Search Results

Search found 10810 results on 433 pages for 'port forwarding'.

Page 284/433 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >

• PBX with Fax and Google Voice

  - by Phill Pafford

  Looking to replace/port my home number which I use for mainly faxing for my home business to a PBX server ( Thinking Asterisk or Elastix ). My question is: Does Asterisk/Elastix support Faxing ( Incoming / Outgoing ) Does Asterisk/Elastix support Google Voice Here is what I'm looking to do: Run some sort of PBX software from my own home server that will allow me to use Google Voice for my home number, possibly allow multiple Google voice ( Though I could live with just the one ) and must support Faxing ( Incoming and Outgoing ). Would Asterisk/Elastix support all of this or would you recommend something else for this? Looking to avoid some of the pitfalls that could happen I like Ubuntu if a Linux environment is needed

  Read the article

• Making internal website available publicly (Win 2008 Server)

  - by endigo

  I have an IIS 7 web site that is running on a Windows 2008 Server (64-bit) VMWare on a Windows 2008 Server (64-bit) Host on my local network. My router is a Firebox XEdge and it has port 80 directed to the IP of the server on VMWare. I can reach the web site from inside the network, but I cannot reach the site from outside the network. I have other web sites that are working through the Firebox, and I am confident that it is configured correctly. I suspect that Windows 2008 server is blocking routed or public addresses, but I have shut down the firewall on the Server that is running on VMWare and the AVG Anti-virus to no avail. How can I make my site available publicly.

  Read the article

• usb device in dual mode on gentoo linux

  - by Idlecool

  i am having a flip flop usb modem which has two modes 1 usb mass storage mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fff5 ONDA Communication S.p.A. 2 usbserial mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fffe ONDA Communication S.p.A. by default whenever i plug the modem to the usb port.. the linux machine recognize it as a usb mass storage device.. how can i make it load as usbserial device i have been using a package usb_modeswitch in the past on ubuntu 10.04 but i cannt install the same package on gentoo live cd.. even udev is not installed on live cd.. how to change the product-id of the usb device on gentoo live disc without udev.

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in?

  Read the article

• Setting Redmine path

  - by David Parunakian

  Hello, How can I set the path on which Redmine should be run, e.g. example.com:3000/redmine instead of example.com:3000? There is an appropriately named option in the settings panel, but it serves a different purpose, according to the documentation and experimental observations (it is used to write URL in emails sent to users). A wider picture: I need this in order to properly serve Redmine on port 80 over Apache's mod_proxy (i.e. at example.com/redmine). The problem is that when running it on /, the home page fails to load the necessary resources (such as JavaScript and CSS files). Any workarounds?

  Read the article

• Wireless traffic stops when downloading large files at high speed: packets lost (Linksys WRT120N router)

  - by Torious

  The problem Note: First I'd like to understand WHY this is happening. Ofcourse, a solution would be nice too. :) When downloading a large file over HTTP at high-speeds, my wireless traffic basically stops: I can't open webpages and the download itself pauses. It pauses pretty much immediately after starting it; sometimes at 800 KB, sometimes at a few MB. After some time, the download (and other traffic) resumes, but the problem keeps reoccurring during the same download. The problem does not occur when using a wired connection through the same router (Linskys WRT120N). Also note that the connection is not dropped when this happens. It's just that the traffic stops and I can't browse to web pages, etc. (SYN packets are sent but nothing is received, etc.) Inspection with Wireshark shows that the following happens: Server sends data packets which are acknowledged by client Server sends a packet, but SEQ indicates some packets were lost (6 packets in one occurrence). Server sends a few more packets and client acknowledges these using "selective acknowledgement" Server stops sending data for a while (since the lost packets were not acknowledged or the router stops forwarding them?) Eventually, server does a "retransmission" and traffic resumes as normal. This all seems normal behavior to me when packet loss occurs. It's the consistent packet loss throughout a large, high-speed download that puzzles me. What might cause this? My own idea is the following: My internet is pretty fast (100 mbps), so when starting a large-file download, the router buffers the incoming data (since wireless introduces some slight delay / lower speed, in part due to other networks), but the buffer overflows and the router drops packets to regulate traffic (and because it has no choice). But how could that happen? Doesn't the TCP window size limit the amount of data that can go unacknowledged? So how can the router's buffer overflow if there can only be like 64 KB waiting to be acknowledged? Note: I've disabled TCP window scaling and dynamic window size through netsh options, in an attempt to fix this, but it doesn't seem to matter. Also, Wireshark shows a pattern of the server sending 2 packets (of 1514 bytes) and the client sending an ACK, so does that rule out a possible buffer overflow? And a few more subsequent packets are received... I'm at a loss here. Thanks for any insights. Things that are (probably) NOT the cause / I have experimented with The browser Various TCP options in Windows 7 (netsh etc.) Router settings such as MTU, beacon interval, UPnP, ...

  Read the article

• How do I run a beanshell script on my Mac?

  - by jonalv

  My Ubuntu-friend told me to testrun a Beanshell script by doing: bsh #filename# and when I told him that I don't know what bsh is nor have it he told me: sudo apt-get install bsh Being on a Mac I instead ran: sudo port install beanshell But still no bsh command available. A listing of the package content revealed a jar file named: /opt/local/share/java/bsh.jar but when I try to run that with my script file a complete Window manager written in Java starts up (and does not run the script file btw). Now, clearly I am doing something wrong, I am sure there must be a way of running beanshell scripts on a mac terminal although it does seem more natural for the linux users. What am I doing wrong and what should I do to run that script?

  Read the article

• Dell 620 display is too bright to use

  - by keith

  I have a Dell D620 with a display problem. In windows 7 the display seems to be too bright, the text is broken up, the only way to see the mouse is at a very oblique angle. Changing the brightness with fn and brightness control has little/no effect. When I put it in high contrast mode I can see all the colors, but any windows pictures etc are still useless. I cannot get it to connect to an external monitor via VGA port or via a USB-VGA connector.

  Read the article

• Configuring vsftpd with nginx on ubuntu

  - by arby

  I have vsftpd installed on Ubuntu 12.04LTS along with nginx, php, and sql on an Amazon ec2 instance. The web server is good to go, but I'm having trouble connecting to the FTP server. I'm not quite sure how to set the privileges or what configuration options I might be missing. By default, the location of the web root is at /usr/share/nginx/www and it is owned by root:root. The web server runs as user www-data in the group www-data. I've opened port 21 and set the passive ports in the ec2 backend and ufw firewall. In vsftpd.conf, I have: ... anonymous_enable=NO local_enable=YES local_umask=0027 chroot_local_user=YES pasv_enable=YES pas_max_port=12100 pasv_min_port=12000 port_enable=YES ... Now, I'm unsure how to create the FTP user that when I login, displays my web directory with write access. I've tried it a few different ways, but I keep running into errors (either no connection, no write access, or very slow timeouts.)

  Read the article

• VNC application/terminal server

  - by sebastian nielsen

  Which software should I use, if I want to set up a linux VNC terminal server that works in this way: The VNC server should be able to accept up to X simultanous connections on the same port 5900. The VNC server should use 640x480 on 8 or 16bit color. When the VNC server receives the connection, it should start a new "session" for a user, and auto-launch a specific linux application for that user. If the application is killed, crashes, or is exited in any way, user should be disconnected (kicked) from server. If the user disconnect, the application should be killed in a "graceful way", that allows the application to cleanup. (There should be no way to "pick up" a old session) Any ideas?

  Read the article

• approx via inetd is not open to connection for others machines

  - by Cédric Girard

  I have an approx server to speed up Debian apt updates, on my Ubuntu 11.04 desktop PC, it had ran fine in the past, but today le 9999 port is open from localhost, but not for others PC. I have not modified inetd configuration at all. What can I check and try? inetd.conf 9999 stream tcp nowait approx /usr/sbin/approx /usr/sbin/approx approx.com # Here are some examples of remote repository mappings. # See http://www.debian.org/mirror/list for mirror sites. debian http://ftp2.fr.debian.org/debian security http://security.debian.org/debian-security volatile http://volatile.debian.org/debian-volatile # The following are the default parameter values, so there is # no need to uncomment them unless you want a different value. # See approx.conf(5) for details. $cache /espace/Dossiers/approx $max_rate unlimited $max_redirects 5 $user approx $group approx $syslog daemon $pdiffs true $offline false $max_wait 10 $verbose false $debug false I tried to allow others PC to connect with a "ALL: ALL" in hosts.allow. ufw is disabled, iptables-save is empty.

  Read the article

• My D-Link's Ethernet bridge downlink just got 10-30x slower?

  - by Jay Levitt

  TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

  Read the article

• How to stop syslog from listening to 514 on CentOS 5.8

  - by Jim

  I have a CentOS 5.8 machine (with regular syslog) that for some reason is listening to port 514, even though it is not started with "-r" (to receive remote syslog messages). # netstat -tulpn | grep 514 udp 0 0 0.0.0.0:514 0.0.0.0:* 2698/syslogd Syslog is started with only "-m 0": ps -ef | grep syslogd root 2698 1 0 15:55 ? 00:00:00 syslogd -m 0 I have tried starting it with "-m 0 -r", just to check if there was any difference, but there is not. This machine is a client and should only log to a central log server - it should not be listening itself. What am I missing?

  Read the article

• How to Use 3 Monitors

  - by The.Anti.9

  Right now my setup has a nice big 24" flatscreen in the center, and a 19" flatscreen to the left. And a big gaping hole on the right. I have a 3rd monitor to put there, but I'm not sure how to get the computer to recognize it. Do I need a graphics card with 3 ports? Or can I span the monitors over non SLI-Linked graphics cards? Is it possible to plug my 3rd monitor into the on-board VGA port and have it work?

  Read the article

• GDM login screen is not displayed with VNC

  - by niboshi

  Hi, I set up VNC server with xinetd. Also configured GDM so that XDMCP is enabled. VNC connection seems okay, but GDM login screen is not shown. Instead I can only see old bare X screen (gray meshed background and X-shaped mouse pointer), which I can't do any interaction with it. What can I do to fix the problem? No log is written below /var/log/. Server distribution: Ubuntu marverick /etc/xinetd.d/vnc is like below: service vnc1024 { disable = no socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = -inetd -query localhost -geometry 1024x768 -depth 24 -once securitytypes=none port = 12345 } /etc/gdm/custom.conf: [daemon] [security] DisallowTCP=false [xdmcp] Enable=true [gui] [greeter] [chooser] [debug] [servers] /etc/services is also configured. Thanks

  Read the article

• dell vostro 1310 with nVidia 8400M display problem

  - by Arthur

  Hi everyone, i hope someone can help me with this problem. I have a Dell vostro 1310 Laptop with 32 bit vista and a 8400M nVidia chip. Recently i have noticed performance issues when my girlfriend was playing Sims 3, and then one day i turned it on and all i got was a thick white line at the bottom of the screen. i heard the OS start up so automatically i thought it was a damaged screen, but i had doubts so i plugged it into an external display via the vga port. it worked but everything appart worm the OS choice menu looks distorted beyond belief. even the bios screen had multicoloured lines running down the screen. The resolution is non existant, the screen only shows a 256 colour pallette and is heavily distorted. i barely managed to get to the device manager where i found the gfx card with an exclamation mark. does anybody have suggestions? should i buy a new mobo or are repairs possible? thanks in advance

  Read the article

• What settings need to be changed to allow EC2 instances to use Amazon's Route 53 for DNS?

  - by ks78

  I have a number of Amazon EC2 instances, all running Ubuntu, which I'd like to configure to use Amazon's Route 53. I setup a script, following Shlomo Swidler's article, but ran into script-related issues, which were answered here. Now, I have the script working, but my instances are still not able to access Route 53's DNS. By this I mean, they are not able to resolve hostnames to IP addresses. My instances are currently configured with the DNS server IP address Amazon pushes out to them by default, does that need to be changed when using Route 53? I'm also IP-restricting my instances using the Security Groups. Could that be the problem? Is there a certain IP address or port I should open to allow communication with Route 53? It seems that DNS requests should be originating from my instances so the Security Groups shouldn't be an issue, but I've been wrong before. If anyone has any ideas, I'd really appreciate it.

  Read the article

• How long do managed gigabit ethernet switches take to boot up?

  - by Warren P

  One critical drawback that I have found in researching managed-switches, and one that I have some past experience with is that anything with "lots" of firmware is going to have lots of issues associated with that firmware. We are in the middle of researching rackmount gigabit switches (48 port). It looks like for 48 ports, our only choice is managed switches (Dell, Cisco/Linksys,HP, etc). What I want to know, that I can not find out much about is the boot-time for various managed switches. If you own one, can you please answer with the model number, and the cold boot time in seconds. I have read online that Linksys (now Cisco) SRW series sometimes take almost 5 minutes before they are fully booted up, and that is an unacceptable cost for us. I particularly want to know about Dell PowerConnect managed switch bootup time (model 3548 and 5448), and would like to confirm the 5-minute boot time on the SRW2048 or similar model, and any HP ProCurve boot up times. The composite of all those figures ought to form an interesting overall performance picture.

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by marcipollo

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• How to Enable Ports 25 - 28 on a Cisco Catalyst 3750

  - by Jared Brown

  I am trying to enable ports 25 - 28 on my 28 port Catalyst 3750. These four ports are my fiber ports. I am using the following command to bring up that interface. interface range Gi1/0/25 - 28 That works and it dumps me in the config-if-interface prompt. This is where I get stuck. I just want to enable these four ports and have them be in VLAN1 and On just like ports 1 - 24. How do I do this?

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• Format External HD on Airport Extreme Base Station?

  - by David.Chu.ca

  I just got an Airport Extreme Base Station. I am planning to use this one replace my current Linksys router. This works fine. My another purpose of getting this device is to use its USB port to connect to several external HDs as my backup Time Machine. I can see one 500GB HD through Airport Base Station. However, I cannot format it by using Disk Utility. What I did is to connect the HD to my iMac directly first and then clean and format the disk by Disk Utility application. Then I move the HD to the Airport Base Station. After that I can designate the HD as my Time Machine destination. Is there any way to format the HD connected to Airport Base Station? Any issues to use an external HD through Airport Base Station for Time Machine backups?

  Read the article

• Juniper J4350 out of order

  - by Benjamin Baron

  I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

  Read the article

• Testing php mail() in localhost problem

  - by Samir Ghobril

  Hey guys, recently I just installed msmtp in linux and I even send a mail from the terminal and it worked: echo -e "Subject: Test Mail\r\n\r\nThis is a test mail" |msmtp --debug --from=default -t [email protected] But in php, after editing the php.ini file to have this: sendmail_path = '/usr/bin/msmtp -t' and using this piece of code: <?php if ( mail ( '[email protected]', 'Test mail from localhost', 'Working Fine.' ) ){ echo 'Mail sent'; } else{ echo 'Error. Please check error log.'; } ?> I get the Mail sent message but don't receive a message in my inbox. Not even in the spam folder. Anything wrong I'm doing? msmtp configuration file: defaults tls on tls_starttls on tls_trust_file /etc/ssl/certs/ca-certificates.crt account default host smtp.gmail.com port 587 auth on user [email protected] password password from [email protected] logfile /var/log/msmtp.log

  Read the article

• Apache configuration to accept all data

  - by ServerDown

  Hi, I have apache running on port 7979 to talk with a device that sends data to webserver and later will run php scripts to process and send reply xml. The problem now is that it sends data like POST HTTP/1.1 Content-Type:text/xml Content-Length:369 Followed by XML When apache sees this it gives a 400 error. Since the device cannot be changed is there any way to accept the full data sent from the device and write to some log? Currently apache simply keeps sending 400 errors back. If there was a way to log the entire xml or create some custom handler for 400 error then the xml could be read by a php script. Looking forward to solutions.

  Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >