Search Results

Search found 15966 results on 639 pages for 'connection'.

Page 285/639 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• Combine multiple network interfaces to connect to a dedicated server

  - by Dženis Macanovic

  this is an underpaid employee writing, who's apparently responsible for all the IT stuff in a very small (non-IT) company. Today said company got a bunch of PCs/workstations, a switch, a computer that's supposed to be used as a router, two DSL connections (each 16 MBit/s downstream and 1 MBit/s upstream) and a dedicated server which is hosted and managed professionally by a larger local company with some decent connection speed (1 GBit/s both directions if I'm not mistaken). This is what I've set up (note I'm not making use of the second DSL connection at all)... ETH0 ETH1 [ SWITCH ]---[LINUX DEBIAN ROUTER]---[DSL MODEM 1]---[INTERNET] | | | PC1 | | PC2 | ... ... when my boss asked me, if it was somehow possible to get 32 MBit/s downstream and 2 MBit/s upstream. At that time I replied "no" without thinking too much about it. Now I've just had the following idea... ETH1 ETH0 ETH0 ,---[DSL MODEM 1 (NON-STATIC IP)]---, ,---, ETH0 [ SWITCH ]---[LINUX DEBIAN ROUTER] [INTERNET] [LINUX DEBIAN SERVER]---[INTERNET] | | | '---[ DSL MODEM 2 (STATIC IP) ]---' '---' PC1 | | ETH2 ETH0 PC2 | ... ... but I have absolutely no clue how to implement that. Would that even be possible? What would the masquerading rules look like on the router? What about the server? I didn't find anything on the internet, mainly because I couldn't come up with any good keywords to search for to begin with. English obviously isn't my first language. Thanks in advance for your time!

  Read the article

• Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

  - by user93353

  I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

  Read the article

• Exchange 2013 really slow outside of localhost

  - by ItsJustJP

  We've got a 12 core xeon, 24GB of ram 2012 server. We've recently migrated from exchange 2010 (which was on another server) to exchange 2013 which resides on our new 12 core server. Accessing the OWA on the exchange server is fine; it's very quick and responsive however accessing it via any other computer connect to the domain via a 1 gpbs connection and it'll take 10-15 seconds to load. Also running slow is public calenders that people in my place need to access, again taking 10-15 seconds to access and can sometimes cause outlook to not respond. Further to that we have phones that connect via the internet (of course) to the exchange so people can get work emails when they are out of the office. Guess what, this is also running slow. I've have search for many solutions and have tried changing outlook authentication methods but there is no change in speed. The old exchange 2010 server no longer exists but there was no problem before the migration. Has anyone got any suggestions? Thanks :) Must also mention that server 2012 that exchange 2013 is installed on is also the DC. Update: It would appear that any connection via https is slow. It took more than 15 mins for an outlook client to download 50MB of emails (outlook anywhere).

  Read the article

• Passive mode FTP file download hangs from specific machine

  - by chiptuned

  I have a server which is an AWS instance that just cannot download files from a specific FTP server. I can connect to the FTP server fine and run some commands, but when I request a file it just hangs. Here is the debug output of the base linux ftp client after login: ---> SYST 215 UNIX Type: Apache FtpServer Remote system type is UNIX. ftp> get outgoing/catalog.gz catalog.gz local: catalog.gz remote: outgoing/catalog.gz ---> PASV 227 Entering Passive Mode (64,156,167,125,135,191) ---> RETR outgoing/catalog.gz 150 File status okay; about to open data connection. Thats it. Then it just sits there and nothing transfers. I have verified that a data connection is made but the client gets no data. ? ss -nt dst 64.156.167.125 State Recv-Q Send-Q Local Address:Port Peer Address:Port ESTAB 0 0 10.185.147.150:41190 64.156.167.125:21 ESTAB 0 0 10.185.147.150:48871 64.156.167.125:48557 The FTP server is not in my control and downloads from other FTP servers in passive mode have worked. Active mode does not work as the system is behind a firewall. Every FTP client I've tried has the same problem. The download works from other systems, even from other AWS instances I have with the same Security Group. Not necessarily the same distro or config though. I understand it may be some issue on the server side, but I want to know what it is about my particular machine where the transfer hangs and where on every other machine I can get my hands on, it works. Please let me know what the culprit on the client side could be or ideas on what else to look at.

  Read the article

• Connect from Mac OS X to Windows 7 Desktop

  - by jrn

  I am trying to connect from my MacBook to my Windows 7 machine within my own network - if it will work from outside my network that's a plus but no need to have. My Windows 7 machine is freshly installed with Windows 7 Home Premium. It runs the built-in firewall with no settings changed so far as well as Microsoft Security Essentials. So far I tried CoRD and Microsofts Remote Desktop Connections to connect from my Mac to my Windows machine without any success. I did try and disabled the firewall on my Windows machine but could not connect either. The reason I did this was to check wether there is a Windows firewall setting preventing me from connecting. On top of that I manually started the Remote Desktop Services and Remote Desktop Configuration within services.msc. Is there anything else I have to enable for a remote desktop connection? Could there be any router setting I have to tweak? Since I do not want to connect from outside my own network I thought I don't have to do any port forwarding. The error messages I retrieve are all connection timeouts. I can however ping the hostname and/or IP address. Any help would be greatly appreciated. Thanks a lot, jrn

  Read the article

• Can you explain how to understand what the 'iwconfig' command displays in Ubuntu-9.04?

  - by Shawn

  I'm having trouble making my wireless connection work, and I realized I don't really know how to use the tools I have, in this case, the iwconfig command in Ubuntu-9.04. Here is what I get: ***iwconfig*** - lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Network" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 vboxnet0 no wireless extensions. pan0 no wireless extensions. "Network" is the name of my wireless network, btw. But what does this all mean? How can this information help me aquire a working wireless connection? When I try associating a key using sudo iwconfig wlan0 key s:my_key I get the following error message: Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument. I do have the right key though, so what's the problem?

  Read the article

• CentOS and OpenSSH [on hold]

  - by Stephen

  I've recently installed CentOS 6 on an old Dell PC. I'm trying to setup OpenSSH at the moment, I been following some tutorials (http://www.youtube.com/watch?v=QKafb0koJEg) on You Tube, while they have been very helpful I'm at the point where I need to ask some questions. My goal here is to be able to access the server from my work computer and from my personal laptop (which will be on the same home network as the server). I've installed OpenSSH with no issues. So the first thing I was advised to do was port forwarding. So in the sshd_config file, I've changed Port 22 to Port xxxx (where xxxx is a obviously a four digit value). I then restart the sshd service. I've also configured my router for forward port 22 onto xxxx. Is there anything else I need to do? I've generated the keys on my laptop, and I'm trying to copy them to the server as follows: scp id_rsa.pub xxxxxxxx@localhost:.ssh/authorized_keys but this command fails with the following error message: ssh: connect to host localhost port 22: Connection refused lost connection Any help appreciated. Regards...

  Read the article

• How do I tunnel an HTTPS proxy through a virtual machine (VMWare)

  - by Kyle

  I have a personal setup at home using VMWare Workstation. I also have a set of Virtual Private Machines that run Squid, and therefore provide me HTTPS proxy tunnels. Using Proxifier, I can tunnel all traffic for given applications through these tunnels. However, I also have a few virtual machines for dev/staging/experimentation/etc. I generally just use NAT to provide Internet access to the machines, and if I need to use these proxies, I can just setup Proxifier (or a Linux equivalent) to pipe the traffic through them. No problem. But... I got to thinking: Wouldn't it be great if I could assign these proxy tunnels to a virtual machine, so that when I start up the VM, it has instant-on access through the tunnel and not my local connection? (EDIT: Of course, it would USE my local connection, but it would tunnel traffic through the proxy.) To be more clear: I want a solution that binds the proxy to a VM, so that when I start the VM, I don't have to use a proxy client to connect to the tunnel - I am already piping all traffic from that VM through that proxy. I did a bit of searching, and the closest thing I could find was this: How to route public static IP to a virtual machine on a vmware ESXi host? Which wasn't all that applicable. The proxies are protected by user/pass but do not filter by IP. Again, they are HTTPS proxies setup through Squid. Any ideas on how to make this happen? Thanks a ton.

  Read the article

• Cannot browse Visual SVN Repositories

  - by user1783560

  I went through Unable to browse repository after setting visual SVN Server and tried to implement the answer suggested but even the IP address is not solving my problem. I have 1) Turned off firewall 2) Set the directory C:\Program Files (x86)\VisualSVN Server security rights to "full control" for all groups including "Network service" group. 3) Set the directory D:\Repositories security rights to "full control" for most groups including "Network service" group. 4) Tried switching between secure and non-secure connection option in visual svn server manager. 5) Tried different with port numbers. Including 443 (with https) and 80 (http). Also tried giving random ports with/without https. Using computer name/ IP address in the url doesn't help. Windows network diagnostics - Troubleshooting report has following message for me. Security policy settings or firewall settings on this computer might be blocking the connection. = Detected Can someone guide me please? I have spent more than two weeks on this now without any solution. Thanks in advance! I appreciate your responses.

  Read the article

• Windows 7 computer apparently connected to working wireless network but can't access router page or internet

  - by Hemmer

  I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

  Read the article

• Accessing CIFS shares from an OS X machine incredibly slow

  - by Aron Rotteveel

  This is a longshot, because this issue seems over-reported and unanswered on the internet (see references below), but it is about time this issue is permanently solved. The facts: Server: Windows Server 2008, acting as a file server Client: OS X Lion 10.7.3. Method of connecting: directly via IP through Finder: smb://192.168.1.100/share The problem: The initial connection attempt takes about a minute. After the connection is made, it takes one more minute to show the directories in Finder. After navigating to any other directory, it takes several seconds/minutes to parse the directory, seemingly based on the size of the contents. Actually, my entire Finder has this problem after connecting. When using Finder to show my desktop, it can literally take up to a minute to load. Obviously, this is not right. I have no clue how to fix this and would appreciate any help I can get. I am unsure about other relevant information I can provide, but if there is any, please let me know so I can update the post. I seem to be not the only one having this problem: Most importantly, an apple.stackexchange.com entry. Unsolved and unanswered. Several users on the Apple support forums. Users on EduGeek.

  Read the article

• Can you explain how to understand what the 'iwconfig' command displays in Ubuntu-9.04?

  - by Shawn

  I'm having trouble making my wireless connection work, and I realized I don't really know how to use the tools I have, in this case, the iwconfig command in Ubuntu-9.04. Here is what I get: ***iwconfig*** - lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Network" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 vboxnet0 no wireless extensions. pan0 no wireless extensions. "Network" is the name of my wireless network, btw. But what does this all mean? How can this information help me aquire a working wireless connection? When I try associating a key using sudo iwconfig wlan0 key s:my_key I get the following error message: Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument. I do have the right key though, so what's the problem?

  Read the article

• Help - since adding an elastic load balancer to my EC2 web application I cannot connect with the MySQL database (not in AWS)

  - by undefined

  I have a web application that uses an EC2 instance to receive uploaded images, resize and store on S3 and update my MySQL database with the image record. This database is hosted outside Amazon Web Services and so obviously involves communication between the EC2 instance and the database. Images are posted to the upload server from a Flash client which receives the IP address of the upload server when it is loaded and so sends images to 1.12.23.34/resize_script.php This has worked great .. until i started to try and include a load balancer. Since the ELBs do not use an IP address but a DNS address I am now passing this to Flash. Now when I upload images I get the following response from the server - Could not connect to MySQL: Lost connection to MySQL server at 'reading initial communication packet', system error: 111 What might be causing the lost connection to MySQL server. Is there any additional steps I need to take to allow my upload servers to be load balanced? I have set the host property of my MySQL privileges for this user to % any pointers greatly appreciated thanks.

  Read the article

• Iptables state tracking

  - by complexgeek

  Hi there. I've just taken over administration of a fairly complex firewall ruleset for a firewall box running Fedora Core 12, and there's one thing about it that is puzzling me. When I run nmap on the gateway from outside the network, I see all the expected services, but also sunrpc on port 111. The INPUT chain has DEFAULT DROP set, and there is no rule allowing port 111. As best I can tell (watching the packet counters before/during/after the scan) it's being allowed by the rule: "-m state --state RELATED,ESTABLISHED -j ACCEPT" but I don't understand why a brand new TCP connection would be considered RELATED or ESTABLISHED. Any suggestions would be greatly appreciated. EDIT: Conntrack modules: nf_conntrack_netlink 14925 0 nfnetlink 3479 1 nf_conntrack_netlink nf_conntrack_irc 5206 1 nf_nat_irc nf_conntrack_proto_udplite 3138 0 nf_conntrack_h323 62110 1 nf_nat_h323 nf_conntrack_proto_dccp 6878 0 nf_conntrack_sip 16921 1 nf_nat_sip nf_conntrack_proto_sctp 11131 0 nf_conntrack_pptp 10673 1 nf_nat_pptp nf_conntrack_sane 5458 0 nf_conntrack_proto_gre 6574 1 nf_conntrack_pptp nf_conntrack_amanda 2796 1 nf_nat_amanda nf_conntrack_ftp 11741 1 nf_nat_ftp nf_conntrack_tftp 4665 1 nf_nat_tftp nf_conntrack_netbios_ns 1534 0 nf_conntrack_ipv6 18504 2 ipv6 279399 40 ip6t_REJECT,nf_conntrack_ipv6 INPUT chain on the filter table: -A INPUT -s 192.168.200.10/32 -p tcp -m tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -s 127.0.0.0/8 -i lo -j ACCEPT -A INPUT -p udp -m udp --sport 67:68 --dport 67:68 -j ACCEPT -A INPUT -d 192.168.200.5/32 -i eth0 -j ACCEPT -A INPUT -d 192.168.1.2/32 -i eth0 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --dports 22,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --sports 22,25,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --sport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m multiport --sports 53,123 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -i eth0 -m state --state NEW -j ACCEPT -A INPUT -d {public_ip}/32 -m state --state NEW -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT eth0 is connected to the internal network, eth3 is connected to an ADSL modem in bridge mode, ppp0 is the WAN connection tunneled over eth3.

  Read the article

• Unable to install Xdebug

  - by burnt1ce

  I've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. Can anyone provide any suggestions in getting xdebug to show up? This is what i get when i run phpinfo(). **PHP Version 5.3.1** System Windows NT ANDREW_LAPTOP 5.1 build 2600 (Windows XP Professional Service Pack 3) i586 Build Date Nov 20 2009 17:20:57 Compiler MSVC6 (Visual C++ 6.0) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" Server API Apache 2.0 Handler Virtual Directory Support enabled Configuration File (php.ini) Path no value Loaded Configuration File C:\xampp\php\php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) PHP API 20090626 PHP Extension 20090626 Zend Extension 220090626 Zend Extension Build API220090626,TS,VC6 PHP Extension Build API20090626,TS,VC6 Debug Build no Thread Safety enabled Zend Memory Manager enabled Zend Multibyte Support disabled IPv6 Support enabled Registered PHP Streams https, ftps, php, file, glob, data, http, ftp, compress.zlib, compress.bzip2, phar, zip Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls Registered Stream Filters convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, zlib.*, bzip2.* This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies PHP Credits Configuration apache2handler Apache Version Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Apache API Version 20051115 Server Administrator postmaster@localhost Hostname:Port localhost:80 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 5 Virtual Server No Server Root C:/xampp/apache Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_auth_digest mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_dav mod_dav_fs mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_ssl mod_status mod_autoindex_color mod_php5 mod_perl mod_apreq2 Directive Local Value Master Value engine 1 1 last_modified 0 0 xbithack 0 0 Apache Environment Variable Value MIBDIRS C:/xampp/php/extras/mibs MYSQL_HOME C:\xampp\mysql\bin OPENSSL_CONF C:/xampp/apache/bin/openssl.cnf PHP_PEAR_SYSCONF_DIR C:\xampp\php PHPRC C:\xampp\php TMP C:\xampp\tmp HTTP_HOST localhost HTTP_CONNECTION keep-alive HTTP_USER_AGENT Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 HTTP_CACHE_CONTROL max-age=0 HTTP_ACCEPT application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_ACCEPT_ENCODING gzip,deflate,sdch HTTP_ACCEPT_LANGUAGE en-US,en;q=0.8 HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.3 PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin SystemRoot C:\WINDOWS COMSPEC C:\WINDOWS\system32\cmd.exe PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH WINDIR C:\WINDOWS SERVER_SIGNATURE <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> SERVER_SOFTWARE Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 SERVER_NAME localhost SERVER_ADDR 127.0.0.1 SERVER_PORT 80 REMOTE_ADDR 127.0.0.1 DOCUMENT_ROOT C:/xampp/htdocs SERVER_ADMIN postmaster@localhost SCRIPT_FILENAME C:/xampp/htdocs/test.php REMOTE_PORT 3275 GATEWAY_INTERFACE CGI/1.1 SERVER_PROTOCOL HTTP/1.1 REQUEST_METHOD GET QUERY_STRING no value REQUEST_URI /test.php SCRIPT_NAME /test.php HTTP Headers Information HTTP Request Headers HTTP Request GET /test.php HTTP/1.1 Host localhost Connection keep-alive User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 Cache-Control max-age=0 Accept application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding gzip,deflate,sdch Accept-Language en-US,en;q=0.8 Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP Response Headers X-Powered-By PHP/5.3.1 Keep-Alive timeout=5, max=80 Connection Keep-Alive Transfer-Encoding chunked Content-Type text/html bcmath BCMath support enabled Directive Local Value Master Value bcmath.scale 0 0 bz2 BZip2 Support Enabled Stream Wrapper support compress.bz2:// Stream Filter support bzip2.decompress, bzip2.compress BZip2 Version 1.0.5, 10-Dec-2007 calendar Calendar support enabled com_dotnet COM support enabled DCOM support disabled .Net support enabled Directive Local Value Master Value com.allow_dcom 0 0 com.autoregister_casesensitive 1 1 com.autoregister_typelib 0 0 com.autoregister_verbose 0 0 com.code_page no value no value com.typelib_file no value no value Core PHP Version 5.3.1 Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen On On allow_url_include Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output &amp; &amp; asp_tags Off Off auto_append_file no value no value auto_globals_jit On On auto_prepend_file no value no value browscap C:\xampp\php\extras\browscap.ini C:\xampp\php\extras\browscap.ini default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors On On doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 22519 22519 exit_on_timeout Off Off expose_php On On extension_dir C:\xampp\php\ext C:\xampp\php\ext file_uploads On On highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .;C:\xampp\php\PEAR .;C:\xampp\php\PEAR log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc Off Off magic_quotes_runtime Off Off magic_quotes_sybase Off Off mail.add_x_header Off Off mail.force_extra_parameters no value no value mail.log no value no value max_execution_time 60 60 max_file_uploads 20 20 max_input_nesting_level 64 64 max_input_time 60 60 memory_limit 128M 128M open_basedir no value no value output_buffering no value no value output_handler no value no value post_max_size 128M 128M precision 14 14 realpath_cache_size 16K 16K realpath_cache_ttl 120 120 register_argc_argv On On register_globals Off Off register_long_arrays Off Off report_memleaks On On report_zend_debug On On request_order no value no value safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path no value no value serialize_precision 100 100 short_open_tag Off Off SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128M 128M upload_tmp_dir C:\xampp\tmp C:\xampp\tmp user_dir no value no value user_ini.cache_ttl 300 300 user_ini.filename .user.ini .user.ini variables_order GPCS GPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance On On zend.enable_gc On On ctype ctype functions enabled date date/time support enabled "Olson" Timezone Database Version 2009.18 Timezone Database internal Default timezone America/New_York Directive Local Value Master Value date.default_latitude 31.7667 31.7667 date.default_longitude 35.2333 35.2333 date.sunrise_zenith 90.583333 90.583333 date.sunset_zenith 90.583333 90.583333 date.timezone America/New_York America/New_York dom DOM/XML enabled DOM/XML API Version 20031129 libxml Version 2.7.6 HTML Support enabled XPath Support enabled XPointer Support enabled Schema Support enabled RelaxNG Support enabled ereg Regex Library System library enabled exif EXIF Support enabled EXIF Version 1.4 $Id: exif.c 287372 2009-08-16 14:32:32Z iliaa $ Supported EXIF Version 0220 Supported filetypes JPEG,TIFF Directive Local Value Master Value exif.decode_jis_intel JIS JIS exif.decode_jis_motorola JIS JIS exif.decode_unicode_intel UCS-2LE UCS-2LE exif.decode_unicode_motorola UCS-2BE UCS-2BE exif.encode_jis no value no value exif.encode_unicode ISO-8859-15 ISO-8859-15 fileinfo fileinfo support enabled version 1.0.5-dev filter Input Validation and Filtering enabled Revision $Revision: 289434 $ Directive Local Value Master Value filter.default unsafe_raw unsafe_raw filter.default_flags no value no value ftp FTP support enabled gd GD Support enabled GD Version bundled (2.0.34 compatible) FreeType Support enabled FreeType Linkage with freetype FreeType Version 2.3.11 T1Lib Support enabled GIF Read Support enabled GIF Create Support enabled JPEG Support enabled libJPEG Version 7 PNG Support enabled libPNG Version 1.2.40 WBMP Support enabled XBM Support enabled JIS-mapped Japanese Font Support enabled Directive Local Value Master Value gd.jpeg_ignore_warning 0 0 gettext GetText Support enabled hash hash support enabled Hashing Engines md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost adler32 crc32 crc32b salsa10 salsa20 haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 iconv iconv support enabled iconv implementation "libiconv" iconv library version 1.13 Directive Local Value Master Value iconv.input_encoding ISO-8859-1 ISO-8859-1 iconv.internal_encoding ISO-8859-1 ISO-8859-1 iconv.output_encoding ISO-8859-1 ISO-8859-1 imap IMAP c-Client Version 2007e SSL Support enabled json json support enabled json version 1.2.1 libxml libXML support active libXML Compiled Version 2.7.6 libXML Loaded Version 20706 libXML streams enabled mbstring Multibyte Support enabled Multibyte string engine libmbfl HTTP input encoding translation disabled mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1. Multibyte (japanese) regex support enabled Multibyte regex (oniguruma) version 4.7.1 Directive Local Value Master Value mbstring.detect_order no value no value mbstring.encoding_translation Off Off mbstring.func_overload 0 0 mbstring.http_input pass pass mbstring.http_output pass pass mbstring.http_output_conv_mimetypes ^(text/|application/xhtml\+xml) ^(text/|application/xhtml\+xml) mbstring.internal_encoding no value no value mbstring.language neutral neutral mbstring.strict_detection Off Off mbstring.substitute_character no value no value mcrypt mcrypt support enabled Version 2.5.8 Api No 20021217 Supported ciphers cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes Supported modes cbc cfb ctr ecb ncfb nofb ofb stream Directive Local Value Master Value mcrypt.algorithms_dir no value no value mcrypt.modes_dir no value no value mhash MHASH support Enabled MHASH API Version Emulated Support ming Ming SWF output library enabled Version 0.4.3 mysql MySQL Support enabled Active Persistent Links 0 Active Links 0 Client API version 5.1.41 Directive Local Value Master Value mysql.allow_local_infile On On mysql.allow_persistent On On mysql.connect_timeout 60 60 mysql.default_host no value no value mysql.default_password no value no value mysql.default_port 3306 3306 mysql.default_socket MySQL MySQL mysql.default_user no value no value mysql.max_links Unlimited Unlimited mysql.max_persistent Unlimited Unlimited mysql.trace_mode Off Off mysqli MysqlI Support enabled Client API library version 5.1.41 Active Persistent Links 0 Inactive Persistent Links 0 Active Links 0 Client API header version 5.1.41 MYSQLI_SOCKET MySQL Directive Local Value Master Value mysqli.allow_local_infile On On mysqli.allow_persistent On On mysqli.default_host no value no value mysqli.default_port 3306 3306 mysqli.default_pw no value no value mysqli.default_socket MySQL MySQL mysqli.default_user no value no value mysqli.max_links Unlimited Unlimited mysqli.max_persistent Unlimited Unlimited mysqli.reconnect Off Off mysqlnd mysqlnd enabled Version mysqlnd 5.0.5-dev - 081106 - $Revision: 289630 $ Command buffer size 4096 Read buffer size 32768 Read timeout 31536000 Collecting statistics Yes Collecting memory statistics No Client statistics bytes_sent 0 bytes_received 0 packets_sent 0 packets_received 0 protocol_overhead_in 0 protocol_overhead_out 0 bytes_received_ok_packet 0 bytes_received_eof_packet 0 bytes_received_rset_header_packet 0 bytes_received_rset_field_meta_packet 0 bytes_received_rset_row_packet 0 bytes_received_prepare_response_packet 0 bytes_received_change_user_packet 0 packets_sent_command 0 packets_received_ok 0 packets_received_eof 0 packets_received_rset_header 0 packets_received_rset_field_meta 0 packets_received_rset_row 0 packets_received_prepare_response 0 packets_received_change_user 0 result_set_queries 0 non_result_set_queries 0 no_index_used 0 bad_index_used 0 slow_queries 0 buffered_sets 0 unbuffered_sets 0 ps_buffered_sets 0 ps_unbuffered_sets 0 flushed_normal_sets 0 flushed_ps_sets 0 ps_prepared_never_executed 0 ps_prepared_once_executed 0 rows_fetched_from_server_normal 0 rows_fetched_from_server_ps 0 rows_buffered_from_client_normal 0 rows_buffered_from_client_ps 0 rows_fetched_from_client_normal_buffered 0 rows_fetched_from_client_normal_unbuffered 0 rows_fetched_from_client_ps_buffered 0 rows_fetched_from_client_ps_unbuffered 0 rows_fetched_from_client_ps_cursor 0 rows_skipped_normal 0 rows_skipped_ps 0 copy_on_write_saved 0 copy_on_write_performed 0 command_buffer_too_small 0 connect_success 0 connect_failure 0 connection_reused 0 reconnect 0 pconnect_success 0 active_connections 0 active_persistent_connections 0 explicit_close 0 implicit_close 0 disconnect_close 0 in_middle_of_command_close 0 explicit_free_result 0 implicit_free_result 0 explicit_stmt_close 0 implicit_stmt_close 0 mem_emalloc_count 0 mem_emalloc_ammount 0 mem_ecalloc_count 0 mem_ecalloc_ammount 0 mem_erealloc_count 0 mem_erealloc_ammount 0 mem_efree_count 0 mem_malloc_count 0 mem_malloc_ammount 0 mem_calloc_count 0 mem_calloc_ammount 0 mem_realloc_count 0 mem_realloc_ammount 0 mem_free_count 0 proto_text_fetched_null 0 proto_text_fetched_bit 0 proto_text_fetched_tinyint 0 proto_text_fetched_short 0 proto_text_fetched_int24 0 proto_text_fetched_int 0 proto_text_fetched_bigint 0 proto_text_fetched_decimal 0 proto_text_fetched_float 0 proto_text_fetched_double 0 proto_text_fetched_date 0 proto_text_fetched_year 0 proto_text_fetched_time 0 proto_text_fetched_datetime 0 proto_text_fetched_timestamp 0 proto_text_fetched_string 0 proto_text_fetched_blob 0 proto_text_fetched_enum 0 proto_text_fetched_set 0 proto_text_fetched_geometry 0 proto_text_fetched_other 0 proto_binary_fetched_null 0 proto_binary_fetched_bit 0 proto_binary_fetched_tinyint 0 proto_binary_fetched_short 0 proto_binary_fetched_int24 0 proto_binary_fetched_int 0 proto_binary_fetched_bigint 0 proto_binary_fetched_decimal 0 proto_binary_fetched_float 0 proto_binary_fetched_double 0 proto_binary_fetched_date 0 proto_binary_fetched_year 0 proto_binary_fetched_time 0 proto_binary_fetched_datetime 0 proto_binary_fetched_timestamp 0 proto_binary_fetched_string 0 proto_binary_fetched_blob 0 proto_binary_fetched_enum 0 proto_binary_fetched_set 0 proto_binary_fetched_geometry 0 proto_binary_fetched_other 0 init_command_executed_count 0 init_command_failed_count 0 odbc ODBC Support enabled Active Persistent Links 0 Active Links 0 ODBC library Win32 Directive Local Value Master Value odbc.allow_persistent On On odbc.check_persistent On On odbc.default_cursortype Static cursor Static cursor odbc.default_db no value no value odbc.default_pw no value no value odbc.default_user no value no value odbc.defaultbinmode return as is return as is odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes odbc.max_links Unlimited Unlimited odbc.max_persistent Unlimited Unlimited openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8l 5 Nov 2009 OpenSSL Header Version OpenSSL 0.9.8l 5 Nov 2009 pcre PCRE (Perl Compatible Regular Expressions) Support enabled PCRE Library Version 8.00 2009-10-19 Directive Local Value Master Value pcre.backtrack_limit 100000 100000 pcre.recursion_limit 100000 100000 pdf PDF Support enabled PDFlib GmbH Version 7.0.4p4 PECL Version 2.1.6 Revision $Revision: 277110 $ PDO PDO support enabled PDO drivers mysql, odbc, sqlite, sqlite2 pdo_mysql PDO Driver for MySQL enabled Client API version 5.1.41 PDO_ODBC PDO Driver for ODBC (Win32) enabled ODBC Connection Pooling Enabled, strict matching pdo_sqlite PDO Driver for SQLite 3.x enabled SQLite Library 3.6.20 Phar Phar: PHP Archive support enabled Phar EXT version 2.0.1 Phar API version 1.1.1 CVS revision $Revision: 286338 $ Phar-based phar archives enabled Tar-based phar archives enabled ZIP-based phar archives enabled gzip compression enabled bzip2 compression enabled Native OpenSSL support enabled Phar based on pear/PHP_Archive, original concept by Davey Shafik. Phar fully realized by Gregory Beaver and Marcus Boerger. Portions of tar implementation Copyright (c) 2003-2009 Tim Kientzle. Directive Local Value Master Value phar.cache_list no value no value phar.readonly On On phar.require_hash On On Reflection Reflection enabled Version $Revision: 287991 $ session Session Support enabled Registered save handlers files user sqlite Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 On On session.bug_compat_warn On On session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 100 100 session.gc_maxlifetime 1440 1440 session.gc_probability 1 1 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path C:\xampp\tmp C:\xampp\tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies Off Off session.use_trans_sid 0 0 SimpleXML Simplexml support enabled Revision $Revision: 281953 $ Schema support enabled soap Soap Client enabled Soap Server enabled Directive Local Value Master Value soap.wsdl_cache 1 1 soap.wsdl_cache_dir /tmp /tmp soap.wsdl_cache_enabled 1 1 soap.wsdl_cache_limit 5 5 soap.wsdl_cache_ttl 86400 86400 sockets Sockets Support enabled SPL SPL support enabled Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException SQLite SQLite support enabled PECL Module version 2.0-dev $Id: sqlite.c 289598 2009-10-12 22:37:52Z pajoye $ SQLite Library 2.8.17 SQLite Encoding iso8859 Directive Local Value Master Value sqlite.assoc_case 0 0 sqlite3 SQLite3 support enabled SQLite3 module version 0.7-dev SQLite Library 3.6.20 Directive Local Value Master Value sqlite3.extension_dir no value no value standard Dynamic Library Support enabled Internal Sendmail Support for Windows enabled Directive Local Value Master Value assert.active 1 1 assert.bail 0 0 assert.callback no value no value assert.quiet_eval 0 0 assert.warning 1 1 auto_detect_line_endings 0 0 default_socket_timeout 60 60 safe_mode_allowed_env_vars PHP_ PHP_ safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset= user_agent no value no value tokenizer Tokenizer Support enabled wddx WDDX Support enabled WDDX Session Serializer enabled xml XML Support active XML Namespace Support active libxml2 Version 2.7.6 xmlreader XMLReader enabled xmlrpc core library version xmlrpc-epi v. 0.54 php extension version 0.51 author Dan Libby homepage http://xmlrpc-epi.sourceforge.net open sourced by Epinions.com xmlwriter XMLWriter enabled xsl XSL enabled libxslt Version 1.1.26 libxslt compiled against libxml Version 2.7.6 EXSLT enabled libexslt Version 1.1.26 zip Zip enabled Extension Version $Id: php_zip.c 276389 2009-02-24 23:55:14Z iliaa $ Zip version 1.9.1 Libzip version 0.9.0 zlib ZLib Support enabled Stream Wrapper support compress.zlib:// Stream Filter support zlib.inflate, zlib.deflate Compiled Version 1.2.3 Linked Version 1.2.3 Directive Local Value Master Value zlib.output_compression Off Off zlib.output_compression_level -1 -1 zlib.output_handler no value no value Additional Modules Module Name Environment Variable Value no value ::=::\ no value C:=C:\xampp ALLUSERSPROFILE C:\Documents and Settings\All Users APPDATA C:\Documents and Settings\Andrew\Application Data CHROME_RESTART Google Chrome|Whoa! Google Chrome has crashed. Restart now?|LEFT_TO_RIGHT CHROME_VERSION 5.0.342.8 CLASSPATH .;C:\Program Files\QuickTime\QTSystem\QTJava.zip CommonProgramFiles C:\Program Files\Common Files COMPUTERNAME ANDREW_LAPTOP ComSpec C:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK NO HOMEDRIVE C: HOMEPATH \Documents and Settings\Andrew LOGONSERVER \\ANDREW_LAPTOP NUMBER_OF_PROCESSORS 2 OS Windows_NT PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE x86 PROCESSOR_IDENTIFIER x86 Family 6 Model 15 Stepping 10, GenuineIntel PROCESSOR_LEVEL 6 PROCESSOR_REVISION 0f0a ProgramFiles C:\Program Files PROMPT $P$G QTJAVA C:\Program Files\QuickTime\QTSystem\QTJava.zip SESSIONNAME Console sfxcmd "C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe" sfxname C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe SystemDrive C: SystemRoot C:\WINDOWS TEMP C:\DOCUME~1\Andrew\LOCALS~1\Temp TMP C:\DOCUME~1\Andrew\LOCALS~1\Temp USERDOMAIN ANDREW_LAPTOP USERNAME Andrew USERPROFILE C:\Documents and Settings\Andrew VS100COMNTOOLS C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\ windir C:\WINDOWS AP_PARENT_PID 2216 PHP Variables Variable Value _SERVER["MIBDIRS"] C:/xampp/php/extras/mibs _SERVER["MYSQL_HOME"] C:\xampp\mysql\bin _SERVER["OPENSSL_CONF"] C:/xampp/apache/bin/openssl.cnf _SERVER["PHP_PEAR_SYSCONF_DIR"] C:\xampp\php _SERVER["PHPRC"] C:\xampp\php _SERVER["TMP"] C:\xampp\tmp _SERVER["HTTP_HOST"] localhost _SERVER["HTTP_CONNECTION"] keep-alive _SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 _SERVER["HTTP_CACHE_CONTROL"] max-age=0 _SERVER["HTTP_ACCEPT"] application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 _SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate,sdch _SERVER["HTTP_ACCEPT_LANGUAGE"] en-US,en;q=0.8 _SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.3 _SERVER["PATH"] C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin _SERVER["SystemRoot"] C:\WINDOWS _SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe _SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH _SERVER["WINDIR"] C:\WINDOWS _SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> _SERVER["SERVER_SOFTWARE"] Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 _SERVER["SERVER_NAME"] localhost _SERVER["SERVER_ADDR"] 127.0.0.1 _SERVER["SERVER_PORT"] 80 _SERVER["REMOTE_ADDR"] 127.0.0.1 _SERVER["DOCUMENT_ROOT"] C:/xampp/htdocs _SERVER["SERVER_ADMIN"] postmaster@localhost _SERVER["SCRIPT_FILENAME"] C:/xampp/htdocs/test.php _SERVER["REMOTE_PORT"] 3275 _SERVER["GATEWAY_INTERFACE"] CGI/1.1 _SERVER["SERVER_PROTOCOL"] HTTP/1.1 _SERVER["REQUEST_METHOD"] GET _SERVER["QUERY_STRING"] no value _SERVER["REQUEST_URI"] /test.php _SERVER["SCRIPT_NAME"] /test.php _SERVER["PHP_SELF"] /test.php _SERVER["REQUEST_TIME"] 1270600868 _SERVER["argv"] Array ( ) _SERVER["argc"] 0 PHP License This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

  Read the article

• Java Port Socket Programming Error

  - by atrus-darkstone

  Hi- I have been working on a java client-server program using port sockets. The goal of this program is for the client to take a screenshot of the machine it is running on, break the RGB info of this image down into integers and arrays, then send this info over to the server, where it is reconstructed into a new image file. However, when I run the program I am experiencing the following two bugs: The first number recieved by the server, no matter what its value is according to the client, is always 49. The client only sends(or the server only receives?) the first value, then the program hangs forever. Any ideas as to why this is happening, and what I can do to fix it? The code for both client and server is below. Thanks! CLIENT: import java.awt.*; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.image.BufferedImage; import java.io.*; import java.net.Socket; import java.text.SimpleDateFormat; import java.util.*; import javax.swing.*; import javax.swing.Timer; public class ViewerClient implements ActionListener{ private Socket vSocket; private BufferedReader in; private PrintWriter out; private Robot robot; // static BufferedReader orders = null; public ViewerClient() throws Exception{ vSocket = null; in = null; out = null; robot = null; } public void setVSocket(Socket vs) { vSocket = vs; } public void setInput(BufferedReader i) { in = i; } public void setOutput(PrintWriter o) { out = o; } public void setRobot(Robot r) { robot = r; } /*************************************************/ public Socket getVSocket() { return vSocket; } public BufferedReader getInput() { return in; } public PrintWriter getOutput() { return out; } public Robot getRobot() { return robot; } public void run() throws Exception{ int speed = 2500; int pause = 5000; Timer timer = new Timer(speed, this); timer.setInitialDelay(pause); // System.out.println("CLIENT: Set up timer."); try { setVSocket(new Socket("Alex-PC", 4444)); setInput(new BufferedReader(new InputStreamReader(getVSocket().getInputStream()))); setOutput(new PrintWriter(getVSocket().getOutputStream(), true)); setRobot(new Robot()); // System.out.println("CLIENT: Established connection and IO ports."); // timer.start(); captureScreen(nameImage()); }catch(Exception e) { System.err.println(e); } } public void captureScreen(String fileName) throws Exception{ Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize(); Rectangle screenRectangle = new Rectangle(screenSize); BufferedImage image = getRobot().createScreenCapture(screenRectangle); int width = image.getWidth(); int height = image.getHeight(); int[] pixelData = new int[(width * height)]; image.getRGB(0,0, width, height, pixelData, width, height); byte[] imageData = new byte[(width * height)]; String fromServer = null; if((fromServer = getInput().readLine()).equals("READY")) { sendWidth(width); sendHeight(height); sendArrayLength((width * height)); sendImageInfo(fileName); sendImageData(imageData); } /* System.out.println(imageData.length); String fromServer = null; for(int i = 0; i < pixelData.length; i++) { imageData[i] = ((byte)pixelData[i]); } System.out.println("CLIENT: Pixel data successfully converted to byte data."); System.out.println("CLIENT: Waiting for ready message..."); if((fromServer = getInput().readLine()).equals("READY")) { System.out.println("CLIENT: Ready message recieved."); getOutput().println("SENDING ARRAY LENGTH..."); System.out.println("CLIENT: Sending array length..."); System.out.println("CLIENT: " + imageData.length); getOutput().println(imageData.length); System.out.println("CLIENT: Array length sent."); getOutput().println("SENDING IMAGE..."); System.out.println("CLIENT: Sending image data..."); for(int i = 0; i < imageData.length; i++) { getOutput().println(imageData[i]); } System.out.println("CLIENT: Image data sent."); getOutput().println("SENDING IMAGE WIDTH..."); System.out.println("CLIENT: Sending image width..."); getOutput().println(width); System.out.println("CLIENT: Image width sent."); getOutput().println("SENDING IMAGE HEIGHT..."); System.out.println("CLIENT: Sending image height..."); getOutput().println(height); System.out.println("CLIENT: Image height sent..."); getOutput().println("SENDING IMAGE INFO..."); System.out.println("CLIENT: Sending image info..."); getOutput().println(fileName); System.out.println("CLIENT: Image info sent."); getOutput().println("FINISHED."); System.out.println("Image data sent successfully."); } if((fromServer = getInput().readLine()).equals("CLOSE DOWN")) { getOutput().close(); getInput().close(); getVSocket().close(); } */ } public String nameImage() throws Exception { String dateFormat = "yyyy-MM-dd HH-mm-ss"; Calendar cal = Calendar.getInstance(); SimpleDateFormat sdf = new SimpleDateFormat(dateFormat); String fileName = sdf.format(cal.getTime()); return fileName; } public void sendArrayLength(int length) throws Exception { getOutput().println("SENDING ARRAY LENGTH..."); getOutput().println(length); } public void sendWidth(int width) throws Exception { getOutput().println("SENDING IMAGE WIDTH..."); getOutput().println(width); } public void sendHeight(int height) throws Exception { getOutput().println("SENDING IMAGE HEIGHT..."); getOutput().println(height); } public void sendImageData(byte[] imageData) throws Exception { getOutput().println("SENDING IMAGE..."); for(int i = 0; i < imageData.length; i++) { getOutput().println(imageData[i]); } } public void sendImageInfo(String info) throws Exception { getOutput().println("SENDING IMAGE INFO..."); getOutput().println(info); } public void actionPerformed(ActionEvent a){ String message = null; try { if((message = getInput().readLine()).equals("PROCESSING...")) { if((message = getInput().readLine()).equals("IMAGE RECIEVED SUCCESSFULLY.")) { captureScreen(nameImage()); } } }catch(Exception e) { JOptionPane.showMessageDialog(null, "Problem: " + e); } } } SERVER: import java.awt.image.BufferedImage; import java.io.*; import java.net.*; import javax.imageio.ImageIO; /*IMPORTANT TODO: * 1. CLOSE ALL STREAMS AND SOCKETS WITHIN CLIENT AND SERVER! * 2. PLACE MAIN EXEC CODE IN A TIMED WHILE LOOP TO SEND FILE EVERY X SECONDS * */ public class ViewerServer { private ServerSocket vServer; private Socket vClient; private PrintWriter out; private BufferedReader in; private byte[] imageData; private int width; private int height; private String imageInfo; private int[] rgbData; private boolean active; public ViewerServer() throws Exception{ vServer = null; vClient = null; out = null; in = null; imageData = null; width = 0; height = 0; imageInfo = null; rgbData = null; active = true; } public void setVServer(ServerSocket vs) { vServer = vs; } public void setVClient(Socket vc) { vClient = vc; } public void setOutput(PrintWriter o) { out = o; } public void setInput(BufferedReader i) { in = i; } public void setImageData(byte[] imDat) { imageData = imDat; } public void setWidth(int w) { width = w; } public void setHeight(int h) { height = h; } public void setImageInfo(String im) { imageInfo = im; } public void setRGBData(int[] rd) { rgbData = rd; } public void setActive(boolean a) { active = a; } /***********************************************/ public ServerSocket getVServer() { return vServer; } public Socket getVClient() { return vClient; } public PrintWriter getOutput() { return out; } public BufferedReader getInput() { return in; } public byte[] getImageData() { return imageData; } public int getWidth() { return width; } public int getHeight() { return height; } public String getImageInfo() { return imageInfo; } public int[] getRGBData() { return rgbData; } public boolean getActive() { return active; } public void run() throws Exception{ connect(); setActive(true); while(getActive()) { recieve(); } close(); } public void recieve() throws Exception{ String clientStatus = null; int clientData = 0; // System.out.println("SERVER: Sending ready message..."); getOutput().println("READY"); // System.out.println("SERVER: Ready message sent."); if((clientStatus = getInput().readLine()).equals("SENDING IMAGE WIDTH...")) { setWidth(getInput().read()); System.out.println("Width: " + getWidth()); } if((clientStatus = getInput().readLine()).equals("SENDING IMAGE HEIGHT...")) { setHeight(getInput().read()); System.out.println("Height: " + getHeight()); } if((clientStatus = getInput().readLine()).equals("SENDING ARRAY LENGTH...")) { clientData = getInput().read(); setImageData(new byte[clientData]); System.out.println("Array length: " + clientData); } if((clientStatus = getInput().readLine()).equals("SENDING IMAGE INFO...")) { setImageInfo(getInput().readLine()); System.out.println("Image Info: " + getImageInfo()); } if((clientStatus = getInput().readLine()).equals("SENDING IMAGE...")) { for(int i = 0; i < getImageData().length; i++) { getImageData()[i] = ((byte)getInput().read()); } } if((clientStatus = getInput().readLine()).equals("FINISHED.")) { getOutput().println("PROCESSING..."); setRGBData(new int[getImageData().length]); for(int i = 0; i < getRGBData().length; i++) { getRGBData()[i] = getImageData()[i]; } BufferedImage image = null; image.setRGB(0, 0, getWidth(), getHeight(), getRGBData(), getWidth(), getHeight()); ImageIO.write(image, "png", new File(imageInfo + ".png")); //create an image file out of the screenshot getOutput().println("IMAGE RECIEVED SUCCESSFULLY."); } } public void connect() throws Exception { setVServer(new ServerSocket(4444)); //establish server connection // System.out.println("SERVER: Connection established."); setVClient(getVServer().accept()); //accept client connection request // System.out.println("SERVER: Accepted connection request."); setOutput(new PrintWriter(vClient.getOutputStream(), true)); //set up an output channel setInput(new BufferedReader(new InputStreamReader(vClient.getInputStream()))); //set up an input channel // System.out.println("SERVER: Created IO ports."); } public void close() throws Exception { getOutput().close(); getInput().close(); getVClient().close(); getVServer().close(); } }

  Read the article

• How and where to implement basic authentication in Kibana 3

  - by Jabb

  I have put my elasticsearch server behind a Apache reverse proxy that provides basic authentication. Authenticating to Apache directly from the browser works fine. However, when I use Kibana 3 to access the server, I receive authentication errors. Obviously because no auth headers are sent along with Kibana's Ajax calls. I added the below to elastic-angular-client.js in the Kibana vendor directory to implement authentication quick and dirty. But for some reason it does not work. $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); What is the best approach and place to implement basic authentication in Kibana? /*! elastic.js - v1.1.1 - 2013-05-24 * https://github.com/fullscale/elastic.js * Copyright (c) 2013 FullScale Labs, LLC; Licensed MIT */ /*jshint browser:true */ /*global angular:true */ 'use strict'; /* Angular.js service wrapping the elastic.js API. This module can simply be injected into your angular controllers. */ angular.module('elasticjs.service', []) .factory('ejsResource', ['$http', function ($http) { return function (config) { var // use existing ejs object if it exists ejs = window.ejs || {}, /* results are returned as a promise */ promiseThen = function (httpPromise, successcb, errorcb) { return httpPromise.then(function (response) { (successcb || angular.noop)(response.data); return response.data; }, function (response) { (errorcb || angular.noop)(response.data); return response.data; }); }; // check if we have a config object // if not, we have the server url so // we convert it to a config object if (config !== Object(config)) { config = {server: config}; } // set url to empty string if it was not specified if (config.server == null) { config.server = ''; } /* implement the elastic.js client interface for angular */ ejs.client = { server: function (s) { if (s == null) { return config.server; } config.server = s; return this; }, post: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); console.log($http.defaults.headers); path = config.server + path; var reqConfig = {url: path, data: data, method: 'POST'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, get: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; // no body on get request, data will be request params var reqConfig = {url: path, params: data, method: 'GET'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, put: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; var reqConfig = {url: path, data: data, method: 'PUT'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, del: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; var reqConfig = {url: path, data: data, method: 'DELETE'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, head: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; // no body on HEAD request, data will be request params var reqConfig = {url: path, params: data, method: 'HEAD'}; return $http(angular.extend(reqConfig, config)) .then(function (response) { (successcb || angular.noop)(response.headers()); return response.headers(); }, function (response) { (errorcb || angular.noop)(undefined); return undefined; }); } }; return ejs; }; }]); UPDATE 1: I implemented Matts suggestion. However, the server returns a weird response. It seems that the authorization header is not working. Could it have to do with the fact, that I am running Kibana on port 81 and elasticsearch on 8181? OPTIONS /solar_vendor/_search HTTP/1.1 Host: 46.252.46.173:8181 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:25.0) Gecko/20100101 Firefox/25.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Origin: http://46.252.46.173:81 Access-Control-Request-Method: POST Access-Control-Request-Headers: authorization,content-type Connection: keep-alive Pragma: no-cache Cache-Control: no-cache This is the response HTTP/1.1 401 Authorization Required Date: Fri, 08 Nov 2013 23:47:02 GMT WWW-Authenticate: Basic realm="Username/Password" Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 346 Connection: close Content-Type: text/html; charset=iso-8859-1 UPDATE 2: Updated all instances with the modified headers in these Kibana files root@localhost:/var/www/kibana# grep -r 'ejsResource(' . ./src/app/controllers/dash.js: $scope.ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); ./src/app/services/querySrv.js: var ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); ./src/app/services/filterSrv.js: var ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); ./src/app/services/dashboard.js: var ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); And modified my vhost conf for the reverse proxy like this <VirtualHost *:8181> ProxyRequests Off ProxyPass / http://127.0.0.1:9200/ ProxyPassReverse / https://127.0.0.1:9200/ <Location /> Order deny,allow Allow from all AuthType Basic AuthName “Username/Password” AuthUserFile /var/www/cake2.2.4/.htpasswd Require valid-user Header always set Access-Control-Allow-Methods "GET, POST, DELETE, OPTIONS, PUT" Header always set Access-Control-Allow-Headers "Content-Type, X-Requested-With, X-HTTP-Method-Override, Origin, Accept, Authorization" Header always set Access-Control-Allow-Credentials "true" Header always set Cache-Control "max-age=0" Header always set Access-Control-Allow-Origin * </Location> ErrorLog ${APACHE_LOG_DIR}/error.log </VirtualHost> Apache sends back the new response headers but the request header still seems to be wrong somewhere. Authentication just doesn't work. Request Headers OPTIONS /solar_vendor/_search HTTP/1.1 Host: 46.252.26.173:8181 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:25.0) Gecko/20100101 Firefox/25.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Origin: http://46.252.26.173:81 Access-Control-Request-Method: POST Access-Control-Request-Headers: authorization,content-type Connection: keep-alive Pragma: no-cache Cache-Control: no-cache Response Headers HTTP/1.1 401 Authorization Required Date: Sat, 09 Nov 2013 08:48:48 GMT Access-Control-Allow-Methods: GET, POST, DELETE, OPTIONS, PUT Access-Control-Allow-Headers: Content-Type, X-Requested-With, X-HTTP-Method-Override, Origin, Accept, Authorization Access-Control-Allow-Credentials: true Cache-Control: max-age=0 Access-Control-Allow-Origin: * WWW-Authenticate: Basic realm="Username/Password" Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 346 Connection: close Content-Type: text/html; charset=iso-8859-1 SOLUTION: After doing some more research, I found out that this is definitely a configuration issue with regard to CORS. There are quite a few posts available regarding that topic but it appears that in order to solve my problem, it would be necessary to to make some very granular configurations on apache and also make sure that the right stuff is sent from the browser. So I reconsidered the strategy and found a much simpler solution. Just modify the vhost reverse proxy config to move the elastisearch server AND kibana on the same http port. This also adds even better security to Kibana. This is what I did: <VirtualHost *:8181> ProxyRequests Off ProxyPass /bigdatadesk/ http://127.0.0.1:81/bigdatadesk/src/ ProxyPassReverse /bigdatadesk/ http://127.0.0.1:81/bigdatadesk/src/ ProxyPass / http://127.0.0.1:9200/ ProxyPassReverse / https://127.0.0.1:9200/ <Location /> Order deny,allow Allow from all AuthType Basic AuthName “Username/Password” AuthUserFile /var/www/.htpasswd Require valid-user </Location> ErrorLog ${APACHE_LOG_DIR}/error.log </VirtualHost>

  Read the article

• datalist edit mode.

  - by Ranjana

  i have a datalist control <ItemTemplate> <tr> <td height="31px"> <asp:Label ID="lblStudentName" runat="server" Text="StudentName :" Font-Bold="true"></asp:Label> <%# DataBinder.Eval(Container.DataItem, "StudentName") %> </td> <td height="31px"> <asp:LinkButton ID="lnkEdit" runat="server" CommandName="edit">Edit</asp:LinkButton> </td> </tr> <tr> <td> <asp:Label ID="lblAdmissionNo" runat="server" Text="AdmissionNo :" Font-Bold="true"></asp:Label> <%# DataBinder.Eval(Container.DataItem, "AdmissionNo")%> </td> </tr> <tr> <td height="31px"> <asp:Label ID="lblStudentRollNo" runat="server" Text="StdentRollNo :" Font-Bold="true"></asp:Label> <%# DataBinder.Eval(Container.DataItem, "StdentRollNo") %> </td> <td height="31px"> <asp:LinkButton ID="lnkEditroll" runat="server" CommandName="edit">Edit</asp:LinkButton> </td> </tr> </ItemTemplate> <EditItemTemplate> <tr> <td height="31px"> <asp:Label ID="lblStudentName" runat="server" Text="StudentName :" Font-Bold="true"></asp:Label> <asp:TextBox ID="txtProductName" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "StudentName") %>'></asp:TextBox> </td> <td> <asp:LinkButton ID="lnkUpdate" runat="server" CommandName="update">Update</asp:LinkButton> <asp:LinkButton ID="lnkCancel" runat="server" CommandName="cancel">Cancel</asp:LinkButton> </td> </tr> <tr> <td height="31px"> <asp:Label ID="lblAdmissionNo" runat="server" Text="AdmissionNo :" Font-Bold="true"></asp:Label> <%# DataBinder.Eval(Container.DataItem, "AdmissionNo")%> </td> </tr> <tr> <td height="31px"> <asp:Label ID="lblStudentRollNo" runat="server" Text="StudentRollNo :" Font-Bold="true"></asp:Label> <asp:TextBox ID="txtStudentRollNo" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "StdentRollNo") %>'></asp:TextBox> </td> <td> <asp:LinkButton ID="LinkButton1" runat="server" CommandName="update">Update</asp:LinkButton> <asp:LinkButton ID="LinkButton2" runat="server" CommandName="cancel">Cancel</asp:LinkButton> </td> </tr> </EditItemTemplate> <FooterTemplate> </table> </FooterTemplate> </asp:DataList> code behind: protected void Page_Load(object sender, EventArgs e) { if (!Page.IsPostBack) { DataTable dt = new DataTable(); dt = obj.GetSamples(); DataList1.DataSource = dt; DataList1.DataBind(); } } public void DataBind() { DataTable dt = new DataTable(); dt = obj.GetSamples(); DataList1.DataSource = dt; DataList1.DataBind(); } protected void DataList1_EditCommand1(object source, DataListCommandEventArgs e) { DataList1.EditItemIndex = e.Item.ItemIndex; DataBind(); } protected void DataList1_CancelCommand1(object source, DataListCommandEventArgs e) { DataList1.EditItemIndex = -1; DataBind(); } protected void DataList1_UpdateCommand1(object source, DataListCommandEventArgs e) { // Get the DataKey value associated with current Item Index. // int AdmissionNo = Convert.ToInt32(DataList1.DataKeys[e.Item.ItemIndex]); string AdmissionNo = DataList1.DataKeys[e.Item.ItemIndex].ToString(); // Get updated value entered by user in textbox control for // ProductName field. TextBox txtProductName; txtProductName = (TextBox)e.Item.FindControl("txtProductName"); TextBox txtStudentRollNo; txtStudentRollNo = (TextBox)e.Item.FindControl("txtStudentRollNo"); // string variable to store the connection string // retrieved from the connectionStrings section of web.config string connectionString = ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString; // sql connection object SqlConnection mySqlConnection = new SqlConnection(connectionString); // sql command object initialized with update command text SqlCommand mySqlCommand = new SqlCommand("update SchoolAdmissionForm set StudentName=@studentname ,StdentRollNo=@studentroll where AdmissionNo=@admissionno", mySqlConnection); mySqlCommand.Parameters.Add("@studentname", SqlDbType.VarChar).Value = txtProductName.Text; mySqlCommand.Parameters.Add("@admissionno", SqlDbType.VarChar).Value = AdmissionNo; mySqlCommand.Parameters.Add("@studentroll", SqlDbType.VarChar).Value = txtStudentRollNo.Text; // check the connection state and open it accordingly. if (mySqlConnection.State == ConnectionState.Closed) mySqlConnection.Open(); // execute sql update query mySqlCommand.ExecuteNonQuery(); // check the connection state and close it accordingly. if (mySqlConnection.State == ConnectionState.Open) mySqlConnection.Close(); // reset the DataList mode back to its initial state DataList1.EditItemIndex = -1; DataBind(); // BindDataList(); } But it works fine.... but when i click edit command both the Fields 1.StudentName 2.StudentRollNo im getting textboxes to all the fields where i placed textbox when i click 'edit' command and not the particular field alone . but i should get oly the textbox visible to the field to which i clik as 'edit' , and the rest remain same without showing textboxes even though it is in editmode

  Read the article

• Session is working in Localhost Properly but not Online (Cpanel)

  - by nando pandi

  Hello guys Sorry for my stupid question regarding to my yesterday question its not solved yet even the advice you have given but still not working. i have removed all of spaces but still showing the problem for me. it's working perfect in localhost but not in CPANEL. Here is the errors which give: Warning: session_start() [function.session-start]: Cannot send session cookie - headers already sent by (output started at /home/scalepro/public_html/Admin Panel/Remote Employee/main.php:1) in /home/scalepro/public_html/Admin Panel/Remote Employee/main.php on line 1 Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /home/scalepro/public_html/Admin Panel/Remote Employee/main.php:1) in /home/scalepro/public_html/Admin Panel/Remote Employee/main.php on line 1 Warning: Cannot modify header information - headers already sent by (output started at /home/scalepro/public_html/Admin Panel/Remote Employee/main.php:1) in /home/scalepro/public_html/Admin Panel/Remote Employee/main.php on line 13 Warning: Unknown: Your script possibly relies on a session side-effect which existed until PHP 4.2.3. Please be advised that the session extension does not consider global variables as a source of data, unless register_globals is enabled. You can disable this functionality and this warning by setting session.bug_compat_42 or session.bug_compat_warn to off, respectively in Unknown on line 0 ANY ONE PLEASE ??? Here is my code: <?php session_start(); require_once('../../Admin Panel/db.php'); if(isset($_POST['email']) && !empty($_POST['email']) && isset($_POST['password']) && !empty($_POST['password'])) { $email = $_POST['email']; $password = $_POST['password']; $query="SELECT RemoteEmployeeFullName, RemoteEmployeeEmail, RemoteEmployeePassword FROM remoteemployees WHERE RemoteEmployeeEmail='".$email."' AND RemoteEmployeePassword='".$password."'"; $queryrun=$connection->query($query); if($queryrun->num_rows > 0) { $_SESSION['email']=$RemoteEmployeeFullName; header("Location: /home/scalepro/public_html/Admin Panel/Remote Employee/REPLists.php"); } else { echo 'Email: <b>'.$email. '</b> or Password <b>'. $password.'</b> Is Not Typed Correctly Try Again Please!.'; header( "refresh:5;url= /home/scalepro/public_html/spd/myaccount.php" ); } } else { header( "refresh:5;url= /home/scalepro/public_html/spd/myaccount.php" ); } ?> if the condition gets true this will be redirected to a page by the name of REPLists.php here is the page. <?php session_start(); require_once('../../Admin Panel/db.php'); ?> <html> <head> <style> .wrapper { width:1250px; height:auto; border:solid 1px #000; margin:0 auto; padding:5px; border-radius:5px; -webkit-border-radius:5px; -moz-border-radius:5px; -ms-border-radius:5px; } .wrapper .header { width:1250px; height:20px; border-bottom:solid 1px #f0eeee; margin:auto 0; margin-bottom:12px; } .wrapper .header div { text-decoration:none; color:#F60; } .wrapper .header div a { text-decoration:none; color:#F60; } .wrapper .Labelcon { width:1250px; height:29px; border-bottom:solid 1px #ccc; } .wrapper .Labelcon .Label { width:125px; height:20px; float:left; text-align:center; border-left:1px solid #f0eeee; font:Verdana, Geneva, sans-serif; font-size:14.3px; font-weight:bold; } .wrapper .Valuecon { width:1250px; height:29px; border-bottom:solid 1px #ccc; color:#F60; text-decoration:none; } .wrapper .Valuecon .Value { width:125px; height:20px; float:left; text-align:center; border-left:1px solid #f0eeee; font-size:14px; } </style> </head> <body> <div class="wrapper"> <div class="header"> <div style="float:left;"><font color="#000000">Email: </font> <?php if(isset($_SESSION['email'])) { echo $_SESSION['email']; } ?> </div> <div style="float:right;"> <a href="#">My Profile</a> | <a href="logout.php">Logout</a></div> </div> <div class="Labelcon"> <div class="Label">Property ID</div> <div class="Label">Property Type</div> <div class="Label">Property Deal Type</div> <div class="Label">Property Owner</div> <div class="Label">Proposted Price</div> </div> <?php if(!isset($_SESSION['email'])) { header('Location:../../spd/myaccount.php'); } else { $query = "SELECT properties.PropertyID, properties.PropertyType, properties.PropertyDealType, properties.Status, properties.PropostedPrice, remoteemployees.RemoteEmployeeFullName, propertyowners.PropertyOwnerName, propertydealers.PropertyDealerName FROM remoteemployees, propertyowners, propertydealers, properties WHERE properties.PropertyOwnerID=propertyowners.PropertyOwnerID AND properties.PropertyDealerID=propertydealers.PropertyDealerID AND remoteemployees.RemoteEmployeeID=properties.RemoteEmployeeID ORDER BY properties.PropertyID "; $query_run = $connection->query($query); if( $connection->error ) exit( $connection->error ); while($row=$query_run->fetch_assoc()) { ?> <div class="Valuecon"> <div class="Value"><?php echo $row['PropertyID'] ?></div> <div class="Value"><?php echo $row['PropertyType'] ?></div> <div class="Value"><?php echo $row['PropertyDealType']?></div> <div class="Value"><?php echo $row['PropertyOwnerName'] ?></div> <div class="Value"><?php echo $row['PropostedPrice'];?></div> </div> <?php } }?> </div> </body> </html>

  Read the article

• Sonicwall VPN, Domain Controller Issues

  - by durilai

  I am trying to get the domain logon script to execute when I connect to VPN. I have a SonicWall 4060PRO, with the SonicOS Enhanced 4.2.0.0-10e. The VPN connects successfully, but the script does not execute. I am posting the log below, but I see two issues. The first is the inability to connect to domain. 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX NetGetDCName failed: Could not find domain controller for this domain. The second is the failure of the script. 2009/12/18 19:49:53:466 Warning XXX.XXX.XXX.XXX Failed to execute script file \DT-WIN7netlogondomain.bat, Last Error: The network name cannot be found.. I assume the second issue is caused because of the first, also on the second issue it seems to be trying to get the logon script from my local PC, not the server. Finally, the DC can be pinged and reached by its computer name once the VPN is connected. The shares that the script is tring to map can be mapped manually. Any help is appreciated. 2009/12/18 19:49:31:063 Information The connection "GroupVPN_0006B1030980" has been enabled. 2009/12/18 19:49:32:223 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 1 negotiation. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX Starting aggressive mode phase 1 exchange. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX NAT Detected: Local host is behind a NAT device. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX The SA lifetime for phase 1 is 28800 seconds. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX Phase 1 has completed. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX Received XAuth request. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX XAuth has requested a username but one has not yet been specified. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX Sending phase 1 delete. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX User authentication information is needed to complete the connection. 2009/12/18 19:49:32:393 Information An incoming ISAKMP packet from XXX.XXX.XXX.XXX was ignored. 2009/12/18 19:49:36:962 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 1 negotiation. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX Starting aggressive mode phase 1 exchange. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX NAT Detected: Local host is behind a NAT device. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX The SA lifetime for phase 1 is 28800 seconds. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX Phase 1 has completed. 2009/12/18 19:49:37:094 Information XXX.XXX.XXX.XXX Received XAuth request. 2009/12/18 19:49:37:100 Information XXX.XXX.XXX.XXX Sending XAuth reply. 2009/12/18 19:49:37:110 Information XXX.XXX.XXX.XXX Received initial contact notify. 2009/12/18 19:49:37:153 Information XXX.XXX.XXX.XXX Received XAuth status. 2009/12/18 19:49:37:154 Information XXX.XXX.XXX.XXX Sending XAuth acknowledgement. 2009/12/18 19:49:37:154 Information XXX.XXX.XXX.XXX User authentication has succeeded. 2009/12/18 19:49:37:247 Information XXX.XXX.XXX.XXX Received request for policy version. 2009/12/18 19:49:37:253 Information XXX.XXX.XXX.XXX Sending policy version reply. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX Received policy change is not required. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX Sending policy acknowledgement. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX The configuration for the connection is up to date. 2009/12/18 19:49:37:377 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 2 negotiation with 10.10.10.0/255.255.255.0:BOOTPC:BOOTPS:UDP. 2009/12/18 19:49:37:377 Information XXX.XXX.XXX.XXX Starting quick mode phase 2 exchange. 2009/12/18 19:49:37:472 Information XXX.XXX.XXX.XXX The SA lifetime for phase 2 is 28800 seconds. 2009/12/18 19:49:37:472 Information XXX.XXX.XXX.XXX Phase 2 with 10.10.10.0/255.255.255.0:BOOTPC:BOOTPS:UDP has completed. 2009/12/18 19:49:37:896 Information Renewing IP address for the virtual interface (00-60-73-4C-3F-45). 2009/12/18 19:49:40:189 Information The virtual interface has been added to the system with IP address 10.10.10.112. 2009/12/18 19:49:40:319 Information The system ARP cache has been flushed. 2009/12/18 19:49:40:576 Information XXX.XXX.XXX.XXX NetWkstaUserGetInfo returned: user: Dustin, logon domain: DT-WIN7, logon server: DT-WIN7 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX NetGetDCName failed: Could not find domain controller for this domain. 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX calling NetUserGetInfo: Server: , User: Dustin, level: 3 2009/12/18 19:49:53:460 Information XXX.XXX.XXX.XXX NetUserGetInfo returned: home dir: , remote dir: , logon script: 2009/12/18 19:49:53:466 Warning XXX.XXX.XXX.XXX Failed to execute script file \DT-WIN7netlogondomain.bat, Last Error: The network name cannot be found..

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• Apache load balancer limits with Tomcat over AJP

  - by PAS

  Hi All, I have Apache acting as a load balancer in front of 3 Tomcat servers. Occasionally, Apache returns 503 responses, which I would like to remove completely. All 4 servers are not under significant load in terms of CPU, memory, or disk, so I am a little unsure what is reaching it's limits or why. 503s are returned when all workers are in error state - whatever that means. Here are the details: Apache config: <IfModule mpm_prefork_module> StartServers 30 MinSpareServers 30 MaxSpareServers 60 MaxClients 200 MaxRequestsPerChild 1000 </IfModule> ... <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> # Tomcat HA cluster <Proxy balancer://mycluster> BalancerMember ajp://10.176.201.9:8009 keepalive=On retry=1 timeout=1 ping=1 BalancerMember ajp://10.176.201.10:8009 keepalive=On retry=1 timeout=1 ping=1 BalancerMember ajp://10.176.219.168:8009 keepalive=On retry=1 timeout=1 ping=1 </Proxy> # Passes thru track. or api. ProxyPreserveHost On ProxyStatus On # Original tracker ProxyPass /m balancer://mycluster/m ProxyPassReverse /m balancer://mycluster/m Tomcat config: <Server port="8005" shutdown="SHUTDOWN"> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> <Service name="Catalina"> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="localhost"> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Engine> </Service> </Server> Apache error log: [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.201.10:8009 (10.176.201.10) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.201.10) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.201.10 [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.201.9:8009 (10.176.201.9) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.201.9) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.201.9 [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.219.168:8009 (10.176.219.168) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.219.168) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.219.168 [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state Load balancer top info: top - 23:44:11 up 210 days, 4:32, 1 user, load average: 0.10, 0.11, 0.09 Tasks: 135 total, 2 running, 133 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.2%sy, 0.0%ni, 99.2%id, 0.1%wa, 0.0%hi, 0.1%si, 0.3%st Mem: 524508k total, 517132k used, 7376k free, 9124k buffers Swap: 1048568k total, 352k used, 1048216k free, 334720k cached Tomcat top info: top - 23:47:12 up 210 days, 3:07, 1 user, load average: 0.02, 0.04, 0.00 Tasks: 63 total, 1 running, 62 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 99.8%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097372k total, 2080888k used, 16484k free, 21464k buffers Swap: 4194296k total, 380k used, 4193916k free, 1520912k cached Catalina.out does not have any error messages in it. According to Apache's server status, it seems to be maxing out at 143 requests/sec. I believe the servers can handle substantially more load than they are, so any hints about low default limits or other reasons why this setup would be maxing out would be greatly appreciated.

  Read the article

• How to fix "ruby installation is missing psych (for YAML output)." on CentOS?

  - by ohho

  After rvm installation on CentOS 5.8: [rails@localhost ~]$ rvm -v rvm 1.16.17 [rails@localhost ~]$ which ruby ~/.rvm/rubies/ruby-1.9.3-p286/bin/ruby [rails@localhost ~]$ ruby -v ruby 1.9.3p286 (2012-10-12 revision 37165) [i686-linux] [rails@localhost ~]$ which gem ~/.rvm/rubies/ruby-1.9.3-p286/bin/gem there is a warning: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 I followed some advice: $ rvm pkg install libyaml Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/usr Please note that it's required to reinstall all rubies: rvm reinstall all --force and then: $ rvm reinstall all --force Removing /home/rails/.rvm/src/ruby-1.8.7-p371... Removing /home/rails/.rvm/rubies/ruby-1.8.7-p371... No binary rubies available for: centos/5.8/i386/ruby-1.8.7-p371. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.8.7-p371, this may take a while depending on your cpu(s)... ruby-1.8.7-p371 - #downloading ruby-1.8.7-p371, this may take a while depending on your connection... ruby-1.8.7-p371 - #extracting ruby-1.8.7-p371 to /home/rails/.rvm/src/ruby-1.8.7-p371 ruby-1.8.7-p371 - #extracted to /home/rails/.rvm/src/ruby-1.8.7-p371 Applying patch /home/rails/.rvm/patches/ruby/1.8.7/stdout-rouge-fix.patch Applying patch /home/rails/.rvm/patches/ruby/1.8.7/no_sslv2.diff ruby-1.8.7-p371 - #configuring ruby-1.8.7-p371 - #compiling ruby-1.8.7-p371 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.8.7-p371 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.8.7-p371 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.8.7-p371 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.8.7-p371 - #complete Please be aware that you just installed a ruby that requires 2 patches just to be compiled on up to date linux system. This may have known and unaccounted for security vulnerabilities. Please consider upgrading to Ruby 1.9.3-286 which will have all of the latest security patches. Making gemset ruby-1.8.7-p371 pristine. Making gemset ruby-1.8.7-p371@global pristine. Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... No binary rubies available for: centos/5.8/i386/ruby-1.9.3-p286. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #configuring ruby-1.9.3-p286 - #compiling ruby-1.9.3-p286 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.9.3-p286 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.9.3-p286 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.9.3-p286 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.9.3-p286 - #complete Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine. Too bad, the warning is still there: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 How can I get rid of the warning? UPDATE: (applying rvm reinstall 1.9.3 --movable) $ rvm reinstall 1.9.3 --movable Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/rubies/ruby-1.9.3-p286 Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 Applying patch /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch Error running 'patch -F 25 -p1 -N -f -i /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch', please read /home/rails/.rvm/log/ruby-1.9.3-p286/patch.apply.ruby-multilib.log There has been an error applying the specified patches. Halting the installation. Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine.

  Read the article

• CloudBerry Online Backup 1.5 for Windows Home Server

  - by The Geek

  Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

  Read the article

• "Translator by Moth"

  - by Daniel Moth

  This article serves as the manual for the free Windows Phone 7 app called "Translator by Moth". The app is available from the following link (browse the link on your Window Phone 7 phone, or from your PC with zune software installed): http://social.zune.net/redirect?type=phoneApp&id=bcd09f8e-8211-e011-9264-00237de2db9e   Startup At startup the app makes a connection to the bing Microsoft Translator service to retrieve the available languages, and also which languages offer playback support (two network calls total). It populates with the results the two list pickers ("from" and "to") on the "current" page. If for whatever reason the network call fails, you are informed via a message box, and the app keeps trying to make a connection every few seconds. When it eventually succeeds, the language pickers on the "current" page get updated. Until it succeeds, the language pickers remain blank and hence no new translations are possible. As you can guess, if the Microsoft Translation service add more languages for textual translation (or enables more for playback) the app will automatically pick those up. "current" page The "current" page is the main page of the app with language pickers, translation boxes and the application bar. Language list pickers The "current" page allows you to pick the "from" and "to" languages, which are populated at start time. Until these language get populated with the results of the network calls, they remain empty and disabled. When enabled, tapping on either of them brings up on a full screen popup the list of languages to pick from, formatted as English Name followed by Native Name (when the latter is known). The "to" list, in addition to the language names, indicates which languages have playback support via a * in front of the language name. When making a selection for the "to" language, and if there is text entered for translation, a translation is performed (so there is no need to tap on the "translate" application bar button). Note that both language choices are remembered between different launches of the application.   text for translation The textbox where you enter the translation is always enabled. When there is nothing entered in it, it displays (centered and in italics) text prompting you to enter some text for translation. When you tap on it, the prompt text disappears and it becomes truly empty, waiting for input via the keyboard that automatically pops up. The text you type is left aligned and not in italic font. The keyboard shows suggestions of text as you type. The keyboard can be dismissed either by tapping somewhere else on the screen, or via tapping on the Windows Phone hardware "back" button, or via taping on the "enter" key. In the latter case (tapping on the "enter" key), if there was text entered and if the "from" language is not blank, a translation is performed (so there is no need to tap on the "translate" application bar button). The last text entered is remembered between application launches. translated text The translated text appears below the "to" language (left aligned in normal font). Until a translation is performed, there is a message in that space informing you of what to expect (translation appearing there). When the "current" page is cleared via the "clear" application bar button, the translated text reverts back to the message. Note a subtle point: when a translation has been performed and subsequently you change the "from" language or the text for translation, the translated text remains in place but is now in italic font (attempting to indicate that it may be out of date). In any case, this text is not remembered between application launches. application bar buttons and menus There are 4 application bar buttons and 4 application bar menus. "translate" button takes the text for translation and translates it to the translated text, via a single network call to the bing Microsoft Translator service. If the network call fails, the user is informed via a message box. The button is disabled when there is no "from" language available or when there is not text for translation entered. "play" button takes the translated text and plays it out loud in a native speaker's voice (of the "to" language), via a single network call to the bing Microsoft Translator service. If the network call fails, the user is informed via a message box. The button is disabled when there is no "to" language available or when there is no translated text available. "clear" button clears any user text entered in the text for translation box and any translation present in the translated text box. If both of those are already empty, the button is disabled. It also stops any playback if there is one in flight. "save" button saves the entire translation ("from" language, "to" language, text for translation, and translated text) to the bottom of the "saved" page (described later), and simultaneously switches to the "saved" page. The button is disabled if there is no translation or the translation is not up to date (i.e. one of the elements have been changed). "swap to and from languages" menu swaps around the "from" and "to" languages. It also takes the translated text and inserts it in the text for translation area. The translated text area becomes blank. The menu is disabled when there is no "from" and "to" language info. "send translation via sms" menu takes the translated text and creates an SMS message containing it. The menu is disabled when there is no translation present. "send translation via email" menu takes the translated text and creates an email message containing it (after you choose which email account you want to use). The menu is disabled when there is no translation present. "about" menu shows the "about" page described later. "saved" page The "saved" page is initially empty. You can add translations to it by translating text on the "current" page and then tapping the application bar "save" button. Once a translation appears in the list, you can read it all offline (both the "from" and "to" text). Thus, you can create your own phrasebook list, which is remembered between application launches (it is stored on your device). To listen to the translation, simply tap on it – this is only available for languages that support playback, as indicated by the * in front of them. The sound is retrieved via a single network call to the bing Microsoft Translator service (if it fails an appropriate message is displayed in a message box). Tap and hold on a saved translation to bring up a context menu with 4 items: "move to top" menu moves the selected item to the top of the saved list (and scrolls there so it is still in view) "copy to current" menu takes the "from" and "to" information (language and text), and populates the "current" page with it (switching at the same time to the current page). This allows you to make tweaks to the translation (text or languages) and potentially save it back as a new item. Note that the action makes a copy of the translation, so you are not actually editing the existing saved translation (which remains intact). "delete" menu deletes the selected translation. "delete all" menu deletes all saved translations from the "saved" page – there is no way to get that info back other than re-entering it, so be cautious. Note: Once playback of a translation has been retrieved via a network call, Windows Phone 7 caches the results. What this means is that as long as you play a saved translation once, it is likely that it will be available to you for some time, even when there is no network connection.   "about" page The "about" page provides some textual information (that you can view in the screenshot) including a link to the creator's blog (that you can follow on your Windows Phone 7 device). Use that link to discover the email for any feedback. Other UI design info As you can see in the screenshots above, "Translator by Moth" has been designed from scratch for Windows Phone 7, using the nice pivot control and application bar. It also supports both portrait and landscape orientations, and looks equally good in both the light and the dark theme. Other than the default black and white colors, it uses the user's chosen accent color (which is blue in the screenshot examples above). Feedback and support Please report (via the email on the blog) any bugs you encounter or opportunities for performance improvements and they will be fixed in the next update. Suggestions for new features will be considered, but given that the app is FREE, no promises are made. If you like the app, don't forget to rate "Translator by Moth" on the marketplace. Comments about this post welcome at the original blog.

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >