Search Results

Search found 9062 results on 363 pages for 'big empin'.

Page 283/363 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

• Is it immoral to write crappy code even if readability and correctness is not a requirement?

  - by mafutrct

  There are cases when crappy (i.e. unreadable and buggy) code is not much of a problem. For instance, imagine you need to generate a big text file that mostly follows a simple pattern with a few very complex exceptions. What do you do? You quickly write a simple algorithm and insert the exceptional bits in the output manually to save 4 hours. The code is unreadable, and the output is flawed, but it's still the correct way since it is way faster. But let's get this straight: I hate bad code. I've had to read and work with code that caused my stomach to hurt. I care a lot about good code. And actually, I caught myself thinking that it is immoral to write bad code even though the dirty approach is sometimes superior. I was surprised by myself and found my idea to be very irrational. Did you ever experience this? Should I just get rid of this stupid idea and use the most efficient approach to coding?

  Read the article

• Rails named_scope across multiple tables

  - by wakiki

  I'm trying to tidy up my code by using named_scopes in Rails 2.3.x but where I'm struggling with the has_many :through associations. I'm wondering if I'm putting the scopes in the wrong place... Here's some pseudo code below. The problem is that the :accepted named scope is replicated twice... I could of course call :accepted something different but these are the statuses on the table and it seems wrong to call them something different. Can anyone shed light on whether I'm doing the following correctly or not? I know Rails 3 is out but it's still in beta and it's a big project I'm doing so I can't use it in production yet. class Person < ActiveRecord::Base has_many :connections has_many :contacts, :through => :connections named_scope :accepted, :conditions => ["connections.status = ?", Connection::ACCEPTED] # the :accepted named_scope is duplicated named_scope :accepted, :conditions => ["memberships.status = ?", Membership::ACCEPTED] end class Group < ActiveRecord::Base has_many :memberships has_many :members, :through => :memberships end class Connection < ActiveRecord::Base belongs_to :person belongs_to :contact, :class_name => "Person", :foreign_key => "contact_id" end class Membership < ActiveRecord::Base belongs_to :person belongs_to :group end I'm trying to run something like person.contacts.accepted and group.members.accepted which are two different things. Shouldn't the named_scopes be in the Membership and Connection classes? One solution is to just call the two different named scope something different in the Person class or even to create separate associations (ie. has_many :accepted_members and has_many :accepted_contacts) but it seems hackish and in reality I have many more than just accepted (ie. banned members, ignored connections, pending, requested etc etc)

  Read the article

• jQuery .attr() crashing Internet Explorer

  - by Sunyatasattva

  Hello everyone, This is my first time posting a question here, as I usually try to find solutions myself. This one, though, being an IE issue, just drives me crazy. I use jQuery cycle plug-in on a website I made and, to populate a caption div, I use a little function that is called after the image is loaded, which uses the "alt" attribute of the image. This seems to exasperate Internet Explorer, which, doesn't have the time to fulfill this apparently so-complicated task, and, as the slideshow cycles, it enters in an infinite loop and eventually crashes – the newer the version, the worse the crash: the older IEs just display an error message saying “The webpage cannot be displayed”, while the newer (7 and 8) completely crash the system. I have no idea on how to solve or work around this. Here is the problematic code. function changeCaption() { var caption = $("img", this).attr("alt"); $('#caption').fadeIn("slow").html(caption); } Thanks in advance for any pointer: I am amazed as how something so simple and globally recognized (didn't encounter any other browser who had problem with this), can cause a problem so big. I also read somewhere that being able to crash a browser remotely is a serious issue :) Lucio

  Read the article

• How can I start using twill?

  - by brilliant

  I am sorry I have already asked this question on "Superuser", but nobody answers there, so I deleted it from "Superuser" and decided to post it here. Hope it's not a big crime, especially given the fact that I was firstly advised to use twill here on "StackOverflow" (not on "SuperUser") How do I start using twill? I have just downloaded it, unpacked it and clicked on the setup .py file in the folder. The black window (terminal) appeared for a moment and vanished. (I do have Python 2.5 installed on my computer - along with SDK from Google App Engine) In the twill documentation section it says: Downloading twill The latest release of twill is twill 0.9, released Thursday, December 27th, 2007; it is available for download at http://darcs.idyll.org/~t/projects/twill-0.9.tar.gz. You can also use Python's easy_install to install or upgrade twill. twill works with Python 2.3 or later. To start using twill, install it and then type twill-sh. At the prompt type: go http://www.slashdot.org/ show showforms showhistory I am not clear from this passage what I am supposed to type (only "twill-sh" or "twill-sh" and all the words under that line) and where (I tried typing it in the command prompt window of my computer - to no avail) Can, anyone, please, help me out here? Thank You in advance.

  Read the article

• jquery-sortable using behavior of a linkedlist

  - by BabaBooey

  I suspect I'm not looking at this issue in the right way so here goes. I have essentially a LinkedList of data on a web page (http://en.wikipedia.org/wiki/Linked_list) that I'd like to manipulate using traditional Linked List behavior (i.e. just updating the reference/id of the "next" object) for performance reasons. Where this gets a bit tricky is I'd ideally like to use Jquery's sortable to do this. Like the user would drag something up/down and I could just do an Ajax call to the server with the id of the object that moved and the new parent id of that object (and then behind the scenes I could figure out how to reconnect things..maybe need more data than that...). But every example I've seen where sortable is used they were sending the whole re-indexed list to the database to update which seems unnecessary to me. With a linked list to change an element's "index" I only need to make 3 updates which depending on the size of the list could be a big performance savings. Anyone have an example of what I'm trying to do...am I too far in left field?

  Read the article

• Trying to attach a file from SD Card to email

  - by Chrispix

  I am trying to launch an Intent to send an email. All of that works, but when I try to actually send the email a couple 'weird' things happen. here is code Intent sendIntent = new Intent(Intent.ACTION_SEND); sendIntent.setType("image/jpeg"); sendIntent.putExtra(Intent.EXTRA_SUBJECT, "Photo"); sendIntent.putExtra(Intent.EXTRA_STREAM, Uri.parse("file://sdcard/dcim/Camera/filename.jpg")); sendIntent.putExtra(Intent.EXTRA_TEXT, "Enjoy the photo"); startActivity(Intent.createChooser(sendIntent, "Email:")); So if I launch using the Gmail menu context It shows the attachment, lets me type who the email is to, and edit the body & subject. No big deal. I hit send, and it sends. The only thing is the attachment does NOT get sent. So. I figured, why not try it w/ the Email menu context (for my backup email account on my phone). It shows the attachment, but no text at all in the body or subject. When I send it, the attachment sends correctly. That would lead me to believe something is quite wrong. Do I need a new permission in the Manifest launch an intent to send email w/ attachment? What am I doing wrong?

  Read the article

• i18n redirection breaks my tests ....

  - by Mike

  I have a big application covered by more than a thousand tests via rspec. We just made the choice to redirect any page like : / /foo /foo/4/bar/34 ... TO : /en /en/foo /fr/foo/4/bar/34 .... So I made a before filter in application.rb like so : if params[:locale].blank? headers["Status"] = "301 Moved Permanently" redirect_to request.env['REQUEST_URI'].sub!(%r(^(http.?://[^/]*)?(.*))) { "#{$1}/#{I18n.locale}#{$2}" } end It's working great but ... It's breaking a lot of my tests, ex : it "should return 404" do Video.should_receive(:failed_encodings).and_return([]) get :last_failed_encoding response.status.should == "404 Not Found" end To fix this test, I should do : get :last_failed_encoding, :locale => "en" But ... seriously I don't want to fix all my test one by one ... I tried to make the locale a default parameter like this : class ActionController::TestCase alias_method(:old_get, :get) unless method_defined?(:old_get) def get(path, parameters = {}, headers = nil) parameters.merge({:locale => "fr"}) if parameters[:locale].blank? old_get(path, parameters, headers) end end ... but couldnt make this work ... Any idea ??

  Read the article

• How to determine which source files are required for an Eclipse run configuration

  - by isme

  When writing code in an Eclipse project, I'm usually quite messy and undisciplined in how I create and organize my classes, at least in the early hacky and experimental stages. In particular, I create more than one class with a main method for testing different ideas that share most of the same classes. If I come up with something like a useful app, I can export it to a runnable jar so I can share it with friends. But this simply packs up the whole project, which can become several megabytes big if I'm relying on large library such as httpclient. Also, if I decide to refactor my lump of code into several projects once I work out what works, and I can't remember which source files are used in a particular run configuration, all I can do it copy the main class to a new project and then keep copying missing types till the new project compiles. Is there a way in Eclipse to determine which classes are actually used in a particular run configuration? EDIT: Here's an example. Say I'm experimenting with web scraping, and so far I've tried to scrape the search-result pages of both youtube.com and wrzuta.pl. I have a bunch of classes that implement scraping in general, a few that are specific to each of youtube and wrzuta. On top of this I have a basic gui common to both scrapers, but a few wrzuta- and youtube-specific buttons and options. The WrzutaGuiMain and YoutubeGuiMain classes each contain a main method to configure and show the gui for each respective website. Can Eclipse look at each of these to determine which types are referenced?

  Read the article

• How to recursive rake? -- or suitable alternatives

  - by TerryP

  I want my projects top level Rakefile to build things using rakefiles deeper in the tree; i.e. the top level rakefile says how to build the project (big picture) and the lower level ones build a specific module (local picture). There is of course a shared set of configuration for the minute details of doing that whenever it can be shared between tasks: so it is mostly about keeping the descriptions of what needs building, as close to the sources being built. E.g. /Source/Module/code.foo and cie should be built using the instructions in /Source/Module/Rakefile; and /Rakefile understands the dependencies between modules. I don't care if it uses multiple rake processes (ala recursive make), or just creates separate build environments. Either way it should be self-containable enough to be processed by a queue: so that non-dependent modules could be built simultaneously. The problem is, how the heck do you actually do something like that with Rake!? I haven't been able to find anything meaningful on the Internet, nor in the documentation. I tried creating a new Rake::Application object and setting it up, but whatever methods I try invoking, only exceptions or "Don't know how to build task ':default'" errors get thrown. (Yes, all rakefiles have a :default). Obviously one could just execute 'rake' in a sub directory for a :modulename task, but that would ditch the options given to the top level; e.g. think of $(MAKE) and $(MAKEFLAGS). Anyone have a clue on how to properly do something like a recursive rake?

  Read the article

• Any HTTP proxies with explicit, configurable support for request/response buffering and delayed conn

  - by Carlos Carrasco

  When dealing with mobile clients it is very common to have multisecond delays during the transmission of HTTP requests. If you are serving pages or services out of a prefork Apache the child processes will be tied up for seconds serving a single mobile client, even if your app server logic is done in 5ms. I am looking for a HTTP server, balancer or proxy server that supports the following: A request arrives to the proxy. The proxy starts buffering in RAM or in disk the request, including headers and POST/PUT bodies. The proxy DOES NOT open a connection to the backend server. This is probably the most important part. The proxy server stops buffering the request when: A size limit has been reached (say, 4KB), or The request has been received completely, headers and body Only now, with (part of) the request in memory, a connection is opened to the backend and the request is relayed. The backend sends back the response. Again the proxy server starts buffering it immediately (up to a more generous size, say 64KB.) Since the proxy has a big enough buffer the backend response is stored completely in the proxy server in a matter of miliseconds, and the backend process/thread is free to process more requests. The backend connection is immediately closed. The proxy sends back the response to the mobile client, as fast or as slow as it is capable of, without having a connection to the backend tying up resources. I am fairly sure you can do 4-6 with Squid, and nginx appears to support 1-3 (and looks like fairly unique in this respect). My question is: is there any proxy server that empathizes these buffering and not-opening-connections-until-ready capabilities? Maybe there is just a bit of Apache config-fu that makes this buffering behaviour trivial? Any of them that it is not a dinosaur like Squid and that supports a lean single-process, asynchronous, event-based execution model? (Siderant: I would be using nginx but it doesn't support chunked POST bodies, making it useless for serving stuff to mobile clients. Yes cheap 50$ handsets love chunked POSTs... sigh)

  Read the article

• Loop XML including all its children using xpath and SimpleXMLElement

  - by Andersson

  Im having a big xml tree with a simple structure. All I want to do is get a node by its attribute using xpath and loop the children. param1 - correct language param1 & param3 - correct node by its id and the parents id. (Need to use parent id when multiplie id appears. The id is not declared as id in DTD) public function getSubmenuNodesRe($language, $id1,$id2) { $result = $this->xml->xpath("//*[@language='$language']//*[@id='$id1']//menuitem[@id='$id2']/*"); return $result; } This works well, I get the node Im expecting. I having no problems looping the array returned by the xpath query. But when i try to loop childnodes all attributes are gone and many of the methods also. Except getName(). function printNodeName($node) { echo $node->getName(). " - \"" . $node['id']. "\"<br>"; if($node->children()->getName() == "menuitem") { $s = $node->children(); printNodeName($s); } } $result = $xmlNode->getSubmenuNodesRe($_GET['language'], 'foo','bar'); if ($result) { while(list( , $node) = each($result)) { if ($node->getName() == "menuitem") { printNodeName($node); } } } Why is that? only the name will be printed for the $s. Really need help to solve this one, any assistance is deeply appreciated! Thanks for your time.

  Read the article

• What's the compelling reason to upgrade to Visual Studio 2010 from VS2008?

  - by Cheeso

  Are there new features in Visual Studio 2010 that are must-haves? If so, which ones? For me, the big draws for VS2008 as compared to VS2005 were LINQ, .NET Framework multitargeting, WCF (REST + Syndication), and general devenv.exe reliability. Granted, some of these features are framework things, and not tool things. For the purposes of this discussion, I'm willing to combine them into one bucket. What is the list of must-have features for VS2010 versus VS2008? Are there any? I am particularly interested in C#. Update: I know how to google, so I can get the official list from Microsoft. I guess what I really wanted was, the assessment from people using it, as to which things are really notable. Microsoft went on for 3 pages about 2008/3.5 features, and many people sort of boiled it down to LINQ, and a few other things. What is that short list for VS2010? Summary so far, what people think is cool or compelling: Visual Studio engine multi-monitor support new extensibility model based on WPF, prettier and more usable new TFS stuff, incl automated test tools parallel debugging .NET Framework parallel extensions for .NET C# 4.0 generic variance optional and named params easier interop with non-managed environments, like COM or Javascript VB 10.0 collection and array literals / initializers automatic properties anonymous methods / statement lambdas I read up on these at Zander's blog. He described these and other features. Nobody on this list said anything about: Visual Studio engine F# support Javascript code-completion JQuery is now included UML better Sharepoint capabilities C++ moves to msbuild project files

  Read the article

• Something like jQuery's .resizable but without the div's inside

  - by Brendon Muir

  Hi everyone, this is just a quick probe to see if this is technically possible. I'm wanting to enable the resizing of an image in the browser (also within a contentEditable area). Firefox and IE already allow this to be done with their inbuilt handles and it works fine. I'm wanting to implement something for Safari however because it doesn't support this natively. I've had a go with jQuery's resizable method and it does a very good job, however it relies on inserting a bunch of div's along with the image and wrapping that in a big div. This would normally be fine if we weren't concerned with the code generated in the contentEditable area, but we are because it's going to be saved back to the server. I could strip this extra stuff out on save, but I was thinking, is it technically possible to create a resizing script for images that doesn't rely on adding extra div's? Even if we decide to go without handles for now, and just concentrate on detecting when a user is close to the edge of the image, change the mouse cursor to a resizing one, and detect clicks and drags in the 5px's around the edge of the image, is this possible? If it's possible, I'm assuming (hoping) that perhaps it's already been done, but my searching hasn't turned up anything so far. Keen to hear any ideas :)

  Read the article

• OpenCV shape matching

  - by MAckerman

  I'm new to OpenCV (am actually using Emgu CV C# wrapper) and am attempting to do some object detection. I'm attempting to determine if an object matches a predefined set of objects (that I will have to define). The background is well lit and does not move. My objects that I am starting with are bottles and cans. My current approach is: Do absDiff with a previously taken background image to separate the background. Then dilate 4x to make the lighter areas (in labels) shrink. Then I do a binary threshold to get a big blog, followed by finding contours in this image. I then take the largest contour and draw it, which becomes my shape to either save to the accepted set or compare with the accepted set. Currently I'm using cvMatchShapes, but the double return value seems to vary widely. I'm guessing it is because it doesn't take into account rotation. Is this approach a good one? It isn't working well for glass bottles since the edges are hard to find... I've read about haar classifiers, but thinking that might be overkill for my task.

  Read the article

• PHP autoloader: ignoring non-existing include

  - by Bart van Heukelom

  I have a problem with my autoloader: public function loadClass($className) { $file = str_replace(array('_', '\\'), '/', $className) . '.php'; include_once $file; } As you can see, it's quite simple. I just deduce the filename of the class and try to include it. I have a problem though; I get an exception when trying to load a non-existing class (because I have an error handler which throws exceptions). This is inconvenient, because it's also fired when you use class_exists() on a non-existing class. You don't want an exception there, just a "false" returned. I fixed this earlier by putting an @ before the include (supressing all errors). The big drawback with this, though, is that any parser/compiler errors (that are fatal) in this include won't show up (not even in the logs), resulting in a hard to find bug. What would be the best way to solve both problems at once? The easiest way would be to include something like this in the autoloader (pseudocode): foreach (path in the include_path) { if (is_readable(the path + the class name)) readable = true; } if (!readable) return; But I worry about the performance there. Would it hurt a lot? (Solved) Made it like this: public function loadClass($className) { $file = str_replace(array('_', '\\'), '/', $className) . '.php'; $paths = explode(PATH_SEPARATOR, get_include_path()); foreach ($paths as $path) { if (is_readable($path . '/' . $file)) { include_once $file; return; } } }

  Read the article

• Flash CS4 compiler Error 1120 when embedding pngs into class instance variables.

  - by theolagendijk

  I have a Flash CS4 (Flash 9 ActionScript 3.0) project that compiles and runs perfectly on my machine. However it is part of a big batch of fla's that I want to compile on another (faster) machine. When I copy the project (the fla and all actionscripts and assets files) to the faster machine, it's Flash CS4 compiler gives me compiler error 1120 "Access of undefined property ButtonPause_PauseNormal". The property "PauseNormal" is an embedded png. The PNG is available. No transcoder errors. Here's the ActionScript for class "ButtonPause"; package nl.platipus.NissanESM.buttons { import flash.display.*; import flash.events.*; public class ButtonPause extends Sprite { [Embed(source="../../../../player/pause.png")] private var PauseNormal:Class; [Embed(source="../../../../player/pause_mo.png")] private var PauseMouseOver:Class; private var stateNormal:Bitmap; private var stateMouseOver:Bitmap; public function ButtonPause() { stateNormal = new PauseNormal(); stateNormal.width = 29; stateNormal.height = 14; stateNormal.alpha = 1; addChild(stateNormal); stateMouseOver = new PauseMouseOver(); stateMouseOver.width = 29; stateMouseOver.height = 14; stateMouseOver.alpha = 0; addChild(stateMouseOver); width = 29; height = 14; addEventListener(MouseEvent.MOUSE_OVER, handleMouseOver); addEventListener(MouseEvent.MOUSE_OUT, handleMouseOut ); } private function handleMouseOver(evt:MouseEvent):void { stateNormal.alpha = 0; stateMouseOver.alpha = 1; } private function handleMouseOut(evt:MouseEvent):void { stateNormal.alpha = 1; stateMouseOver.alpha = 0; } } } (Both machines run the exact same Flash CS4 Profesional Version 10.0.2 installation and both have the exact same publish settings and ActionScript 3.0 settings.) What's going on?

  Read the article

• Best way to store list of numbers and to retrieve them

  - by bingoNumbers

  Hi. What is the best way to store a list of random numbers (like lotto/bingo numbers) and retrieve them? I'd like to store on a Database a number of rows, where each row contains 5-10 numbers ranging from 0 to 90. I will store a big number of those rows. What I'd like to be able is to retrieve the rows that have at least X number in common to a newly generated row. Example: [3,4,33,67,85,99] [55,56,77,89,98,99] [3,4,23,47,85,91] Those are on the DB I will generate this: [1,2,11,45,47,88] and now I want to get the rows that have at least 1 number in common with this one. The easiest (and dumbest?) way is to make 6 select and check for similar results. I thought to store numbers with a large binary string like 000000000000000000000100000000010010110000000000000000000000000 with 99 numbers where each number represent a number from 1 to 99, so if I have 1 at the 44th position, it means that I have 44 on that row. This method is probably shifting the difficult tasks to the Db but it's again not very smart. Any suggestion?

  Read the article

• Need help with WCF design

  - by Jason

  I have been tasked with creating a set of web services. We are a Microsoft shop, so I will be using WCF for this project. There is an interesting design consideration that I haven't been able to figure out a solution for yet. I'll try to explain it with an example: My WCF service exposes a method named Foo(). 10 different users call Foo() at roughly the same time. I have 5 special resources called R1, R2, R3, R4, and R5. We don't really need to know what the resource is, other than the fact that a particular resource can only be in use by one caller at a time. Foo() is responsible to performing an action using one of these special resources. So, in a round-robin fashion, Foo() needs to find a resource that is not in use. If no resources are available, it must wait for one to be freed up. At first, this seems like an easy task. I could maybe create a singleton that keeps track of which resources are currently in use. The big problem is the fact that I need this solution to be viable in a web farm scenario. I'm sure there is a good solution to this problem, but I've just never run across this scenario before. I need some sort of resource tracker / provider that can be shared between multiple WCF hosts. Any ideas from the architects out there would be greatly appreciated!

  Read the article

• return sql query in xml format in python

  - by Ramy

  When I first started working at the company that i work at now, I created a java application that would run batches of jasper-reports. In order to determine which parameters to use for each report in the set of reports, I run a sql query (on sqlserver). I wrote the application to take an xml file with a set of parameters for each report to be generated in the set. so, my process has become, effectively, three steps: run the sql query and return the results in XML format (using 'for XML auto') run the results of the sql query through an XSLT transformation so the xml is formatted in such a way that is friendly with the java application i wrote. run the java application with that final xml file As you can imagine, what I'd like to do is accomplish these steps in python, but i'm not quite sure how to get started. I know how to run an SQL query in Python. I see plenty of documentation about how to write your own xml document with Python. I even see documentation for xsl transformations in python. the big question is how to get the results of the sql query in XML through python. Any and all pointers would be very valuable. Thanks, _Ramy

  Read the article

• DotNetOpenAuth occasionally throws a NotImplementedException

  - by Chris Moschini

  I have DotNetOpenAuth running on a background thread making calls to Google authorized with OAuth on a regular basis. About once a day, which is about one in 10,000 calls, I get the following Exception: An unhandled exception occurred and the process was terminated. Application ID: DefaultDomain Process ID: 3316 Exception: System.NotImplementedException Message: The method or operation is not implemented. StackTrace: at DotNetOpenAuth.Messaging.ProtocolException.GetObjectData(SerializationInfo info, StreamingContext context) in c:\Users\andarno\git\dotnetopenid\src\DotNetOpenAuth\Messaging\ProtocolException.cs:line 90 at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter, SerializationBinder binder) at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.Serialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter, SerializationBinder binder) at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck) at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck) at System.Runtime.Remoting.Channels.CrossAppDomainSerializer.SerializeObject(Object obj, MemoryStream stm) at System.AppDomain.Serialize(Object o) at System.AppDomain.MarshalObject(Object o) If it was thrown and caught once a day I'd be fine, but this is a big one - I'm getting this in the Application Error log on the server, and it's crashing the process entirely - the site goes down and restarts. Has anyone else run into this? Something I'm clearly doing wrong?

  Read the article

• How to exit an if clause

  - by Roman Stolper

  What sorts of methods exist for prematurely exiting an if clause? There are times when I'm writing code and want to put a break statement inside of an if clause, only to remember that those can only be used for loops. Lets take the following code as an example: if some_condition: ... if condition_a: # do something # and then exit the outer if block ... if condition_b: # do something # and then exit the outer if block # more code here I can think of one way to do this: assuming the exit cases happen within nested if statements, wrap the remaining code in a big else block. Example: if some_condition: ... if condition_a: # do something # and then exit the outer if block else: ... if condition_b: # do something # and then exit the outer if block else: # more code here The problem with this is that more exit locations mean more nesting/indented code. Alternatively, I could write my code to have the if clauses be as small as possible and not require any exits. Does anyone know of a good/better way to exit an if clause? If there are any associated else-if and else clauses, I figure that exiting would skip over them.

  Read the article

• Javascript doesnt update

  - by Trikam

  Hi all, I have a function that passes a parameter which is a function call and then i use setTimeout to call this passed function call. now i tried two methods with setTimout to raise the event and i used function.call(). When this passed parameter function call was raised none of the javascript was being updated, below is the javascript which im using to raise the event and the javascript which is supposed to be updated: The function being passed is [context] - function() { ErrorMessageFileSelect('diverrortextchoosechannal','The file chosen is to big, you must choose a file less than 1MB'); } function FileSizeOnLoad(contentLength,context) { if (context != null) { // context.call(); setTimeout(context,0); // or context.call(); } else { $('#inputHiddenFileSizeField').val(contentLength); DisplayChoseFileInformation(contentLength); } } //this is where the update should happen function ErrorMessageFileSelect(className, errorMessage) { $('div.' + className).text(errorMessage); alert($('div.' + className).text()); } Is there somthing im missing, can someone help me with this issue please. Thanks

  Read the article

• Link checker ; how to avoid false positives

  - by Burnzy

  I'm working a on a link checker/broken link finder and I am getting many false positives, after double checking I noticed that many error codes were returning webexceptions but they were actually downloadable, but in some other cases the statuscode is 404 and i can access the page from the browse. So here is the code, its pretty ugly, and id like to have something more, id say practical. All the status codes are in that big if are used to filter the ones i dont want to add to brokenlink because they are valid links ( i tested them all ). What i need to fix is the structure (if possible) and how to not get false 404. Thank you! try { HttpWebRequest request = ( HttpWebRequest ) WebRequest.Create ( uri ); request.Method = "Head"; request.MaximumResponseHeadersLength = 32; // FOR IE SLOW SPEED request.AllowAutoRedirect = true; using ( HttpWebResponse response = ( HttpWebResponse ) request.GetResponse() ) { request.Abort(); } /* WebClient wc = new WebClient(); wc.DownloadString( uri ); */ _validlinks.Add ( strUri ); } catch ( WebException wex ) { if ( !wex.Message.Contains ( "The remote name could not be resolved:" ) && wex.Status != WebExceptionStatus.ServerProtocolViolation ) { if ( wex.Status != WebExceptionStatus.Timeout ) { HttpStatusCode code = ( ( HttpWebResponse ) wex.Response ).StatusCode; if ( code != HttpStatusCode.OK && code != HttpStatusCode.BadRequest && code != HttpStatusCode.Accepted && code != HttpStatusCode.InternalServerError && code != HttpStatusCode.Forbidden && code != HttpStatusCode.Redirect && code != HttpStatusCode.Found ) { _brokenlinks.Add ( new Href ( new Uri ( strUri , UriKind.RelativeOrAbsolute ) , UrlType.External ) ); } else _validlinks.Add ( strUri ); } else _brokenlinks.Add ( new Href ( new Uri ( strUri , UriKind.RelativeOrAbsolute ) , UrlType.External ) ); } else _validlinks.Add ( strUri ); }

  Read the article

• Getting started with massive data

  - by Max

  I'm a math guy and occasionally do some statistics/machine learning analysis consulting projects on the side. The data I have access to are usually on the smaller side, at most a couple hundred of megabytes (and almost always far less), but I want to learn more about handling and analyzing data on the gigabyte/terabyte scale. What do I need to know and what are some good resources to learn from? Hadoop/MapReduce is one obvious start. Is there a particular programming language I should pick up? (I primarily work now in Python, Ruby, R, and occasionally Java, but it seems like C and Clojure are often used for large-scale data analysis?) I'm not really familiar with the whole NoSQL movement, except that it's associated with big data. What's a good place to learn about it, and is there a particular implementation (Cassandra, CouchDB, etc.) I should get familiar with? Where can I learn about applying machine learning algorithms to huge amounts of data? My math background is mostly on the theory side, definitely not on the numerical or approximation side, and I'm guessing most of the standard ML algorithms don't really scale. Any other suggestions on things to learn would be great!

  Read the article

• How to make an equation span the whole page / line in LaTeX?

  - by Reed Richards

  I have this equation and it's quite big (basically a FDM one) but it aligns with the text and then continues out on the right side to the nothingness. I've tried stuff like \begin{center} and \hspace*{-2.5cm} but to no avail. I want it to use the whole line not just from the left-margin and out to the right. How do I do it and do I need to install some special package for it? I use the \[ instead of the displaymath like this \[ Equation arrays here \] The code \[ \left( \begin{array}{cccccc} -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) & 0 & \cdots & 0 \\ -\kappa & -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) & 0 & \cdots \\ 0 & -\kappa & -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) & 0 & \cdots \\ \vdots & 0 & \ddots & \vdots \\ \vdots & \vdots & \vdots & -\kappa & -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) \\ 0 & \vdots & \vdots & 0 & \kappa - \frac{2h\kappa_{v}}{\kappa}(\frac{hv\rho}{2} - \kappa) & -2\kappa \\ \end{array} \right) \left( \begin{array}{c} T_{1} \\ T_{2} \\ \vdots \\ T_{n} \\ \end{array} \right) = \left( \begin{array}{c} Q(0) + \kappa T_{0} \\ Q(h) \\ Q(2h) \\ \vdots \\ Q((n-1)h) \\ 2\frac{\kappa_{v}}{\kappa_{v}}T_{out} \\ \end{array} \right) \]

  Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >