Search Results

Search found 26524 results on 1061 pages for 'laptop display'.

Page 284/1061 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >

  • Apache server in raspberry PI not visible from outside( public IP)

    - by Kronos
    I have made a fresh install of Arch Linux ARM into a Raspberry PI and I mounted there a LAMP, all fresh. I have another Arch(x86) in my laptop with Apache also there, and as far as I know, two web servers cannot run in the same network segment so, the problem is as follows. I my laptop, having Apache running, if I enter via the public ip of my network everything turns ok and I can see my website but, (obviously turning this server down) if I enter from the public IP with the Apache running in the raspberry pi( yes, only that Apache running) i cannot see my website in there. Also, if I access via local network it is a normal success, I can see my website. So, I can enter my raspberry website only via local but in my other web server i can enter it via local and public. I have the same conf files in both of them so what is the difference? I was planning in making the rpi as a development server. Thanks in advance

    Read the article

  • Where is custom icon information stored in Mac OS X Snow Leopard?

    - by AmazingRobie
    I have an external Lacie hard drive connected via USB to my Macbook Pro which is running Snow Leopard. I have nothing but music on the external drive with every album sorted in it's own individual folder and have changed all of the individual folder icons to display the album art of the songs from the album inside. I want to reformat my laptop, but I'm afraid if I do that, the album art will disappear if it's stored on a system file within the main hard drive OS. My question is this, is the information which tells the OS to display the album art listed in a hidden system file on the external Lacie drive or my laptop hard drive and if I reformat will I have to reassociate all of the album art to the folders on the external or will it keep it's associations. Thanks in advance.

    Read the article

  • How can I run Gnome or KDE locally in Cygwin?

    - by John Peter Thompson Garcés
    Apparently it is possible to do this using cygwin ports, as can be seen in screenshots. I followed this how-to to get apt-cygports set up, and I used it to install gnome-session. This how-to supposedly gives the commands needed to run Gnome or KDE, but whenever I try to run Gnome, a blank X-window pops up and then quickly disappears. Here is the terminal output: $ startx /usr/bin/dbus-launch gnome-session xauth: file /home/jpthomps/.serverauth.4168 does not exist Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 1.10.3.0 OS: Windows 7 Service Pack 1 [Windows NT 6.1 build 7601] (WoW64) Package: version 1.10.3-12 built 2011-08-22 XWin was started with the following command line: /usr/bin/X :0 -auth /home/jpthomps/.serverauth.4168 (II) xorg.conf is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information LoadPreferences: /home/jpthomps/.XWinrc not found LoadPreferences: Loading /etc/X11/system.XWinrc LoadPreferences: Done parsing the configuration file... winDetectSupportedEngines - DirectDraw installed, allowing ShadowDD winDetectSupportedEngines - Windows NT, allowing PrimaryDD winDetectSupportedEngines - DirectDraw4 installed, allowing ShadowDDNL winDetectSupportedEngines - Returning, supported engines 0000001f winSetEngine - Using Shadow DirectDraw NonLocking winScreenInit - Using Windows display depth of 32 bits per pixel winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff Screen 0 added at virtual desktop coordinate (0,0). MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 winPointerWarpCursor - Discarding first warp: 637 478 (--) 5 mouse buttons found (--) Setting autorepeat to delay=500, rate=31 (--) Windows keyboard layout: "00000409" (00000409) "US", type 4 (--) Found matching XKB configuration "English (USA)" (--) Model = "pc105" Layout = "us" Variant = "none" Options = "none" Rules = "base" Model = "pc105" Layout = "us" Variant = "none" Options = "none" winBlockHandler - pthread_mutex_unlock() winProcEstablishConnection - winInitClipboard returned. winClipboardProc - DISPLAY=:0.0 winClipboardProc - XOpenDisplay () returned and successfully opened the display. xinit: XFree86_VT property unexpectedly has 0 items instead of 1 xinit: connection to X server lost waiting for X server to shut down winClipboardProc - winClipboardFlushWindowsMessageQueue trapped WM_QUIT message, exiting main loop. winClipboardProc - XDestroyWindow succeeded. winClipboardProc - Clipboard disabled - Exit from server winDeinitMultiWindowWM - Noting shutdown in progress

    Read the article

  • How do I align the bottom edges of two monitors with xrandr?

    - by denaje
    I have two outputs that I'd like to use on my laptop: LVDS1 - 1366x768 HDMI1 - 1920x1080 I set my monitors up like so: xrandr --output LVDS1 --auto --output HDMI1 --auto --right-of LVDS1 This is all well and good, but my laptop sits considerably lower than my external monitor, and with the top edges of the screens being aligned, it makes the jump from one screen to the other rather unintuitive. Is there a way I can align the bottom edges instead? I thought I could use the --pos flag to do this, but I have tried and not seen any difference (perhaps I do not know how to use it properly). EDIT: Solved. Thanks to tink's link, I deconstructed the Python script and discovered the way to do this is as follows: xrandr --output LVDS1 --pos 0x312 # 312 = 1280 - 768 xrandr --output HDMI1 --pos 1366x0 Not sure I understand exactly what the --pos flags are doing here, but it at least works!

    Read the article

  • Dell Vostro 1000 w/fresh XP Pro installation running very slow

    - by ssvarc
    I'm working on a Dell Vostro 1000 laptop. It was running slowly and hanging, antivirus scans turned up nothing and the same with the Dell diagnostics (DFT hung - but Dell's diagnostics gave the HD a pass) so I imaged the HD and installed XP Pro on it. The laptop is still slow! (It takes a noticeable delay to enter words into the Google search box in IE and the computer hangs every time it enters the XP screensaver.) What are the likely possibilities at this point and how would I go about checking for them?

    Read the article

  • HP LasterJet P2035 not mapping on remote desktop

    - by Matthew Pomar
    I am connecting from a Windows 7 Pro laptop to a remote 64bit Windows 2008 R2 server via Remote Desktop. My local laptop has a networked HP LaserJet P2035 printer set as the default printer. When I connect to the server, the local (networked) HP printer does not get mapped on the server. I've installed the 64bit drivers from HP for the printer and was able to create a test printer on the server itself using the correct driver (HP LaserJet P2035) priting to a file. I've also checked the Printer under Local Resources tab on my Remote Desktop client. Does anyone know where else I should check to get my local printer to make to my remote desktop session?

    Read the article

  • Transferring Windows XP Mode VM to Another Machine?

    - by Omar Kooheji
    I've been running Windows XP mode on my Windows 7 Laptop for a while now and I've got my VM set up just how I like it. I am switchign laptops due to an intermittent hardware failure. Is it possible to transfer my Windows XP mode VM to my new laptop? I know it's just a Windows Virtual PC VM, how would I go about transferring it if this is possible? Will the Fact that I'm moving from Windows 7 Ultimate to Windows 7 Pro make a difference? AFAIK they both support Windows XP Mode.

    Read the article

  • Ubuntu - connecting 3rd monitor fails with "xrandr: cannot find crtc for output DVI-0"

    - by MDCore
    I've got a laptop with a DVI and VGA output on the back. With everything connected it will only allow me to run 2 of the 3 monitors e.g. laptop display + VGA or DVI+VGA but not all 3. xrandr says I have 2 CRTC's, 0 and 1. The internet says I should be able to share a CRTC if the modeline is the same, and my 2 external monitors are the exact same make and model. How do I convince the software to drive all this hardware?

    Read the article

  • DNS resolution not working on Browsers but on Shell

    - by Shyam Sunder Verma
    Running dig/ping on any domain, give me correct ip. When I try to browse google.com in browser it does not work. When I pick the IP (via ping) and use it in browser, website open via IP fine. But further work does not work, because of name resolution problem. DO NOT works fine on : Ubuntu 9.10 installed in Virtual Box over Windows. Ubuntu 10.10 installed in Virtual Box over Windows. Ubuntu 9.10 installed on laptop. But Internet works fine on windows vista installed on laptop.

    Read the article

  • ATI video cards - unable to use entire monitor (1080p)

    - by Walter White
    Hi all, I have a Dell s2409w, 24" 1080p monitor. With nVidia, I would plug-in the monitor and voila, it automatically knew it was 1080p (1920x1080). I have both a Windows laptop and Ubuntu laptop. Neither is capable of using the fullscreen even though the monitor reports the input is 1080p. I am connecting the monitors via HDMI, is there a 'special' setting I am missing to make this work? Otherwise, I like the performance of my ATI video cards, the drivers seem to be stable and reliable. Thanks, Walter

    Read the article

  • Data Recovery needed with a Sector Zero problem on a HDD

    - by Jay Robins
    Left my computer (running XP) copying files to an external drive. Came back a few hours later, and the laptop was pretty hot and had frozen (Ironic aint it). Forced a reboot, and the laptop HDD hasnt worked since. Set it up in an external enclosure, but XP cant mount the HDD to a drive letter, but is able to recognize the manufacturer and drive size (Hitachi-320GB). No noise or rattling when the drive is spinning, but I cant get anything off of it, since i cant mount it, or see much of anything. Computer repair shop ran some software tests and says it came back with a "Zero Sector bad" message, and need to send it to a professional data recovery service. Any other options or ideas, before I have to spend thousands of dollars to recover my data? Any help would be GREATLY appreciated!!! I'm desperate and a poor student! Thanks in Advance, -Jay

    Read the article

  • Chrome's new window disappear from desktop

    - by faulty
    I'm having this problem with Chrome on a Windows 7 x86 machine. I'm using Chrome for a locally hosted intranet web app. In the web app, there's frequent use of new window which popup, which works like a dialog box for the app. The problem started since yesterday. All the new windows doesn't appear on top and no where to be found on the desktop. But it does appear on the taskbar. Clicking the button on the taskbar doesn't bring up the window as well. I've also tried Alt+Space, then Move, it doesn't work. I only found 2 way to bring it up, Maximize or Show as tab. What could have caused this and how should I fix it? Thanks EDIT: I've configure to not group taskbar buttons. EDIT: I've just gone through the javascript of the button, it call window.open to display the popup. I can see the popup flicker and disappear. If I step through the code, the popup will display properly, sometime. Also, if I click the button twice, it will also display the popup, but at a much smaller size, less than 100x100

    Read the article

  • Sharing internet connection over VPN in Windows XP

    - by Nigel Hawthorne
    How can I share my internet connection with VPN clients using the Windows XP built-in VPN server? I want to be able to use my home internet connection (on an XP machine) from my anywhere using my laptop (Windows 7 machine). The built-in VPN server in XP and the VPN client in Windows 7 seem to do a great job of giving me access to both machines securely over the internet, but I cannot find a way to use ICS in conjunction with the incoming connection to give access to my home internet connection to my laptop remotely. Is there a way to do this? or is there an alternative VPN server software that is not limited to only local access?

    Read the article

  • Looking for an application that scrolls or pans netbook screens running Windows

    - by Rob
    I'm looking for a Windows 7 and XP compatible Windows desktop panning/scrolling tool. This is to solve a problem where some applications for example MSN have settings/preference Windows that are not resizeable. I have a Netbook with a small maximum screen resolution e.g. 1024x600. The fixed non-resizeable windows are too large for this display screen size so I cannot see all of the items on these windows, particularly the OK button to save settings. What I would like is a desktop scrolling/panning tool where if I move my mouse pointer to any edge of the display, it pans to show the region of the too-large-fixed window that I could not see. I use a Samsung N110 and Toshiba NB100 netbooks. I'm looking for: A general program that provides desktop panning/scrolling/expanded resolution to allow all regions of a non-resizeable fixed window Preferably a non-graphics hardware specific program but will accept a solution that works with both the above machines I'm NOT looking for (i.e. unsatisfactory answers others have asked that I've already searched and found): Advice on what programs to use that DON'T have the problem of fixed windows Alternative operating system solutions Plugging in an external monitor with larger resolution - I use this option but I need a solution when one is not available, e.g. while travelling etc Advice about not using small screen netbooks - I enjoy the compact convenience of them Advice about change the dpi settings in the Control Panel Display settings Advice about guesswork with the tab key to move the focus the off-screen item I cannot see Thank you in advance.

    Read the article

  • Can a file change size when the transfer protocol changes?

    - by djechelon
    I am very curious about what I have just found happening on my computers. I have set up SyncBackPro to synchronize a music folder from my home desktop to my laptop using Windows network share (SMB). Files get synchronized regularly. Now I tried to switch to FTP and I noticed that NO FILE matches its counterpart even if they have never been modified (I make sure there is the readonly flag and no application is allowed to retag MP3s and whatever...), so SyncBack asks me what side should overwrite the other. FTP files are a little larger than local files. I run synchronization from the laptop. How can such a thing happen? Files are the same, bytes should be the same... If I run SMB sync again it matches all the files again.

    Read the article

  • Accessing SQL Server in Windows XP Mode Virtual Pc

    - by DavidStein
    I have a laptop running 64bit Windows 7 Ultimate. I created a Virtual PC using Microsoft XP Mode. I've installed SQL Server 2000 on the Virtual Machine. I have SQL Server 2008 R2 installed on the Windows 7 machine (laptop). I can browse to the SQL 2000 instance (it sees it), but I cannot successfully connect using either Windows or SQL Server Authentication. I don't get an error, the attempt just times out. I have the Windows XP Mode Firewall turned off, and there doesn't appear to be anything in the Event logs either. Any ideas how I can query the XP Mode SQL Server from the Windows 7 machine?

    Read the article

  • Music but no voices on headphones

    - by TheEmeritus
    I have a laptop with Windows 7 and I have headphones for a couple of months, and only recently they started to play only the music, while the voices are there, but just very faint. I tried to connect them to another computer (PC, windows XP) and they worked fine, which made me think the problem isn't with the headphones but with the laptop. I've searched online and found a few solutions, none of the seemed to work. Such as: plugging in and out my jack until you can hear better, checking the headphones on other computers. Other relevant info: The headphones come with a mic if I right click the sound icon - sound devices. Then I dont see any 'headphones', not even if I tell it to show disabled devices. All I see is a 'speakers' icon, yet it's there even if the headphones are disconnected, and is always active. So if anyone has any idea I'd appreciate it :) Thanks!

    Read the article

  • What does this mean: "SATP VMW_SATP_LOCAL does not support device configuration"?

    - by Jason Tan
    Can anyone tell me what this means in ESXi 5.1?: SATP VMW_SATP_LOCAL does not support device configuration I've googled it and I get a lot of results, but as yet all the pages that contain the string are discussing other matters. The storage array is a HDS HUS-VM and the hosts are HP b460c G8 blades with flex fabric and flex fabric VCs which I am in the process of commissioning and would like to get it started on the right foot - i.e. error and warning free! naa.600508b1001c56ee3d70da65f071da23 Device Display Name: HP Serial Attached SCSI Disk (naa.600508b1001c56ee3d70da65f071da23) Storage Array Type: VMW_SATP_LOCAL Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration. Path Selection Policy: VMW_PSP_FIXED Path Selection Policy Device Config: {preferred=vmhba0:C0:T0:L1;current=vmhba0:C0:T0:L1} Path Selection Policy Device Custom Config: Working Paths: vmhba0:C0:T0:L1 Is Local SAS Device: true Is Boot USB Device: false This is the same LUN: ~ # esxcli storage core device list -d naa.60060e80132757005020275700000016 naa.60060e80132757005020275700000016 Display Name: HITACHI Fibre Channel Disk (naa.60060e80132757005020275700000016) Has Settable Display Name: true Size: 204800 Device Type: Direct-Access Multipath Plugin: NMP Devfs Path: /vmfs/devices/disks/naa.60060e80132757005020275700000016 Vendor: HITACHI Model: OPEN-V Revision: 5001 SCSI Level: 2 Is Pseudo: false Status: degraded Is RDM Capable: true Is Local: false Is Removable: false Is SSD: false Is Offline: false Is Perennially Reserved: false Queue Full Sample Size: 0 Queue Full Threshold: 0 Thin Provisioning Status: unknown Attached Filters: VAAI_FILTER VAAI Status: supported Other UIDs: vml.020001000060060e801327570050202757000000164f50454e2d56 Is Local SAS Device: false Is Boot USB Device: false ~ #

    Read the article

  • Macbook Pro Multiple Monitor Problem

    - by thinksocrates
    I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

    Read the article

  • TrueCrypt & upgrading your hard drive?

    - by Danielb
    I currently use TrueCrypt to encrypt the hard drive in a Win7 laptop (everything in a single partition). I am looking to upgrade the hard drive to a model with significantly more storage capacity. I've had a look through the documentation but I couldn't see anything about this particular scenario. I assume I need to do something like the following: Remove the encryption from the existing drive. Clone the existing drive image onto the new hard drive. Physically install the new drive into the laptop. Resize the single partition to use all the space in the new drive. Encrypt all of the new bigger drive with TrueCrypt.

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • remote desktop over wireless

    - by tbischel
    So I'm trying to run remote desktop on my laptop to connect to my home desktop. I have a problem where this works fine if I connect my laptop with an ethernet cable, but fails when I try to use wireless internet access (which works fine for normal internet surfing). I've experienced this problem at home with my wireless router, and at work with the wireless network they have there, so I'm inclined to believe that its a setting local to my machine rather than the router blocking the requests... but I'm not sure where to look. Any suggestions?

    Read the article

  • Remote host: can tracert, can telnet, can*not* browse: what gives?

    - by MacThePenguin
    One of my customers of the company I work for has made a change to their Internet connection, and now we can't connect to them any more from our LAN. To help me troubleshoot this issue, the network guy on the customer's site has configured their firewall so that a HTTPS connection to their public IP address is open to any IP. I should put https://<customer's IP> in my browser and get a web page. Well, it works from any network I've tried (even from my smartphone), just not from my company's LAN. I thought it may be an issue with our firewall (though I checked its rules and it allows outbound TCP port 443 to anywhere), so I just connected a PC directly to the network connection of our provider, bypassing out firewall completely, and still it didn't work (everything else worked). So I asked for help to our Internet provider's customer service, and they asked me to do a tracert to our customer's IP. The tracert is successful, as the final hop shown in the output is the host I want to reach. So they said there's no problem. :( I also tried telnet <customer's IP> 443 and that works as well: I get a blank page with the cursor blinking (I've tried using another random port and that gives me an error message, as it should). Still, from any browser of any PC in my LAN I can't open that URL. I tried checking the network traffic with Wireshark: I see the packages going through and answers coming back, thought the packets I see passing are far less than they are if I successfully connect to another HTTPS website. See the attached screenshot: I had to blur the IPs, anyway the longer string is my PC's local IP address, the shorter one is the customer's public IP. I don't know what else to try. This is the only IP doing this... Any idea what could I try to find a solution to this issue? Thanks, let me know if you need further details. Edit: when I say "it doesn't work" I mean: the page doesn't open, the browser keeps loading for a long time and eventually shows an error saying that the page cannot be opened. I'm not in my office now so I can't paste the exact message, but it's the usual message you get when the browser reaches its timeout. When I say "it works", I mean the browser loads and shows a webpage (it's the logon page for the customers' firewall admin interface: so there's the firewall brand's logo and there are fields to enter a user id and a password). Update 13/09/2012: tried again to connect to the customer's network through our Internet connection without a firewall. This is what I did: Run a Kubuntu 12.04 live distro on a spare laptop; Updated all the packages I could and installed WireShark; Attached it to my LAN and verified that I couldn't open https://<customer's IP>. Verified that the Wireshark trace for this attempt was the same as the one I've already posted; Verified that I could connect to another customer's host using rdesktop (it worked); Tried to rdesktop to <customer's IP>, here's the output: kubuntu@kubuntu:/etc$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: recv: Connection reset by peer Disconnected the laptop from the LAN; Disconnected the firewall from the Extranet connection, connected the laptop instead. Set its network configuration so that I could access the Internet; Verified that I could connect to other websites in http and https and in RDP to other customers' hosts - it all worked as expected; Verified that I could still traceroute to <customer's IP>: I could; Verified that I still couldn't open https://<customer's IP> (same exact result as before); Checked the WireShark trace for this attempt and noticed a different behaviour: I could see packets going out to the customer's IP, but no replies at all; Tried to run rdesktop again, with a slightly different result: kubuntu@kubuntu:/etc/network$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: <customer's IP>: unable to connect Finally gave up, put everything back as it was before, turned off the laptop and lost the WireShark traces I had saved. :( I still remember them very well though. :) Can you get anything out of it? Thank you very much. Update 12/09/2012 n.2: I followed the suggestion by MadHatter in the comments. From inside the firewall, this is what I get: user@ubuntu-mantis:~$ openssl s_client -connect <customer's IP>:443 CONNECTED(00000003) If I now type GET / the output pauses for several seconds and then I get: write:errno=104 I'm going to try the same, but bypassing the firewall, as soon as I can. Thanks. Update 12/09/2012 n.3: So, I think ISA Server is altering the results of my tests... I tried installing Wireshark directly on the firewall and monitoring the packets on the Extranet network card. When the destination is the customer's IP, whatever service I try to connect to (HTTPS, RDP or SAProuter), I can only see outbound packets and no response packets whatsoever from their side. It looks like ISA Server is "faking" the remote server's replies, that's why I get a connection using telnet or the openSSL client. This is the wireshark trace from inside our LAN: But this is the trace on the Extranet network card: This makes a bit more sense... I'll send this info to the customer's tech and see if he can make anything out of it. Thanks to all that took the time to read my question and post suggestions. I'll update this post again.

    Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >