Search Results

Search found 17357 results on 695 pages for 'mac on laptop'.

Page 285/695 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

  • Western Digital not recognized by Windows after power Outage on windows

    - by vikasde
    I have WD Essential Plus 1.5TB (formatted in NTFS). It was working fine under windows and mac mini. While it was connected to the mac mini, I had an power outage and now the HD is not being recognized under windows anymore. Now on the mac mini the HD is fine and I can see my data. When I use ActiveBootDisk under windows, then I can see the data as well. I updated the drivers on windows machine and also updated the firmware on the HD, but its still not being recognized. Is there any way for me to fix the HD under windows without having to re-format it?

    Read the article

  • Wireless internet connection connects but internet does not work (no packets received). Wired does.

    - by Rodney
    When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

    Read the article

  • Spoof user agent for GoGo Inflight Internet?

    - by AndyL
    Is it possible to trick the GoGo Inflight WiFi on airlines into thinking that you have a mobile device instead of a laptop? It seems like most airlines that offer in flight wireless these days use GoGo. They offer different pricing for mobile and laptops. It seems like they are checking the browser's user agent. Out of curiosity, is it possible to use a Firefox extension like this one to spoof the user-agent and allow a laptop to access the internet under a GoGo mobile plan? How would GoGo handle something like an IMAP email client, like Thunderbird. Do IMAP clients have a user-agent field as well that would normally identify whether the mail client is running on a laptop or mobile device?

    Read the article

  • Monitors - inches vs resolution

    - by Vnuk
    I'm currently moving away from living five years only on laptop to a desktop setup. I'm currently browsing for monitors and I've noticed something strange. On my laptop I have 1920x1200 on 17". To get the same resolution on a monitor I have to get Dell U2410 24" or Samsung SM2443NW 24". I do not need (or want) 7" more inches of screen, I just want the 1920x1200 resolution. Why is this setup (big resolution on less inches of screen) available on a laptop but not on a regular monitor? I'm setting this as a community wiki beacuse I think that there is no right answer here...

    Read the article

  • Rewrite URL based off of IP on OpenWRT

    - by Scott
    We are running OpenWRT on a WRT54GL. I have been looking for an answer to this, but I can't seem to figure out what to search for, if its possible, or what combination of programs to use. I want to be able to redirect a HTTP request from a WiFi device based off of their MAC address. This should all be transparent to the device. Basically we are trying to redirect any non-registered devices to a website to register the device (at this point, we would push a new config to the router that would allow this MAC address "full access"). Once a device is registered, it will be redirected to a transparent squid proxy server on another machine for caching/blocking certain sites. I looked at tinyproxy - popilo which redirects but I won't have the MAC address to know if its registered or not. Any help (google suggestions, programs, anything!) would be very much appreciated!

    Read the article

  • How to copy partition from one disc to another (boot partition keeping all the vital data)?

    - by Patryk
    I have bought a new laptop but the HDD, which runs at 5400 rpm, is not sufficient for me. The laptop runs Windows 7 64-bit. I have my 'old' one (a better one - Seagate Momentus 7200 rpm) and I would like to replace it but without reinstalling everything. And there my question arises: can I copy my boot partition from my laptop hard drive to my old drive so that it will boot from it properly? If so, then how to do it? Will Norton Ghost be useful here? My point would be to just replace this partition and leave the rest.

    Read the article

  • Integrate Python Projects Into Xcode

    - by Vynile
    Hi! I'm a Mac user, and one of my hobbies is programming. I use Xcode, the integrated IDE of Mac OS X. I started to learn Python programming langage, and I want to use Xcode for developing my scripts. I searched for weeks in the internet, but I didn't find something interesting. Firstly, I want to update the integrated interpreter of Mac OS X, that is on 2.6 version. And secondly, I want to create a Python project on Xcode easily, like I do with C & C++ projects. Can you help me? I really need help! Cordially.

    Read the article

  • My DNS cannot resolve an web site address?

    - by ipkiss
    Hello all, Recently, I could not access the webpage bbc.co.uk anymore, while I can access other websites smoothly. Ar first, I though there may be some problem with my laptop. However, if I use my laptop through my company network, I can load the page bbc.co.uk normally. Then, I though maybe my ADSL at home blocks that web address. However, I tried another laptop with my home ADSL and it can load the page bbc.co.uk very fast. Now I do not know what could be the problem. Can anyone tell me please? Thank you.

    Read the article

  • How can I force Parallels' networking to obtain an IP through a wireless router?

    - by RLH
    Here is my setup. I have a Macbook, Thunderbolt display and an Ethernet connection plugged into the Thunderbolt display. During the day, most of my network use can (and should) operate across the ethernet associated with my display. However, I also need to be able to connect up to a wireless router. This hasn't been a problem on the Mac OS X side, but the program that I need to run on the router has to obtain an IP address from the wireless access point. Considering my current setup, how can I leave it so that I can access the internet in OS X, yet have my Window 7 instance running in Parallels, get it's assigned IP address from a wireless router that my Mac is also connected to? I've fiddled around with the Parallel's network settings for an hour, and I can't get Parallel's to see the router, even though my Mac is certainly connected to it.

    Read the article

  • Personal DNS server and fallback outside home

    - by Jens
    I have my own DNS server at home to access local names, and that is working fine. Then I have my laptop, now obviously my laptop leaves the home now and then, therefore it accesses different nets outside my home, and my DNS server is not accessible there... So I figured that I would just add Google as secondary DNS... But actually, when I do that, then suddenly I can't access my local stuff (at home that is, obviously), like my laptop is getting a quicker response from Google's DNS or something, because it can't find anything on the addresses I use locally. If I then remove the secondary DNS, and keeps my own, then it works fine again... So do I somehow need to seperate what DNS's to use on what nets? I already use sepperate DNS settings when I connect using my 3G modem, but when I use hotspots it seems to use the same settings regardless (at least in the train), also can it differ wired connections?... Is there another solution?

    Read the article

  • Enable Hardware Virtualization on HP CompaqDX2420?

    - by 7alwagy
    Hey Guys, After installing vmware7, I tried to run a virtual machine with Mac OSX installed. When I tried to run this virtual machine I got an error message saying: Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Workstation supports hardware virtualization. I'v googled and found out that my processor (Intel Core 2 Duo E7500 Processor (2.93 GHz, 3 MB L2 cache, 1066 Mhz FSB)supports Hardware virtualization. Does anyone know how to enable this in order to get this virtual machine running?

    Read the article

  • Homegroup doesn't show other computers, but "Network" does

    - by McPherrinM
    I have a desktop and a laptop (both running windows 7) in my Windows 7 homegroup. The desktop created the homegroup, and the laptop joined it. Both share a few folders. On the laptop, I have no problem accessing the Desktop's shared folders via the "Homegroup" sidebar button in Windows Explorer. However, on the Desktop, I get the message No other homegroup computers are currently available in the homegroup screen. However, if I go to the Network page, I can see the other computer and browse its shared media. These shares were made by right clicking and choosing "Share with Homegroup". I can access the media, so this isn't a big problem, but I'm just confused as to why the Homegroup screen denies the existence of the other computer. Has anybody else encountered and resolved this?

    Read the article

  • Debian 6 Internet connection sharing aka IP masquerade not working

    - by Rautamiekka
    The problem: the computers [Xbox 360 and a Kubuntu 12.04.1 laptop] can't access Internet through a recently-installed desktopless Debian 6 laptop (which is wirelessly connected to a WLAN station) but addresses are successfully given by dnsmasq. The attempts: 1.1) /etc/dnsmaq.conf conffed according to http://wiki.debian.org/HowTo/dnsmasq: add lines interface=eth0 dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h 1.2) Follow http://www.cyberciti.biz/faq/rhel-fedora-linux-internet-connection-sharing-howto/ and use their script to setup iptables. 2) Follow the Ubuntu Internet Gateway Method (iptables) at https://help.ubuntu.com/community/Internet/ConnectionSharing recommended and which worked at Share internet in Linux. The Debian laptop was rebooted many times and between each attempt, with and without the script auto-executing via /etc/rc.local. While adding the iptables-restore command to that file I disabled the script.

    Read the article

  • Corporate IM with video that actually works, suggestions?

    - by Erik P. Skaalerud
    Hi. Does anyone here have a suggestion for a cross-platform IM solution wich will work with voip/video on both Windows (XP and 7) and Mac OS X from 10.4 and upwards? Right now were in a kind of mixed enviroment, with some Mac users using iChat server since they need video support (conference across several offices over VPN), but it wont't work on windows clients. The rest of us are happily using Openfire+Spark, but there's no VoIP or video avaible from what i've found, unless you want to add in several 3rd party software (like red5 and asterisk). Requirements: As said before; must work on both Windows and Mac Internal server (no Skype etc) File transfer between platforms SSO (Single Sign-On) via Active Directory authentication Some sort of screen sharing would be a plus, like switching over to a screen capture (powerpoint, software training etc) We can afford to buy software if that's needed to get this working without any hiccups across platforms. Pre-thanks to anyone who gives suggestions.

    Read the article

  • Teamviewer and Virtualbox issue: some keys don't work

    - by Barranka
    I use Teamviewer on a laptop to connect to a desktop computer running Debian Linux. On this desktop computer I run Windows inside a VirtualBox VM. I have no problems interacting directly with Linux, but when I try to interact with Windows inside Virtualbox, some keys simply don't work! (e.g. period, "@", quotes). Is there something I can do to make the full keyboard of my laptop work correctly with the Virtualbox VM inside the remote host? Specs: The remote host machine is an Intel i7 running Debian squeezy (64 bit) I'm using Teamviewer 7, on both the host machine and the laptop Thanks

    Read the article

  • Ubuntu 9.10 is not starting on netbook

    - by anonymous
    I installed Ubuntu 9.10 onto my external hard drive cause it's cool to be able to borrow a friend's laptop and be able to have my entire system. It works on the 2 systems i tested it on: my desktop and my mom's laptop. I had to work on something earlier so i borrowed my friend's netbook. I started it up, chose Ubuntu 9.10.20 and it got to the Ubuntu loading screen with the 3 people holding hands right before user selection then it suddenly went black. Naturally, i freaked out because it wasn't my laptop. I held the power button down and reset the netbook but the screen was still black, it didn't even show the BIOS. I repeated the process without my hard drive, and it was still black without the BIOS showing up. I had to remove the battery, plug it to a power source, and power up to start the netbook up again. Can anyone tell me what happened?

    Read the article

  • Disk Management Hidden Partitions - PTEDIT32

    - by Kairan
    Apparently PTEDIT32 can edit partitions, making partitions that are hidden, visible. My purpose is to take a hidden partition on a toshiba laptop (the recovery partition) and copy it as my hard drive is beginning to fail. My problem, is that I cannot find PTEDIT32 documentation on what i want to change the partition # to. I know that changing it from 27 to 7 would change it from hidden to active - but if I set it to active, I am worried it will try to launch the recovery mode (as that is what it did on a previous laptop) Here is the link I used for instructions to do this on a previous laptop: Hidden_Recovery_Link_Site So how to make the hidden partition visible without it actually RUNNING the recovery mode?

    Read the article

  • Remote connect into macbook pro at a different resolution

    - by user60277
    Hello, I have a Dell laptop with Windows 7 on it. Its resolution is 1920x1080. I want to connect to a macbook pro at that resolution. The macbook pro has a resolution of 1440x900 so when I VNC into it, I can only see 1440x900 box with black borders on full resolution. The macbook pro can drive resolutions of 2560x1440. What program do I use to connect to the macbook at full (1920x1080) resolution. I can use remote desktop and connect from the dell laptop to another dell laptop that has a 1440x900 max. resolution. However in case of Remote desktop connection I can expand the window to be 1920x1080. I'm using TightVNC viewer on Windows. Thanks

    Read the article

  • External hard drive not disconnecting and leaving 'ghost drives' on my PC

    - by Shane
    I use a Seagate FreeAgent on my laptop and PC. While it works fine most of the time, sometimes when I try to safely disconnect it, it says the files are in use. Obviously I have by that time shut down all applications. Now with my laptop, a Toshiba Satellite, I shut down the computer and unplug the Seagate and no ghost drives are found. But no matter what I do with my desktop, it continues to create 'ghost drives'. Is this due to a feature in the external hard drive, and if so, would anyone have an idea how I can fix it? I am getting tired of deleting the 'ghost drives'. Both my laptop and desktop use Windows 7.

    Read the article

  • Remote connect into macbook pro at a different resolution

    - by user60277
    Hello, I have a Dell laptop with Windows 7 on it. Its resolution is 1920x1080. I want to connect to a macbook pro at that resolution. The macbook pro has a resolution of 1440x900 so when I VNC into it, I can only see 1440x900 box with black borders on full resolution. The macbook pro can drive resolutions of 2560x1440. What program do I use to connect to the macbook at full (1920x1080) resolution. I can use remote desktop and connect from the dell laptop to another dell laptop that has a 1440x900 max. resolution. However in case of Remote desktop connection I can expand the window to be 1920x1080. I'm using TightVNC viewer on Windows. Thanks

    Read the article

  • How to automaticaly mount luks-partition only when disk is plugged in

    - by Frederick Roth
    I have the following scenario: I want to automatically backup some data from my Laptop(Fedora Core 17) to a external encrypted(luks) hard disk. The disk can be opened by a key file, which lies on the also encrypted root partition of my laptop. The hard disk is attached to my docking station and therefore only "present" when I am at home (which is approximately 1/2 of the time the Laptop runs) I have everything set up the way I want it with one exception. I don't get a decent way to mount the hard disk automatically at boot if and only if it is present. If I add it to crypttab and fstab without noauto it tries to mount it at boot and takes a lot(!) of time and error messages when it is not present. If I add noauto, well it does not mount automatically ;) Is there a way to configure luks/crypttab to do the following: check whether the disk is present if yes: decrypt/mount if no: just don't

    Read the article

  • Canot send SMS using gammu-smsd

    - by khalid hussain
    I am trying to send SMS using gammu-smsd, but it does not work. Modem: Huawei E1550 Steps: #vi /etc/gammu-smsdrc port= /dev/ttyUSB0 connection = at Then restarted gammu-smsd: # /etc/init.d/gammu-smsd restart SMS Sending test echo "Test message" | gammu-smsd-inject TEXT 335123456 It does not send SMS. Log Sep 27 14:19:25 Dell-Laptop gammu-smsd[10285]: Going to 30 seconds sleep because of too much connection errors Sep 27 14:19:55 Dell-Laptop gammu-smsd[10285]: Starting phone communication... Sep 27 14:19:55 Dell-Laptop gammu-smsd[10285]: Error at init connection: Error opening device, it doesn't exist. (DEVICENOTEXIST[4])

    Read the article

  • Can't add German as input language in Windows XP

    - by jdm
    I have a laptop that was brought to a computer shop for a hard disk problem. They replaced the disk and reinstalled windows XP, although the English version (the laptop has a German keyboard). I'd like to switch the input language to German. Usually I know how to do this (via "Regional and Language Options"), the problem is when I choose Languages/Details/Add... it doesn't offer me the German keyboard layout: It also uses the "Standard 101/102-Key or Microsoft Natural PS/2 Keyboard" driver - the laptop's keyboard is a 104/105 key German version. I can't seem to change this. Did I just miss the setting, or what is going on here?

    Read the article

  • Windows printing: printer works locally, but over network it can't find driver

    - by JudahGabriel
    A friend has a Epson Stylus RX500 printer. She wants to share it between her WinXP desktop and her Win7 laptop. The printer is connected direct to her WinXP desktop, and she can print fine from there. But the Win7 laptop can't print -- it can see the shared printer on the network, but it can't find a driver for it. (And looking on the web, I don't see any Win7 drivers for it.) However, if I connect the printer directly to the Win7 laptop, it works, it can print. This suggests that there is a driver for it, but for some reason, it can't find a driver when connecting to the printer over the network. My question is: if a printer works when connected directly to the machine, should it still work over the local network?

    Read the article

  • I just ordered 70/10 line, and need a new router I think?

    - by data_jepp
    Before I had the 25/5 line and the n standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2,5 and 5ghz? Can my laptop be connected at once over both bandwidths? And that would let me use the full 70Mb over wifi? Hope it's ok to ask network questions here.

    Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >