Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 289/372 | < Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >

• How to disable 3G USB Modem internal storage from being loaded by linux kernel?

  - by Krystian

  Hi, I've got a problem with my 3G modem [Huawei E122]. It has internal storage and kernel assigns a device [/dev/sdX] to it. Because of that, every second time my machine will not boot - kernel panic - as my usb hdd gets assigned /dev/sdb instead of /dev/sda. I cannot use LABEL nor UUID in root= kernel parameter, as it is only available when using initrd, and I can't use it - I am using Debian on my router - mips architecture machine. I have to prevent this from happening, as my router has to start everyday and I have to be sure it works ok. I don't have physical access to restart it when something goes wrong. I don't use my modem internal storage, there's no SD card inserted. However kernel detects the reader and loads it. I can not prevent loading od usb drivers since my hdd is on USB as well. I will appreciate any ideas.

  Read the article

• How do I setup a Gnome 3.2 VPN connection (Fedora 16)

  - by mpeters

  I just switched to Gnome 3 on a new laptop to try it out. Lots of things are different, but I think I can get used to them. But I'm having a real problem trying to figure out how to get the new network manager to setup a VPN through the GUI. I have openvpn, NetworkManager and NetworkManager-openvpn installed, but when I click on the network icon in gnome-shell there is nothing about vpn connections in there. When I click the "Network Settings" link in that menu I just see menus for Wired, Wireless and Network Proxy and none of those screens has anything for VPN connections either. Any suggestions about where I need to look to setup my connections and how to make it easier connect when I need to?

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• Can I use only a HDMI monitor?

  - by Felix

  I recently found out there are such things as PC monitors with TV capabilities (or TVs that can be PC monitors), and the idea kind of tickles my fancy. I'm thinking of getting one of these gadgets, and if I do, I will connect it to my PC via HDMI (my graphics card has builtin HDMI), so that I also get sound to the TV. The reason for this is because I have a 2.1 sound system which I want to use both on the PC and the TV. Basically, I want the configuration to look like this: Cable --------> TV --> 2.1 Sound System PC --HDMI--> TV --> 2.1 Sound System My question is: can I use a setup like this? Can I not have a classic VGA monitor? Will I be able to see non-graphical interfaces (such as the BIOS, GRUB, a Linux terminal, ...) through HDMI on the TV? I use Windows 7 and Ubuntu.

  Read the article

• Windows 7 Won't find Lexmark X4550

  - by cameronoleav

  I just got Lexmark X4550 wireless printer and want to have it installed on my laptop Windows 7 Beta. I have installed using Lexmark drivers and doing a "add a printer" device search. But when I tried to print a document i got an error message: "Communication not available. The printer cannot communicate with the computer...". This pinter used to work perfectly on my Windows XP Pro SP3. Any help would be greatly appreciated.

  Read the article

• Why does my laptop shut down, does it get too hot?

  - by Kevin P.

  When I play games, or use powerful-applications such as Autodesk Maya, my laptop just shuts down, ofcourse without any warning at all. This is what I've tried so far: Cleaned my fan, completely! Checked if I have enough RAM and good enough graphics card, and I do. (6 GB RAM, Nvidia GeForce GT540M with 2 GB VRAM) None of these options worked. Even tried to clean my fan twice! Now, I have some options I could also try, but I don't know if that have anything to do with it or not. I was thinking reinstalling my Windows 7, because maybe it has to do something wrong with the installation? My laptop is about a year old, and this problem just happend out of no where, short after I downgraded from Windows 8 Release Preview to my original Windows 7.

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• Can't change picture import settings in Windows 7

  - by Joel in Gö

  I have foolishly set the picture import settings wrongly for when a camera card is put in my computer. It correctly asks me whether I would like to import the pictures using Windows picture import, and when I click on this option it flashes up the "import pictures" dialog very briefly, and then immediately gets on with importing the pictures to the wrong place. I simply want to click on the "import settings" link on the dialog - but it's too quick for me, and even if I do manage it it just ignores me. Windows Help, useful as ever, tells me to click on the link :) Any ideas? Thanks!

  Read the article

• How do I route traffic to website using a spcified network connection on Windows 7

  - by rwetzeler

  I want to route all traffic to a website over my wireless connection while the rest of the traffic using my lan. What I tried was first finding out the IP address of the website I want to go to. For example, lets say pandora.com. I found it resolves to 208.85.40.20. I have entered that entry into my hosts file. I then added that route using route add 208.85.40.20 mask 255.255.255.255 WirelessIP. It doesn't seem to work however. Instead of using the IP address, is there a way that I can just say.. this URL to route over that connection? Does anyone know of a program that I can install that will do this.. possibly some sort of proxy or a software load balancer that can do this?

  Read the article

• Is there a way to reliably backup and restore a complex network configuration on Windows XP?

  - by djangofan

  I have some Windows XP laptops (10+) that host a ad-hoc WIFI network connection to wireless PDA devices. The laptop itself is connected via a 3rd party VPN radio network. The radio network itself seems to be reliable. If one small thing goes wrong with the network configuration then the PDA loses connectivity and so I need a way to backup a networking config , either via a script or a 3rd party program, so that I can restore a working network configuration if something goes wrong. Is this possible? Does anyone have any ideas?

  Read the article

• How can I ensure my Samsung Series 7 is actually using the Radeon switchable graphics?

  - by patricksweeney

  I have a Samsung Series 7 with the Radeon 6750M switchable graphics. The ATI software lets you force programs to use the dedicated card. However, I'm not convinced it is actually ever using it, as the frame rates on some non-taxing games (Portal, TF2) are merely OK. To make matters worse, it looks like the ATI Catalyst Control has vanished from my laptop. To make it even worse, you can't download the driver and ATI CCC from ATI's site, you need to download it from Samsung, and the ZIP they provide is corrupted. How can I ensure my Samsung Series 7 is actually using the Radeon switchable graphics?

  Read the article

• Why does my webpage look different when I connect using different routers?! Does routers cache files?

  - by Ayyash

  Here is the case, I am working on a site from office and home, I recently updated the stylesheets and logged in the live site from office (using my same laptop I use all the time), and everything looks okay, I come home use my home internet connection to connect to the site using the SAME laptop, the styles are not updated! The thing is: this happens on ALL browsers, and after emptying the cache many times, and even after one month of work, and even if I have never opened the site before on that browser (as if my router has a cache of its own) Another thing: only one particular styles.css file seem to be hanging Extra info: I use the same IP for my home wireless router as that defined in the office, the usual 192.168.0.1

  Read the article

• Windows 7 & kodak printer esp 7

  - by Yoraf

  I have bought a new PC with Windows 7 and a Kodak wireless printer esp 7. I can't download the software always unsuccessful and can't connect to my printer. Any suggestions? Edit (from the other, duplicate question): Still having problems with printing. I did get it working by removing 'bonjour' but turned on yesterday and hey presto it's not working again. The printer is installed and showing as disconnected. Any ideas now? The chat doesn't work with Windows 7, I have downloaded the latest version, they take ages to answer emails, need to print stuff urgently. It's driving me insane!! Please help.

  Read the article

• Best DSL hardware for ADSL Troubleshooting

  - by Jeff Sacksteder

  I have a situation where I need to make the best of a bad DSL situation. The CPE is a black box with no access to DSL diagnostics. My plan is to get some sort of DSL hardware that exposes link-layer state and gives me knobs to tweak. I'd like to be able to mitigate bufferbloat as much as I can while I'm at it. The obvious choice would seem to be a Sangoma card in a linux system. I have no way of knowing if that will do anything for me without testing it, however. I have no other access to WAN troubleshooting equipment. Are there any other options avail to me as a consumer?

  Read the article

• Frame rate upsampling codec/player/software?

  - by djechelon

  Hello, I recently noticed that when I play both HD and SD videos on my HDMI TV at 1080p 60Hz from my computer, the motion is not fluid as I would expect. As far as I know, it could be because the 24fps video needs to be upsampled by the codec to match the 60Hz output of the monitor. But, as far as I know, the upsampling is done by simply repeating each photogram for a certain amount of frames. I usually play MKV videos with VLC. Do you know if there is a player or codec that performs the upsampling by interpolation like some 100Hz TVs do? I recently saw an LG led TV play a 24fps 720p video at 100Hz with an incredible motion fluidity, and I simply wonder why can't my computer do! I have an NVidia card. Does PureVideo help? I'm a noob with these things. Thank you.

  Read the article

• Windows 7 Line In Delay Issue [closed]

  - by CheeseConQueso

  Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

  Read the article

• How can I convert and repair MPEG-TS (DVB-S captures) for better playback?

  - by SofaKng

  I have a lot of MPEG-TS video files (H.264 video with AC3 or MP3 in a .TS container) captured from a DVB-S capture card. When I play these videos it's much slower to seek in the video (ie. skip 30 seconds, etc) than with other files. I'm not sure if the problem is the H.264 encoding (reference frame count?) or the MPEG-TS container, or if the MPEG-TS file contains sync errors, etc. Does anybody have a good workflow for converting and repairing these files?

  Read the article

• xen hotplug can't add vif to eth0: operation not supported

  - by John Tate

  I am new to xen and I am trying to get a domU running but I am having problems with it. I think my network card might not support bridging which is bizarre. This is the error I get when trying to create the domU [root@hyrba ~]# xm create sardis.secusrvr.com.cfg Using config file "/etc/xen/sardis.secusrvr.com.cfg". Error: Device 0 (vif) could not be connected. Hotplug scripts not working. All the xen kernel modules are loaded... xen_pciback 52948 0 xen_gntalloc 6807 0 xen_acpi_processor 5390 1 xen_netback 27155 0 [permanent] xen_blkback 21827 0 [permanent] xen_gntdev 10849 1 xen_evtchn 5215 1 xenfs 3326 1 xen_privcmd 4854 16 xenfs I get this error in /var/log/xen/xen-hotplug.log RTNETLINK answers: Operation not supported can't add vif2.0 to bridge eth0: Operation not supported can't add vif2.0-emu to bridge eth0: Operation not supported

  Read the article

• No internet access on Windows 7 - part 2

  - by Vnuk

  This is a continuation of my previous question. The problems started when I turned on my wireless connection for the first time. Since then, every time I boot my Windows 7, my LAN connection does not have internet access. In my previous question, I got a key answer (route delete). Now my procedure to get LAN internet connectivity (local network works fine) when I boot looks like this: Power on WLAN Disconnect LAN cable Power off WLAN Execute route delete 0.0.0.0 if 11 Connect LAN cable Now my LAN connection has internet access. Another behavior that I can't explain - while my LAN connection has no internet access, Network and Sharing center refers to it as Unknown network, with a public icon. When I go through the fore mentioned procedure, it is referred to with my home WLAN network name, with status connected, and the Unknown network disappears.

  Read the article

• VirtualBox cloned Ubuntu Server network error

  - by Luke

  I run a number of virtual servers on my network and I want to be able to easily clone base installations of Ubuntu Server. I use the VBoxManage command to clone the actual hard disk and I then create a new profile for my VM and copy over the settings of the original VM. However, when I boot into the cloned VM, there seems to be a network problem. When I issue a PING I get the message "Network unreachable". I traced it down to the fact that the virtual network card of the cloned VM has a different MAC address then the original VM. When I copy the MAC address the clone seems to work fine. How can I have the cloned VM have it's own MAC address?

  Read the article

• Is there any way I can use two monitors in the console in Linux?

  - by Alex

  I have recently become the proud owner of two monitors in my workspace. (Ok not owner, but you know what I mean) and I'd like to use both of them at once. Problem is, I much much prefer to use a Linux Server console over a desktop environment. The graphics card on the machine is a GTX295 (don't ask why, it's a long story.) so I essentially have two graphics cards. Each has a DVI output. Is there any way I can get the console to stretch across two screens? Or will I have to install a desktop Ubuntu for this to work?

  Read the article

• Why are my downloads up to ~1500KByte/sec only, when the ADSL connection locks at 13611Kbit/s?

  - by leladax

  No uploading is going on other than the overhead of downloading which appears to be not high for the abilities of the connection: Only about 30-40KByte/s when the router locks at 1012Kb/s and other direct uploads or uploading overheads can reach more than 100KByte/sec so I don't think it's a congestion at uploading that is doing it. Is there something I miss? Because I assume 13611Kbit/s should be ~1701Kbyte/sec. Is it an overheard at the ADSL level I don't understand? Could it be the ISP doing it? If it's active throttling it can't be on single connections since 2 high speed connections still go up to ~1500KByte/sec. It's not an example on torrents or other complex situations. The tests were on Ethernet, but I doubt the results would be different on wireless. I wonder if the settings of those connections at my end could be doing it, e.g. MTU settings, though I haven't touched the defaults of a common Realtek NIC.

  Read the article

• what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

  - by Michael Borgwardt

  When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

  Read the article

• BSOD after PC has been running for a while

  - by user1389999

  I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

  Read the article

< Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >