Search Results

Search found 9273 results on 371 pages for 'boot repair'.

Page 280/371 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >

• PXE E52 proxyDHCP offers were received. No DHCP offers were received

  - by TonyP

  Have a Lenovo laptop which i'm trying to capture an image from as a test (we are moving from HP as our std laptop) and i keep getting the PXE E52 error when trying to boot from LAN. With things exactly as they are all the previous HP models are connecting ok. I'm at a loss as to what to test, as its working for the HP kit and don't want to break that. Note: DHCP server and WDS server are two separate boxes but on same scope, VLAN, etc. and the DHCP lease is not full.

  Read the article

• RAID 5 RECONSTRUCT with RAID Reconstructor

  - by user22914

  I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software called "GetDataBack" from here http://www.runtime.org/data-recovery-software.htm but the problem that not all data recovered, I am still looking for importants data with about 5 GB size. I have another software called "RAID Reconstructor" from "http://www.runtime.org/raid.htm" I thought if I run it to reconstruct that will help to recover more data and put the third drive to be Online but I am afraid that might erase the current data in the other drives. Please I need your advise in how I could retrive the remaining data? Thanks

  Read the article

• Access Denied using TakeOwn.exe

  - by Magnus

  I have got this file that I can't delete. It happened after a system crash, so the CHKDSK kicked in upon next reboot. After that, I can't delete the file. THis is on Windows Home Server, and the file is one of those hidden Thumbs.db, and my WHS reports a "File conflict" on the file, the reason: Access Denied" What I have tried so far, running as an Administrator: Delete: Access Denied TakeOwn.exe : Access Denied Attrib.exe -s -h : Access Denied Icacls.exe : Access Denied Re-boot in to safe mode and tried the above: Access Denied I have used the CHKDSK /f again, rebooted since some suggestions is that the file has been corrupted, but that didn't change anything. Any suggestions ?

  Read the article

• “BAD” partition showing up in Partition Manager

  - by Quintin Par

  I tried to partition my primary hard disk (NTFS partitions) with qtparted and got stuck in the process. Consequently I had to kill the process and exit my knoppix live CD boot up. Even though I was expecting XP to get corrupted, it booted fine and showed up all the drives accessible. But when I opened this with partition manager 8, it shows up as “BAD”. I ran chkdsk /f without any success. My objective with qparted and partition magic was to resize my existing partitions and add some space to c: How do I fix this problem and resize my partitions? Edit: Here's how my primary drive as per windows is

  Read the article

• Getting VMWare ESXi 5.0.0 with RAID using the Intel X79 chipset to work

  - by Deleted

  I have bought a new server where I use the motherboard ASUS P9X79 WS X79 S-2011 ATX. It will be used for virtualization, preferably using VMware vSphere Hypervisor™ (ESXi) if I can get the RAID on my motherboard working with VMWare (it does not detect it). The motherboard has the Intel® X79 chipset, which for RAID controller means vendor ID 8086 (Intel) and model ID 2826. When I boot the ESXi 5.0.0 installation media from my flash drive I can not see drives in the RAID5 set I created. Questions: Is there a VIB file for the RAID controller I can use? I have found one article at http://www.intel.com/support/motherboards/server/sb/CS-033313.htm on getting RAID to work with some Intel controllers, it lists 9 integrated RAID modules it is comptabile with. However, there is no mention of the X79 chipset.

  Read the article

• Ubuntu hibernate resume fails: "PM: Resume from disk failed"

  - by Neil

  I just upgraded to Ubuntu 10.4 from 9.10, and it's now hiding the hibernate and suspend options. How do I get them back? So the way you do this is make sure that your swap partition is in /etc/fstab and swap is enabled, and big enough. Look at /proc/swaps to see if anything is listed. Now I'm getting this error when I boot after suspending: init: ureadahead-other main process (705) terminated with status 4 Does anyone know how to fix this? I'm using Ubuntu with kernel 2.6.32-22-generic.

  Read the article

• windows firewall broken on server 2008

  - by Chloraphil

  This evening I tried to rdp into my server 2008 box and was unable to. After poking around some I discovered that something is awry with my Windows Firewall. I did install 5 windows updates remotely earlier today but rolled those back in an attempt to see if that fixed the problem but had no luck. Symptoms: cannot rdp to machine (including from itself) cannot ping machine cannot connect to file share on machine error message when attempting to open "windows firewall with advanced security" snap-in (there was an error opening the windows firewall with advanced security snap-in ... The Windows Firewall with Advanced Security snap-in failed to load. Restart the windows firewall service on the computer that you are managing. Error code: 0x6D9. When I opened the "user-friendly" Windows Firewall it failed to load most of the gui elements, meaning, the title bar with close, minimize, and maximize buttons is present, the rest of the window has a white background with a yellow rectangle with rounded corners and a yellow triangle w/ an exclamation point is in the upper right. hope that made sense "Windows Firewall" does not appear in the list of services I ran a virus scan that found nothing. How do I fix the firewall and hopefully restore the ability to rdp? EDIT: Added at fission's request: c:\sc query mpsdrv SERVICE_NAME: mpsdrv TYPE : 1 KERNEL_DRIVER STATE : 4 RUNNING (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 c:\sc query mpssvc SERVICE_NAME: mpssvc TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED WIN32_EXIT_CODE : 1068 (0x42c) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 Those two registry keys do exist: HKLM\SYSTEM\CurrentControlSet\Services\mpsdrv & HKLM\SYSTEM\CurrentControlSet\Services\MpsSvc ! The problem seems to be with the Base Filtering Engine, when I try to start it I get the following error: Windows could not start the Base Filtering Engine service on MYCOMPUTER. Error 15100: The resource loader failed to find MUI file. EDIT2: I ran sfc /scannow and i found about 100 occurrences of "[SR] Cannot repair member file"... including several related to the firewall (ex: [l:32{16}]"Firewall.cpl.mui" of Networking-MPSSVC.Resources...). One of them mentioned wordpad.exe, which I tried to open, and it failed. I found here mentions of mounting the install.wim on the install media to copy the affected files over. I am downloading the appropriate AIK and will continue tomorrow evening.

  Read the article

• How to create persistent static route on Mac OS X 10.6?

  - by kopobamypa

  I need to add static route on MAC OS. I found good description here Permanent Static Route Mac Os X 10.4.0 and followed the Roark Holz's (roarkh) solution. Now my problem: sometimes this solution works, sometimes does not. When it doesn't work I see these messages after boot in the Console Messages log: 06.05.10 9:34:13 com.apple.launchd[1] *** launchd[1] has started up. *** 06.05.10 9:34:46 com.apple.SystemStarter[30] Adding Static Route to 10.152 06.05.10 9:34:46 com.apple.SystemStarter[30] route: writing to routing socket: Network is unreachable 06.05.10 9:34:46 com.apple.SystemStarter[30] add net 10.152.0.0: gateway 192.168.1.234: Network is unreachable I want to know what is going on. How this kind of problem can be troubleshooted?

  Read the article

• kernel panic with exitcode=0x00000004 and no call trace

  - by litmusconfig

  A bit of background first - I'm trying to configure a MicroBlaze Linux (big-endian version) system on a Xilinx ML506 eval board. The goal is to use the second partition of a CompactFlash card attached to the Xilinx SystemACE controller. So far, root in initramfs works and after boot, I can mount and use said partition, no problem. But if I try to use it right from the getgo with the "root=/dev/xsa2" kernel command line parameter, the system hangs with [...] Freeing unused kernel memory: 143k freed Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 And that's it - no regdump, no call trace, no further nothing from the serial console, even though kernel has been configured with debugging enabled. Now, I'm pretty new at this, so is there something else I should be doing to see something more informative from the kernel?

  Read the article

• Move smaller hard drive to partition on a larger hard drive

  - by bluejeansummer

  My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu. I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot. Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority. In case it helps, both drives use 2.5" PATA, and I have a 1 TB external drive available if it's needed.

  Read the article

• runit - unable to open supervise/ok: file does not exist

  - by Alexandr Kurilin

  I'm trying to figure out why runit will not boot or give me the status for the managed applications. Running on Ubuntu 12.04. I created /service, /etc/sv/myapp (with a run script, a config file, a log folder and a run script inside of it). I create a symlink from /service/ to /etc/sv/myapp When I run sudo sv s /service/* I get the following error message: warning: /service/myapp: unable to open supervice/ok: file does not exist Some of my Googling revealed that supposedly rebooting the svscan service might fix this, but killing it and running svscanboot didn't make a difference. Any suggestions? Am I missing a step here somewhere?

  Read the article

• Cannot install Windows 7 on new PC (BSOD during installation)

  - by andronz

  Yesterday I had received new hardware and tried to assemble all of it. But when I was installing Windows 7 x64 for two times I got a BSOD, and a error message like this: Your PC has rebooted unexpectly, installation will continue after reboot. I have checked everything and tried to install once more time. It was almost successful, Windows had installed, but I cannot format my disk, open cmd or control panel, boot from DVD etc. It's the first time I have assembled a PC, and I don't know where the problem is, in my hardware or in Windows. My components: MSI z77a-g43 Intel i5 3570k Seagate Barracuda (plug into sata3 slot 6 Gb, there I have also sata 3 Gb slot) Corsair XMS3 (4x4Gb) HIS IceQ Also in the BIOS, I have changed RAM frequency to DDR3 1600 and voltage to 1.65v

  Read the article

• Fixing windows MBR without Vista Recovery CD

  - by Aditya Sehgal

  I had Windows Vista + Ubuntu running on my system. I deleted the ubuntu partitions from Windows. However, when I start the system, GRUB throws up an Error 22 (missing partition) and does not let me boot into Windows. The CD ROM on my laptop is fried and therefore I tried installing Ubuntu again using a USB install. However, the version Ubuntu 9.10 justs hangs in the load screen and does nothing. I do not have windows Vista Recovery CD (as it was a recovery partition in my laptop). What are the options I have? How do I fix this?

  Read the article

• Fixing windows MBR without Vista Recovery CD

  - by Aditya Sehgal

  I had Windows Vista + Ubuntu running on my system. I deleted the ubuntu partitions from Windows. However, when I start the system, GRUB throws up an Error 22 (missing partition) and does not let me boot into Windows. The CD ROM on my laptop is fried and therefore I tried installing Ubuntu again using a USB install. However, the version Ubuntu 9.10 justs hangs in the load screen and does nothing. I do not have windows Vista Recovery CD (as it was a recovery partition in my laptop). What are the options I have? How do I fix this?

  Read the article

• Reconfigure RAID on Dell PowerEdge T710

  - by Stefano Borini

  I have a Dell PowerEdge T710 under my feet at this very moment, with RedHat Enterprise Server 5.3. I have 6 1TB disks and two 500GB. parted reports two devices, one 500 GB and the other 4 TB. So I assume the RAID has been setup as mirror for two disks, and I assume as RAID 5 the remaining ones. I say "I assume" because it does not make sense. Having 6 disks in RAID 5, I should obtain a total space of 5 TB, not 4TB. It's not even RAID 10: I would end up with a 3 TB unit. How can I check and eventually modify the RAID array definition? In the Fujitsu Siemens I played with some time ago, at boot I had the chance to enter the controller BIOS, but here I don't see a clear way to perform this operation.

  Read the article

• lsattr: Inappropriate ioctl for device While reading flags

  - by rchhe

  For one of our Linux servers running CentOS 6.0, if I do lsattr /home, I get something like this (as root): $lsattr /home lsattr: Inappropriate ioctl for device While reading flags on /home/user lsattr: Inappropriate ioctl for device While reading flags on /home/user lsattr: Inappropriate ioctl for device While reading flags on /home/DIR Now, I try to change something with chattr $chattr -R -i /home chattr: Inappropriate ioctl for device while reading flags on /home Mount returns: $mount /dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sda3 on /boot type ext3 (rw) tmpfs on /dev/shm type tmpfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) nfsd on /proc/fs/nfsd type nfsd (rw) I have no clue how to fix this. Could somebody help?

  Read the article

• OS X not booting after upgrading LibXML2

  - by Federico

  I tried upgrading the version of LibXML2 in my machine to run some propietary software. Compiled as 32-bit (-arch i386) and restarted to see if it worked. Now when I try to boot I can only get into the spinning screen and it just sits there. Restarting in verbose mode (Cmd-V) does not show any error in the process, it just freezes after "AppleIntelCPUPowerManagement: initialization complete". I can't from any CD either (if I press c on startup it just spins the disk around and then stops in the same spinner screen). I've also reset the PRAM/NVRAM to discard any problems with that and it´s still not fixed. Any pointers of what might´ve gone wrong? (Latest gen MBP, running 10.6.3)

  Read the article

• How easy is it to migrate a Linux VM image from one VM env to another?

  - by T.J. Crowder

  If I stick to one of the standard, well-supported VM disk images (like a raw image, or VDI, VMDK, ...), are Linux VMs typically easy to move between VM environments? E.g., between (say) VirtualBox and KVM, or VMWare and Xen? I'm talking here of fully virtualized environments, not paravirtualization requiring support within the guest OS. It seems to me that the kernels in most Linux distributions these days are configured to...keep an open mind and detect things at boot time, so you don't have the issue that you sometimes have moving a Windows VM from one virtualization system to another (I'm thinking particularly of HAL issues that Windows has, like ACPI vs. non-ACPI; I've also just had Windows VMs generally acting strangely when moved from VMWare to VirtualBox, for instance). I'm looking for a general answer, but if it helps, specifically I'm mostly going to be doing this with Ubuntu 8.04 LTS and 10.04 LTS guests. But that could change.

  Read the article

• Why does my ReadyNas 4200 have a constant beep post disk failure

  - by swagner88

  Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

  Read the article

• Can't re-install OS on Asus Eee PC 1018P

  - by cornerback84

  My friend has an Asus Eee PC 1018P. It has no CD/DVD drive (neither does he have a USB CD/DVD drive). The OS wasn't working fine, so we decided to restore the system using the provided OS backup from HD. But mid way through the installation it was interrupted and the computer was restarted (not a hardware or software issue – we did it). Now we cannot run the backup and we also tried to install Windows 7 through USB, but as soon as we start to install the OS, it says that some device driver is missing. It turns out that the OS needs a USB device driver to continue. It has USB 3.0 – maybe that's why the OS needs the driver. I tried disabling 3.0 and enabling 2.0 but then it does not boot from USB drive for some reason. We are stuck with this. The backup doesn't run and when booting from USB, it says that it needs a device driver. Anyone has any idea what we could do?

  Read the article

• SATA-II motherboard and drives but only connected at SATA-I

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which has a SATA-II controller. Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA. Both SSD and HDD are SATA-II and the optical drives are SATA-I. I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA-I (1.5 Gbps), not SATA-II (3.0 Gbps). I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA-II? I'm running Windows 7 Ultimate.

  Read the article

• Hard drive device names are different from one reboot to another in Ubuntu.

  - by Mike

  I have an Ubuntu machine (10.04 but had the same problem in 8.04) with a bunch of drives that I use as a file server. 1 SATA that I boot off of. 2 IDE that in RAID1 and 2 SATA in RAID1. The problem is the drives that I have in RAID1 change device names on reboot. This is a problem because the in my mdadm.conf a reference to /dev/sda1, for example, might not work the next time I reboot because /dev/sda1 could be a disk from another array. Any help getting around this would be appreciated. -Mike

  Read the article

• Hard drive device names are different from one reboot to another in Ubuntu.

  - by Mike

  I have an Ubuntu machine (10.04 but had the same problem in 8.04) with a bunch of drives that I use as a file server. 1 SATA that I boot off of. 2 IDE that in RAID1 and 2 SATA in RAID1. The problem is the drives that I have in RAID1 change device names on reboot. This is a problem because the in my mdadm.conf a reference to /dev/sda1, for example, might not work the next time I reboot because /dev/sda1 could be a disk from another array. Any help getting around this would be appreciated. -Mike

  Read the article

• HP Recovery options: System Recovery not showing

  - by sha404

  I am using HP Pavilion dv4 notebook. Previously, there were following options in Recovery Manager(using f11 during boot): +System Recovery +Factory Restore +Minimized Image Recovery The System Recovery option allows me to restore only Operating system drive e.g. C:\ drive, keeping all other user (me) created hard drives intact. I made a set of recovery disk. Since then I don't see the System Recovery option in HP Recovery Manager. But all other options are still there. But when I use recovery disks that i created earlier, that option e.g. System Recovery is shown. But It's really boring and time consuming to use disks for recovery. So, what's the problem with internal HP Recovery Manager? Why isn't it showing that option?

  Read the article

• "Input not Supported" on external monitor

  - by Shalan

  when it rains, it pours! Im helping a friend with his Dell Inspiron 1520. The hdd crashed and and top of that, the screen is cracked. I've replaced the hdd (SATA-5400), but the lcd replacement is only comin in a months time. I've tried to: hook the laptop up to an Acer 18.5" lcd monitor via VGA, boot up into Windows 7 installer, get to the Step-1 screen, Switch to external display (Function-F8) ...and get the "Input not supported" message on the Acer lcd. I know that this is a resolution problem, but cant for the life of me figure out how to solve this. I've also tried, hooking it up to my TV via Composite cables (got a VGA-Composite adaptor). Please could someone advise me what to do? -Thank u!

  Read the article

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >