Search Results

Search found 17621 results on 705 pages for 'just my correct opinion'.

Page 280/705 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >

• What does "link to unknown" mean?

  - by Question Overflow

  I just upgraded my server to Fedora 17 which made a switch of my bootloader from GRUB Legacy to GRUB2. There are two symbolic links in the /etc folder that points to the files grub.conf and grub.cfg in /boot/grub and /boot/grub2 respectively. Though the targets seem correct, the link icons are displaying an X status which seems to indicate that the links are broken. Upon right-clicking the property type, it states "link to unknown". The file size of the link corresponds exactly with the file size of the target file, so, why does the links appear to be broken? The image of the link icons: As requested, the following are the outputs from the commands: $ ls -l /etc/grub.conf lrwxrwxrwx. 1 root root 22 Jul 14 2011 /etc/grub.conf -> ../boot/grub/grub.conf $ ls -l /etc/grub2.cfg lrwxrwxrwx. 1 root root 22 Dec 10 18:57 /etc/grub2.cfg -> ../boot/grub2/grub.cfg

  Read the article

• How to Grant IIS 7.5 access to a certificate in certificate store?

  - by thames

  In Windows 2003 it was simple to do and one could use the winhttpcertcfg.exe (download) to give "NETWORK SERVICE" account access to a certificate. I'm now using Windows Server 2008 R2 with IIS 7.5 and I am unable to find where and how to set permissions access permissions to a certificate in the certificate store. This Post showed how to do it in Vista and that winhttpcertcfg features were added into the certificates mmc however it doesn't seem to work with imported certificates or doesn't work anymore on Server 2008 R2. So does anyone have any idea on how give IIS 7.5 the correct permissions to read a certificate from the certificate store? And also what account from IIS 7.5 that needs the permission.

  Read the article

• nginx 500 error instead of 404

  - by arby

  I have the following nginx configuration (at /etc/nginx/sites-available/default) server { listen 80; ## listen for ipv4; this line is default and implied listen [::]:80 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.php index.html index.htm; server_name _; location / { try_files $uri $uri/ /index.html; } error_page 404 /404.html; location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } location ~ /\.ht { deny all; } } Instead of a 404 error, I'm getting 500 server errors on broken urls. How can I correct this?

  Read the article

• OSSEC agent behind NAT

  - by Eric

  I am working on an OSSEC deployment where I will have multiple agents behind 1 public IP. Below is an example of the setup Private Network OSSEC-Agent1 (192.168.1.10) OSSEC-Agent2 (192.168.50.33) OSSEC-Agent3 (10.10.10.1) Those IPs NAT to 1 public IP (1.1.1.1) Then 1.1.1.1 talks to the public OSSEC server on 2.2.2.2 I've read some OSSEC documentation talking about NAT here, but it doesn't tell me exactly what I need to know. Their example is using an entire /24 subnet and mine will mainly have multiple agents to only 1 public IP. With the setup so far, I brought Agent1 online fine and it is communicating to the OSSEC server. However Agent2 continues to fail trying to connect to 2.2.2.2. Even though when I added the key, I had the correct name for it, so I know it talked to the portal at least once for that information. I'm assuming it's just getting confused with the multiple keys to 1 public IP. I basically want to know if this is possible and/or if I'm just overlooking something simple. Any help would be greatly appreciated.

  Read the article

• security issue of Linux sudo command?

  - by George2

  Hello everyone, 1. I am using Red Hat Enterprise 5 Linux box. I find if a user is in /etc/sudoers file, then if the user run command with sudo, the user will run this command with root privilege (without knowing root password, the user runs sudo only need to input the user's own password in order to run a command with sudo). Is that correct understanding? 2. If yes, then is it a security hole? Since users other than root could run with root privilege? thanks in advance, George

  Read the article

• Win 7 move ssd from SATA 1 to SATA 0, drive letter from G: to C:

  - by GaryH

  I got a new SSD, plugged it in on my notebook to the available SATA 1 connector and installed Win7 (Ultimate) on it as drive G:. It is working great. Now I would like to move the SSD to the SATA 0 connector and change the drive letter to C:. The existing 500gb HD that has another copy of Win7 (home) on it I will format and connect to the SATA 1 connector as the G: or some other letter drive. Is this possible? Is there software that will go through the registry and "correct" all of the entries for "G:" for everything installed and fix it all up? Or am I better off biting the bullet and setting the hardware where I want it and doing a fresh install of everything? Thanx, G

  Read the article

• Focus on Oracle Data Profiling and Data Quality 11g - 24/Fev/11

  - by Claudia Costa

  Thursday 24th February, 11am GMTOracle offers an integrated suite Data Quality software architected to discover and correct today's data quality problems and establish a platform prepared for tomorrow's yet unknown data challenges.Oracle Data Profiling provides data investigation, discovery, and profiling in support of quality, migration, integration, stewardship, and governance initiatives. It includes a broad range of features that expand upon basic profiling, including automated monitoring, business-rule validation, and trend analysis.Oracle Data Quality for Data Integrator provides cleansing, standardization, matching, address validation, location enrichment, and linking functions for global customer data and operational business data.It ensures that data adheres to established standards that are adaptable to fit each organization's specific needs. Both single - and double - byte data are processed in local languages to provide a unique and centralized view of customers, products and services.  During this in-person briefing, Data Integration Solution Specialists will be providing a technical overview and a walkthrough.Agenda Oracle Data Integration Strategy overview A focus on Oracle Data Profiling and Oracle Data Quality for Data Integrator: Oracle Data Profiling Oracle Data Quality for Data Integrator Live demo Q&A  This FREE online LIVE eSeminar will be delivered over the Web and Conference Call. Registrations received less than 24hours prior to start time may not receive confirmation to attend.To register click here.For any questions please contact [email protected]

  Read the article

• How can I block w3schools from appearing in my google search results?

  - by zzzzBov

  A while ago I got fed up with continuously finding w3schools in my search results when I wanted detailed, technically correct information. To fix this without having to continuously append -site:w3schools.com to my search queries, I used google's Manage Blocked Sites page. For a while this worked perfectly, no more results from unwanted sites. Recently, however, I've been seeing w3schools litter my search results. Is there a new way to remove a site from google search results? -or- Is this just a bug that I should report?

  Read the article

• Two Network Adapters on Hyper-V Host - Best way to configure?

  - by GoNorthWest

  Hi, I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

  Read the article

• Promoting Organizational Visibility for SOA and SOA Governance Initiatives – Part I by Manuel Rosa and André Sampaio

  - by JuergenKress

  The costs of technology assets can become significant and the need to centralize, monitor and control the contribution of each technology asset becomes a paramount responsibility for many organizations. Through the implementation of various mechanisms, it is possible to obtain a holistic vision and develop synergies between different assets, empowering their re-utilization and analyzing the impact on the organization caused by IT changes. When the SOA domain is considered, the issue of governance should therefore always come into play. Although SOA governance is mandatory to achieve any measure of SOA success, its value still passes incognito in most organizations, mostly due to the lack of visibility and the detached view of the SOA initiatives. There are a number of problems that jeopardize the visibility of these initiatives: Understanding and measuring the value of SOA governance and its contribution – SOA governance tools are too technical and isolated from other systems. They are inadequate for anyone outside of the domain (Business Analyst, Project Managers, or even some Enterprise Architects), and are especially harsh at the CxO level. Lack of information exchange with the business, other operational areas and project management – It is not only a matter of lack of dialog but also the question of using a common vocabulary (textual or graphic) that is adequate for all the stakeholders. We need to generate information that can be useful for a wider scope of stakeholders like Business and enterprise architectures. In this article we describe how an organization can leverage from the existing best practices, and with the help of adequate exploration and communication tools, achieve and maintain the level of quality and visibility that is required for SOA and SOA governance initiatives. Introduction Understanding and implementing effective SOA governance has become a corporate imperative in order to ensure coherence and the attainment of the basic objectives of SOA initiatives: develop the correct services control costs and risks bound to the development process reduce time-to-market Read the full article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: SOA Governance,Link Consulting,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• forward ssh ports on EC2

  - by Will Glass

  I have an SSH server on a private subnet within an EC2 vpc listening for ssh on port 9022 I also have a nat instance (standard Amazon EC2 nat) on a public instance. I would like to forward incoming SSH connections (port 9022) to my nat to the internal server (port 9022). I tried this, but it didn't work: sudo iptables -t nat -I PREROUTING -p tcp -i eth0 --dport 9022 -j DNAT --to-destination 10.0.2.11:9022 I verified that 10.0.2.11 is listening on port 9022. (I can telnet). I verified my security group allows incoming port 9022. I verified that /proc/sys/net/ipv4/ip_forward is 1. What am I missing? Edit: Turns out this was correct after all. I had a mistake in my security group.

  Read the article

• SQL Server Windows Auth Login not working

  - by Mr Shoubs

  I've had someone set up a domain controller on windows 2008 on one server, and sql server 2008 on another. The domain seems to be working fine, I'm logged on as a domain user on both servers, nothing seems to be a problem there. However, when I try to add a domain user/group to SQL Server Security (e.g. clicking ok from the create login screen) it says it can't find it (even though I've used the search to find the correct account in the first place), when I try to logon (even though I haven't added it yet) it says something about the account being part of an untrusted domain instead of saying I don't have permission to log on. Anyone have any ideas on what is set up incorrectly?

  Read the article

• How to open a VirtualBox (.VDI) Virtual Machine

  - by [email protected]

   How to open a .VDI Virtual MachineSometimes someone share with us one Virtual machine with extension .VDI, after that we can wonder how and what with?Well the answer is... It is a VirtualBox - Virtual Machine. If you have not downloaded it you can do this easily, just follow this post.http://listeningoracle.blogspot.com/2010/04/que-es-virtualbox.htmlorhttp://oracleoforacle.wordpress.com/2010/04/14/ques-es-virtualbox/Ok, Now with VirtualBox Installed open it and proceed with the following:1. Open the Virtual File Manager. 2. Click on Actions ? Add and select the .VDI fileClick "Ok"3.  A new Virtual machine will be displayed, (in this Case, an OEL5 32GB Virtual Machine is available.)4. This step is important. Once you have open the settings, under General option click the advanced settings. Here you must change the default directory to save your Snapshots; my recommendation set it to the same directory where the .Vdi file is. Otherwise you can have the same Virtual Machine and its snapshots in different paths.5. Now Click on System, and proceed to assign the correct memory and define the processors for the Virtual machine. Note: Enable  "Enable IO APIC" if you are planning to assign more than one CPU to the Virtual Machine.6. Associated the storage disk to the Virtual machineThe disk must be selected as IDE Primary Master. 7. Well you can verify the other options, but with these changes you will be able to start the VM. Note: Sometime the VM owner may share some instructions, if so follow his instructions.8. Click Ok and Push Start Button, and enjoy your Virtual Machine

  Read the article

• How to open a VirtualBox (.VDI) Virtual Machine

  - by [email protected]

   How to open a .VDI Virtual MachineSometimes someone share with us one Virtual machine with extension .VDI, after that we can wonder how and what with?Well the answer is... It is a VirtualBox - Virtual Machine. If you have not downloaded it you can do this easily, just follow this post.http://listeningoracle.blogspot.com/2010/04/que-es-virtualbox.htmlorhttp://oracleoforacle.wordpress.com/2010/04/14/ques-es-virtualbox/Ok, Now with VirtualBox Installed open it and proceed with the following:1. Open the Virtual File Manager. 2. Click on Actions ? Add and select the .VDI fileClick "Ok"3.  A new Virtual machine will be displayed, (in this Case, an OEL5 32GB Virtual Machine is available.)4. This step is important. Once you have open the settings, under General option click the advanced settings. Here you must change the default directory to save your Snapshots; my recommendation set it to the same directory where the .Vdi file is. Otherwise you can have the same Virtual Machine and its snapshots in different paths.5. Now Click on System, and proceed to assign the correct memory and define the processors for the Virtual machine. Note: Enable  "Enable IO APIC" if you are planning to assign more than one CPU to the Virtual Machine.6. Associated the storage disk to the Virtual machineThe disk must be selected as IDE Primary Master. 7. Well you can verify the other options, but with these changes you will be able to start the VM. Note: Sometime the VM owner may share some instructions, if so follow his instructions.8. Click Ok and Push Start Button, and enjoy your Virtual Machine

  Read the article

• Why isn't sox able to convert to mp3?

  - by marue

  I installed Sox, i installed lame-398, but sox is not able to convert any file to mp3. It fails with the messages: ./../sox FAIL util: Unable to load LAME encoder library (libmp3lame). ./../sox FAIL formats: can't open output file `funktech.mp3': How can i check if lame has been installed correct? How can i get sox to find the mp3Library? edit: I did not install sox at all, it works without installing directly from the commandline. Lame was installed by following the instructions on their site: ./configure make make install which results in the following files being found in /usr/local/lib/ : libmp3lame.dylib, libmp3lame.la, libmp3lame.a Maybe symlinking libmp3lame.la, which is marked as executable, to /usr/bin would help?

  Read the article

• Connect iPad to windows 7 VPN

  - by Linuz

  My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

  Read the article

• Cannot set MemOpMode or ProcVirtualization with syscfg.exe

  - by EGr

  When attempting to set MemOpMode or ProcVirtualization with syscfg.exe, I get the following error: C:\Users\EGr>syscfg --MemOpMode=AdvEccMode System Services or CSIOR disabled In the past, I have been told that this can be resolved by forcefully reinstalling the Dell Lifecycle controller firmware, and then trying again; however, I cannot find my notes on how to do that. Has anyone ever run into this issue, and does anyone know how I can fix it? If it is possible to forcefully reinstall the firmware, how would I do that? I've tried running the installer, but it fails after running for ~2 min. I believe there is a way to fix this as well, by adding/modifying a registry value at HKLM\System\Control\CurrentControlSet\Services\IPMIDRV (that might not be the correct path, but I know it is IPMIDRV). Is this a common issue? What is the actual cause of it?

  Read the article

• Wacom Bamboo CTH460L issues

  - by Robert Smith

  I recently bought a Wacom Bamboo Pen & Touch CTH460L. I installed doctormo's PPA, however, the pen functionality didn't work and the touch was very glitchy (when I touched it, it immediately double clicked and began to drag elements in the screen). I tried to configure it using the wacom-utility package in the Synaptic Package Manager (version 1.21-1) but that didn't work either. Then I followed this post (#621, written by aaaalex), and after some problems trying to restart Ubuntu (graphics related problems), the pen works fine (it could be better, though) but the touch functionality doesn't work anymore. Currently I have installed xserver-xorg-input-wacom (1:0.10.11-0ubuntu7), wacom-dkms (0.8.10.2-1ubuntu1) and wacom-utility. The Wacom Utility only displays an "options" field under "Wacom BambooPT 2FG 4X5" but no other option to configure it. What is the correct way to get this tablet working on Ubuntu 10.04?. By the way, currently I can't start Ubuntu properly when the tablet is connected (in that case, Ubuntu start in low graphics mode). I need to connect it later. UPDATE: I uninstalled xserver -xorg-input-wacom, and wacom-utility because one of them prevented Ubuntu to start normally. I only re-installed wacom-dkms 0.8.10.2-1ubuntu1. The pen is working but no touch functionality. The side buttons don't work either. Thanks in advance.

  Read the article

• HP-UX - custom rsync path

  - by stack_zen

  Hi. There are a range of HP-UX 11.11 hosts I'm unable to install rsync (I'm limited to a non-privileged user) I've extracted both rsync binary and libpopt.sl, libiconv.sl, libintl.sl from the depots into one of that user's directories: /home/zenith/rsync/ Problem is, I can't get my RH Linux box communicating with it: rsync -e --rsync-path=/home/zenith/rsync/rsync --compress=9 -pgtov --filter=+rs_/'*.log' --exclude='*' [email protected]:/home/zenith/service/logs/ /u01/rsync_depot/service/192.102.14.18/ /usr/lib/dld.sl: Can't find path for shared library: libintl.sl /usr/lib/dld.sl: No such file or directory sh: 1644 Abort(coredump) I've added to the remote host .profile export SHLIB_PATH=/usr/lib:/home/zenith/rsync export PATH=$PATH:/home/zenith/rsync but still, no libintl.sl is found. How can I initialize the correct env variable/ get this to work?

  Read the article

• arp problems with transparent bridge on linux

  - by Mink

  I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

  Read the article

• Is an Ethernet point to point connection without a switch real time capable?

  - by funksoulbrother

  In automation and control, it is commonly stated that ethernet can't be used as a bus because it is not real time capable due to packet collisions. If important control packets collide, they often can't keep the hard real time conditions needed for control. But what if I have a single point to point connection with Ethernet, no switch in between? To be more precise, I have an FPGA board with a giga-Ethernet port that is connected directly to my control PC. I think the benefits of giga Ethernet over CAN or USB for a p2p connection are huge, especially for high sampling rates and lots of data generation on the FPGA board. Am I correct that with a point to point connection there can't be any packet collisions and therefore a real time environment is given even with ethernet? Thanks in advance! ~fsb

  Read the article

• Redircting to a url that has a question mark in it?

  - by dkmojo

  I have a somewhat strange problem. A client has moved their site to Wordpress. They use a service for link exchanges that has a Wordpress plugin. The issue is that the new links pages use a query string to display the correct content and I cannot figure out how to redirect the old URLs correctly. Old URLs look like this: domain.com/link/category-name.html The plugin makes them look like this in WP: domain.com/links/?page=category-name.html How in the world can I get the redirect to work properly? Here's what I have tried: Redirect 301 /link/actors.html http://www.artisticimages.biz/links/?page=actors.html Redirect 301 /link/actors.html http://www.artisticimages.biz/links/%3Fpage=actors.html Redirect 301 /link/actors.html http://www.artisticimages.biz/links/\?page=actors.html But none of those have worked. Any help is greatly appreciated!

  Read the article

• Forcing logon to Air Watch server upon joining wifi

  - by DKNUCKLES

  I'm setting up a wireless controller that I would like to leave as unsecured. When a user connects to this network they need to be forwarded to a specific page where they can authenticate with the Air Watch system they have in place. Once authentication takes place, a profile will be downloaded to their device and we can administer the devices accordingly. I'm mulling over how I can force the page to the user when they log in. The methodology I'm thinking about working with is creating a NAT rule for that VSC that would forward all port 80 and 443 traffic to the airwatch server. Once they authenticate, a profile will be downloaded which will connect the devices to an Virtual Access Point who's SSID isn't broadcasted. Is this methodology correct or can someone think of an easier / more efficient way of accomplishing this? The controller is an HP MSM720 for what it's worth.

  Read the article

• www.foobar.com works but foobar.com results in a 'Server not found' error

  - by Homunculus Reticulli

  I have just setup a minimal (hopefully secure? - comments welcome) apache website using the following configuration file: <VirtualHost *:80> ServerName foobar.com ServerAlias www.foobar.com ServerAdmin [email protected] DocumentRoot /path/to/websites/foobar/web DirectoryIndex index.php # CustomLog with format nickname LogFormat "%h %l %u %t \"%r\" %>s %b" common CustomLog "|/usr/bin/cronolog /var/log/apache2/%Y%m.foobar.access.log" common LogLevel notice ErrorLog "|/usr/bin/cronolog /var/log/apache2/%Y%m.foobar.errors.log" <Directory /> AllowOverride None Order Deny,Allow Deny from all </Directory> <Directory /path/to/websites/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I am able to access the website by using www.foobar.com, however when I type foobar.com, I get the error 'Server not found' - why is this? My second question concerns the security implications of the directive: <Directory /path/to/websites/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> in the configuration above. What exactly is it doing, and is it necessary?. From my (admitedly limited) understanding of Apache configuration files, this means that anyone will be able to access (write to?) the /path/to/websites/ folder. Is my understanding correct? - and if yes, how is this not a security risk?

  Read the article

• Boot xen server through ipxe

  - by Ghassen Telmoudi

  I'm want install Xen Server 6.2 though ipxe, I tried different configurations, no luck making to work until now. I found some may example to boot from pxe using TFTP server, and here is an example: default xenserver-auto label xenserver-auto kernel mboot.c32 append xenserver/xen.gz dom0_max_vcpus=1-2 dom0_mem=752M,max:752M com1=115200,8n1 console=com1,vga --- xenserver/vmlinuz xencons=hvc console=hvc0 console=tty0 answerfile=http://[pxehost]/answerfile.xml remotelog=[SYSLOG] install --- xenserver/install.img The problem is that ipxe uses different syntax, I could not figure out how to convert this configuration to work on ipxe. Here is my ipxe file so far: #!ipxe echo "XEN Server is booting up" initrd http://server-ip/pxe/xen/boot/xen.gz kernel http://server-ip/pxe/xen/boot/pxelinux/mboot.c32 boot Can any one supply the correct configuration?

  Read the article

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >