Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 285/306 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• USB ports causing Wireless and Mobile Phone tethering drop out

  - by chrolli

  I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

  Read the article

• Windows 7 x64 installation freezes on new PC build

  - by jhsowter

  Symptoms While attempting to install Windows 7 (64 bit) on my new PC build, it freezes usually at the point where it is expanding the windows image, but has frozen as early as accepting the licence agreement, and as late as just after the first restart. My specs are at the bottom of the post. So far I have tried the following to identify the problem, in rough chronological order: Tried different hard drives with different sata cables. Same symptoms. I later used a different computer to install windows on the same hard drive with no problems. Tried the RAM in different slots, and tried one RAM stick instead of two. Same symptoms. Updated the BIOS to 1.60. Same symptoms. Ran Memtest86+ with RAM in dual channel. It passed about 6 times when I left it running overnight. Used USB to install windows instead of an optical drive. Same symptoms. Change SATA configuration from AHCI to IDE. Same symptoms. Tried various different SATA ports. Same symptoms. Updated BIOS to 1.70. Same symptoms. I saw the RAM did not list my motherboard as being supported even though the motherboard did list the RAM as being supported. So I tried some Kingston DDR3 1333MHz RAM instead. Same symptoms. Other (possibly) pertinent information My CPU idles at about 30 °C. I can't tell what it gets to when it's working. When I installed the CPU, the lever which locks the CPU in place took quite a bit of force to pull down. Now I didn't just yank it down without rechecking the CPU was seated properly about 5 times, but it does seems unusual, and I wonder if the CPU was seated badly if I would see these symptoms? I am out of ideas and don't know how to diagnose any further. I suppose either the motherboard or CPU must be the problem. I am on the verge of taking it to a specialist. The Question How should I proceed from here? Is there anything I can rule out as being the source of the symptoms I am seeing? My Specs CPU: Intel i5 3570k RAM: G.Skill RipjawsX 8GB kit HDD: single 3.5" 500GB SATA or 160GB 2.5" SATA (at different times and sometime together. But no RAID or anything). MB: ASRock Extreme4 Z77 PSU: Silverstone Strider Plus 600W ST60F-P

  Read the article

• Moving windows-2003 hdd into virtual machine - with HDD shrink

  - by jm666

  Before you vote to close as exact duplicate, please read the full question. I was already read: Can I make a virtual machine out of a Windows XP physical machine? Disk2vhd,convert my PC to Hyper-V Virtual Machine Creating a Windows Virtual PC image from a Physical machine physical machine to virtual machine and place into VirtualBox BSOD trying to migrate Windows XP from a physical to a virtual machine http://en.wikipedia.org/wiki/Physical-to-Virtual and all other similiar questions here and several external sites too Unfortunately, don't find answer for my problem. I have an physical machine with 500GB HDD, on what is installed old Windows-2003 server with one server application. The application is like the windows itself, too old, no support for it today, haven't installation media and so on.. ;( On the HDD it is used only approx. 100MB (maybe less when will delete all unnecessary files). Want convert the the machine into the VirtualBox, and the VirtualBox should run on the same machine. Is possible to do this with the next steps? I can attach another HDD (via USB or internally) Boot an live Linux from CD, mount HDDs Run "something" on the Linux (the above wikipedia article have many pointer for the SW) for the conversion and store the image on the USB HDD - unfortunately, many of tools uses some specialty what exists in Windows-XP and above. No informations about Windows-2003 server, so what is an working solution for Windows-2003? try boot the virtual image with VirtualBox when it will run ok, remove the old installation, install Linux on the old 500GB hdd, copy the image and run.. The above should works (i hope), but the problems: i currently have only 320GB external USB hdd. (ofc, i can remove it from a box and enter it as internal HDD too) so, for the conversion I looking for the on the fly HDD shrink, so while moving the physical 500GB HDD need shrink it into smaller HDD - as i told above, only 100MB is used Exists something for this? (free) - or the only way is buying and larger 1TB hdd and using it for the conversion? Another question are: is anybody have real experience with windows-2003 conversion into VirtualBox? Looking for an answer from someone who really doing it and can figure out real pitfalls. (googling can do myself). exists here better approach for the solution?

  Read the article

• DKIM error: dkim=neutral (bad version) header.i=

  - by GBC

  Ive been struggling the last couple of hours with setting up DKIM on my Postfix/CentOS 5.3 server. It finally sends and signs the emails, but apparently Google still does not like it. The errors I'm getting are: dkim=neutral (bad version) [email protected] from googles "show original" interface. This is what my DKIM-signature header look like: v=1; a=rsa-sha1; c=simple/simple; d=mydomain.com.au; s=default; t=1267326852; bh=0wHpkjkf7ZEiP2VZXAse+46PC1c=; h=Date:From:Message-Id:To:Subject; b=IFBaqfXmFjEojWXI/WQk4OzqglNjBWYk3jlFC8sHLLRAcADj6ScX3bzd+No7zos6i KppG9ifwYmvrudgEF+n1VviBnel7vcVT6dg5cxOTu7y31kUApR59dRU5nPR/to0E9l dXMaBoYPG8edyiM+soXo7rYNtlzk+0wd5glgFP1I= Very appreciative of any suggestions as to how I can solve this problem! Btw, here is exactly how I installed dkim-milter in CentOS 5.3 for postfix, if anyone is interested (based on this guide): mkdir dkim-milter cd dkim-milter wget http://www.topdog-software.com/oss/dkim-milter/dkim-milter-2.8.3-1.x86_64.rpm ======S====== Newest version: http://www.topdog-software.com/oss/dkim-milter/ ======E====== rpm -Uvh dkim-milter-2.8.3-1.x86_64.rpm /usr/bin/dkim-genkey -r -d mydomain.com.au ======S====== add contents of default.txt to DNS as TXT _ssp._domainkey TXT dkim=unknown _adsp._domainkey TXT dkim=unknown default._domainkey TXT v=DKIM1; g=*; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GWETBNiQKBgQC5KT1eN2lqCRQGDX+20I4liM2mktrtjWkV6mW9WX7q46cZAYgNrus53vgfl2z1Y/95mBv6Bx9WOS56OAVBQw62+ksXPT5cRUAUN9GkENPdOoPdpvrU1KdAMW5c3zmGOvEOa4jAlB4/wYTV5RkLq/1XLxXfTKNy58v+CKETLQS/eQIDAQAB ======E====== mv default.private default mkdir /etc/mail/dkim/keys/mydomain.com.au mv default /etc/mail/dkim/keys/mydomain.com.au chmod 600 /etc/mail/dkim/keys/mydomain.com.au/default chown dkim-milt.dkim-milt /etc/mail/dkim/keys/mydomain.com.au/default vim /etc/dkim-filter.conf ======S====== ADSPDiscard yes ADSPNoSuchDomain yes AllowSHA1Only no AlwaysAddARHeader no AutoRestart yes AutoRestartRate 10/1h BaseDirectory /var/run/dkim-milter Canonicalization simple/simple Domain mydomain.com.au #add all your domains here and seperate them with comma ExternalIgnoreList /etc/mail/dkim/trusted-hosts InternalHosts /etc/mail/dkim/trusted-hosts KeyList /etc/mail/dkim/keylist LocalADSP /etc/mail/dkim/local-adsp-rules Mode sv MTA MSA On-Default reject On-BadSignature reject On-DNSError tempfail On-InternalError accept On-NoSignature accept On-Security discard PidFile /var/run/dkim-milter/dkim-milter.pid QueryCache yes RemoveOldSignatures yes Selector default SignatureAlgorithm rsa-sha1 Socket inet:20209@localhost Syslog yes SyslogSuccess yes TemporaryDirectory /var/tmp UMask 022 UserID dkim-milt:dkim-milt X-Header yes ======E====== vim /etc/mail/dkim/keylist ======S====== *@mydomain.com.au:mydomain.com.au:/etc/mail/dkim/keys/mydomain.com.au/default ======E====== vim /etc/postfix/main.cf ======S====== Add: smtpd_milters = inet:localhost:20209 non_smtpd_milters = inet:localhost:20209 milter_protocol = 2 milter_default_action = accept ======E====== vim /etc/mail/dkim/trusted-hosts ======S====== localhost 127.0.0.1 ======E====== /etc/mail/local-host-names ======S====== localhost 127.0.0.1 ======E====== /sbin/chkconfig dkim-milter on /etc/init.d/dkim-milter start /etc/init.d/postfix restart

  Read the article

• backup of KVM VM's running on Ubuntu 12.4.1 precise edition from a remote machine

  - by Dr. Death

  I am creating a library API which will take the backup of all the VM's running on KVM hypervisor. My VM's can be of any type. I am taking this backup from a remote machine and need to put the backup at remote server. I have KVM, Libvirt installed on my system. Some of my VM's are LVM based and some are normal VM's running on KVM. I research and found out an excellent perl script for taking the backup http://pof.eslack.org/2010/12/23/best-solution-to-fully-backup-kvm-virtual-machines/ but since I am developing this library in C++ I cannot use it however it has given me a good understanding of how it will work. One thing I didnot able to sort out is if my VM's are not created using virt-manager or are created using any other tool them virsh system list command does not give them in the list of running VM's however they are running perfectly on my KVM server. Is there a way to list these VM's in my system list anyhow? secondly, when I am taking backup from the remote machine I am getting out of my ssh mode as soon as my libvirt command finishes and for every command I need to ssh again, Is there a way that I do not need to ssh each and every time? I have already used the rsa key for ssh but when once my command finishes my control moves to the remote machine again and try to find out my source VM location in remote machine's local drives which in turn fails it. here is the main problem I am facing. also for the LVM based VM I am able to take the live backup but for non LVM based my machines are getting suspended and not been able to take the live backup. Since my library will work on the remote machine only I might not know the VM's configruation on the KVM server. so need to make it consistent for all the VM's. Please share any thing related to this issue so that I may be able to take the live backup of the non lvm vm's also. I'll update my working and any research findings time to time to all of you. Thanks in advance for your suggestions in these regards.

  Read the article

• !! 0xc01a00d !! aka Vista won't boot

  - by Chris

  Answer: Parts of the hard drive are corrupted. All of my user's code was checked in, so I'm just going to format the box. One of my users has an HP DV5-1235dx laptop running Windows Vista Professional x64. Last night, our WSUS server pushed out a few updates including "Security Update for Windows Vista for x64-based Systems (KB960859)". When we try to boot the laptop today, a black screen with white text comes up displaying: xxx/169894 (something) Where xxx increments rapidly and something is some dll or registry key. Eventually that stops and the screen displays !! 0xc01a00d !! 35566/169894 (\Registry\Machine\COMPONENTS\DerivedDat...) No other computers that received this update are displaying the same error. So far I've tried running CHKDSK off of HBCD. It repaired a thing or two, but the computer still doesn't boot. I tried repairing the Windows install from the Vista CD, but I get a black screen with white text displaying something along the lines of: 0 No Emulation System Type 00 1 No Emulation System Type 00 Select one of the above Booting in Last Known Good Configuration doesn't work. Booting in Safe Mode freezes at Loading Windows Files [snip] Loaded: \windows\system32\drivers\crcdisk.sys Please wait... My next step is trying to boot Safe Mode with Command Prompt and try to run rstrui.exe. While I do that, does anybody have any guidance? Edit: Booting into Safe Mode with Command Prompt will not work. See Booting in Safe Mode above. Edit 2: I managed to boot from the Vista DVD. I ran the system repair, and now I get a black screen with white text saying: !! 0xc0000034 !! 290/169894 (_0000000000000000.cdf-ms) Edit 3: I ran the system repair again, and it attempted to repair my hard drive. It failed. Problem Signature: Problem Event Name: Startup Repair V2 Problem Signature 01: External Media Problem Signature 02: 6.0.6001.18000.6.0.6001.18000 Problem Signature 03: 4 Problem Signature 04: 196611 Problem Signature 05: CorruptVolume Problem Signature 06: NoBootFailure Problem Signature 07: 0 Problem Signature 08: 0 Problem Signature 09: unknown Problem Signature 10: 1168 OS Version: 6.0.6002.2.2.0.256.1 Locale ID: 1033 Answer: Parts of the hard drive are corrupted. All of my user's code was checked in, so I'm just going to format the box.

  Read the article

• ZFS/Btrfs/LVM2-like storage with advanced features on Linux?

  - by Easter Sunshine

  I have 3 identical internal 7200 RPM SATA hard disk drives on a Linux machine. I'm looking for a storage set-up that will give me all of this: Different data sets (filesystems or subtrees) can have different RAID levels so I can choose performance, space overhead, and risk trade-offs differently for different data sets while having a few number of physical disks (very important data can be 3xRAID1, important data can be 3xRAID5, unimportant reproducible data can be 3xRAID0). If each data set has an explicit size or size limit, then the ability to grow and shrink the size limit (offline if need be) Avoid out-of-kernel modules R/W or read-only COW snapshots. If it's a block-level snapshots, the filesystem should be synced and quiesced during a snapshot. Ability to add physical disks and then grow/redistribute RAID1, RAID5, and RAID0 volumes to take advantage of the new spindle and make sure no spindle is hotter than the rest (e.g., in NetApp, growing a RAID-DP raid group by a few disks will not balance the I/O across them without an explicit redistribution) Not required but nice-to-haves: Transparent compression, per-file or subtree. Even better if, like NetApps, analyzes the data first for compressibility and only compresses compressible data Deduplication that doesn't have huge performance penalties or require obscene amounts of memory (NetApp does scheduled deduplication on weekends, which is good) Resistance to silent data corruption like ZFS (this is not required because I have never seen ZFS report any data corruption on these specific disks) Storage tiering, either automatic (based on caching rules) or user-defined rules (yes, I have all-identical disks now but this will let me add a read/write SSD cache in the future). If it's user-defined rules, these rules should have the ability to promote to SSD on a file level and not a block level. Space-efficient packing of small files I tried ZFS on Linux but the limitations were: Upgrading is additional work because the package is in an external repository and is tied to specific kernel versions; it is not integrated with the package manager Write IOPS does not scale with number of devices in a raidz vdev. Cannot add disks to raidz vdevs Cannot have select data on RAID0 to reduce overhead and improve performance without additional physical disks or giving ZFS a single partition of the disks ext4 on LVM2 looks like an option except I can't tell whether I can shrink, extend, and redistribute onto new spindles RAID-type logical volumes (of course, I can experiment with LVM on a bunch of files). As far as I can tell, it doesn't have any of the nice-to-haves so I was wondering if there is something better out there. I did look at LVM dangers and caveats but then again, no system is perfect.

  Read the article

• Detecting upload success/failure in a scripted command-line SFTP session?

  - by Will Martin

  I am writing a BASH shell script to upload all the files in a directory to a remote server and then delete them. It'll run every few hours via a CRON job. My complete script is below. The basic problem is that the part that's supposed to figure out whether the file uploaded successfully or not doesn't work. The SFTP command's exit status is always "0" regardless of whether the upload actually succeeded or not. How can I figure out whether a file uploaded correctly or not so that I can know whether to delete it or let it be? #!/bin/bash # First, save the folder path containing the files. FILES=/home/bob/theses/* # Initialize a blank variable to hold messages. MESSAGES="" ERRORS="" # These are for notifications of file totals. COUNT=0 ERRORCOUNT=0 # Loop through the files. for f in $FILES do # Get the base filename BASE=`basename $f` # Build the SFTP command. Note space in folder name. CMD='cd "Destination Folder"\n' CMD="${CMD}put ${f}\nquit\n" # Execute it. echo -e $CMD | sftp -oIdentityFile /home/bob/.ssh/id_rsa [email protected] # On success, make a note, then delete the local copy of the file. if [ $? == "0" ]; then MESSAGES="${MESSAGES}\tNew file: ${BASE}\n" (( COUNT=$COUNT+1 )) # Next line commented out for ease of testing #rm $f fi # On failure, add an error message. if [ $? != "0" ]; then ERRORS="${ERRORS}\tFailed to upload file ${BASE}\n" (( ERRORCOUNT=$ERRORCOUNT+1 )) fi done SUBJECT="New Theses" BODY="There were ${COUNT} files and ${ERRORCOUNT} errors in the latest batch.\n\n" if [ "$MESSAGES" != "" ]; then BODY="${BODY}New files:\n\n${MESSAGES}\n\n" fi if [ "$ERRORS" != "" ]; then BODY="${BODY}Problem files:\n\n${ERRORS}" fi # Send a notification. echo -e $BODY | mail -s $SUBJECT [email protected] Due to some operational considerations that make my head hurt, I cannot use SCP. The remote server is using WinSSHD on windows, and does not have EXEC privileges, so any SCP commands fail with the message "Exec request failed on channel 0". The uploading therefore has to be done via the interactive SFTP command.

  Read the article

• Installing ImageMagick on Mac OSX 10.6

  - by Russell C.

  I just got a new Mac and am trying to setup a local Perl development environment. I'm using MAMP but also need the ImageMagick perl module installed in order to do some of the photo processing our scripts require. I tried installing ImageMagick manually but ran into some issues and after reading online a lot of people reported having issues going this route. The general consensus was to install it using MacPorts instead so I went ahead and installed MacPorts. Unfortunately, MacPorts can't seem to install it successfully either. Here is the command I'm using to try to install ImageMagick: sudo port install p5-perlmagick And here are all the errors reported during install: ---> Computing dependencies for p5-perlmagick ---> Building p5-perlmagick Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-perlmagick/work/PerlMagick-6.32" && /usr/bin/make -j2 all " returned error 2 Command output: Magick.xs:10918: error: 'struct Methods' has no member named 'exception' Magick.xs:10918: error: request for member 'severity' in something not a structure or union Magick.xs:10918: error: 'ErrorException' undeclared (first use in this function) Magick.xs:10919: error: 'struct Methods' has no member named 'exception' Magick.xs:10920: warning: implicit declaration of function 'GetImageException' Magick.xs:10922: error: 'struct PackageInfo' has no member named 'image_info' Magick.xs:10922: error: 'struct Methods' has no member named 'adjoin' Magick.xs:10929: error: request for member 'severity' in something not a structure or union Magick.xs:10929: error: 'UndefinedException' undeclared (first use in this function) Magick.xs:10929: error: request for member 'severity' in something not a structure or union Magick.xs:10929: error: request for member 'reason' in something not a structure or union Magick.xs:10929: error: request for member 'severity' in something not a structure or union Magick.xs:10929: error: request for member 'reason' in something not a structure or union Magick.xs:10929: warning: pointer/integer type mismatch in conditional expression Magick.xs:10929: error: request for member 'description' in something not a structure or union Magick.xs:10929: error: request for member 'description' in something not a structure or union Magick.xs:10929: error: request for member 'severity' in something not a structure or union Magick.xs:10929: error: request for member 'description' in something not a structure or union Magick.xs:10929: warning: pointer/integer type mismatch in conditional expression Magick.xs:10929: error: request for member 'description' in something not a structure or union Magick.xs:10929: warning: passing argument 2 of 'Perl_sv_catpv' from incompatible pointer type Magick.xs:10929: warning: unused variable 'message' Magick.xs:10856: warning: unused variable 'filename' Magick.c:10784: warning: unused variable 'ref' Magick.c:10777: warning: unused variable 'ix' Magick.xs: In function 'boot_Image__Magick': Magick.xs:2122: warning: implicit declaration of function 'InitializeMagick' Magick.xs:2123: warning: implicit declaration of function 'SetWarningHandler' Magick.xs:2124: warning: implicit declaration of function 'SetErrorHandler' make: *** [Magick.o] Error 1 Error: Status 1 encountered during processing. Before reporting a bug, first run the command again with the -d flag to get complete output. I have no idea what the problem might be or how to go about successfully installing ImageMagick. I'd appreciate any help & advice that someone out there that has done this successfully might be able to provide. Thanks in advance!

  Read the article

• Slow Windows Explorer on Windows 7

  - by MadBoy

  I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

  Read the article

• Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem

  - by zchads

  Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem. Hardware Information: Buffalo Wireless Router/access point, Model: WZR-HP-G300NH-AP DSL Modem: Generic (actually not sure of manufacture). Service Provider: TOT (Thailand) Laptop-1: Windows XP and Belkin PCMIA Network Card Laptop-2: Windows XP unknown network card & Wifi Laptop-3: Windows 7 unknown network card & Wifi Outline of Problem/actions taken: After a recent power failure the router and laptop-1 connected to router were no longer able to access the internet. Actions taken to try and recover internet access: Using Laptop-1 tried to configure Router with PPPoe settings using software from Router Manufacture. During the installation process a Timeout error was experienced, unable to connect to WAN. Used Internet Explorer to communicate directly with Router using IP address. Changed settings to use PPPoe settings given by ISP. Router was not able to communicate with Internet. Repeated steps 1-4 again with no success. Reset Router and DSL modem. Repeated steps 1-4 again still no success. Tried connecting Laptop-1 directly to DSL to gain access to internet to research problem. No Network connection with DSL could be established…connection would be established for a second and then be lost and didn’t appear long enough to actually connect to DSL. Replugged LAN back into Router and connection was regained with laptop-1. Replugged Laptop-1 directly into DSL and again unable to establish network connection. Uninstalled network card and all of its drivers on Laptop-1. Reinstalled network card and drivers and tried connecting directly to DSL. Still unable to make network connection. Plugged DSL into Laptop-3 and Internet connection was established. Being Laptop-3 does not have a CD-Rom, Laptop-2 was tried to connect to the router. With Laptop-2 steps 1-7 ended up being repeated without success. Tried plugging Laptop-2 directly into DSL and again no network connection could be established. Using Laptop-3 with a direct connection to DSL downloaded latest Router FW. Installed router FW using Laptop-1. Tired the installation process again without success. Being desperate reinstalled OS on Laptop-1 still not success. Tried using “ipconfig” with router to see what was going on without success. With laptop-1 connected to DSL went through the “ipconfig /…” inputs to see if anything made a difference. Being the network card was not able to make a connection this provide very little information “media disconnected”. So now I have a router and two laptops which are unable to connect to the internet and sure could use some advice/help.

  Read the article

• Ubuntu Natty: 32-bit userland, 64-bit kernel?

  - by dsimcha

  I'm trying to manually install a 64-bit kernel for 32-bit Ubuntu. I have my reasons for doing so, but they're too complicated to explain here. Prior to Natty, this worked fine. Now, on Natty, I get the following error message when I try doing it the same way: dsimcha@dsimcha-laptop:~$ sudo dpkg -i --force-architecture linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb [sudo] password for dsimcha: dpkg: error processing linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb dsimcha@dsimcha-laptop:~$ cd Downloads/ dsimcha@dsimcha-laptop:~/Downloads$ sudo dpkg -i --force-architecture linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb dpkg: warning: overriding problem because --force enabled: package architecture (amd64) does not match system (i386) (Reading database ... 159153 files and directories currently installed.) Preparing to replace linux-image-2.6.38-8-server:amd64 2.6.38-8.42 (using linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb) ... Done. Unpacking replacement linux-image-2.6.38-8-server:amd64 ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.38-8-server /boot/vmlinuz-2.6.38-8-server run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.38-8-server /boot/vmlinuz-2.6.38-8-server dpkg: dependency problems prevent configuration of linux-image-2.6.38-8-server:amd64: linux-image-2.6.38-8-server:amd64 depends on initramfs-tools (>= 0.36ubuntu6). linux-image-2.6.38-8-server:amd64 depends on coreutils | fileutils (>= 4.0); however: Package coreutils:amd64 is not installed. linux-image-2.6.38-8-server:amd64 depends on module-init-tools (>= 3.3-pre11-4ubuntu3); however: linux-image-2.6.38-8-server:amd64 depends on wireless-crda; however: dpkg: error processing linux-image-2.6.38-8-server:amd64 (--install): dependency problems - leaving unconfigured Errors were encountered while processing: linux-image-2.6.38-8-server:amd64 When I try the dependencies manually, I get, for example: dsimcha@dsimcha-laptop:~/Downloads$ sudo dpkg -i --force-architecture coreutils_8.5-1ubuntu6_amd64.deb dpkg: warning: overriding problem because --force enabled: package architecture (amd64) does not match system (i386) dpkg: error processing coreutils_8.5-1ubuntu6_amd64.deb (--install): coreutils:amd64 8.5-1ubuntu6 (Multi-Arch: no) is not co-installable with coreutils:i386 8.5-1ubuntu6 (Multi-Arch: no) which is currently installed Errors were encountered while processing: coreutils_8.5-1ubuntu6_amd64.deb Has anyone had any success installing 64-bit kernels on 32-bit Natty? If so, how can this be done?

  Read the article

• Custom initrd init script: how to create /dev/initctl

  - by Posco Grubb

  I have a virtual machine (VMM is Xen 3.3) equipped with two IDE HDD's (/dev/hda and /dev/hdb). The root file system is in /dev/hda1, where Scientific Linux 5.4 is installed. /dev/hdb contains an empty ext2 file system. I want to protect the root file system from writes by the VM by using aufs (AnotherUnionFS) to layer a writable file system on top of the root file system. The changes to / will be written to the file system located on /dev/hdb. (Furthermore, outside the VM, the file backing the /dev/hda will also be set to read-only permissions, so the VMM should also prevent the VM from modifying at that level.) (The purpose of this setup: be able to corrupt a virtual machine using software-implemented fault injection but preserve the file system image in order to quickly reboot the VM to a fault-free state.) How do I get an initrd init script to do the necessary mounts to create the union file system? I've tried 2 approaches: I've tried modifying the nash script that mkinitrd creates, but I don't know what setuproot and switchroot do and how to make them use my aufs as the new root. Apparently, nobody else here knows either. (EDIT: I take that back.) I've tried building a LiveCD (using linux-live-6.3.0) and then modifying the Bash /linuxrc script from the generated initrd, and I got the mounts correct, but the final /sbin/init complains about /dev/initctl. Specifically, my /linuxrc mounts the aufs at /union. The last few lines of /linuxrc effectively do the following: cd /union mkdir -p mnt/live pivot_root . mnt/live exec sbin/chroot . sbin/init </dev/console >/dev/console 2>&1 When init starts, it outputs something like init: /dev/initctl: No such file or directory. What is supposed to create this FIFO? I found no such filename in the original linuxrc and liblinuxlive scripts. I tried creating it via "mkfifo /dev/initctl", but then init complained about a timeout opening or writing to the FIFO. Would appreciate any help or pointers. Thanks.

  Read the article

• Benchmark MySQL Cluster using flexAsynch: No free node id found for mysqld(API)?

  - by quanta

  I am going to benchmark MySQL Cluster using flexAsynch follow this guide, details as below: mkdir /usr/local/mysqlc732/ cd /usr/local/src/mysql-cluster-gpl-7.3.2 cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysqlc732/ -DWITH_NDB_TEST=ON make make install Everything works fine until this step: # /usr/local/mysqlc732/bin/flexAsynch -t 1 -p 80 -l 2 -o 100 -c 100 -n FLEXASYNCH - Starting normal mode Perform benchmark of insert, update and delete transactions 1 number of concurrent threads 80 number of parallel operation per thread 100 transaction(s) per round 2 iterations Load Factor is 80% 25 attributes per table 1 is the number of 32 bit words per attribute Tables are with logging Transactions are executed with hint provided No force send is used, adaptive algorithm used Key Errors are disallowed Temporary Resource Errors are allowed Insufficient Space Errors are disallowed Node Recovery Errors are allowed Overload Errors are allowed Timeout Errors are allowed Internal NDB Errors are allowed User logic reported Errors are allowed Application Errors are disallowed Using table name TAB0 NDBT_ProgramExit: 1 - Failed ndb_cluster.log: WARNING -- Failed to allocate nodeid for API at 127.0.0.1. Returned eror: 'No free node id found for mysqld(API).' I also have recompiled with -DWITH_DEBUG=1 -DWITH_NDB_DEBUG=1. How can I run flexAsynch in the debug mode? # /usr/local/mysqlc732/bin/flexAsynch -h FLEXASYNCH Perform benchmark of insert, update and delete transactions Arguments: -t Number of threads to start, default 1 -p Number of parallel transactions per thread, default 32 -o Number of transactions per loop, default 500 -l Number of loops to run, default 1, 0=infinite -load_factor Number Load factor in index in percent (40 -> 99) -a Number of attributes, default 25 -c Number of operations per transaction -s Size of each attribute, default 1 (PK is always of size 1, independent of this value) -simple Use simple read to read from database -dirty Use dirty read to read from database -write Use writeTuple in insert and update -n Use standard table names -no_table_create Don't create tables in db -temp Create table(s) without logging -no_hint Don't give hint on where to execute transaction coordinator -adaptive Use adaptive send algorithm (default) -force Force send when communicating -non_adaptive Send at a 10 millisecond interval -local 1 = each thread its own node, 2 = round robin on node per parallel trans 3 = random node per parallel trans -ndbrecord Use NDB Record -r Number of extra loops -insert Only run inserts on standard table -read Only run reads on standard table -update Only run updates on standard table -delete Only run deletes on standard table -create_table Only run Create Table of standard table -drop_table Only run Drop Table on standard table -warmup_time Warmup Time before measurement starts -execution_time Execution Time where measurement is done -cooldown_time Cooldown time after measurement completed -table Number of standard table, default 0

  Read the article

• Loose component cables causing HDMI video problems

  - by jwir3

  I'm not sure this is the correct forum, but I'll ask anyway. I have an A/V setup at home that has something like the following: Five Components (actually a few more, like a CD player, but they don't really relate to this question): Older Pioneer Receiver Digital Set Top Box Sony BluRay Player Samsung Plasma TV Speakers The reason for the receiver is so that all the sound can go through the speakers, rather than some going to the TV speakers and some to the external speakers. They are connected as follows: Digital Set Top Box connects via component video to Samsung TV directly via Component 2 (audio goes to Older Pioneer Receiver). Sony BluRay player is connected via HDMI 1 to TV, but audio goes to the receiver. Now, the problem I'm having is that when I have the digital set top box connected, there are times when the Netflix or Hulu streams I watch through the Sony BluRay player (it's connected to a router for internet access) will lose video. What I mean by this is that the sound of the episode will keep playing, but the screen will go black. If I jiggle the component cables, it will often come back. If I disconnect the component cables, it will always come back. I've noticed that one of the connections (the red component cable) doesn't like to sit very well in the component socket in the back of the digital set top box. It seems like there is a bad connection here, but it doesn't seem like this should be affecting the HDMI input at all. What I've noticed, though, is that when I disconnect the digital set top box completely (i.e. remove the component cable from the back of the TV), the problem seems to resolve itself. I'm not talking about actually removing the cable physically, because I thought perhaps the cables were mashing against one another, and possibly jiggling each other loose. To correct this possible problem, I took the component cable completely out of the cable ties it was in in the back of my entertainment center, as well as pulled the digital set top box out from the entertainment center altogether. It's now connected directly to the TV, without any other cables touching it to cause some kind of weird interference or just physical pulling on the cable. Same problem. If, however, I disconnect the component cable and just leave it sitting behind the TV, then the problem goes away. So, my question is this - what could be causing this? Is it a case where it's an improperly shielded component cable that's causing interference with the HDMI input, or something that's wrong with the TV? It's an intermittent problem, so it's difficult to track down. The TV isn't that old, so it's probably still under warranty. I'm just wondering if there is something else I can do that might reduce this problem without having to haul a massive television set out of my house to get repaired/replaced.

  Read the article

• How to remove iso 9660 from USB?

  - by a_m0d

  I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

  Read the article

• Ubuntu Newbie Needs Assistance!!

  - by Steve Greene

  New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

  Read the article

• Building Python 3.2.3 on redhat 5: missing _posixsubprocess

  - by Oz123

  I am trying to build Python3 on a RHEL 5.7 machine, I successful managed to build Python 3.2.2, with : # Install required build dependencies yum install openssl-devel bzip2-devel expat-devel gdbm-devel readline-devel sqlite-devel # Fetch and extract source. Please refer to http://www.python.org/download/releases # to ensure the latest source is used. wget http://www.python.org/ftp/python/3.2/Python-3.2.tar.bz2 tar -xjf Python-3.2.tar.bz2 cd Python-3.2 # Configure the build with a prefix (install dir) of /opt/python3, compile, and install. ./configure --prefix=/opt/python3 make But I am failing (?) with Python 3.2.3: Failed to build these modules: _posixsubprocess Is this a problem that should bother me ? How do I build it? I found this patch, but it's not included in sources Python 3.2.3 I obtained from the website ... Applying this patch on my sources, didn't solve the problem ... Here is the output from stderr: ~/tmp/Python-3.2.3 $ make > build.log ldd: warning: you do not have execution permission for `/usr/local/lib/libreadline.so' /usr/bin/ld: skipping incompatible /usr/local/lib/libreadline.so when searching for -lreadline /usr/bin/ld: skipping incompatible /usr/local/lib/libreadline.a when searching for -lreadline /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c: In function '_close_open_fd_range_safe': /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c:205: error: 'O_CLOEXEC' undeclared (first use in this function) /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c:205: error: (Each undeclared identifier is reported only once /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c:205: error: for each function it appears in.) /usr/bin/ld: skipping incompatible /usr/local/lib/libz.so when searching for -lz /usr/bin/ld: skipping incompatible /usr/local/lib/libz.so when searching for -lz ~/tmp/Python-3.2.3 $ grep posix build.log gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -I. -IInclude -I./Include -DPy_BUILD_CORE -c ./Modules/posixmodule.c -o Modules/posixmodule.o ar rc libpython3.2m.a Modules/_threadmodule.o Modules/signalmodule.o Modules/posixmodule.o Modules/errnomodule.o Modules/pwdmodule.o Modules/_sre.o Modules/_codecsmodule.o Modules/_weakref.o Modules/_functoolsmodule.o Modules/operator.o Modules/_collectionsmodule.o Modules/itertoolsmodule.o Modules/_localemodule.o Modules/_iomodule.o Modules/iobase.o Modules/fileio.o Modules/bytesio.o Modules/bufferedio.o Modules/textio.o Modules/stringio.o Modules/zipimport.o Modules/symtablemodule.o Modules/xxsubtype.o building '_posixsubprocess' extension gcc -pthread -fPIC -fno-strict-aliasing -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -IInclude -I/home/oznahum/localroot/include -I. -I./Include -I/usr/local/include -I/home/oznahum/tmp/Python-3.2.3 -c /home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.c -o build/temp.linux-x86_64-3.2/home/oznahum/tmp/Python-3.2.3/Modules/_posixsubprocess.o _posixsubprocess

  Read the article

• Server freezes at XX:25

  - by Karevan

  We've ordered a 50 euro/month server on hetzner.de, it has debian OS. The problem is that server is freezing in random time of the day and nothing appears in log. Only hardware reboot helps. Part of the log file while it was freezing: Aug 17 22:38:26 Debian-60-squeeze-64-minimal pure-ftpd: ([email protected]) [INFO] New connection from 95.211.120.220 Aug 17 22:38:26 Debian-60-squeeze-64-minimal pure-ftpd: ([email protected]) [INFO] Logout. Aug 17 22:39:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22828]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type$ Aug 17 23:09:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22835]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type$ Aug 17 23:17:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22842]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 17 23:39:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22847]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type$ Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: imklog 4.6.4, log source = /proc/kmsg started. Aug 18 09:47:47 Debian-60-squeeze-64-minimal rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1229" x-info="http://www.rsyslog.com"] (re)start Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Initializing cgroup subsys cpuset Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Initializing cgroup subsys cpu Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5$ Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/md2 ro As you can see, it appears only the fact of starting. No. theres no way to look in server's console right after when it freezes, sadly. Datacenter supporters do not really want to help about that. Server has been installed 30th july, times and dates of freezes are down there: 6 august, 0:25 18 august, 2:27 21 august, 1:25 26 august, 23:26. We decided that freezing around ??:25 isn't a hardware fault, and decided to reinstall the OS. Later, 31 august, our admin backed up all files, reinstalled Debian, and restored the backup. But then, 7 september, server went down again, at 5:05. We thought it was related to Anyone else experiencing high rates of Linux server crashes during a leap second day? and turned ntp off. But then the server went down twice again, 21 september, 17:29 and 24 september, 20:27. I called all linux admins I knew to help with solving it and they said everything is fine about configuring OS and it could be hardware only. But they dont know why it always freezes at XX:25-30. Maybe some of you know about something related to that?

  Read the article

• Moving Windows XP from ICH10R RAID 5 to single disk using Linux [migrated]

  - by tudor

  A friend's machine running Windows XP refused to boot recently which is running 3 SATA disks on RAID 5 (which was previously upgraded from RAID 1 not by me). I have determined there to be a disk failure. The disks have been replaced many times in the past few years. I wish to backup the RAID5 partition before I try anything to fix it. The RAID chipset used is ICH10R/DO. So, I plugged in an extra IDE drive and an Ubuntu USB key and looked at the RAID. The partitioning is a mess, but I did find at least one degraded but working RAID array with two partitions, one 79GB and the other 86GB. Then I: 1) Partitioned my IDE disk using fdisk to have a partition of 80GB and bootable, and marked as NTFS. 2) dd the contents of the array to the partition 3) disconnected everything else 4) inserted a Windows XP CD and ran fixboot, fixmbr, and bootcfg. They all run ok and claim that they worked. (e.g. bootcfg detects the Windows partition, fixboot returns saying that it was written correctly.) However, I'm still getting an error like "DISK FAILURE, BOOT DISK NOT FOUND". I have tried running the GRUB rescue disk, which also runs ok, but won't boot into Windows. It just stops with a flashing cursor after chainloader +1, boot. One clue may be that the partitions appear to be wack. One disk has a 79GB RAID partition on a 500GB drive with a offset, the second disk has a 320GB RAID partition across the whole drive. Additionally, the BIOS lists the RAID size as being 149GB. I don't see how this works. How are they even assembling the array when the partitions are so different? I have also tried running the Windows XP automated repair tool, but that didn't work either. I'm presuming this is something simple. Perhaps Windows is attempting to boot into RAID and, upon not finding it, simply crashing? Perhaps the 79GB partitions offset means that it's looking into the disk by that much? Please help!! To clarify: I want to make the single IDE disk bootable with a copy of the array so that I can prove/disprove that it's just that Windows has become corrupted, and use windows tools to correct it before attempting the same thing on the RAID array. That way I have a working backup and can show the process I used to fix it.

  Read the article

• HP F2180 driver installation fails on 64-bit Windows 7

  - by Noam Gal

  Hello; I am trying to install the HP Deskjet AIO (non-network) driver on my machine, which is running the 64-bit version of Windows 7. Before installing it, Windows detected my printer just fine... But I wanted to use the HP scanning application, because tt allows me to scan several photos at once. I ran the DJ_AIO_NonNetwork_ENU_NB file I got from their site, and the installation went almost without a problem... However, at the part where it should have detected the printer, it didn't, so I skipped it - telling the installer I'll connect the printer later. After it was finished I was able to use it regularly, and also scan using the wanted HP application. However, the installer kept popping at random intervals, and giving me an error message. Yesterday I tried removing all the installed HP Applications, and installing from scratch. Running the same installer setup, it now insists that it does not support my operating system, and that 64-bit Vista is the highest it can go... I just don't understand why this is occuring all of the sudden. Has anybody here successfully installed the AIO driver on the 64-bit version of Windows 7? UPDATE: Been chatting with HP chat support over the weekend. Managed to really mess up my windows. At first, they told me to uninstall using an "unintall_l3" batch file inside their installer package, and then reinstall. Didn't work. Also the "l4" batch didn't make any difference. Afterwards I was told to install "Windows install clean up" and remove many hp entries (most of which were not listed on my computer), and I also removed many other hp entries I bumped upon. Then my office 2k7 started failing. I searched around the web, and ran Security Restore, so now my office works, but my windows explorer is all buggy - can't seem to open windows explorer - it hangs while trying to load my hard drives, or completely ignores them and just shows my libraries. Anyone here has any idea how I can restore my win7 to normal, with or without the annoying scanner? UPDATE 2: Ok - explorer back to normal. I guess I just had to wait until it finishes searching while opening the windows explorer for the first time after the Security Restore. Scanner still not working though.

  Read the article

• RHEL5: Can't create sparse file bigger than 256GB in tmpfs

  - by John Kugelman

  /var/log/lastlog gets written to when you log in. The size of this file is based off of the largest UID in the system. The larger the maximum UID, the larger this file is. Thankfully it's a sparse file so the size on disk is much smaller than the size ls reports (ls -s reports the size on disk). On our system we're authenticating against an Active Directory server, and the UIDs users are assigned end up being really, really large. Like, say, UID 900,000,000 for the first AD user, 900,000,001 for the second, etc. That's strange but should be okay. It results in /var/log/lastlog being huuuuuge, though--once an AD user logs in lastlog shows up as 280GB. Its real size is still small, thankfully. This works fine when /var/log/lastlog is stored on the hard drive on an ext3 filesystem. It breaks, however, if lastlog is stored in a tmpfs filesystem. Then it appears that the max file size for any file on the tmpfs is 256GB, so the sessreg program errors out trying to write to lastlog. Where is this 256GB limit coming from, and how can I increase it? As a simple test for creating large sparse files I've been doing: dd if=/dev/zero of=sparse-file bs=1 count=1 seek=300GB I've tried Googling for "tmpfs max file size", "256GB filesystem limit", "linux max file size", things like that. I haven't been able to find much. The only mention of 256GB I can find is that ext3 filesystems with 2KB blocks are limited to 256GB files. But our hard drives are formatted with 4K blocks so that doesn't seem to be it--not to mention this is happening in a tmpfs mounted ON TOP of the hard drive so the ext3 partition shouldn't be a factor. This is all happening on a 64-bit Red Hat Enterprise Linux 5.4 system. Interestingly, on my personal development machine, which is a 32-bit Fedora Core 6 box, I can create 300GB+ files in tmpfs filesystems no problem. On the RHEL5.4 systems it is no go.

  Read the article

• Enterprise Tape Backup solutions

  - by Tom O'Connor

  I'm currently attempting to re-architect a backup solution where I'm working. We've got 2 NAS devices, one in the office, one in the datacentre. The servers in the DC back up to the DC NAS, which is then replicated to the Office NAS. The office NAS exports shares as CIFS and NFS, this bit is fine. At some point, I'll have to expand our storage capacity, currently we've got about 1.4TB of storage space, which is about 96% full. Previously, the tape backup was a script that ran tar a few times and squirted data onto a tape. It worked, but was by no means a perfect solution. Restores are a bit of a pest, adding new data to the backup requires editing the script as root. It's just all a bit non-ideal. I've been evaluating a number of "enterprise" ready backup solutions, such as Yosemite Backup from Barracuda, Acronis Backup/Restore, and something from Arkeia. In the process of evaluating these, I've found 2 big problems. Not all of them allow backup of mounted devices (such as a NFS mounted NAS) Many of these applications don't like our tape device. For the most part, (1) is essential. Our NAS has a feeble processor and can't run applications like backup agents. I suspect that the biggest problem is the tape device, which is a HP C7438A DAT72 connected via USB. Questions: Has anyone else got an USB DAT72 device working with similar software? Is there a better way to back up data from an "appliance" NAS device on which you can't run an agent? Would I be totally out of my mind to specify a cheap HP or Dell server with a couple of 1TB hard disks, and a SAS card to then talk to an HP Ultrium (or similar) device? The biggest drawback to this would be cost (400ish for the server, 200 for the SAS connectivity and 1700 for a LTO4 device) Notes: I'd love to be able to say that I'd get rid of tapes entirely, and use some form of hard disk backup. In a previous job, we had LaCie USB drives, which were decidedly unreliable.

  Read the article

• Is there a way to permanently arrange 2 displays under XP?

  - by rumtscho

  When I am home or on a business trip, or on a meeting, I use my laptop in the usual way. When I get to work, I put it on the docking station and boot it with the lid closed. The image appears on the two displays connected to the docking station. On the left, there is an old monitor connected over VGA, on the right, a big widescreen connected over DVI. Obviously, the videocard seems to think that the DVI is the primary output, and the VGA the secondary one. Thus Windows always displays the widescreen on the left and the old FSC monitor on the right. So when I want to move the mouse pointer from the (physically) left display to the (physically) right display, I have to move it from right to left, which is a usability nightmare. Of course, I can just drag one display over the other one in the display properties, and then everything is as it should be. The catch: Windows remembers this only as long as it has the two displays. Every time it runs on the laptop display, it forgets the setting. Physically switching the monitors isn't an option, for ergonomical reasons. I prefer to run the more important applications on the bigger screen with the better colourspace, and the shape of my desk forces me to sit off-center, so the more important applications should be shown on the right display. Just switching the video ports doesn't help either. When I connect the big monitor over VGA, image quality deteriorates visibly. So what I do now is: every time I bring the laptop to my desk, I boot it. I wait the whole 7 minutes of XP booting, syncing network drives, etc. Then I fire up the display properties, switch to the last tab, drag the widescreen display to the right, and close. Only then can I start working. Does someone have a better idea? The laptop is a Dell Latitude 630 with Windows XP SP 3. It has an nVidia graphics card (not an onboard chip).

  Read the article

• External hard drive FAT32 to NTFS conversion fails

  - by Pieter

  I'm trying to convert the FAT32 file system of an external hard drive to NTFS. Here's what happened: C:\Windows\system32>chkdsk G: The type of the file system is FAT32. Volume PIETEREXT created 3/19/2008 12:43 Volume Serial Number is 1806-2E30 Windows is verifying files and folders... File and folder verification is complete. Windows has scanned the file system and found no problems. No further action is required. 488,264,768 KB total disk space. 72,192 KB in 1,503 hidden files. 1,281,792 KB in 40,029 folders. 309,235,168 KB in 199,915 files. 177,675,584 KB are available. 32,768 bytes in each allocation unit. 15,258,274 total allocation units on disk. 5,552,362 allocation units available on disk. C:\Windows\system32>cd \ C:\>convert g: /fs:ntfs The type of the file system is FAT32. Enter current volume label for drive G: PIETEREXT Volume PIETEREXT created 3/19/2008 12:43 Volume Serial Number is 1806-2E30 Windows is verifying files and folders... File and folder verification is complete. Windows has scanned the file system and found no problems. No further action is required. 488,264,768 KB total disk space. 72,192 KB in 1,503 hidden files. 1,281,792 KB in 40,029 folders. 309,235,168 KB in 199,915 files. 177,675,584 KB are available. 32,768 bytes in each allocation unit. 15,258,274 total allocation units on disk. 5,552,362 allocation units available on disk. Determining disk space required for file system conversion... Total disk space: 488384001 KB Free space on volume: 177675584 KB Space required for conversion: 975155 KB Converting file system The conversion failed. G: was not converted to NTFS I looked at the TechNet page for my error, but after closing every app the conversion was still failing halfway through. Why does it keep failing? I kept an eye on Task Manager but it didn't look like my system resources were near depletion. I'm using Windows 8.

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >