Search Results

Search found 11380 results on 456 pages for 'cpu speed'.

Page 283/456 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

  • Setup for NEW HDD?

    - by Ed Markey
    Building my FIRST computer. Will start with at least - one HDD, I purchased a WD SATA HDD a 10,000RPM VelociRaptor 500GB. I have read that if you use one of the settings, can't remember what it's called, that it would make an HDD rund at IDE speeds??? Could I or should I run it in RAID instead? Is RAID only for more than one HDD/ssd? I would like to get like a 64GB SSD later to maybe speed things up working together. Thanks

    Read the article

  • Setup a local file server for two networks

    - by rzlines
    Hi I would like to setup a local linux file server (using centos and samba) that can be accessed by two independent local networks in the same house. I have 2 networks on the same floor which have Windows 7 computers, but the networks are split as we have 2 internet connections. How do I go about this? Additional info: Currently both the networks use DropBox to send files to each other but that happens via the Internet and hence its slow. Would like to achieve the same locally to increase the speed.

    Read the article

  • My Computer will not turn on?

    - by user269120
    I recently built a gaming pc. It was working fine before the following events: I installed a graphics card driver update then: in windows it said that the user experience index needed to be refreshed, so i started the test and somewhere in the middle of the test my pc just switched off. No shutting down just stopped. Now it won't turn back on. I have checked its plugged in and the switch on psu is down, i tried a different power cable and i checked all the connections. When i press the power button nothing happens, no fans no lights no post beep. Computer Parts: Motherboard: Gigabyte GA78LMT-USB3 CPU: AMD FX-6350 @ 3.9 Ghz RAM: 2x4gb Crucial Ballistix Sport Power Supply: Tesla 750w psu Graphics card: XFX Radeon 7870 DD Case: CiT Vantage R Gaming Case Hard Drive: 2TB Western Digital Caviar Green Please help me, this computer is only a week old since i built it. All anwsers are appreciated :)

    Read the article

  • Websites not working with Opera 11.00, major bugs

    - by s hanley
    Sites like ebay and even superuser stop working properly when I use opera 11.00. Menus stop working everywhere from ebay to godaddy. Hovering on a menu item doesn't expand it, no sub menu slides out. This makes a large number of very popular websites unusable. Am I right in assuming this is a javascript issue? I use opera for the turbo feature (I have tested opera with and without turbo so it's not turbo's fault) because I'm on mobile broadband until I get my phone line sorted out. Turbo helps me save money, as well as allowing me to surf at a sane speed. Is there a firefox or chrome equivalent to opera turbo that doesn't cost money? I'm using Opera 11.00, build 1156.

    Read the article

  • Open source monitoring tool without sending data to "Their Server"

    - by hangu
    I trying to use open source server monitoring tool. I know there are a lot, but I couldn't find what I need.. the basic process of monitoring tool I used to use before was, 1) Install agent in my server which I want to monitor 2) The agent send data to "their server" 3) I can check the health of my server through web browser presented by them. What I need is, avoiding "Step 2". Are there any monitoring tool that I can use? I have Windows 2008 and Linux servers simple feature will be enough like (CPU, Memory, Network..) Thank you

    Read the article

  • Is is better to combine Apache for file manipulation and upload and Nginx for static file serving, or to use one of the two alone

    - by user1032393
    Based on my research, I've read that nginx is best and ideal for serving up static files and images. My application depends heavily on uploading of images and rewriting them, then serving them up. Given that I only have one VPS currently, it has been suggested that I use nginx to serve up the images and website, and reverse proxy to Apache (on the same VPS) to rewrite files with image magick and handle the file uploads. Which would be the best solution, Apache, Nginx, or Apache + Nginx? In terms of best solution, I'm looking at minimal average RAM consumption, while maintaining decent load speed of maybe sub 2 seconds?

    Read the article

  • What components should I upgrade to squeeze more life of my pc? [on hold]

    - by Jared
    Hi my current specs are CPU: Intel Core i5 750 2.66 GHz, Socket 1156 Motherboard: Asus P7P55 LX Motherboard, Socket 1156, 4xDIMM DDR3, 2xPCIe-16, 3xPCI, 2xPCIe-1, 14xUSB2, Audio, 1xATA, 6xSATA, RAID, ATX HDD: Seagate Barracuda 7200.11 ST31500341AS Hard Disk Drive, 1500GB, 7200rpm, 32MB Cache, SATA-2 RAM: G.Skill Ripjaw F3-12800CL8D-4GBRM, 2x2GB, DDR3-1600, PC3-12800, CL8, DIMM Video: MSI Radeon 5850 R5850-PM2D1G Video Card, 1024MB, DDR5, PCIe-16, DVI, CrossFire, HDMI PSU: Vantec ION2, 620W ATX PSU, SLI Ready, Black Firstly I know it badly needs an SSD, for which I'm thinking of the Samsung 250gb 840 EVO series. The ram could do with another 4GB, for which I am thinking of replacing the 2x2GB for 2x4GB of the same type. My video card is struggling with the latest releases, so vitally should I ditch the video card and go for something newer (ATI 7850, GTX 660?) or try and get another 5850 for crossfire support? Bearing in mind 5850's are sort of hard to come buy now as they are not stocked in shops usually, which means they have to be bought second hand.

    Read the article

  • How I can view and block specific applications temporarily from accessing Internet?

    - by Curious Apprentice
    I don't want to block any application permanently from accessing internet. I just want to block some specific applications for a particular time period to gain speed in running some other. I know about one such great tool - that is "Comodo firewall". It can smoothly block and accurately display apps accessing internet. The only problem of installing this is, Windows recommends only one firewall apps and as Im running Windows 7 x64 Ultimate there will be complications if I install this one. I need a tool which can accurately display which apps are accessing internet (through which port) and how much data they are receiving or sending. I also need some arrangement within the app so that I can easily temporarily block that app from accessing internet.

    Read the article

  • Virtualizing Windows with VT-d to play within it

    - by Bahaïka
    I would like to know if what I want to is possible. First, here is my hardware configuration : MB : Gigabyte H77-DS3H Intel Core i5 3330 (3.00GHz) MSI Nvidia GTX 760 8 Gb RAM 1333 MHz What I want to do is to have a linux (probably ArchLinux) as a main and unique OS on my computer (I don't want a dualboot). And virtualizing Windows under Linux. I've read about VT-d (supported by my CPU) and PCIBackHide. I'd like to know if I can initialize Linux with the Integrated Graphics and Virtualize Windows to use the GTX 760. If I can do it, where do I have to plug my two screens ? On the MainBoard or the GTX 760 ? How do I achive that idea ?

    Read the article

  • ATI HD 5970 display

    - by user55406
    Hello everyone i'm a little worry about my graphic card. before I get into that I will tell you my system specs. I have intel dx58so mainboard, 6gb corsair xms ddr3 ram, intel i7 960 cpu, and ati hd 5970. I'm also using a coolmaster haf92 case. My OS is vista X64. Here is my issue when I type in dxdiag in (Start Search) and I look into display. I see in (approx total memory) 716mb graphic memory. The ati hd 5970 is a 2gb graphic card. Am I being stuipd or is there an issue.

    Read the article

  • Why I'm unable to use up/down arrows in my BIOS?

    - by nexus
    My BIOS is loading and when I wanted to change anything, the up/down arrows aren't working. What might be the problem? I want to change boot options, but I'm unable to select the boot from CD option. My BIOS version is f2.3. Do I need to upgrade it? I need my system for 2 more months continuously and I'm afraid if there might be some problem upgrading. But anyway, what might be the cause for this behavior? For you info I have the pavilion dv6 series laptop, BIOS version: f.23 processer: Intel(R) core(TM) i3 CPU M 370 @ 2.40ghz 2.40GHZ 2.40 GHZ

    Read the article

  • tar gzip slowing down server

    - by Josir
    I have a backup script that: compress some files generate md5 copy the compressed file to another server. the other server finishes comparing MD5 (to find copy errors). Here it's the core script: nice -n 15 tar -czvf $BKP $PATH_BKP/*.* \ | xargs -I '{}' sh -c "test -f '{}' && md5sum '{}'" \ | tee $MD5 scp -l 80000 $BKP $SCP_BKP scp $MD5 $SCP_BKP This routine got CPU at 90% at gzip routine, slowing down the production server. I tried to add a nice -n 15 but server still hangs. I've already read 1 but the conversation didn't help me. What is the best approach to solve this issue ? I am open to new architectures/solutions :)

    Read the article

  • Hybrid HDD/SSD Volume Windows

    - by ccrama
    Is it possible to create a hybrid drive-like experience using an ssd and a hdd? In theory, frequently used files would be stored on the faster ssd, and larger/less used would be moved to the hdd. I know you can create shared volumes in windows, but the speed differences would create some issues I would assume, and it doesn't have drive preference for what gets stored on what drive. Any programs/info/advice would be great! Thanks! (PS. I saw this question, but it was asked three years ago and some solutions have probably changed)

    Read the article

  • I am making a maze type of game using javascript and HTML and need some questions answered [on hold]

    - by Timothy Bilodeau
    First off, i am a noob to JavaScript but am willing to learn. :) I found a simple JavaScript moment engine created by another member on this site. Using that i made it so my character can walk around within a rectangle/square shaped room. I want to make it so the character can walk through a "doorway" within a wall to the next room. Either that or make it so if the character moves over a certain image within the room it will take the player to another webpage in which the character "spawns" into the room and so on and so fourth. Here is a link to what i have made so far as to get an idea. http://bit.ly/1fSMesA Any help would be much appreciated. Here is the javascript code for the character movement and boundaries. <script type='text/javascript'> // movement vars var xpos = 100; var ypos = 100; var xspeed = 1; var yspeed = 0; var maxSpeed = 5; // boundary var minx = 37; var miny = 41; var maxx = 187; // 10 pixels for character's width var maxy = 178; // 10 pixels for character's width // controller vars var upPressed = 0; var downPressed = 0; var leftPressed = 0; var rightPressed = 0; function slowDownX() { if (xspeed > 0) xspeed = xspeed - 1; if (xspeed < 0) xspeed = xspeed + 1; } function slowDownY() { if (yspeed > 0) yspeed = yspeed - 1; if (yspeed < 0) yspeed = yspeed + 1; } function gameLoop() { // change position based on speed xpos = Math.min(Math.max(xpos + xspeed,minx),maxx); ypos = Math.min(Math.max(ypos + yspeed,miny),maxy); // or, without boundaries: // xpos = xpos + xspeed; // ypos = ypos + yspeed; // change actual position document.getElementById('character').style.left = xpos; document.getElementById('character').style.top = ypos; // change speed based on keyboard events if (upPressed == 1) yspeed = Math.max(yspeed - 1,-1*maxSpeed); if (downPressed == 1) yspeed = Math.min(yspeed + 1,1*maxSpeed) if (rightPressed == 1) xspeed = Math.min(xspeed + 1,1*maxSpeed); if (leftPressed == 1) xspeed = Math.max(xspeed - 1,-1*maxSpeed); // deceleration if (upPressed == 0 && downPressed == 0) slowDownY(); if (leftPressed == 0 && rightPressed == 0) slowDownX(); // loop setTimeout("gameLoop()",10); } function keyDown(e) { var code = e.keyCode ? e.keyCode : e.which; if (code == 38) upPressed = 1; if (code == 40) downPressed = 1; if (code == 37) leftPressed = 1; if (code == 39) rightPressed = 1; } function keyUp(e) { var code = e.keyCode ? e.keyCode : e.which; if (code == 38) upPressed = 0; if (code == 40) downPressed = 0; if (code == 37) leftPressed = 0; if (code == 39) rightPressed = 0; } </script> here is the HTML code to follow <!-- The Level --> <img src="room1.png" /> <!-- The Character --> <img id='character' src='../texture packs/characters/snazgel.png' style='position:absolute;left:100;top:100;height:40;width:26;'/>

    Read the article

  • Windows 7 100% Memory Usage (without any process listed as using that much memory)

    - by Paul Tarjan
    When I plug my external USB 2TB hard drive into my windows 7 box, my RAM usage climbs up to all 4 Gigs (but in task manager it shows that all process are small) and the hard drive is churning like crazy. My CPU is only about 20% utilized All I can think of is there is a Virus scanner or an indexer running like crazy. I've tried to kill all virus scanners (AVG and Windows Security Essentials) and it still keeps going. My computer is completely unusable as everything is constantly swapping. I've tried leaving it on for 2 days now and it still hasn't finished whatever it was doing. Any ideas?

    Read the article

  • How many site visitors can my server handle? [closed]

    - by coolboycsaba
    I have a website, and I want to host it on my own computer, but I'm wondering if it's good enough. The website checks if the user is logged in and then displays 15 items (title, description) from a mysql database and the rating (stored in another database) and the comments (another database) for each item. It also displays some stats (number of items, comments). I also have an image for each item. My specs are: AMD Athlon 64 X2 Dual Core Processor 5600+ 2.90 GHz RAM: 4.00GB Windows 7 64bit So what do you think, how much visitors and items could it handle (at once or daily) ? My internet connection is good, around 7-10 mb upload and same download speed

    Read the article

  • Best Linux distro for media server on older box

    - by fauxpride
    I have an older machine with these specs: CPU: AMD Athlon X2 @ 2,8 Ghz, 2MB L2 RAM: 4 GB DDR2@ 800 Mhz GPU: Asus 4890 TOP 1 GB I want to turn the machine into a media server via XBMC (so good video and wireless peripherial driver support would also be a plus), but I also want to use it as an OpenVPN server so I can tunnel RDP to my other Windows machine in the network. I mostly want to use a Debian based distro (for the convenience of apt) and right now my options are: Ubuntu, Xubuntu or Mint. Which one do you think is more fitting? Thanks in advance.

    Read the article

  • how to manage a multi user server on linux?

    - by user1175942
    I'm working on a university project, where I have Tomcat as a web server, and I want to create a multi user environment on top of linux, so every user that logs into my website has his own credentials, and he can access only his own data (files and folders...). The main issue is that the purpose of the website is executing code on the server-side, so I must have a good (reasonable) protection against malicious code. (a user destroying his own user is fine by me) I thought that defining a linux-user for every website-user is the best solution - it isolates each user from the other, and I can define each one's permissions. Can I create users in linux using shell commands? Can I configure max quota/memory/cpu for a user? Anyone has another idea for managing that kind of multi-user environment?

    Read the article

  • nagios service check

    - by DRH
    I am new to nagios and we have a small issue I need to ask assistance with. Many of the machines that we monitor can go unresponsive for a bit when some very intensive cpu tasks are run. This makes nagios send warnings and alerts while these hosts are busy reporting things like 'ping timeout' or 'zombie processes' and even swap space warnings, but in actuality there is not a problem. Is there a way to configure nagios to not send such alerts, but check x number of times over a period of time and only then send an alert at the end of that time if the server in question has not recovered?. Looking at the commands.cfg file, I see entries like this: define command{ command_name check_local_swap command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$ } How could I modify this example to accomplish what I want above. Thanks

    Read the article

  • Computer won't start when connecting SATA HDD

    - by vlad
    I just bough a new HDD some time ago and recently i bought another SATA cable to have both HDDs connected at the same time, to transfer all the files from the older one to the newer. When i connected both of them, the computer started working, i tapped F2 to go to bios to make sure it was detected, and then after 5-10 seconds the computer instantly shut down. After this incident, my computer won't start at all when connecting the SATA power supply to the old HDD. If i connect only my new drive, it works without any problem. If i connect only my old drive, or both the old drive and the new one, and then push on the power button, the cpu fan simply rotates about 5 degrees and then stops.. and that's it, the computer doesn't start, and no sound from the pc speaker either. Is there any way to recover my files from the old HDD and transfer them to my new one? I do not want to use the old HDD any more, i only need to save all my files.

    Read the article

  • SCCM - How to make new deployed applications appear in Software Center faster?

    - by icehac
    I am trying to make the process between SCCM deployments and the Software Center (configmgr) faster, if not seamless. Right now, applications generally take about 1-2 hours to populate properly. However, by going to the "Configuration Manager" under the Windows Control Panel, there is an "Actions" tab. Generally 5 minutes after running these "Actions", the software will populate inside the Software Center. The downside of this is the user interaction with the "Actions" pane...I can't have a user going through this process when they request a new application that needs to be deployed through SCCM. I have have played around with using "net stop ccmexec" and "net start ccmexec" to manually run all of these "Actions" on the start command, but it feels a bit archaic. Does anyone have any suggestions how to speed this process up? I feel there is something simple I am missing.

    Read the article

  • Restrict whole system on certain cores except a few process?

    - by icando
    Hi I am running some latency sensitive program on a Linux machine (more specifically, CentOS 6), and I don't want the threads of the process being preempted. So in my plan, the first step is to set cpu affinity of the threads so that threads are running on separate cores, so they don't preempt each other. Then the second step is to make sure other processes in the system not running on these cores. So my question is: is it possible to restrict the whole system running on certain cores, except this process? This should apply to any newly created processes in the future.

    Read the article

  • SCCM? Overkill?

    - by Le_Quack
    T. technician in a high school with around 1600 students 250 staff and 800+ client computers mostly running W7 I'm looking for a better way to manage clients (deploy software, track changes, inventory etc) I like the look of SCCM 2012 features but the case studies seem to be aimed at large multi-site infrastructural rather than a single mid sized site. Is SCCM suitable for a mid sized single site or is it aimed at much larger corporations, if so what would be more suitable Just a note about me and my situation. I work as a technician in a school part of a team of 3. My boss seems content with a network that works (just about) not a productive well maintained network that is easy to run and maintain. I'm still fairly early on in my I.T. career so sorry if I'm not up to speed on all products. EDIT: Thanks for all the help I'll take a look at SCE and SCCM and get some proposals drawn up to take to my boss/deputy head

    Read the article

  • What combination of soft to select? (your advice/opinion) [on hold]

    - by Flyer
    I'm thinking of upgrading my server soft along with OS. As of now, my VPS is running on Debian 6 with nginx (1.2.4) - apache (2.2.16). My VPS specs are 1Gb RAM, 2 cores of Intel(R) Xeon(R) CPU E5520 @ 2.27GHz. Now, here is the question. Which combo should I run? - nginx - apache (2.4.x) - PHP-fpm 5.5.x - nginx - apache (2.4.x) - mod_php 5.5.x - apache (2.4.x) - mod_php 5.5.x - apache (2.4.x) - PHP-fpm 5.5.x - nginx - PHP-fpm 5.5.x - nginx - mod_php 5.5.x I would really like some advice/opinion of people who are more experienced than me with these things. It's nothing big. Around 100-200k pageviews per month. I can also provide some screenshots of munin stats if needed.

    Read the article

  • Memory Speeds: 1x4GB or 2x2GB? [closed]

    - by Dasutin
    When it comes to speeds what is faster having one 4GB module in your system or having two 2GB modules. I'm not taking in the fact that the system could have dual channel capabilities. Also what about a server environment? Would it be better to have one large, high density module or break it up into several modules for speed and price? I heard an engineer at my office having a discussion with an employee. He said that its better in all situations to have one large capacity modules instead of breaking it up. It would be cheaper and perform faster. He also said it would take longer for the computer to access what it needed if there were more modules instead of having just one. His explanation didn't seem right to me and I thought I would post this question here to see what other people thought.

    Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >