Search Results

Search found 9273 results on 371 pages for 'complex strings'.

Page 286/371 | < Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >

  • Strange rare out-of-order data received using Indy

    - by Jim
    We're having a bizarre problem with Indy10 where two large strings (a few hundred characters each) that we send out one after the other are appearing at the other end intertwined oddly. This happens extremely infrequently. Each string is a complete XML message terminated with a LF and in general the READ process reads an entire XML message, returning when it sees the LF. The call to actually send the message is protected by a critical section around the call to the IOHandler's writeln method and so it is not possible for two threads to send at the same time. (We're certain the critical section is implemented/working properly). This problem happens very rarely. The symptoms are odd...when we send string A followed by string B what we received at the other end (on the rare occasions where we have failure) is the trailing section of string A by itself (i.e., there's a LF at the end of it) followed by the leading section of string A and then the entire string B followed by a single LF. We've verified that the "timed out" property is not true after the partial read - we log that property after every read that returns content. Also, we know there are no embedded LF characters in the string, as we explicitly replace all non-alphanumeric characters in the string with spaces before appending the LF and sending it. We have log mechanisms inside the critical sections on both the transmission and receiving ends and so we can see this behavior at the "wire". We're completely baffled and wondering (although always the lowest possibility) whether there could be some low-level Indy issues that might cause this issue, e.g., buffers being sent in the wrong order....very hard to believe this could be the issue but we're grasping at straws. Does anyone have any bright ideas?

    Read the article

  • ASP.NET/C# - Deserialize XML, XSD.exe created multiple classes

    - by Barryman9000
    I'm trying to deserialize some XML (returned from a web service) into an object that I created using XSD.exe. The XSD executable created a .CS file with a different partial class for each parent node in the XML. For Example, the beginning of the XML looks like this (why can't I post xml here? sorry, this is ugly): <disclaimer><notificationDescription>Additional charges will apply.</notificationDescription></disclaimer><quote><masterQuote></masterQuote></quote> And the Class generated by the XSD.exe has a partial class named disclaimer with a get; set; string for notificationDescription. And another partial class for quoteMasterQuote with the corresponding child nodes as public strings. How can I deserialize this XML file into multiple classes? I found this code, but it seems like it'll only work for one object. public static PricingResponse2 DeSerialize(string _xml) { PricingResponse2 _resp = new PricingResponse2(); StringReader _strReader = new StringReader(_xml); XmlSerializer _serializer = new XmlSerializer(_resp.GetType()); XmlReader _xmlReader = new XmlTextReader(_strReader); try { _resp = (PricingResponse2)_serializer.Deserialize(_xmlReader); return _resp; } catch (Exception ex) { string _error = ex.Message; throw; } finally { _xmlReader.Close(); _strReader.Close(); _strReader.Dispose(); } } This is the first time I've tried this, so I'm a little lost.

    Read the article

  • Why is Assembly.GetCustomAttributes suddenly throwing TypeLoadException on build machine with Silver

    - by andrej351
    A short while back i had to display the current version of our Silverlight app. After some googling the following code gave me the desired result: var fileVersionAttributes = typeof(MyClass).Assembly. GetCustomAttributes(typeof(AssemblyFileVersionAttribute), false) as AssemblyFileVersionAttribute[]; var version = fileVersionAttributes[0].Version; This worked a treat in our .NET 3.5 Silverlight 3 environment. However, we recently upgraded to .NET 4 and Silverlight 4. We just finished getting our build machine working and found that the unit test for this code was throwing the following exception: Exception Message: System.TypeLoadException: Error 0x80131522. Debugging resource strings are unavailable. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50106.0&File=mscorrc.dll&Key=0x80131522 at System.ModuleHandle.ResolveType(ModuleHandle module, Int32 typeToken, RuntimeTypeHandle* typeInstArgs, Int32 typeInstCount, RuntimeTypeHandle* methodInstArgs, Int32 methodInstCount) at System.ModuleHandle.ResolveTypeHandle(Int32 typeToken, RuntimeTypeHandle[] typeInstantiationContext, RuntimeTypeHandle[] methodInstantiationContext) at System.Reflection.Module.ResolveType(Int32 metadataToken, Type[] genericTypeArguments, Type[] genericMethodArguments) at System.Reflection.CustomAttribute.FilterCustomAttributeRecord(CustomAttributeRecord caRecord, MetadataImport scope, Assembly& lastAptcaOkAssembly, Module decoratedModule, MetadataToken decoratedToken, RuntimeType attributeFilterType, Boolean mustBeInheritable, Object[] attributes, IList derivedAttributes, RuntimeType& attributeType, RuntimeMethodHandle& ctor, Boolean& ctorHasParameters, Boolean& isVarArg) at System.Reflection.CustomAttribute.GetCustomAttributes(Module decoratedModule, Int32 decoratedMetadataToken, Int32 pcaCount, RuntimeType attributeFilterType, Boolean mustBeInheritable, IList derivedAttributes, Boolean isDecoratedTargetSecurityTransparent) at System.Reflection.CustomAttribute.GetCustomAttributes(Module decoratedModule, Int32 decoratedMetadataToken, Int32 pcaCount, RuntimeType attributeFilterType, Boolean isDecoratedTargetSecurityTransparent) at System.Reflection.CustomAttribute.GetCustomAttributes(Assembly assembly, Type caType) at System.Reflection.Assembly.GetCustomAttributes(Type attributeType, Boolean inherit) at MyCode.VersionTest() I have never seen this exception before and the link in it points nowhere. It is only throwing on the build machine and not on my development box, so i'm going through a process of trial and error to see any differences between the two. Any idea why this might be happening?? Cheers, Andrej.

    Read the article

  • C# - InvalidCastException when fetching double from sqlite

    - by Irro
    I keep getting a InvalidCastException when I'm fetching any double from my SQLite database in C#. The exception says "Specified cast is not valid." I am able to see the value in a SQL manager so I know it exists. It is possible to fetch Strings (VARCHARS) and ints from the database. I'm also able to fetch the value as an object but then I get "66.0" when it's suppose to be "66,8558604947586" (latitude coordination). Any one who knows how to solve this? My code: using System.Data.SQLite; ... SQLiteConnection conn = new SQLiteConnection(@"Data Source=C:\\database.sqlite; Version=3;"); conn.Open(); SQLiteDataReader reader = getReader(conn, "SELECT * FROM table"); //These are working String name = reader.GetString(1); Int32 value = reader.GetInt32(2); //This is not working Double latitude = reader.getDouble(3); //This gives me wrong value Object o = reader[3]; //or reader["latitude"] or reader.getValue(3)

    Read the article

  • Allowed unicode characters in IDN host labels

    - by Roland Franssen
    Hi all, Im currently working on a "proper" URI validator and currently it all comes down to hostname validation, the rest isnt that tricky. Im stuck at IDN hostname labels (e.g. containing unicode; possible punycode encoded strings have been decoded at this point). My first idea was basicly a regex for TLD's not supporting IDN and one for those who do (http://www.mozilla.org/projects/security/tld-idn-policy-list.html (?)). Respectively; ^[a-zA-Z0-9-]+$ and ^[a-zA-Z0-9-\p{L}]+$ However this is not an ideal situation, since every IDN registrar can decide which characters to allow and which not. What im looking for is a proper, consistent, up2date data table of unicode characters allowed in various TLD's; im getting this idea i have to find all the data myself at russian and chinese registry sites (which is quite difficult). So before spitting down the web.. i wondered is there such a list? Or are there better approaches, best/common practices etc? (I want the validation to be as strict as possible.) Any help is welcome! // Roland

    Read the article

  • Over-enthusiastic Intellisense in VS2010 - can I tweak it?

    - by CJM
    Since I have upgraded from VS2008 to VS2010, I've been having an increasingly infuriating battle with the Intellisense. For example, when specifying CSS styles, when I press Enter to start an new line, Intellisense (appropriately) lists available Styles to me. And if I select color and then type ':', it presents a list of color presets - often helpful. However, if I type in a space (I like them for readability) or if I type '#' to enter RGB values, it selected the default Intellisense selection, in this case inherits. Another example is in an ASP.NET page - say I am concatenating strings, I type myString =, I get an Intellisense pop-up. If I type space or '"' (to enter a literal) or '.' (so select a property or method within a WITH block), the Intellisense selects the first entry in the list. I can dismiss the Intellisense pop-ups with escape but it makes it incredibly slow to code. This behaviour is different to my VS2008 set-up. I can't seem to find any way to configure Intellisense to behave differently... I really only want it to select and Intellisense entry when I type or ... at least, certainly not when I type '"' or ' ' or '.'!

    Read the article

  • Increase Query Speed in PostgreSQL

    - by Anthoni Gardner
    Hello, First time posting here, but an avid reader. I am experiancing slow query times on my database (all tested locally thus far) and not sure how to go about it. The database itself has 44 tables and some of them tables have over 1 Million records (mainly the movies, actresses and actors tables). The table is made via JMDB using the flat files on IMDB. Also the SQL query that I am about to show is from that said program (that too experiances very slow search times). I have tried to include as much information as I can, such as the explain plan etc. "QUERY PLAN" "HashAggregate (cost=46492.52..46493.50 rows=98 width=46)" " Output: public.movies.title, public.movies.movieid, public.movies.year" " - Append (cost=39094.17..46491.79 rows=98 width=46)" " - HashAggregate (cost=39094.17..39094.87 rows=70 width=46)" " Output: public.movies.title, public.movies.movieid, public.movies.year" " - Seq Scan on movies (cost=0.00..39093.65 rows=70 width=46)" " Output: public.movies.title, public.movies.movieid, public.movies.year" " Filter: (((title)::text ~~* '%Babe%'::text) AND ((title)::text !~~* '""%}'::text))" " - Nested Loop (cost=0.00..7395.94 rows=28 width=46)" " Output: public.movies.title, public.movies.movieid, public.movies.year" " - Seq Scan on akatitles (cost=0.00..7159.24 rows=28 width=4)" " Output: akatitles.movieid, akatitles.language, akatitles.title, " Filter: (((title)::text ~~* '%Babe%'::text) AND ((title)::text !~~* '""%}'::text))" " - Index Scan using movies_pkey on movies (cost=0.00..8.44 rows=1 width=46)" " Output: public.movies.movieid, public.movies.title, public.movies.year, public.movies.imdbid" " Index Cond: (public.movies.movieid = akatitles.movieid)" SELECT * FROM ((SELECT DISTINCT title, movieid, year FROM movies WHERE title ILIKE '%Babe%' AND NOT (title ILIKE '"%}')) UNION (SELECT movies.title, movies.movieid, movies.year FROM movies INNER JOIN akatitles ON movies.movieid=akatitles.movieid WHERE akatitles.title ILIKE '%Babe%' AND NOT (akatitles.title ILIKE '"%}'))) AS union_tmp2; Returns 612 Rows in 9078ms Database backup (plain text) is 1.61GB It's a really complex query and I am not fully cognizant on it, like I said it was spat out by JMDB. Do you have any suggestions on how I can increase the speed ? Regards Anthoni

    Read the article

  • Using ComplexType with ToList causes InvalidOperationException

    - by Chris Paynter
    I have this model namespace ProjectTimer.Models { public class TimerContext : DbContext { public TimerContext() : base("DefaultConnection") { } public DbSet<Project> Projects { get; set; } public DbSet<ProjectTimeSpan> TimeSpans { get; set; } } public class DomainBase { [Key] public int Id { get; set; } } public class Project : DomainBase { public UserProfile User { get; set; } public string Name { get; set; } public string Description { get; set; } public IList<ProjectTimeSpan> TimeSpans { get; set; } } [ComplexType] public class ProjectTimeSpan { public DateTime TimeStart { get; set; } public DateTime TimeEnd { get; set; } public bool Active { get; set; } } } When I try to use this action I get the exception The type 'ProjectTimer.Models.ProjectTimeSpan' has already been configured as an entity type. It cannot be reconfigured as a complex type. public ActionResult Index() { using (var db = new TimerContext()) { return View(db.Projects.ToList); } } The view is using the model @model IList<ProjectTimer.Models.Project> Can any one shine some light as to why this would be happening?

    Read the article

  • Render view to string followed by redirect results in exception

    - by Chris Charabaruk
    So here's the issue: I'm building e-mails to be sent by my application by rendering full view pages to strings and sending them. This works without any problem so long as I'm not redirecting to another URL on the site afterwards. Whenever I try, I get "System.Web.HttpException: Cannot redirect after HTTP headers have been sent." I believe the problem comes from the fact I'm reusing the context from the controller action where the call for creating the e-mail comes from. More specifically, the HttpResponse from the context. Unfortunately, I can't create a new HttpResponse that makes use of HttpWriter because the constructor of that class is unreachable, and using any other class derived from TextWriter causes response.Flush() to throw an exception, itself. Does anyone have a solution for this? public static string RenderViewToString( ControllerContext controllerContext, string viewPath, string masterPath, ViewDataDictionary viewData, TempDataDictionary tempData) { Stream filter = null; ViewPage viewPage = new ViewPage(); //Right, create our view viewPage.ViewContext = new ViewContext(controllerContext, new WebFormView(viewPath, masterPath), viewData, tempData); //Get the response context, flush it and get the response filter. var response = viewPage.ViewContext.HttpContext.Response; //var response = new HttpResponseWrapper(new HttpResponse // (**TextWriter Goes Here**)); response.Flush(); var oldFilter = response.Filter; try { //Put a new filter into the response filter = new MemoryStream(); response.Filter = filter; //Now render the view into the memorystream and flush the response viewPage.ViewContext.View.Render(viewPage.ViewContext, viewPage.ViewContext.HttpContext.Response.Output); response.Flush(); //Now read the rendered view. filter.Position = 0; var reader = new StreamReader(filter, response.ContentEncoding); return reader.ReadToEnd(); } finally { //Clean up. if (filter != null) filter.Dispose(); //Now replace the response filter response.Filter = oldFilter; } }

    Read the article

  • sproutcore vs javascriptMVC for web app development

    - by swami
    Hi, I want to use a javascript framework with MVC for a complex web application (which will be one of a set of related apps and pages) for an intranet in a digital archives. I have been looking at SproutCore and JavascriptMVC. I want to choose one framework and stick with it. Does anybody know what the distinguishing features are when comparing these two? I want something that is simple, straightforward that I can customize/hack easily, and that doesn't get in my way too much, but that at the same time gives me a basis for keeping my code nicely organized, and event-driven. I also plan on using jquery substantially. I know sproutcore is backed by Apple, and looks like it is getting more popular by the day, and it has a nice green website :), whereas JavascriptMVC looks less professional, with less of a following and less momentum behind it. I've done the tutorials for both and I was impressed by SproutCore more (in the JMVC tutorial you don't really do anything substantial) - but somewhere in the back of my mind I feel that JMVC might just be better because it doesn't try and do too much - it just gives you MVC functionality based on a couple of jquery plugins, and you can use jquery for everything else, so its flexible. Whereas SproutCore seems to have more of its own API etc... which is also nice in a way... but then you're kind of stuck within that.... hmmm I'm confused :). Any thoughts would be much appreciated.

    Read the article

  • How to have Android Service communicate with Activity

    - by Scott Saunders
    I'm writing my first Android application and trying to get my head around communication between services and activities. I have a Service that will run in the background and do some gps and time based logging. I will have an Activity that will be used to start and stop the Service. So first, I need to be able to figure out if the Service is running when the Activity is started. There are some other questions here about that, so I think I can figure that out (but feel free to offer advice). My real problem: if the Activity is running and the Service is started, I need a way for the Service to send messages to the Activity. Simple Strings and integers at this point - status messages mostly. The messages will not happen regularly, so I don't think polling the service is a good way to go if there is another way. I only want this communication when the Activity has been started by the user - I don't want to start the Activity from the Service. In other words, if you start the Activity and the Service is running, you will see some status messages in the Activity UI when something interesting happens. If you don't start the Activity, you will not see these messages (they're not that interesting). It seems like I should be able to determine if the Service is running, and if so, add the Activity as a listener. Then remove the Activity as a listener when the Activity pauses or stops. Is that actually possible? The only way I can figure out to do it is to have the Activity implement Parcelable and build an AIDL file so I can pass it through the Service's remote interface. That seems like overkill though, and I have no idea how the Activity should implement writeToParcel() / readFromParcel(). Is there an easier or better way? Thanks for any help.

    Read the article

  • Proper use of HTTP status codes in a "validation" server

    - by Romulo A. Ceccon
    Among the data my application sends to a third-party SOA server are complex XMLs. The server owner does provide the XML schemas (.xsd) and, since the server rejects invalid XMLs with a meaningless message, I need to validate them locally before sending. I could use a stand-alone XML schema validator but they are slow, mainly because of the time required to parse the schema files. So I wrote my own schema validator (in Java, if that matters) in the form of an HTTP Server which caches the already parsed schemas. The problem is: many things can go wrong in the course of the validation process. Other than unexpected exceptions and successful validation: the server may not find the schema file specified the file specified may not be a valid schema file the XML is invalid against the schema file Since it's an HTTP Server I'd like to provide the client with meaningful status codes. Should the server answer with a 400 error (Bad request) for all the above cases? Or they have nothing to do with HTTP and it should answer 200 with a message in the body? Any other suggestion? Update: the main application is written in Ruby, which doesn't have a good xml schema validation library, so a separate validation server is not over-engineering.

    Read the article

  • Code for decoding/encoding a modified base64 URL

    - by Kirk Liemohn
    I want to base64 encode data to put it in a URL and then decode it within my HttpHandler. I have found that Base64 Encoding allows for a '/' character which will mess up my UriTemplate matching. Then I found that there is a concept of a "modified Base64 for URL" from wikipedia: A modified Base64 for URL variant exists, where no padding '=' will be used, and the '+' and '/' characters of standard Base64 are respectively replaced by '-' and '_', so that using URL encoders/decoders is no longer necessary and has no impact on the length of the encoded value, leaving the same encoded form intact for use in relational databases, web forms, and object identifiers in general. Using .NET I want to modify my current code from doing basic base64 encoding and decoding to using the "modified base64 for URL" method. Has anyone done this? To decode, I know it starts out with something like: string base64EncodedText = base64UrlEncodedText.Replace('-', '+').Replace('_', '/'); // Append '=' char(s) if necessary - how best to do this? // My normal base64 decoding now uses encodedText But, I need to potentially add one or two '=' chars to the end which looks a little more complex. My encoding logic should be a little simpler: // Perform normal base64 encoding byte[] encodedBytes = Encoding.UTF8.GetBytes(unencodedText); string base64EncodedText = Convert.ToBase64String(encodedBytes); // Apply URL variant string base64UrlEncodedText = base64EncodedText.Replace("=", String.Empty).Replace('+', '-').Replace('/', '_'); I have seen the Guid to Base64 for URL StackOverflow entry, but that has a known length and therefore they can hardcode the number of equal signs needed at the end.

    Read the article

  • Integration tests in Continuous Integration environment: Database and filesystem state

    - by dario_ramos
    I'm trying to implement automated integration tests for my application. It's a very complex monster. You could say that its database and part of the filesystem are part of its state, because it saves image files in the hard drive, and references to those in the DB. The software needs all those, in a coherent state, to work properly. Back to writing tests: To run any relevant test, I need some image files in the filesystem, and certain records filled in the database. I thought of putting all of these in a separate folder called TestEnvironmentData in the repository, and retrieving them from the Continuous Integration Server (Team City), but a colleague said the repo is quite full as it is, and that I should set up a special directory, and databases, only in the Continuous Integration server. I don't like that because the tests success depend on me manually mantaining stuff in the server, and restoring initial state before every test becomes cumbersome. What do you guys do when you need to write integration tests for an app like this? The main goal is having an automated test harness to approach a large scale refactoring. There's lots of spaghetti code and the app's current architecture is hardly unit testable, that's why I decided on integration tests first. Any alternative approach is welcome.

    Read the article

  • error with "pmem.c" compiling linux source code for android

    - by Preetam
    I am compiling linux source code for android emulator. When i execute make command(for building and cross-compiling the linux source) i get the following error "pmem.c" file. root@ubuntu:~/common# make CHK include/linux/version.h CHK include/linux/utsrelease.h SYMLINK include/asm - include/asm-x86 CALL scripts/checksyscalls.sh CHK include/linux/compile.h CC drivers/misc/pmem.o drivers/misc/pmem.c:441: error: conflicting types for ‘phys_mem_access_prot’ /home/preetam/common/arch/x86/include/asm/pgtable.h:383: note: previous declaration of ‘phys_mem_access_prot’ was here drivers/misc/pmem.c: In function ‘flush_pmem_file’: drivers/misc/pmem.c:805: error: implicit declaration of function ‘dmac_flush_range’ drivers/misc/pmem.c: In function ‘pmem_setup’: drivers/misc/pmem.c:1265: error: implicit declaration of function ‘ioremap_cached’ drivers/misc/pmem.c:1266: warning: assignment makes pointer from integer without a cast make[2]: * [drivers/misc/pmem.o] Error 1 make[1]: [drivers/misc] Error 2 make: ** [drivers] Error 2 root@ubuntu:~/common# how to resolve this error. It seems that there may some problems in the "pmem.c" file and i'll have to choose different git repository. but that would be a very complex thing, as now i have already done most of the things till here. I might have to see correct version of this file. please someone tell what should i do? how to solve this errors. please help..thankyou!

    Read the article

  • C# FileStream position is off after calling ReadLine()

    - by Cristi Diaconescu
    I'm trying to read a (small-ish) file in chunks of a few lines at a time, and I need to return to the beginning of particular chunks. The problem is, after the very first call to streamReader.ReadLine(); the streamReader.BaseStream.Position property is set to the end of the file! Now I assume some caching is done in the backstage, but I was expecting this property to reflect the number of bytes that I used from that file. For instance, calling ReadLine() again will (naturally) return the next line in the file, which does not start at the position previously reported by streamReader.BaseStream.Position. My question is, how can I find the actual position where the 1st line ends, so I can return there later? I can only think of manually doing the bookkeeping, by adding the lengths of the strings returned by ReadLine(), but even here there are a couple of caveats: ReadLine() strips the new-line character(s) which may have a variable length (is is '\n' ? is it "\r\n" ? etc) I'm not sure if this would work ok with variable-length characters ...so right now it seems like my only option is to rethink how I parse the file, so I don't have to rewind. If it helps, I open my file like this: using (var reader = new StreamReader( new FileStream(m_path, FileMode.Open, FileAccess.Read, FileShare.ReadWrite))) {...} Any suggestions?

    Read the article

  • An alternative to reading input from Java's System.in

    - by dvanaria
    I’m working on the UVa Online Judge problem set archive as a way to practice Java, and as a way to practice data structures and algorithms in general. They give an example input file to submit to the online judge to use as a starting point (it’s the solution to problem 100). Input from the standard input stream (java.lang.System.in) is required as part of any solution on this site, but I can’t understand the implementation of reading from System.in they give in their example solution. It’s true that the input file could consist of any variation of integers, strings, etc, but every solution program requires reading basic lines of text input from System.in, one line at a time. There has to be a better (simpler and more robust) method of gathering data from the standard input stream in Java than this: public static String readLn(int maxLg) { byte lin[] = new byte[maxLg]; int lg = 0, car = -1; String line = “”; try { while (lg < maxLg) { car = System.in.read(); if ((car < 0) || (car == ‘\n’)) { break; } lin[lg++] += car; } } catch (java.io.IOException e) { return (null); } if ((car < 0) && (lg == 0)) { return (null); // eof } return (new String(lin, 0, lg)); } I’m really surprised by this. It looks like something pulled directly from K&R’s “C Programming Language” (a great book regardless), minus the access level modifer and exception handling, etc. Even though I understand the implementation, it just seems like it was written by a C programmer and bypasses most of Java’s object oriented nature. Isn’t there a better way to do this, using the StringTokenizer class or maybe using the split method of String or the java.util.regex package instead?

    Read the article

  • Attempting my first fortran 95 program, to solve quadratic eqn. Getting weird errors.

    - by Damon
    So, I'm attempting my first program in Fortran, trying to solve quadratic eqn. I have double and triple checked my code and don't see anything wrong. I keep getting "Invalid character in name at (1)" and "Unclassifiable statement at (1)" at various locations. Any help would be greatly appreciated... ! This program solves quadratic equations ! of the form ax^2 + bx + c = 0. ! Record: ! Name: Date: Notes: ! Damon Robles 4/3/10 Original Code PROGRAM quad_solv IMPLICIT NONE ! Variables REAL :: a, b, c REAL :: discrim, root1, root2, COMPLEX :: comp1, comp2 CHARACTER(len=1) :: correct ! Prompt user for coefficients. WRITE(*,*) "This program solves quadratic equations " WRITE(*,*) "of the form ax^2 + bx + c = 0. " WRITE(*,*) "Please enter the coefficients a, b, and " WRITE(*,*) "c, separated by commas:" READ(*,*) a, b, c WRITE(*,*) "Is this correct: a = ", a, " b = ", b WRITE(*,*) " c = ", c, " [Y/N]? " READ(*,*) correct IF correct = N STOP IF correct = Y THEN ! Definition discrim = b**2 - 4*a*c ! Calculations IF discrim > 0 THEN root1 = (-b + sqrt(discrim))/(2*a) root2 = (-b - sqrt(discrim))/(2*a) WRITE(*,*) "This equation has two real roots. " WRITE(*,*) "x1 = ", root1 WRITE(*,*) "x2 = ", root2 IF discrim = 0 THEN root1 = -b/(2*a) WRITE(*,*) "This equation has a double root. " WRITE(*,*) "x1 = ", root1 IF discrim < 0 THEN comp1 = (-b + sqrt(discrim))/(2*a) comp2 = (-b - sqrt(discrim))/(2*a) WRITE(*,*) "x1 = ", comp1 WRITE(*,*) "x2 = ", comp2 PROGRAM END quad_solv Thanks in advance!

    Read the article

  • How to test IO code in JUnit?

    - by add
    I'm want to test two services: service which builds file name service which writes some data into file provided by 1st service In first i'm building some complex file structure (just for example {user}/{date}/{time}/{generatedId}.bin) In second i'm writing data to the file passed by first service (1st service calls 2nd service) How can I test both services using mocks without making any real IO interractions? Just for example: 1st service: public class DefaultLogService implements LogService { public void log(SomeComplexData data) { serializer.write(new FileOutputStream(buildComplexFileStructure()), data); or serializer.write(buildComplexFileStructure(), data); or serializer.write(new GenericInputEntity(buildComplexFileStructure()), data); } private ComplextDataSerializer serializer; // mocked in tests } 2nd service: public class DefaultComplexDataSerializer implements ComplexDataSerializer { void write(InputStream stream, SomeComplexData data) {...} or void write(File file, SomeCompexData data) {...} or void write(GenericInputEntity entity, SomeComplexData data) {...} } In first case i need to pass FileOutputStream which will create a file (i.e. i can't test 1st service) In second case i need to pass File. What can i do in 2nd service test if I need to test data which will be written to specified file? (i can't test 2nd service) In third case i think i need some generic IO object which will wrap File. Maybe there is some ready-to-use solution for this purpose?

    Read the article

  • Jackson object mapping - map incoming JSON field to protected property in base class

    - by Pete
    We use Jersey/Jackson for our REST application. Incoming JSON strings get mapped to the @Entity objects in the backend by Jackson to be persisted. The problem arises from the base class that we use for all entities. It has a protected id property, which we want to exchange via REST as well so that when we send an object that has dependencies, hibernate will automatically fetch these dependencies by their ids. Howevery, Jackson does not access the setter, even if we override it in the subclass to be public. We also tried using @JsonSetter but to no avail. Probably Jackson just looks at the base class and sees ID is not accessible so it skips setting it... @MappedSuperclass public abstract class AbstractPersistable<PK extends Serializable> implements Persistable<PK> { @Id @GeneratedValue(strategy = GenerationType.AUTO) private PK id; public PK getId() { return id; } protected void setId(final PK id) { this.id = id; } Subclasses: public class A extends AbstractPersistable<Long> { private String name; } public class B extends AbstractPersistable<Long> { private A a; private int value; // getter, setter // make base class setter accessible @Override @JsonSetter("id") public void setId(Long id) { super.setId(id); } } Now if there are some As in our database and we want to create a new B via the REST resource: @POST @Consumes(MediaType.APPLICATION_JSON) @Produces(MediaType.APPLICATION_JSON) @Transactional public Response create(B b) { if (b.getA().getId() == null) cry(); } with a JSON String like this {"a":{"id":"1","name":"foo"},"value":"123"}. The incoming B will have the A reference but without an ID. Is there any way to tell Jackson to either ignore the base class setter or tell it to use the subclass setter instead? I've just found out about @JsonTypeInfo but I'm not sure this is what I need or how to use it. Thanks for any help!

    Read the article

  • FasterCSV Parsing issue?

    - by Schroedinger
    G'day guys, I'm currently using fastercsv to construct ActiveRecord elements and I can't for the life of me see this bug (tired), but for some reason when it creates, if in the rake file i output the column I want to save as the element value, it puts out correctly, as either a Trade or a Quote but when I try to save it into the activerecord, it won't work. FasterCSV.foreach("input.csv", :headers => true) do |row| d = DateTime.parse(row[1]+" "+row[2]) offset = Rational(row[3].to_i,24) o = d.new_offset(offset) t = Trade.create( :name => row[0], :type => row[4], :time => o, :price => row[6].to_f, :volume => row[7].to_i, :bidprice => row[10].to_f, :bidsize => row[11].to_i, :askprice => row[14].to_f, :asksize => row[15].to_i ) end Ideas? Name and Type are both strings, every other value works except for type. Have I missed something really simple?

    Read the article

  • Unit Testing - Validation of ViewModel ASP.NET MVC 2

    - by dean nolan
    I am currently unit testing a service that adds users to a repository. I am using dependency injection to test using a fake repository. The repository has a method CreateUser(User user) which just adds it to the database or in this case a List of Users. The logic for the creation is in the UserServices class. The application has a form for creating a user that requires some properties such as name and address. This is an MVC 2 app and I will be using the new validation using data annotations. This makes me wonder about a few things: 1) Should I annotate a POCO object that will map to the database? Or should I create a specific View Model that has these annotations and pass this data to the UserServices class? 2)Should the UserServicesClass also check this data? Would I best be constructing a Usr out of the ViewModel and passing this into the Service as a parameter? 3) The actual unit testing would depend on 2), I either populate a User object and pass that in, or I pass a large list of strings to the method CreateUser. Writing this out I get a basic idea that I should probably annotate the view model only, pass in a user (constructed by the view model if the data is valid) and also just construct the user in the unit test also. Is this the best way to go?

    Read the article

  • Using YQL multi-query & XPath to parse HTML, how to escape nested quotes?

    - by Tivac
    The title is more complicated than it has to be, here's the problem query. SELECT * FROM query.multi WHERE queries=" SELECT * FROM html WHERE url='http://www.stumbleupon.com/url/http://www.guildwars2.com' AND xpath='//li[@class=\"listLi\"]/div[@class=\"views\"]/a/span'; SELECT * FROM xml WHERE url='http://services.digg.com/1.0/endpoint?method=story.getAll&link=http://www.guildwars2.com'; SELECT * FROM json WHERE url='http://api.tweetmeme.com/url_info.json?url=http://www.guildwars2.com'; SELECT * FROM xml WHERE url='http://api.facebook.com/restserver.php?method=links.getStats&urls=http://www.guildwars2.com'; SELECT * FROM json WHERE url='http://www.reddit.com/button_info.json?url=http://www.guildwars2.com'" Specifically this line, xpath='//li[@class=\"listLi\"]/div[@class=\"views\"]/a/span' It's problematic because of the quoting, I have to nest them three levels deep and I've run out of quote characters to use. I've tried the following variations without success: //no attribute quoting xpath='//li[@class=listLi]/div[@class=views]/a/span' //try to quote attribute w/ backslash & single quote xpath='//li[@class=\'listLi\']/div[@class=\'views\']/a/span' //try to quote attribute w/ backslash & double quote xpath='//li[@class=\"listLi\"]/div[@class=\"views\"]/a/span' //try to quote attribute with double single quotes, like SQL xpath='//li[@class=''listLi'']/div[@class=''views'']/a/span' //try to quote attribute with double double quotes, like SQL xpath='//li[@class=""listLi""]/div[@class=""views""]/a/span' //try to quote attribute with quote entities xpath='//li[@class=&quot;listLi&quot;]/div[@class=&quot;views&quot;]/a/span' //try to surround XPath with backslash & double quote xpath=\"//li[@class='listLi']/div[@class='views']/a/span\" //try to surround XPath with double double quote xpath=""//li[@class='listLi']/div[@class='views']/a/span"" All without success. I don't see much out there about escaping XPath strings but everything I've found seems to be variations on using concat (which won't help because neither ' nor " are available) or html entities. Not using quotes for the attributes doesn't throw an error but fails because it's not the actual XPath string I need. I don't see anything in the YQL docs about how to handle escaping. I'm aware of how edge-casey this is but was hoping they'd have some sort of escaping guide.

    Read the article

  • Winform User Settings - Allow multiple choice values at Runtime

    - by Refracted Paladin
    I created a simple User Settings Dialog by binding the Property.Settings to a PropertyGrid. This works like a charm but now I would like to allow only certain choices for some values. I have noticed that some Types will give a dropdown of possible choices. This is what I am shooting for but for, say, Strings. Example, one of the Settings is UserTheme which is a String. Black, Blue, Silver. The program reads that string from the Settings File and sets the Theme on Startup. I can type in a correct theme and it works but if I type in Pink it will not as there is not a pink option. This is my VERY simple UserSettingsForm code. #region FIELDS internal Settings userSettings; #endregion #region EVENTS private void frmEditUserControl_Load(object sender, EventArgs e) { userSettings = Settings.Default; this.propertyGrid1.SelectedObject = userSettings; this.propertyGrid1.PropertySort = PropertySort.Alphabetical; } private void btnSave_Click(object sender, EventArgs e) { userSettings.Save(); //this.DialogResult = DialogResult.OK; this.Close(); } private void btnCancel_Click(object sender, EventArgs e) { userSettings.Reload(); this.Close(); } #endregion

    Read the article

  • Add KO "data-bind" attribute on $(document).ready

    - by M.Babcock
    Preface I've rarely ever been a JS developer and this is my first attempt at doing something with Knockout.js. The question to follow likely illustrates both points. Backgound I have a fairly complex MVC3 application that I'm trying to get to work with KO (v2.0.0.0). My MVC app is designed to generically control which fields appear in the view (and how they are added to the view). It makes use of partial views to decide what to draw in the view based on the user's permissions (If the user is in group A then show control A, if the user in group B then show control B or possibly if the user is in group A don't include the control at all). Also, my model is very flat so I'm not sure the built-in ability to apply my ViewModel to a specific portion of the view will help. My solution to this problem is to provide an action in my controller that responds with an object in JSON format with that contains the JQuery selector and the content to assign to the "data-bind" attribute and bind the ViewModel to the View in the $(document).ready event using the values provided. Failed Proof-of-concept My first attempt at proving that this works doesn't actually seem to work, and by "doesn't work" I mean it just doesn't bind the values at all (as can be seen in this jsfiddle). I've tried it with the applyBindings inside of the ready event and not, but it doesn't seem to make any bit of difference. Question What am I doing wrong? Or is this just not something that can work with KO (though I've seen at least one example online doing the same thing and it supposedly works)? Like I said in the preface, I've only ever pretended to be a JS developer (though I've generally gotten it to work in the past) so I'm at a loss where to start trying to figure out what I'm doing wrong. Hopefully this isn't a real noob question.

    Read the article

< Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >