Search Results

Search found 63030 results on 2522 pages for 'learning windows 7'.

Page 282/2522 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• Headphones stopped working in Windows (working fine in other OS)

  - by arnab321

  All of a sudden, my headphones stopped working with windows 8 in my laptop. Sound plays fine through built in speakers. Its not a problem with the hardware, because, I dual boot ubuntu and sound plays fine in Ubuntu. These are the things I have tried: - Restarting and blah blah. Restarted 20 times i think, alternating windows and ubuntu. - Uninstalled and reinstalled Realtek drivers. - Troubleshooting from control panel (it says "coudnt identify problem") What might be the problem?

  Read the article

• Windows 8.1 update effectively disabled mobile broadband connection

  - by natarajan

  I have Windows 8.1 on my HP laptop and a Huawei broadband modem which was working fine but since some of the updates of Windows 8.1 it is now not working. I have following issue: Under Device Manager Network Adaptor it shows the Hauwei mobile E303H but when I click on it and go to the Driver tab I can see that no device driver is installed. When I click to update the driver and select the generic mobile broadband adaptor it fails and shows "access denied". How do I go about replacing the driver for this?

  Read the article

• Windows 2008 startup script will not run?

  - by larsks

  I am trying to get a very simple batch script to run when my Windows 2008 Server (R2) system starts up. I have added the script to the "Startup Scripts" in the local group policy by running gpedit.msc, and I see the script listed under Windows Settings/Scripts (Startup/Shutdown)/Startup when I run rsop.msc, but the script is not being executed. The "Last Executed" column in rsop is empty even after a reboot, and a file that should be created by the script is never created. At the moment, the entire contents of the script are: rem Check if this script is running. date /t > c:\temp\flag The target directory (c:\temp) exists. The script is called c:\scripts\startup.bat, and works fine if I run it by hand.

  Read the article

• SSD runs faster on Windows as compared to Linux [closed]

  - by wushugene

  Windows 7 seems to install, boot and run much smoother & faster than each the three linux distros I have recently tried (Ubuntu 12.04 unity, Linux mint 13 MATE, and Fedora 17 on gnome 3.4). Why am I facing bad performance in Linux? I have tweaked my Linux installs for the SSD (enabling trim, disabling swap, etc.) I'm using an Acer TravelMate with i5-2410m processor, intel hd 3000 graphics, 8 gigs of ram, and a 256 gb samsung 830 ssd. Edit: Boot times are 10-15 seconds slower, there is noticeable delay from login to fully loaded desktop, and in general does not appear to be as responsive as my old windows 7 install or the Linux guests I had running on it.

  Read the article

• Cannot install wireless lan service on windows 2012 RTM offline

  - by user1763118

  I'm having trouble installing the wireless lan service offline with a fresh installed windows 2012 server RTM. I tried "install-windowsfeature wireless-networking" in the non-gui mode and using the server manager in the gui mode to enable the wireless lan service, but both of them show a "failure configuring windows updates" message after the installation restarted the system. I checked the event log and I think messages about "The WLAN Autoconfig service depends on the following service: nativewifip. This service might not be installed" are the source of the issue. Google shows it is a service called "native wifi filter", but I cannot find anywhere to install that service. I don't have a Ethernet adapter for that computer, so have to install everything offline before the wifi's working.

  Read the article

• Catch headset pause/play keypresses in Windows

  - by akshay2000

  I have a new Ultrabook which has single audio jack for input and output instead for separate 3.5 mm jacks we used to have on older machines. The jack is probably similar to American Audio Jack specification or like the one found on Macbook Pro. I have tried to use it with the Apple, HTC, Nokia earphones which ship with most of the smartphones. Microphone on the headset works the way it should. Thing is that the headsets also come with remote controls to control volume and playback. I am sure that those key presses are sent to the Windows. I was hoping to catch those events and bind those to actual media keys so that I can control music playback. I guess this happens on Macs. I want to do the similar thing on the Windows. I'm just not sure where I can catch the events. Driver level? Application level?

  Read the article

• Creating disk snapshots in Windows 7

  - by Puneet Arora

  Does anyone know of a command or tool to create disk snapshots on Windows 7 (client SKU)? I see vssadmin.exe has a "create shadow" option, but that's available only on server SKUs: http://technet.microsoft.com/en-us/library/cc788055(v=ws.10).aspx I've a backup tool that replicates changes (creations, modifications and deletions to files and directories) since last backup, to my backup volume. Before each time this happens I want to create a persistent snapshot on my backup volume. I could then mount previous snapshots to view previous backups achieving a behavior similar to that of TimeMachine in OS X. This question has been asked before but unfortunately there weren't any good answers: Taking snapshots of filesystem/volume in Windows 7?

  Read the article

• Maintaining a set of (virtual) windows XP machines

  - by Frank Meulenaar

  I have a small set (currently 3, going to 6, not going to be more than 10) of (virtual, vmware workstation) windows XP machine's. They are similar but not exactly the same. I'm currently rolling out windows updates etc by hand: start machine 1, update, close, etc; I'd like to review the updates first before the clients can install them. Incidentally there are also other updates to be performed: changes some files on all machines, install new Java versions, etc. What's a good way of doing this automatic? I tried to search for this but things like Active Directory seem overkill to me.

  Read the article

• Windows 7 - XP Mode - Apache

  - by Howard

  I've setup Virtual PC and XP Mode on my Windows 7 Pro. Using Apache 2.0.52 I have no problems having my website up and running on the Windows 7 machine. But Under VPC/XP Mode the best I can do is Localhost mode. What do I need to do to enable http connections? I need the XP Mode as besides the website I also run a Web BBS and a Dos based (via telnet) BBS. Some of the apps in the Dos BBS just won't work under 64 bit, no matter what setting (capability) are used. Thanks in advance...

  Read the article

• Can't remove file using Truecrypt 6.3a in Windows 7

  - by Marvin

  I am using Truecrypt 6.3a in Windows 7, but cannot remove file, just read only, how can I solve.Thanks.

  Read the article

• CMD file time not always matching windows explorer file time

  - by skyrail

  I have a set of file I need to set the created, modified and last access date to exif date taken value, after a copy between 2 folders (might be fat32 on memory card or ntfs on fixed or usb disk). When I copy a file, the date and time switch to the current date. Then I change all 3 dates manually, either with change attributes in windows explorer or far manager on the command line. To make it faster I wrote a batch script getting original file dates (with php and function stat), building a batch script that invoke nircmd setfiletime for each file. Then I apply this batch to the copied version. The operation is relatively fast and reliable. Unfortunately, a bunch of files have last access and created time different in cmd and windows explorer (1H difference). Very strangely, it happens with dates between november and february, which make the operation unreliable. Why is this happening, and how can I fix it?

  Read the article

• Windows 8 trackpad edge swipe zones

  - by askvictor

  I'm running Windows 8 on a Lenovo x220 laptop; and have just inadvertently discovered the edge-swipe feature or that brings up the charms or switches between desktop and RT. Only problem is that the landing zones are a little too wide for my liking - I'd like to keep this feature, but to narrow the zone where it can start. I'd rather not disable it completely as per: Modify or disable Windows 8 swipe gestures on touchpad / laptop The Synaptic driver (latest available) doesn't seem to provide for changing this (though it does for other zones). Any ideas?

  Read the article

• Remote desktop pressing Windows key randomly

  - by wikiti

  When I'm using remote desktop at work from one specific PC it has a quirk which is really quite irritating. I'll be typing away and suddenly the Windows key will be pressed, things start minimising, explorer launches, workstation gets locked (but it locks the remote workstation, so I have that wallpaper in the background, rather than the wallpaper from the local machine as I would expect). I've swapped keyboards, even though it didn't seem to be related to hardware and it made no difference. Done some internet digging and found someone saying it's related to using windows-l to lock the workstation. I've tried to stop myself using that shortcut to see if it helps and have failed miserably :D It's happening to at least one other user remote desktopping from the same machine to a different PC. Reinstalling isn't really an option (I don't admin the PC or I would have tried it, grr), although I could probably get it done if it would definitely resolve the problem. Any ideas?

  Read the article

• Windows 7 Sleep Problems

  - by salcan

  My desktop's Windows 7 installation was working perfectly but recently I ran into a problem where it would not come out of sleep. The system seems to be running it's just that it won't come out of the sleep state. If I have to guess I would say that it's not recognizing the USB and thus not waking. I'd say this was a standard problem with Windows not sleeping/hibernating properly, but it was working fine for about a year and stopped working around two weeks ago. I have hybrid sleep ON and USB selective suspend ON.

  Read the article

• Internet connection sharing windows server 2008 R2

  - by This is it

  I have one windows server 2008 r2, and that server has 4 network interfaces (3 private, 1 internet connection). I would like to share internet connection with other 3 networks. Windows server firewall should make logs of data that is transfered. It should not be possible to connect directly to private networks from internet. How could I do it? Edit: I tried with NAT in RRAS, but it doesn't work. Here is the configuration: Server: IP private:192.168.0.1 IP public: xx.xx.xx.xx client IP:192.168.0.2 Default gateway: 192.168.0.1 Public and private interface added in NAT section of RRAS.

  Read the article

• Where is the list of available Windows locales?

  - by Richard Cotton

  If you open the Regional and Language Options (via Control Panel), and click on the Regional Options tab, then there is a drop down list of all the available locales. Where is this list populated from? (I want to compare the settings for each locale; I'm fine with how to do that, but I need a list of locale names to loop over.) EDIT: After browsing through my windows directory (should probably mention I'm using XP), the file C:\WINDOWS\system32\locale.nls looks like a plausible candidate, but it's a binary file. Is this what I should be looking at, and if so, how do I read it?

  Read the article

• Laptops on Windows Domain sometimes have problems accessing internet when off-site

  - by FSUScoot

  Hi all-- We've had this problem for a long time. When users travel, sometimes they can't get internet access from a wired or wireless connection. Here are a couple examples: 1) A user goes to a hotel and tries to access the wireless in their room. They can connect to the access point. They open a web browser and they can't get re-directed to the hotel's login page. Because they can't log in, there's no internet access. 2) A user goes to another laboratory/university and tries to access the wired network. They connect, link is fine, PC gets IP from DHCP but no internet access. There's no login page to be re-directed to. It should just "work". What I've found is that it's a DNS issue. Because the computer is on a Windows Domain, it seems it MUST use our DNS servers. Even if you connect to an outside network and do an ipconfig /all, it looks like everything is ok. It'll even show their DNS servers listed in the config. The computer just won't use the other network's DNS server. I found a reg key that keeps our DNS servers listed and it seems that they take priority every time: HKLM\SOFTWARE\Policies\Microsoft\Windows NT\DNSClient All the values under that key are for our AD domain. NameServer and Searchlist never change. What I've found is if the user edits the NameServer string and puts the DNS server of the network they're on, everything works just fine. They get re-directed to the hotel's correct login page or their internet access starts working. It's only a problem if the network they're on blocks outside DNS or a hotel that uses an internal name in their front page redirection that only their DNS server knows about, i.e., not public. If the re-direct page starts with an IP, like 10.10.10.10, it'll work just fine. Obviously this isn't a fix for everyone. Most of my users are pretty knowledgeable so it’s easy for me to walk them through or send them a .reg file that they can edit and run. This problem isn't limited to Windows 7. It was like this with XP as well. It's not hardware related. The problem exists on both wired and wireless, Intel or Broadcom, laptops or desktops. Anyone else have this problem? Is there a GPO I can change that I missed? Got a good work-around for this? Thanks for any help!

  Read the article

• 32 bit programs can't access Internet in Windows 7 64 bit

  - by korona

  I recently got a new ASUS laptop with Windows 7 Home Premium pre-installed. It worked OK for a while but a couple of days ago, suddenly I couldn't access the Internet any more. After narrowing down the problem, I've reached the conclusion that what's happened is that 32 bit programs are suddenly not able to use the Internet, but 64 bit applications work just fine. Examples of programs that DON'T work any more: Google chrome Firefox Internet Explorer 8 World of Warcraft Examples of programs that DO work: Internet Explorer 8 (64 bit) ping (command line) nslookup (command line) ftp (command line) I'm pretty sure that those command line apps are 64 bit native. A re-install of Windows using the recovery partition on the laptop did fix the problem temporarily, but now it's back again. And I seem to be stuck between a rock and a hard place getting someone to take the responsibility for this; the vendor says to talk to ASUS, ASUS says it's a software issue, and Microsoft doesn't give support on OEM licenses... Does anyone know how to solve this issue?

  Read the article

• Best use of new express card on Windows

  - by jckdnk111

  I just bought a 48GB SSD express card for my laptop and I am trying to decide how best to use it. I will be running some sort of virtualization (prob VirtualBox) to test / learn Windows Server administration. I am running Windows 7 Ultimate 64 bit. I have 4GB of RAM and a 7200 RPM SATA hard disk. The express card will read at 115MB/s and write at 65MB/s. So how best to use this new disk? Readyboost, relocate pagefile, store VM disks, mix / match?

  Read the article

• How to log Windows server share connections?

  - by sbussinger

  Can anyone make a suggestion for the best way to log connections and disconnections from Windows workstations to a Windows Server 2003 file share? We're having some issues with workstations that have a drive mapped to a server that seem to work fine for awhile and then suddenly appear to get disconnected from the server (with files open). Needless to say this causes some data corruption and error messages. It would help me to troubleshoot the problem if we could somehow monitor and log the session connections and disconnections, to attempt to correlate the connectivity issues with what actions the user is taking at the time and what the server is doing. I just haven't been able to find a way to do this. Specifically I'm talking about the same information that is displayed in the Computer Management control panel applet in the "System Tools|Shared Folders|Sessions" page. Thanks!

  Read the article

• Windows 7 - Move open programs more freely on the taskbar

  - by SalamiArmi

  When I used Windows XP last year, I had a program called Taskix which let me move the tabs in the taskbar around for programs in any order I wanted. Now that I have Windows 7, a similar function comes built into the operating system - however, it isn't as flexible as Taskix was in XP. Theoretical situation: 1. Open a folder named #1 2. In folder #1, open an instance of a program 3. Open a folder named #2 4. In folder #2, open an instance of the same program that was opened in step 2. After doing this, I will have (in order, on the taskbar) 2 folders open and 2 instances of the programs open. My question really is: Is there any way to fight this automatic ordering of tabs on the taskbar? A registry hack or something would be best, but if there's a third party program out there, that would be nice to know about. Thanks!

  Read the article

• Proxy server on windows with SSL encrypted exchange with client

  - by Syffys

  I want to set up a classic proxy server (HTTPS, HTTPS, SSH, FTP, etc...) on a windows platform, but I need the following features: password authentication for clients data exchanged between clients and server to be SSL encrypted I've been trying to set this up various application to get this result, but without success so far: Squid for windows ccproxy wingate Alternatively, an other solution would be an HTTP SSL tunnel encapsulating an unencrypted proxy connection between clients and the server. I've spent a lot of time without any result so far, so I'm wondering if anyone faced this kind of issue. Thanks in advance!

  Read the article

• Data recovery after user profile corruption on Windows XP

  - by m68z8mi

  I'm away from home for college, and my computer back home has been having some issues. My dad took it to a computer store, and apparently the user profiles somehow got corrupted, so they're locked out of the computer. This is a Windows XP box, but I changed the default administrator account password, so that backdoor isn't a possibility. Now, that computer's HDD has a whole bunch of data on it which my dad would hate to lose, so I suggested that they take the HDD out, plug it into some other computer, and just copy all the data off that way (keeping in mind that the data itself wasn't encrypted). However, the computer store people said that wouldn't be possible unless they had the administrator account password (which I can't remember for the life of me), and that they'd either have to reformat and reinstall Windows, or else use some complicated sounding recovery process costing a decent amount of money. That sounds like complete BS to me, but I'm not 100% sure about it, so I thought I'd get some more opinions. Could someone more knowledgeable about this stuff suggest a good course of action to take?

  Read the article

• 8400GS causes BSOD in Acer M1610 running Windows 7 32-bit

  - by Arch Angel

  Title says it all, just installed the Nvidia card, I know this is a driver related issue I just don't know how to fix it I cannot find a driver version that will work not even the one that windows selects for the card, or the one on the disk supplied with the card. Any help will be appreciated. BSOD output: What happens when I try to install Any driver that does install causes a BSOD the driver disk says it supports windows 7 and the drivers on the disk cause a BSOD too i'm at a loss of what to do. EDIT: Yes I uninstalled the intergrated drivers. PCIE x16 Card from Gainward Tried multiple driver versions Versions that wont install because they cannot pick up card 190.38, 191.07, 196.21, 197.45 Versions that install and cause BSOD 258.96, 260.99, The drivers on the disc (not sure of the version) and drivers from the gainward website (driver version 263.14)

  Read the article

• Windows screen resolution change: lengthen timeout

  - by Jonathan J

  Occasionally I need to change the screen resolution of the console of a Windows virtual machine using XenCenter. When you attempt this change, Windows will revert if you don't accept the changed resolution within 15 seconds of clicking 'apply.' (Normally, this is a good thing.) The problem is that if I have a slow connection between XenCenter and the Xen hypervisor, the virtual console display may not refresh quickly enough to allow me to respond within 15 seconds. As a result, I can't change the resolution, even though the new resolution is valid. Is there a way to increase the timeout before reverting to the original display resolution?

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >