 665 0.0 0.0 0 0 ? S< 2010 0:00 [kpsmoused] root 808 0.0 0.0 0 0 ? S< 2010 0:00 [ata/0] root 809 0.0 0.0 0 0 ? S< 2010 0:00 [ata/1] root 810 0.0 0.0 0 0 ? S< 2010 0:00 [ata/2] root 811 0.0 0.0 0 0 ? S< 2010 0:00 [ata/3] root 812 0.0 0.0 0 0 ? S< 2010 0:00 [ata/4] root 813 0.0 0.0 0 0 ? S< 2010 0:00 [ata/5] root 814 0.0 0.0 0 0 ? S< 2010 0:00 [ata/6] root 815 0.0 0.0 0 0 ? S< 2010 0:00 [ata/7] root 816 0.0 0.0 0 0 ? S< 2010 0:00 [ata/8] root 817 0.0 0.0 0 0 ? S< 2010 0:00 [ata/9] root 818 0.0 0.0 0 0 ? S< 2010 0:00 [ata/10] root 819 0.0 0.0 0 0 ? S< 2010 0:00 [ata/11] root 820 0.0 0.0 0 0 ? S< 2010 0:00 [ata/12] root 821 0.0 0.0 0 0 ? S< 2010 0:00 [ata/13] root 822 0.0 0.0 0 0 ? S< 2010 0:00 [ata/14] root 823 0.0 0.0 0 0 ? S< 2010 0:00 [ata/15] root 824 0.0 0.0 0 0 ? S< 2010 0:00 [ata_aux] root 842 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_0] root 843 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_1] root 844 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_2] root 845 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_3] root 846 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_4] root 847 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_5] root 882 0.0 0.0 0 0 ? S< 2010 0:00 [kstriped] root 951 0.0 0.0 0 0 ? S< 2010 4:24 [kjournald] root 976 0.0 0.0 0 0 ? S< 2010 0:00 [kauditd] postfix 990 0.0 0.0 54208 2284 ? S 21:19 0:00 pickup -l -t fifo -u root 1013 0.0 0.0 12676 8 ? S<s 2010 0:00 /sbin/udevd -d root 1326 0.0 0.0 90900 3400 ? Ss 14:53 0:00 sshd: root@notty root 1410 0.0 0.0 53972 2108 ? Ss 14:53 0:00 /usr/libexec/openssh/sftp-server root 2690 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/0] root 2691 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/1] root 2692 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/2] root 2693 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/3] root 2694 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/4] root 2695 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/5] root 2696 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/6] root 2697 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/7] root 2698 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/8] root 2699 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/9] root 2700 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/10] root 2701 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/11] root 2702 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/12] root 2703 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/13] root 2704 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/14] root 2705 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/15] root 2706 0.0 0.0 0 0 ? S< 2010 0:00 [kmpath_handlerd] root 2755 0.0 0.0 0 0 ? S< 2010 4:35 [kjournald] root 2757 0.0 0.0 0 0 ? S< 2010 3:38 [kjournald] root 2759 0.0 0.0 0 0 ? S< 2010 4:10 [kjournald] root 2761 0.0 0.0 0 0 ? S< 2010 4:26 [kjournald] root 2763 0.0 0.0 0 0 ? S< 2010 3:15 [kjournald] root 2765 0.0 0.0 0 0 ? S< 2010 3:04 [kjournald] root 2767 0.0 0.0 0 0 ? S< 2010 3:02 [kjournald] root 2769 0.0 0.0 0 0 ? S< 2010 2:58 [kjournald] root 2771 0.0 0.0 0 0 ? S< 2010 0:00 [kjournald] root 3340 0.0 0.0 5908 356 ? Ss 2010 2:48 syslogd -m 0 root 3343 0.0 0.0 3804 212 ? Ss 2010 0:03 klogd -x root 3430 0.0 0.0 0 0 ? S< 2010 0:50 [kondemand/0] root 3431 0.0 0.0 0 0 ? S< 2010 0:54 [kondemand/1] root 3432 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/2] root 3433 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/3] root 3434 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/4] root 3435 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/5] root 3436 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/6] root 3437 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/7] root 3438 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/8] root 3439 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/9] root 3440 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/10] root 3441 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/11] root 3442 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/12] root 3443 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/13] root 3444 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/14] root 3445 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/15] root 3461 0.0 0.0 10760 284 ? Ss 2010 3:44 irqbalance rpc 3481 0.0 0.0 8052 4 ? Ss 2010 0:00 portmap root 3526 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/0] root 3527 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/1] root 3528 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/2] root 3529 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/3] root 3530 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/4] root 3531 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/5] root 3532 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/6] root 3533 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/7] root 3534 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/8] root 3535 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/9] root 3536 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/10] root 3537 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/11] root 3538 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/12] root 3539 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/13] root 3540 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/14] root 3541 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/15] root 3563 0.0 0.0 10160 8 ? Ss 2010 0:00 rpc.statd root 3595 0.0 0.0 55180 4 ? Ss 2010 0:00 rpc.idmapd dbus 3618 0.0 0.0 21256 28 ? Ss 2010 0:00 dbus-daemon --system root 3649 0.2 0.4 563084 18796 ? S<sl 2010 179:03 mfsmount /mnt/mfs -o rw,mfsmaster=web1.ovs.local root 3702 0.0 0.0 3800 8 ? Ss 2010 0:00 /usr/sbin/acpid 68 3715 0.0 0.0 31312 816 ? Ss 2010 3:14 hald root 3716 0.0 0.0 21692 28 ? S 2010 0:00 hald-runner 68 3726 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 68 3730 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-keyboard: listening on /dev/input/event0 root 3773 0.0 0.0 62608 332 ? Ss 2010 0:00 /usr/sbin/sshd ganglia 3786 0.0 0.0 24704 988 ? Ss 2010 14:26 /usr/sbin/gmond root 3843 0.0 0.0 54144 300 ? Ss 2010 1:49 /usr/libexec/postfix/master postfix 3855 0.0 0.0 54860 1060 ? S 2010 0:22 qmgr -l -t fifo -u root 3877 0.0 0.0 74828 708 ? Ss 2010 1:15 crond root 3891 1.4 1.9 326960 77704 ? S<l 2010 896:59 mfschunkserver root 4122 0.0 0.0 18732 176 ? Ss 2010 0:10 /usr/sbin/atd root 4193 0.0 0.8 129180 35984 ? Ssl 2010 11:04 /usr/bin/ruby /usr/sbin/puppetd root 4223 0.0 0.0 18416 172 ? S 2010 0:10 /usr/sbin/smartd -q never root 4227 0.0 0.0 3792 8 tty1 Ss+ 2010 0:00 /sbin/mingetty tty1 root 4230 0.0 0.0 3792 8 tty2 Ss+ 2010 0:00 /sbin/mingetty tty2 root 4231 0.0 0.0 3792 8 tty3 Ss+ 2010 0:00 /sbin/mingetty tty3 root 4233 0.0 0.0 3792 8 tty4 Ss+ 2010 0:00 /sbin/mingetty tty4 root 4234 0.0 0.0 3792 8 tty5 Ss+ 2010 0:00 /sbin/mingetty tty5 root 4236 0.0 0.0 3792 8 tty6 Ss+ 2010 0:00 /sbin/mingetty tty6 root 5596 0.0 0.0 19368 20 ? Ss 2010 0:00 DarwinStreamingServer qtss 5597 0.8 0.9 166572 37408 ? Sl 2010 523:02 DarwinStreamingServer root 8714 0.0 0.0 0 0 ? S Jan31 0:33 [pdflush] root 9914 0.0 0.0 65612 968 pts/1 R+ 21:49 0:00 ps aux root 10765 0.0 0.0 76792 1080 ? Ss Jan24 0:58 SCREEN root 10766 0.0 0.0 66212 872 pts/3 Ss Jan24 0:00 /bin/bash root 11833 0.0 0.0 63852 1060 pts/3 S+ 17:17 0:00 /bin/sh ./launch.sh root 11834 437 42.9 4126884 1733348 pts/3 Sl+ 17:17 1190:50 /usr/bin/java -Xms128m -Xmx512m -XX:+UseConcMarkSweepGC -jar /JavaCore/JavaCore.jar root 13127 4.7 1.1 110564 46876 ? Ssl 17:18 12:55 /JavaCore/fetcher.bin root 19392 0.0 0.0 90108 3336 ? Rs 20:35 0:00 sshd: root@pts/1 root 19401 0.0 0.0 66216 1640 pts/1 Ss 20:35 0:00 -bash root 20567 0.0 0.0 90108 412 ? Ss Jan16 1:58 sshd: root@pts/0 root 20569 0.0 0.0 66084 912 pts/0 Ss Jan16 0:00 -bash root 21053 0.0 0.0 63856 28 ? S Jan30 0:00 /bin/sh /usr/bin/WowzaMediaServerd /usr/local/WowzaMediaServer/bin/setenv.sh /var/run/WowzaM root 21054 2.9 10.3 2252652 418468 ? Sl Jan30 314:25 java -Xmx1200M -server -Djava.net.preferIPv4Stack=true -Dcom.sun.management.jmxremote=true - root 21915 0.0 0.0 0 0 ? S Feb01 0:00 [pdflush] root 29996 0.0 0.0 76524 1004 pts/0 S+ 14:41 0:00 screen -x Any idea what could this be, or where I should look for more diagnostic information? Thanks.

  Read the article

• How to change image through click - javascript

  - by Elmir Kouliev

  I have a toolbar that has 5 table cells. The first cell looks clear, and the other 4 have a shade over them. I want to make it so that clicking on the table cell will also change the image so that the shade will also change in respect to the current table cell that is selected. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <title>X?B?RL?R V? HADIS?L?R</title> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <link rel="stylesheet" href="N&SAz.css" /> <link rel="shortcut icon" href="../../Images/favicon.ico" /> <script type="text/javascript"> var switchTo5x = true; </script> <script type="text/javascript" src="http://w.sharethis.com/button/buttons.js"></script> <script type="text/javascript"> stLight.options({ publisher: "581d0c30-ee9d-4c94-9b6f-a55e8ae3f4ae" }); </script> <script src="../../jquery-1.7.2.min.js" type="text/javascript"> </script> <script type="text/javascript"> $(document).ready(function () { $(".fade").css("display", "none"); $(".fade").fadeIn(20); $("a.transition").click(function (event) { event.preventDefault(); linkLocation = this.href; $("body").fadeOut(500, redirectPage); }); function redirectPage() { window.location = linkLocation; } }); $(document).ready(function () { $('.preview').hide(); $('#link_1').click(function () { $('#latest_story_preview1').hide(); $('#latest_story_preview2').hide(); $('#latest_story_preview3').hide(); $('#latest_story_preview4').hide(); $('#latest_story_main').fadeIn(800); }); $('#link_2').click(function () { $('#latest_story_main').hide(); $('#latest_story_preview2').hide(); $('#latest_story_preview3').hide(); $('#latest_story_preview4').hide(); $('#latest_story_preview1').fadeIn(800); }); $('#link_3').click(function () { $('#latest_story_main').hide(); $('#latest_story_preview1').hide(); $('#latest_story_preview3').hide(); $('#latest_story_preview4').hide(); $('#latest_story_preview2').fadeIn(800); }); $('#link_4').click(function () { $('#latest_story_main').hide(); $('#latest_story_preview1').hide(); $('#latest_story_preview2').hide(); $('#latest_story_preview4').hide(); $('#latest_story_preview3').fadeIn(800); }); $('#link_5').click(function () { $('#latest_story_main').hide(); $('#latest_story_preview1').hide(); $('#latest_story_preview2').hide(); $('#latest_story_preview3').hide(); $('#latest_story_preview4').fadeIn(800); }); $(".fade").css("display", "none"); $(".fade").fadeIn(1200); $("a.transition").click(function (event) { event.preventDefault(); linkLocation = this.href; $("body").fadeOut(500, redirectPage); }); }); </script> </head> <body id="body" style="background-color:#FFF;" onload="document"> <div style="margin:0px auto;width:1000px;" id="all_content"> <div id="top_content" style="background-color:transparent;"> <ul id="translation_list"> <li> <a href=""> AZ </a> </li> <li> <a href="#"> RUS </a> </li> <li> <a href="#"> ENG </a> </li> </ul> <div id="share_buttons"> <span class='st_facebook' displayText='' title="Facebook"></span> <span class='st_twitter' displayText='' title="Twitter"></span> <span class='st_linkedin' displayText='' title="Linkedin"></span> <span class='st_googleplus' displayText='' title="Google +"></span> <span class='st_email' displayText='' title="Email"></span> </div> <img src="../../Images/RasulGuliyev.png" width="330" height="80" id="top_logo"> <br /> <br /> <div class="fade" id="navigation"> <ul> <font face="Verdana, Geneva, sans-serif"> <li> <a href="../../index.html"> ANA S?HIF? </a> </li> <li> <a href="../biographyAZ.html"> BIOQRAFIYA </a> </li> <li style="background-color:#9C1A35;"> <a href="#"> X?B?RL?R V? HADIS?L?R </a> </li> <li> <a> PROQRAM </a> </li> <li> <a> SEÇICIL?R </a> </li> <li> <a> ?LAQ?L?R</a> </li> </font> </ul> </div> <font face="Tahoma, Geneva, sans-serif"> <br /> <div id="navigation2"> <ul> <a> <li><i> HADIS?L?R </i></li> </a> <a> <li><i>VIDEOLAR</i> </li> </a> </ul> </div> <div id="news_section" style="background-color:#FFF;"> <h3 style="font-weight:100; font-size:22px; font-style:normal; color:#7C7C7C;">Son X?b?rl?r</h3> <div class="fade" id="Latest-Stories"> <table id="stories-preview" width="330" height="598" border="0" cellpadding="0" cellspacing="0"> <tr> <td> <a id="link_1" href="#"><img src="../../Images/N&EImages/images/Article-Nav-Bar1_01.gif" width="330" height="114" alt=""></a> </td> </tr> <tr> <td> <a id="link_2" href="#"> <img src="../../Images/N&EImages/images/Article-Nav-Bar1_02.gif" width="330" height="109" alt=""> </a> </td> </tr> <tr> <td> <a id="link_3" href="#"> <img src="../../Images/N&EImages/images/Article-Nav-Bar1_03.gif" width="330" height="132" alt=""></a> </td> </tr> <tr> <td> <a id="link_4" href="#"><img src="../../Images/N&EImages/images/Article-Nav-Bar1_04.gif" width="330" height="124" alt=""></a> </td> </tr> <tr> <td> <a id="link_5" href="#"><img src="../../Images/N&EImages/images/Article-Nav-Bar1_05.gif" width="330" height="119" alt=""></a> </td> </tr> </table> <div class="fade" id="latest_story_main"> <!--START--> <img src="../../Images/N&EImages/GuliyevFace.jpeg" style="padding:4px; margin-top:6px; border-style:groove; border-width:thin; margin-left:90px;" /> <a href="#"> <h2 style="font-weight:100; font-style:normal;"> "Bizim V?zif?miz Az?rbaycan Xalqinin T?zyiq? M?ruz Qalmamasini T?min Etm?kdir" </h2> </a> <h5 style="font-weight:100; font-size:12px; color:#888; opacity:.9;"> <img src="../../Images/ClockImage.png" />IYUN 19, 2012 BY RASUL GULIYEV - R?SUL QULIYEV</h5> <p style="font-size:14px; font-style:normal;">ACP-nin v? Müqavim?t H?r?katinin lideri, eks-spiker R?sul Quliyev "Yeni Müsavat"a müsahib? verib. O, son vaxtlar ACP-d? bas ver?n kadr d?yisiklikl?ri, bar?sind? dolasan söz-söhb?tl?r v? dig?r m?s?l?l?r? aydinliq g?tirib. Müsahib?ni t?qdim edirik. – Az?rbaycanda siyasi günd?mi ?hat? ed?n m?s?l?l?rd?n biri d? Sülh?ddin ?kb?rin ACP-y? s?dr g?tirilm?sidir. Ideya v? t?s?bbüs kimin idi? – ?vv?ll?r d? qeyd <a href="#"> [...]</a> </p> <!--FIRST STORY END --> </div> <div class="preview" id="latest_story_preview1"> <!--START--> <img src="../../Images/N&EImages/GuliyevFace2.jpeg" style="padding:4px; margin-top:6px; border-style:groove; border-width:thin; margin-left:90px;" /> <a href="#"> <h2 style="font-weight:100; font-style:normal;"> "S?xsiyy?ti Alçaldilan Insanlarin Qisasi Amansiz Olur" </h2></a> <h5 style="font-weight:100; font-size:12px; color:#888; opacity:.9;"> <img src="../../Images/ClockImage.png" />IYUN 12, 2012 BY RASUL GULIYEV - R?SUL QULIYEV</h5> <p style="font-size:14px; font-style:normal;">R?sul Quliyev: "Az?rbaycanda müxalif?tin görün?n f?aliyy?ti ?halinin hökum?td?n naraziliq potensialini ifad? etmir" Eks-spiker Avropa görüsl?rinin yekunlarini s?rh etdi ACP lideri R?sul Quliyevin Avropa görüsl?ri basa çatib. S?f?rin yekunlari bar?d? R?sul Quliyev eksklüziv olaraq "Yeni Müsavat"a açiqlama verib. Norveçd? keçiril?n görüsl?rd? Açiq C?miyy?t v? Liberal Demokrat partiyalarinin s?drl?ri Sülh?ddin ?kb?r, Fuad ?liyev v? Müqavim?t H?r?kati Avropa <a href="#"> [...]</a> </p> <!--SECOND STORY END --> </div> <div class="preview" id="latest_story_preview2"> <!--START--> <img src="../../Images/N&EImages/GuliyevFace3.jpeg" style="padding:4px; margin-top:6px; border-style:groove; border-width:thin; margin-left:90px;" /> <a href="#"> <h2 style="font-weight:100; font-style:normal;"> R?sul Quliyevin Iyunun 4, 2012-ci ild? Bryusseld?ki Görüsl?rl? ?laq?dar Çixisi </h2></a> <h5 style="font-weight:100; font-size:12px; color:#888; opacity:.9;"> <img src="../../Images/ClockImage.png" />IYUN 4, 2012 BY RASUL GULIYEV - R?SUL QULIYEV</h5> <p style="font-size:14px; font-style:normal;">Brüssel görüsl?ri – Az?rbaycanda xalqin malini ogurlayan korrupsioner Höküm?t liderl?rinin xarici banklarda olan qara pullari v? ?mlaklarinin dondurulmasina çox qalmayib. Camaatin hüquqlarini pozan polis, prokuratura v? m?hk?m? isçil?rin? v? onlarin r?hb?rl?rin? viza m?hdudiyy?tl?ri qoymaqda reallasacaq. R?sul Quliyevin Iyunun 4, 2012-ci ild? Bryusseld?ki Görüsl?rl? ?laq?dar Çixisi Rasul Guliyev's Speech on June 4, 2012 about Brussels Meetings <a href="#">[...]</a> </p> <!--THIRD STORY END --> </div> <div class="preview" id="latest_story_preview3"> <!--START--> <img src="../../Images/N&EImages/GuliyevGroup1.jpeg" style="padding:4px; margin-top:6px; border-style:groove; border-width:thin; margin-left:90px;" /> <a href="#"> <h2 style="font-weight:100; font-style:normal;"> R?sul Quliyevin Avropa Parlamentind? v? Hakimiyy?t Qurumlarinda Görüsl?ri Baslamisdir </h2></a> <h5 style="font-weight:100; font-size:12px; color:#888; opacity:.9;"> <img src="../../Images/ClockImage.png" />MAY 31, 2012 BY RASUL GULIYEV - R?SUL QULIYEV</h5> <p style="font-size:14px; font-style:normal;">Aciq C?miyy?t Partiyasinin lideri, eks-spiker R?sul Quliyev Avropa Parlamentind? görüsl?rini davam etdirir. Bu haqda "Yeni Müsavat"a R.Quliyev özü m?lumat verib. O bildirib ki, görüsl?rd? Liberal Demokrat Partiyasinin s?dri Fuad ?liyev v? R.Quliyevin Skandinaviya ölk?l?ri üzr? müsaviri Rauf K?rimov da istirak edirl?r. Eks-spiker deyib ki, bu görüsl?r 2013-cü ild? keçiril?c?k prezident seçkil?rind? saxtalasdirmanin qarsisini almaq planinin [...]</p> <!--FOURTH STORY END --> </div> <div class="preview" id="latest_story_preview4"> <!--START--> <img src="../../Images/N&EImages/GuliyevGroup2.jpeg" style="padding:4px; margin-top:6px; border-style:groove; border-width:thin; margin-left:90px;" /> <a href="#"> <h2 style="font-weight:100; font-style:normal;"> Norveçin Oslo S?h?rind? Parlament Üzvl?ri il? v? Xarici Isl?r Nazirliyind? Görüsl?r </h2></a> <h5 style="font-weight:100; font-size:12px; color:#888; opacity:.9;"> <img src="../../Images/ClockImage.png" />MAY 30, 2012 BY RASUL GULIYEV - R?SUL QULIYEV</h5> <p style="font-size:14px; font-style:normal;">R?sul Quliyev Norveçin Oslo s?h?rind? Parlament üzvl?ri v? Xarici isl?r nazirliyind? görüsl?r keçirmisdir. Bu görüsl?rd? Az?rbaycandan Liberal Demokrat Partiyasinin s?dri Fuad ?liyev, Avro-Atlantik Surasinin s?dri Sülh?ddin ?kb?r v? Milli Müqavim?t H?r?katinin Skandinaviya ölk?l?ri üzr? nümay?nd?si Rauf K?rimov istirak etmisdir. Siyasil?r ilk ?vv?l mayin 22-d? Norveç Parlamentinin Avropa Surasinda t?msil ed?n nümay?nd? hey?tinin üzvül?ri Karin S. [...]</a> </p> <!--FIFTH STORY END --> </div> <hr /> </div> <!--LATEST STORIES --> <div class="fade" id="article-section"> <h3 style="font-weight:100; font-size:22px; font-style:normal; color:#7C7C7C;">Çecin X?b?rl?r</h3> <div class="older-article"> <img src="../../Images/N&EImages/GuliyevGroup2.jpeg" style="padding:4px; margin-top:6px; border-style:groove; border-width:thin; margin-left:90px;" /> <a href="#"> <h2 style="font-weight:100; font-style:normal;"> Norveçin Oslo S?h?rind? Parlament Üzvl?ri il? v? Xarici Isl?r Nazirliyind? Görüsl?r </h2></a> <h5 style="font-weight:100; font-size:12px; color:#888; opacity:.9;"> <img src="../../Images/ClockImage.png" />MAY 30, 2012 BY RASUL GULIYEV - R?SUL QULIYEV</h5> <p style="font-size:14px; font-style:normal;">R?sul Quliyev Norveçin Oslo s?h?rind? Parlament üzvl?ri v? Xarici isl?r nazirliyind? görüsl?r keçirmisdir. Bu görüsl?rd? Az?rbaycandan Liberal Demokrat Partiyasinin s?dri Fuad ?liyev, Avro-Atlantik Surasinin s?dri Sülh?ddin ?kb?r v? Milli Müqavim?t H?r?katinin Skandinaviya ölk?l?ri üzr? nümay?nd?si Rauf K?rimov istirak etmisdir. Siyasil?r ilk ?vv?l mayin 22-d? Norveç Parlamentinin Avropa Surasinda t?msil ed?n nümay?nd? hey?tinin üzvül?ri Karin S. [...]</a> </p> </div> <hr /> </div> <!--NEWS SECTION--> </font> <h3 class="fade" id="footer">Rasul Guliyev 2012</h3> </div> </body> </head> </html>

  Read the article

< Previous Page | 24 25 26 27 28 29  | Next Page >