Search Results

Search found 11380 results on 456 pages for 'cpu speed'.

Page 279/456 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

  • Memory works fine separately, but not together

    - by patersonjs
    I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

    Read the article

  • When should I use SATA 6gb/s?

    - by Gili
    I purchased a Baraccuda hard-drive (model ST3000DM001) that supports a maximum read transfer rate of 210 MB/s and SATA 1.5/3/6 Gb/s. My motherboard has a limited number of 6 Gb/s ports so I'd like to reserve them for when it's really necessary. When does a hard-drive benefit from a SATA 6 Gb/s port? Doesn't it require a transfer speed of at least 375 MB/s to surpass the limit of SATA 3 Gb/s? Are there any other benefits of SATA 6 Gb/s vs 3 Gb/s ports?

    Read the article

  • How do I disable Windows Search Indexing Service while on battery on Windows 7?

    - by Slaggg
    Since upgrading from Windows XP to Windows 7, I've found laptop battery life is reduced. One issue is that the Windows Search Indexing Service is constantly running, even when on battery power. Using Resource Monitor shows it is often the top consumer of CPU time and top producer of disk activity. I imagine this is one of the primary reasons the battery is getting drained faster. I cannot find any options to tell Windows Search Indexing Service to not index while on battery power. The only solution seems to be to stop the service, and also disable the service (if you just stop it, it will restart itself after a while). Doing this gives me considerably more battery life, but it's a pain because I have to re-enable the service when plugged in again. Is there a better solution?

    Read the article

  • Do HTTP reverse proxies typically enable HTTP Keep-Alive on the client side of the proxied connection and not on the server side?

    - by LostInComputer
    HAProxy has the ability to enable HTTP keep-alive on the client side (client <- HAProxy) but disable it on the server side (HAProxy <- server). Some of our clients connect to our web service via satellite so the latency is ~600ms and I think that by enabling keep-alive, it will speed things up a bit. Am I right? Is this supported by Nginx? Is this a widely implemented feature in other software and hardware load balancers? What else besides HAProxy?

    Read the article

  • Data transfer is extrem slow after partitioning extern usb drive

    - by user125912
    I bought an extern usb 3.0 drive with 500 gb capacity. OS is Windows 7. I use it with an usb 2.0 slot, no prob. Initially I used it without making several partitions and it was fast as hell. Then I had the great idea to make partitions, one for programs, one for data and one for backup. I chose the free EASEUS Partition Master 9.1.1. and ended up with these partitions: F:Apps, primary, NTFS, 100gb H:Data, logic, NTFS, 250gb B:Backup, logic, NTFS, 150gb THE PROBLEM: When I copy files from C: to F: I get a transfer rate of about 100 KB/S ! When I copy files from C: to H: I get a transfer rate of about 4 MB/S ! thats all muuuch to slow, slower then before. What can I do to speed the shit up? Thanks in advance!

    Read the article

  • Home router for higher network loads

    - by Zizzencs
    I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

    Read the article

  • How to tune Windows 2008r2 and IIS to maximize single file download speeds?

    - by uSlackr
    We recently put up an IIS site (on WinSvr 2008r2) that is used almost exclusively for downloading files over the internet. The data exists as a large collection of .zip files ranging from 1MB - 35GB in size. We want to allow a lot of downloads during a day (more than 500GB) but have implemented an outbound ASA throttle at 60mbps in order to preserve bandwidth for other uses. The total link speed is 100mbps. Here's the interesting part: While we can serve up multiple downloads to hit the 60mbps cap, we cannot get any single download to exceed 2.5M bytes/sec (20 Mbits/s). Is there any TCP or IIS tuning we can do to push up individual download speeds? Or something else to look at?

    Read the article

  • Why is there no 64-bit Linux Firefox build?

    - by Legooolas
    It seems that I have to build my own 64-bit Firefox for Linux, as Mozilla won't support it until Firefox 4. Why is this? It looks to me as though it works fine, although without some of the speed improvements to the Javascript engine which the 32-bit version gets. (Edit: Yes I could run the 32-bit version but I'm trying to keep my system clear of 32-bit cruft and libraries etc, and all the plug-ins worked fine in 3.0.11 64-bit unofficial builds.) Update : No longer relevant as Mozilla provide 64-bit builds, but they don't show them on the download pages of mozilla.org, just on the ftp site as mentioned in one of the answers below.

    Read the article

  • Dual 9500GT video cards, one works

    - by bossDub
    I have two video cards, both are PCIe 512MB Nvidia 9500GTs. One is an Evga and the other is another brand. If I put them both in, the one in the top slot will work (either card). The one in the lower slot says Code 12, not enough resources to use this device. I've tried disabling Firewire and a few other things in an attempt to get more "resources". Intel DP45SG motherboard. 4G Ram. 64bit Vista. Q8200 CPU. I do not have the SLI connector.

    Read the article

  • Fedora 16 Running Hot

    - by sdasdadas
    Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

    Read the article

  • What sort of things can cause a whole system to appear to hang for 100s-1000s of milliseconds?

    - by Ogapo
    I am working on a Windows game and while rendering, some computers will experience intermittent pauses ("hitches" for lack of a better term). When profiled they appear in seemingly random places in the code. Eventually I noticed that it wasn't just my process that was affected, but (seemingly) every process on the system. All of the threads in my application hitch at once. The CPU utilization drops during these hitches and it appears as if most processes make no progress. This leads me to believe this may be an Operating System or Driver issue, but it only occurs while playing the game (and only on some systems). What sort of operations might the operating system be doing that would require the kernel to pause all user threads and block. Some kind of I/O? At first I thought of paging but my impression is that would only affect a single process, no? Some systems in use: Windows, DirectX (3d), nVidia cards (unknown if replicates on ATI), using overlapped io for streaming

    Read the article

  • good books about server architecture?

    - by ajsie
    when the traffic for a website grows i dont think one apache server in a vps is the way to go. i would like to know more about how i then should set up the server side architecture. im not that much into hardware stuff (what kind of cables to use, different cpu architectures etc), but interested in the software architecture: what servers (apache, nginx, squid, varnish etc) to use and how they interact with each other one server in one machine? how many mysql servers. how many apache, nginx servers and so on. how the "machine court" looks like. are there any good books about this area?

    Read the article

  • How do I know if my disks are being hit with too much IO reads or writes or both?

    - by Mark F
    Hi All, So I know a bit about disk I/O and bottlenecks relating to this especially when relating to databases. But how do I really know what the max IO numbers will be for my disks? What metric might be available to me for working out roughly (but needs to be a good approximation) of how much capacity (if you will) have I got left available in I/O. I've seen it before where things are bubbling along nicely and then all of a sudden, everything screams to a halt, and it ends up being an IO bound problem. Is there a better way to predict when IO is reaching its limits? This article was interesting but not giving the answer I desire. "http://serverfault.com/questions/61510/linux-how-can-i-see-whats-waiting-for-disk-io". So is my best bet surrounding just looking at 'CPU IO WAIT'? There must be a more reactive method for this? Best, M

    Read the article

  • Dell Inspiron 530 - SSD Worth it?

    - by DrFredEdison
    I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

    Read the article

  • RCA monitor won't display highest resolution when NVidia drivers are installed

    - by novellterminator
    My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

    Read the article

  • Kernel Compiling from Vanilla to several machines

    - by Linux Pwns Mac
    When compiling kernels for machines is there a safe or correct way to create a template for say servers? I work with a lot of RHEL servers and want to compile them with GRSEC. However, I do not wish to always rebuild off of the .config for each machine and go in and remove a bunch of unrelated modules like wireless, bluetooth, ect... which you typically do not need in servers. I want to create a template .config that can be used on any machine, but is there a safe way to do that when hardware changes? I know with Linux, at least from my experience, you can cross jump hardware way easier then Windows/OSX. I assume that as long as I leave MOST of all the main hardware modules/CPU in that this could create a .config that would work for all or just about any machine?

    Read the article

  • ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

    - by user40944
    Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

    Read the article

  • games and movies become too slow after some time

    - by ishaq
    On my gaming desktop, I was fixing my desktop's power supply when something seemed to burn (I got that stinging burning smell). However when I turned ON the computer (it was OFF before), everything seemed to be fine. However, I have noticed that now it becomes too slow if I play a game or movie on it. I am talking about the computer becoming painfully slow after about 5 minutes into the movie/game (it works fine otherwise e.g. browsing), it becomes so slow I can see individual frames from movies/games. What could be the problem? A fried video card? friend memory (RAM), something else? My system's configuration is: Intel Core i7 CPU 3.40GHz 8GB DDR3 RAM 2TB WDC HDD NVIDIA GeForece GT 220 (1GB) Thermal Take Commander MS1 Chassis ( http://www.thermaltakeusa.com/Product.aspx?S=1394&ID=2051 ) mainboard: Intel DH67CL AAG10212-208 Realtek High Definition Audio

    Read the article

  • Problems with the backup

    - by marcodv
    I did a script which run around 4 o'clock in the morning, for backup all the mysql databases and the config file for 250 linux vm. The problem is that it tooks ages for complete and more than 50% of these vm, need more than 8 hours for complete. More or less all the vm had the same configuration,I mean Same amount of ram same amount of disk space same number of cpu Debian 6.0.5 I am saving these backup on amazon s3, because is the cheapest solutions that I've found. Now my questions is: Has anyone some solutions or suggestions about that? On one blog I've read that probably the ionice and nice combination could be good work around about that. any thought?

    Read the article

  • Is there other usage of Comcast extension cable and splitter?

    - by Tim
    I have an unused Comcast high-speed internet self-install kit from 2006. It has two coils of extension cable, and a splitter, and some screws. The name of the cable is "extension cable" printed on the package. I wonder if that is its actual name? As ethernet cables are always useful, I wonder if the extension cables are totally worthless and should be tossed into a trash can? Or are they usable for some other purposes, or even sellable? Thanks! SVI Digital SV-2G Splitter (5/1000MHz): One interface of the cables: Screws

    Read the article

  • Backup software for Ubuntu - which one?

    - by Industrial
    Hi everybody, I have spent some time testing out different backup solutions for my small home office during the last weeks, but still haven't found anything that have been working out too well yet. We can definitely work with a non-GUI script if that's what it takes, if only the requirements are fulfilled: Upload to Amazon S3 Europe. We get unbelievable slow uploading speed to US, so uploading 400+ GB of data will not be happening anytime this year... Incremental backups - only changed files shall be uploaded or we will have a big bill from Amazon in the end of each month.. Files should not be uploaded in one big per-folder archive. This is not efficient at all, since if we change one file in a subfolder, a huge two-digit GB sized file would have to be uploaded during next backup. Not good for economy again, or traffic overhead on our internet connection. What options are available to us? Thanks!

    Read the article

  • Isn't ethernet used for LAN?

    - by Alraxite
    I'm not really knowledgeable about networking stuff, hence the stupid question. I read that ethernet was used for LAN connections but I'm pretty sure what I'm currently using to connect to the internet is 'ethernet'. The only knowledge that I have about networking is that there are two types of internet connections: Dial-up and broadband. And broadband can be either DSL or cable. So where does ethernet come from? The only thing I can tell is that I have a DSL model and there is an ethernet port at the back of it, a cable from which runs to a port in the back of my CPU. So, can ethernet be used to connect to the internet? Is it a subtype of DSL? I'm really confused about this, so I would really appreciate if someone could explain this to me. Also, I will apologize if this isn't the right place to ask.

    Read the article

  • How to get rid of disturbance on LCD monitor?

    - by Uday Kanth
    I have an Acer G195HQL LCD monitor and recently I've been noticing a lot of disturbance on the screen. They appear to be like flickering horizontal white lines. These lines are more apparent on dark backgrounds like grey/black. The curious thing is that, the intensity of these lines increases and decreases with no specific pattern. The disturbance temporarily goes away when I detach and re-attach the VGA cable at the CPU end. My speakers are magnetically shielded, but the problem persists even when I turn them off. I don't know what to do and this is really annoying me. Is it possible that my monitor is failing? Or is there anything I should check?

    Read the article

  • Is it preferable to use POP or IMAP to check multiple google mail accounts from one?

    - by Adam Tuttle
    I have email accounts on several domains that use Google Mail, and thus far I've only ever used POP to send and receive mail from a single inbox. This is quite functional, and as long as I remember to select the appropriate FROM address when starting a new thread, mostly works without any additional thought: messages received on account A are replied to via account A, and so on. My only complaint is the lag -- I've seen sometimes as much as a half hour between messages arriving in an inbox before being imported into my primary inbox via POP. My question is this: Google also supports IMAP. Would that be in any way preferable over POP access? Reduced lag would be nice, but not at a general speed cost, if everything I do has to check another mailbox too.

    Read the article

  • Tool to create unscaled call-out from a thumbnail image?

    - by Mal Ross
    I'm creating an online tutorial for some software and need to include screenshots. In particular, I want to highlight the position and appearance of a given control in a large screen. Given that I haven't got the space to show the screen at full resolution (at least, not alongside the tutorial text), I figured I would use a kind of call-out from a thumbnail. Here's my poor first effort, made in Paint.NET: Given how long this took me to craft, I'd really like to find a tool to speed things up (and make them look a little more professional!). Preferably a free one, too - or one that has a downloadable trial. The exact style it produces isn't that important, provided it achieves the desired effect. Can anyone help me out? Thanks, Mal. P.S. I'm using Windows Vista.

    Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >