Search Results

Search found 10810 results on 433 pages for 'port forwarding'.

Page 281/433 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• Numlock on when computer is off

  - by George Duckett

  I have a desktop PC which was recently moved. Since moving I've noticed that even while the PC is turned off (but wall socket turned on) the NumLock LED on the keyboard is on. It may have been doing this before the move, but I've only noticed it now. Maybe it matters that the keyboard is connected via a shared mouse/keyboard PS/2 port and I'm running Windows 7. I've not checked whether the LEDs are just keeping whatever state they were in when I turned the PC off but will do this if that information could be relevant. Why does the led stay on when the PC is turned off and how can I prevent this?

  Read the article

• Can't communicate using PuTTY, but can with Termite

  - by SharpHawk

  I'm trying to establish a serial connection to a peripheral from my PC's RS-232 port. Pretty simple stuff, and I've had not trouble doing it with countless peripherals before. And yet when I configure PuTTY to the right baud rate, stop bits, etc. I'll type in "*IDN?", press enter, and the unit won't reply. After going over my settings over and over again, I decided to try another terminal program, Termite. This time it worked like a charm. What puzzles me, and what I'm trying to figure out by posting this question, is why Termite would work when PuTTY did not despite the fact that they both have the same settings. PuTTY: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Termite: http://www.compuphase.com/software_termite.htm EDIT: I now tried Tera Term as well, and it works. So PuTTY is the odd one out.

  Read the article

• How to recreate Windows Live Mail filter rules in Thunderbird?

  - by FernandoSBS

  I have some filters in Windows Live Mail that I'm trying to port to thunderbird without success. It seems Thunderbird filter is very limited. Here is an ex of a filter i'm trying to recreate: Apply this rule after the message arrives Where the From line contains '[email protected]' or '[email protected]' or 'Programa TAM Fidelidade' and Where the message body contains 'esteja visualizando' and 'por ser cadastrado no Programa TAM Fidelidade' Move it to the Deleted items folder and Stop processing more rules In Thunderbird I can´t combine a list of "or"s with some "and"s, because it only allows you to select "message matches ALL of the criteria below" or "ANY of the below". Am I missing something or it really is very limited?

  Read the article

• nginx: php-fastcgi running but php files not executing

  - by Daniel

  I have recently set up a nginx server with PHP running as FastCGI process. The server is running with HTML files however PHP files are downloading instead of displaying and PHP code is not processed. This is what I have in nginx.conf: server { listen 80; server_name pubserver; location ~ \.php$ { root /usr/share/nginx/html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script_name; include fastcgi_params; } } The command netstat -tulpn | grep :9000 displays the following which indicates php-fastcgi is running and listening on port 9000: tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 2663/php-cgi If it's if any importance my server is running on CentOS 6 and I installed nginx and PHP using the repositories from The Fedora Project.

  Read the article

• SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

  - by V M

  After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

  Read the article

• how to connect with ssh when it's hanging

  - by Eduardo Bezerra

  I'm trying to ssh into a remote machine, but it hangs when looking for an identity file: [username@local .ssh]$ ssh -v remote uname OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /home/username/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to remote [192.168.3.36] port 22. debug1: Connection established. debug1: identity file /home/username/.ssh/identity type -1 debug1: identity file /home/username/.ssh/id_rsa type -1 debug1: identity file /home/username/.ssh/id_dsa type -1 I can ping the machine normally, and it's obviously working with the sshd service running... I just don't know how to log into it. In fact, I'd just like to reboot it. That'd be fine. Thing is: it's across the ocean (I'm in the US, and the machine is in Europe). I'd run some hundreds of java threads at the same time and apparently that was too much for the host. How can I get back in?

  Read the article

• failing to achive tunneling to fresh ubuntu 10.04 server

  - by user65297

  I've just set up a new 10.04 server and can't get the tunneling to work. local machine > ssh -L 9090:localhost:9090 [email protected] login success, but thereafter trying tunnel from local browser, http://127.0.0.1:9090 echo at server terminal: channel 3: open failed: connect failed: Connection refused auth.log sshd[24502]: error: connect_to localhost port 9090: failed. iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Trying 9090 at server (links http://xx.xxx.xx.xx:9090 works) sshd_config is identical to previous 8.04 server, working fine. What's going on? Thankful for any input. Regards, //t

  Read the article

• smtp sasl authentication failure

  - by cromestant

  hello, I have configured and fixed almost all the problems with my postfix +courier + mysql setup for virtual mailboxes. I can now receive mail and send it from webmail (squirrel). BUT, what I can't do is authenticate from outside client. Since my isp blocks port 25 I setup postfix to work on 1025 for smtp and setup verbose loging. Here is the verbose log of a failed authentication process LOG Authentication for imap and pop3 seem to be working but this one is not. Here is the postconf -n output. Also through mysql I can verify that it is trying to validate through the system, running a query that returns the encrypted password stored in the database. I can't seem to find the error for this. thank you in advance

  Read the article

• Connection to mysql server in SYN_SENT

  - by Sunil

  We are facing a strange problem from last few days between our application server and database server(Mysql): connection to database server from application server hangs in SYN_SENT state and after that we are not able to make any connection to database server on mysql port(3306). When we checked the netstat output on database server its in SYN_RECV state. What I can figure out is mysql server is receiving the SYN request and responding also and its not reaching to the client hence SYN_RECV at server side and SYN_SENT at client side. I think SYN_SENT state should go after some time and because of this other db connection attempts to same server should not hang. Does anybody have any idea how can we resolve this issue? Out setup details : Application server: RHEL 5.4, kernel-release = 2.6.18-164.el5, x86_64 Database server: Mysql Version : 5.1.49 RHEL 5.4, kernel-release = 2.6.18-164.el5, x86_64

  Read the article

• Disabling URL decoding in nginx proxy

  - by Tomasz Nurkiewicz

  When I browse to this URL: http://localhost:8080/foo/%5B-%5D server (nc -l 8080) receives it as-is: GET /foo/%5B-%5D HTTP/1.1 However when I proxy this application via nginx: location /foo { proxy_pass http://localhost:8080/foo; } The same request routed through nginx port is forwarded with path decoded: GET /foo/[-] HTTP/1.1 Decoded square brackets in the GET path are causing the errors in the target server (HTTP Status 400 - Illegal character in path...) as they arrive un-escaped. Is there a way to disable URL decoding or encode it back so that the target server gets the exact same path when routed through nginx? Some clever URL rewrite rule?

  Read the article

• How to create a virtual input in windows from an audio stream

  - by Brian

  Great to find this forum full of knowledge. I was wondering if anyone knew of an application or other work around to create a virtual input device in windows. I have a IP cam app on my android phone, that I would like to use for skype webcam. It comes with a port for getting the video feed into skype, and that works great. However, the only audio available, is a OGG stream. Both video and audio work great with media players such as VLC etc, but ot with skype, since skype only works with windows input devices. Is there such software outthere, in which I could simply name my audio stream address, and pipe that to a virtual input device to allow skype to find it?

  Read the article

• What tangible security are gained by blocking all but a few outgoing ports in a firewall

  - by Frankie Dintino

  Our current hardware firewall allows for blocking incoming and outgoing ports. We have two possibilities: Block certain troublesome ports (unsecured smtp, bittorrent, etc.) Block all but a few approved ports (http, https, ssh, imap-ssl, etc.) I see several downsides with option 2. Occasionally web servers are hosted on non-standard ports and we would have to deal with the resulting issues. Also, there is nothing preventing a malicious or unwanted service from being hosted on port 80, for instance. What are are the upsides?

  Read the article

• datacenter network change control best practices

  - by jpolache

  I have been tasked with compiling a list of possible network equipment changes at a data center. The task includes tagging which changes need change control and which don't. Does anyone know of a "best practices" list that I can start from? The methods for doing change control at this data center are well established. The list would be of specific configuration items that should or should not be included in the change control process, of example; static route entries switch port assignments firewall rule additions/changes etc.

  Read the article

• Why does NX Client for Windows silently closes after connection?

  - by pavel

  Hey! I connect remotely to my Ubuntu server from Vista machine. Now I need to run a GUI application on the server (Wireshark). So I decided to use FreeNX server/client to view Ubuntu GUI on Vista I have successfully installed FreeNX on Ubuntu and NX Client on Vista. I was following this guide Unfortunately, now I found myself stuck with the following problem. At the client, the !M logo window appears, but after a few seconds that window just closes, even without showing any error message. Guys, I'm really stuck, please help! Maybe I should have installed some graphical environment on the server? These are the details from NX client, it seems there are no errors. ----------------- Info: Display running with pid '7768' and handler '0x670d24'. NXPROXY - Version 3.4.0 Copyright (C) 2001, 2007 NoMachine. See http://www.nomachine.com/ for more information. Info: Proxy running in client mode with pid '2168'. Session: Starting session at 'Sat Dec 19 10:58:35 2009'. Warning: Connected to remote version 3.3.0 with local version 3.4.0. Info: Connection with remote proxy completed. Info: Using WAN link parameters 768/24/1/0. Info: Using cache parameters 4/4096KB/16384KB/16384KB. Info: Using pack method 'adaptive-9' with session 'kde'. Info: Using ZLIB data compression 1/1/32. Info: Using ZLIB stream compression 1/1. Info: No suitable cache file found. Info: Forwarding X11 connections to display ':0'. Info: Listening to font server connections on port '11000'. Session: Session started at 'Sat Dec 19 10:58:35 2009'. Info: Established X server connection. Info: Using shared memory parameters 0/0K. Session: Terminating session at 'Sat Dec 19 10:58:37 2009'. Session: Session terminated at 'Sat Dec 19 10:58:37 2009'. -----------

  Read the article

• 2 x Netgear GS724T (Dual GBIC) trunking issue

  - by Arthor

  I have the following: Netgear GS724T (Firmware Version V1.0.3_35, Protocol Version - 2.001.002) 4 x Indineon ISFP GBR/FC Settings STP Function - Enabled Fast Link - Enabled Trunking port 23,24, (21,22 - RJ45 cables, but not connected.) I have connected both switches via 2 fiber cables and want to use trunking. The problem I am having. Sometimes I get a an issue when none of the switches cannot talk with each other, nor the devices, sometime they can. The problem is irregular and no patten can be determined The statistics shows that when the switches does not work, they have RX errors If I remove one to the GBIC connections, then everything works as normal.] Question Does anyone have a solution for this please? Thanks

  Read the article

• IPTables masquerading with one NIC

  - by Tuinslak

  Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

  Read the article

• Cannot access Network Shares on Windows Server 2008 running VisualSVN Server

  - by mwillmott

  I have installed VisualSVN server on Windows Server 2008. The server is part of a domain but not the domain controller, it is just a data server and now an SVN server. VisualSVN uses port 80 and can only be access from inside the network (i do i by going to the dns name of the server). However, ever since i have installed this, other computers on the network can no longer access the shared folders on the server EXCEPT the domain controller which has no problems accessing the shares. I am stumped, i am guessing it is something to do with Apache running and not using host-headers (or whatever the Apache equivalent may be) but just being bound to the servers DNS name or IP. Any suggestions?

  Read the article

• send outgoing email via postfix from mail client

  - by Ey Jay

  I have installed postfix on my ubuntu that is hosted on digitalocean. What I want to do is. With my smtp server setup, I want to use it to send mail from my email client. I don't need to receive, I just need to send. I can telnet example.com 25 successfully, I received the email in my inbox, but when I tried using in a email client. smtp: example.com:25 user: smtp1user password: smtp1userpassword I get an error that says "Server doesn't respond. Try changing the port." I dont know how to proceed.

  Read the article

• IP camera's multicast/RTSP conflicting with 2.4GHz Wi-Fi?

  - by jayson

  Here at our business we have a Netgear R7000 running DD-WRT. I have been slowly adding IP cameras which I run using Blue Iris software. The last camera I bought (which is NOT a wireless camera), when I plug it into the network I start having really bad connection issues on the 2.4GHz Wi-Fi network. The 5GHz works fine, just the 2.4GHz all of the sudden has trouble connecting, as if it's conflicting. I've tried playing with the camera settings, different IP addresses, HTTP ports, etc, and discovered it to be a conflict with multicast. When multicast is checked, the Wi-Fi has issues but my video streams via Blue Iris. When unchecked, Wi-Fi works fine but the video won't stream through Blue Iris. The problem is there are no settings in the camera to change the RTSP port, which is set to 34567. Does anyone know something that could fix this issue? It all seems very strange to me but maybe someone has an idea?

  Read the article

• Weird behaviour with OpenVPN: can not connect to a few websites

  - by Gaby Solis

  My OpenVPN server is Ubuntu 10.04.4 LTS and openvpn version is 2.x My client is on Win 7. He can access most sites but not Youtube, Facebook, Twitter, groups.google.com, etc My server.conf is: local x.x.x.x port 1194 proto udp dev tun ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status /etc/openvpn/keys/openvpn-status.log verb 4 I can access Youtube etc using SSH Tunnel + SOCKS Proxy, and the Ubuntu server can access all sites. so nothing is wrong with the Ubuntu server. With little information I can provide, I am not looking for a quck solution. How can I debug?

  Read the article

• 10 gigabit or 1 gigabit switch

  - by Guntis

  We are planning to move mysql to dedicated box. At this moment we have web servers and mysql is running on each. Question is: cheaper is to buy 10G switch and put 10G network card into mysql server. Or buy normal gigabit switch and connect mysql box to switch with multiple network cables. In 1G scenario then we give each web server different mysql IP address. I don't think, that mysql box with one 1G link is enough to to satisfy multiple web box mysql traffic. At this moment we have 3 servers witch are running mysql/web. Plan is to add fourth server for mysql only. Thanks. Edit: if we buy 1G switch with mini-GBIC ports. Can we put in mini-GBIC 10G connectors and then connect mysql box to that port?

  Read the article

• meld on OS X 10.7 doesn't work?

  - by klm123

  I'm installing meld on Mac OS 10.7 using port. It has downloaded all dependencies and told that everything is ok: Staging meld into destroot Installing meld @1.5.3_0 Activating meld @1.5.3_0 Cleaning meld Updating database of binaries: 100.0% Scanning binaries for linking errors: 100.0% No broken files found. but when I run: [18:28:24]~$ meld Traceback (most recent call last): File "/opt/local/bin/meld", line 75, in <module> locale.setlocale(locale.LC_ALL,'') File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/locale.py", line 539, in setlocale return _setlocale(category, locale) locale.Error: unsupported locale setting what is the problem and how to deal with it?

  Read the article

• Set Users as chrooted for sftp, but allow user to login in SSH

  - by Eghes

  I have setup a ssh server on debian 7, to use sftp connection. I chrooted some user, with this config: Match Group sftpusers ChrootDirectory /sftp/%u ForceCommand internal-sftp But if i want login with one of this chrooted users in ssh console, they get logged, but autoclose the connection. In logs I see: Oct 17 13:39:32 xxxxxx sshd[31100]: Accepted password for yyyyyy from zzz.zzz.zzz.zzz port 7855 ssh2 Oct 17 13:39:32 xxxxxx[31100]: pam_unix(sshd:session): session opened for user yyyyyyyyyyyy by (uid=0) Oct 17 13:39:32 d00hyr-ea1 sshd[31100]: pam_unix(sshd:session): session closed for user yyyyyyyyyyyy How can I chroot a user only for sftp, and use it as a normal user for ssh?

  Read the article

• Why my Buffalo router keeps on sending rdp, netbios, ftp, http requests?

  - by user192702

  I have the following network setup: Buffalo Router (192.168.100.1) < Watchguard XTM21 (192.168.100.13) < PC For some reason I keep on seeing the following repeating on my XTM21's Traffic Monitor. While I have enabled Port Forwarding, none of the ports reported below were enabled. Can someone let me know why I'm seeing all of these? 2013-10-19 23:37:56 Deny 192.168.100.1 192.168.100.13 ftp/tcp 4013 21 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 282700472 win 5840" Traffic 2013-10-19 23:37:59 Deny 192.168.100.1 192.168.100.13 http/tcp 2459 80 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 296571237 win 5840" Traffic 2013-10-19 23:38:02 Deny 192.168.100.1 192.168.100.13 8000/tcp 3244 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 298709937 win 5840" Traffic 2013-10-19 23:38:05 Deny 192.168.100.1 192.168.100.13 8000/tcp 3244 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 298709937 win 5840" Traffic 2013-10-19 23:38:05 Deny 192.168.100.1 192.168.100.13 rdp/tcp 3896 3389 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 290482691 win 5840" Traffic 2013-10-19 23:38:08 Deny 192.168.100.1 192.168.100.13 netbios-ns/udp 2110 137 0-External Firebox Denied 78 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" Traffic 2013-10-19 23:38:32 Deny 192.168.100.1 192.168.100.13 ftp/tcp 4025 21 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 321868558 win 5840" Traffic 2013-10-19 23:38:35 Deny 192.168.100.1 192.168.100.13 http/tcp 2471 80 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 325918731 win 5840" Traffic 2013-10-19 23:38:38 Deny 192.168.100.1 192.168.100.13 8000/tcp 3256 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 327854525 win 5840" Traffic 2013-10-19 23:38:41 Deny 192.168.100.1 192.168.100.13 8000/tcp 3256 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 327854525 win 5840" Traffic 2013-10-19 23:38:41 Deny 192.168.100.1 192.168.100.13 rdp/tcp 3896 3389 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 327101423 win 5840" Traffic 2013-10-19 23:38:44 Deny 192.168.100.1 192.168.100.13 netbios-ns/udp 2110 137 0-External Firebox Denied 78 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" Traffic

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >