Search Results

Search found 28441 results on 1138 pages for 'ubuntu lts'.

Page 288/1138 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >

• Ubuntu 11.04 does not detect my tata photon +

  - by nikhil

  I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

  Read the article

• Cannot mount a CIFS network share on Ubuntu over VPN

  - by Aron Rotteveel

  I have setup u VPN connection to our Windows 2008 server at the office and it seems to work fine. For some reason, however, I still am not able to access the network shares over a VPN connection using my standard fstab entries. When I am physically connected to the network, it works fine, but now when trying this over VPN I get the following error: mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) My /etc/fstab looks like this: //server2008/share /mnt/share cifs iocharset=utf8,credentials=/home/aron/.smbcredentials,uid=1000 0 0 As said, it works fine when physically connected, but over VPN it just wont work. Any help is appreciated.

  Read the article

• Ubuntu 12.04 does not recognise CD

  - by Venkat Kotra

  ~$ wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'MATSHITA' 'DVD-RAM UJ8B1AS' ------------------------------------------------------------------------- But I don't find access to CD. Kindly let me know how to rip the CD. When I try to mount, it gives error. ~$ mount /dev/sg1 can't find /dev/sg1 in /etc/fstab or /etc/mtab

  Read the article

• Ubuntu 12.04 connected to wireless network but internet not working

  - by A.J.

  I can connect to my house's wireless network just fine, but when I'm connected I can't browse the web. Firefox starts connecting to a site and then just poops out. This doesn't happen on my roommates' computers (running Windows) or on our 3DSes, so I know it's just my laptop. I already tried sudo dhclient -r sudo dhclient sudo ifconfig eth0 down sudo ifconfig eth0 up Results of a few commands I was asked to run in comments: ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. ^C --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (173.194.33.38) 56(84) bytes of data. --- google.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1006ms nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 88:AE:1D:6B:4E:E7 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off - Device: wlan0 [JUSTICE] ----------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: connected Default: yes HW Address: 1C:65:9D:65:C6:31 Capabilities: Speed: 1 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) HOME-9B18: Infra, 00:26:F3:53:9B:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 34 WPA WPA2 cougdad48 Network: Infra, 60:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 22 WPA2 cougdad48 Guest Network: Infra, 66:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA2 belkin.ade: Infra, 94:44:52:FF:8A:DE, Freq 2457 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 *JUSTICE: Infra, 00:24:01:7B:9F:7E, Freq 2462 MHz, Rate 54 Mb/s, Strength 88 WEP CenturyLink: Infra, B2:B2:DC:8E:E2:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 IPv4 Settings: Address: 192.168.0.11 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 (JUSTICE is my home's network.) ping -c 2 198.168.0.1 PING 198.168.0.1 (198.168.0.1) 56(84) bytes of data. --- 198.168.0.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms

  Read the article

• Stateless layout switching in Ubuntu 14.04

  - by ulidtko

  I use extensively two keyboard layouts (latin for English, and cyrillic for Ukrainian and Russian), and it bothers me to experience my mode errors because of the additional bit of UI state: the current layout. I used to eliminate them completely by using stateless layout switching, whereby one has no next layout action (as such an action is based on the current state, which is easy to forget for the user, and so leads to errors), rather only two actions: enable latin layout; enable cyrillic layout. This was trivially accomplishable in pre-Saucy releases. As illustrated on the screenshot above. However, that settings window was destroyed in Saucy. How do I get my stateless switching now?

  Read the article

• Netdisco for Ubuntu server

  - by BrNathan

  Has anyone had luck installing netdisco through apt-get? I couldn't get it to work. I tried netdisco-frontend, netdisco-backend, netdisco-common, netdisco-installer. I used the command: sudo apt-get install netdisco-common netdisco-frontend netdisco-backend Everything installed fine, but I can't get it running. It doesn't seem to have install to /usr/local/netdisco/. I have looked all over the internet and there doesn't seem to be an easy way to do this. I use server 12.04. Thanks!

  Read the article

• Ubuntu 12.04.3 - Graphics Driver: Default vs Nvidia 319-recommended vs Nvidia 319-updated

  - by Navraj

  Background: I switched from default driver to Nvidia-319-recommended. I am guessing that this update has caused issues with Keyboard shortcuts, battery status icon disappearing as well as power management issues as speculated by others. Closing laptop lid no longer suspends laptop - It has to be manually done by licking 'suspend' before closing lid. Question: How do you restore the original/default graphics driver? Thanks for your help. Regards

  Read the article

• Ubuntu 64-bit 12.04 installation dvd boot problem blank screen

  - by user877329

  I get blank screen when trying to install UbuntuStudio 64-bit DVD (i tried to install from DVD not USB stick). When using nosplash and no quiet i see that it hangs when it tries to load the nouveau driver for my GeForce GT 630 so it looks like there is a problem with support for my graphics card. After installation, I tried to install the binary nvidia current driver from package manager, but then, i just get a text terminal after rebooting. Any solution?

  Read the article

• Ubuntu 12.04 suddenly will not boot after compiz crash on lockscreen

  - by schonjones

  Yesterday i went to work and closed my laptop. When i got home I couldn't get the lock screen to come back up. ctrl+alt+f2 to get to a terminal and Tried to kill compiz, compiz was not running so I tried to restart it got an error opening the display so i tried to restart lightdm again couldn't open display. so I restarted and now I am stuck on the loading screen. I tried booting in recovery mode and all options hang except root, but i'm stuck with read only. booting from a live cd I can mount the drive but again stuck with read only. I'm completely stuck here. checking my default-display-manager returns "/usr/sbin/elsa" as the only line and can't edit it. I've got an 11.10 live cd and my /home is encrypted so i can't try to back anything up at the moment either. How can i resolve this or at the least back up some of my data? Please help!

  Read the article

• Ubuntu Software Centre Issue (unity 11.10) after broken sun-java6-jre package installation

  - by Stephen Myall

  I have been installing software packages from USC and I am getting the following error message. Worked fine one minute then the message below. Tried to search but couldn't find a solution Previously I was installing the sun-java6-jre package in terminal and had an connection outage and it didnt complete. I attempted an apt-get -f install with no success. i dont know what to try next. I'm relatively new to Linux. The answer provided with a similar question on this site didnt resolve the issue for meClick on this link An unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Details File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1092, in _simulate_helper return depends, self._cache.required_download, \ File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 235, in required_download pm.get_archives(fetcher, self._list, self._records) SystemError: E:I wasn't able to locate a file for the sun-java6-jre package. This might mean you need to manually fix this package. Terminal Output Link http://dl.dropbox.com/u/48466855/Terminal%20output.odt

  Read the article

• Bluetooth pairing of nokia with acer ubuntu 12.04

  - by Aneesh karthik C

  I have a Nokia 2700 classic phone. I tried installing obextool and Nokuntu. I run Nokuntu and find that every icon is enabled except for the Nokia Communication Centre, (it is greyed but is precisely what I need to be working!) I even tried connecting phone to laptop with a USB cable, and the same problem props up. I can also browse the contents of the phone as well as the memory card, in whichever way, either the Nautilus or Obextool file manager. The only issue that needs sorting is the communication centre.

  Read the article

• How do I fix DNS resolving which doesn't work after upgrading to Ubuntu 13.10 (Saucy)

  - by Witek

  After upgrade to 13.10 my DNS resolving fails. It seams the DNS servers which I get by DHCP (LAN) are not used. I could temporary solve the problem by adding nameserver 8.8.8.8 to /etc/resolv.conf. But then the intranet hosts still can not be resolved. When clicking on the Connection Information menu item on the network indicator, the Primary DNS and the Secondary DNS are set correctly. But my computer seams not to use them. So my questions: What should I put into resolv.conf, if anything? How to find out, which name servers my computer is querying? Where to look next, to find out, why name servers received by DHCP are not used?

  Read the article

• vgaswitcheroo isn't working in Ubuntu 12.04

  - by Forbidden404

  I always used vgaswitcheroo to turn off my discrete graphic, I did a script to turn off in boot, but now, vgaswitcheroo isn't working anymore, I don't know why... look forbidden404@forbidden404-Inspiron-N5110:~$ ls -l /sys/kernel/debug/vgaswitcheroo/switch ls: cannot access /sys/kernel/debug/vgaswitcheroo/switch: Permission denied forbidden404@forbidden404-Inspiron-N5110:~$ grep -i switcheroo /boot/config-* /boot/config-3.2.0-20-generic:CONFIG_VGA_SWITCHEROO=y /boot/config-3.2.0-23-generic:CONFIG_VGA_SWITCHEROO=y /boot/config-3.2.0-24-generic:CONFIG_VGA_SWITCHEROO=y forbidden404@forbidden404-Inspiron-N5110:~$ sudo su [sudo] password for forbidden404: root@forbidden404-Inspiron-N5110:/home/forbidden404# echo OFF > /sys/kernel/debug/vgaswitcheroo/switch bash: /sys/kernel/debug/vgaswitcheroo/switch: No such file or directory root@forbidden404-Inspiron-N5110:/home/forbidden404# ls -l /sys/kernel/debug/vgaswitcheroo/switch ls: cannot access /sys/kernel/debug/vgaswitcheroo/switch: No such file or directory And I'm not using any proprietary driver, k?

  Read the article

• Sound is not working correctly on Ubuntu 12.04

  - by Jeggy

  I know this is my own fault. But what i did was this first i wrote this command 'sudo apt-get remove pulseaudio' and then i wrote again 'sudo apt-get install pulseaudio' and now the sound doesn't work properly And the Indicator doesn't work either, it's just grayed out. The shortcuts are not working either. Alsamixer is working, and this is the only way i change change the volume at the moment: jeggy@jeggy-XPS:~$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf1c00000 irq 52 jeggy@jeggy-XPS:~$ aplay -l **** List of PLAYBACK Hardware Devices **** ALSA lib conf.c:1686:(snd_config_load1) _toplevel_:11:0:Unexpected end of file ALSA lib conf.c:3406:(config_file_open) /etc/asound.conf may be old or corrupted: consider to remove or fix it /usr/bin/pulseaudio: error while loading shared libraries: libpulsecommon-1.1.so: cannot open shared object file: No such file or directory card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 VLC sound is not working, am getting this error:

  Read the article

• upgrade from ubuntu 13.04 to 13.10 causes vmware workstation 9 problems

  - by dan

  so, upgrade caused problem where running vmware ws 9 needed patches to accommodate linux kernal 3.11. I applied those fixes I found that others reported, and now i can only run vmware ws 9 from sudo. If i run it from standard user, it says it wants to recompile modules, which it does not do unless I open up a terminal and run sudo vmware. that works, but would like it to work correctly, have the modules that are recompiled stick. when running under sudo vmware, it does recompile with errors.. (vmware-unity-helper:13019): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine", and starts up and works ok. any ideas? thanks for any help you can provide

  Read the article

• Joining Two MKV files in Ubuntu?

  - by Ryan McClure

  I have an opera that I'm ripping to my computer in MKV format with Handbrake. This opera is on two discs. Is there a way to join the resulting MKV's together? They will have the same bitrate, resolution, etc. If I do this, can I keep chapters from both MKV files organized? And, since I have subtitles in the file (not burnt in), will they still stay intact? I'm not too sure if this question is off-topic or not. If it is, feel more than free to delete it. :)

  Read the article

• Software Center doesn't open (elementary luna - ubuntu 12.04)

  - by zbiba

  When i try to open software center on elementary luna i get the bellow error.... ERROR:root:DebFileApplication import Traceback (most recent call last): File "/usr/share/software-center/softwarecenter/db/init.py", line 4, in from debfile import DebFileApplication, DebFileOpenError File "/usr/share/software-center/softwarecenter/db/debfile.py", line 25, in from softwarecenter.db.application import Application, AppDetails File "/usr/share/software-center/softwarecenter/db/application.py", line 27, in import softwarecenter.distro File "/usr/share/software-center/softwarecenter/distro/init.py", line 198, in distro_instance = _get_distro() File "/usr/share/software-center/softwarecenter/distro/init.py", line 175, in _get_distro distro_class = getattr(module, distro_id) AttributeError: 'module' object has no attribute 'debian' Traceback (most recent call last): File "/usr/sbin/update-software-center", line 38, in from softwarecenter.db.update import rebuild_database File "/usr/share/software-center/softwarecenter/db/update.py", line 33, in from softwarecenter.distro import get_distro File "/usr/share/software-center/softwarecenter/distro/init.py", line 198, in distro_instance = _get_distro() File "/usr/share/software-center/softwarecenter/distro/init.py", line 175, in _get_distro distro_class = getattr(module, distro_id) AttributeError: 'module' object has no attribute 'debian'

  Read the article

• I cannot install anything in ubuntu that has dependency problem

  - by phpGeek

  I wanted to install teamviewer on linux 64-bit system. What I did was to download teamviewer.deb file and install it as below: sudo dpkg -i install teamviewer.deb Then I wanted to correct dependency problem so I issued the following command: sudo apt-get install libc6:i386 libgcc1:i386 libasound2:i386 libfreetype6:i386 zlib1g:i386 libsm6:i386 libxdamage1:i386 libxext6:i386 libxfixes3:i386 libxrender1:i386 libxtst6:i386 I got the following error: E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies I then tried: sudo apt-get install -f Again I got the following error: E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies Even I tried to install gdebi, but I got the above error again. I emptied archives folder: sudo apt-get clean sudo apt-get update sudo apt-get upgrade Again I have problem installing my deb package. Is there anything I could do now to solve this problem? I've read the below article as well: Install Teamviewer using a 64-bits system but I get a dependency error EDIT: I found libperl5.14:amd64 as a broken package. I used: sudo apt-get remove libperl5.14:amd64 I got the following message: E: Unable to locate package Broken

  Read the article

• Brocken package for libavcodec54 & libx264-123 in ubuntu 14.04LTS

  - by Kachavarapu Ajay

  $ sudo apt-get install -f [sudo] password for ajay: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libx264-123 The following NEW packages will be installed: libx264-123 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. Need to get 0 B/345 kB of archives. After this operation, 1,005 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 166965 files and directories currently installed.) Preparing to unpack .../libx264-123_0.123.2189+git35cf912-1ubuntu4_amd64.deb ... Unpacking libx264-123:amd64 (2:0.123.2189+git35cf912-1ubuntu4) ... dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/libx264-123_0.123.2189+git35cf912-1ubuntu4_amd64.deb (--unpack): cannot copy extracted data for './usr/lib/x86_64-linux-gnu/libx264.so.123' to '/usr/lib/x86_64-linux-gnu/libx264.so.123.dpkg-new': unexpected end of file or stream Errors were encountered while processing: /var/cache/apt/archives/libx264-123_0.123.2189+git35cf912-1ubuntu4_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Packard Bell TK11 Wifi not working (Ubuntu 12.10)

  - by Ingmar

  Hardware: Packard Bell EasyNote TK11BZ, BIOS version 1.15 Broadcom BCM43227 802.11 b/n/g Problem: Everything works as it should, except the wireless connection. The Wifi device is enabled in the "Additional Drivers" section of Software Sources, but does not even show up in the network manager drop-down. sudo lshw -C network: *-network UNCLAIMED description: Network controller product: BCM43227 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0100000-f0103fff

  Read the article

• Screen resolution is too low with open source drivers on Ubuntu 12.10

  - by Chintan Parikh

  I'm on an AMD graphics card. When I use the open source xserver-xorg-video-radeon driver, Gnome shell works fine but my screen resolution can't be set higher than 1024x768. However, when I'm on the closed source fglrx drivers, the screen resolution works fine, but gnome shell doesn't (it goes to gnome classic for some reason). Does anyone know how I can either get gnome shell to work with fglrx, or how I can set my screen resolution with xserver-xorg-video-radeon?

  Read the article

• No sound while playing multi-media in Ubuntu 12.04 for XPS15

  - by ved2254

  I have an XPS15 laptop, core i5, 8GB ram. Whenever I login my laptop I here the startup bongo sound. But my sound system just doesn't play anything, may it be a short audio clip or a movie. Output of lshw -c multimedia is : WARNING: you should run this program as super-user. *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:51 memory:f1c00000-f1c03fff WARNING: output may be incomplete or inaccurate, you should run this program as super-user. Headphones work just fine but there is no sound from the speakers. Is it a bug in multi-media players or ALSA?

  Read the article

• Ubuntu 12.04 - Unable to change brightness

  - by Raymond Standen

  So, as a number of users seem to be experiencing, I am unable to change brightness on my laptop. Using the Brightness and Lock in settings, the slider moves but brightness does not adjust. The fn keys work for volume but not for brightness. I have updated my drivers and installed all updates, however the brightness is still at maximum. I have heard that opening sudo gedit /etc/x11/xorg.conf and entering Option "RegistryDwords" "EnableBrightnessControl=1" can fix this, however when opening xorg.conf through Terminal I am greeted with a blank document... Not very reassuring. Toshiba L750 Laptop Nvidia Graphics Card Dual boot with Windows

  Read the article

• Ubuntu 12.10 TexLive 2012: Latex file would not compile

  - by Indian

  I wrote a long report with chapters using TexLiVE 2009. When I move to 12.10, the system had upgraded to Texlive 2012. However, I found that some fonts were not working, whereas they were a part of the distribution (Texlive). Therefore, I uninstalled the whole thing (TexLive) and then reinstalled. Compilation command pdflatex myreport.tex I now have the following error while compiling: This is pdfTeX, Version 3.1415926-2.4-1.40.13 (TeX Live 2012/Debian) \write18 enabled kpathsea: Running mktexfmt pdflatex.fmt I can't find the format file 'pdflatex.fmt'! How do I solve this issue?

  Read the article

• How can a usb be detected but not show up anywhere?

  - by George Mauer

  I started the morning by trying to create a bootable usb using a 2gb stick and the startup disk creator. It seemed to run through the whole process just fine until it got to a screen that read something like "Creating memory partion" and which sat on 100% for about 45 minutes before I hit cancel and removed the usb stick. Now the usb stick is not being detected as storage or...anything (even on my windows pc) though it does show up in the syslog. Allow me to demonstrate. We start with the usb not plugged in: [georgemauer@ubuntu:~]$ sudo fdisk -l (04-04 16:01) Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x994bdc0f Device Boot Start End Blocks Id System /dev/sda1 2048 27650047 13824000 27 Hidden NTFS WinRE /dev/sda2 * 27650048 27854847 102400 7 HPFS/NTFS/exFAT /dev/sda3 27854848 976771119 474458136 7 HPFS/NTFS/exFAT I plug in the usb: [georgemauer@ubuntu:~]$ tail -f /var/log/syslog ***Snip*** Apr 4 15:01:18 ubuntu wpa_supplicant[1136]: WPA: Group rekeying completed with 00:24:36:ad:e7:3f [GTK=TKIP] Apr 4 15:02:29 wpa_supplicant[1136]: last message repeated 3 times Apr 4 15:02:29 ubuntu kernel: [22122.788133] usb 2-1: new high speed USB device number 13 using ehci_hcd Apr 4 15:02:29 ubuntu kernel: [22122.923873] scsi10 : usb-storage 2-1:1.0 Apr 4 15:02:29 ubuntu mtp-probe: checking bus 2, device 13: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1" Apr 4 15:02:30 ubuntu mtp-probe: bus: 2, device: 13 was not an MTP device Apr 4 15:02:30 ubuntu kernel: [22123.926154] scsi 10:0:0:0: Direct-Access GENERIC USB Mass Storage 1.00 PQ: 0 ANSI: 2 Apr 4 15:02:30 ubuntu kernel: [22124.105118] sd 10:0:0:0: Attached scsi generic sg1 type 0 Apr 4 15:02:30 ubuntu kernel: [22124.108212] sd 10:0:0:0: [sdb] Attached SCSI removable disk but then: [georgemauer@ubuntu:~]$ ls /mnt -alF (04-04 16:02) total 8 drwxr-xr-x 2 root root 4096 2011-04-21 12:51 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ [georgemauer@ubuntu:~]$ ls /media -alF (04-04 16:03) total 8 drwxr-xr-x 2 root root 4096 2012-04-04 12:18 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ What could be going on and how do I recover my usb key?

  Read the article

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >